Olympus VR-320 manual

User manual for the Olympus VR-320 in English. This PDF manual has 76 pages.

Page: 1
Instruction Manual VR-330/D-730 VR-330/D-730 VR-320/D-725 VR-320/D-725 VR-310/D-720 VR-310/D-720 DIGITAL CAMERA ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for VR-330/D-730.
Page: 2
2 EN Step 1 Other accessories not shown: warranty card Contents may vary depending on purchase location. Checking the contents of the box LI-42B Lithium Ion Battery USB cable OLYMPUS Setup CD-ROM Step 2 Preparing the Camera “Preparing the Camera” (p. 12) Step 3 Shooting and Playing Back Images “Shooting, Viewing, and Erasing” (p. 19) Step 4 How to Use the Camera “Camera Settings” (p. 3) Step 5 Printing “Direct printing (PictBridge)” (p. 48) “Print Reservations (DPOF)” (p. 52) Contents Contents Names of Parts............................................... 8 Preparing the Camera.................................. 12 Shooting, Viewing, and Erasing ................. 19 Using Shooting Modes ................................ 26 Using Shooting Functions .......................... 30 Menus for Shooting Functions ................... 34 ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions...................................................... 38 Menus for Other Camera Settings.............. 41 Printing.......................................................... 48 Usage Tips.................................................... 55 Appendix....................................................... 60 ¾ ¾ ¾ ¾ ¾ Strap AV cable F-2AC USB-AC adapter or Digital camera
Page: 3
3 EN Camera Settings Using the Direct Buttons Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. Arrow pad H (left) G (down) / D button (erase) (p. 23) F (up) / INFO button (change information display) (p. 22, 24) I (right) Q button (p. 17) The symbols FGHI displayed for image selections and settings indicate that the arrow pad is to be used. NORM OK Single Print Print 4/30 4/30 More 12:30 ’11/02/26 ’11/02/26 12:30 NORM 14M FILE 100 0004 100 0004 02 26 12 30 : . . 2011 OK Set X Y M D Time MENU Cancel Y/M/D Y/M/D Zoom lever (p. 21, 24) Shutter button (p. 20) R button (shooting movies) (p. 20) q button (switch between shooting and playback) (p. 20, 22) m button (p. 5) E button (menu guide) (p. 25)
Page: 4
4 EN Using the Menu Using the Menu Use the menu to change camera settings such as the shooting mode. There may be menus that are unavailable depending on other related settings or the s mode (p. 26). Function menu Function menu Press H during shooting to display the function menu. The function menu is used to choose the shooting mode and provides access to frequently used shooting settings. To select the shooting mode Use HI to select a shooting mode and press the Q button. To select the function menu Use FG to select a menu and use HI to select a menu option. Press the Q button to set the function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Program Auto Program Auto 14M NORM Shooting Function menu Shooting mode P P Selected option Setup menu (p. 5)
Page: 5
5 EN 1 Press the m button. The setup menu is displayed. MENU OK Set Exit Digital Zoom Off Image Stabilizer On AF Mode Face/iESP 1 2 1 2 AF Illuminat. On Compression Normal Image Size 14M Reset Reset 2 Press H to highlight the page tabs. Use FG to select the desired page tab and press I. MENU OK Set Exit 1 2 1 2 Power Save Off TV Out Bright English World Time Pixel Mapping Page tab MENU OK Set Exit 1 2 1 2 Power Save Off TV Out Bright English World Time Pixel Mapping Pixel Mapping Submenu 1 3 Use FG to select the desired submenu 1 and then press the Q button. 1 2 1 2 MENU OK Set Exit TV Out Bright English World Time Pixel Mapping Power Save Off Power Save Off 1 2 1 2 Bright World Time W English TV Out Pixel Mapping MENU OK Set Back Power Save Off Power Save Off Power Save On Off Off Submenu 2 ● 4 Use FG to select the desired submenu 2 and then press the Q button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 34 to 47) 1 2 1 2 MENU OK Set Exit TV Out Bright English World Time Pixel Mapping Power Save On Power Save On 5 Press the m button to complete the setting. ● Setup menu Setup menu Press the m button during shooting or playback to display the setup menu. The setup menu provides access to a variety of camera settings, including options not listed in the function menu, display options, and the time and date.
Page: 6
6 EN Menu Index Menus for Shooting Functions 1 Shooting mode P (Program Auto) .............p.19 M (iAUTO)...................p.26 s (Scene Mode) .........p.26 P (Magic Filter) ..........p.27 ~ (Panorama)..................p.28 D (3D Photo)*1 .................p.25 2 Flash.................................p.30 3 Macro ...............................p.30 4 Self-timer..........................p.31 5 Exposure compensation...p.31 6 White balance...................p.32 7 ISO ...................................p.32 8 Drive.................................p.33 9 # (Setup) X p (Shooting menu 1) Reset...........................p.34 Image Size ..................p.34 Compression ...............p.34 AF Mode......................p.35 Digital Zoom ................p.36 Image Stabilizer...........p.36 AF Illuminat. ................p.37 q (Shooting menu 2) Icon Guide...................p.37 Date Stamp .................p.37 A (Movie menu) Image Size ..................p.35 Frame Rate .................p.35 IS Movie Mode ............p.36 R (Movie sound recording) ..................p.37 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Program Auto Program Auto 14M NORM 4 8 5 1 2 3 7 6 9 MENU OK Set Exit Digital Zoom Off Image Stabilizer On AF Mode Face/iESP 1 2 1 2 AF Illuminat. On Compression Normal Image Size 14M Reset Image Size VGA Frame Rate 30fps On IS Movie Mode Off 1 2 1 2 MENU OK Set Exit *1 VR-330/D-730 only
Page: 7
7 EN Menus for Playback, Editing, and Printing Functions 1 r (Settings 1) Memory Format/ Format.......................... p.41 Backup ......................... p.41 USB Connection........... p.41 q Power On ............... p.42 Keep K Settings......... p.42 Pw On Setup ................ p.42 Sound Settings............. p.42 2 s (Settings 2) Pixel Mapping............... p.42 s (Monitor) ................ p.43 TV Out*1 ........................ p.43 Video Out*2 .................... p.46 Power Save.................. p.47 W (Language)............ p.47 X (Date/time)............. p.47 World Time ................... p.47 Menus for Other Camera Settings 1 q (Playback menu) Slideshow..................... p.38 Edit ......................... p.38, 39 Erase............................ p.39 Print Order.................... p.40 ? (Protect).................... p.40 y (Rotate).................... p.40 Slideshow Edit Erase Print Order y ? MENU OK Set Exit 1 2 1 2 1 Backup q Power On Yes Format Keep K Settings Yes USB Connection Storage Pw On Setup On Sound Settings 2 1 2 1 MENU OK Set Exit 1 2 *1 VR-330/D-730 only *2 VR-320/D-725 and VR-310/D-720 only
Page: 8
8 EN Names of Parts Names of Parts Camera unit 5 2 1 3 4 10 11 9 8 7 6 1 Connector cover*1 ......... p.44 2 HDMI mini connector*1 .................................... p.44 3 Strap eyelet .................... p.9 4 Multi-connector ............ p.14, 16, 44, 46, 48 5 Battery/card compartment cover........................... p.12 6 Flash............................. p.30 7 Self-timer lamp ............. p.31 AF illuminator ............... p.37 8 Microphone............. p.37, 39 9 Lens........................ p.60, 73 10 Tripod socket 11 Speaker *1 VR-330/D-730 only
Page: 9
9 EN 3 2 1 4 8 5 6 7 9 10 11 1 n button........ p.17, 19 2 Shutter button............... p.20 3 Monitor ................... p.19, 55 4 Zoom lever ............. p.21, 24 5 R button (shooting movies) ....... p.20 6 Indicator lamp......... p.14, 16 7 q button (switch between shooting and playback) ....... p.20, 22 8 Q button (OK).............. p.17 9 Arrow pad....................... p.3 INFO button (change information display) ................. p.22, 24 D button (erase) .......... p.23 10 E button (menu guide) .................................... p.25 11 m button.................. p.5 Attaching the camera strap Attaching the camera strap Pull the strap tight so that it does not come loose.
