Olympus Stylus 9000 manual

User manual for the Olympus Stylus 9000 in English. This PDF manual has 78 pages.

Page: 1
DIGITAL CAMERA STYLUS-9000 / P-9000 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Instruction Manual 2 EN Step 5 Step 2 Step 4 Step 3 How to Use the Camera “Three Types of Setting Operations” (p. 3) Printing “Direct printing (PictBridge)” (p. 46) “Print Reservations (DPOF)” (p. 49) Shooting and Playing Back Images “Shooting, Viewing, and Erasing” (p. 15) Preparing the Camera “Preparing the Camera” (p. 10) Names of Parts ......................................6 Preparing the Camera .........................10 Shooting, Viewing, and Erasing.........15 Using Shooting Modes........................18 Using Shooting Functions..................20 Using Playback Features....................24 Menus for Shooting Functions...........26 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions...............................34 Menus for Other Camera Settings .....39 Printing.................................................46 Using OLYMPUS Master 2...................52 Usage Tips ...........................................54 Appendix ..............................................59 Index .....................................................73 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Contents Contents Step 1 Checking the contents of the box Digital camera Strap LI-50B Lithium Ion Battery LI-50C Battery Charger USB cable CB-USB6 AV cable CB-AVC3 OLYMPUS Master 2 CD-ROM microSD Attachment Other accessories not shown: Instruction Manual (this manual), warranty card Contents may vary depending on purchase location. Printed in China VN061201
Page: 2
DIGITAL CAMERA STYLUS-9000 / P-9000 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Instruction Manual 2 EN Step 5 Step 2 Step 4 Step 3 How to Use the Camera “Three Types of Setting Operations” (p. 3) Printing “Direct printing (PictBridge)” (p. 46) “Print Reservations (DPOF)” (p. 49) Shooting and Playing Back Images “Shooting, Viewing, and Erasing” (p. 15) Preparing the Camera “Preparing the Camera” (p. 10) Names of Parts ......................................6 Preparing the Camera .........................10 Shooting, Viewing, and Erasing.........15 Using Shooting Modes........................18 Using Shooting Functions..................20 Using Playback Features....................24 Menus for Shooting Functions...........26 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions...............................34 Menus for Other Camera Settings .....39 Printing.................................................46 Using OLYMPUS Master 2...................52 Usage Tips ...........................................54 Appendix ..............................................59 Index .....................................................73 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Contents Contents Step 1 Checking the contents of the box Digital camera Strap LI-50B Lithium Ion Battery LI-50C Battery Charger USB cable CB-USB6 AV cable CB-AVC3 OLYMPUS Master 2 CD-ROM microSD Attachment Other accessories not shown: Instruction Manual (this manual), warranty card Contents may vary depending on purchase location. Printed in China VN061201
Page: 3
3 EN 77 EN MEMO 1 Set the mode dial to a position other than A. The symbol in “Menu Settings” (p. 26 to 45) indicates available shooting modes. 2 Press the  button. This example describes how to set the [DIGITAL ZOOM]. MENU EXIT SET OK CAMERA MENU Shooting mode top menu 3 Use klmn to select the desired menu, and press the ! button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. ISO OFF OFF 1 2 CAMERA MENU SET OK AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT Submenu 1 ● Please read “Menu Settings” (p. 26 to 45) while referring to this page.  button Arrow pad ! button Buttons in use 4 Use kl to select the desired Submenu 1, and press the ! button. 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU SET OK BACK DIGITAL ZOOM OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press m to highlight the page tab, and then use kl to move the page tab. Press n to return to the Submenu 1. Some menus include submenus that appear by pressing the ! button. 5 Use kl to select the Submenu 2, and press the ! button. Once a setting is adjusted, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 26 to 45) 6 Press the  button to complete the setting. ● Three Types of Setting Operations E button Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. There may be unavailable menus depending on the other related settings or the selected  mode (p. 30). 1 2 ISO OFF ON CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 3 EN 4 EN Using the FUNC Menu (p. 23) Using the FUNC Menu (p. 23) Frequently used shooting menu functions can be set with less steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 15) Zoom lever (p. 20, p. 24) F button (exposure compensation) (p. 21) & button (macro) (p. 21) # button (ash) (p. 20) Y button (self-timer) (p. 22) q button (playback) (p. 16) g/E button (information display change/ menu guide/date and time check) (p. 3, p. 14, p. 22) o/ button (panorama/Shadow Adjustment Technology/multi window/erase) (p. 17, p. 23) ! button (p. 3, p. 23) Arrow pad ! button Buttons in use
Page: 4
3 EN 77 EN MEMO 1 Set the mode dial to a position other than A. The symbol in “Menu Settings” (p. 26 to 45) indicates available shooting modes. 2 Press the  button. This example describes how to set the [DIGITAL ZOOM]. MENU EXIT SET OK CAMERA MENU Shooting mode top menu 3 Use klmn to select the desired menu, and press the ! button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. ISO OFF OFF 1 2 CAMERA MENU SET OK AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT Submenu 1 ● Please read “Menu Settings” (p. 26 to 45) while referring to this page.  button Arrow pad ! button Buttons in use 4 Use kl to select the desired Submenu 1, and press the ! button. 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU SET OK BACK DIGITAL ZOOM OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press m to highlight the page tab, and then use kl to move the page tab. Press n to return to the Submenu 1. Some menus include submenus that appear by pressing the ! button. 5 Use kl to select the Submenu 2, and press the ! button. Once a setting is adjusted, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 26 to 45) 6 Press the  button to complete the setting. ● Three Types of Setting Operations E button Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. There may be unavailable menus depending on the other related settings or the selected  mode (p. 30). 1 2 ISO OFF ON CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 3 EN 4 EN Using the FUNC Menu (p. 23) Using the FUNC Menu (p. 23) Frequently used shooting menu functions can be set with less steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 15) Zoom lever (p. 20, p. 24) F button (exposure compensation) (p. 21) & button (macro) (p. 21) # button (ash) (p. 20) Y button (self-timer) (p. 22) q button (playback) (p. 16) g/E button (information display change/ menu guide/date and time check) (p. 3, p. 14, p. 22) o/ button (panorama/Shadow Adjustment Technology/multi window/erase) (p. 17, p. 23) ! button (p. 3, p. 23) Arrow pad ! button Buttons in use
Page: 5
