Stylus 760

Olympus Stylus 760 manual

Stylus 760

User manual for the Olympus Stylus 760 in English. This PDF manual has 84 pages.

Page: 1
DIGITAL CAMERA Instruction Manual Getting to know your camera better Quick Start Guide Get started using your camera right away. Button operations Menu operations Printing pictures Using OLYMPUS Master ( Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ( We recommend that you take test shots to get accustomed to your camera before taking important photographs. ( In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ( The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Appendix d4328_e_0000_7.book Page 1 Friday, December 15, 2006 10:47 AM
Page: 2
2 EN Contents Test out the functions of the camera buttons by following along with the illustrations. Learn how to print pictures you have taken. Learn how to transfer and save pictures to a computer. Find out more about camera operations and how to take better pictures. Read about convenient functions and safety precautions on how to use your camera more effectively. Learn about the menus that control the functions and settings for basic operation. Button operations Menu operations Printing pictures Getting to know your camera better Appendix P. 10 P. 18 P. 36 P. 50 P. 60 Using OLYMPUS Master P. 42 Quick Start Guide P. 3 d4328_e_0000_7.book Page 2 Friday, December 15, 2006 10:47 AM
Page: 3
EN 3 Quick Start Guide Gather these items (box contents) ( Pull the strap tight so that it does not come loose. Digital Camera Strap LI-42B Lithium Ion Battery LI-40C Battery Charger USB Cable AV Cable OLYMPUS Master Software CD-ROM Items not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Attach the strap Quick Start Guide d4328_e_0000_7.book Page 3 Friday, December 15, 2006 10:47 AM
Page: 4
4 EN Quick Start Guide Prepare the battery a. Charge the battery ( Battery comes partially charged. b. Insert the battery in the camera ( You can shoot pictures with this camera even without using an optional xD- Picture Card™ (hereinafter referred to as “the card”). For details on inserting the card, please refer to “Inserting and removing the card” (P. 62). 2 1 3 Charging Indicator Light On (Red): Charging Light Off: Charging complete (Charging time: Approx. 5 hours) AC Wall Outlet Power Cable Battery Charger Lithium Ion Battery Battery lock knob • To remove the battery, slide the battery lock knob in the direction of the arrow. ( Insert the battery from the side. 1 2 3 4 5 d4328_e_0000_7.book Page 4 Friday, December 15, 2006 10:47 AM
Page: 5
EN 5 Quick Start Guide Turn the camera on This explains how to turn on the camera in shooting mode. a. Set the mode dial to K. Still picture shooting modes b. Press the o button. ( To turn off the camera, press the o button once again. K This function allows you to shoot with the camera’s automatic settings. s This function allows you to shoot pictures by selecting a scene according to the shooting condition. g This function allows you to set the target items by following the shooting guide displayed on the screen. • When the date and time have not yet been set, this screen will appear. When viewing pictures (playback mode) When shooting movies (shooting mode) When shooting still pictures (shooting mode) o Button MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- d4328_e_0000_7.book Page 5 Friday, December 15, 2006 10:47 AM
Page: 6
6 EN Quick Start Guide Set date and time a. Press the 1F button and the 2Y button to select [Y]. • The first two digits of the year are fixed. b. Press the 3# button. c. Press the 1F button and the 2Y button to select [M]. d. Press the 3# button. About the date and time setting screen Y-M-D (Year-Month-Day) Exits a setting. Minute Date formats (Y-M-D, M-D-Y, D-M-Y) Hour MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- 2Y Button 1F Button MENU X CANCEL Y / M / D Y / M / D Y Y M D D T I M E T I M E 3# Button MENU X CANCEL Y / M / D Y / M / D Y Y M D D T I M E T I M E d4328_e_0000_7.book Page 6 Friday, December 15, 2006 10:47 AM
Page: 7
EN 7 Set date and time Quick Start Guide e. Press the 1F button and the 2Y button to select [D]. f. Press the 3# button. g. Press the 1F button and the 2Y button to select the hours and minutes. • The time is displayed in the 24-hour format. h. Press the 3# button. i. Press the 1F button and the 2Y button to select [Y/M/D]. j. After all items have been set, press the o button. • For precise time setting, press the o button as the time signal strikes 00 seconds. MENU X CANCEL Y / M / D Y / M / D Y Y M D D T I M E T I M E OK MENU X CANCEL SET Y / M / D Y / M / D Y Y M D D T I M E T I M E OK MENU X CANCEL SET Y / M / D Y / M / D Y Y M D D T I M E T I M E o Button P HQ HQ 3072 3072×2304 2304 [IN IN] 4 4 [ ] d4328_e_0000_7.book Page 7 Friday, December 15, 2006 10:47 AM
Page: 8
8 EN Quick Start Guide Take a picture a. Hold the camera c. Shoot Horizontal grip Vertical grip b. Focus Shutter Button (Pressed halfway) The green lamp indicates the focus and exposure are locked. Place this mark over your subject. The number of storable still pictures is displayed. P HQ HQ 3072 3072×2304 2304 [IN IN] 4 4 [ ] (Pressed completely) Shutter Button The card access lamp blinks. d4328_e_0000_7.book Page 8 Friday, December 15, 2006 10:47 AM
Page: 9
EN 9 Quick Start Guide View pictures a. Set the mode dial to q. a. Press the 4& button and the 3# button to display the picture that you want to erase. b. Press the /S button. c. Press the 1F button to select [YES] and press the o button to erase the picture. 12:30 12:30 '07.07.26 '07.07.26 100-0001 100-0001 1 HQ HQ [IN IN] Arrow Pad Next Picture Prev. Picture Mode Dial o Button Erase pictures /S Button OK SET MENU BACK YES NO [ I N ] ERASE 1F Button o Button OK SET MENU BACK YES NO ERASE d4328_e_0000_7.book Page 9 Friday, December 15, 2006 10:47 AM
Page: 10
10 EN Button operations Button operations Shooting still pictures Set the mode dial to K, s or g, and lightly press the shutter button (halfway). The green lamp lights when the focus and exposure are locked (focus lock). Now press the shutter button all the way (completely) to shoot a picture. Focus lock - Locking the focus and then composing the shot Compose your picture with the focus locked, and then fully press the shutter button to shoot a picture. • If the green lamp blinks, the focus is not adjusted properly. Try locking the focus again. o button Turning the camera on and off Power on: Shooting mode • Lens extends • Monitor turns on Playback mode • Monitor turns on Shutter button Shooting pictures P [IN IN] 4 4 [ ] HQ HQ 3072 3072×2304 2304 Shooting mode Flash mode Self-timer Macro mode/ Super macro mode 6 a e 0 d 9 c 8 5 3 1 2 7 4 b Playback mode Shooting modes 1 2 P HQ HQ 3072 3072×2304 2304 [IN IN] 4 4 [ ] Green lamp d4328_e_0000_7.book Page 10 Friday, December 15, 2006 10:47 AM
Page: 11
Button operations EN 11 AF Lock - Locking the focus position When the scene is k H, you can lock the focus position by pressing 2. Press 2 again to cancel the AF lock. g “s Shoot pictures by selecting a scene mode according to the situation” (P. 11) • AF lock is automatically canceled after one shot. Recording movies Set the mode dial to n, and lightly press the shutter button to lock the focus, and then press the shutter button completely to start recording. Press the shutter button again to stop recording. Set the mode dial to the desired shooting or playback mode. The camera determines the optimum settings for the shooting conditions automatically. You can shoot pictures by selecting a scene mode according to the situation. Select a scene mode/change another scene mode to another one • Press m to select [SCN] from the top menu, and change it to another scene mode. • By switching to another scene mode, most settings will be changed to the default settings of each scene mode. Follow the shooting guide displayed on the screen to set the target items. • Press m to display the shooting guide again. • To change the setting without using the shooting guide, set the shooting mode to another one. • The content set using the shooting guide will change to the default setting by pressing m or changing the mode using the mode dial. Audio is recorded with the movie. Mode dial Switching between shooting and playback modes K Shooting still pictures s Shoot pictures by selecting a scene mode according to the situation g Follow the shooting guide for setting n Recording movies HQ HQ 3072 3072×2304 2304 [IN IN] 4 4 [ ] k k AF lock mark 3 OK SET 4 Set particular lighting. 5 Shooting into backlight. Brightening subject. Blurring background. Adjusting area in focus. 3 2 1 SHOOTING GUIDE 1 / 3 This icon lights red during movie recording. A 00:36 00:36 00:36 The remaining recording time is displayed. When the remaining recording time reaches 0, recording will stop automatically. d4328_e_0000_7.book Page 11 Friday, December 15, 2006 10:47 AM
Page: 12
