Olympus Stylus 7000 manual

User manual for the Olympus Stylus 7000 in English. This PDF manual has 70 pages.

Page: 1
EN 2 Printed in Indonesia VN151101 1AG6P1P5272-- DIGITAL CAMERA Stylus-7000/μ-7000 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Instruction Manual Step 5 Step 2 Step 4 Step 3 How to Use the Camera “Three Ways to Adjust Settings” (p. 3) Printing “Direct printing (PictBridge)” (p. 43) “Print Reservations (DPOF)” (p. 46) Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p. 14) Preparing the Camera “Preparing the Camera” (p. 10) Contents Contents Step 1 Checking the contents of the box Digital Camera Strap LI-42B Lithium-Ion Battery LI-41C Battery Charger USB Cable AV Cable OLYMPUS Master 2 CD-ROM microSD Attachment Other accessories not shown: Instruction Manual (this manual), warranty card Contents may vary depending on purchase location. Names of Parts ...............................6 Preparing the Camera ..................10 Shooting, Playback, and Erasing...................................14 Using Shooting Modes.................17 Using Shooting Functions...........19 Using Playback Features.............23 Menus for Shooting Functions....25 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions ................32 Menus for Other Camera Settings .........................................37 Printing..........................................43 Using OLYMPUS Master 2............48 Usage Tips ....................................50 Appendix .......................................55 Index ..............................................68 ¾ ¾ ¾ ¾ ¾ ¾ ¾ d4392̲e̲oima̲000̲book̲cs2.indb I d4392̲e̲oima̲000̲book̲cs2.indb I 2008/12/09 17:05:41 2008/12/09 17:05:41
Page: 2
EN 2 Printed in Indonesia VN151101 1AG6P1P5272-- DIGITAL CAMERA Stylus-7000/μ-7000 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Instruction Manual Step 5 Step 2 Step 4 Step 3 How to Use the Camera “Three Ways to Adjust Settings” (p. 3) Printing “Direct printing (PictBridge)” (p. 43) “Print Reservations (DPOF)” (p. 46) Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p. 14) Preparing the Camera “Preparing the Camera” (p. 10) Contents Contents Step 1 Checking the contents of the box Digital Camera Strap LI-42B Lithium-Ion Battery LI-41C Battery Charger USB Cable AV Cable OLYMPUS Master 2 CD-ROM microSD Attachment Other accessories not shown: Instruction Manual (this manual), warranty card Contents may vary depending on purchase location. Names of Parts ...............................6 Preparing the Camera ..................10 Shooting, Playback, and Erasing...................................14 Using Shooting Modes.................17 Using Shooting Functions...........19 Using Playback Features.............23 Menus for Shooting Functions....25 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions ................32 Menus for Other Camera Settings .........................................37 Printing..........................................43 Using OLYMPUS Master 2............48 Usage Tips ....................................50 Appendix .......................................55 Index ..............................................68 ¾ ¾ ¾ ¾ ¾ ¾ ¾ d4392̲e̲oima̲000̲book̲cs2.indb I d4392̲e̲oima̲000̲book̲cs2.indb I 2008/12/09 17:05:41 2008/12/09 17:05:41
Page: 3
3 EN 4 EN 69 EN Please read “Menu Settings” (p. 25 to 42) while referring to this page. Using the FUNC Menu (p. 22) Using the FUNC Menu (p. 22) Frequently used shooting menu functions can be set with fewer steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 14) Zoom button (p. 19) F button (exposure compensation) (p. 20) & button (macro) (p. 20) # button (flash) (p. 19) Y button (self-timer) (p. 21) q button (playback) (p. 32) g/E button (change information display/ menu guide/check date and time) (p. 21, p. 3, p. 13) H/S button (panorama/Shadow Adjustment Technology/multi window/backlight boost/erase) (p. 22, p. 16) E button (p. 3, p. 22) Buttons in use Arrow pad E button m button Buttons in use 4 Use LM to select the desired submenu 1, and press the E button. 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU SET OK BACK DIGITAL ZOOM OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press N to highlight the page tab, and then use LM to move the page tab. Press O to return to the submenu 1. Some menus include submenus that appear by pressing the E button. 5 Use LM to select the submenu 2, and press the E button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 25 to 42) 6 Press the m button to complete the setting. ● Three Ways to Adjust Settings E button Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. Some menus may not be selectable due to combinations of functions that have been set or the selected s mode (p. 17). 1 2 ISO OFF ON CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK Arrow pad E button 1 Set the mode dial to one of the selections. The symbol in “Menu Settings” (p. 25 to 42) indicates available shooting modes. 2 Press the m button. This example describes how to use the menus to set the [DIGITAL ZOOM]. CAMERA MENU MENU EXIT SET OK Shooting mode top menu 3 Use LMNO to select the desired menu, and press the E button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. ISO OFF OFF 1 2 CAMERA MENU SET OK AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT Submenu 1 ● Information display......................p. 21, 23 Internal memory.......................... p. 11, 57 ISO....................................................p. 26 L Lithium-ion battery ..................p. 2, 10, 55 M MACRO ............................................p. 20 MEMORY FORMAT....................p. 37, 51 MENU COLOR .................................p. 38 microSD Attachment...............p. 2, 12, 58 microSD card..............................p. 12, 58 Monitor brightness s .....................p. 40 Movie A.....................................p. 15, 18 MTP ............................................p. 48, 49 MULTI WINDOW ..............................p. 22 N NTSC................................................p. 41 Number of storable pictures..............p. 57 O OLYMPUS Master 2 ...............p. 2, 29, 49 Optical zoom.....................................p. 19 P PAL ...................................................p. 41 PANORAMA......................................p. 29 PERFECT FIX ..................................p. 32 PIC ORIENTATION...........................p. 40 PictBridge .........................................p. 43 PIXEL MAPPING..............................p. 39 Playback q...............................p. 15, 54 PLAYBACK MENU .......................p. 5, 35 POWER SAVE..................................p. 42 PRINT ORDER...........................p. 36, 46 Protecting images 0 .....................p. 35 PW ON SETUP.................................p. 37 R REC VIEW........................................p. 38 REDEYE...........................................p. 19 REDEYE FIX ....................................p. 32 RESET..............................................p. 31 Resize Q........................................p. 33 Rotating images y...........................p. 35 S Saturation .........................................p. 34 s (SCENE MODE)................p. 17, 28 Self-timer ..........................................p. 21 Sepia.................................................p. 34 Sequential shooting ..........................p. 26 SETUP..............................................p. 37 SHADOW ADJ......................p. 22, 28, 32 Shooting still picture K ...................p. 14 SHUTTER SOUND...........................p. 38 Shutter speed ...................................p. 14 SILENT MODE .................................p. 42 Single-frame shooting.......................p. 26 Sleep mode.......................................p. 50 SLIDESHOW ....................................p. 32 Sound recording R ...............p. 18, 27, 36 SOUND SETTINGS..........................p. 38 SPARKLE EYE .................................p. 33 SPOT (AF MODE) ............................p. 27 Spot n (ESP/n) ..........................p. 27 Strap .................................................p. 10 SUPER MACRO...............................p. 20 U USB Cable..............................p. 2, 43, 48 V VIDEO OUT......................................p. 41 Volume........................................p. 16, 38 W Warning sound 8............................p. 38 WB....................................................p. 26 X xD-Picture Card .......................... p. 11, 56 d4392̲e̲oima̲000̲book̲cs2.indb II d4392̲e̲oima̲000̲book̲cs2.indb II 2008/12/09 17:05:42 2008/12/09 17:05:42
Page: 4
