Olympus Stylus Tough 8010 manual

User manual for the Olympus Stylus Tough 8010 in English. This PDF manual has 83 pages.

Page: 1
Instruction Manual STYLUS TOUGH-8010 /μTOUGH-8010 STYLUS TOUGH-6020 /μTOUGH-6020 STYLUS TOUGH-3000 /μTOUGH-3000 DIGITAL CAMERA ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● The application software and instruction manual PDF file are stored on the internal memory of the camera. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for STYLUS TOUGH-8010/μ TOUGH-8010.
Page: 2
2 EN Contents Contents Step 5 Printing “Direct printing (PictBridge)” (p. 53) “Print Reservations (DPOF)” (p. 56) Step 4 How to Use the Camera “Camera Settings” (p. 3) Step 3 Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p. 16) Step 2 Preparing the Camera “Preparing the Camera” (p. 11) Names of Parts .............................. 7 Preparing the Camera ................. 11 Shooting, Playback, and Erasing ......................................... 16 Using Shooting Modes................ 23 Using Shooting Functions.......... 28 Menus for Shooting Functions... 33 ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions....................... 38 Menus for Other Camera Settings ........................................ 44 Printing......................................... 53 Usage Tips ................................... 58 Appendix ...................................... 63 ¾ ¾ ¾ ¾ ¾ Step 1 Checking the contents of the box Other accessories not shown: Warranty card Contents may vary depending on purchase location. Digital camera USB cable (CB-USB6) AV cable (CB-AVC3) Strap USB-AC adapter (F-2AC) or Lithium Ion Battery *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 *2 STYLUS TOUGH-3000/μ TOUGH-3000 or LI-50B*1 LI-42B*2
Page: 3
3 EN Camera Settings Using the Direct Buttons Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. Operation guide The symbols FGHI displayed for image selections and settings indicate that the arrow pad is to be used. NORM OK SINGLE PRINT PRINT 4/30 4/30 MORE ’10/02/26 12:30 ’10/02/26 12:30 NORM 14M FILE 100 0004 100 0004 02 26 12 30 : . . 2010 MENU OK SET CANCEL X Y M D TIME Y/M/D Y/M/D Arrow pad H (left) G (down) / D button (erase) (p. 20) F (up) / INFO button (changing information display) (p. 18, 21) I (right) A button Operation guides displayed at the bottom of the screen indicate that the m button, A button, or zoom buttons can be used. MENU OK SEL. IMAGE ERASE/CANCEL Operation guide OK SET SHADOW ADJUST AUTO AF MODE FACE/iESP ESP/ ESP FINE ZOOM OFF DIGITAL ZOOM OFF COMPRESSION NORMAL MENU OK SET EXIT 1 2 3 1 2 IMAGE SIZE IMAGE SIZE 14M 14M Shutter button (p. 16, 58) Zoom buttons (p. 17, 20) Movie record button (p. 17) q button (switching between shooting and playback) (p. 17, 18, 45) m button (p. 4) E button (camera guide/ menu guide) (p. 22)
Page: 4
4 EN Using the Menu Using the Menu Use the menu to change camera settings such as the shooting mode. Press the m button to display the function menu. The function menu can be used to set frequently used shooting and playback functions such as shooting mode. PHOTO SURFING EVENT BEAUTY FIX EDIT ERASE SETUP SLIDESHOW SLIDESHOW Use FG to select a menu and press the A button. 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO PROGRAM AUTO PROGRAM AUTO Shooting Playback Selected option To select the shooting mode Use HI to select the shooting mode and press the A button. To select the function menu Use FG to select a menu and use HI to select a menu option. Press the A button to set the function menu. o [SETUP] menu Shooting mode In the [SETUP] menu, various camera functions can be set, including shooting and playback functions not displayed in the function menu, and other settings such as date, time and screen display. Function menu 1 Select [SETUP] and then press the A button. The [SETUP] menu is displayed. SHADOW ADJUST AUTO AF MODE FACE/iESP ESP/ ESP FINE ZOOM OFF DIGITAL ZOOM OFF COMPRESSION NORMAL MENU OK SET EXIT 1 2 3 1 2 IMAGE SIZE IMAGE SIZE 14M 14M 2 Press H to select the page tabs. Use FG to select the desired page tab and press I. x --.--.-- --:-- X MENU OK SET EXIT WORLD TIME TV OUT OFF POWER SAVE 1 2 3 1 2 Page tab MENU OK SET EXIT TV OUT 1 2 3 1 2 OFF POWER SAVE x --.--.-- --:-- --.--.-- --:-- X X --.--.-- --:-- --.--.-- --:-- X X WORLD TIME Submenu 1 3 Use FG to select the desired submenu 1 and then press the A button. MENU OK SET EXIT 1 2 3 1 2 --.--.-- --:-- X WORLD TIME TV OUT x OFF POWER SAVE POWER SAVE OFF MENU OK SET EXIT 1 2 3 1 2 HOME --.--.-- --:-- X WORLD TIME VIDEO OUT TV OUT OFF POWER SAVE POWER SAVE OFF POWER SAVE ON OFF OFF Submenu 2 ● 4 Use FG to select the desired submenu 2 and then press the A button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 33 to 52) MENU OK SET EXIT 1 2 3 1 2 --.--.-- --:-- X WORLD TIME TV OUT x ON ON POWER SAVE POWER SAVE 5 Press the m button to complete the setting. Some functions cannot be used in some shooting modes. In such cases, the following message is displayed after setting. SHADOW ADJUST AUTO AF MODE iESP ESP/*1 ESP FINE ZOOM OFF DIGITAL ZOOM OFF COMPRESSION NORMAL MENU OK SET EXIT 1 2 3 1 2 CONFLICTING SETTINGS IMAGE SIZE IMAGE SIZE 14M 14M ●
Page: 5
5 EN Menu Index Menus for Shooting Functions 1 Shooting mode P (PROGRAM AUTO).......p.16 M (iAUTO)....................p.23 s (SCENE MODE) ......p.23 P (MAGIC FILTER).....p.24 p (PANORAMA)...............p.25 Q(BEAUTY)................p.27 2 Flash..................................p.28 3 Macro ................................p.28 4 Self-timer...........................p.30 5 Exposure compensation....p.30 6 White balance....................p.30 7 ISO ....................................p.31 8 Drive..................................p.32 9 o (SETUP) IMAGE SIZE (Still images) .......................................p.33 IMAGE SIZE (Movies).......p.33 COMPRESSION (Still images) .......................................p.33 IMAGE QUALITY (Movies) .......................................p.33 SHADOW ADJUST ...........p.34 AF MODE..........................p.34 ESP/n ............................p.34 FINE ZOOM ......................p.35 1 SLIDESHOW.....................p.38 2 PHOTO SURFING.............p.38 3 EVENT q ........................p.39 4 COLLECTION q .............p.39 5 BEAUTY FIX......................p.40 Menus for Playback, Editing, and Printing Functions 6 EDIT ..................................p.40 7 ERASE ..............................p.42 8 o (SETUP) PRINT ORDER..................p.42 0 (Protect) .....................p.42 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO PROGRAM AUTO PROGRAM AUTO PHOTO SURFING EVENT COLLECTION BEAUTY FIX EDIT ERASE SETUP SLIDESHOW SLIDESHOW 6 7 3 2 1 5 4 DIGITAL ZOOM.................p.35 R (Still images)..................p.35 R (Movies).........................p.36 IMAGE STABILIZER (Still images)/ IS MOVIE MODE (Movies).............................p.36 REC VIEW.........................p.36 PIC ORIENTATION*1 .........p.37 ICON GUIDE.....................p.37 REMOTE FLASH*2 ............p.37 8 9 8 3 2 1 4 MENU OK SET EXIT PRINT ORDER y 0 R 1 2 3 1 2 SHADOW ADJUST AUTO AF MODE FACE/iESP ESP/ ESP FINE ZOOM OFF DIGITAL ZOOM OFF COMPRESSION NORMAL MENU OK SET EXIT 1 2 3 1 2 IMAGE SIZE IMAGE SIZE 14M 14M REC VIEW ON PIC ORIENTATION ON IMAGE STABILIZER ON ICON GUIDE ON REMOTE FLASH ON R OFF MENU OK SET EXIT 1 2 3 1 2 IMAGE SIZE VGA IS MOVIE MODE OFF ON IMAGE QUALITY NORMAL MENU OK SET EXIT R 1 2 3 1 2 6 5 7 y (Rotate).........................p.43 R (Add sound to still images) .......................................p.43 *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only *2 STYLUS TOUGH-8010/μ TOUGH-8010 only
Page: 6
6 EN 1 r (Settings 1) INTERNAL/SD...................p.44 MEMORY FORMAT/ FORMAT............................p.44 DATA REPAIR ...................p.44 u COPY.....................p.44 l (Language) ................p.44 RESET...............................p.45 USB CONNECTION..........p.45 2 s (Settings 2) q POWER ON ................p.45 SAVE SETTINGS ..............p.45 PW ON SETUP .................p.45 Menus for Other Camera Settings SOUND SETTINGS ..........p.46 FILE NAME .......................p.46 PIXEL MAPPING...............p.47 s (Monitor) .....................p.47 3 t (Settings 3) X (Date/time)..................p.47 WORLD TIME....................p.48 TV OUT .............................p.48 POWER SAVE...................p.50 MANOMETER*1 ................. p.50 TAP CONTROL*2 ............... p.51 LED ILLUMINATOR*2 ......... p.52 COPY ENGLISH RESET USB CONNECTION PC MENU OK MEMORY FORMAT SET EXIT INTERNAL/SD DATA REPAIR AUTO 1 2 1 2 3 3 2 1 *1 STYLUS TOUGH-8010/μ TOUGH-8010 only *2 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only Operating the camera by tapping the Operating the camera by tapping the body body (p. 51) (p. 51) (STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only) You can operate the camera by tapping the body when [TAP CONTROL] is [ON].