Button operations 12 EN The last picture taken is displayed. • Press the arrow pad to view other pictures. • Use the zoom button to switch between close-up playback, index display and calendar display. • Press o to hide the information displayed on the screen for 3 seconds during single-frame playback. g “MOVIE PLAY Playing back movies” (P. 26) The still pictures registered in “My Favorite” are displayed. • Press the arrow pad to view other pictures. • Use the zoom button to switch among close-up playback and index display. Press m during “My Favorite” playback to display the top menu, and then select [SLIDESHOW] or [ADD FAVORITE]. g “SLIDESHOW Playing back pictures automatically” (P. 25) “ADD FAVORITE Adding favorite images” (P. 26) Erasing pictures from “My Favorite” • Use the arrow pad to select the picture you want to erase, and press S. Select [YES], and press o. • Erasing a picture from “My Favorite” does not erase the original picture recorded in the internal memory or to the card. Use the arrow pad to select scenes, playback picture, and the items on the menus. Displays the function menu which contains the functions and settings used during shooting. This button is also used to confirm your selection. The functions you can set with the function menu Select the shooting mode when you have set the mode dial to K. q Viewing still pictures/Selecting playback mode P Viewing “My Favorite” YES/ NO Arrow pad (1243) o button (OK/FUNC) P/AUTO .....................................................................Shooting pictures with automatic settings P (Program auto) The camera automatically sets the optimum aperture value and shutter speed for the brightness of the subject. AUTO (Full auto mode) The camera automatically sets white balance and ISO sensitivity in addition to the aperture and shutter speed. My Favorite My Favorite My Favorite My Favorite OK MENU SLIDE- SHOW SLIDE- SHOW ADD FAVORITE ADD FAVORITE SET EXIT My Favorite 4 5 d4328_e_0000_7.book Page 12 Friday, December 15, 2006 10:47 AM
Page: 13
Button operations EN 13 Other functions you can set with the function menu g “WB Adjusting the color of a picture” (P. 22) “ISO Changing the ISO sensitivity” (P. 22) “DRIVE Using sequential (continuous) shooting” (P. 22) “ESP/n Changing the area for measuring the brightness of a subject” (P. 23) Displays the top menu. Shooting mode: Zooming in on your subject Optical zoom ratio: 3× m button (MENU) Displaying the top menu Zoom button Zooming while shooting/close-up playback P P P P WB AUTO ISO AUTO o h P/AUTO P/AUTO ESP 43: Select a setting, and press o. 12: Select the function to be set. Function menu 6 7 P [IN IN] 4 4 [ ] HQ HQ3072 3072×2304 2304 P [IN IN] 4 4 [ ] HQ HQ3072 3072×2304 2304 Zoom out: Press W on the zoom button. Zoom in: Press T on the zoom button. d4328_e_0000_7.book Page 13 Friday, December 15, 2006 10:47 AM
Page: 14
Button operations 14 EN Playback mode: Changing the picture display Press 1F in shooting mode, and then use the arrow pad 43 to adjust the exposure and press o to confirm the setting. • Adjustable from -2.0EV to +2.0 EV 1F button Changing picture brightness 1 2 4 3 [IN IN] 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 4 HQ HQ [IN IN] 1 2 3 4 5 6 7 8 9 [IN IN] [ [IN IN] [IN] Close-up playback • Press T to incrementally enlarge the picture up to 10 times the original size. Press W to reduce the size. • Use the arrow pad during close- up playback to scroll around the picture. • Press o to return to single-frame playback. Index display • Use the arrow pad to select a picture for playback, and press o to play back the single- frame of the picture selected. Calendar display • Use the arrow pad to select the date, and press o or T on the zoom button to display the picture on the date selected. Single-frame playback • Use the arrow pad to browse pictures. W T W W T W W T W T T 8 + 2.0 2.0 OK SET P + 2.0 Activate the setting. 3: Brighten 4: Darken d4328_e_0000_7.book Page 14 Friday, December 15, 2006 10:47 AM
Page: 15
Button operations EN 15 Press 3# in shooting mode to select the flash setting. Press o to confirm your selection. Press 2Y in shooting mode to select on and off for the self-timer. Press o to confirm your selection. • After pressing the shutter button completely, the self-timer lamp lights for approximately 10 seconds, blinks for approximately 2 seconds, and then the picture is taken. • To cancel the self-timer, press 2Y. • Self-timer shooting is automatically canceled after one shot. Press 4& in shooting mode to select the macro mode. Press o to confirm your selection. • Zoom and flash cannot be used in super macro mode. Press h in shooting mode to turn the image stabilizer on or off. Press o to confirm your selection. • It is recommended to make the image stabilizer inactive, when mounted on a tripod. • At very slow shutter speeds (for example when taking night photographs), some images may not acquire the proper stabilization effect. • If the camera is severely shaken, digital images may not be stabilized properly. 3# button Flash shooting AUTO (Auto-flash) The flash fires automatically in low light or backlight conditions. ! Red-eye reduction flash This emits pre-flashes to reduce the occurrence of red-eye in your pictures. # Fill-in flash The flash fires regardless of the available light. $ Flash off The flash does not fire even in low light conditions. 2Y button Self-timer shooting Y OFF Cancel the self-timer. Y ON Set the self-timer. 4& button Shooting pictures close to the subject OFF Macro mode is deactivated. & Macro mode This mode lets you shoot as close as 20 cm/7.9 in. (wide) and 50 cm/19.7 in. (tele) from your subject. % Super macro mode This mode lets you shoot as close as 8 cm/3.2 in. from your subject. h button Shooting pictures using the image stabilizer h OFF Image stabilizer is deactivated. h ON Image stabilizer is activated. 9 0 a b d4328_e_0000_7.book Page 15 Friday, December 15, 2006 10:47 AM
Page: 16
Button operations 16 EN Press q in shooting mode to switch to playback mode and display the last picture taken. Press q again or press the shutter button halfway to return to shooting mode. g “q Viewing still pictures/Selecting playback mode” (P. 12) When a printer is connected to the camera, display the picture you want to print in playback mode and press <. g “EASY PRINT” (P. 36) Press  in shooting mode. The monitor will be set to the brightest state set in [s] for 10 seconds. g “s Adjusting the brightness of monitor” (P. 32) In playback mode, select the picture you want to erase, and press S. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. g “0 Protecting pictures” (P. 29) q/< button Viewing pictures/Printing pictures q Viewing pictures immediately < Printing pictures /S button Increasing the brightness of the monitor/Erasing pictures  Increasing the brightness of the monitor S Erasing pictures c d d4328_e_0000_7.book Page 16 Friday, December 15, 2006 10:47 AM
Page: 17
Button operations EN 17 Changing the information displays Press d to change the display in the following order. *1 Not displayed in case of n. Displaying the menu guide With menu items selected, hold down d to display the menu guide. Release d to close the menu guide. Checking the time While the camera is off, press d to display the set alarm time (when [ALARM CLOCK] is set) and the current time for 3 seconds. d button Changing the information on display/Display the menu guide/Checking the time e n R j +2.0 +2.0 l k[IN IN] 4 4 [ ] $ HQ HQ 3072 3072×2304 2304 ISO ISO 1600 1600 % P P $ ISO ISO 1600 1600 n j % HQ HQ 3072 3072×2304 2304 +2.0 +2.0 k[IN IN] 4 4 [ ] R l 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 4 HQ HQ [IN IN] ISO 400 ISO 400 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 4 +2.0 +2.0 1/1000 1000 F3.5 F3.5 HQ HQ 3072 3072×2304 2304 [IN IN] ISO 400 ISO 400 12:30 12:30 '07.07.26 '07.07.26 4 +2.0 +2.0 1/1000 1000 F3.5 F3.5 HQ HQ [IN IN] Frame assist*1 Simple display*1 Normal display $ ISO ISO 1600 1600 n j % k R l [IN IN] 4 [ ] +2.0 +2.0 HQ HQ P Histogram display*1 Shooting mode Normal display Detailed display Playback mode No information display Histogram display*1 [ ] ure brightness pictures. d4328_e_0000_7.book Page 17 Friday, December 15, 2006 10:47 AM
Page: 18
18 EN Menu operations Menu operations Pressing m displays the top menu on the monitor. • The items displayed on the top menu differ according to the mode. • When [CAMERA MENU], [PLAYBACK MENU], [EDIT], [ERASE], or [SETUP] is selected, the menu corresponding to the respective functions is displayed. • When your camera is set according to the shooting guide with the mode dial set at g, press m to display the shooting guide screen. During menu operations, the buttons and their respective functions are displayed at the bottom of the monitor. Follow these guides to navigate the menus. About the menus Operation guide o button Arrow pad (1243) m button OK MENU SETUP SETUP IMAGE QUALITY IMAGE QUALITY RESET RESET CAMERA MENU CAMERA MENU SILENT MODE SILENT MODE EXIT SET OK SET MENU BACK 1 2 CAMERA MENU WB AUTO ISO AUTO DIGITAL ZOOM DRIVE o ESP OFF Top menu (in still picture shooting mode) OK MENU SETUP SETUP IMAGE QUALITY IMAGE QUALITY RESET RESET CAMERA MENU CAMERA MENU SILENT MODE SILENT MODE EXIT SET Operation guide m button 1243 on the arrow pad : Returns to the previous menu. : Exits the menu. : Press 1243 to select a setting. : Sets the selected item. MENU BACK MENU EXIT OK SET o d4328_e_0000_7.book Page 18 Friday, December 15, 2006 10:47 AM