3 EN 4 EN 69 EN Please read “Menu Settings” (p. 25 to 42) while referring to this page. Using the FUNC Menu (p. 22) Using the FUNC Menu (p. 22) Frequently used shooting menu functions can be set with fewer steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 14) Zoom button (p. 19) F button (exposure compensation) (p. 20) & button (macro) (p. 20) # button (flash) (p. 19) Y button (self-timer) (p. 21) q button (playback) (p. 32) g/E button (change information display/ menu guide/check date and time) (p. 21, p. 3, p. 13) H/S button (panorama/Shadow Adjustment Technology/multi window/backlight boost/erase) (p. 22, p. 16) E button (p. 3, p. 22) Buttons in use Arrow pad E button m button Buttons in use 4 Use LM to select the desired submenu 1, and press the E button. 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK 1 2 ISO OFF OFF CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU SET OK BACK DIGITAL ZOOM OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press N to highlight the page tab, and then use LM to move the page tab. Press O to return to the submenu 1. Some menus include submenus that appear by pressing the E button. 5 Use LM to select the submenu 2, and press the E button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 25 to 42) 6 Press the m button to complete the setting. ● Three Ways to Adjust Settings E button Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. Some menus may not be selectable due to combinations of functions that have been set or the selected s mode (p. 17). 1 2 ISO OFF ON CAMERA MENU AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT SET OK Arrow pad E button 1 Set the mode dial to one of the selections. The symbol in “Menu Settings” (p. 25 to 42) indicates available shooting modes. 2 Press the m button. This example describes how to use the menus to set the [DIGITAL ZOOM]. CAMERA MENU MENU EXIT SET OK Shooting mode top menu 3 Use LMNO to select the desired menu, and press the E button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. ISO OFF OFF 1 2 CAMERA MENU SET OK AUTO o FINE ZOOM DIGITAL ZOOM DRIVE AUTO WB MENU EXIT Submenu 1 ● Information display......................p. 21, 23 Internal memory.......................... p. 11, 57 ISO....................................................p. 26 L Lithium-ion battery ..................p. 2, 10, 55 M MACRO ............................................p. 20 MEMORY FORMAT....................p. 37, 51 MENU COLOR .................................p. 38 microSD Attachment...............p. 2, 12, 58 microSD card..............................p. 12, 58 Monitor brightness s .....................p. 40 Movie A.....................................p. 15, 18 MTP ............................................p. 48, 49 MULTI WINDOW ..............................p. 22 N NTSC................................................p. 41 Number of storable pictures..............p. 57 O OLYMPUS Master 2 ...............p. 2, 29, 49 Optical zoom.....................................p. 19 P PAL ...................................................p. 41 PANORAMA......................................p. 29 PERFECT FIX ..................................p. 32 PIC ORIENTATION...........................p. 40 PictBridge .........................................p. 43 PIXEL MAPPING..............................p. 39 Playback q...............................p. 15, 54 PLAYBACK MENU .......................p. 5, 35 POWER SAVE..................................p. 42 PRINT ORDER...........................p. 36, 46 Protecting images 0 .....................p. 35 PW ON SETUP.................................p. 37 R REC VIEW........................................p. 38 REDEYE...........................................p. 19 REDEYE FIX ....................................p. 32 RESET..............................................p. 31 Resize Q........................................p. 33 Rotating images y...........................p. 35 S Saturation .........................................p. 34 s (SCENE MODE)................p. 17, 28 Self-timer ..........................................p. 21 Sepia.................................................p. 34 Sequential shooting ..........................p. 26 SETUP..............................................p. 37 SHADOW ADJ......................p. 22, 28, 32 Shooting still picture K ...................p. 14 SHUTTER SOUND...........................p. 38 Shutter speed ...................................p. 14 SILENT MODE .................................p. 42 Single-frame shooting.......................p. 26 Sleep mode.......................................p. 50 SLIDESHOW ....................................p. 32 Sound recording R ...............p. 18, 27, 36 SOUND SETTINGS..........................p. 38 SPARKLE EYE .................................p. 33 SPOT (AF MODE) ............................p. 27 Spot n (ESP/n) ..........................p. 27 Strap .................................................p. 10 SUPER MACRO...............................p. 20 U USB Cable..............................p. 2, 43, 48 V VIDEO OUT......................................p. 41 Volume........................................p. 16, 38 W Warning sound 8............................p. 38 WB....................................................p. 26 X xD-Picture Card .......................... p. 11, 56 d4392̲e̲oima̲000̲book̲cs2.indb II d4392̲e̲oima̲000̲book̲cs2.indb II 2008/12/09 17:05:42 2008/12/09 17:05:42
Page: 5
5 EN 1 G SLIDESHOW................ p.32 2 H PERFECT FIX.............. p.32 3 F BEAUTY FIX ................ p.33 4 I EDIT Q (Resize)................. p.33 P (Crop) ..................... p.33 COLOR EDIT ............... p.34 CALENDAR.................. p.34 Menus for Playback, Editing, and Printing Functions When the mode dial is set to the q position, settings can be adjusted. PLAYBACK MENU MENU EXIT SET OK 1 2 4 5 6 7 8 9 3 Playback mode top menu FACE FOCUS .............. p.34 INDEX .......................... p.35 EDIT ............................. p.35 5 J PLAYBACK MENU 0 (Protect) ................ p.35 y (Rotate) ................... p.35 R (Add sound to still images)......................... p.36 6 K ERASE ......................... p.36 7 L PRINT ORDER............. p.36 8 E SETUP* * Same as “Menus for shooting functions” 9 F SILENT MODE............. p.42 1 A IMAGE QUALITY ......... p.25 2 B CAMERA MENU WB................................ p.26 ISO ............................... p.26 DRIVE .......................... p.26 FINE ZOOM ................. p.26 DIGITAL ZOOM............ p.27 ESP/n ....................... p.27 AF MODE..................... p.27 R (Sound recording)..... p.27 IMAGE STABILIZER (Still images)/ DIS MOVIE MODE (Movies)........................ p.28 SHADOW ADJ.............. p.28 3 J SCENE MODE ............. p.28 4 G PANORAMA................. p.29 5 D RESET ......................... p.31 6 E SETUP MEMORY FORMAT/ FORMAT ...................... p.37 BACKUP....................... p.37 W (Language)......... p.37 PW ON SETUP ............ p.37 MENU COLOR............. p.38 SOUND SETTINGS ..... p.38 REC VIEW.................... p.38 FILE NAME .................. p.39 PIXEL MAPPING.......... p.39 s (Monitor)................ p.40 X (Date/time)............. p.40 DUALTIME ................... p.40 PIC ORIENTATION ...... p.40 VIDEO OUT.................. p.41 HDMI ............................ p.42 POWER SAVE ............. p.42 7 F SILENT MODE............. p.42 Menu Index Menus for Shooting Functions When the mode dial is set to a shooting mode position (h K s I n), settings can be adjusted. CAMERA MENU MENU EXIT SET OK 5 1 2 3 7 6 4 Shooting mode top menu d4392̲e̲oima̲000̲book̲cs2.indb 5 d4392̲e̲oima̲000̲book̲cs2.indb 5 2008/12/09 17:06:17 2008/12/09 17:06:17
Page: 6
6 EN Names of Parts 1 Self-timer lamp................................ p.21 2 Connector cover ................. p.41, 43, 48 3 HDMI mini connector ...................... p.41 4 Multi-connector ................... p.41, 43, 48 5 Strap eyelet..................................... p.10 6 Flash............................................... p.19 Camera unit 1 3 2 4 5 6 7 9 8 10 11 7 Battery/card compartment cover......p.11 8 Lens................................................ p.55 9 Microphone..................................... p.36 10 Tripod socket 11 Speaker d4392̲e̲oima̲000̲book̲cs2.indb 6 d4392̲e̲oima̲000̲book̲cs2.indb 6 2008/12/09 17:06:18 2008/12/09 17:06:18
Page: 7
7 EN 5 3 8 6 7 1 2 4 11 12 9 10 1 Shutter button ................................. p.14 2 K button............................ p.14 3 Zoom button.................................... p.19 4 Monitor........................................ p.8, 40 5 Card access lamp........................... p.56 6 m button................................. p.3, 5 7 g/E button (change information display/menu guide/ check date and time) ............ p.3, 13, 21 8 Mode dial .......................................... p.3 9 q button (playback)...................... p.32 10 E button (OK/FUNC) ................. p.3, 22 11 Arrow pad ......................................... p.3 F button (exposure compensation) ................................................... p.20 & button (macro)....................... p.20 Y button (self-timer) .................. p.21 # button (flash).......................... p.19 12 H/S button (panorama/Shadow Adjustment Technology/multi window/ backlight boost/erase)............... p.16, 22 d4392̲e̲oima̲000̲book̲cs2.indb 7 d4392̲e̲oima̲000̲book̲cs2.indb 7 2008/12/09 17:06:18 2008/12/09 17:06:18
Page: 8