Page: 7
7 EN Names of Parts 1 Battery/card/connector cover lock .................................................... p. 11 2 LOCK knob*1 ................................. p. 11 3 HDMI mini connector....................p. 49 4 Multi-connector...........p. 12, 13, 49, 53 5 Battery/card/connector cover ........................................ p. 11, 49, 71 Camera unit 11 1 1 1 2 3 4 5 6 10 7 8 9 STYLUS TOUGH-6020/ μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 6 Lens .............................................p. 63 7 Self-timer lamp/ LED illuminator*2 ...........p. 30/ p. 32, 52 8 Flash ............................................p. 28 9 Battery lock knob.......................... p. 11 10 Tripod socket 11 Microphone*3 ..........................p. 35, 43 *1 STYLUS TOUGH-8010/μ TOUGH-8010 only *2 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only *3 STYLUS TOUGH-3000/μ TOUGH-3000
Page: 8
8 EN 1 6 10 11 8 2 3 4 5 7 9 12 13 14 2 STYLUS TOUGH-6020/μ TOUGH-6020 1 n button........................p. 14, 16 2 Microphone*1 ..........................p. 35, 43 3 Monitor .........................p. 9, 16, 47, 58 4 Speaker 5 q button (switching between shooting and playback)...................p. 17, 18, 45 6 A button (OK) ...............................p. 3 7 Indicator lamp.........................p. 12, 13 8 Shutter button.........................p. 16, 58 9 Zoom buttons .........................p. 17, 20 10 Movie record button .....................p. 17 11 Strap eyelet....................................p. 8 12 Arrow pad.......................................p. 3 INFO button (changing information display).............................p. 18, 21 D button (erase) ....................p. 20 13 E button (camera guide/menu guide) .........p. 22 14 m button ..............................p. 3, 4 Attaching the camera strap Pull the strap tight so that it does not come loose. *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020
Page: 9
9 EN Monitor Shooting mode display F3.9 1/100 1/100 F3.9 P P 14M 4 4 NORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 00:34 00:34 1 3 2 4 5 6 7 8 9 10 11 15 16 17 18 14 13 12 19 27 28 20 22 21 24 23 25 26 960hPa 0m 1 Battery check .........................p. 13, 59 2 Tap control*1 ..............................p. 6, 51 3 Shooting mode.......................p. 16, 23 4 Flash ............................................p. 28 Flash standby/flash charge ..........p. 58 5 Macro/super macro/ S-macro LED mode*1 ....................p. 28 6 Self-timer......................................p. 30 7 Exposure compensation...............p. 30 8 White balance ..............................p. 30 9 ISO...............................................p. 31 10 Drive.............................................p. 32 11 [SETUP] menu .......................p. 4, 5, 6 12 World time ....................................p. 48 13 Image stabilization (still images)/ Digital image stabilization (movies) ....................................................p. 36 14 Metering .......................................p. 34 15 Shadow Adjustment Technology ....................................................p. 34 16 Compression (still images) ..................................p. 33, 66, 67, 68 17 Image size (still images) ..................................p. 33, 66, 67, 68 18 Number of storable still pictures (still images).................................p. 16 19 Current memory ...........................p. 65 20 Remaining recording time (movies) .......................................p. 17 21 Altitude/water depth*2 ...................p. 50 22 Atmospheric/ hydraulic pressure*2 ......................p. 50 23 Image size (movies)...p. 33, 66, 67, 68 24 Histogram.....................................p. 18 25 AF target mark .............................p. 16 26 Camera shake warning 27 Aperture value..............................p. 16 28 Shutter speed...............................p. 16 *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only *2 STYLUS TOUGH-8010/μ TOUGH-8010 only
Page: 10
10 EN Playback mode display Standard display 10 10 ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 00:12/00:34 00:12/00:34 00:12/00:34 1 6 5 4 3 2 17 1 6 Still image Movie Advanced display 10 10 4/30 4/30 1/1000 F3.9 2.0 AUTO WB AUTO ISO P NORM 14M FILE 100 0004 ’10/02/26 12:30 1/1000 F3.9 2.0 AUTO WB AUTO ISO P FILE 100 0004 ’10/02/26 12:30 NORM 14M 1 6 8 9 11 10 5 4 3 2 7 12 14 16 17 18 19 20 13 15 22 21 24 23 960hPa 0m ● ● 1 Battery check .........................p. 13, 59 2 Print reservation/ number of prints ..................p. 56/p. 55 3 Protect..........................................p. 42 4 Adding sound ...................p. 35, 36, 43 5 Current memory ...........................p. 65 6 Frame number/total number of images (still images).................................p. 18 Elapsed time/total recording time (movies) .......................................p. 19 7 Histogram.....................................p. 18 8 Shutter speed...............................p. 16 9 Aperture value..............................p. 16 10 ISO...............................................p. 31 11 Exposure compensation...............p. 30 12 White balance ..............................p. 30 13 Compression (still images) ..................................p. 33, 66, 67, 68 Image quality (movies) ..................................p. 33, 66, 67, 68 14 Image size..................p. 33, 66, 67, 68 15 Drive.............................................p. 32 16 File number 17 Date and time.........................p. 14, 47 18 Metering .......................................p. 34 19 Shadow Adjustment Technology ...................................................p. 34 20 Flash ............................................p. 28 21 Shooting mode.......................p. 16, 23 22 Macro ...........................................p. 28 23 Altitude/water depth* .....................p. 50 24 Atmospheric/ hydraulic pressure* .......................p. 50 * STYLUS TOUGH-8010/μ TOUGH-8010 only
Page: 11
11 EN Preparing the Camera 3 STYLUS TOUGH-8010/ μ TOUGH-8010 STYLUS TOUGH-6020/ μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 1 2 3 1 2 Insert the battery by putting in the ▼ marked side first, with the B marks toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. When removing the battery or card, be sure to turn off the camera before opening or closing the battery/card/connector cover. When using the camera, be sure to close the battery/card/connector cover. Battery charge and camera setup Connect the camera to the computer to charge the battery and setup the camera. System requirements Windows XP (SP2 or later)/ Windows Vista/Windows 7 When using another system other than the above or no computer, see “Charging the battery with the included USB-AC adapter” (p. 13). Inserting the battery 1 STYLUS TOUGH-8010/ μ TOUGH-8010 STYLUS TOUGH-6020/ μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 3 2 1 Battery/card/ connector cover lock Battery/card/ connector cover LOCK knob 2 1 Battery/card/ connector cover lock Battery/card/ connector cover 2 STYLUS TOUGH-8010/μ TOUGH-8010 Battery lock knob STYLUS TOUGH-6020/μ TOUGH-6020 STYLUS TOUGH-3000/μ TOUGH-3000 Battery lock knob STYLUS TOUGH-6020/ μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000