Page: 19
Menu operations EN 19 This explains how to use the menus with the [AF MODE] setting as an example. 1 Set the mode dial to K. 2 Press m to display the top menu. Select [CAMERA MENU] and press o to confirm your selection. • [AF MODE] is one of the selections on the [CAMERA MENU]. Press o to confirm your selection. 3 Use the arrow pad 12 to select [AF MODE], and press o. • Some settings may not be available, depending on the shooting/scene mode. • When pressing 4 on this screen, the cursor moves to the page display. Press 12 to change the page. To select an item or function, press 3 or o. 4 Use the arrow pad 12 to select [iESP] or [SPOT], and press o. • The menu item is set and the previous menu is displayed. Press m repeatedly to exit the menu. • To cancel changes and continue menu operation, press m before pressing o. Using the menus OK MENU SETUP SETUP IMAGE QUALITY IMAGE QUALITY RESET RESET CAMERA MENU CAMERA MENU SILENT MODE SILENT MODE EXIT SET OK SET MENU BACK 1 2 WB AUTO ISO AUTO DIGITAL ZOOM DRIVE o ESP OFF OK SET MENU BACK 2 1 AF MODE SPOT R OFF PANORAMA The selected item is displayed in a different color. Page display: The page display mark is displayed when there are additional menu items on the next page. OK SET MENU BACK 2 1 AF MODE R PANORAMA SPOT iESP d4328_e_0000_7.book Page 19 Friday, December 15, 2006 10:47 AM
Page: 20
Menu operations 20 EN • Some functions are not available according to the selected mode. g “Functions available in shooting modes and scene modes” (P. 58) g “SETUP menus” (P. 30) • The factory default settings are displayed in gray ( ). Still picture image quality and their applications Movie image quality Shooting mode menu K s IMAGE QUALITY Changing the image quality Image quality/Image size Compression Application SHQ 3072 × 2304 Low compression • This is useful for printing large images on A3- size (16.5 × 11.7 in.) paper. • This is useful for performing computer image processing, such as contrast adjustment and red-eye correction. HQ 3072 × 2304 Standard compression SQ1 2560 × 1920 Standard compression • This is useful for A3 (16.5 × 11.7 in.) /A4 (11.7 × 8.5 in.)-size prints. • This is useful for computer editing such as rotating or adding text to a picture. 2304 × 1728 2048 × 1536 SQ2 1600 × 1200 Standard compression • This is useful for postcard-sized (6 × 4 in.) prints. • This is useful for viewing pictures on a computer. 1280 × 960 1024 × 768 • This is useful for sending as e-mail attachments. 640 × 480 Low compression 16:9 1920 × 1080 Standard compression • This is useful for expressing the broadness of a subject such as landscapes and for viewing pictures on a wide-screen television. Image quality/Image size SHQ 640 × 480 HQ 320 × 240 SQ 160 × 120 OK MENU SETUP SETUP IMAGE QUALITY IMAGE QUALITY RESET RESET CAMERA MENU CAMERA MENU SILENT MODE SILENT MODE EXIT SET 2 4 CAMERA MENU WB ISO DRIVE ESP/n DIGITAL ZOOM AF MODE R PANORAMA* * An Olympus xD-Picture Card is required. 4 3 1 5 1 d4328_e_0000_7.book Page 20 Friday, December 15, 2006 10:47 AM
Page: 21
Menu operations EN 21 It restores shooting functions back to default settings. The mode dial must not be set to g. Functions restored to the factory default settings The scene mode selection screen displays sample images as well as a description of the shooting situation for which it is designed. It can be set only when the mode dial is set to s. g “Mode dial Switching between shooting and playback modes” (P. 11) • By switching to another scene mode, most settings will be changed to the default settings of each scene mode. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which the next picture can be taken. *2 The focus is locked at the first frame. *3 The camera focuses for each frame. *4 The focus distance is fixed at approximately 5.0 m (16.4 ft.). RESET Restoring default settings NO /YES Function Factory default setting Ref. Page F 0.0 P. 14 # AUTO P. 15 Y YOFF P. 15 & OFF P. 15 IMAGE STABILIZER OFF P. 15 IMAGE QUALITY HQ P. 20 WB AUTO P. 22 ISO AUTO P. 22 DRIVE o P. 22 ESP/n ESP P. 23 DIGITAL ZOOM OFF P. 23 AF MODE SPOT P. 23 R OFF P. 23 s (Scene) Selecting a scene mode according to the shooting situation PORTRAIT / LANDSCAPE / LANDSCAPE+PORTRAIT / NIGHT SCENE*1 / NIGHT+PORTRAIT*1 / SPORT / INDOOR / CANDLE*1 / SELF PORTRAIT / AVAILABLE LIGHT*1 / SUNSET*1 / FIREWORKS*1 / CUISINE / BEHIND GLASS / DOCUMENTS / AUCTION / SHOOT & SELECT1*2 / SHOOT & SELECT2*3 / BEACH & SNOW / UNDER WATER WIDE1 / UNDER WATER WIDE2*4 / UNDER WATER MACRO 2 3 B F D G U OK SET MENU BACK 1 PORTRAIT Scene mode selection screen Set the scene mode. d4328_e_0000_7.book Page 21 Friday, December 15, 2006 10:47 AM
Page: 22
Menu operations 22 EN [e SHOOT & SELECT1]/[f SHOOT & SELECT2] • These scene modes allow you to take sequential pictures by holding down the shutter button. After shooting the pictures, select the ones you want to erase by marking them with a R and press S to erase them. CAMERA MENU WB................................................................................................. Adjusting the color of a picture AUTO The white balance is adjusted automatically for natural color, regardless of the light source. 5 Sunny day For shooting under a clear sky. 3 Cloudy day For shooting under a cloudy sky. 1 Tungsten light For shooting under tungsten lighting. w Fluorescent lamp 1 For shooting under daylight fluorescent lighting. (This type of lamp is mainly used in homes.) x Fluorescent lamp 2 For shooting under a neutral white fluorescent lamp. (This type of lamp is mainly used in desk lamps.) y Fluorescent lamp 3 For shooting under a white fluorescent lamp. (This type of lamp is mainly used in offices.) ISO......................................................................................................Changing the ISO sensitivity AUTO Sensitivity is automatically adjusted according to the conditions of the subject. 80/100/200/ 400/800/1600 A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera’s light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. DRIVE.............................................................................Using sequential (continuous) shooting o Shoots 1 frame at a time when the shutter button is pressed. j Focus and exposure are locked at the first frame. The sequential shooting speed varies depending on the image quality setting. W Pictures can be taken at a faster speed than normal sequential shooting. Selected picture. e e GO OK BACK MENU S Press 43 to scroll through the pictures. Pictures with a R mark are erased. Press o to mark the pictures to be erased. 4 d4328_e_0000_7.book Page 22 Friday, December 15, 2006 10:47 AM
Page: 23
Menu operations EN 23 You can take a sequence of pictures at one time by holding down the shutter button. The camera will take pictures continuously until you release the shutter button. • In [W], the settings change as follows. • The flash mode is fixed at [$]. • [ISO] is fixed at [AUTO]. • [IMAGE QUALITY] is limited to [2048 × 1536] and lower. The digital zoom can be used to take close-up shots with stronger magnification when combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 15×) When activated [ON], the camera will record about 4 seconds of audio after the picture is taken. When recording, aim the camera microphone at the source of the sound you want to record. ESP/n ..................................... Changing the area for measuring the brightness of a subject ESP Meters the brightness at the center of the monitor and the surrounding area separately to capture an image with balanced brightness. When taking pictures against strong backlight, the center of the picture may appear dark. n Only the center of the monitor is metered. Recommended for taking a picture against strong backlight. DIGITAL ZOOM.............................................................................. Zooming in on your subject OFF /ON AF MODE.......................................................................................... Changing the focusing area iESP The camera determines which subject within the screen to focus on. Even when the subject is not in the center of the screen, focusing is possible. SPOT Focus selection is based on the subject within the AF target mark. R.............................................................................................. Recording sound with still pictures OFF /ON P [IN IN] 4 4 [ ] HQ HQ3072 3072×2304 2304 P [IN IN] 4 4 [ ] HQ HQ3072 3072×2304 2304 Zoom bar White area: The optical zoom area Red area: The digital zoom area Optical zoom Digital zoom d4328_e_0000_7.book Page 23 Friday, December 15, 2006 10:47 AM
Page: 24