8 EN Monitor Shooting mode display M 1 12 2 12M M +2.0 1/30 F3.5 P 4 4 IN ISO 1600 N NORM 1 8 10 11 9 13 15 16 17 12 14 23 22 21 20 19 18 2 5 4 7 6 6 3 +2.0 IN 00:34 V VGA 15 1 1 10 11 9 13 12 14 17 23 20 19 18 2 5 4 7 3 Still image Movie 1 Shooting mode.......................... p.14, 17 2 Flash mode..................................... p.19 3 Silent mode..................................... p.42 4 Image stabilization(still picture)/ Digital image stabilization(movie) ... p.28 5 Macro/super macro......................... p.20 6 Shadow Adjustment Technology .................................................. p.22, 28 7 Battery check.................................. p.10 8 Flash standby/ camera shake warning/ flash charge .................................... p.19 9 AF target mark................................ p.14 10 Recording with sound ............... p.18, 27 11 Dualtime.......................................... p.40 12 Number of storable still pictures/ remaining recording time ................ p.57 13 Current memory.............................. p.57 14 Self-timer ........................................ p.21 15 Aperture value ................................ p.14 16 Shutter speed ................................. p.14 17 Exposure compensation ................. p.20 18 Compression/frame rate ................. p.25 19 Image size ...................................... p.25 20 Metering.......................................... p.27 21 Drive ............................................... p.26 22 ISO.................................................. p.26 23 White balance................................. p.26 d4392̲e̲oima̲000̲book̲cs2.indb 8 d4392̲e̲oima̲000̲book̲cs2.indb 8 2008/12/09 17:06:18 2008/12/09 17:06:18
Page: 9
9 EN Playback mode display 2009.08.26 2009.08.26 12:30 4 4 4 10 IN x x 10 x x 2 11 9 10 8 6 7 11 3 4 5 1 2 3 4 5 1 15 15 16 12 12 13 14 00:14 /00:34 IN V VGA 15 11 3 4 5 1 12 4 4 IN +2.0 +2.0 NORM NORM F3.5 1/1000 ISO ISO 1600 1600 10M 12M 100-0004 100-0004 2008.10.26 2009.08.26 2009.08.26 1 12:30 12:30 12:30 15 10 9 14 13 11 3 4 5 1 12 4 5 IN 100-0004 100-0004 2008.10.26 2009.08.26 2009.08.26 1 12:30 12:30 12:30 MOVIE PLAY OK Still image Movie 1 Silent mode..................................... p.42 2 Print reservation/ number of prints.............................. p.46 3 Recording with sound ......... p.18, 27, 36 4 Protect ............................................ p.35 5 Battery check.................................. p.10 6 Exposure compensation ................. p.20 7 Shutter speed ................................. p.14 8 Aperture value ................................ p.14 9 Image size ...................................... p.25 10 File number..................................... p.39 11 Frame number/elapsed time/ total recording time ................... p.15, 16 12 Current memory.............................. p.57 13 Compression/frame rate ................. p.25 14 White balance................................. p.26 15 Date and time ........................... p.13, 40 16 ISO.................................................. p.26 d4392̲e̲oima̲000̲book̲cs2.indb 9 d4392̲e̲oima̲000̲book̲cs2.indb 9 2008/12/09 17:06:19 2008/12/09 17:06:19
Page: 10
10 EN Preparing the Camera Charging the battery The included battery charger (AC cable type or plug-in type) differs depending on the region where you purchased the camera. If you received a plug-in type battery charger, plug it directly into an AC outlet. Example: AC cable type battery charger 1 2 3 T AC cable AC outlet Lithium-ion battery Charging indicator On: Charging Off: Charged Battery charger Battery comes partially charged. Before use, be sure to charge the battery until the charging indicator light turns off (for approx. 2 hours). If the charging indicator does not light or it blinks, the battery may not be inserted correctly or the battery or the charger may be broken. For details on the battery and the charger, see “Battery and charger” (p. 55). When to charge the battery Charge the battery when the following error message appears: BATTERY EMPTY Monitor top right Error message Flashes in red Attaching the camera strap Pull the strap tight so that it does not come loose. d4392̲e̲oima̲000̲book̲cs2.indb 10 d4392̲e̲oima̲000̲book̲cs2.indb 10 2008/12/09 17:06:20 2008/12/09 17:06:20
Page: 11
11 EN 3 Notch Contact area Insert the card straight in until it clicks into place. Do not touch the contact area directly with your hand. 4 This camera can take pictures using the internal memory when no xD-Picture Card (sold separately) is inserted. “Using an xD- Picture Card” (p. 56) “Number of storable pictures (still pictures)/ continuous recording length (movies) in the internal memory and xD-Picture Card” (p. 57) To remove the xD-Picture Card 1 2 Press in the card until it clicks and comes out slightly. Then grasp the card and pull it out. Loading the battery and the xD-Picture Card™ (sold separately) into the camera Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. 1 Battery/card compartment cover 2 Battery lock knob The battery has a front side and a back side. Insert the battery from T so that the l is in the direction of the battery lock knob. Insert the battery while sliding the battery lock knob in the direction of the arrow. Sliding the battery lock knob in the direction of the arrow to unlock, and then remove the battery. If you insert the battery incorrectly, you will not be able to remove it. Do not use force. Contact authorized distributors/service centers. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Turn off the camera before opening or closing the battery/card compartment cover. d4392̲e̲oima̲000̲book̲cs2.indb 11 d4392̲e̲oima̲000̲book̲cs2.indb 11 2008/12/09 17:06:20 2008/12/09 17:06:20
Page: 12
12 EN Arrow pad and operation guide The symbols 1243, displayed on various settings and movie playback screens indicate that the arrow pad is to be used. 2008.10.26 2008.10.26 12:30 12:30 100-0004 100-0004 00:14 /00:34 00:14 /00:34 IN / 2008 08 26 12 30 OK X Y M D TIME MENU CANCEL SET Y Y M M D D 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 EXPOSURE COMP. Arrow pad 4 2 o 1 p 3 Operation guides displayed at the bottom of the screen indicate that the m button, E button, zoom button, or S button is to be used. 1 4 2 5 3 6 IN OK S MENU BACK GO SEL. IMAGE T W SET OK CAMERA MENU MENU EXIT SET OK Operation guide Using the microSD card/ microSDHC card (sold separately) A microSD card or microSDHC card (hereafter both will be referred to as microSD card) is also compatible with this camera using the microSD Attachment. “Using a microSD Attachment” (p. 58) 1 Insert the microSD card into the microSD Attachment. Insert the card entirely into the microSD Attachment. 2 Insert the microSD Attachment into the camera. Notch To remove the microSD card Pull the card straight out. Do not touch the contact area of the microSD Attachment or microSD card directly with your hand. d4392̲e̲oima̲000̲book̲cs2.indb 12 d4392̲e̲oima̲000̲book̲cs2.indb 12 2008/12/09 17:06:21 2008/12/09 17:06:21
Page: 13
13 EN Changing the display language The language of the menu and error messages displayed on the monitor is selectable. 1 Press the m button, and press LMNO to select [E] (SETUP). SETUP MENU EXIT SET OK 2 Press the E button. 1 2 3 4 BACKUP NORMAL SETUP ENGLISH PW ON SETUP MENU COLOR MEMORY FORMAT MENU EXIT SET OK 3 Use LM to select [W] and press the E button. MENU W OK FRANCAIS DEUTSCH ESPAÑOL ITALIANO ENGLISH ᣣᧄ⺆ ैĜ‫ؗ‬ Ё᭛ ㅔԧ ʑᄽņⅺ̪Ň BACK SET 4 Use LMNO to select your language and press the E button. 5 Press the m button. Setting the date and time The date and time set here are used to image file names, date prints, and other data. 1 Press the K button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. X Y M Y M D D TIME ---- -- -- -- -- MENU CANCEL Date and time setting screen 2 Use LM to select the year for [Y]. 2009 -- -- -- -- X Y M Y M D D TIME MENU CANCEL 3 Press O to save the setting for [Y]. 2009 -- -- -- -- X Y M Y M D D TIME MENU CANCEL 4 As in Steps 2 and 3, use LMNO and the E button to set [M] (month), [D] (day), [TIME] (hours and minutes) and [Y/M/D]. For precise time setting, press the E button as the time signal strikes 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 40) To check the date and time Press the g button while the camera is turned off. The current time is displayed for approx. 3 seconds. ● d4392̲e̲oima̲000̲book̲cs2.indb 13 d4392̲e̲oima̲000̲book̲cs2.indb 13 2008/12/09 17:06:21 2008/12/09 17:06:21
Page: 14
14 EN Shooting, Playback, and Erasing 3 Hold the camera, and compose the shot. 10M 12M P 4 4 IN NORM NORM Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash with your fingers, etc. 4 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. Shutter speed Aperture value AF target mark Press halfway 1/400 F3.5 P “Focusing” (p. 52) ● ● Shooting with optimum aperture value and shutter speed (K mode) In this mode, automatic camera shooting can be used while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance and so on as needed. 1 Set the mode dial to K. 2 Press the K button to turn on the camera. 12 12M M P 4 4 IN NORM NORM Monitor (standby mode screen) Number of storable still pictures (p. 57) Press the K button again to turn off the camera. d4392̲e̲oima̲000̲book̲cs2.indb 14 d4392̲e̲oima̲000̲book̲cs2.indb 14 2008/12/09 17:06:23 2008/12/09 17:06:23
Page: 15