Page: 10
10 EN Monitor Shooting mode display Shooting mode display 1/100 F3.0 F3.0 P P 1/100 z z P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO DATE 0:34 0:34 VGA # # 14M 4 4 NORM ON ON 1 2 3 4 5 6 7 8 9 10 15 16 17 13 12 11 18 19 20 21 22 23 24 25 14 1 Battery check................ p.16 2 Shooting mode ....... p.19, 26 3 Flash............................. p.30 Flash standby/flash charge .................................... p.55 4 Macro ........................... p.30 5 Self-timer...................... p.31 6 Exposure compensation .................................... p.31 7 White balance............... p.32 8 ISO ............................... p.32 9 Drive............................. p.33 10 Setup menu.................... p.5 11 Recording with sound (movies)...................... p.37 12 Date stamp................... p.37 13 World time .................... p.47 14 Image stabilization........ p.36 15 Compression (still images)................ p.34 16 Image size (still images)................ p.34 17 Number of storable pictures (still images)................ p.19 18 Current memory ........... p.62 19 Movie recording icon .... p.20 20 Continuous recording length (movies)...................... p.20 21 Image size (movies) ..... p.35 22 AF target mark.............. p.20 23 Camera shake warning 24 Aperture value.............. p.20 25 Shutter speed............... p.20
Page: 11
11 EN Playback mode display Playback mode display Normal display ● 1 Battery check................ p.16 2 3D image*1 .................... p.25 3 Print reservation/number of prints...................p.52/p.50 4 Protect.......................... p.40 5 Adding sound ............... p.39 6 Current memory ........... p.62 7 Frame number/ total number of images (still images)................ p.22 Elapsed time/ total recording time (movies)...................... p.23 8 Shooting mode ....... p.19, 26 9 Shutter speed............... p.20 10 Aperture value.............. p.20 11 ISO ............................... p.32 12 Exposure compensation .................................... p.31 13 White balance............... p.32 14 Image size.............. p.34, 35 15 File number 16 Date and time............... p.17 17 Compression (still images)................ p.34 Frame rate (movies)..... p.35 18 Volume ......................... p.42 10 10 12:30 ’11/02/26 ’11/02/26 12:30 4/30 4/30 1 7 6 5 4 3 2 16 D D Still image Movie 00:12/00:34 00:12/00:34 1 18 7 Detailed display ● 10 10 4/30 4/30 1/1000 F3.0 2.0 AUTO WB 100 ISO P NORM 14M FILE 100 0004 ’11/02/26 12:30 1/1000 F3.0 2.0 AUTO WB 100 ISO P NORM 14M FILE 100 0004 ’11/02/26 12:30 1 7 9 8 10 12 11 6 5 4 3 13 14 15 16 17 2 D D *1 VR-330/D-730 only
Page: 12
12 EN Preparing the Camera Preparing the Camera Inserting the battery and the SD/SDHC memory card (sold separately) Always use SD/SDHC memory cards with this camera. Do not insert any other types of memory card. 1 2 1 1 Battery/card compartment cover 2 Write-protect switch Battery lock knob Insert the battery with the B symbol on the same side as the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Turn off the camera before opening the battery/card compartment cover. When using the camera, be sure to close the battery/ card compartment cover. Insert the card straight until it clicks into place. Do not touch the contact area directly. 3 1 1 2 This camera allows the user to take pictures using the internal memory even when no SD/SDHC memory card (sold separately) is inserted. “Using an SD/SDHC memory card” (p. 61) “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 63)
Page: 13
13 EN To remove the SD/SDHC memory card To remove the SD/SDHC memory card 2 1 Press the card in until it clicks and comes out slightly, then grab the card and pull it out. Charging the battery and setting up using the supplied CD Connect the camera to the computer to charge the battery and use the supplied CD for setup. User registration using the supplied CD and installation of [ib] computer software is available on Windows computers only. The camera battery can be charged while the camera is connected to a computer. The indicator lamp lights during charging and turns off when charging is complete. Charging takes up to 3 hours. If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, computer, or USB cable may not be functioning as expected. We recommend that you use a computer equipped with Windows XP (Service Pack 2 or later), Windows Vista, or Windows 7. See “Charging the battery with the supplied USB-AC adapter” (p. 16) if you are using a different computer or wish to charge the battery without using a computer. ● Windows Windows 1 Insert the supplied CD in a CD-ROM drive. Windows XP A “Setup” dialog will be displayed. Windows Vista/Windows 7 An Autorun dialog will be displayed. Click “OLYMPUS Setup” to display the “Setup” dialog. If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then double-click “Launcher.exe”. If a “User Account Control” dialog is displayed, click “Yes” or “Continue”. ● ●
Page: 14
14 EN 2 Follow the on-screen instructions on your computer. If nothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Leave the camera connected to the computer until the battery has charged, then disconnect and reconnect the camera. Connecting the camera Connecting the camera Indicator lamp USB cable (supplied) Computer (on and running) Multi-connector 3 Register your Olympus product. Click the “Registration” button and follow the on- screen instructions. 4 Install OLYMPUS Viewer 2 and [ib] computer software. Check the system requirements before beginning installation. Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen instructions to install the software. ● ● ● OLYMPUS Viewer 2 Operating System Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7 Processor Pentium 4 1.3 GHz or better RAM 1 GB or more (2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) [ib] Operating System Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7 Processor Pentium 4 1.3 GHz or better (Pentium D 3.0 GHz or better required for movies) RAM 512 MB or more (1 GB or more recommended) (1 GB or more required for movies—2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) Graphics A minimum of 64 MB video RAM with DirectX 9 or later. * See online help for information on using the software. 5 Install the camera manual. Click the “Camera Instruction Manual” button and follow the on-screen instructions. ●
Page: 15