5 EN 5 1 G SLIDESHOW ............... p.34 2 H PERFECT FIX ............. p.34 3 M BEAUTY FIX................ p.34 4 I EDIT Q (Resize) ................ p.35 P (Crop) .................... p.35 COLOR EDIT............... p.35 Menus for Playback, Editing, and Printing Functions When the mode dial is set to the q position, settings can be adjusted. MENU EXIT SET OK PLAYBACK MENU 1 2 3 4 5 6 7 8 9 Playback mode top menu CALENDAR................. p.36 INDEX.......................... p.36 5 J PLAYBACK MENU 0 (Protect) ............... p.36 y (Rotate)................... p.37 R (Add sound to still images) .................... p.37 6 K ERASE......................... p.37 7 L PRINT ORDER............ p.38 8 E SETUP* * Same as “Menus for Shooting Functions” 9 F SILENT MODE ............ p.45 1 A IMAGE QUALITY......... p.26 2 B CAMERA MENU WB............................... p.27 ISO .............................. p.27 DRIVE.......................... p.27 FINE ZOOM................. p.28 DIGITAL ZOOM ........... p.28 ESP/n....................... p.28 AF MODE .................... p.28 R(Sound recording) .... p.29 IMAGE STABILIZER (Still images)/ DIS MOVIE MODE (Movies) ................... p.29 SHADOW ADJ............. p.29 3 O SCENE MODE............. p.30 4 N PANORAMA................. p.31 5 D RESET......................... p.33 6 E SETUP MEMORY FORMAT/ FORMAT .................. p.39 BACKUP...................... p.39 W (Language)........ p.39 PW ON SETUP ........... p.40 MENU COLOR ............ p.40 SOUND SETTINGS..... p.41 REC VIEW................... p.41 FILE NAME.................. p.42 PIXEL MAPPING......... p.42 s (Monitor) ............... p.43 X (Date/time)............ p.43 DUALTIME................... p.43 VIDEO OUT................. p.44 POWER SAVE............. p.45 7 F SILENT MODE ............ p.45 Menu Index Menus for Shooting Functions When the mode dial is set to a shooting mode position (A K s b n), settings can be adjusted. MENU EXIT SET OK CAMERA MENU 5 1 2 3 7 6 4 Shooting mode top menu
Page: 6
6 EN Names of Parts 1 Self-timer lamp.............................p.22 2 Flash............................................p.20 3 Multi-connector ................p.44, 46, 52 4 Connector cover ..............p.44, 46, 52 5 Strap eyelet..................................p.10 Camera unit 1 2 3 4 5 8 7 6 9 6 Microphone............................p.29, 37 7 Lens.............................................p.59 8 Battery/card compartment cover ............................................... p.11, 55 9 Tripod socket .................................. —
Page: 7
7 EN 1 2 6 7 8 5 3 4 9 10 11 12 13 1 Shutter button ........................p.15, 54 2 n button .............................p.13 3 Zoom lever.............................p.20, 24 4 Card access lamp........................p.61 5 Speaker .......................................... — 6 Monitor.........................p.8, 15, 43, 54 7 m button..............................p.3, 5 8 DISP./E button (information display change/ menu guide/date and time check) ...........................................p.3, 14, 22 9 Mode dial .................p.3, 5, 15, 16, 18 10 q button (playback)...................p.16 11  button (OK/FUNC)..............p.3, 23 12 Arrow pad ............................p.3, 4, 13 F button (exposure compensation)........p.21 & button (macro)....................p.21 Y button (self-timer) ...............p.22 # button (flash).......................p.20 13 o/D button (panorama/ Shadow Adjustment Technology/ multi window/erase)...............p.17, 23
Page: 8
8 EN Monitor Shooting mode display 12M +2.0 1/30 F3.2 P 4 IN ISO 1600 NORM 1 8 10 11 9 13 15 16 17 12 14 23 22 21 20 19 18 2 5 4 7 6 3 +2.0 IN 00:34 VGA 15 1 10 11 9 13 12 14 17 23 20 19 18 2 5 4 7 3 6 Still image Movie 1 Shooting mode.......................p.18, 19 2 Flash mode..................................p.20 3 Silent mode..................................p.45 4 Image stabilization (still images)/ Digital image stabilization (movies) .....................................................p.29 5 Macro/super macro......................p.21 6 Shadow Adjustment Technology...p.29 7 Battery check.........................p.10, 55 8 Flash standby/camera shake warning/ flash charge .................................p.54 9 AF target mark.............................p.15 10 Sound record ...................p.19, 29, 37 11 Dual time......................................p.43 12 Number of storable still pictures/ remaining recording time .........................................p.15, 19, 61 13 Current memory...........................p.60 14 Self-timer .....................................p.22 15 Aperture value .............................p.15 16 Shutter speed ..............................p.15 17 Exposure compensation ..............p.21 18 Compression/Frame rate.............p.26 19 Image size ...................................p.26 20 Metering.......................................p.28 21 Drive ............................................p.27 22 ISO...............................................p.27 23 White balance..............................p.27
Page: 9
9 EN Playback mode display 12M 2009.08.26 12:30 4 +2.0 F3.2 10 IN x 100-0004 NORM 1/1000 ISO 1600 2 9 10 8 6 7 11 3 4 5 1 15 16 12 13 14 2009.08.26 12:30 100-0004 00:14 /00:34 IN VGA 15 10 15 8 9 11 3 4 5 1 12 13 Still image Movie 1 Silent mode..................................p.45 2 Print reservation/ number of prints...................p.49/p.48 3 Sound record .............p.19, 29, 37, 58 4 Protect .........................................p.36 5 Battery check.........................p.10, 55 6 Aperture value .............................p.15 7 Exposure compensation ..............p.21 8 White balance..............................p.27 9 Image size ...................................p.26 10 File number..................................p.42 11 Frame number Elapsed time/total recording time .....................................................p.17 12 Current memory...........................p.60 13 Compression/Frame rate.............p.26 14 ISO...............................................p.27 15 Date and time ........................p.13, 43 16 Shutter speed ..............................p.15
Page: 10
10 EN Preparing the Camera Battery comes partially charged. Before use, be sure to charge the battery until the charging indicator goes off (for approx. 2 hours). If the charge indicator does not light or it blinks, the battery may not be inserted correctly or the battery or the charger may be broken. For details on the battery and the charger, see “Battery and charger” (p. 59). When to charge the battery Charge the battery when the error message shown below appears. BATTERY EMPTY Monitor top right Error message Flashes in red Attaching the camera strap Pull the strap tight so that it does not come loose. Charging the battery The included battery charger (AC cable type or plug-in type) differs depending on the region where you purchased the camera. If you received a plug-in type battery charger, plug it directly into an AC outlet. Example: AC cable type battery charger AC outlet AC cable Lithium ion battery Battery charger Charging indicator Lights: Charging Off: Charged
Page: 11
11 EN Sliding the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Be sure to turn off the camera when you open or close the battery/card compartment cover. When using the camera, be sure to close the battery/card compartment cover. 3 Insert the card straight in until it clicks into place. Do not touch the contact area on the card. 4 This camera allows the user to take pictures using the internal memory even when no xD-Picture Card (sold separately) is inserted. “Using an xD-Picture Card” (p. 60) “Number of storable pictures (still pictures)/ continuous recording length (movies) in the internal memory and xD-Picture card” (p. 61) Notch Index area Notch Index area Loading the battery and the xD-Picture Card™ (sold separately) into the camera Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. 1 2 The battery has front side and back side. Insert the battery in the correct direction as illustrated. If the battery is not inserted correctly, the camera does not operate. Insert the battery while sliding the battery lock knob in the direction of the arrow. Battery/card compartment cover Battery/card compartment cover Battery lock knob Battery lock knob
Page: 12
12 EN To remove the xD-Picture Card 1 2 Press in the card until it clicks and comes out slightly, and then grasp the card to pull it out. Using a microSD card/ microSDHC card (sold separately) microSD card/microSDHC card (hereinafter referred to as “microSD card”) is also compatible with this camera by using the microSD Attachment. “Using a microSD Attachment” (p. 62) 1 Insert the microSD card into the Attachment. Insert the card to the end. 2 Insert the microSD Attachment into the camera. Notch To remove the microSD card Pull the microSD card straight out. Do not touch the contact area on the microSD Attachment and microSD card.