Page: 12
12 EN Do not insert SD/SDHC memory cards before the camera setup. Do not format the internal memory until the camera setup is complete. Doing so will erase the camera instruction manual and the PC software (ib) data that are stored on the internal memory. Check that your computer meets the following system requirements: Windows XP (SP2 or later)/ Windows Vista/Windows 7 Refer to the PC software (ib) help guide for details on how to use the PC software (ib). 2 Select and execute “OLYMPUS Camera Initialization”, which is displayed on the computer screen when the camera is recognized by the computer. If nothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Leave the camera connected to the computer until the battery has charged, then disconnect and reconnect the camera. Even if a computer has USB ports, proper operation is not guaranteed in the following cases: Computers with USB ports installed using an expansion card, etc. Computers without a factory-installed OS and home-built computers Double-click the icon for the camera drive (Removable Disk), and then execute Setup.exe to start the camera setup. 3 Follow the instructions on the computer screen and setup the camera. ● ● 1 Connect the camera to the computer. When connecting the camera to the computer via USB cable, face the lens downward. Multi-connector USB cable (supplied) Computer (on and running) Indicator lamp Charging the battery When the camera is connected to the computer, the battery in the camera will be charged. When charging, the indicator lamp light. When charging is complete, the indicator lamp will turn off. If the indicator lamp does not light, the camera may be incorrectly connected, or the battery, camera, computer or USB cable may not be functioning correctly. Camera setup Set the camera date and time, time zone and display language automatically; install the camera instruction manual and PC software (ib). ●
Page: 13
13 EN Charging the battery with the included USB-AC adapter The included USB-AC adapter (F-2AC) (hereafter referred as AC adapter) has been designed to be used for charging and playback. Make sure that shooting is not being used while the AC adapter is connected to the camera. Example: AC adapter with an AC cable 1 1 2 3 Multi-connector AC outlet USB cable (supplied) When connecting the camera to the computer via USB cable, face the lens downward. 2 STYLUS TOUGH-8010/μ TOUGH-8010 Indicator lamp On: Charging Off: Charged STYLUS TOUGH-6020/μ TOUGH-6020 Indicator lamp On: Charging Off: Charged STYLUS TOUGH-3000/μ TOUGH-3000 Indicator lamp On: Charging Off: Charged The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020: up to 3 hours, STYLUS TOUGH-3000/ μ TOUGH-3000: up to 2.5 hours). If the indicator lamp does not light, the AC adapter is not connected to the camera correctly, or the battery, camera, or AC adapter may be broken. For details on the battery and the AC adapter, see “Battery, USB-AC adapter (included), Charger (sold separately)” (p. 63). Battery can be charged by connecting the camera to the computer. However, when charging with the system other than Windows XP (SP2 or later)/Windows Vista/ Windows 7, charging takes much time. When to charge the batteries Charge the battery when the error message shown below appears. Monitor top left Error message Flashes in red 4 4 BATTERY EMPTY 14M
Page: 14
14 EN When not using a computer See the next section under “Setting the date, time and time zone.” When using a computer with system other than Windows XP (SP2 or later)/ Windows Vista/Windows 7 Connect the camera to the computer and copy the instruction manual PDF file for your language in the “Manual” folder in the internal memory of the camera. Setting the date, time and time zone The date and time set here are saved to image file names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. Date and time setting screen X Y/M/D Y M D TIME -- -- -- -- : . . MENU CANCEL ---- ---- 2 Use FG to select the year for [Y]. -- -- -- -- : . MENU CANCEL X . Y/M/D Y M D TIME 2010 2010 ● 3 Press I to save the setting for [Y]. -- -- -- : . . 2010 X Y/M/D Y M D TIME MENU CANCEL 00 00 4 As in Steps 2 and 3, use FGHI and the A button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order). For precise time setting, press the A button as the time signal strikes 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 47) 5 Use HI to select the [x] time zone and then press the A button. Use FG to turn daylight saving time ([SUMMER]) on or off. ’10.02.26 12:30 SUMMER OK SET Seoul Tokyo Seoul Tokyo The menus can be used to change the selected time zone. [WORLD TIME] (p. 48) ●
Page: 15
15 EN Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Display the [SETUP] menu. “Using the Menu” (p. 4) 2 Use FG to select the r (Settings 1) tab and then press I. COPY ENGLISH RESET USB CONNECTION PC MENU OK MEMORY FORMAT DATA REPAIR SET EXIT 1 2 3 1 2 INTERNAL/SD INTERNAL/SD AUTO AUTO 3 Use FG to select [l] and press the A button. 4 Use FGHI to select your language and press the A button. 5 Press the m button. Inserting the SD/SDHC memory card (sold separately) Always use SD/SDHC memory cards with this camera. Do not insert other types of memory card. “Using a SD/SDHC memory card” (p. 64) Although the camera can store images in internal memory, SD/SDHC memory cards (sold separately) can be also used to store pictures. 1 Insert the card straight until it clicks into place. Do not touch the contact area directly. 2 STYLUS TOUGH-8010/ μ TOUGH-8010 STYLUS TOUGH-6020/ μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 1 2 3 1 2 Close the battery/card/connector cover firmly so that lock makes the clicking sound. “Number of storable pictures (still images)/ Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 66) To remove the SD/SDHC memory card 1 2 Press the card in until it clicks and comes out slightly, then remove the card. Write-protect switch Contact area Write-protect switch Contact area
Page: 16
16 EN Shooting, Playback, and Erasing 2 Hold the camera and compose the shot. Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash with your fingers, etc. 3 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. P P 1/400 F3.9 1/400 F3.9 AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 60) ● ● Shooting with the optimum aperture value and shutter speed (P mode) In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. P mode indicator 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 00:34 00:34 Number of storable still pictures (p. 66, 67, 68) Monitor (standby mode screen) If P mode is not displayed, press the m button to display the function menu screen and then set the shooting mode to P. “Using the Menu” (p. 4) Current shooting mode display 4 4 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO PROGRAM AUTO PROGRAM AUTO 14M P P Press the n button again to turn off the camera.