15 EN Macintosh Macintosh 1 Insert the supplied CD in a CD-ROM drive. Double-click the CD (OLYMPUS Setup) icon on the desktop. Double-click the “Setup” icon to display the “Setup” dialog. ● ● 2 Install OLYMPUS Viewer 2. Check the system requirements before beginning installation. Click the “OLYMPUS Viewer 2” button and follow the on-screen instructions to install the software. You can make user registration via “Registration” in OLYMPUS Viewer 2 “Help”. OLYMPUS Viewer 2 Operating System Mac OS X v10.4.11–v10.6 Processor Intel Core Solo/Duo 1.5 GHz or better RAM 1 GB or more (2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 32,000 colors (16,770,000 colors recommended) * Other languages can be selected from the language combo box. For information on using the software, see online help. 3 Copy the camera manual. Click the “Camera Instruction Manual” button to open the folder containing the camera manuals. Copy the manual for your language to the computer. ● ● ●
Page: 16
16 EN Charging the battery with the supplied USB-AC adapter The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. The supplied USB-AC adapter is for charging and playback only. Do not take pictures while the USB-AC adapter is connected to the camera. The camera cannot playback without the battery even when connected to the USB-AC adapter. 1 AC outlet AC outlet USB cable (supplied) USB cable (supplied) USB connector USB connector Multi-connector Multi-connector 2 Indicator lamp On: Charging Off: Charged The battery is not fully charged at the time of purchase. Before use, be sure to charge the battery until the indicator lamp turns off (up to 3 hours). If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, or USB- AC adapter may not be functioning as expected. For details on the battery and the USB-AC adapter, see “The battery and USB-AC adapter” (p. 60). The battery can be charged while the camera is connected to the computer. Charging time varies depending on the performance of a computer. (There may be cases in which it takes approx. 10 hours.) When to charge the batteries When to charge the batteries Charge the battery when the error message shown below appears. Monitor top left Error message Flashes in red 4 4 Battery Empty 14M 0:34 0:34 VGA
Page: 17
17 EN Operation guide Operation guides displayed at the bottom of the screen indicate that the m button, Q button, or zoom lever should be used. MENU OK Sel. Image Erase/Cancel Operation guide OK Set MENU OK Set Exit Digital Zoom Off Image Stabilizer On AF Mode Face/iESP 1 2 1 2 AF Illuminat. On Compression Normal Image Size 14M Reset Date, time, time zone, and language The date and time set here are saved to image file names, date prints, and other data. You can also choose the language for the menus and messages displayed in the monitor. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. X -- -- -- -- : . . Y/M/D MENU Y M D Time Cancel ---- ---- Date and time setting screen 2 Use FG to select the year for [Y]. X : . . Y/M/D MENU Y M D Time Cancel 2011 2011 -- -- -- -- ●
Page: 18
18 EN 3 Press I to save the setting for [Y]. : . . 2011 X Y/M/D MENU Y M D Time Cancel -- -- -- -- -- 4 As in Steps 2 and 3, use FGHI and the Q button to set [M] (month), [D] (day), [Time] (hours and minutes), and [Y/M/D] (date order). For a more accurate setting, press the Q button when the time signal hits 00 seconds while setting the minutes. The menus can be used to change the selected date and time. [X] (Date/time) (p. 47) 5 Use HI to select your home time zone and press the Q button. Use FG to turn daylight saving time ([Summer]) on or off. ’11.02.26.12:30 Summer OK Set Seoul Tokyo Seoul Tokyo The menus can be used to change the selected time zone. [World Time] (p. 47) 6 Use FGHI to select your language and press the Q button. The menus can be used to change the selected language. [W] (Language) (p. 47) ●
Page: 19
19 EN Shooting, Viewing, and Erasing Shooting, Viewing, and Erasing Shooting with the optimum aperture value and shutter speed [Program Auto] In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. [Program Auto] indicator 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO # # 14M 0:34 0:34 VGA Number of storable still pictures (p. 63) Monitor (standby mode screen) If the [Program Auto] indicator is not displayed, press H to display the function menu and then set the shooting mode to P. “Using the Menu” (p. 4) Current shooting mode display 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Program Auto Program Auto 14M NORM Press the n button again to turn off the camera. 2 Hold the camera and compose the shot. Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash with your fingers, etc.
Page: 20
20 EN 3 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. P P 1/400 1/400 F3.0 F3.0 AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 57) 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. P P 1/400 1/400 F3.0 F3.0 Image review screen Press fully To view images during shooting To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button or press the shutter button halfway down. ● ● Shooting movies 1 Press the R button to start recording. 0:00 REC REC 0:34 0:00 0:34 0:00 REC REC 0:34 0:00 0:34 Lights up red when recording Current length Continuous recording length (p. 63) Sound will also be recorded. The shooting mode selected for still photography applies to movies (some shooting modes have no effect). 2 Press the R button again to end recording. During sound recording, only the digital zoom can be used. To record a movie with optical zoom, set [R] (Movie sound recording) (p. 37) to [Off].
Page: 21
21 EN Using the zoom Turning the zoom lever adjusts the shooting range. W side T side 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO # # # # 14M 14M 0:34 0:34 VGA 0:34 0:34 VGA Zoom bar Model No. Optical zoom Digital zoom VR-330/D-730 12.5× 4× VR-320/D-725 12.5× 4× VR-310/D-720 10× 4× To take larger images [Digital Zoom] To take larger images [Digital Zoom] The type and amount of zoom can be identified from the appearance of the zoom bar. The display differs depending on the options selected for [Digital Zoom] (p. 36) and [Image Size] (p. 34). [Off] selected for [Digital Zoom]: Image size Zoom bar 14M Optical zoom range Other Image zoomed and cropped.*1 [On] selected for [Digital Zoom]: Image size Zoom bar 14M Digital zoom range Other Image zoomed and cropped.*1 Digital zoom range *1 If an image size is less than the full resolution after reaching the maximum optical zoom, the camera will automatically resize and crop the image to the selected image size and enter the digital zoom range if [Digital Zoom] is [On]. Photographs taken with the zoom bar displayed in red may appear “grainy.”