15 EN 5 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Image review screen Press fully 1/400 F3.5 P To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button again or press the shutter button halfway down. To shoot movies “Shooting movies (A mode)” (p. 18) Viewing images 1 Set the mode dial to q. Playback image Frame number 1 1 IN 2009.08.26 2009.08.26 12:30 12:30 2 Use LMNO to select an image. Displays 10 frames before the current image Displays next image Displays previous image Displays 10 frames after the current image The display size of the images can be changed. “Index view, calendar view, and close-up view” (p. 23) To play back movies Select a movie, and press the E button. 2009.08.26 2009.08.26 12:30 12:30 4 4 IN MOVIE PLAY OK MOVIE PLAY OK Movie d4392̲e̲oima̲000̲book̲cs2.indb 15 d4392̲e̲oima̲000̲book̲cs2.indb 15 2008/12/09 17:06:23 2008/12/09 17:06:23
Page: 16
16 EN Operations during movie playback Volume: During playback, press LM. Fast-forward/rewind: Select with NO. Each time a button is pressed, the playback speed cycles through 2×, 20×, and standard (1×) speed in the direction of the pressed button. Pause: Press the E button. 2008.10.26 12:30 100-0004 00:12 /00:34 IN During playback Elapsed time/ Total recording time First (last) frame/frame advance: While paused, press L to display the first frame, and press M to display the last frame. Pressing N makes the camera play back in a reverse motion, and pressing O makes the camera play back normally. Press the E button to resume playback. 2008.10.26 12:30 100-0004 00:14 /00:34 IN During pause To stop movie playback Press the m button. Erasing images during playback (Single image erase) 1 Press the S button when the playback image to be erased is displayed. ERASE ERASE OK IN NO NO YES SET CANCEL MENU 2 Press L to select [YES], and press the E button. [K ERASE] (p. 36) d4392̲e̲oima̲000̲book̲cs2.indb 16 d4392̲e̲oima̲000̲book̲cs2.indb 16 2008/12/09 17:06:24 2008/12/09 17:06:24
Page: 17
17 EN Using the best shooting mode for the scene (s mode) 1 Set the mode dial to s. PORTRAIT SET OK MENU EXIT Press and hold the E button to display a description of the selected mode. 2 Use LM to select the best shooting mode for the scene, and press the E button. 12 12M M 4 4 IN NORM NORM Shooting mode indicator To change to another scene mode, use the menu. [J SCENE MODE] (p. 28) ● Shooting with automatic settings (h mode) The camera automatically selects the best shooting mode for the scene from [PORTRAIT], [LANDSCAPE], [NIGHT+PORTRAIT], [SPORT] and [MACRO]. This is a fully automatic mode that allows you to take a picture suited to the scene by simply pressing the shutter button. Camera menu settings are not available in h mode. 1 Set the mode dial to h. 12 12M M 4 4 IN NORM NORM iAUTO The indicator changes to the icon for the scene mode selected by the camera. Press the shutter button halfway down or press the g button to check which shooting mode the camera has automatically selected. Depending on the shooting scene, the camera may not select the intended shooting mode. If the camera cannot determine the best shooting mode, the picture will be taken in K mode. ● Using Shooting Modes d4392̲e̲oima̲000̲book̲cs2.indb 17 d4392̲e̲oima̲000̲book̲cs2.indb 17 2008/12/09 17:06:24 2008/12/09 17:06:24
Page: 18
18 EN Smoothing out skin tone and texture (I mode) The camera finds a person’s face and gives the skin a smooth, translucent look for taking the picture. 1 Set the mode dial to I. 12M 12M 4 4 IN NORM NORM I mode indicator 2 Point the camera toward the subject. Check the frame appearing around the face detected by the camera, and then press the shutter button to take the picture. The unedited image and edited image are both saved. If the image cannot be retouched, only the unedited image is saved. The frame may not appear or may take some time to appear for some subjects. In addition, this function may have no visible effect on some subjects. The [IMAGE SIZE] of the retouched image is limited to [J] or lower. ● ● Shooting movies (n mode) Audio is recorded simultaneously. 1 Set the mode dial to n. A mode indicator 00:34 00:34 IN 15 15 Using the zoom You cannot use the optical zoom while shooting a movie. Please use the [DIGITAL ZOOM] (p. 27) 2 Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording. Press halfway Press fully 00:34 REC Lights red during shooting Remaining recording time (p. 57) 3 Gently press the shutter button all the way down to stop recording. d4392̲e̲oima̲000̲book̲cs2.indb 18 d4392̲e̲oima̲000̲book̲cs2.indb 18 2008/12/09 17:06:25 2008/12/09 17:06:25
Page: 19
19 EN Using the flash The flash functions can be selected to best match the shooting conditions and render the desired image. 1 Press the # button. P OK OK AUTO SET FLASH AUTO AUTO ! # $ 2 Use NO to select the setting option, and press the E button to set. Item Description FLASH AUTO The flash fires automatically in low- light or backlight conditions. REDEYE Pre-flashes are emitted to reduce the occurrence of red-eye in your photos. FILL IN The flash fires regardless of the available light. FLASH OFF The flash does not fire. Using the optical zoom Pressing the zoom button adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button Zoom bar 12M 12M P 4 4 IN NORM NORM 12M 12M P 4 4 IN NORM NORM Optical zoom: 7× / Digital zoom: 5× Use of [IMAGE STABILIZER] (still images)/ [DIS MOVIE MODE] (movies) (p. 28) is recommended when shooting with the telephoto zoom. To take larger images without reducing image quality [FINE ZOOM] (p. 26) To take larger images [DIGITAL ZOOM] (p. 27) The zoom bar appearance identifies the status of the fine zoom/digital zoom. Fine zoom range Digital zoom range When using optical zoom When using fine zoom When using digital zoom Optical zoom range Using Shooting Functions d4392̲e̲oima̲000̲book̲cs2.indb 19 d4392̲e̲oima̲000̲book̲cs2.indb 19 2008/12/09 17:06:25 2008/12/09 17:06:25
Page: 20
20 EN Adjusting the brightness (Exposure compensation) The exposure value automatically set by the camera can be adjusted brighter or darker to obtain a desired shot. This function is not available in the h shooting mode. 1 Press the F button. 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 EXPOSURE COMP. Exposure compensation value 2 Use LMNO to select the image showing the desired brightness, and then press the E button. Shooting close-ups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Press the & button. P OK OK SET OFF OFF % & OFF 2 Use NO to select the setting option, and press the E button to set. Item Description OFF Macro mode is deactivated. MACRO This enables shooting as close as 10 cm/3.9 in.*1 (60 cm/23.6 in.*2 ) to the subject. SUPER MACRO*3 This enables shooting as close as 2 cm/0.8 in. to the subject. Subjects at 70 cm/27.6 in. or farther cannot be brought into focus. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 19) and zoom (p. 19) cannot be set in super macro mode. d4392̲e̲oima̲000̲book̲cs2.indb 20 d4392̲e̲oima̲000̲book̲cs2.indb 20 2008/12/09 17:06:26 2008/12/09 17:06:26
Page: 21
21 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a time delay. 1 Press the Y button. OFF OFF P OK OK 12 12M M NORM NORM SET SET SELFTIMER SELFTIMER OFF ON Y 2 Use LM to select the setting option, and press the E button to set. Item Description OFF This cancels the self-timer. ON The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the Y button again. Changing the shooting information display The display of shooting information on the monitor can be changed to best match the situation; for example, the information can be removed if there is a need for a clear view of the subject or a grid can be displayed to assit with precise composition. 1 Press the g button. The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 8) 12 12M M +2.0 +2.0 P 4 4 IN ISO 1600 ISO 1600 NORM NORM 12M 12M +2.0 +2.0 P 4 4 IN ISO 1600 ISO 1600 NORM NORM 12M 12M +2.0 +2.0 P 4 4 IN ISO 1600 ISO 1600 NORM NORM Normal No information Histogram Grid Reading a histogram If the peak fills too much of the frame, the image will appear mostly white. If the peak fills too much of the frame, the image will appear mostly black. The green section shows luminance distribution within the screen’s center. ● d4392̲e̲oima̲000̲book̲cs2.indb 21 d4392̲e̲oima̲000̲book̲cs2.indb 21 2008/12/09 17:06:26 2008/12/09 17:06:26
Page: 22
22 EN Using the FUNC menu The FUNC menu provides the following menu functions that can be quickly accessed, adjusted and set. [WB] (p. 26) • [ESP/n] (p. 27) • [ISO] (p. 26) • [A IMAGE QUALITY] (p. 25) • [DRIVE] (p. 26) • 1 Press the E button while ready to take a picture. 12M 12M ISO AUTO ISO AUTO WB AUTO WB AUTO ESP ESP NORM NORM P n ESP ESP ESP 2 Use LM to select the menu function and NO to select the setting option, and then press the E button to set. Quickly calling and using shooting functions The following menu functions can be quickly called and used. [PANORAMA] (p. 29) [SHADOW ADJ] (p. 28) [MULTI WINDOW] (p. 22) 1 Press the H button. PANORAMA 2 Use NO to select the menu function, and press the E button to set. To use the effects preview screen (Multi window) Selecting an option from [ZOOM], [EXPOSURE COMP.], [WB] or [ESP/n] shows 4 preview images that reflect the adjusted values of the selected shooting function. Use LMNO to select the desired image, and press the E button. Brightening the monitor (Backlight boost) Pressing and holding the H button brightens the monitor. The monitor returns to the original brightness if no operation is performed for 10 seconds. ● ● ● d4392̲e̲oima̲000̲book̲cs2.indb 22 d4392̲e̲oima̲000̲book̲cs2.indb 22 2008/12/09 17:06:27 2008/12/09 17:06:27
Page: 23