Page: 17
17 EN 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. P P 1/400 F3.9 1/400 F3.9 Image review screen Press fully To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button or press the shutter button halfway down. Shooting movies 1 Press the movie record button to start recording. 00:12 00:12 REC REC 00:34 00:34 Lights up red when recording Recording time Continuous recording length (p. 66, 67, 68) The effects of the set shooting mode can be used when shooting movies (when P mode, p mode or Q mode is set, shooting is performed with the P mode setting). 2 Press the movie record button again to stop recording. Sound will also be recorded. When recording sound in a movie, the sound of the lens triggering and camera operating may be recorded. STYLUS TOUGH-3000/μ TOUGH-3000: During sound recording, only the digital zoom can be used. To record a movie with optical zoom, set [R] (movies) (p. 36) to [OFF]. Using the zoom Pressing the zoom buttons adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button 14M 4 4 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 00:34 00:34 00:34 00:34 Zoom bar Model No. Optical zoom Digital zoom STYLUS TOUGH-8010/ μ TOUGH-8010 5× 5× STYLUS TOUGH-6020/ μ TOUGH-6020 5× 5× STYLUS TOUGH-3000/ μ TOUGH-3000 3.6× 5× To take larger images without reducing image quality [FINE ZOOM] (p. 35)
Page: 18
18 EN To take larger images [DIGITAL ZOOM] (p. 35) The zoom bar appearance identifies the status of the fine zoom/digital zoom. Fine zoom range Digital zoom range When using optical zoom When using fine zoom When using digital zoom Optical zoom range Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press F (INFO). The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 9) 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M 4 4 NORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 00:34 00:34 00:34 00:34 Normal Detailed No information ● Reading a histogram If the peak fills too much of the frame, the image will appear mostly white. If the peak fills too much of the frame, the image will appear mostly black. The green section shows luminance distribution within the screen’s center. Viewing images 1 Press the q button. Number of frames/ Total number of images ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 Playback image 2 Use HI to select an image. Displays previous image Displays next image Hold I to fast forward and hold H to reverse. The display size of the images can be changed. “Index view, close-up view, and event index” (p. 20)
Page: 19
19 EN Pausing and restarting playback Press the A button to pause playback. During pause, fast forward or reverse, press the A button to restart playback. Fast forward Press I to fast forward. Press I again to increase the fast forward speed. Rewind Press H to rewind. The speed at which the recording rewinds increases each time H is pressed. Adjusting the volume Use FG to adjust the volume. Operations while playback is paused During pause 00:14/00:34 00:14/00:34 Cueing Use F to display the first frame and press G to display the last frame. Advancing and rewinding one frame at a time Press I or H to advance or rewind one frame at a time. Hold I or H pressed for continuous advance or rewind. Resuming playback Press the A button to resume playback. To stop movie playback Press the m button. To play sound recordings To play sound recorded with an image, select the image and press the A button. A ! icon appears on images with which sound has been recorded. [R] (still images) (p. 35, 43) During audio playback To play back movies Select a movie, and press the A button. ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 OK MOVIE PLAY MOVIE PLAY Movie Operations during movie playback 00:12/00:34 00:12/00:34 During playback Elapsed time/ Total recording time
Page: 20
20 EN Erasing images during playback (Single image erase) 1 Display the image you want to erase and press G (D). MENU OK ERASE SEL. IMAGE ALL ERASE CANCEL CANCEL ERASE SET BACK 2 Press FG to select [ERASE], and press the A button. [ALL ERASE] (p. 42) and [SEL. IMAGE] (p. 42) can be used to erase multiple images at the same time. Index view, close-up view, and event index Index view enables quick selection of a desired image. Close-up view (up to 10× magnification) allows checking of image details. In event index*1 , images are grouped by the shooting dates and representative images for an event can be displayed. *1 Pictures with different dates can be grouped into the same event using the PC software (ib). 1 Press the zoom buttons. ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 ’10/02/26 ’10/02/26 12:30 ’10/02/26 12:30 2 4 4 ’10/02/26 4 2 W T W T W T 2 2 4 W T 4/30 4/30 ’10/02/26 Index view Single-image view Close-up view Event index
Page: 21
21 EN To select an image in index view Use FGHI to select an image, and press the A button to display the selected image in single-image view. To scroll an image in close-up view Use FGHI to move the viewing area. To select an image in event index Use HI to select the representative image and press the A button. The images in the selected event are played back. Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press F (INFO). The displayed image information changes in the order shown below each time the button is pressed. 10 10 ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 10 10 4/30 4/30 1/1000 F3.9 2.0 AUTO WB AUTO ISO FILE 100 0004 ’10/02/26 12:30 P NORM 14M 960hPa 0m Normal Detailed No information “Reading a histogram” (p. 18) ● Playing back panorama images Panorama images that were combined together using [AUTO] or [MANUAL] can be scrolled for viewing. “Creating panoramic images (p mode)” (p. 25) 1 Select a panorama image during playback. “Viewing images” (p. 18) ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 OK REPLAY 2 Press the A button. Current viewing area To control panorama image playback Zoom in/Zoom out: Press the A button to pause playback. Then press the zoom button to enlarge/shrink the image. Playback direction: Press the A button to pause playback. Then press FGHI to scroll the image in the direction of the pressed button. Pause: Press the A button. Restart scrolling: Press the A button. Stop playback: Press the m button.
Page: 22
22 EN Using the menu guide If the E button is pressed while settings are being adjusted in the playback function or [SETUP] menus, a description of the selected option is displayed. “Using the Menu” (p. 4) Using the camera guide Use the camera guide to look up camera operations. 1 Press the E button in the standby mode screen or the playback screen. IN-CAMERA MANUAL Learn about the camera History Message OK SET EXIT Search Search Submenu 2 Application Search Functions or operating methods can be searched from a term or shooting objective. Learn about the camera Information is shown about recommended functions and basic operating methods for the camera. History Searches can be performed from the search history. Message Messages from the camera can be viewed. 2 Use FG to select the desired item. History Message IN-CAMERA MANUAL OK SET EXIT Search Learn about the camera Learn about the camera Follow the on-screen instructions to search the desired contents. ●
Page: 23
23 EN Using Shooting Modes Using the best mode for the shooting scene (s mode) 1 Set the shooting mode to s. 14M 4 4 SCENE MODE SCENE MODE 0.0 0.0 AUTO WB AUTO WB 2 Press G to go to the submenu. 14M 4 4 0.0 0.0 AUTO WB AUTO WB PORTRAIT PORTRAIT 3 Use HI to select the mode and then press the A button to set. 14M 4 4 0.0 0.0 AUTO WB AUTO WB 00:34 00:34 Icon indicating the scene mode that is set To change the shooting mode The shooting mode (P, M, s, P, p, Q) can be changed with using the function menu. “Using the Menu” (p. 4) Shooting with automatic settings (M mode) The camera will automatically select the optimal shooting mode for the scene. This is a fully automatic mode that allows you to take a picture suited to the scene by simply pressing the shutter button. In M mode, settings in the shooting menu can be selected, but the changed setting is not reflected in the actual shot. 1 Set the shooting mode to M. 4 4 14M NORM 00:34 00:34 The icon changes depending on the scene that the camera automatically selects. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify the optimal mode, P mode will be selected.
Page: 24
24 EN In s modes, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, settings may not be changed in some modes. Option Application BPORTRAIT/FLANDSCAPE/ GNIGHT SCENE*1 / MNIGHT+PORTRAIT/ CSPORT/NINDOOR/ WCANDLE*1 / RSELF PORTRAIT/ SSUNSET*1 /XFIREWORKS*1 / VCUISINE/dDOCUMENTS/ qBEACH & SNOW/ TSNAPSHOT/kWIDE1*2 / lWIDE2*2 /HMACRO*2 / PET/aSNOW*2 The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. *2 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only To take underwater photos Select [T SNAPSHOT], [k WIDE1]*1 , [l WIDE2]*1, 2 , [H MACRO]*1 . *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only *2 When set to [l WIDE2], the focus distance is automatically fixed to approx. 5.0 m (16.4 ft.). “Important information about water and shock resistant features” (p. 69) To lock the focus distance for underwater shoots (AF lock) When [T SNAPSHOT], [k WIDE1]* , or, [H MACRO]* is selected, press the A button. * STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only 14M 4 4 0.0 0.0 AUTO WB AUTO WB AFLOCK AFLOCK AF lock mark To cancel, press the A button again to clear the AF lock mark. To take pictures of a moving subject like a pet ([ PET] mode) 1 Use HI to select [ PET], and press the A button to set. 2 Hold the camera to align the AF target mark on the subject and press the A button. When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. “To focus on a moving subject continuously (AF Tracking)” (p. 34). Shooting with special effects (P mode) To add expression to your photo, select the desired special effect. 1 Set the shooting mode to P. MAGIC FILTER MAGIC FILTER 0.0 0.0 AUTO WB AUTO WB 14M 4 4 2 Press G to go to the submenu. POP ART 0.0 0.0 AUTO WB AUTO WB ●
Page: 25
25 EN 3 Use HI to select the desired effect and then press the A button to set. 0.0 0.0 AUTO WB AUTO WB 14M 4 4 00:34 00:34 Icon indicating P mode that is set Shooting mode Option MAGIC FILTER [POP ART \PIN HOLE ]FISH EYE @DRAWING In P mode, the optimum shooting settings are pre-programmed for each scene effect. For this reason, some settings cannot be changed in some modes. Creating panoramic images (p mode) 1 Set the shooting mode to p. PANORAMA PANORAMA 0.0 0.0 AUTO WB AUTO WB AUTO AUTO 14M 4 4 2 Press G to go to the submenu. 3 Use HI to select the desired mode and then press the A button to set. Submenu 1 Application AUTO Three frames are taken and combined by the camera. The user only composes the shots so that the target marks and pointers overlap, and the camera automatically releases the shutter. MANUAL Three frames are taken and combined by the camera. The user composes the shots using the guide frame and manually releases the shutter. PC The frames that were taken are combined into a panorama image using the PC software (ib). For details on installing the PC software (ib), see “Battery charge and camera setup” (p. 11). When set to [AUTO] or [MANUAL], [IMAGE SIZE] (p. 33) is fixed to [2]. The focus, exposure (p. 30), zoom position (p. 17), and white balance (p. 30) are locked at the first frame. The flash (p. 28) is fixed to $ (FLASH OFF) mode. Taking pictures with [AUTO] 1 Press the shutter button to take the first frame. 2 Move the camera slightly in the direction of the second frame. AUTO AUTO MENU OK SAVE CANCEL Target mark Pointer Screen when combining images from left to right