Page: 13
13 EN Arrow pad and operation guide The symbols 1243, displayed on various setting and movie playback screens indicate that arrow pad are used. 2009.08.26 2009.08.26 12:30 12:30 100-0004 100-0004 00:14 /00:34 00:14 /00:34 IN / 2008 08 26 12 30 OK X Y M D TIME MENU CANCEL SET Y Y M M D D 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 EXPOSURE COMP. Arrow pad 4 2 1 3 Operation guides displayed at the bottom of the screen indicate that the m button,  button, zoom lever, or D button is used. 1 4 2 5 3 6 IN OK D MENU BACK GO SEL. IMAGE T W SET OK MENU EXIT SET OK CAMERA MENU Operation guide Setting the date and time The date and time set here are saved to image file names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. X Y M Y M D D TIME ---- -- -- -- -- MENU CANCEL Date and time setting screen 2 Use kl to select the year for [Y]. 2009 -- -- -- -- X Y M Y M D D TIME MENU CANCEL 3 Press n to save the setting for [Y]. 2009 -- -- -- -- X Y M Y M D D TIME MENU CANCEL ●
Page: 14
14 EN 4 As in steps 2 and 3, use klmn and the  button to set [M] (month), [D] (day), and [TIME] (hours and minutes), and [Y/M/D] (date order). For precise time setting, press the  button as the time signal strikes 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 43) To check the date and time Press the g button while the camera is turned off. The current time is displayed for approx. 3 seconds. Changing the display language The language for the menu and error messages displayed on the monitor is selectable. 1 Press the m button, and press klmn to select [E] (SETUP). MENU EXIT SET OK SETUP 2 Press the  button. 1 2 3 4 BACKUP NORMAL SETUP ENGLISH PW ON SETUP MENU COLOR MEMORY FORMAT MENU EXIT SET OK 3 Use kl to select [W] and press the  button. W FRANCAIS DEUTSCH ESPAÑOL ITALIANO ENGLISH ඾ུࢊ OK SET BACK MENU 4 Use klmn to select your language and press the  button. 5 Press the m button.
Page: 15
15 EN Shooting, Viewing, and Erasing 3 Hold the camera, and compose the shot. 1/400 F3.5 P Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash with your fingers, etc. 4 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. 1/400 F3.2 P AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 56) ● ● Shooting with optimum aperture value and shutter speed (K mode) In this mode, automatic camera shooting can be used while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, and so on when needed. 1 Set the mode dial to K. 2 Press the n button to turn on the camera. 12M P 4 IN NORM Monitor (standby mode screen) Number of storable still pictures (p. 61) Press the n button again to turn off the camera.
Page: 16
16 EN 5 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Image review screen Press fully P 1/400 F3.2 To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button again or press the shutter button halfway down. To shoot movies “Shooting movies (A mode)” (p. 19) Viewing images 1 Set the mode dial to q. 1 IN 12M 2009.08.26 12:30 100-0001 NORM Playback image Frame number 2 Use klmn to select an image. Displays 10 frames before the current image Displays next image Displays previous image Displays 10 frames after the current image The display size of the images can be changed. “Index view, calendar view, and close-up view” (p. 24)
Page: 17
17 EN To play back movies Select a movie, and press the  button. 2009.08.26 2009.08.26 12:30 12:30 100-0004 100-0004 4 4 IN MOVIE PLAY OK Movie Operations during movie playback Volume: During playback, press kl. Fast-forward/rewind: Select with mn. Each time a button is pressed, the playback speed cycles through 2x, 20x, and standard (1x) speed in the direction of the pressed button. Pause: Press the  button. 2009.08.26 2009.08.26 12:30 12:30 100-0004 100-0004 00:12 /00:34 00:12 /00:34 IN During playback Elapsed time/ Total recording time First (last) frame/frame advance: During pause, press k to display the first frame, and press l to display the last frame. Playback is reversed while m is pressed, playback occurs normally while n is pressed. Press the  button to resume playback. 2009.08.26 2009.08.26 12:30 12:30 100-0004 100-0004 00:14 /00:34 00:14 /00:34 IN / During pause To stop movie playback Press the m button. Erasing images during playback (Single image erase) 1 Press the D button when the playback image to be erased is displayed. ERASE ERASE OK IN NO NO YES SET CANCEL MENU 2 Press k to select [YES], and press the  button. [K ERASE] (p. 37)
Page: 18
18 EN Enhancing skin tone and texture (b mode) The camera finds a person’s face and gives the skin a smooth, translucent look for taking the picture. 1 Set the mode dial to b. 12M 12M 4 4 IN NORM NORM b mode indicator 2 Point the camera toward the subject. Check the frame appearing around the face detected by the camera, and then press the shutter button to take the picture. The unedited image and edited image are both saved. If the image cannot be retouched, only the unedited image is saved. For some subjects, the frame may not appear, may take some time to appear, or the editing may not be effective. The [IMAGE SIZE] of the retouched image is limited to [J] or lower. ● ● This section describes the available shooting modes. Depending on the mode, some settings can be changed. For details on the functions that can be adjusted, see “Menus for Shooting Functions” on page 26. Using the best mode for the shooting scene (s mode) 1 Set the mode dial to s. PORTRAIT SET OK MENU EXIT An explanation of the selected mode is displayed while the E button is pressed and held. 2 Use kl to select the best shooting mode for the scene, and press the  button. 12M 4 IN NORM Icon indicating the scene mode that is set To change to another scene mode, use the menu. [O SCENE MODE] (p. 30) ● Using Shooting Modes
Page: 19
19 EN Shooting with automatic settings (A mode) The camera will automatically select the optimal shooting mode for the scene. This is a fully automatic mode that allows you to take a picture suited to the scene by simply pressing the shutter button. Settings in the shooting function menu are not available in A mode. 1 Set the mode dial to A. 12M 4 IN NORM iAUTO The indicator changes to the icon for the scene mode selected by the camera. Press the shutter button halfway down or press the g button to check which shooting mode the camera has automatically selected. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, P mode will be selected. ● Shooting movies (n mode) Audio is recorded with the movie. 1 Set the mode dial to n. 00:35 00:35 QVGA QVGA 15 15 IN A mode indicator To zoom while shooting a movie The optical zoom is not available while shooting a movie. Use [DIGITAL ZOOM] (p. 28). To shoot a movie with digital image stabilization [DIS MOVIE MODE] (p. 29) 2 Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording. Press halfway Press fully 00:34 00:34 REC REC Lights red during shooting Remaining recording time (p. 61) 3 Gently press the shutter button all the way down to stop recording.