23 EN Index view, calendar view, and close-up view Index view and calendar view enable quick selection of a target image. Close-up view (up to 10x magnification) allows checking of image details. 1 Press the zoom button. Single-image view Closeup view 11 11 IN 2009.08.26 2009.08.26 12:30 12:30 2009.08.26 2009.08.26 11 IN 12:30 12:30 W W W T T T Index view Calendar view 2009 AUG SU M TU W TH F 2 3 4 5 6 7 8 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 29 23 24 25 30 31 26 27 28 SA 8 2009 AUG SU M TU W TH F 2 3 4 5 6 7 8 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 29 23 24 25 30 31 26 27 28 SA 8 To select an image in index view Use LMNO to select an image, and press the E button to display the selected image in single-image view. To select images in calendar view Use LMNO to select a date, and press the E button to view the images taken on the selected date. To scroll an image in close-up view Use LMNO to move the viewing area. Changing the image information display A set of shooting information displayed on the screen can be changed. 1 Press the g button. The displayed image information changes in the order shown below each time the button is pressed. 10M NORM 100-0004 10 100-0004 M NORM 2009.08.26 2009.08.26 12:30 12:30 4 4 IN 4 4 IN +2.0 +2.0 NORM NORM F3.5 1/1000 ISO 400 ISO 400 M 12M 100-0004 100-0004 2009.08.26 2009.08.26 1 12:30 12:30 12:30 Normal Histogram No information “Reading a histogram” (p. 21) ● Using Playback Features d4392̲e̲oima̲000̲book̲cs2.indb 23 d4392̲e̲oima̲000̲book̲cs2.indb 23 2008/12/09 17:06:27 2008/12/09 17:06:27
Page: 24
24 EN Playing back panorama images Panorama images that were combined together using [COMBINE IN CAMERA 1] or [COMBINE IN CAMERA 2] can be scrolled for viewing. [G PANORAMA] (p. 29) 1 Select a panorama image during playback. “Viewing images” (p. 15) NORM NORM 100-0003 100-0003 2009.08.26 12:30 2 2 2 Press the E button. Current viewing area To control panorama image playback Zoom in/Zoom out: Press the zoom button. Playback direction: Press LMNO to scroll in the direction of the pressed button. Pause: Press the E button. Restart scrolling: Press the E button. Stop playback: Press the m button. d4392̲e̲oima̲000̲book̲cs2.indb 24 d4392̲e̲oima̲000̲book̲cs2.indb 24 2008/12/09 17:06:28 2008/12/09 17:06:28
Page: 25
25 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Menus for Shooting Functions When the mode dial is set to a shooting mode (h K s I A), settings can be adjusted. The icon next to indicates the position to adjust the mode dial to when setting functions. The default settings of the function are highlighted in . Selecting the appropriate image quality for your application [A IMAGE QUALITY] A IMAGE QUALITY : h K s I A Still images Submenu 1 Submenu 2 Application IMAGE SIZE 12M (3968×2976) Suitable for printing pictures over A3 (11×17 in.). 5M (2560×1920) Suitable for printing pictures at A4 (8.5×11 in.). 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing pictures at A5 (5×7 in.). 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures on emails and web sites. 16:9G (3968×2232) Suitable for conveying the expansiveness of subjects such as landscapes and utilizing the entire screen for viewing pictures on a widescreen TV. Also used for printing pictures at A3 (11×17 in.). 16:9F (1920×1080) Suitable for conveying the expansiveness of subjects such as landscapes and utilizing the entire screen for viewing pictures on a widescreen TV. Also used for printing pictures at A5 (5×7 in.). COMPRESSION FINE Shooting at high quality. NORMAL Shooting at normal quality. Movies Submenu 1 Submenu 2 Application IMAGE SIZE VGA Sets image size to 640 × 480. Allows for full-screen television display. QVGA Sets image size to 320 × 240. FRAME RATE N 30fps*1 Allows for a smoother image. For prioritizing image quality when shooting. O 15fps*1 Setting for shooting with standard image quality. For prioritizing movie length when shooting. *1 frames per second “Number of storable pictures (still pictures)/continuous recording length (movies) in the internal memory and xD-Picture Card” (p. 57) d4392̲e̲oima̲000̲book̲cs2.indb 25 d4392̲e̲oima̲000̲book̲cs2.indb 25 2008/12/09 17:06:28 2008/12/09 17:06:28
Page: 26
26 EN Adjusting to a natural color scheme [WB] B CAMERA MENU X WB : K s I A Submenu 2 Application AUTO The camera automatically adjusts the white balance according to the shooting conditions. 5 For shooting outdoors under a clear sky 3 For shooting outdoors under a cloudy sky 1 For shooting under tungsten lighting w For shooting under daylight fluorescent lighting (household lighting, etc.) x For shooting under neutral fluorescent lighting (desk lamps, etc.) y For shooting under white fluorescent lighting (offices, etc.) Selecting the ISO sensitivity [ISO] B CAMERA MENU X ISO : K Although lower ISO values reduce sensitivity, sharp images can be taken under fully lit conditions. Larger values increase sensitivity so that images can be taken at fast shutter speeds even under dimly lit conditions. However, high sensitivity introduces electronic noise into the resulting picture, which may give it a grainy appearance. Submenu 2 Application AUTO The camera automatically adjusts the sensitivity according to the shooting conditions. HIGH ISO AUTO The camera uses a higher sensitivity compared to [AUTO] to minimize blur caused by a moving subject or by camera shake. 64/100/200/400/ 800/1600 Set ISO sensitivity to a numerical value. Shooting pictures sequentially while the shutter button is held down [DRIVE] B CAMERA MENU X DRIVE : K s Submenu 2 Application o One frame is shot each time the shutter button is pressed. j*1 Take sequential shots using the focus and brightness (exposure and white balance) set in the first frame. c The camera takes sequential shots at a faster speed than in [j]. d The camera takes sequential shots at approximately 11 frames/sec. *1 The shooting speed varies depending on the settings for [A IMAGE QUALITY] (p. 25). When set to [j], the flash (p.19) cannot be set to [REDEYE]. In addition, when set to [c], the flash is limited to either # or $. When set to [d], the flash is fixed to $. When set to [c] or [d], [IMAGE SIZE] is limited to [I] or lower, and [ISO] is fixed to [AUTO]. Moreover, [FINE ZOOM] (p. 26) and [DIGITAL ZOOM] (p. 27) are not available. When set to [j], [c], or [d], [R] (sound recording) (p. 27) is not available. Shooting at higher magnifications than optical zoom without reducing the image quality [FINE ZOOM] B CAMERA MENU X FINE ZOOM : K s I Submenu 2 Application OFF Only optical zoom is used to zoom in for shooting. ON Optical zoom and image cropping are combined to zoom in for shooting (Approx. 43× (max.)). This function will not reduce image quality because it does not convert images with fewer pixels into images with more pixels by adding pixels to a cropped image. When set to [ON], [IMAGE SIZE] is limited to [H] or lower. This setting is not available when [DIGITAL ZOOM] is set to [ON]. This function is not available when [% SUPER MACRO] (p. 20) is selected. d4392̲e̲oima̲000̲book̲cs2.indb 26 d4392̲e̲oima̲000̲book̲cs2.indb 26 2008/12/09 17:06:29 2008/12/09 17:06:29
Page: 27
27 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Shooting at higher magnifications than optical zoom [DIGITAL ZOOM] B CAMERA MENU X DIGITAL ZOOM : K s I A Submenu 2 Application OFF Only optical zoom is used to zoom in for shooting. ON Optical zoom and digital zoom are combined to zoom in for shooting (Approx. 35× (max.)). The setting is not available when [FINE ZOOM] is set to [ON]. This function is not available when [% SUPER MACRO] (p. 20) is selected. Selecting the method for measuring the brightness [ESP/n] B CAMERA MENU X ESP/n : K s A Submenu 2 Application ESP Shoots to obtain a balanced brightness over the entire screen (Meters the brightness at the center and surrounding areas of the screen separately). 5 (spot) Shoots the subject at the center during backlighting. When set to [ESP], the center may appear dark when shooting against strong backlighting. Selecting the focusing area [AF MODE] B CAMERA MENU X AF MODE : K s Submenu 2 Application FACE DETECT*1 This is used for taking pictures of people (The camera automatically detects a face and a frame appears. Press the shutter button halfway down, and when the face is in focus, the green AF target mark appears. The orange target mark indicates that the area other than the face is in focus). iESP This enables you to compose the shot without worrying about the focusing position. The camera finds the subject to focus on and automatically adjusts the focus. SPOT The camera focuses on the subject located within the AF target mark. *1 For some subjects, the frame may not appear or may take some time to appear. Recording sound when shooting still images [R] B CAMERA MENU X R : K s Submenu 2 Application OFF No sound is recorded. ON The camera automatically starts recording for approx. 4 seconds after taking the picture. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 6) at the source of the sound you want to record. d4392̲e̲oima̲000̲book̲cs2.indb 27 d4392̲e̲oima̲000̲book̲cs2.indb 27 2008/12/09 17:06:29 2008/12/09 17:06:29
Page: 28