Page: 26
26 EN 3 Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap. The camera releases the shutter automatically. AUTO AUTO MENU OK SAVE CANCEL To combine only two pictures, press the A button before taking a third frame. 4 Repeat Step 3 to take a third frame. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To exit the panorama function without saving an image, press the m button. If the shutter does not automatically release, try [MANUAL] or [PC]. Taking pictures with [MANUAL] 1 Use HI to specify at which edge the next picture is to be connected. MANUAL MANUAL 1 2 1 2 MENU BACK Direction for combining the next frame ● ● 2 Press the shutter button to take the first frame. 1st frame MANUAL MANUAL 1 2 1 2 MANUAL MANUAL 1 2 1 2 MENU BACK MENU OK SAVE CANCEL Joint areas 3 Compose the next shot so that joint area 1 overlaps joint area 2. Composition of the 2nd frame MANUAL MANUAL 1 2 1 2 MENU OK SAVE CANCEL 4 Press the shutter button to take the next shot. To combine only two pictures, press the A button before taking the third frame. 5 Repeat steps 3 and 4 to take a third frame. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To exit the panorama function without saving an image, press the m button. ●
Page: 27
27 EN Taking pictures with [PC] 1 Use FGHI to select the direction that the frames are combined. 2 Press the shutter button to take the first frame, and then compose the second shot. PC PC 1 2 1 2 MENU EXIT PC PC 1 2 1 2 MENU BACK Before first shot After first shot After the first shot, the area shown in white reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image in the monitor. 3 Repeat Step 2 until the number of desired frames is taken, and then press the A button or m button when finished. Panorama shooting is possible for up to 10 frames. Refer to the PC software (ib) help guide for details on how to make panorama images. ● Smoothing out skin tone and texture (Q mode) The camera identifies a person’s face and gives the skin a smooth, translucent look for taking the picture. 1 Set the shooting mode to Q. 14M 4 4 0.0 0.0 AUTO WB AUTO WB BEAUTY BEAUTY P P 2 Point the camera toward the subject. Check the frame appearing around the face detected by the camera, and then press the shutter button to take the picture. The unedited image and edited image are both saved. If the image cannot be retouched, only the unedited image is saved. The frame may not appear or may take some time to appear for some subjects. In addition, this function may have no visible effect on some subjects. The [IMAGE SIZE] of the retouched image is limited to [n] or lower. ● ●
Page: 28
28 EN Using Shooting Functions Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Select the macro option in the shooting function menu. 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO OFF OFF 2 Use HI to select the setting option, and press the A button to set. “Using the Menu” (p. 4) Using the flash The flash functions can be selected to best match the shooting conditions. 1 Select the flash option in the shooting function menu. 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO FLASH AUTO FLASH AUTO 2 Use HI to select the setting option, and press the A button to set. Option Description FLASH AUTO The flash fires automatically in low-light or backlight conditions. REDEYE Pre-flashes are emitted to reduce the occurrence of red eye in your photos. FILL IN The flash fires regardless of the available light. FLASH OFF The flash does not fire. REMOTE CONTROL* For details, see “Using an external flash” (p. 37). SLAVE * STYLUS TOUGH-8010/μ TOUGH-8010 only [REMOTE CONTROL] and [SLAVE] are not displayed when [REMOTE FLASH] (p. 37) is set to [OFF].
Page: 29
29 EN Option Application Description OFF Macro mode is deactivated. ― MACRO This enables the camera to shoot subjects at close distances. When the zoom is at the widest (W) position, this function enables shooting as close as the following distances. STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 20 cm (7.9 in.) 10 cm (3.9 in.) When the zoom is at the most telephoto (T) position, this function enables shooting as close as the following distances. STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 50 cm (19.7 in.) 30 cm (11.8 in.) SUPER MACRO*1 This enables the camera to shoot subjects at even closer distances. This function enables shooting as close as the following distances. STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 3 cm (1.2 in.) 2 cm (0.8 in.) Subjects at the following or farther distances cannot be brought into focus. STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020 STYLUS TOUGH-3000/ μ TOUGH-3000 60 cm (23.6 in.) 50 cm (19.7 in.) S-MACRO LED*2, 3 The LED illuminator lights the area 7 to 20 cm (2.8 to 7.9 in.) from the lens, while the shutter button is pressed halfway down. ― *1 The zoom is automatically fixed. *2 ISO sensitivity (p. 31) is automatically fixed to [ISO AUTO]. *3 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only The flash (p. 28) and zoom (p. 17) cannot be set when [a SUPER MACRO] or [N S-MACRO LED] is selected.
Page: 30
30 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Select the self-timer option in the shooting function menu. 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO OFF 12 12 2 2 OFF 2 Use HI to select the setting option, and press the A button to set. Option Description Y OFF The self-timer is deactivated. Y 12 SEC The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Y 2 SEC The self-timer lamp blinks for approx. 2 seconds, then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the m button. Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (except for M) can be adjusted brighter or darker to obtain a desired shot. 1 Select the exposure compensation option in the shooting function menu. 0.0 0.3 0.3 0.0 0.0 0.3 0.3 AUTO WB AUTO WB AUTO ISO AUTO ISO P P 2 Use HI to select the desired brightness, and press the A button. Adjusting to a natural color scheme (White balance) For more natural coloring, choose a white balance option suited to the scene. 1 Select the white balance option in the shooting function menu. 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P WB AUTO
Page: 31
31 EN 2 Use HI to select the setting option, and press the A button to set. Option Description WB AUTO The camera automatically adjusts the white balance according to the shooting scene. 5 For shooting outdoors under a clear sky. 3 For shooting outdoors under a cloudy sky. 1 For shooting under tungsten lighting. w For shooting under daylight fluorescent lighting (household lighting, etc.) x For shooting under neutral fluorescent lighting (desk lamps, etc.) y For shooting under white fluorescent lighting (offices, etc.) O* For underwater shooting (this setting is available when the s mode is set to [k WIDE1]). P* For underwater shooting (this setting is available when the s mode is set to [l WIDE2]). Q* For underwater shooting (this setting is available when the s mode is set to [H MACRO]). * STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only Selecting the ISO sensitivity Abbreviation for the International Organization for Standardization. ISO standards specify the sensitivity for digital cameras and film, thus codes such as “ISO 100” are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. 1 Select the ISO setting option in the shooting function menu. P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 1600 ISO ISO 1600 1/400 F3.9 1/400 F3.9 HIGH ISO HIGH ISO ISO AUTO ISO AUTO 2 Use HI to select the setting option, and press the A button to set. Option Description ISO AUTO The camera automatically adjusts the sensitivity according to the shooting scene. HIGH ISO AUTO The camera uses a higher sensitivity compared to [ISO AUTO] to minimize blur caused by a moving subject or by camera shake. Value The ISO sensitivity is fixed to the selected value.
Page: 32
32 EN Sequential shooting (Drive) Pictures are taken sequentially while the shutter button is held down. 1 Select the drive option in the shooting function menu. 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P SEQUENTIAL SEQUENTIAL Option Description o One frame is shot each time the shutter button is pressed. j*1 Take sequential shots using the focus, brightness (exposure) and white balance set in the first frame. W The camera takes sequential shots at a faster speed than in [j]. *1 The shooting speed varies depending on the settings for [IMAGE SIZE/COMPRESSION] (p. 33). When set to [j], the flash (p. 28) cannot be set to [REDEYE]. In addition, when set to [W] the flash is fixed to [FLASH OFF]. When set to [W], [IMAGE SIZE] is limited to [3] or lower, and the ISO sensitivity is fixed to [ISO AUTO]. Using the LED illuminator (STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only) In a dark location, the LED illuminator can be used as an auxiliary light to see things or compose shots. 1 Set [LED ILLUMINATOR] (p. 52) to [ON]. 2 Press and hold F down until the LED illuminator lights up. If you perform an operation when the LED illuminator is on, it will illuminate up to approx. 90 seconds. LED illuminator The LED illuminator turns off if no operation is performed for approx. 30 seconds. Even when the camera’s power is turned off, if F is pressed until the LED illuminator lights up, it lights for 30 seconds. To turn the LED illuminator off Press and hold F down, until the LED illuminator turns off. ●
Page: 33
33 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Shooting Functions The default settings of the function are highlighted in . Selecting the image quality for still images [IMAGE SIZE/COMPRESSION] I (Shooting menu 1) X IMAGE SIZE/COMPRESSION Available shooting modes: P M s P p Q Submenu 1 Submenu 2 Application IMAGE SIZE 14M (4288×3216)*1 Suitable for printing pictures over A3 (11×17 in.). 12M (3968×2976)*2 8M (3264×2448) Suitable for printing pictures up to A3 (11×17 in.). 5M (2560×1920) Suitable for printing pictures at A4 (8.5×11 in.). 3M (2048×1536) Suitable for printing pictures up to A4 size (8.5×11 in.). 2M (1600×1200) Suitable for printing pictures at A5 (5×7 in.). 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures on emails and web sites. 16:9G (4288×2416)*1 (3968×2232)*2 Suitable for playing pictures on a widescreen TV and for printing on A3 or 11"×17". 16:9F (1920×1080) Suitable for playing pictures on a widescreen TV and for printing on A5 or 5"×7". COMPRESSION FINE Shooting at high quality. NORMAL Shooting at normal quality. *1 STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only *2 STYLUS TOUGH-3000/μ TOUGH-3000 only “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 66) Selecting the image quality for movies [IMAGE SIZE/IMAGE QUALITY] A (Movie menu) X IMAGE SIZE/IMAGE QUALITY Available shooting modes: P M s P p Q Submenu 1 Submenu 2 Application IMAGE SIZE 720P VGA (640×480) QVGA (320×240) Select the image quality based on the image size and frame rate. IMAGE QUALITY FINE/NORMAL Select [FINE] to shoot with higher image quality. “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 66) When [IMAGE SIZE] is set to [QVGA], [IMAGE QUALITY] is fixed to [FINE].