Page: 20
20 EN The zoom bar appearance identifies the status of the fine zoom/digital zoom. Fine zoom range Digital zoom range When using optical zoom When using fine zoom When using digital zoom Optical zoom range Using the flash The flash functions can be selected to best match the shooting conditions and render the desired image. 1 Press the # button. P OK OK AUTO SET SET FLASH AUTO FLASH AUTO AUTO ! # $ In addition to the wide variety of shooting modes, the camera has functions that broaden the expressive range and shooting options available to the photographer. Using the optical zoom Pressing the zoom lever adjusts the shooting range. Press toward W (Wide) Press toward T (Telephoto) 12M P 4 IN NORM 12M P 4 IN NORM W T W T Zoom bar Optical zoom: 10×, Digital zoom: 5×. Use of [IMAGE STABILIZER] (Still images)/ [DIS MOVIE MODE] (Movies) (p. 29) is recommended when shooting with the telephoto zoom. To take larger images without reducing image quality [FINE ZOOM] (p. 28) To take larger images [DIGITAL ZOOM] (p. 28) Using Shooting Functions
Page: 21
21 EN 2 Use mn to select the setting option, and press the  button to set. Item Description FLASH AUTO The flash fires automatically in low-light or backlight conditions. REDEYE This emits pre-flashes to reduce the occurrence of red eye in your photos. FILL IN The flash fires regardless of the available light. FLASH OFF The flash does not fire. Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (except for A) can be adjusted brighter or darker to obtain a desired shot. 1 Press the F button. 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 EXPOSURE COMP. Exposure compensation value 2 Use klmn to select the desired brightness image, and press the  button. Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Press the & button. P OK OK SET OFF OFF OFF OFF % & 2 Use mn to select the setting option, and press the  button to set. Item Description OFF Macro mode is deactivated. MACRO This enables shooting as close as 10 cm/3.9 in.*1 (90 cm/35.4 in.*2 ) to the subject. SUPER MACRO*3 This enables shooting as close as 1 cm/0.4 in. to the subject. Subjects at 50 cm/19.7 in. or farther cannot be brought into focus. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 20) and zoom (p. 20) cannot be set when [%] is selected.
Page: 22
22 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a time delay. 1 Press the Y button. OFF P OK OK 12M NORM SET SELFTIMER OFF ON Y Y Y 2 Use kl to select the setting option, and press the  button to set. Item Description OFF This cancels the self-timer. ON The self-timer lamp turns on for approx. 10 seconds, and then blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the Y button again. Changing the shooting information display The display of the screen information can be changed to best match the situation, such as for the need of clear view of the screen or for making a precise composition by using the grid display. 1 Press the g button. The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 8) 12M +2.0 P 4 IN ISO 1600 NORM 12M +2.0 P 4 IN ISO 1600 NORM 12M +2.0 P 4 IN ISO 1600 NORM Normal No information Histogram Grid Reading a histogram If the peak fills too much of the frame, the image will appear mostly white. If the peak fills too much of the frame, the image will appear mostly black. The green section shows the luminance distribution in the center area of the monitor. ●
Page: 23
23 EN Using the FUNC menu The FUNC menu provides the following menu functions that can be quickly called and set. [WB] (p. 27) • [ESP/n] (p. 28) • [ISO] (p. 27) • [A IMAGE QUALITY] (p. 26) • [DRIVE] (p. 27) • 1 Press the  button. n 12M ESP ISO AUTO WB AUTO ESP ESP NORM P 2 Use kl to select the menu function and mn to select the setting option, and then press the  button to set. Quickly calling and using shooting functions The following menu functions can be quickly called and used. [PANORAMA] (p. 31) • [MULTI WINDOW] (p. 23) • [SHADOW ADJ] (p. 29) • 1 Press the o/D button. PANORAMA 2 Use mn to select the menu function, and press the  button to set. To use the effects preview screen (Multi window) Selecting an option from [ZOOM], [EXPOSURE COMP.], [WB] or [ESP/n] shows 4 preview images that reflect the adjusted values of the selected shooting function. Use klmn to select the desired image, and press the  button. Brightening the monitor (Backlight boost) Pressing and holding the o/D button brightens the monitor. The monitor returns to the original brightness if no operation is performed for 10 seconds.
Page: 24
24 EN Using Playback Features Index view, calendar view, and close-up view Index view and calendar view enable quick selection of a target image. Close-up view (up to 10x magnification) allows checking of image details. 1 Press toward W or T on the zoom lever. Index view Single-image view Close-up view 2009.08.26 4 IN 12:30 2009.08.26 12:30 10 x 4 IN 2009.08.26 12:30 4 IN 2009.08.26 12:30 4 IN 4 IN 12M 2009.08.26 12:30 100-0004 NORM 8 8 26 26 27 27 28 28 29 29 30 30 31 31 1 1 SUN SUN MON MON TUE TUE WED WED THU THU FRI FRI SAT SAT 2009 2009 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 1 1 2 2 3 3 4 4 IN Calendar view To select an image in index view Use klmn to select an image, and press the  button to display the selected image in single-image view. To select images in calendar view Use klmn to select a date and press the  button or press toward T on the zoom lever to view the images taken on the selected date. To scroll an image in close-up view Use klmn to move the viewing area. Changing the image information display Shooting information displayed on the screen can be changed. 1 Press the g button. The displayed image information changes in the order shown below each time the button is pressed. 2009.08.26 12:30 4 100-0004 IN 12M NORM 12M 2009.08.26 12:30 4 100-0004 +2.0 F3.2 1/1000 IN ISO 400 NORM 12M 2009.08.26 12:30 +2.0 F3.2 4 IN NORM 1/1000 ISO 400 Normal Detailed Histogram No information “Reading a histogram” (p. 22) ●
Page: 25
25 EN Playing back panorama images Panorama images that were combined together using [COMBINE IN CAMERA 1] or [COMBINE IN CAMERA 2] can be scrolled for viewing. “Creating panoramic images [N PANORAMA]” (p. 31) 1 Select a panorama image during playback. “Viewing images” (p. 16) NORM NORM 2009.08.26 12:30 2009.08.26 12:30 2 2 100-0003 100-0003 2 Press the  button. Current viewing area To control panorama image playback Zoom in/Zoom out: Press toward W or T on the zoom lever. Playback direction: Press klmn to scroll in the direction of the pressed button. Pause: Press the  button. Restart scrolling: Press the  button. Stop playback: Press the m button.