Page: 22
22 EN Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press F (INFO). The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 10) 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 4 4 NORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P 14M 14M 0:34 0:34 VGA 0:34 0:34 VGA Normal Detailed No information Viewing images 1 Press the q button. Number of frames/Total number of images 12:30 ’11/02/26 ’11/02/26 12:30 4/30 4/30 Playback image ● 2 Use HI to select an image. Displays previous image Displays next image Hold I to fast forward and hold H to reverse. The display size of the images can be changed. “Index view and close-up view” (p. 24) To play sound recordings To play sound recordings To play sound recorded with an image, select the image and press the Q button. A ! icon appears on images with which sound has been recorded. [R] (still images) (p. 39) During audio playback Press FG to adjust volume. To play back movies To play back movies Select a movie, and press the Q button. 12:30 ’11/02/26 ’11/02/26 12:30 4/30 4/30 OK Movie Play Movie Play Movie
Page: 23
23 EN Operations during movie playback Operations during movie playback During playback Pausing and resuming playback Press the Q button to pause playback. To resume playback during pause, fast forward, or rewind, press the Q button. Fast forward Press I to fast forward. Press I again to increase the fast forward speed. Rewind Press H to rewind. The rewinding speed increases each time H is pressed. Adjusting the volume Use FG to adjust the volume. Operations during pausing playback Operations during pausing playback During pause 00:14/00:34 00:14/00:34 Elapsed time/ Total recording time Cueing Press F to display the first frame and press G to display the last frame. Advancing and rewinding one frame at a time Press I or H to advance or rewind one frame at a time. Hold I or H pressed for continuous advance or rewind. Resuming playback Press the Q button to resume playback. To stop movie playback To stop movie playback Press the m button. Erasing images during playback (Single image erase) 1 Display the image you want to erase and press G (D). OK Erase Cancel Cancel Erase Set MENU Cancel 2 Press FG to select [Erase], and press the Q button. For erasing multiple images at the same time, see “Erasing images [Erase]” (p. 39).
Page: 24
24 EN Index view and close-up view Index view enables quick selection of a desired image. Close-up view (up to 10× magnification) allows checking of image details. 1 Turn the zoom lever. 12:30 ’11/02/26 ’11/02/26 12:30 4/30 4/30 ’11/02/26 12:30 ’11/02/26 ’11/02/26 12:30 4/30 4/30 2 4 4 ’11/02/26 4 2 W T W T W T 2 2 4 Index view Single-image view Close-up view To select an image in index view To select an image in index view Use FGHI to select an image, and press the Q button to display the selected image in single-image view. To scroll an image in close-up view To scroll an image in close-up view Use FGHI to move the viewing area. Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press F (INFO). The displayed image information changes in the order shown below each time the button is pressed. 10 10 ’11/02/26 ’11/02/26 12:30 12:30 4/30 4/30 10 10 4/30 4/30 1/1000 F3.0 2.0 AUTO WB 100 ISO P NORM 14M FILE 100 0004 ’11/02/26 12:30 Normal Detailed No information ●
Page: 25
25 EN Playing back 3D images (VR-330/D-730) 3D images shot with this camera can be played back on 3D-compatible devices connected to this camera using an HDMI cable (sold separately). “Shooting 3D images (D mode)” (p. 29) When playing back 3D images, read the warnings in the instruction manual for the 3D-compatible devices carefully. 1 Connect the 3D-compatible device and camera using the HDMI cable. For the connection and setting method, see “Using an HDMI cable” (p. 44). 2 Use FG to select [3D Show] and then press the Q button. 3 Use HI to select the 3D image to play back and then press the Q button. MENU OK Set Slideshow To start a slideshow, press the m button. To stop the slideshow, press the m or Q button. 3D images are composed of JPEG files and MPO files. If any files are deleted on a computer, playback of 3D images may not be possible. Using the menu guide Pressing the E button in the setup menu displays a description of the current item. “Using the Menu” (p. 4)
Page: 26
26 EN Using Shooting Modes Using Shooting Modes To change the shooting mode To change the shooting mode The shooting mode (P, M, s, P, ~, D*1 ) can be changed by using the function menu. “Using the Menu” (p. 4) *1 VR-330/D-730 only The default settings of the function are highlighted in . Shooting with automatic settings (M mode) According to the scene, the camera automatically selects the optimal shooting mode from [Portrait]/[Landscape]/ [Night+Portrait]/[Sport]/[Macro]. This is a fully automatic mode that allows the user to take pictures using the best mode for the shooting scene simply by pressing the shutter button. 1 Set the shooting mode to M. 4 4 # # 14M 0:34 0:34 VGA The icon changes depending on the scene that the camera automatically selects. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, [Program Auto] will be selected. There are some limitations on settings in M mode. Using the best mode for the shooting scene (s mode) 1 Set the shooting mode to s. 4 4 Scene Mode Scene Mode 14M NORM 2 Press G to go to the submenu. 4 4 Portrait Portrait 14M NORM 3 Use HI to select the best shooting mode for the scene, and press the Q button. 4 4 # # 14M 0:34 0:34 VGA Icon indicating current s mode
Page: 27
27 EN In s mode, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, some settings cannot be changed in some modes. Option Application BPortrait/FLandscape/ GNight Scene*1 /MNight+Portrait/ CSport/NIndoor/WCandle*1 / RSelf Portrait/SSunset*1 / XFireworks*1 /VCuisine/ dDocuments/KBeach & Snow/ Pet The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. To take pictures of a moving subject like a To take pictures of a moving subject like a pet ([ pet ([  Pet]) Pet]) 1 Use HI to select [ Pet], and press the Q button to set. 2 Hold the camera to align the AF target mark on the subject and press the Q button. When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. “To focus on a moving subject continuously (AF Tracking)” (p. 36). ● Shooting with special effects (P mode) Add an artistic effect to your photo by selecting the desired magic filter. 1 Set the shooting mode to P. 4 4 Magic Filter Magic Filter 0.0 0.0 AUTO WB AUTO WB 14M NORM 2 Press G to go to the submenu. Pop Art 0.0 0.0 AUTO WB AUTO WB 14M 4 4 NORM 3 Use HI to select the desired effect and then press the Q button to set. 4 4 0.0 0.0 AUTO WB AUTO WB # # 14M 0:34 0:34 VGA Icon indicating current P mode
Page: 28
28 EN Shooting mode Option Magic Filter [Pop Art \Pin Hole ]Fish Eye @Drawing*1 ;Soft Focus :Punk jSparkle *1 Two images are saved, an unmodified image and an image to which the effect has been applied. In P mode, the optimum shooting settings are pre-programmed for each effect. For this reason, some settings cannot be changed in some modes. Creating panoramic images (~ mode) Take pictures that can be joined to form a panorama using the supplied software. The focus, exposure, zoom position (p. 21), and white balance (p. 32) are locked at the first frame. The flash (p. 30) is fixed to $ (Flash Off) mode. 1 Set the shooting mode to ~. 4 4 0.0 0.0 AUTO WB AUTO WB Panorama Panorama 14M NORM 2 Use FGHI to select the pan direction. 3 Press the shutter button to take the first frame, and then compose the second shot. 1 2 1 2 MENU Exit OK Set Before first shot After first shot After the first shot, the area shown in the white frame reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image on the monitor. 4 Repeat Step 3 until the number of desired frames is taken, and then press the m button when finished. Panorama shooting is possible for up to 10 frames. For information on creating panoramas, see the online help for the supplied software. ●
Page: 29
29 EN Shooting 3D images (D mode) (VR-330/D-730) In this mode, 3D images are shot for viewing on 3D-compatible display devices. The camera monitor does not display images in 3D. 1 Set the shooting mode to D. 14M 4 4 3D Photo 3D Photo P P 0.0 0.0 NORM 2 Press the shutter button to take the first shot. 3 Overlap the subject with the image that is faintly displayed in the monitor, and choose the position for the second frame. 4 Press the shutter button to take the second shot. Depending on the subject or the situation (if the distance between the camera and subject is too short), the image may not look 3D. The 3D viewing angle varies depending on the subject, etc. To exit 3D shooting mode without saving an image, press the m button.