Menu operations 24 EN Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software from the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting. Use the arrow pad to specify at which edge you want to connect the pictures, and then compose your shots so that the edges of the pictures overlap. The part of the previous picture that will be combined will not remain in the frame. Remember the frame displayed on the monitor as a rough indication, then compose the shot so that the edges of the previous picture in the frame overlap with the next shot. • Press o to exit panorama shooting. • Panorama shooting is possible for up to 10 pictures. After 10 pictures have been shot, a warning mark (C) is displayed. This function allows you to turn off operational sounds that occur during shooting and playback, warning beeps, shutter sounds, etc. It cannot be set when the mode dial is set to g. PANORAMA..................................................................................Creating a panoramic picture SILENT MODE Setting to turn off operational sounds OFF /ON Connects pictures from left to right Connects pictures from bottom to top 3: The next picture is connected at the right edge. 4: The next picture is connected at the left edge. 1: The next picture is connected at the top. 2: The next picture is connected at the bottom. 5 d4328_e_0000_7.book Page 24 Friday, December 15, 2006 10:47 AM
Page: 25
Menu operations EN 25 g “SETUP menus” (P. 30) “SILENT MODE Setting to turn off operational sounds” (P. 24) • The factory default settings are displayed in gray ( ). • Set [BGM] to [ON] or [OFF]. • Select the transition effect between pictures from [TYPE]. • Only the first frame of each movie is displayed. • After setting [BGM] and [TYPE], press o to start the slideshow. • Press o or m to cancel the slideshow. Playback mode menu q SLIDESHOW Playing back pictures automatically BGM ON / OFF TYPE NORMAL FADER SLIDE ZOOM 5 EDIT OK MENU MOVIE PLAY MOVIE PLAY ADD FAVORITE ADD FAVORITE EDIT EDIT ERASE ERASE SETUP SETUP PLAYBACK MENU PLAYBACK MENU PRINT ORDER PRINT ORDER SILENT MODE SILENT MODE CALENDAR CALENDAR EXIT SET OK MENU SLIDE- SHOW SLIDE- SHOW ADD FAVORITE ADD FAVORITE EDIT EDIT ERASE ERASE SETUP SETUP PLAYBACK MENU PLAYBACK MENU PRINT ORDER PRINT ORDER SILENT MODE SILENT MODE CALENDAR CALENDAR EXIT SET 5 8 Q REDEYE FIX BLACK & WHITE SEPIA FRAME LABEL CALENDAR BRIGHTNESS SATURATION When a still picture is selected When a movie is selected 5 EDIT 6*1 7 0 y*2 R*2 7 PLAYBACK MENU 2 8 7 *1 A card is required. *2 This is not displayed when a movie is selected. 3 5 INDEX 1 4 4 1 OK SET MENU BACK SLIDESHOW OFF ON BGM TYPE [ I N ] [ ] [ ] d4328_e_0000_7.book Page 25 Friday, December 15, 2006 10:47 AM
Page: 26
Menu operations 26 EN Select [MOVIE PLAY] from the top menu, and press o to play back the movie. You can also playback a movie by selecting a picture with the movie icon (n) and pressing o. Operations during movie playback • Press o to pause the playback. Operations during pause • To resume the movie, press o. • To cancel the playback of the movie in the middle of it or during pause, press m. This function registers your favorite still pictures as separate still pictures. You can register up to 9 favorite pictures. g “P Viewing “My Favorite”” (P. 12) • Use the arrow pad to select a picture, and press o. MOVIE PLAY Playing back movies ADD FAVORITE Adding favorite images 2 OK 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 4 [IN IN] MOVIE PLAY 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 00:00 00:36 00:00 00:36 [IN IN] 1: Increases the volume. 2: Reduces the volume. 3: Each time you press the button, the playback speed changes in the following order: 2×; 20×; and back to 1×. 4: Plays the movie in reverse. Each time you press the button, the playback speed changes in the following order: 1×; 2×; 20×; and back to 1×. Playing time/Total recording time 00:05 00:36 00:05 00:36 [IN IN] 1: Displays the first frame. 2: Displays the last frame. 3: Displays the next frame. 4: Displays the previous frame. 3 OK MENU A D D FAV O R I T E BACK SET d4328_e_0000_7.book Page 26 Friday, December 15, 2006 10:47 AM
Page: 27
Menu operations EN 27 • Registered pictures cannot be erased even by formatting the internal memory. • A registered picture can be used as the startup screen picture or menu screen background picture. g “PW ON SETUP Setting the startup screen and volume” (P. 31) “MENU THEME Setting the menu screen color and background” (P. 31) Note • Registered pictures cannot be edited, printed, copied to a card, transferred to a computer, or played back on a computer. This function lets you playback the pictures in a calendar format, organized by the date the images were recorded. This changes the image size of a picture and saves it as a new file. This function corrects the red-eye look that often occurs when taking pictures with a flash and saves the picture as a new file. This changes the picture to black and white and saves it as a new file. This changes the picture to sepia and saves it as a new file. This function lets you select a frame, integrate the frame with an image, and save it as a new picture. • Select a frame with 43 and press o. • Select the picture to be synthesized with the frame with 43, and press o. (Press 12 to turn the picture 90 degrees clockwise or 90 degrees counterclockwise.) • Press the arrow pad and the zoom button to adjust the position and size of the picture, and press o. This function lets you select a label, integrate the label with an image, and save it as a new picture. • Select the picture with 43, and press o. • Select the label with 43, and press o. (Press 12 to turn the label 90 degrees clockwise or 90 degrees counterclockwise.) • Press the arrow pad and the zoom button to adjust the position and size of the picture, and press o. • Set the color of the label with the arrow pad, and press o. CALENDAR Playing back the pictures in a calendar format EDIT Q.................................................................................................... Changing the size of pictures 640 × 480 /320 × 240 REDEYE FIX................................................................................. Fixing the red-eye in pictures BLACK & WHITE...........................................................Changing pictures to black and white SEPIA.......................................................................................Changing pictures to a sepia tone FRAME................................................................................Synthesize the frame and the picture LABEL.................................................................................................. Add a label to your picture 4 5 OK W O T SET MOVE FRAME OK SET LABEL d4328_e_0000_7.book Page 27 Friday, December 15, 2006 10:47 AM
Page: 28
Menu operations 28 EN This function lets you select a calendar format, integrate the calendar with a picture, and save it as a new file. • Select the picture with 43, and press o. • Select the calendar with 43, and press o. (Press 12 to turn the picture 90 degrees clockwise or 90 degrees counterclockwise.) • Set the date of the calendar, and press o. This function lets you adjust the brightness of a picture and save it as a new picture. • Select the picture with 43, and press o. • Adjust the brightness with 12, and press o. This function lets you adjust the vividness of the picture, and store it as a new picture. • Select the picture with 43, and press o. • Adjust the vividness with 12, and press o. This function extracts 9 frames from a movie and saves them as a new picture (INDEX) containing thumbnails of each frame. • Select a movie with 43, and press o. • The [BUSY] bar will be temporarily displayed. This function allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. g “Print settings (DPOF)” (P. 39) CALENDAR ..................................................................... Create a calendar print with a picture BRIGHTNESS..................................................................Change the brightness of the picture SATURATION....................................................................Change the vividness of the picture INDEX................................................................................ Making an index picture from a movie PRINT ORDER Making print reservations (DPOF) OK SET CALENDAR OK MENU SET BACK OK MENU SET BACK OK SET MENU BACK [ x D ] [ ] [ ] INDEX 6 d4328_e_0000_7.book Page 28 Friday, December 15, 2006 10:47 AM
Page: 29