28 EN Reducing the blur caused by the camera shake when shooting [IMAGE STABILIZER] (still images) / [DIS MOVIE MODE] (movies) B CAMERA MENU X IMAGE STABILIZER / DIS MOVIE MODE : K s I A Submenu 2 Application OFF The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. ON The image stabilizer is activated. The camera’s default settings are [IMAGE STABILIZER] (still images) to [ON] and [DIS MOVIE MODE] (movies) to [OFF]. There may be a noise coming from inside the camera when the shutter button is pressed with [IMAGE STABILIZER] (still images) set to [ON]. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking still shots or taking pictures at night, the stabilizer may not be as effective. When shooting while the [DIS MOVIE MODE] (movie) is set to [ON], the image will be enlarged somewhat before saving. Brightening the subject against backlight [SHADOW ADJ] B CAMERA MENU X SHADOW ADJ : K s I A Submenu 2 Application OFF Shoots without using [SHADOW ADJ]. ON The camera finds a person’s face that has been darkened by backlight and makes it appear brighter for taking the picture. (Point the camera toward the subject. Check the frame that appears around the face detected by the camera, and then press the shutter button to take the picture.) For some subjects, the frame may not appear or may take some time to appear. When set to [ON], [ESP/n] (p. 27) is automatically fixed to [ESP], and [AF MODE] (p. 27) is automatically fixed to [FACE DETECT]. Selecting a scene mode according to the shooting situation [J SCENE MODE] J SCENE MODE : s In s mode, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, settings may not be changed in some modes. Submenu 1 Application BPORTRAIT/ FLANDSCAPE/ GNIGHT SCENE*1 / MNIGHT+PORTRAIT/ CSPORT/NINDOOR/ WCANDLE/ RSELF PORTAIT/ SSUNSET*1 / XFIREWORKS*1 /VCUISINE/ dDOCUMENTS/ NSMILE SHOT*2 / qBEACH & SNOW/ YPRE-CAPTURE MOVIE The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which no other pictures can be taken. *2 The focus is locked at the first frame. Shooting with a selected scene “Using the best shooting mode for the scene (s mode)” (p. 17) Detecting a smiling face to release the shutter automatically ([N SMILE SHOT] mode) 1 Select [N SMILE SHOT], and aim the camera toward the subject. The self-timer lamp turns on. When a smiling face is detected, the camera automatically takes 3 sequential shots. Pictures can also be taken manually by pressing the shutter button. The camera may not be able to detect a smiling face for some subjects. [IMAGE SIZE] is limited to [I] or lower. ● d4392̲e̲oima̲000̲book̲cs2.indb 28 d4392̲e̲oima̲000̲book̲cs2.indb 28 2008/12/09 17:06:30 2008/12/09 17:06:30
Page: 29
29 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Capturing the perfect moment when shooting ([YPRE-CAPTURE MOVIE] mode) 1 Use LM to select [YPRE-CAPTURE MOVIE], and press the E button to set. This function is ready for shooting immediately after setting this option. 2 Press the shutter button to start movie shooting. After shooting stops, the camera saves a 7-second movie, including up to 2 seconds of recording time taken before the shutter button was pressed, to the memory card. The optical zoom and auto focus function are available during movie recording. Sound is not recorded. The AF target mark is not displayed. Select [IMAGE SIZE] from [VGA] or [QVGA], and select [FRAME RATE] from [30fps] or [15fps]. ● ● ● Creating panoramic images [G PANORAMA] G PANORAMA : K s Submenu 2 Application COMBINE IN CAMERA 1*1 Three frames are taken and combined by the camera. The user only composes the shots so that the target marks and pointers overlap, and the camera automatically releases the shutter. The shooting functions are already preset to the optimum settings for panoramic shooting. COMBINE IN CAMERA 2 Three frames are taken and combined by the camera. The user composes the shots using the guide frame and manually releases the shutter. COMBINE IN PC The frames that were taken are combined into a panorama image using the OLYMPUS Master 2 software from the provided CD-ROM. Pictures are taken in the last [ISO] or [J SCENE MODE] settings. (Excluding certain scene modes.) *1 Not available in s mode (p. 17). The [A IMAGE QUALITY] (p. 25) setting cannot be changed. The focus, exposure (p. 20), zoom position (p. 19), and [WB] (p. 26) are locked at the first frame. The flash (p. 19) is fixed to $ (FLASH OFF) mode. “Playing back panorama images” (p. 24) d4392̲e̲oima̲000̲book̲cs2.indb 29 d4392̲e̲oima̲000̲book̲cs2.indb 29 2008/12/09 17:06:31 2008/12/09 17:06:31
Page: 30
30 EN Taking pictures with [COMBINE IN CAMERA 1] 1 Press the shutter button to take the first frame. 2 Move the camera slightly in the direction of the second frame. SAVE OK MENU CANCEL Target mark Pointer Screen when combining images from left to right 3 Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap. The camera releases the shutter automatically. SAVE OK MENU CANCEL To combine only two pictures, press the E button before taking a third frame. 4 Repeat Step 3 to take a third frame. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To exit the panorama function without saving an image, press the m button. If the shutter does not automatically release, try [COMBINE IN CAMERA 2] or [COMBINE IN PC]. ● ● Taking pictures with [COMBINE IN CAMERA 2] 1 Use NO to specify at which edge the next picture is to be connected. MENU CANCEL Direction for combining the next frame 2 Press the shutter button to take the first frame. A guide frame appears as a reference. 1st frame MENU CANCEL MENU CANCEL Guide frame Joint area 3 Compose the next shot so that the joint area overlaps the guide frame. Composition of the 2nd frame OK SAVE MENU CANCEL 4 Press the shutter button to take the next shot. To combine only two pictures, press the E button before taking the third frame. 5 Repeat steps 3 and 4 to take a third frame. After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed. To exit the panorama function without saving an image, press the m button. ● ● d4392̲e̲oima̲000̲book̲cs2.indb 30 d4392̲e̲oima̲000̲book̲cs2.indb 30 2008/12/09 17:06:31 2008/12/09 17:06:31
Page: 31
31 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Taking pictures with [COMBINE IN PC] 1 Use LMNO to select the direction that the frames are combined. 2 Press the shutter button to take the first frame, and then compose the second shot. Compose the shot using the guide frame so that the two adjacent frames overlap. 3 Repeat Step 2 until the number of required frames are taken, and then press the E button when done. When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is possible for up to 10 frames. Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images. ● Restoring the shooting functions to the default settings [D RESET] D RESET : h K s I A Submenu 1 Application YES Restores the following menu functions to the default settings: Flash (p. 19) Exposure compensation (p. 20) Macro (p. 20) Self-timer (p. 21) [A IMAGE QUALITY] (p. 25) [G PANORAMA] (p. 29) [J SCENE MODE] (p. 28) Shooting information display (p. 21) Menu functions in [B CAMERA MENU] (p. 25 to 31) • • • • • • • • • NO The current settings are not changed. d4392̲e̲oima̲000̲book̲cs2.indb 31 d4392̲e̲oima̲000̲book̲cs2.indb 31 2008/12/09 17:06:31 2008/12/09 17:06:31
Page: 32
32 EN Menus for Playback, Editing, and Printing Functions When the mode dial is set to q, settings can be adjusted during image playback. Playing back pictures automatically [G SLIDESHOW] G SLIDESHOW Submenu 1 Submenu 2 Submenu 3 Application ALL/STILL PICTURE/MOVIE/ CALENDAR NORMAL/ NEXT PAGE 1/ NEXT PAGE 2/ FLIP/SWIVEL/ ZOOM UP/ SLIDE/FADER/ CHECKERBOARD/ BLINDS/RANDOM OFF/STANDARD/ SPEED/CYBER/ AQUA/SHINY Selects, respectively, the content to be included in the slideshow, the type of transition effect used between slides, and the background music options. To start a slideshow The slideshow starts after confirming [BGM] settings and pressing the E button. To stop the slideshow, press the E button or the m button. Retouching images [H PERFECT FIX] H PERFECT FIX Edited or retouched images cannot be retouched again. Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1 Application ALL [SHADOW ADJ] and [REDEYE FIX] are applied together. SHADOW ADJ Only sections darkened by backlighting and dim lighting are brightened. REDEYE FIX Eyes that are reddened by the flash are corrected. 1 Select a correction item using LM and press the E button. 2 Use NO to select an image for retouching, and press the E button. The retouched image is saved as a separate image. ● d4392̲e̲oima̲000̲book̲cs2.indb 32 d4392̲e̲oima̲000̲book̲cs2.indb 32 2008/12/09 17:06:31 2008/12/09 17:06:31
Page: 33
33 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Retouching the skin and eyes [F BEAUTY FIX] F BEAUTY FIX Depending on the picture, the editing may not be effective. Submenu 1 Submenu 2 Application ALL ― [CLEAR SKIN], [SPARKLE EYE] and [DRAMATIC EYE] are applied together. CLEAR SKIN SOFT/AVG/ HARD Makes skin look smooth and translucent. Select the correction effect from 3 levels. SPARKLE EYE ― Enhances the contrast of the eyes. DRAMATIC EYE ― Enlarges the subject’s eyes. 1 Use LM to select a correction item, and press the E button. 2 Use NO to select an image for retouching, and press the E button. The retouched image is saved as a separate image. When [CLEAR SKIN] is selected Use LM to select the retouching level, and press the E button. CLEAR SKIN SOFT AVG HARD MENU BACK SET OK ● Changing the image size [Q] I EDIT X Q Submenu 2 Application C 640 × 480 This saves a lower-resolution copy of the selected image for use in e-mail attachments and other applications. E 320 × 240 1 Use NO to select an image and press the E button. 2 Use LM to select an image size and press the E button. The resized image is saved as a separate image. Cropping a picture [P] I EDIT X P 1 Use NO to select an image, and press the E button. 2 Use the zoom button to select the size of the cropping frame, and use LMNO to move the frame. T W SET OK Cropping frame 3 Press the E button after you have selected the area to trim. The edited image is saved as a separate image. ● ● d4392̲e̲oima̲000̲book̲cs2.indb 33 d4392̲e̲oima̲000̲book̲cs2.indb 33 2008/12/09 17:06:32 2008/12/09 17:06:32