Page: 30
30 EN “Using the Menu” (p. 4) The default settings of the function are highlighted in . Using the flash The flash functions can be selected to best match the shooting conditions. 1 Select the flash option in the function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Flash Auto Flash Auto 14M NORM 2 Use HI to select the setting option, and press the Q button to set. Option Description Flash Auto The flash fires automatically in low- light or backlight conditions. Redeye Pre-flashes are emitted to reduce the occurrence of red eye in your photos. Fill In The flash fires regardless of the available light. Flash Off The flash does not fire. Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Select the macro option in the function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Off Off 14M NORM 2 Use HI to select the setting option, and press the Q button to set. Option Description Off Macro mode is deactivated. Macro This enables shooting as close as 20 cm/7.9 in.*1 (90 cm/35.4 in.*2 ) to the subject. Super Macro*3 This enables shooting as close as 1 cm/0.4 in. to the subject. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 30) and zoom (p. 21) cannot be set during super macro shooting. Using Shooting Functions Using Shooting Functions
Page: 31
31 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Select the self-timer option in the function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 12 12 2 2 Y Off Y Off 14M NORM 2 Use HI to select the setting option, and press the Q button to set. Option Description Y Off The self-timer is deactivated. Y 12 sec The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Y 2 sec The self-timer lamp blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts To cancel the self-timer after it starts Press the m button. Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (M and s excluded) can be adjusted brighter or darker to obtain a desired shot. 1 Select the exposure compensation option in the function menu. 0.0 Exposure Comp. 0.3 0.3 0.0 0.0 0.3 0.3 AUTO WB AUTO WB AUTO ISO AUTO ISO P P # # 14M 4 4 NORM 2 Use HI to select the desired brightness, and press the Q button.
Page: 32
32 EN Adjusting to a natural color scheme (White balance) For more natural coloring, choose a white balance option suited to the scene. 1 Select the white balance option in the function menu. WB Auto WB 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P 14M 4 4 NORM 2 Use HI to select the setting option, and press the Q button to set. Option Description WB Auto The camera automatically adjusts the white balance according to the shooting scene. 5 Sunny For shooting outdoors under a clear sky. 3 Cloudy For shooting outdoors under a cloudy sky. 1 Incandescent For shooting under tungsten lighting. > Fluorescent For shooting under white fluorescent lighting (offices, etc.). Selecting the ISO sensitivity 1 Select the ISO setting option in the function menu. P P 0.0 0.0 AUTO WB AUTO WB 400 ISO ISO 200 ISO ISO 100 ISO ISO ISO 200 1/400 1/400 F3.0 F3.0 400 200 100 ISO 200 2 Use HI to select the setting option, and press the Q button to set. Option Description ISO Auto The camera automatically adjusts the sensitivity according to the shooting scene. High ISO Auto The camera uses a higher sensitivity compared to [ISO Auto] to minimize blur caused by a moving subject or by camera shake. Value The ISO sensitivity is fixed to the selected value. “ISO” is short for “International Organization for Standardization.” ISO standards specify the sensitivity for digital cameras and film, thus codes such as “ISO 100” are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance.
Page: 33
33 EN Sequential shooting (Drive) Pictures are taken sequentially while the shutter button is held down. 1 Select the drive option in the function menu. 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P Sequential Sequential MENU MENU Option Description o Single One frame is shot each time the shutter button is pressed. j*1 Sequential Take sequential shots using the focus, brightness (exposure) and white balance set in the first frame. c High- Speed1 The camera takes sequential shots at a faster speed than in [j]. d High- Speed2 The camera takes sequential shots at a faster speed than in [c]. *1 The shooting speed varies depending on the settings for [Image Size/Compression] (p. 34). When set to [j], the flash (p. 30) cannot be set to [Redeye]. In addition, when set to [c] or [d], the flash is fixed to [Flash Off]. When set to [c] or [d], [Image Size] is limited to [3] or lower, and the ISO sensitivity is fixed to [ISO Auto].