Menu operations EN 29 Protected pictures cannot be erased with [ERASE], [SEL.IMAGE], or [ALL ERASE], but they are all erased by formatting. • Select the picture with 43, and protect it by selecting [ON] with 12. You can protect several frames in succession. 9 is displayed when the picture is protected. Pictures taken with the camera held vertically are displayed horizontally during playback. This function lets you rotate such pictures so that they are displayed vertically on the monitor, and the new picture orientations will be saved even after the power is turned off. Select a picture with 43, and use 12 to select [+90°], [0°], or [-90°]. You can rotate several frames in succession. Sound is recorded for about 4 seconds. • Select a picture with 43, and use 12 to select [YES] to begin recording. • The [BUSY] bar will be temporarily displayed. Protected pictures cannot be erased. Cancel protection before erasing protected pictures. Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. • When erasing the picture in the internal memory, do not insert the card into the camera. • When erasing the picture from the card, insert a card into the camera in advance. PLAYBACK MENU 0 .....................................................................................................................Protecting pictures OFF /ON y ...........................................................................................................................Rotating pictures +90°/ 0° /-90° R........................................................................................................Adding sound to still pictures YES /NO ERASE Erase selected pictures/Erase all pictures 7 OK EXIT OFF ON [ I N ] [ ] [ ] 0 OK EXIT [ I N ] y +90° OK [ I N ] EXIT y 0° -90° OK EXIT [ I N ] OK SET BACK MENU YES NO [ I N ] [ ] [ ] R R 8 d4328_e_0000_7.book Page 29 Friday, December 15, 2006 10:47 AM
Page: 30
Menu operations 30 EN • Use the arrow pad to select the picture, and press o to add R. • Press o again to cancel the selection. • When all individual pictures to be erased have been marked, press S. • Select [YES], and press o. • Select [YES], and press o. All existing data, including protected pictures, are erased when the internal memory or card is formatted. Make sure that you save or transfer important data to a computer before formatting the internal memory or card. • Make sure there is no card inserted in the camera when formatting the internal memory. • When the internal memory is formatted, the data of the frames and labels downloaded with the provided OLYMPUS Master software will be deleted. • Be sure that the card is inserted in the camera when formatting the card. • Before using non-Olympus cards or cards which have been formatted on a computer, you must format them with this camera. SEL. IMAGE........................................................................ Erase by selecting the single-frame ALL ERASE..................................... Erase all the pictures in the internal memory or the card SETUP menus MEMORY FORMAT (FORMAT)........................... Formatting the internal memory or card MENU S SEL. IMAGE [ I N ] [ ] [ ] GO BACK OK OK MENU SETUP SETUP IMAGE QUALITY IMAGE QUALITY RESET RESET CAMERA MENU CAMERA MENU SILENT MODE SILENT MODE EXIT SET OK MENU SLIDE- SHOW SLIDE- SHOW ADD FAVORITE ADD FAVORITE EDIT EDIT ERASE ERASE SETUP SETUP PLAYBACK MENU PLAYBACK MENU PRINT ORDER PRINT ORDER SILENT MODE SILENT MODE CALENDAR CALENDAR EXIT SET Playback mode Shooting mode *1 A card is required. *2 This feature is not available in [SILENT MODE]. g “SILENT MODE Setting to turn off operational sounds” (P. 24) MEMORY FORMAT (FORMAT*1 ) BACKUP*1 W PW ON SETUP MENU THEME BEEP*2 8*2 SHUTTER SOUND*2 VOLUME*2 REC VIEW FILE NAME PIXEL MAPPING s X DUALTIME ALARM CLOCK VIDEO OUT POWER SAVE SETUP d4328_e_0000_7.book Page 30 Friday, December 15, 2006 10:47 AM
Page: 31
Menu operations EN 31 Insert the optional card into the camera. Copying data does not erase the pictures in the internal memory. • It takes some time to back up data. Check if the battery is not empty before starting the copy, or use the AC adapter. You can select a language for on-screen display. Available languages vary depending on the area where you purchased this camera. You can add other languages to your camera with the provided OLYMPUS Master software. • Select [2] and press 3 to set a still picture in the internal memory or card as the startup screen. • Select [MY FAVORITE] and press 3 to set a still picture registered in “My Favorite” as the startup screen. g “ADD FAVORITE Adding favorite images” (P. 26) • [VOLUME] cannot be set in the following cases. • When [SCREEN] is set to [OFF] • When [SILENT MODE] is set to [ON] • Select [MY FAVORITE] and press 3 to set a still picture registered in “My Favorite” as the background. g “ADD FAVORITE Adding favorite images” (P. 26) BACKUP .................................................. Copying pictures in the internal memory to the card W................................................................................................. Selecting a display language PW ON SETUP ............................................................. Setting the startup screen and volume SCREEN OFF (No picture is displayed.) / 1 / 2 /MY FAVORITE VOLUME OFF (No sound) / LOW / HIGH MENU THEME................................................Setting the menu screen color and background NORMAL / BLUE / BLACK / PINK / MY FAVORITE BEEP ........................................... Adjusting the volume of the beep when buttons are pressed OFF (No sound) / LOW / HIGH 8 ................................................................Adjusting the volume of the camera warning sound OFF (No sound) / LOW / HIGH SHUTTER SOUND ................................................. Selecting the sound of the shutter button OFF (No sound) 1 LOW / HIGH 2 LOW / HIGH 3 LOW / HIGH VOLUME ......................................................................... Adjusting the volume during playback OFF (No sound) / LOW / HIGH d4328_e_0000_7.book Page 31 Friday, December 15, 2006 10:47 AM
Page: 32
Menu operations 32 EN File names and their folder names for recorded pictures are automatically generated by the camera. File names and folder names respectively include file numbers (0001 to 9999) and folder names (100 to 999), and are named as follows. The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you turn the camera off during pixel mapping, start again. Select [PIXEL MAPPING]. When [START] is displayed, press o. REC VIEW ................................................... Viewing pictures immediately after they are taken OFF The picture being recorded is not displayed. This is useful when you want to prepare for your next shot while the previous picture is being recorded. ON The picture being recorded is displayed. This is useful for making a brief check of the picture you have just taken. You can resume shooting while the picture is still being displayed. FILE NAME .........................................................................Resetting the file names of pictures RESET This method is useful when grouping files on separate cards. The file number and folder number are reset every time a new card is inserted in the camera. The folder number returns to [No. 100] and the file number returns to [No. 0001]. AUTO This method is useful when you want to manage all your files with sequential numbers. Even if a new card is inserted, the folder number and file number are retained from the previous card. This helps you to manage multiple cards. PIXEL MAPPING .....................................................Adjusting the image processing function s......................................................................................... Adjusting the brightness of monitor \ D C I M \ * * * O L Y M P \ P m d d * * * * . j p g Folder No. (100 – 999) File name Folder name Month (1 – C) Day (01 – 31) File No. (0001 – 9999) Month: Jan. – Sep. = 1 – 9, Oct. = A, Nov. = B, Dec. = C OK SET MENU BACK s s s 1: Brightens the monitor. 2: Darkens the monitor. Press o to confirm your selection. d4328_e_0000_7.book Page 32 Friday, December 15, 2006 10:47 AM
Page: 33
Menu operations EN 33 The date and time is saved with each image, and is used in the file name. • The first two digits of the year are fixed. • The time is displayed in the 24-hour format. • To set the time precisely, with the cursor at either “minute” or [Y/M/D], press o as the time signal strikes 00 seconds. • The date format is the same as that set with [X]. • The first two digits of the year are fixed. • The time is displayed in the 24-hour format. • When [X] has not been set, [ALARM CLOCK] is not available. • When [SILENT MODE] is set to [ON], the alarm will not sound. • When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time setting. X ............................................................................................................Setting the date and time DUALTIME ...................................................... Setting the date and time for another time zone OFF Switches to the date and time set in [X]. Pictures are recorded with the date and time set in [X]. ON Switches to the date and time set in [DUALTIME]. When setting the dual time, select [ON], and then set the time. Pictures are recorded with the date and time set in [DUALTIME]. ALARM CLOCK ....................................................................................................Setting alarms OFF No alarm is set or alarm is canceled. ONE TIME Alarm is activated once. After the alarm goes off, the setting is canceled. DAILY Alarm is activated daily at the set time. MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- Y-M-D (Year-Month-Day) Cancels the setting. Minute Date formats (Y-M-D, M-D-Y, D-M-Y) Hour MENU CANCEL DUALTIME Y M D T I M E Y M D T I M E m: Cancels the setting. d4328_e_0000_7.book Page 33 Friday, December 15, 2006 10:47 AM