Page: 34
34 EN Changing the color tone of image [COLOR EDIT] I EDIT X COLOR EDIT Submenu 2 Application Black & white This changes the image to black and white. Sepia This changes the image to a sepia tone. Saturation (hard) This increases the color saturation of the image. Saturation (soft) This slightly increases the color saturation of the image. Black & white COLOR EDIT Sepia Saturation (hard) Saturation (soft) 1 Use LMNO to select the desired color, and press the E button. The image with the selected color is saved as a separate image. ● Adding a calendar to an image [CALENDAR] I EDIT X CALENDAR OK CALENDAR SET 1 Use NO to select an image, and press the E button. 2 Use NO to select a calendar. Use LM to select the image orientation, and then press the E button. 3 Use LM to select the Year of the calendar, and press O. 4 Use LM to select the Month of the calendar, and press the E button. The edited image is saved as a separate image. Highlighting a face with blurry effect around it [FACE FOCUS] I EDIT X FACE FOCUS A face that is largest and facing front in the picture is detected as a target. In some images, such target may not be detected, and editing cannot be performed. 1 Use NO to select an image, and press the E button. The edited image is saved as a separate image. ● ● d4392̲e̲oima̲000̲book̲cs2.indb 34 d4392̲e̲oima̲000̲book̲cs2.indb 34 2008/12/09 17:06:32 2008/12/09 17:06:32
Page: 35
35 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Creating an index of 9 frames from a movie [INDEX] I EDIT X INDEX INDEX SET OK MENU BACK 1 Use NO to select a movie, and press the E button. 2 Use LMNO to select the first frame, and press the E button. 3 Use LMNO to select the last frame, and press the E button. Nine frames are extracted from a movie and saved as a new still image (INDEX). Extracting a clip from a movie [EDIT] I EDIT X EDIT Submenu 2 Application NEW FILE The original movie is left unchanged, and a clip from the movie is saved as a separate movie. OVERWRITE A portion of the original movie overwrites and replaces the original movie. 1 Use NO to select a movie. 2 Use LM to select either [NEW FILE] or [OVERWRITE] and press the E button. 3 Use NO to select the first frame of the clip to be extracted, and press the E button. While selecting the first or last frame, pressing LM moves to the first/last frame of the movie. 4 Use NO to select the last frame of the clip to be extracted, and press the E button. The extracted movie clip is saved. ● ● ● Protecting images [0] J PLAYBACK MENU X 0 Protected images cannot be erased by [ERASE] (p. 16), [SEL. IMAGE], or [ALL ERASE] (p. 36), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 37). Submenu 2 Application OFF Images can be erased. ON Images are protected so that they cannot be erased except by formatting of the internal memory/ card. 1 Use NO to select an image. 2 Use LM to select [ON]. 3 If necessary, repeat Steps 1 and 2 to protect other images. 4 Press the E button. Rotating images [y] J PLAYBACK MENU X y Submenu 2 Application U +90° The image is rotated 90° clockwise. V 0° The image is not rotated. t –90° The image is rotated 90° counter-clockwise. 1 Use NO to select an image. 2 Use LM to select the rotation direction. 3 If necessary, repeat Steps 1 and 2 to protect other images. 4 Press the E button. The new picture orientations will be saved even after the power is turned off. d4392̲e̲oima̲000̲book̲cs2.indb 35 d4392̲e̲oima̲000̲book̲cs2.indb 35 2008/12/09 17:06:32 2008/12/09 17:06:32
Page: 36
36 EN Adding sound to still images [R] J PLAYBACK MENU X R Submenu 2 Application YES The camera adds (records) sound for approx. 4 seconds while playing back the image. This is useful for recording notes or comments about the image. NO No sound is recorded. 1 Use NO to select an image. 2 Aim the microphone toward the sound source. Microphone 3 Use LM to select [YES], and press the E button. Recording starts. ● Erasing images [K ERASE] K ERASE Before erasing, check that no important data is left in the internal memory or card. Submenu 1 Application SEL. IMAGE Images are individually selected and erased. ALL ERASE All images in the internal memory or card are erased. When erasing pictures in the internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. To individually select and erase images [SEL. IMAGE] 1 Use LM to select [SEL. IMAGE], and press the E button. 2 Use LMNO to select the image to be erased, and press the E button to add a R mark to the image. 1 4 2 5 3 6 IN OK S MENU BACK GO SEL. IMAGE R mark 3 Repeat Step 2 to select the images to be erased, and then press the S button to erase the selected images. 4 Use LM to select [YES], and press the E button. The images with a R mark are erased. To erase all images [ALL ERASE] 1 Use LM to select [ALL ERASE], and press the E button. 2 Use LM to select [YES], and press the E button. Saving print settings to the image data [L PRINT ORDER] L PRINT ORDER “Print Reservations (DPOF)” (p. 46) Print reservation can be set only for still images that are recorded to the card. ● d4392̲e̲oima̲000̲book̲cs2.indb 36 d4392̲e̲oima̲000̲book̲cs2.indb 36 2008/12/09 17:06:33 2008/12/09 17:06:33
Page: 37
37 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Menus for Other Camera Settings These settings can be made from the shooting mode top menu or playback mode top menu. Erasing data completely [MEMORY FORMAT]/[FORMAT] E SETUP X MEMORY FORMAT/FORMAT Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2 Application YES Completely erases the image data in the internal memory*1 or card (including protected images). NO Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images from the internal memory to the card [BACKUP] E SETUP X BACKUP Submenu 2 Application YES Backs up image data from the internal memory to the card. NO Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup, or use an AC adapter. Changing the display language [W] E SETUP X W “Changing the display language” (p. 13) Submenu 2 Application Languages*1 The language for the menus and error messages displayed on the monitor is selected. *1 The available languages vary depending on the country and/or region where the camera was purchased. Setting the startup display screen and sound when the camera is turned on [PW ON SETUP] E SETUP X PW ON SETUP Submenu 2 Submenu 3 Application SCREEN OFF No image is displayed. 1 A preset image*1 is displayed. 2 A still image stored in the internal memory or card is registered for display. (This option leads to the setup screen.) VOLUME OFF (No sound)/LOW/ HIGH The volume of the startup sound is selected. *1 This image cannot be changed. To register a startup image 1 Select [2] in submenu 3 for [SCREEN]. 2 Use NO to select the image to be registered, and press the E button. d4392̲e̲oima̲000̲book̲cs2.indb 37 d4392̲e̲oima̲000̲book̲cs2.indb 37 2008/12/09 17:06:33 2008/12/09 17:06:33
Page: 38
38 EN Selecting the menu screen color and background [MENU COLOR] E SETUP X MENU COLOR Submenu 2 Application NORMAL/COLOR 1/ COLOR 2/COLOR 3 Selects the menu screen color or background image according to your preference. Selecting the camera sound and its volume [SOUND SETTINGS] E SETUP X SOUND SETTINGS Submenu 2 Submenu 3 Submenu 4 Application BEEP SOUND TYPE 1/2 Selects the operating sound and volume of the camera buttons (except the shutter button). VOLUME OFF (No sound)/ LOW/HIGH SHUTTER SOUND SOUND TYPE 1/2/3 Selects the shutter sound and volume. VOLUME OFF (No sound)/ LOW/HIGH 8 OFF (No sound)/ LOW/HIGH — Adjusts the warning sound volume. q VOLUME OFF (No sound) or 5 volume levels — Adjusts the image playback volume. To turn off all sounds at once, make the setting from [F SILENT MODE] (p. 42). Viewing the image immediately after shooting [REC VIEW] E SETUP X REC VIEW Submenu 2 Application OFF The image being recorded is not displayed. This allows the user to prepare for the next shot while following the subject in the monitor after shooting. ON The image being recorded is displayed. This allows the user to make a brief check of the image that was just taken. Even when set to [ON], you can resume shooting while the image is being displayed. d4392̲e̲oima̲000̲book̲cs2.indb 38 d4392̲e̲oima̲000̲book̲cs2.indb 38 2008/12/09 17:06:33 2008/12/09 17:06:33
Page: 39