Page: 34
34 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Shooting Functions Menus for Shooting Functions The default settings of the function are highlighted in . Restoring the shooting functions to the default settings [Reset] Restoring the shooting functions to the default settings [Reset] p (Shooting menu 1) X Reset Submenu 2 Application Yes Restores the following menu functions to the default settings. Shooting mode (p. 26) Flash (p. 30) Macro (p. 30) Self-timer (p. 31) • • • • Exposure compensation (p. 31) White balance (p. 32) ISO (p. 32) Drive (p. 33) • • • • Menu functions in z (Shooting menu)/A (Movie menu) (p. 34 to 37) • No The current settings will not be changed. Selecting the image quality for still images [Image Size/Compression] Selecting the image quality for still images [Image Size/Compression] p (Shooting menu 1) X Image Size/Compression Submenu 1 Submenu 2 Application Image Size 14M (4288×3216) Suitable for printing pictures at A3 (11×17 in.). 8M (3264×2448) Suitable for printing pictures up to A3 (11×17 in.). 5M (2560×1920) Suitable for printing pictures at A4 (8.5×11 in.). 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing pictures at A5 (5×7 in.). 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures on emails and web sites. 16:9L (4288×2416)*1 Suitable for playing pictures on a widescreen TV and for printing on A3 or 11"×17". 16:9S (1920×1080) Suitable for playing pictures on a widescreen TV and for printing on A5 or 5"×7". Compression Fine Shooting at high quality. Normal Shooting at normal quality. *1 VR-330/D-730 only
Page: 35
35 EN For information on using the menus, see “Using the Menu” (p. 4). “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 63) Selecting the image quality for movies Selecting the image quality for movies [Image Size/Frame Rate] [Image Size/Frame Rate] A (Movie menu) X Image Size/Frame Rate Submenu 1 Submenu 2 Application Image Size 720P (1280×720)/ VGA (640×480)/ QVGA (320×240) Select the image quality based on the image size and frame rate. Higher frame rates provide smoother movie images. Frame Rate N 30fps*1 / O 15fps*1 *1 frames per second “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 63) Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode] p (Shooting menu 1) X AF Mode Submenu 2 Application Face/iESP The camera focuses automatically. (If a face is detected, it is shown by a white frame*1 ; when the shutter button is pressed halfway and the camera is able to focus, the frame color is changed to green*2 if the camera is able to focus. If no face is detected, the camera chooses a subject in the frame and focuses automatically.) Spot The camera focuses on the subject located within the AF target mark. AF Tracking The camera tracks the subject movement automatically to focus on it continuously. *1 For some subjects, the frame may not appear or may take some time to appear. *2 If the frame blinks in red, the camera is unable to focus. Try again to press the shutter button halfway.
Page: 36
36 EN For information on using the menus, see “Using the Menu” (p. 4). To focus on a moving subject To focus on a moving subject continuously (AF Tracking) continuously (AF Tracking) 1 Hold the camera to align the AF target mark on the subject and press the Q button. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. 3 To cancel the tracking, press the Q button. Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or fail to track the subject movement. When the camera fails to track the subject movement, the AF target mark changes to red. Shooting at higher magnifications than Shooting at higher magnifications than optical zoom [Digital Zoom] optical zoom [Digital Zoom] p (Shooting menu 1) X Digital Zoom Submenu 2 Application Off Disable digital zoom. On Enable digital zoom. [Digital Zoom] is not available when [% Super Macro] (p. 30) is selected. The option selected for [Digital Zoom] affects the appearance of the zoom bar. “To take larger images [Digital Zoom]” (p. 21) Reducing the blur caused by the Reducing the blur caused by the camera shake when shooting camera shake when shooting [Image Stabilizer] (still images)/ [Image Stabilizer] (still images)/ [IS Movie Mode] (movies) [IS Movie Mode] (movies) p (Shooting menu 1) X Image Stabilizer (still images)/ A (Movie menu) X IS Movie Mode (movies) Submenu 2 Application Off The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. On The image stabilizer is activated. The camera’s default settings are [Image Stabilizer] (still images) to [On] and [IS Movie Mode] (movies) to [Off]. There may be a noise coming from inside the camera when the shutter button is pressed with [Image Stabilizer] (still images) set to [On]. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking pictures at night, [Image Stabilizer] (still images) may not be as effective. When shooting while the [IS Movie Mode] (movies) is set to [On], the image will be enlarged somewhat before saving.
Page: 37
37 EN For information on using the menus, see “Using the Menu” (p. 4). Recording sound when shooting Recording sound when shooting movies [ movies [R R] ] A (Movie menu) X R Submenu 2 Application Off No sound is recorded. On Sound is recorded. When set to [On], only the digital zoom can be used during movie recording. To record the movie with the optical zoom, set [R] (movies) to [Off]. Using the AF illuminator to focus on a Using the AF illuminator to focus on a shadowed subject [AF Illuminat.] shadowed subject [AF Illuminat.] p (Shooting menu 1) X AF Illuminat. Submenu 2 Application Off The AF illuminator is not used. On When the shutter button is pressed halfway down, the AF illuminator turns on to aid focusing. AF illuminator Displaying icon guides [Icon Guide] Displaying icon guides [Icon Guide] q (Shooting menu 2) X Icon Guide Submenu 2 Application Off No icon guide is displayed. On The explanation of the selected icon will be displayed when a shooting mode or function menu icon is selected (position the cursor on the icon for a while to display the explanation). Icon guide 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO Functions can be changed manually. Program Auto Program Auto 14M NORM Imprinting the date of recording Imprinting the date of recording [Date Stamp] [Date Stamp] q (Shooting menu 2) X Date Stamp Submenu 2 Application Off Do not imprint the date. On Stamp new photographs with the date of recording. [Date Stamp] is not available if the clock has not been set. “Date, time, time zone, and language” (p. 17) The date stamp can not be deleted. [Date Stamp] is not available in ~ mode or during sequential shooting.