Page: 34
Menu operations 34 EN Setting an alarm • Select [ONE TIME] or [DAILY], and set the alarm time. • You can set snooze or alarm sounds and volume. Operating, shutting off and checking the alarm • Operating the alarm: Turn off the camera. The alarm only operates when the camera is off. • Shutting off the alarm: While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note that pressing o will turn the camera on. When [SNOOZE] is [OFF], the alarm stops automatically and the camera turns off after 1 minute of no operation. • Checking the alarm settings: While the camera is off, press d to display the current and alarm set times. Times will be displayed for 3 seconds. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV, set the video output according to your TV’s video signal type. • TV video signal types differ by country/region. Check the video signal type before connecting the camera to the TV. NTSC: North America, Taiwan, Korea, Japan PAL: European countries, China TIME Sets the alarm time. SNOOZE OFF No snooze is set. ON Alarm is activated every 5 minutes, up to 7 times. ALARM SOUND 1 LOW / MID / HIGH 2 LOW / MID / HIGH 3 LOW / MID / HIGH VIDEO OUT...................................................................................Playing back pictures on a TV NTSC / PAL MOVE ALARM CLOCK TIME ALARM SOUND SNOOZE 0 9 : 0 0 0 9 : 0 0 OK SET d4328_e_0000_7.book Page 34 Friday, December 15, 2006 10:47 AM
Page: 35
Menu operations EN 35 Playing back pictures on a TV Turn off the camera and the TV before connecting. When no operation has been performed for approximately 10 seconds while in shooting mode, the monitor automatically shuts off. Pressing the zoom button or other buttons restores the camera from power save mode. POWER SAVE ..................................................... Setting the camera to the power save mode OFF /ON Connect to the TV’s video input (yellow) and audio input (white) terminals. AV cable (provided) Multi-connector Connector cover Settings on the TV Turn the TV on, and set it to video input mode. • For details of switching to video input, refer to your TV’s instruction manual. • Images and the information displayed on the screen may become cropped depending on the TV’s settings. Settings on the camera Press o in playback mode to turn the camera on. • The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display. d4328_e_0000_7.book Page 35 Friday, December 15, 2006 10:47 AM
Page: 36
36 EN Printing pictures Printing pictures By connecting the camera to a PictBridge-compatible printer, you can print out pictures directly. Select the pictures you want to print and the number of prints on the camera’s monitor. To find out if your printer is compatible with PictBridge, refer to the printer’s instruction manual. What is PictBridge? A standard for connecting digital cameras and printers of different makers and printing out pictures directly. [EASY PRINT] can be used to print out the picture displayed on the monitor. The selected picture is printed using the standard settings of your printer. The date and file name are not printed. STANDARD All printers that support PictBridge have standard print settings. If [STANDARD] is selected on the settings screens (P. 38), pictures are printed according to these settings. Refer to the printer’s instruction manual for its standard settings or contact the printer manufacturer. 1 In playback mode, display the picture you want to print out on the monitor. 2 Turn the printer on and plug the USB cable provided with the camera into the multi-connector of the camera and the printer’s USB port. • The easy print start screen is displayed. • For details of how to turn the printer on and the location of the USB port, refer to the printer’s instruction manual. Direct printing (PictBridge) Using the direct printing function • Available printing modes, paper sizes, etc., vary depending on the printer you use. Refer to the instruction manual for your printer. • For details of printing paper types, ink cassettes, etc., refer to the printer’s instruction manual. EASY PRINT USB cable Multi-connector Connector cover d4328_e_0000_7.book Page 36 Friday, December 15, 2006 10:47 AM
Page: 37
Printing pictures EN 37 3 Press <. • Printing starts. • When printing is finished, the picture selection screen is displayed. To print another picture, press 43 to select a picture, and press <. • When you are finished, disconnect the USB cable from the camera with the picture selection screen displayed. 4 Disconnect the USB cable from the camera. 5 Disconnect the USB cable from the printer. 1 Follow Steps 1 and 2 on P. 36 to display the screen for Step 3 above, and then press o. 2 Select [CUSTOM PRINT], and press o. 3 Follow the operation guide to adjust print settings. You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With the camera turned off or in shooting mode, connect the USB cable. The selection screen for the USB connection is displayed. Select [EASY PRINT]. g “EASY PRINT” Step 3 (P. 37), “CUSTOM PRINT” Step 2 (P. 37) Other print modes and print settings (CUSTOM PRINT) PC / CUSTOM PRINT EASY PRINT START OK PRINT EXIT OK SET U S B [ ] PC EASY PRINT CUSTOM PRINT EXIT Operation guide d4328_e_0000_7.book Page 37 Friday, December 15, 2006 10:47 AM
Page: 38
Printing pictures 38 EN Note • If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and [PICS/SHEET] are set to the standard. Press 43 to select the picture you want to print. You can also use the zoom button and select a picture from the index display. Selecting a print mode Setting the print paper Selecting the picture to print Setting the number of prints and data to be printed OK MENU EXIT SET PRINT MODE SELECT [ I N ] [ ] [ ] PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT Prints the selected picture. ALL PRINT Prints all the pictures stored in the internal memory or the card. MULTI PRINT Prints one picture in multiple layout format. ALL INDEX Prints an index of all the pictures stored in the internal memory or the card. PRINT ORDER Prints the pictures according to the print reservation data on the card. If no print reservations have been made, this option is not available. g “Print settings (DPOF)” (P. 39) OK SET MENU BACK PRINTPAPER SIZE SIZE BORDERLESS BORDERLESS [ I N ] [ ] [ ] SIZE BORDERLESS STANDARD STANDARD SIZE Choose from the available paper sizes on your printer. BORDERLESS Select with or without borders. In [MULTI PRINT] mode, you cannot print with a border. OFF ( ) The picture is printed inside a blank frame. ON ( ) The picture is printed filling the entire page. PICS/SHEET Available in [MULTI PRINT] mode only. The number of prints that can be printed vary depending on the printer. OK PRINT MORE SINGLEPRINT 100-0004 100-0004 [IN IN] PRINT Prints one copy of the selected picture. When [SINGLE PRINT] or [MORE] has been selected, a single copy or more copies are printed. SINGLE PRINT Makes a print reservation for the displayed picture. MORE Sets the number of prints and data to be printed for the displayed picture. OK SET MENU BACK PRINT INFO 1 WITHOUT WITHOUT DATE FILE NAME P <x [ I N ] [ ] [ ] <× Sets the number of prints. You can select up to 10 prints. DATE ( ) If you select [WITH], pictures are printed with the date. FILE NAME ( ) If you select [WITH], pictures are printed with the file name. d4328_e_0000_7.book Page 38 Friday, December 15, 2006 10:47 AM
Page: 39
Printing pictures EN 39 4 Select [OK], and press o. • Printing starts. • When printing is finished, the [PRINT MODE SELECT] screen is displayed. To cancel printing 5 In the [PRINT MODE SELECT] screen, press m. • A message is displayed. 6 Disconnect the USB cable from the camera. 7 Disconnect the USB cable from the printer. Print reservation allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. With print reservation, you can print out pictures easily either at home using a personal DPOF- compatible printer or at a photo store that supports DPOF. DPOF is a standard format used to record automatic print information from digital cameras. Pictures with print reservations can be printed using the following procedures. Printing using a DPOF-compatible photo store. You can print the pictures using the print reservation data. Printing using a DPOF-compatible printer. Printing is possible directly from a card containing print reservation data, without using a computer. For more details, refer to the printer’s instruction manual. A PC card adapter may also be necessary. Note • DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. If a card contains DPOF reservations set by another device, entering reservations using this camera may overwrite the previous reservations. • You can make DPOF print reservations for up to 999 images per card. • Not all functions may be available on all printers, or at all photo stores. Print settings (DPOF) How to make print reservations Only the images stored on the card can be reserved to print. Insert a card with recorded pictures into the camera before making print reservations. OK SET MENU BACK PRINT [ I N ] [ ] [ ] OK CANCEL OK [ I N ] [ ] [ ] SET PRINT CONTINUE CANCEL Screen during data transfer Press o. Select [CANCEL], and press o. OK CANCEL TRANSFERRING OK MENU EXIT SET PRINT MODE SELECT [ I N ] [ ] [ ] PRINT ALL PRINT MULTI PRINT ALL INDEX d4328_e_0000_7.book Page 39 Friday, December 15, 2006 10:47 AM