Page: 26
26 EN Menus for Shooting Functions When the mode dial is set to a shooting mode position (A K s b A), settings can be adjusted. indicates positions of the mode dial at which the function can be set. The default settings of the function are highlighted in . Selecting the appropriate image quality for your application [A IMAGE QUALITY] A IMAGE QUALITY : A K s b A Still images Submenu 1 Submenu 2 Application IMAGE SIZE 12M (3968×2976) Suitable for printing pictures over A3 (11×17 in.). 5M (2560×1920) Suitable for printing pictures at A4 (8.5×11 in.). 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing pictures at A5 (5×7 in.). 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures on emails and web sites. 16:9 (1920×1080) Suitable for playing pictures on wide screen TV. COMPRESSION FINE Shooting at high quality. NORMAL Shooting at normal quality. Movies Submenu 1 Submenu 2 Application IMAGE SIZE VGA (640×480) / QVGA (320×240) Select the image quality based on the image size and frame rate. Higher frame rates provide smoother movies. FRAME RATE N 30fps*1 / O 15fps*1 *1 frames per second “Number of storable pictures (still pictures)/continuous recording length (movies) in the internal memory and xD-Picture Card” (p. 61)
Page: 27
27 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Adjusting to a natural color scheme [WB] B CAMERA MENU X WB : K s b A Submenu 2 Application AUTO The camera automatically adjusts the white balance according to the shooting scene. 5 For shooting outdoors under a clear sky 3 For shooting outdoors under a cloudy sky 1 For shooting under tungsten lighting w For shooting under daylight fluorescent lighting (household lighting, etc.) x For shooting under neutral fluorescent lighting (desk lamps, etc.) y For shooting under white fluorescent lighting (offices, etc.) Selecting the ISO sensitivity [ISO] B CAMERA MENU X ISO : K Abbreviation for the International Organization for Standardization. ISO standards specify the sensitivity for digital cameras and film, thus codes such as “ISO 100” are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under dimly lit conditions. However, high sensitivity introduces electrostatic noise into the resulting picture, which may give it a grainy appearance. Submenu 2 Application AUTO The camera automatically adjusts the sensitivity according to the shooting scene. HIGH ISO AUTO The camera uses a higher sensitivity compared to [AUTO] to minimize blur caused by a moving subject or by camera shake. 64/100/200/400/ 800/1600 The ISO (sensitivity) setting is fixed by manually selecting it. Shooting pictures sequentially while the shutter button is held down [DRIVE] B CAMERA MENU X DRIVE : K s Submenu 2 Application o One frame is shot each time the shutter button is pressed. j*1 Sequential shooting at the focus, brightness (exposure), and white balance that is locked in the first frame. W Sequential shooting at a higher speed than [j]. *1 The shooting speed varies depending on the settings for [A IMAGE QUALITY] (p. 26). When set to [j], [R] (Sound recording) (P. 29) is not available. When set to [W], flash is set fixed [$] (FLASH OFF) and [ISO] is fixed to [AUTO]. When set to [W], [IMAGE SIZE] is limited to [I] or lower. Moreover, [FINE ZOOM] (p. 28), [DIGITAL ZOOM] (p. 28), and [R] (Sound recording) (p. 29) are not available.
Page: 28
28 EN Shooting at higher magnifications than optical zoom without reducing the image quality [FINE ZOOM] B CAMERA MENU X FINE ZOOM : K s b Submenu 2 Application OFF Only optical zoom is used to zoom in for shooting. ON Optical zoom and image cropping are combined to zoom in for shooting (Approx. 62x (max.)). This function will not reduce the image quality since it dose not convert the data with fewer pixels into the data with larger pixels. When set to [ON], [IMAGE SIZE] is limited to [H] or lower. This function is not available when [DIGITAL ZOOM] is [ON]. This function is not available when [% SUPER MACRO] (p. 21) is selected. Shooting at higher magnifications than optical zoom [DIGITAL ZOOM] B CAMERA MENU X DIGITAL ZOOM : K s b A Submenu 2 Application OFF Only optical zoom is used to zoom in for shooting. ON Optical zoom and digital zoom are combined to zoom in for shooting (Approx. 50x (max.)). This function is not available when [FINE ZOOM] is [ON]. This function is not available when [% SUPER MACRO] (p. 21) is selected. Selecting the range for measuring the brightness [ESP/n] B CAMERA MENU X ESP/n : K s A Submenu 2 Application ESP Shoots to obtain a balanced brightness over the entire screen. (Meters the brightness at the center and surrounding areas of the screen separately.) n (spot) Shoots the subject at the center during backlighting. When set to [ESP], the center may appear dark when shooting against strong backlighting. Selecting the focusing area [AF MODE] B CAMERA MENU X AF MODE : K s Submenu 2 Application FACE DETECT*1 This is used for taking pictures of people. (The camera automatically detects a face and displays a frame on the monitor). Press the shutter button halfway, when the camera focuses on a face the AF target mark lights green. When the AF target mark lights orange, this indicates the camera has focused on something other than a face. iESP This enables you to compose the shot without worrying about the focusing position. The camera finds the subject to focus on and automatically adjusts the focus. SPOT The camera focuses on the subject within the AF target mark. *1 For some subjects, the frame may not appear or may take some time to appear.
Page: 29
29 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Recording sound when shooting still images [R] B CAMERA MENU X R : K s Submenu 2 Application OFF No sound is recorded. ON The camera automatically starts recording for approx. 4 seconds after taking the picture. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 6) at the source of the sound you want to record. Reducing the blur caused by the camera shake when shooting [IMAGE STABILIZER] (still images) / [DIS MOVIE MODE] (movies) B CAMERA MENU X IMAGE STABILIZER / DIS MOVIE MODE : K s b A Submenu 2 Application OFF The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. ON The image stabilizer is activated. The camera’s default settings are [IMAGE STABILIZER] (still images) to [ON] and [DIS MOVIE MODE] (movies) to [OFF]. While [IMAGE STABILIZER] (still images) is set to [ON], noises may occur from the inside of the camera if the shutter button is pressed. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking still shots or taking pictures at night, the stabilizer may not be as effective. When shooting while the [DIS MOVIE MODE] (movie) is set to [ON], the image will be enlarged somewhat before saving. Brightening the subject against backlight [SHADOW ADJ] B CAMERA MENU X SHADOW ADJ : K s b A Submenu 2 Application OFF Shoots without using [SHADOW ADJ]. ON The camera finds a person’s face that has been darkened by backlight and makes it appear brighter for taking the picture. (Point the camera toward the subject. Check the frame that appears around the face detected by the camera, and then press the shutter button to take the picture.) For some subjects, the frame may not appear or may take some time to appear. When set to [ON], [ESP/n] (p. 28) is automatically fixed to [ESP], and [AF MODE] (p. 28) is automatically fixed to [FACE DETECT].