Page: 38
38 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Playback, Editing, and Printing Functions Menus for Playback, Editing, and Printing Functions Playing back pictures automatically Playing back pictures automatically [Slideshow] [Slideshow] q (Playback menu) X Slideshow To start a slideshow To start a slideshow VR-330/D-730 Submenu 2 Submenu 3 Application BGM Off/On Selects the background music options. Type Normal/Fader/ Zoom Selects the type of transition effect used between slides. Start ― Starts the slideshow. 1 Select the desired [BGM] and [Type]. 2 Select [Start] and press the Q button. VR-320/D-725, VR-310/D-720 Select [Slideshow] in the playback menu and press the Q button. Single-frame advance/rewind Single-frame advance/rewind During a slideshow, press I to skip ahead one frame or press H to go back one frame. To stop the slideshow To stop the slideshow Press the Q button or the m button. Changing the image size [ Changing the image size [Q Q] ] q (Playback menu) X Edit X Q Submenu 2 Application 8 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications. 9 320 × 240 1 Use HI to select an image. 2 Use FG to select the size, and press the Q button. Cropping images [ Cropping images [P P] ] q (Playback menu) X Edit X P 1 Use HI to select an image, and press the Q button. 2 Use the zoom lever to select the size of the cropping frame, and use FGHI to move the frame. OK Set 3 Press the Q button. The edited image will be saved as a separate image. ●
Page: 39
39 EN For information on using the menus, see “Using the Menu” (p. 4). Adding sound to still images [ Adding sound to still images [R R] ] q (Playback menu) X Edit X R 1 Use HI to select an image. 2 Aim the microphone toward the sound source. Microphone 3 Press the Q button. Recording starts. The camera adds (records) sound for approx. 4 seconds while playing back the image. Retouching images [Perfect Fix] Retouching images [Perfect Fix] q (Playback menu) X Edit X Perfect Fix Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1 Application All [Lighting Fix] and [Redeye Fix] are applied together. Lighting Fix Only sections darkened by backlighting and dim lighting are brightened. Redeye Fix Eyes that are reddened by the flash are corrected. 1 Use FG to select a correction method, and press the Q button. ● ● 2 Use HI to select an image for retouching, and press the Q button. The retouched image is saved as a separate image. Erasing images [Erase] Erasing images [Erase] q (Playback menu) X Erase Submenu 1 Application All Erase All images in the internal memory or card will be erased. Sel. Image Images are individually selected and erased. Erase Deletes the image displayed. When erasing pictures in a internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. To erase all images [All Erase] To erase all images [All Erase] 1 Use FG to select [All Erase], and press the Q button. 2 Use FG to select [Yes], and press the Q button. To individually select and erase images To individually select and erase images [Sel. Image] [Sel. Image] 1 Use FG to select [Sel. Image], and press the Q button. 2 Use HI to select the image to be erased, and press the Q button to add a R mark to the image. Turn the zoom lever to the W side to display an index view. Images can be quickly selected using the FGHI buttons. Turn to the T side to return to the single frame display. ● ●
Page: 40
40 EN For information on using the menus, see “Using the Menu” (p. 4). MENU OK Sel. Image Erase/Cancel R mark 3 Repeat Step 2 to select the images to be erased, and then press the m button to erase the selected images. 4 Use FG to select [Yes], and press the Q button. The images with a R mark are erased. Saving print settings to the image data Saving print settings to the image data [Print Order] [Print Order] q (Playback menu) X Print Order “Print Reservations (DPOF)” (p. 52) Print reservation can be set only for still images that are recorded to the card. ● Protecting images [ Protecting images [? ?] ] q (Playback menu) X ? Protected images cannot be erased by [Erase] (p. 23, 39), [Sel. Image], or [All Erase] (p. 39), but all images are erased by [Memory Format]/[Format] (p. 41). 1 Use HI to select an image. 2 Press the Q button. Press the Q button again to cancel the settings. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the m button. Rotating images [ Rotating images [y y] ] q (Playback menu) X y 1 Use HI to select an image. 2 Press the Q button to rotate the image. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the m button. The new picture orientations will be saved even after the power is turned off. ●
Page: 41
41 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Other Camera Settings Menus for Other Camera Settings Erasing data completely Erasing data completely [Memory Format]/[Format] [Memory Format]/[Format] r (Settings 1) X Memory Format/Format Before formatting, check that no important data is left in the internal memory or card. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Submenu 2 Application Yes Completely erases the image data in the internal memory*1 or card (including protected images). No Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory Copying images in the internal memory to the card [Backup] to the card [Backup] r (Settings 1) X Backup Submenu 2 Application Yes Backs up image data in the internal memory to the card. No Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. Selecting a method for connecting the Selecting a method for connecting the camera to other devices camera to other devices [USB Connection] [USB Connection] r (Settings 1) X USB Connection Submenu 2 Application Auto When the camera is connected to another device, the settings selection screen is displayed. Storage Select when transferring images to a computer or when using the supplied software with the camera connected to a computer. MTP Select when transferring images to a computer running Windows Vista or Windows 7 without using the supplied software. Print Select when connecting to a PictBridge-compatible printer. Copying pictures to a computer without Copying pictures to a computer without using the supplied software using the supplied software This camera is compatible with the USB Mass Storage Class. You can transfer and save the image data on your computer while the camera and the computer are connected. System requirements System requirements Windows Windows XP (Service Pack 1 or later)/ Windows Vista/Windows 7 Macintosh Mac OS X v10.3 or later
Page: 42
42 EN For information on using the menus, see “Using the Menu” (p. 4). Even if a computer has USB ports, proper operation is not guaranteed in the following cases. computers with USB ports installed using an expansion card, etc. computers without a factory-installed OS and home-built computers Turning on the camera with the Turning on the camera with the q q button [ button [q q Power On] Power On] r (Settings 1) X q Power On Submenu 2 Application No The camera is not turned on. To turn on the camera, press the n button. Yes Press and hold the q button to turn the camera on in playback mode. Saving the mode when the camera is Saving the mode when the camera is turned off [Keep turned off [Keep K K Settings] Settings] r (Settings 1) X Keep K Settings Submenu 2 Application Yes The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. No The shooting mode is set to P mode when the camera is turned on. ● ● Choosing the opening screen display Choosing the opening screen display [Pw On Setup] [Pw On Setup] r (Settings 1) X Pw On Setup Submenu 2 Application Off No opening screen is displayed. On The opening screen is displayed when the camera is turned on. Selecting the camera sound and its Selecting the camera sound and its volume [Sound Settings] volume [Sound Settings] r (Settings 1) X Sound Settings Submenu 2 Submenu 3 Application Sound Type 1/2/3 Choose the sound made by camera controls. q Volume OFF (No Sound) or 5 levels of volume Adjusts the image playback volume. Volume OFF (No Sound) or 5 levels of volume Choose the volume of the sound made by camera controls. Adjusting the CCD and the image Adjusting the CCD and the image processing function [Pixel Mapping] processing function [Pixel Mapping] s (Settings 2) X Pixel Mapping This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.
Page: 43
43 EN For information on using the menus, see “Using the Menu” (p. 4). For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image To adjust the CCD and the image processing function processing function Press the Q button when [Start] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. ● Adjusting the brightness of the monitor Adjusting the brightness of the monitor [ [s s] ] s (Settings 2) X s Submenu 2 Application Bright/Normal Selects the monitor brightness depending on the surrounding brightness. Viewing images on a TV [TV Out] (VR-330/D-730) Viewing images on a TV [TV Out] (VR-330/D-730) s (Settings 2) X TV Out Different countries and regions use different video signal standards. Before connecting the camera, choose a video signal standard that matches that used by the TV. Submenu 2 Submenu 3 Application Video Out NTSC Choose when connecting the camera to TVs in countries or regions where NTSC is used (e.g., North America, Taiwan, Korea, and Japan). PAL Choose when connecting the camera to TVs in countries or regions where PAL is used (e.g., Europe and China). HDMI Out 480p/576p / 720p / 1080i Choose an HDMI output format. HDMI Control Off Playback operations are performed using camera controls. On Playback operations are performed using the TV remote control. Camera factory defaults vary with the country or region of sale. Viewing images on a TV Viewing images on a TV Using an AV cable 1 Match the camera video signal format ([NTSC]/[PAL]) to that used by the TV. 2 Connect the camera to the TV.