Page: 40
Printing pictures 40 EN To use print services without using DPOF • Pictures stored in the internal memory cannot be printed at a photo store. The pictures need to be copied to a card before taking them. g“BACKUP Copying pictures in the internal memory to the card” (P. 31) Follow the operation guide to make a print reservation for a selected picture. 1 Press m in the playback mode and display the top menu. 2 Select [PRINT ORDER] [<], and press o. 3 Press 43 to select the frames for print reservations, and then press 12 to set the number of prints. • You cannot make print reservations for pictures with A. • Repeat Step 3 to make print reservations for other pictures. 4 When you finish making print reservations, press o. 5 Select the date and time print setting, and press o. NO The pictures are printed without the date and time. DATE The selected pictures are printed with the shooting date. TIME The selected pictures are printed with the shooting time. 6 Select [SET], and press o. Single-frame reservation OK MENU PRINT ORDER < U [xD] BACK SET Operation guide OK SET MOVE 12:30 12:30 '07.07.26 '07.07.26 100-0004 100-0004 4 HQ HQ × [xD xD] 0 OK SET MENU BACK X X X NO DATE TIME OK SET MENU BACK PRINT ORDER SET CANCEL [xD] [ ] [ ] 1 ( 1 ( 1) 1) d4328_e_0000_7.book Page 40 Friday, December 15, 2006 10:47 AM
Page: 41
Printing pictures EN 41 Reserves all the pictures stored on the card. The number of prints is set at one print per picture. 1 Press m in the playback mode and display the top menu. 2 Select [PRINT ORDER] [U], and press o. 3 Select the date and time setting, and press o. NO The pictures are printed without the date and time. DATE All pictures are printed with the shooting date. TIME All pictures are printed with the shooting time. 4 Select [SET], and press o. You can reset all the print reservation data or just for selected pictures. 1 Select top menu [PRINT ORDER], and press o. To reset the print reservation data for all the pictures 2 Select [<] or [U], and press o. 3 Select [RESET], and press o. To reset the print reservation data for a selected picture 2 Select [<], and press o. 3 Select [KEEP], and press o. 4 Press 43 to select the picture with the print reservations you want to cancel, and press 2 to decrease the number of prints to 0. • Repeat Step 4 to cancel print reservations for other pictures. 5 When you are finished canceling print reservations, press o. 6 Select the date and time setting, and press o. • The setting is applied to the remaining pictures with print reservations. 7 Select [SET], and press o. All-frame reservation Resetting print reservation data OK SET MENU BACK PRINT ORDER SETTING RESET KEEP PRINT ORDERED PRINT ORDERED d4328_e_0000_7.book Page 41 Friday, December 15, 2006 10:47 AM
Page: 42
42 EN Using OLYMPUS Master Using OLYMPUS Master Using the USB cable provided with your camera, you can connect the camera and computer and download (transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera. OLYMPUS Master is a software application for managing your digital images on your computer. Installing it on your computer lets you do the following: Overview Install the OLYMPUS Master software gP. 43 Connect the camera to the computer using the USB cable gP. 45 Start up the OLYMPUS Master software gP. 46 Download image files to the computer gP. 46 Disconnect the camera from the computer gP. 47 Using OLYMPUS Master What is OLYMPUS Master? Prepare the following items before starting. Computer equipped with a USB port OLYMPUSMaster2 CD-ROM USB cable ( Download images from the camera or other media ( View images and movies • You can run a slideshow and play back sound. ( Manage images • Manage images in an album or folder. Downloaded images are automatically sorted by date, allowing you to search for images quickly. ( Edit images • You can rotate images, trim them and change the size. ( Edit images with the filter and correction functions ( Print images • You can easily print images. ( Make panoramic images • You can make panoramic images using pictures taken in panorama mode. ( Update the version of your camera’s firmware. For details of other functions and operations, refer to the “Help” guide in the OLYMPUS Master reference manual. d4328_e_0000_7.book Page 42 Friday, December 15, 2006 10:47 AM
Page: 43
EN 43 Using OLYMPUS Master Before installing the OLYMPUS Master software, please confirm that your computer is compatible with the following system requirements. For newer operating systems, please refer to the Olympus web site as shown on the back cover of this manual. Operating environment Windows OS Windows 2000 Professional/XP Home Edition/XP Professional/Vista CPU Pentium III 500 MHz or later RAM 256 MB or more Hard disk capacity 500 MB or more Monitor 1,024 × 768 pixels or more 65,536 colors or more (16.77 million colors or more recommended) Other USB port or IEEE 1394 port Internet Explorer 6 or later QuickTime 7 or later recommended DirectX 9 or later recommended Note • Windows 98/98SE/Me are not supported. • Use a computer with a pre-installed operating system. Operations are not guaranteed on home-built computers or computers with an updated operating system. • Operations are not guaranteed when using an added USB port or IEEE 1394 port. • To install the software, you must log on as a user with administrators’ privileges. Macintosh OS Mac OS X v10.3 or later CPU Power PC G3 500 MHz or later Intel Core Solo/Duo 1.5 GHz or later RAM 256 MB or more Hard disk capacity 500 MB or more Monitor 1,024 × 768 pixels or more 32,000 colors or more (16.77 million colors or more recommended) Other USB port or IEEE 1394 port (FireWire) Safari 1.0 or later (1.3 or later recommended) QuickTime 6 or later Note • Mac versions earlier than OS X 10.3 are not supported. • Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port. • To install the software, you must log on as a user with administrators’ privileges. • Be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. • Disconnect the cable connecting the camera to the computer • Turn off the camera • Open the camera’s battery/card compartment cover Install the OLYMPUS Master software d4328_e_0000_7.book Page 43 Friday, December 15, 2006 10:47 AM
Page: 44
44 EN Using OLYMPUS Master Windows 1 Insert the CD-ROM into the CD-ROM drive. • The OLYMPUS Master setup screen is displayed. • If the screen is not displayed, double-click the “My Computer” icon and click the CD-ROM icon. 2 Select the display language and click the “OLYMPUS Master 2” button. • When the component installation screen is displayed, click “OK”. 3 Click “Next” and follow the on-screen instructions. • When the OLYMPUS Master licensing agreement is displayed, read the agreement and click “Yes” to proceed with the installation. 4 When the user information screen is displayed, enter your “Name”, select your “Region” and click “Next”. 5 When the setup type selection screen is displayed, click “Install”. • To select the components to install, select “Custom”. • The installation begins. The screen confirming that setup is completed is displayed. Click “Close”. • Next, the screen confirming whether to install OLYMPUS muvee theaterPack Trial Version is displayed. To install this software, click “Install”. d4328_e_0000_7.book Page 44 Friday, December 15, 2006 10:47 AM
Page: 45
EN 45 Using OLYMPUS Master Macintosh 1 Insert the CD-ROM into the CD-ROM drive. • The CD-ROM window is displayed. • If the CD-ROM window is not displayed, double-click the CD-ROM icon on the desktop. 2 Double-click the “Setup” icon on the desktop. • The OLYMPUS Master installation screen is displayed. • Follow the on-screen instructions. • When the OLYMPUS Master licensing agreement is displayed, read the agreement and click “Continue” and then “Continue” to proceed with the installation. • The screen confirming that installation is completed is displayed. • You must restart your computer before using OLYMPUS Master. 1 Make sure the camera is turned off. • The monitor is off. • The lens is retracted. 2 Connect the multi-connector on the camera to the USB port on the computer using the provided USB cable. • Refer to your computer’s instruction manual to locate the position of the USB port. • The camera turns on automatically. • The monitor turns on and the selection screen for the USB connection is displayed. 3 Select [PC], and press o. Connecting the camera to a computer Monitor Connector cover Multi-connector OK [ I N ] [ ] [ ] SET U S B PC EASY PRINT CUSTOM PRINT EXIT d4328_e_0000_7.book Page 45 Friday, December 15, 2006 10:47 AM