Page: 34
34 EN Brightening the subject against backlight [SHADOW ADJUST] I (Shooting menu 1) X SHADOW ADJUST Available shooting modes: P M s P p Q Submenu 2 Application AUTO The shadow adjustment effect is applied when shooting against backlight. OFF The effect is not applied. ON Shoot with automatic adjustment to brighten an area that has become darker. When set to [ON], [ESP/n] (p. 34) is automatically fixed to [ESP]. Selecting the focusing area [AF MODE] I (Shooting menu 1) X AF MODE Available shooting modes: P M s P p Q Submenu 2 Application FACE/iESP*1 The camera focuses automatically. (If a face is detected, it is shown by a white frame*1 ; when the shutter button is pressed halfway and the camera focuses, the frame turns to green*2 . If no face is detected, the camera chooses a subject in the frame and focuses automatically.) SPOT The camera focuses on the subject located within the AF target mark. AF TRACKING The camera tracks the subject movement automatically to focus on it continuously. *1 For some subjects, the frame may not appear or may take some time to appear. *2 If the frame blinks in red, the camera cannot focus. Try refocusing on the subject. To focus on a moving subject continuously (AF Tracking) 1 Hold the camera to align the AF target mark on the subject and press the A button. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. 3 To cancel the tracking, press the A button. Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or fail to track the subject movement. When the camera fails to track the subject movement, the AF target mark changes to red. Selecting the method for measuring the brightness [ESP/n] I (Shooting menu 1) X ESP/n Available shooting modes: P M s P p Q Submenu 2 Application ESP Shoots to obtain a balanced brightness over the entire screen (Meters the brightness at the center and surrounding areas of the screen separately). 5 (spot) Shoots the subject at the center during backlighting (Meters the brightness at the center of the screen). When set to [ESP], the center may appear dark when shooting against strong backlighting.
Page: 35
35 EN For information on using the menus, see “Using the Menu” (p. 4). Shooting at higher magnifications than optical zoom without reducing the image quality [FINE ZOOM] I (Shooting menu 1) X FINE ZOOM Available shooting modes: P M s P p Q Submenu 2 Application OFF Optical zoom is used to zoom in for shooting. ON Optical zoom and image cropping are combined to zoom in for shooting.*1 *1 STYLUS TOUGH-8010/ μ TOUGH-8010, STYLUS TOUGH-6020/ μ TOUGH-6020 Approx. 33.5× (max.) STYLUS TOUGH-3000/ μ TOUGH-3000 Approx. 22× (max.) This function will not reduce the image quality since it dose not convert the data with fewer pixels into the data with larger pixels. When set to [ON], [IMAGE SIZE] is limited to [4] or lower. The setting is not available when [DIGITAL ZOOM] is set to [ON]. [FINE ZOOM] is not available when [a SUPER MACRO] (p. 28) or [N S-MACRO LED] (p. 28) is selected. Shooting at higher magnifications than optical zoom [DIGITAL ZOOM] I (Shooting menu 1) X DIGITAL ZOOM Available shooting modes: P M s P p Q Submenu 2 Application OFF Only optical zoom is used to zoom in for shooting. ON Optical zoom and digital zoom are combined to zoom in for shooting.*1 *1 STYLUS TOUGH-8010/ μ TOUGH-8010, STYLUS TOUGH-6020/ μ TOUGH-6020 Approx. 25× (max.) STYLUS TOUGH-3000/ μ TOUGH-3000 Approx. 18× (max.) The setting is not available when [FINE ZOOM] is set to [ON]. [DIGITAL ZOOM] is not available when [a SUPER MACRO] (p. 28) or [N S-MACRO LED] (p. 28) is selected. Recording sound when shooting still images [R] J (Shooting menu 2) X R Available shooting modes: P M s P p Q Submenu 2 Application OFF No sound is recorded. ON The camera automatically starts recording sound for approx. 4 seconds after a picture is taken. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 7*1 , 8*2 ) at the source of the sound you want to record. *1 STYLUS TOUGH-3000/μ TOUGH-3000 *2 STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020
Page: 36
36 EN Recording sound when shooting movies [R] A (Movie menu) X R Available shooting modes: P M s P p Q Submenu 2 Application OFF No sound is recorded. ON Sound is recorded. When recording sound in a movie, the sound of the lens triggering and camera operating may be recorded. STYLUS TOUGH-3000/μ TOUGH-3000: When set to [ON], only the digital zoom can be used during movie recording. To record the movie with the optical zoom, set [R] (movies) to [OFF]. Reducing the blur caused by the camera shake when shooting [IMAGE STABILIZER] (still images)/ [IS MOVIE MODE] (movies) I (Shooting menu 1) X IMAGE STABILIZER (still images)/ A (Movie menu) X IS MOVIE MODE (movies) Available shooting modes: P M s P p Q Submenu 2 Application OFF The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. ON The image stabilizer is activated. The camera’s default settings are [IMAGE STABILIZER] (still images) to [ON] and [IS MOVIE MODE] (movies) to [OFF]. There may be a noise coming from inside the camera when the shutter button is pressed with [IMAGE STABILIZER] (still images) set to [ON]. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking pictures at night, [IMAGE STABILIZER] (still images) may not be as effective. When shooting while the [IS MOVIE MODE] (movies) is set to [ON], the image will be enlarged somewhat before saving. Viewing the image immediately after shooting [REC VIEW] J (Shooting menu 2) X REC VIEW Available shooting modes: P M s P p Q Submenu 2 Application OFF The image being recorded is not displayed. This allows the user to prepare for the next shot while following the subject in the monitor after shooting. ON The image being recorded is displayed. This allows the user to make a brief check of the image that was just taken.