Page: 30
30 EN Selecting a scene mode according to the shooting situation [O SCENE MODE] O SCENE MODE : s In s mode, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, settings may not be changed in some modes. Submenu 1 Application BPORTRAIT/ FLANDSCAPE/ GNIGHT SCENE*1 / MNIGHT+PORTRAIT*1 / CSPORT/ NINDOOR/ WCANDLE*1 / RSELF PORTAIT/ SSUNSET*1 / XFIREWORKS*1 / VCUISINE/dDOCUMENTS/ qBEACH & SNOW/ YPRE-CAPTURE MOVIE The camera takes a picture in the mode for the shooting scene. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which no other pictures can be taken. To shoot with the selected mode “Using the best mode for the shooting scene (s mode)” (p. 18) Capturing the perfect moment when shooting ([YPRE-CAPTURE MOVIE] mode) 1 Use kl to select [YPRE-CAPTURE MOVIE], and then press the  button to set. This function is ready for shooting immediately after setting this option. 2 Press the shutter button to start movie shooting. A 7-second movie, including 2-second movie immediately before pressing the shutter button, is taken. The optical zoom and auto focus function are available during movie recording. Sound is not recorded. AF target mark does not appear on the monitor. Select [IMAGE SIZE] from [VGA] or [QVGA], and select [FRAME RATE] from [N30fps] or [O15fps]. ● ● ●
Page: 31
31 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Creating panoramic images [N PANORAMA] N PANORAMA : K s Submenu 1 Application COMBINE IN CAMERA 1*1*2 Three frames are taken and combined by the camera. The user only composes the shots so that the target marks and pointers overlap, and the camera automatically releases the shutter. The shooting functions are already preset to the optimum settings for panoramic shooting. COMBINE IN CAMERA 2*1*2 Three frames are taken and combined by the camera. The user composes the shots using the guide frame and manually releases the shutter. COMBINE IN PC The frames that were taken are combined into a panorama image using the OLYMPUS Master 2 software from the provided CD- ROM. Pictures are taken in the last [ISO] or [O SCENE MODE] settings (except for some scene modes). *1 Not available in s mode (p. 18). *2 The [A IMAGE QUALITY] (p. 26) setting cannot be changed. The focus, exposure (p. 21), zoom position (p. 20), and [WB] (p. 27) are locked at the first frame. The flash (p. 20) is fixed to $ (FLASH OFF) mode. Panorama images can be edited using [SHADOW ADJ] (p. 29), [COLOR EDIT] (p. 35) only. “Playing back panorama images” (p. 25) Taking pictures with [COMBINE IN CAMERA 1] 1 Press the shutter button to take the first frame. 2 Move the camera slightly in the direction of the second frame. SAVE OK MENU CANCEL Target mark Pointer Screen when combining images from left to right 3 Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap. The camera releases the shutter automatically. SAVE OK MENU CANCEL To combine only two pictures, press the  button before taking the third frame. 4 Take the third frame in the same way as Step 3. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To cancel making panoramic picture during shooting, press the m button. When the shutter does not automatically release, try [COMBINE IN CAMERA 2] or [COMBINE IN PC]. ● ●
Page: 32
32 EN Taking pictures with [COMBINE IN CAMERA 2] 1 Use mn to select the direction that the frames are combined. MENU CANCEL Direction for combining the next frame 2 Press the shutter button to take the first frame. A guide frame appears as a reference. 1st frame MENU CANCEL MENU CANCEL Guide frame Joint area 3 Compose the second shot so that the joint area overlaps the guide frame. Composition of the 2nd frame OK SAVE MENU CANCEL ● 4 Press the shutter button to take the second frame. To combine only two pictures, press the  button before taking the third frame. 5 Take the third frame in the same way as Steps 3 to 4. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To cancel making panoramic picture during shooting, press the m button. Taking pictures with [COMBINE IN PC] 1 Use klmn to select the direction that the frames are combined. 2 Press the shutter button to take the first frame, and then compose the second shot. Compose the shot using the guide frame so that the two adjacent frames overlap. 3 Repeat Step 2 until the number of required frames are taken, and then press the  button when finished. When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is possible for up to 10 frames. Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images. ● ●
Page: 33
33 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Restoring the shooting functions to the default settings [D RESET] D RESET : A K s b A Submenu 1 Application YES Restores the following menu functions to the default settings. Flash (p. 20) Exposure compensation (p. 21) Macro (p. 21) Self-timer (p. 22) [A IMAGE QUALITY] (p. 26) Menu functions in [B CAMERA MENU] (p. 27 to 29) • • • • • • NO The current settings are not changed.
Page: 34
34 EN Menus for Playback, Editing, and Printing Functions The default settings of the function are highlighted in . When the mode dial is set to the q position, settings can be adjusted. Playing back automatically [G SLIDESHOW] G SLIDESHOW Submenu 1 Submenu 2 Submenu 3 Application ALL/ STILL PICTURE/ MOVIE/ CALENDAR NORMAL*1 / FADER*1 /SLIDE*1 / ZOOM*1 /date*2 OFF/1/2 Selects the range of images for the slideshow, the type of transition effect ([TYPE]) used between images, and the background music ([BGM]). *1 Only when [STILL PICTURE] is selected in Submenu 1. *2 Only when [CALENDAR] is selected in Submenu 1. To start a slideshow After pressing the  button to make the [BGM] settings, the slideshow starts. To stop the slideshow, press the  button or the m button. [BGM] is not available when [F SILENT MODE] (p. 45) is set to [ON]. Retouching images [H PERFECT FIX] H PERFECT FIX Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1 Application ALL [SHADOW ADJ] and [REDEYE FIX] are applied together. SHADOW ADJ Only sections darkened by backlighting and dim lighting are brightened. REDEYE FIX Eyes that are reddened by the flash are corrected. 1 Use kl to select a correction method and press the  button. 2 Use mn to select an image for retouching, and press the  button. The retouched image is saved as a separate image. ● Retouching the skin and eyes [M BEAUTY FIX] M BEAUTY FIX Depending on the picture, the editing may not be effective. Submenu 1 Submenu 2 Application ALL ― [CLEAR SKIN], [SPARKLE EYE] and [DRAMATIC EYE] are applied together. CLEAR SKIN SOFT/AVG/ HARD Makes skin look smooth and translucent. Select the desired effect from among the 3 levels. SPARKLE EYE ― Enhances the contrast of the eyes. DRAMATIC EYE ― Enlarges the subject’s eyes. 1 Use kl to select a correction method, and press the  button. 2 Use mn to select an image for retouching, and press the  button. The retouched image is saved as a separate image. ●
Page: 35