Page: 46
46 EN Using OLYMPUS Master 4 The camera is recognized by the computer. • Windows When you connect the camera to your computer for the first time, the computer attempts to recognize the camera. Click “OK” to exit the message that is displayed. The camera is recognized as a “Removable Disk”. • Macintosh The iPhoto program is the default application for managing digital images. When you connect your digital camera for the first time, the iPhoto application starts automatically, so close this application and start OLYMPUS Master. Note • The camera functions are disabled while the camera is connected to a computer. • Connecting the camera to a computer via a USB hub may cause unstable operation. In this case, do not use a hub, but connect the camera directly to the computer. • Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in Step 3, 3 is pressed and [MTP] is selected. Windows 1 Double-click the “OLYMPUS Master 2” icon on the desktop. Macintosh 1 Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master 2” folder. • The browse window is displayed. • When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master initial setting screen and user registration screen are displayed before the browse window. Follow the on-screen instructions. To exit OLYMPUS Master 1 Click “Exit” on any window. • OLYMPUS Master is exited. 1 Click “Transfer Images” on the browse window, and then click “From Camera” . • The window for selecting the pictures you want to transfer from the camera is displayed. All the images in the camera are displayed. 2 Select “New Album” and enter an album name. 3 Select the image files and click “Transfer Images”. • A window indicating that the download is complete is displayed. Start up the OLYMPUS Master software Displaying camera images on a computer Downloading and saving images d4328_e_0000_7.book Page 46 Friday, December 15, 2006 10:47 AM
Page: 47
EN 47 Using OLYMPUS Master 4 Click “Browse images now”. • The downloaded images are displayed in the browse window. To disconnect the camera 1 Make sure that the card access lamp has stopped blinking. 2 Make the following preparations for disconnecting the USB cable. Windows 1 Click the “Unplug or Eject Hardware” icon in the system tray. 2 Click the message that is displayed. 3 When a message is displayed saying that the hardware can be ejected safely, click “OK”. Macintosh 1 The trash icon changes to the eject icon when the “Untitled” or “NO_NAME” icon on the desktop is dragged. Drag and drop it on the eject icon. 3 Disconnect the USB cable from the camera. Note • Windows: When you click “Unplug or Eject Hardware”, a warning message may be displayed. Make sure that image data is not being downloaded from the camera and that all applications are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the cable. Card access lamp d4328_e_0000_7.book Page 47 Friday, December 15, 2006 10:47 AM
Page: 48
48 EN Using OLYMPUS Master 1 Click the “Album” tab on the browse window and select the album that you want to view. • The selected album image is displayed in the thumbnail area. 2 Double-click the still picture thumbnail that you want to view. • OLYMPUS Master switches to the image edit window and the picture is enlarged. • Click “Back” to return to the browse window. To view a movie 1 Double-click the movie thumbnail that you want to see in the browse window. • OLYMPUS Master switches to the edit window and the first frame of the movie is displayed. 2 To play back the movie, click “Play” at the bottom of the screen. This camera is compatible with USB mass storage. You can connect the camera to your computer using the USB cable provided with the camera to download and save images without using OLYMPUS Master. The following environment is required to use the USB cable to connect the camera to your computer. Windows: Windows 98SE/Me/2000 Professional/XP Home Edition/XP Professional/Vista Macintosh: Mac OS 9.0 to 9.2/X Note • If your computer is running Windows 98SE, you will need to install the USB driver. Before connecting the camera to your computer with the USB cable, double-click the files from the following folders on the provided OLYMPUS Master CD-ROM. (Drive name): \win98usb\INSTALL.EXE • If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 45, press 3, and select [MTP] to use Windows Photo Gallery. • Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port. • Windows 95/98/NT 4.0 • Windows 98SE upgrades from Windows 95/98 • Mac OS 8.6 or earlier • Computers with a USB port added by means of an extension card, etc. • Computers without a factory-installed OS and home-built computers Viewing still pictures and movies To download and save images to a computer without using OLYMPUS Master Thumbnail d4328_e_0000_7.book Page 48 Friday, December 15, 2006 10:47 AM
Page: 49
EN 49 Using OLYMPUS Master Please take care that your battery is fully charged! 1 Make sure that your computer is connected to the Internet. 2 Plug the USB cable into the USB port on the computer. 3 Plug the other end of the USB cable into the camera’s USB connector. • The camera turns on automatically. • The monitor turns on and the selection screen for the USB connection is displayed. 4 Select [PC], and press o. 5 In the browse window, select “Camera”, then “Update Camera/Add Display Language”. • The confirmation window for updating is displayed. 6 Click “OK”. • The updating the camera window is displayed. 7 Click “Add Language” in the updating camera display. • The “Add Display Language of Camera” window is displayed. 8 Click and select a language. 9 Click “Add”. • The new language is downloaded to your camera. Please do not remove any cable or the battery while the camera is processing. 10After the download procedure the camera display will show “OK”. You can remove the cables and turn power off. After restarting the camera you will be able to choose the new language from [SET UP]. To increase the number of languages d4328_e_0000_7.book Page 49 Friday, December 15, 2006 10:47 AM
Page: 50
50 EN Getting to know your camera better Getting to know your camera better The battery is not fully charged • Charge the battery with the charger. The battery is temporarily unable to function because of the cold • Battery performance declines in low temperatures, and the charge may not be sufficient to turn on the camera. Remove the battery and warm it by putting it in your pocket for a while. The camera is in sleep mode • To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation when the camera is turned on (when the lens is extended and the monitor is on). No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom button or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for 15 minutes, it automatically turns off (the lens retracts and the monitor turns off). Press o to turn the camera on. The mode dial is set to q or P • This is the playback mode for displaying pictures on the monitor. Set the mode dial to a shooting mode. The mode dial is in the position of g • No pictures can be taken when the shooting guide is being displayed. Take pictures after setting target terms by following the shooting guide or set it to the setting other than g in shooting mode. The flash is charging • Wait until the # (flash charge) mark stops blinking before taking the picture. The memory gauge is full • No pictures can be taken when the memory gauge is full. Wait until there is space in the memory gauge. The camera has been used in the same conditions from the time of purchase • No date and time have been set for the camera at the time of purchase. Set the date and time before using the camera. g “Turn the camera on” (P. 5) “X Setting the date and time” (P. 33) The battery has been pulled out of the camera • The date and time settings will be returned to the factory default settings if the camera is left without battery for approximately 1 day. Also, the date and time setting will be canceled earlier than this if the battery has been in the camera for a short period of time. Before taking important pictures, check that the date and time settings are correct. Shooting tips and information Tips before you start taking pictures The camera does not turn on even when a battery is loaded No picture is taken when the shutter button is pressed The date and time have not been set a b c d Before taking any pictures (Off) Maximum reached (All lit) After taking one picture (Lit) After taking several pictures (Lit) Shoot Shoot Shoot Wait d4328_e_0000_7.book Page 50 Friday, December 15, 2006 10:47 AM

Question & answers

Have a question about the Olympus Stylus 760 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus Stylus 760. Please make sure that you describe your difficulty with the Olympus Stylus 760 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus Stylus 760

Name
Email
Reaction

View a manual of the Olympus Stylus 760 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: Stylus 760
  • Filetype: PDF
  • Available languages: English, German, French, Spanish, Russian