Page: 37
37 EN For information on using the menus, see “Using the Menu” (p. 4). Automatically rotating images shot with the camera in a vertical position during playback [PIC ORIENTATION] (STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only) J (Shooting menu 2) X PIC ORIENTATION Available shooting modes: P M s P p Q During shooting, the [y] (p. 43) setting on the playback menu is set automatically. This function may not work properly if the camera is facing up or down during shooting. Submenu 2 Application OFF Information about the vertical/ horizontal orientation of the camera during shooting is not recorded with images. Images shot with the camera in a vertical position are not rotated during playback. ON Information about the vertical/ horizontal orientation of the camera during shooting is recorded with images. Images are automatically rotated during playback. Displaying icon guides [ICON GUIDE] J (Shooting menu 2) X ICON GUIDE Available shooting modes: P M s P p Q Submenu 2 Application OFF No icon guide is displayed. ON The explanation of the selected icon will be displayed when a shooting mode or shooting function menu icon is selected (position the cursor on the icon for a while to display the explanation). Icon guide 14M 4 4 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO P P Functions can be changed manually. PROGRAM AUTO PROGRAM AUTO Using an external flash [REMOTE FLASH] (STYLUS TOUGH-8010/μ TOUGH-8010 only) J (Shooting menu 2) X REMOTE FLASH Available shooting modes: P M s P p Q Submenu 2 Application OFF The external flash is not available. #RC An Olympus Wireless RC Flash System compatible flash is used for taking pictures. (Channel: CH1, Group: A) SLAVE The commercially-available slave flash that is synchronized with the camera flash is used for taking pictures. The flash intensity setting can be adjusted. “Taking pictures with the Olympus Wireless RC Flash System” (p. 69)
Page: 38
38 EN Menus for Playback, Editing, and Printing Functions The default settings of the function are highlighted in . Data must have been created with the PC software (ib) before using some function. Refer to the PC software (ib) help guide for details on how to use the PC software (ib). For details on installing the PC software (ib), see “Battery charge and camera setup” (p. 11). Playing back pictures automatically [SLIDESHOW] SLIDESHOW Submenu 1 Submenu 2 Application SLIDE ALL/EVENT/ COLLECTION Selects the content to be included in the slideshow. BGM OFF/Cosmic/ Breeze/ Mellow/ Dreamy/ Urban Selects the background music options. TYPE STANDARD/ FADE/ZOOM Selects the type of transition effect used between slides. START ― Starts the slideshow. Single-frame advance/rewind: During a slideshow, press I to skip ahead one frame or press H to go back one frame. Searching for images and playing back the related images [PHOTO SURFING] PHOTO SURFING In [PHOTO SURFING], images can be searched and related images can be played back by selecting the related items. To start [PHOTO SURFING] Press the A button to start [PHOTO SURFING]. When a related item of the image displayed is selected with FG, images related to the item are displayed in the lower part of the monitor. Use HI to display an image. To select the related items undisplayed, press the A button when selecting an item. To stop [PHOTO SURFING], press the m button, or select [BACK] and press the A button. 2010/ 02/26 2010/ 02/26 35ºN 139ºE 35ºN 139ºE BACK BACK Related items Images corresponding the related items
Page: 39
39 EN For information on using the menus, see “Using the Menu” (p. 4). Viewing images by event [EVENT q] EVENT q In [EVENT q], images in an event are played back. (Images with the same shooting date are grouped into the same event.) To start [EVENT q] Press the A button to start [EVENT q]. (The event, including the image for which single-image view was being performed when the playback function menu was selected, is played back.) Use HI to advance or rewind by one frame. To stop [EVENT q], press the m button. ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 MENU OK EXIT EXIT PLAY PLAY Playing back images by Collection created with the PC software (ib) [COLLECTION q] COLLECTION q In [COLLECTION q], the collection is played back that has been created with the PC software (ib) and imported back from a computer. To start [COLLECTION q] Press the A button, and then use FGHI to select the desired collection. Press the A button again to start playback of the selected collection. Use HI to advance or rewind by one frame. To stop [COLLECTION q], press the m button. COLLECTION MENU OK SET BACK Using a PC software (ib) and importing data back to the camera The following functions can be performed when data created with the PC software (ib) is imported back to the camera. Refer to the PC software (ib) help guide for details on how to use the PC software (ib). [PHOTO SURFING] Information of persons or shooting locations and new Collections can be added in the related items. [EVENT q] Images can be played back by event created with the PC software (ib). Event index (p. 20) The representative images for an event created with the PC software (ib) can be displayed.
Page: 40
40 EN Retouching the skin and eyes [BEAUTY FIX] BEAUTY FIX Depending on the picture, the editing may not be effective. Submenu 1 Submenu 2 Application ALL ― [CLEAR SKIN], [SPARKLE EYE] and [DRAMATIC EYE] are applied together. CLEAR SKIN SOFT/AVG/ HARD Makes skin look smooth and translucent. Select the correction effect from 3 levels. SPARKLE EYE ― Enhances the contrast of the eyes. DRAMATIC EYE ― Enlarges the subject’s eyes. 1 Use FG to select a correction item, and press the A button. 2 Use HI to select an image for retouching, and press the A button. The retouched image is saved as a separate image. When [CLEAR SKIN] is selected Use FG to select the retouching level, and press the A button. CLEAR SKIN MENU OK SET BACK AVG SOFT SOFT HARD ● Changing the image size [Q] EDIT X Q Submenu 2 Application C 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications. E 320 × 240 1 Use HI to select an image. 2 Use FG to select an image size and press the A button. The resized image is saved as a separate image. Cropping image [P] EDIT X P 1 Use HI to select an image, and press the A button. 2 Use the zoom buttons to select the size of the cropping frame, and use FGHI to move the frame. Cropping frame OK SET 3 Press the A button after you have selected the area to trim. The edited image is saved as a separate image. ● ●
Page: 41
41 EN For information on using the menus, see “Using the Menu” (p. 4). Changing the color tone of image [COLOR EDIT] EDIT X COLOR EDIT Submenu 2 Application BLACK & WHITE This changes the image to black and white. SEPIA This changes the image to a sepia tone. HIGH SATURATION This increases the color saturation of the image. LOW SATURATION This slightly increases the color saturation of the image. COLOR EDIT MENU OK SET EXIT SEPIA 1 Use HI to select an image, and press the A button. 2 Use HI to select the desired color, and press the A button. The image with the selected color is saved as a separate image. Adding a calendar to an image [CALENDAR] EDIT X CALENDAR CALENDAR OK SET 1 Use HI to select an image, and press the A button. 2 Use HI to select a calendar. Use FG to select the image orientation, and then press the A button. ● 3 Use FG to select the Year of the calendar, and press I. 4 Use FG to select the Month of the calendar, and press the A button. The edited image is saved as a separate image. Brightening areas that are dark due to backlight or other reasons [SHADOW ADJ] EDIT X SHADOW ADJ 1 Use HI to select an image, and press the A button. The edited image is saved as a separate image. Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Retouching red eyes in flash shooting [REDEYE FIX] EDIT X REDEYE FIX 1 Use HI to select an image, and press the A button. The edited image is saved as a separate image. Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. ● ● ●
Page: 42
42 EN Erasing images [ERASE] ERASE Submenu 1 Application ALL ERASE All images in the internal memory or card will be erased. SEL. IMAGE Images are individually selected and erased. ERASE/ ERASE EVENT*1 Deletes the image displayed. CANCEL Cancels deletion of the image. *1 If G is pressed when an event is played back, all images in the event are erased. When erasing pictures in the internal memory, do not insert the card into the camera. Or set [INTERNAL/SD] to [IN]. Before erasing pictures from a memory card, insert the card into the camera and select [AUTO] for [INTERNAL/SD]. “Selecting a storage device [INTERNAL/ SD]” (p. 44) Protected images cannot be erased. To individually select and erase images [SEL. IMAGE] 1 Use FG to select [SEL. IMAGE], and press the A button. 2 Use HI to select the image to be erased, and press the A button to add a R mark to the image. Press the W zoom button to display an index view. Images can be quickly selected using the FGHI buttons. Press the T button to return to the single frame display. MENU OK SEL. IMAGE ERASE/CANCEL R mark ● 3 Repeat Step 2 to select the images to be erased, and then press the m button to erase the selected images. 4 Use FG to select [YES], and press the A button. The images with a R mark are erased. To erase all images [ALL ERASE] 1 Use FG to select [ALL ERASE], and press the A button. 2 Use FG to select [YES], and press the A button. Saving print settings to the image data [PRINT ORDER] q (Playback menu) X PRINT ORDER “Print reservations (DPOF)” (p. 56) Print reservation can be set only for still images that are recorded to the card. Set [INTERNAL/SD] to [AUTO]. Protecting images [0] q (Playback menu) X 0 Protected images cannot be erased by [ERASE] (p. 20, 42), [ERASE EVENT] (p. 42), [SEL. IMAGE] (p. 42), or [ALL ERASE] (p. 42), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 44). 1 Use HI to select an image. 2 Press the A button. Press the A button again to cancel the settings. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the m button. ● ●
Page: 43
43 EN For information on using the menus, see “Using the Menu” (p. 4). Rotating images [y] q (Playback menu) X y 1 Use HI to select an image. 2 Press the A button to rotate the image. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the m button. The new picture orientations will be saved even after the power is turned off. Adding sound to still images [R] q (Playback menu) X R 1 Use HI to select an image. 2 Aim the microphone toward the sound source. STYLUS TOUGH-8010/μ TOUGH-8010 Microphone STYLUS TOUGH-6020/μ TOUGH-6020 Microphone STYLUS TOUGH-3000/μ TOUGH-3000 Microphone 3 Press the A button. Recording starts. The camera adds (records) sound for approx. 4 seconds while playing back the image. ● ●
Page: 44
44 EN The default settings of the function are highlighted in . Restoring data in the camera [DATA REPAIR] r (Settings 1) X DATA REPAIR Playback will become available by performing [DATA REPAIR] when images never appear on the monitor after q button is pressed. However, data such as collections and other groups created with the PC software (ib) is deleted from the database in the camera. Import the data back into the camera from a computer to playback the data created with the PC software (ib). Copying images in the internal memory to the card [u COPY] r (Settings 1) X u COPY To copy images in the internal memory to the card Use HI to select an image, and press the A button. Changing the display language [l] r (Settings 1) X l “Changing the display language” (p. 15) Submenu 2 Application Languages The language for the menus and error messages displayed on the monitor is selected. Menus for Other Camera Settings Selecting a storage device [INTERNAL/SD] r (Settings 1) X INTERNAL/SD Submenu 2 Application AUTO If a card is inserted, the card is automatically selected. If no card is inserted, internal memory is used. IN*1 Internal memory is selected. *1 Internal memory is used even if a card is inserted. Erasing data completely [MEMORY FORMAT]/[FORMAT] r (Settings 1) X MEMORY FORMAT/ FORMAT Before formatting, check that no important data is left in the internal memory or card. If the internal memory is formatted, the camera instruction manual and the PC software (ib) data that are stored on the internal memory are erased. If necessary, store the backup before formatting. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Submenu 2 Application YES*1 Completely erases the image data in the internal memory or card (including protected images). NO Cancels formatting. *1 If [AUTO] is selected for [INTERNAL/SD] and a card is inserted, the card will be formatted. If no card is inserted, internal memory will be formatted. If [IN] is selected for [INTERNAL/SD], internal memory will be formatted whether a card is inserted or not.