35 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). When [CLEAR SKIN] is selected Use kl to select the retouching level, and press the  button. CLEAR SKIN SOFT AVG HARD MENU BACK SET OK Changing the image size [Q] I EDIT X Q Submenu 2 Application C 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications. E 320 × 240 1 Use mn to select an image. 2 Use kl to select an image size and press the  button. The image with the selected size is saved as a separate image. Cropping a picture [P] I EDIT X P 1 Use mn to select an image, and press the  button. 2 Use the zoom lever to select the size of the cropping frame, and use klmn to move the frame. T W SET OK Cropping frame 3 Press the  button. The edited image is saved as a separate image. ● ● Changing the color tone of image [COLOR EDIT] I EDIT X COLOR EDIT Submenu 2 Application Black & white This changes the image to black and white. Sepia This changes the image to a sepia tone. Saturation (hard) This increases the color saturation of the image. Saturation (soft) This slightly increases the color saturation of the image. Black & white COLOR EDIT Sepia Saturation (hard) Saturation (soft) 1 Use mn to select an image, and press the  button. 2 Use klmn to select the desired color, and press the  button. The image with the selected color is saved as a separate image. ●
Page: 36
36 EN Adding a calendar to an image [CALENDAR] I EDIT X CALENDAR OK CALENDAR SET 1 Use mn to select an image, and then press the  button. 2 Use mn to select a calendar, and use kl to select the image orientation, and press the  button. 3 Use kl to select the Year of the calendar, and then press n. 4 Use kl to select the Month of the calendar, and then press the  button. The edited image is saved as a separate image. ● Creating an index of 9 frames from a movie [INDEX] I EDIT X INDEX 1 Use mn to select a movie, and press the  button. INDEX SET OK MENU BACK This function extracts 9 frames from a movie and saves them as a new picture (INDEX) containing thumbnails of each frame. Protecting images [0] J PLAYBACK MENU X 0 Protected images cannot be erased by [ERASE] (p. 17), [SEL. IMAGE], or [ALL ERASE] (p. 37), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 39). Submenu 2 Application OFF Images can be erased. ON Images are protected so that they cannot be erased except by formatting of the internal memory/card. 1 Use mn to select an image. 2 Use kl to select [ON]. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the  button. ●
Page: 37
37 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Rotating images [y] J PLAYBACK MENU X y Submenu 2 Application U +90° The image is rotated 90° clockwise. V 0° The image is not rotated. t –90° The image is rotated 90° counter-clockwise. 1 Use mn to select an image. 2 Use kl to select the rotation direction. 3 If necessary, repeat Steps 1 and 2 to adjust settings for other images, and press the  button. The new picture orientation will be saved even after the power is turned off. Adding sound to still images [R] J PLAYBACK MENU X R Submenu 2 Application YES The camera adds (records) sound for approx. 4 seconds while playing back the image. This is useful for recording notes or comments about the image. NO No sound is recorded. 1 Use mn to select an image. 2 Aim the microphone towards the sound source. Microphone 3 Use kl to select [YES], and press the  button. Recording starts. ● Erasing images [K ERASE] K ERASE Check each picture before erasing to avoid erasing any important pictures you may want to keep. Submenu 1 Application SEL. IMAGE Images are individually selected and erased. ALL ERASE All images in the internal memory or card are erased. When erasing pictures in the internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. To individually select and erase images [SEL. IMAGE] 1 Use kl to select [SEL. IMAGE], and press the  button. 2 Use klmn to select the image to be erased, and press the  button to add a R mark to the image. 1 4 2 5 3 6 IN OK MENU BACK SEL. IMAGE D GO R mark 3 Repeat Step 2 to select the images to be erased, and then press the D button to erase the selected images. 4 Use kl to select [YES], and press the  button. The images with a R mark are erased. To erase all images [ALL ERASE] 1 Use kl to select [ALL ERASE], and press the  button. 2 Use kl to select [YES], and press the  button. ●
Page: 38
38 EN Saving print settings to the image data [L PRINT ORDER] L PRINT ORDER “Print Reservations (DPOF)” (p. 49) Print reservation can only be set for still images that are recorded to the card.
Page: 39
39 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Menus for Other Camera Settings The default settings of the function are highlighted in . Erasing data completely [MEMORY FORMAT]/[FORMAT] E SETUP X MEMORY FORMAT/FORMAT Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2 Application YES Completely erases the image data in the internal memory*1 or card (including protected images). NO Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [BACKUP] E SETUP X BACKUP Submenu 2 Application YES Backs up image data in the internal memory to the card. NO Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup, or use an AC adapter. Changing the display language [W] E SETUP X W “Changing the display language” (p. 14) Submenu 2 Application Languages*1 The language for the menus and error messages displayed on the monitor is selected. *1 The available languages vary depending on the country and/or region where the camera was purchased.
Page: 40
40 EN Setting the startup display screen and sound when the camera is turned on [PW ON SETUP] E SETUP X PW ON SETUP Submenu 2 Submenu 3 Application SCREEN OFF No image is displayed. 1 A preset image*1 is displayed. 2 A still image stored in the internal memory or card is registered for display. (This option leads to the setup screen.) VOLUME*2 *3 OFF (No sound)/ LOW/HIGH The volume of the startup sound is selected. *1 This image cannot be changed. *2 When [SCREEN] is set to [OFF], this setting is not available. *3 When [F SILENT MODE] (p. 45) is set to [ON], this setting is not available. To register a startup image 1 Select [2] in Submenu 3 for [SCREEN], and press the  button. 2 Use mn to select the image to be registered, and press the  button. Selecting the menu screen color and background [MENU COLOR] E SETUP X MENU COLOR Submenu 2 Application NORMAL/COLOR 1/ COLOR 2/COLOR 3 Selects the menu screen color or background image according to your preference.
Page: 41
41 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Viewing the image immediately after shooting [REC VIEW] E SETUP X REC VIEW Submenu 2 Application OFF The image being recorded is not displayed. This allows the user to prepare for the next shot while following the subject in the monitor after shooting. ON The image being recorded is displayed. This allows the user to briefly check the image that was just taken. Even when set to [ON], you can resume shooting while the image is being displayed. Selecting the camera sound and its volume [SOUND SETTINGS] E SETUP X SOUND SETTINGS Submenu 2 Submenu 3 Submenu 4 Application BEEP SOUND TYPE 1/2 Selects the operating sound and volume of the camera buttons (except the shutter button). VOLUME OFF (No sound)/ LOW/HIGH SHUTTER SOUND SOUND TYPE 1/2/3 Selects the type and volume of the shutter sound. VOLUME OFF (No sound)/ LOW/HIGH 8 OFF (No sound)/ LOW/HIGH — Adjusts the warning sound volume. q VOLUME OFF (No sound)/ LOW/HIGH — Adjusts the image playback volume. To turn off all sounds at once, adjust the setting from [F SILENT MODE] (p. 45).