Page: 44
44 EN For information on using the menus, see “Using the Menu” (p. 4). Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Multi-connector Using an HDMI cable 1 Match the camera digital signal format ([480p/576p]/[720p]/[1080i]) to that used by the TV. 2 Connect the camera to the TV. The [1080i] option gives priority to the 1080i HDMI output. If the TV is not set up for 1080i input, the camera changes the format first to 720p and if this is not supported then to 480p and finally to 576p. For information on changing TV HDMI input settings, see to the instruction manual provided with the TV. Do not connect the HDMI cable when the camera is connected to a computer or other device using the USB cable. Connect to the HDMI connector on the TV. HDMI mini connector Type C HDMI cable (commercially available) Connector cover
Page: 45
45 EN For information on using the menus, see “Using the Menu” (p. 4). Type D Type C 3 Turn the TV on and select the HDMI input to which the camera is connected. See the instruction manual provided with your TV for more information. 4 Turn the camera on and use HI to view images. Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Images and other information may be cropped for display on the TV. Using a remote control Using a remote control 1 Select [On] for [HDMI Control] and turn the camera off. 2 Connect the camera to the TV using an HDMI cable. “Using an HDMI cable” (p. 44) 3 First turn on the TV, and then turn on the camera. Follow the on-screen guide displayed by the TV to operate the camera. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and use the controls on the camera. ●
Page: 46
46 EN For information on using the menus, see “Using the Menu” (p. 4). Selecting a video signal system to match your TV [Video Out] Selecting a video signal system to match your TV [Video Out] (VR-320/D-725, VR-310/D-720) (VR-320/D-725, VR-310/D-720) s (Settings 2) X Video Out The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Multi-connector 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Press the q button, and use HI to select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped.
Page: 47
47 EN For information on using the menus, see “Using the Menu” (p. 4). Saving battery power between shots Saving battery power between shots [Power Save] [Power Save] s (Settings 2) X Power Save Submenu 2 Application Off Cancels [Power Save]. On When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode To resume standby mode Press any button. Changing the display language [ Changing the display language [W W] ] s (Settings 2) X W Submenu 2 Application Languages The language for the menus and error messages displayed on the monitor is selected. 1 Use FGHI to select your language and press the Q button. Setting the date and time [ Setting the date and time [X X] ] s (Settings 2) X X To select the date display order To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. 02 26 12 30 : . . 2011 OK Set X Y M D Time MENU Cancel Y/M/D Y/M/D Date order 2 Press the Q button to complete the operation. “Date, time, time zone, and language” (p. 17) Switching between home and travel Switching between home and travel destination time zones [World Time] destination time zones [World Time] s (Settings 2) X World Time You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X]. Submenu 2 Submenu 3 Application Home/ Alternate x The time in the home time zone (the time zone selected for x in submenu 2). z The time in the travel destination time zone (the time selected for z in submenu 2). x*1 — Select the home time zone (x). z*1, 2 — Select the travel destination time zone (z). *1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on. *2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z).
Page: 48
48 EN Printing Printing Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [Easy Print] In the setup menu, set [USB Connection] (p. 41) to [Print]. 1 Display the image to be printed on the monitor. “Viewing images” (p. 22) 2 Turn on the printer, and then connect the printer and camera. Multi-connector OK Custom Print Easy Print Start USB cable (supplied) Y button 3 Press I to start printing. 4 To print another image, use HI to select an image, and press the Q button.
Page: 49
49 EN To exit printing To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. OK Print Exit Changing the printer’s settings for printing [Custom Print] 1 Follow Steps 1 and 2 for [Easy Print] (p. 48), and press the Q button. 2 Use FG to select the print mode, and press the Q button. Print Mode Select Multi Print Print Order All Index MENU OK Set Exit All Print Print Print Submenu 2 Application Print This prints the image selected in Step 5. All Print This prints all images stored in the internal memory or card. Multi Print This prints one image in a multiple layout format. All Index This prints an index of all images stored in the internal memory or card. Print Order*1 This prints images based on the print reservation data on the card. *1 [Print Order] is available only when print reservations have been made. “Print Reservations (DPOF)” (p. 52) 3 Use FG to select [Size] (Submenu 3), and press I. If the [Printpaper] screen is not displayed, the [Size], [Borderless], and [Pics/Sheet] are set to the printer’s standard. Printpaper Size Borderless Standard OK Set MENU Back Standard Standard
Page: 50
50 EN 4 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the Q button. Submenu 4 Application Off/On*1 The image is printed with a border around it ([Off]). The image is printed to fill the entire paper ([On]). (The number of images per sheet varies depending on the printer.) The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 2. *1 The available settings for [Borderless] vary depending on the printer. If [Standard] is selected in Steps 3 and 4, the image is printed at the printer’s standard settings. NORM OK Single Print Print 4/30 4/30 More 12:30 ’11/02/26 ’11/02/26 12:30 NORM 14M FILE 100 0004 100 0004 5 Use HI to select an image. 6 Press F to make a print reservation for the current image. Press G to make the detailed printer settings for the current image. To make the detailed printer settings To make the detailed printer settings 1 Use FGHI to select the setting, and press the Q button. Print Info File Name P Date Without Without MENU OK Set Exit <x <x 1 1 Submenu 5 Submenu 6 Application <× 0 to 10 This selects the number of prints. Date With/Without Selecting [With] prints the images with the date. Selecting [Without] prints the images without the date. File Name With/Without Selecting [With] prints the file name on the image. Selecting [Without] does not print any file name on the image. P (Proceeds to the setting screen.) This selects a portion of the image for printing.

Question & answers

Have a question about the Olympus VR-320 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus VR-320. Please make sure that you describe your difficulty with the Olympus VR-320 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus VR-320

Name
Email
Reaction

View a manual of the Olympus VR-320 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: VR-320
  • Filetype: PDF
  • Available languages: English, Spanish, Dutch, German, French, Italian, Swedish, Portuguese, Danish, Polish, Russian, Norwegian, Finnish, Romanian, Turkish, Slovak, Greek, Hungarian, Slovene, Croatian, Ukrainian, Bulgarian