Page: 45
45 EN For information on using the menus, see “Using the Menu” (p. 4). Restoring the shooting functions to the default settings [RESET] r (Settings 1) X RESET Submenu 2 Application YES Restores the following menu functions to the default settings. Flash (p. 28) Macro (p. 28) Self-timer (p. 30) Exposure compensation (p. 30) White balance (p. 30) ISO (p. 31) Drive (p. 32) Menu functions in [I, J, A] (p. 33 to 37) • • • • • • • • NO The current settings will not be changed. Selecting a method for connecting the camera to other devices [USB CONNECTION] r (Settings 1) X USB CONNECTION Submenu 2 Application AUTO When the camera is connected to another device, the settings selection screen is displayed. STORAGE Select when connecting the camera to a computer via a storage device. PC Select when connecting a camera and computer. PRINT Select when connecting to a PictBridge-compatible printer. System requirements Windows : Windows 2000 Professional/ XP Home Edition/ XP Professional/Vista/ Windows 7 Macintosh : Mac OS X v10.3 or later When using another system other than Windows XP (SP2 or later)/Windows Vista/ Windows 7, set to [STORAGE]. Even if a computer has USB ports, proper operation is not guaranteed in the following cases: Computers with USB ports installed using an expansion card, etc. Computers without a factory-installed OS and home-built computers Turning on the camera with the q button [q POWER ON] s (Settings 2) X q POWER ON Submenu 2 Application YES Pressing the q button turns on the camera and starts the camera in the playback mode. NO The camera is not turned on. To turn on the camera, press the n button. Saving the mode when the camera is turned off [SAVE SETTINGS] s (Settings 2) X SAVE SETTINGS Submenu 2 Application YES The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. NO The shooting mode is set to P mode when the camera is turned on. Choosing the opening screen display [PW ON SETUP] s (Settings 2) X PW ON SETUP Submenu 2 Application OFF No opening screen is displayed. ON The opening screen is displayed when the camera is turned on. ● ●
Page: 46
46 EN Selecting the camera sound and its volume [SOUND SETTINGS] s (Settings 2) X SOUND SETTINGS Submenu 2 Submenu 3 Submenu 4 Application SILENT MODE*1, 2 OFF/ON — Select [ON] to disable camera sounds (operation sounds, shutter sound, and warning sounds) and mute sound during playback. BEEP SOUND TYPE 1/2/3 Selects the operating sound and volume of the camera buttons (except the shutter button). VOLUME OFF (No Sound)/ LOW/HIGH SHUTTER SOUND SOUND TYPE 1/2/3 Selects the type and volume of the shutter sound. VOLUME OFF (No Sound)/ LOW/HIGH 8 OFF (No Sound)/ LOW/HIGH — Selects the warning sound volume. q VOLUME OFF (No Sound) or 5 levels of volume — Selects the image playback volume. *1 Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback. *2 Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television. Resetting the file names of pictures [FILE NAME] s (Settings 2) X FILE NAME Month: 1 to C (A=October, B=November, C=December) Day: 01 to 31 Pmdd Folder name Folder name File name DCIM 100OLYMP 999OLYMP Pmdd0001.jpg Pmdd9999.jpg Automatic numbering Automatic numbering Submenu 2 Application RESET This resets the sequential number for the folder name and file name whenever a new card is inserted.*1 This is useful when grouping images on separate cards. AUTO Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001.
Page: 47
47 EN For information on using the menus, see “Using the Menu” (p. 4). Adjusting the CCD and the image processing function [PIXEL MAPPING] s (Settings 2) X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the A button when [START] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. Adjusting the brightness of the monitor [s] s (Settings 2) X s To adjust the monitor brightness 1 Use FG to adjust the brightness while viewing the screen, and then press the A button. MENU OK SET BACK s ● Setting the date and time [X] t (Settings 3) X X “Setting the date, time and time zone” (p. 14) To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. 02 26 12 30 : . . 2010 MENU OK SET CANCEL X Y M D TIME Y/M/D Y/M/D Date order
Page: 48
48 EN Choosing home and alternate time zones [WORLD TIME] t (Settings 3) X WORLD TIME You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been set using [X]. Submenu 2 Submenu 3 Application HOME/ALTERNATE x The time in the home time zone (the time zone selected for x in submenu 2). y The time in the travel destination time zone (the time zone selected for y in submenu 2). x*1 — Select the home time zone (x). y*1, 2 — Select the travel destination time zone (y). *1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on. *2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (y). Playing back images on a TV [TV OUT] t (Settings 3) X TV OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Submenu 3 Application VIDEO OUT NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. HDMI OUT 480p/576p 720p 1080i Set the playback format. HDMI CONTROL OFF Operate with the camera. ON Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). ●
Page: 49
49 EN For information on using the menus, see “Using the Menu” (p. 4). 2 Connect the TV and camera. Connect to the TV video input jack (yellow) and audio input jack (white). Multi-connector AV cable (supplied) Connection via HDMI cable 1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/ [1080i]). 2 Connect the TV and camera. When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input setting of the TV, the signal format is changed first to 720p and then to 480p/576p. For details on changing the input setting of the TV, refer to the TV’s instruction manual. When the camera is connected to the computer or other device via USB cable, do not connect the HDMI cable to the camera. Connect to the HDMI connector on the TV. HDMI mini connector HDMI cable (type C) (commercially available) Open the battery/card/ connector cover in the direction of the arrow. 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Turn on the camera, and use HI to select the image for playback. Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV’s settings, the displayed images and information may become cropped. ●
Page: 50
50 EN To operate images with the TV remote control 1 Set [HDMI CONTROL] to [ON], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 49) 3 First turn on the TV, and then turn on the camera. Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera. Saving battery power between shots [POWER SAVE] t (Settings 3) X POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. ON When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button. Displaying the current altitude/water depth (atmospheric/hydraulic pressure) [MANOMETER] (STYLUS TOUGH-8010/μ TOUGH-8010 only) t (Settings 3) X MANOMETER The readings may have a margin of error depending on meteorological conditions. Use the readings only for your reference. Submenu 2 Submenu 3 Application MANOMETER OFF Cancels the manometer display. ON Displays the current altitude/water depth (atmospheric/hydraulic pressure) in the shooting standby mode screen. (–10 m to 5,000 m) CALIBRATE Proceed to the setting screen. See below. m/ft m This displays in meters. ft This displays in feet. When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22.9 ft) is reached. ●

Question & answers

Have a question about the Olympus Stylus Tough 8010 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus Stylus Tough 8010. Please make sure that you describe your difficulty with the Olympus Stylus Tough 8010 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus Stylus Tough 8010

Name
Email
Reaction

View a manual of the Olympus Stylus Tough 8010 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: Stylus Tough 8010
  • Filetype: PDF
  • Available languages: English, Spanish