Page: 42
42 EN Resetting the file name numbers of pictures [FILE NAME] E SETUP X FILE NAME Month: 1 to C (A=October, B=November, C=December) Day: 01 to 31 Pmdd Folder name Folder name File name DCIM 100OLYMP 999OLYMP Pmdd0001.jpg Pmdd9999.jpg Automatic numbering Automatic numbering Submenu 2 Application RESET This resets the sequential number for the folder name and file name whenever a new card is inserted.*1 This is useful when grouping images on separate cards. AUTO Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001. Adjusting the CCD and the image processing function [PIXEL MAPPING] E SETUP X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the  button when [START] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. ●
Page: 43
43 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Adjusting the brightness of the monitor [s] E SETUP X s To adjust the monitor brightness 1 Use kl to adjust the brightness while viewing the screen, and then press the  button. s SET OK MENU BACK Setting the date and time [X] E SETUP X X “Setting the date and time” (p. 13) To select the date and time display order 1 Press n after setting “Minute”, and use kl to select the date display order. 2009 08 26 12 30 OK X Y M D TIME MENU CANCEL SET Y Y M M D D Date order Setting the date and time for another time zone [DUALTIME] E SETUP X DUALTIME By setting [DUALTIME] to [ON] and setting the date and time, the set date and time is reflected in the image file names, date prints and so on. Submenu 2 Submenu 3 Application OFF — Switches to the date and time set in [X] (Date/ time). ON (Proceeds to the setting screen*1 .) Switches to the date and time that were set in [DUALTIME] when using the camera in another time zone. *1 The setting procedure is identical to that in “Setting the date and time” (p. 13). The date display order is the same as that set with [X].
Page: 44
44 EN Selecting the video signal system to match your TV [VIDEO OUT] E SETUP X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on PAL Connecting the camera to a TV in European countries, China, and so on The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Connect the TV and camera. Connect to the TV video input jack (yellow) and audio input jack (white). Multi-connector AV cable (supplied) Connector cover 2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Set the mode dial to q, and use klmn to select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped.
Page: 45
45 EN Adjust the settings for the functions while referring to “Using the Menu” (p. 3). Saving battery power between shots [POWER SAVE] E SETUP X POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. ON When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button or turn the mode dial. Turning off the camera sounds [F SILENT MODE] F SILENT MODE Submenu 1 Application OFF Activates the [SOUND SETTINGS] setting. ON The electronic sounds (operating sound, shutter sound, warning sound) and playback sounds are muted. [SOUND SETTINGS] (p. 41)
Page: 46
46 EN Printing 2 Turn on the printer, and then connect the printer and camera. Connector cover USB cable (supplied) Multi-connector OK PC/CUSTOM PRINT EASY PRINT START n button 3 Press n to start printing. 4 To print another image, use mn to select an image, and press the  button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. PRINT EXIT OK Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge- compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [EASY PRINT] 1 Display the image to be printed on the monitor. “Viewing images” (p. 16) Printing can also be started when the camera is turned off. After performing Step 2, use kl to select [EASY PRINT], press the  button. Use mn to select an image, and press the  button.
Page: 47
47 EN Changing the printer’s settings for printing [CUSTOM PRINT] 1 Follow Steps 1 and 2 for [EASY PRINT] (p. 46), then press the  button. EASY PRINT USB SET OK EXIT CUSTOM PRINT PC 2 Use kl to select [CUSTOM PRINT], and press the  button. 3 Use kl to select the print mode, and press the  button. Submenu 2 Application PRINT This prints the image selected in Step 6. ALL PRINT This prints all images stored in the internal memory or card. MULTI PRINT This prints one image in a multiple layout format. ALL INDEX This prints an index of all images stored in the internal memory or card. PRINT ORDER*1 This prints images based on the print reservation data on the card. *1 [PRINT ORDER] is available only when print reservations have been made. “Print Reservations (DPOF)” (p. 49) 4 Use kl to select [SIZE] (Submenu 3), and press n. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer’s standard. STANDARD STANDARD PRINTPAPER SET OK MENU BACK SIZE BORDERLESS 5 Use kl to select the [BORDERLESS] or [PICS/SHEET] settings, and press the  button. Submenu 4 Application OFF/ON*1 The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). (The number of images per sheet varies depending on the printer.) The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer’s standard settings. 100-0004 100-0004 OK 4 4 IN SINGLEPRINT MORE PRINT
Page: 48
48 EN 6 Use mn to select an image. 7 Press k to make a [SINGLE PRINT] reservation for the current image. Press l if you wish to adjust detailed printer settings for the current image. To adjust detailed printer settings 1 Use klmn to adjust the detailed printer settings, and press the  button. 1 PRINT INFO SET OK DATE FILE NAME <x P WITHOUT WITHOUT EXIT MENU Submenu 5 Submenu 6 Application <× 0 to 10 This selects the number of prints. DATE WITH/ WITHOUT Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. FILE NAME WITH/ WITHOUT Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. P (Proceeds to the setting screen.) This selects a portion of the image for printing. To crop an image [P] 1 Use the zoom lever to select the size of the cropping frame, use klmn to move the frame, and then press the  button. Cropping frame T W SET OK 2 Use kl to select [OK], and press the  button. P SET OK MENU BACK CANCEL OK 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [SINGLEPRINT]. 9 Press the  button. PRINT SET OK MENU BACK PRINT CANCEL
Page: 49
49 EN 10Use kl to select [PRINT], and press the  button. Printing starts. When [OPTION SET] is selected in [ALL PRINT] mode, [PRINT INFO] screen is displayed. When printing is finished, the [PRINT MODE SELECT] screen is displayed. ALL PRINT PRINT MODE SELECT SET OK ALL INDEX PRINT ORDER MULTI PRINT PRINT EXIT MENU To cancel printing 1 Press the  button while [TRANSFERRING] is displayed. 2 Use kl to select [CANCEL], then press the  button. PRINT SET OK CONTINUE CANCEL CANCEL OK TRANSFERRING 11Press the m button. 12When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer. ● ● ● Print Reservations (DPOF*1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Make changes using the original device. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. Single-frame print reservations [<] 1 Set the mode dial to q, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the  button. PRINT ORDER SET OK < U EXIT MENU
Page: 50
50 EN 3 Use kl to select [<], and press the  button. x 12M 2009.08.26 12:30 100-0004 4 0 NORM SET OK 4 Use mn to select the image for print reservation. Use kl to select the quantity. Press the  button. SET OK MENU BACK DATE TIME NO X 5 Use kl to select the [X] (date print) screen option, and press the  button. Submenu 2 Application NO This prints the image only. DATE This prints the image with the shooting date. TIME This prints the image with the shooting time. OK SET BACK MENU PRINT ORDER SET CANCEL 1 ( 1) 1 ( 1) 6 Use kl to select [SET], and press the  button. Reserving one print each of all images on the card [U] 1 Follow Steps 1 and 2 in [<] (p. 49). 2 Use kl to select [U], and press the  button. 3 Follow Steps 5 to 6 in [<]. Resetting all print reservation data 1 Set the mode dial to q, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the  button. 3 Select either [<] or [U], and press the  button. OK SET BACK MENU PRINT ORDER SETTING PRINT ORDERED RESET KEEP 4 Use kl to select [RESET], and press the  button.

Question & answers

Have a question about the Olympus Stylus 9000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus Stylus 9000. Please make sure that you describe your difficulty with the Olympus Stylus 9000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus Stylus 9000

Name
Email
Reaction

View a manual of the Olympus Stylus 9000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: Stylus 9000
  • Filetype: PDF
  • Available languages: English, Spanish