39 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Resetting the file names of pictures [FILE NAME] E SETUP X FILE NAME Month: 1 to C (A=October, B=November, C=December) Day: 01 to 31 Pmdd Folder name Folder name File name DCIM 100OLYMP 999OLYMP Pmdd0001.jpg Pmdd9999.jpg Automatic numbering Automatic numbering Submenu 2 Application RESET This resets the sequential number for the folder name and file name whenever a new card is inserted.*1 This is useful when grouping images on separate cards. AUTO Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001. Adjusting the CCD and adjusting the image processing function [PIXEL MAPPING] E SETUP X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the E button when [START] (submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. ● d4392̲e̲oima̲000̲book̲cs2.indb 39 d4392̲e̲oima̲000̲book̲cs2.indb 39 2008/12/09 17:06:34 2008/12/09 17:06:34
Page: 40
40 EN Adjusting the brightness of the monitor [s] E SETUP X s To adjust the monitor brightness 1 Use LM to adjust the brightness while viewing the screen, and then press the E button. s SET OK MENU BACK Setting the date and time [X] E SETUP X X “Setting the date and time” (p. 13) To select the date and time display order 1 Press O after setting Minute, and use LM to select the date display order. 2009 08 26 12 30 X Y M Y M D D TIME MENU CANCEL Date order Setting the date and time for another time zone [DUALTIME] E SETUP X DUALTIME When [DUALTIME] is set to [ON], the date and time set here are used in image file names, dated prints and other data. Submenu 2 Submenu 3 Application OFF — Switches to the date and time set in [X]. ON (Proceeds to the setting screen*1 .) The date and time settings from [DUALTIME] are used in file names, dated prints and other data. *1 The setting procedure is identical to that in “Setting the date and time” (p. 13). The date display order is the same as that set with [X]. Automatically rotating images shot with the camera in a vertical position during playback [PIC ORIENTATION] E SETUP X PIC ORIENTATION During shooting, the [y] (p.35) setting on the playback menu is set automatically. This function may not work properly if the camera is facing upwards or downwards during shooting. Submenu 2 Application OFF Information about the vertical/ horizontal orientation of the camera during shooting is not recorded with images. Images shot with the camera in a vertical position are not rotated during playback. ON Information about the vertical/ horizontal orientation of the camera during shooting is recorded with images. Images are automatically rotated during playback. d4392̲e̲oima̲000̲book̲cs2.indb 40 d4392̲e̲oima̲000̲book̲cs2.indb 40 2008/12/09 17:06:34 2008/12/09 17:06:34
Page: 41
41 EN Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions. Selecting the video signal system to match your TV [VIDEO OUT] E SETUP X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC The camera is compatible with TVs in North America, Taiwan, Korea, Japan and others. PAL The camera is compatible with TVs in Europe, China and others. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Connect the TV and camera. Connection via AV cable Connect to the TV video input jack (yellow) and audio input jack (white). Multi-connector A/V cable (supplied) Connector cover Open the connector cover in the direction of the arrow. Connection via HDMI cable Connect to the HDMI connector on the TV. Connector cover Open the connector cover in the direction of the arrow. HDMI mini connector HDMI cable (commercially available) 2 Use the camera to select the video signal format that matches that of the connected TV ([NTSC]/[PAL]). 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. Set the mode dial to q when connecting via an AV cable. Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV. The movie playback screen cannot be displayed when connecting via an HDMI cable. In addition, the sound will not be played. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV’s settings, the displayed images and information may become cropped. ● ● d4392̲e̲oima̲000̲book̲cs2.indb 41 d4392̲e̲oima̲000̲book̲cs2.indb 41 2008/12/09 17:06:34 2008/12/09 17:06:34
Page: 42
42 EN Selecting the digital video signal format for connecting to a TV via an HDMI cable [HDMI] E SETUP X HDMI “To play back camera images on a TV” (p. 41) Submenu 2 Application 480p Images are played back in 480p format. 720p Images are played back in 720p format. 1080i Images are played back in 1080i format. When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input setting of the TV, the resolution is changed first to 720p and then to 480p. For details on changing the input setting of the TV, refer to the TV’s instruction manual. Saving battery power between shots [POWER SAVE] E SETUP X POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. ON When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button or turn the mode dial. Turning off the camera sounds [F SILENT MODE] F SILENT MODE Submenu 1 Application OFF This activates the individual settings of [SOUND SETTINGS]. ON The electronic sounds (operating sound, shutter sound, warning sound) and playback sounds are muted. [SOUND SETTINGS] (p. 38) d4392̲e̲oima̲000̲book̲cs2.indb 42 d4392̲e̲oima̲000̲book̲cs2.indb 42 2008/12/09 17:06:35 2008/12/09 17:06:35
Page: 43
43 EN Printing 2 Turn on the printer, and then connect the printer and camera. O button USB cable (supplied) Multi- connector OK PC/CUSTOM PRINT EASY PRINT START Open the connector cover in the direction of the arrow. 3 Press O to start printing. 4 To print another image, use NO to select an image, and press the E button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. PRINT EXIT OK Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge- compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [EASY PRINT] 1 Display the image to be printed on the monitor. “Viewing images” (p. 15) Printing can also be started when the camera is turned off. After performing Step 2, use LM to select [EASY PRINT], press the E button. Use NO to select an image, and press the E button. d4392̲e̲oima̲000̲book̲cs2.indb 43 d4392̲e̲oima̲000̲book̲cs2.indb 43 2008/12/09 17:06:35 2008/12/09 17:06:35
Page: 44
44 EN Changing the printer’s settings for printing [CUSTOM PRINT] 1 Follow Steps 1 and 2 for [EASY PRINT] (p. 43), and press the E button. EASY PRINT USB SET OK EXIT CUSTOM PRINT PC 2 Use LM to select [CUSTOM PRINT], and press the E button. 3 Use LM to select the print mode, and press the E button. Submenu 2 Application PRINT This prints the image selected in Step 6. ALL PRINT This prints all images stored in the internal memory or card. MULTI PRINT This prints an image multiple times on one page. Several layout options are available. ALL INDEX This prints an index of all images stored in the internal memory or card. PRINT ORDER*1 This prints images based on the print reservation data on the card. *1 [PRINT ORDER] is available only when print reservations have been made. “Print Reservations (DPOF)” (p. 46) 4 Use LM to select [SIZE] (Submenu 3), and press O. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS] and [PICS/ SHEET] are set to the printer’s standard. STANDARD STANDARD PRINTPAPER SET OK MENU BACK SIZE BORDERLESS 5 Use LM to select the [BORDERLESS] or [PICS/SHEET] settings, and press the E button. Submenu 4 Application OFF/ON*1 The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). (The number of images per sheet varies depending on the printer.) The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer’s standard settings. 100-0004 100-0004 OK 4 4 IN SINGLEPRINT MORE PRINT d4392̲e̲oima̲000̲book̲cs2.indb 44 d4392̲e̲oima̲000̲book̲cs2.indb 44 2008/12/09 17:06:35 2008/12/09 17:06:35
Page: 45
45 EN 6 Use NO to select an image. 7 Press L to make a [SINGLE PRINT] reservation for the displayed image. Press M to make detailed printer settings for the current image. To make detailed printer settings 1 Use LMNO to make settings and press the E button. DATE PRINT INFO SET OK P FILE NAME < x WITHOUT WITHOUT 1 EXIT MENU Submenu 5 Submenu 6 Application <× 0 to 10 This selects the number of prints. DATE WITH/ WITHOUT Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. FILE NAME WITH/ WITHOUT Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. P (Proceeds to the setting screen.) This selects a portion of the image for printing. To crop an image (P) 1 Use the zoom button to select the size of the cropping frame, use LMNO to move the frame, and then press the E button. Cropping frame T W SET OK 2 Use LM to select [OK], and press the E button. P MENU BACK SET OK IN OK CANCEL 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [SINGLEPRINT]. 9 Press the E button. PRINT SET OK MENU BACK PRINT CANCEL 10Use LM to select [PRINT], and press the E button. Printing starts. When [OPTION SET] is selected in [ALL PRINT] mode, the [PRINT INFO] screen is displayed. After printing has finished, [PRINT MODE SELECT] will be displayed. ALL PRINT PRINT MODE SELECT SET OK ALL INDEX PRINT ORDER MULTI PRINT PRINT EXIT MENU ● ● ● d4392̲e̲oima̲000̲book̲cs2.indb 45 d4392̲e̲oima̲000̲book̲cs2.indb 45 2008/12/09 17:06:36 2008/12/09 17:06:36
Page: 46
46 EN To cancel printing 1 Press the E button while [TRANSFERRING] is displayed. 2 Select [CANCEL] using LM and then press the E button. PRINT SET OK CONTINUE CANCEL CANCEL OK TRANSFERRING 11Press the m button. 12When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer. Print Reservations (DPOF*1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Make changes using the original device. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. Single-frame print reservations [<] 1 Set the mode dial to q, and then press the m button to display the top menu. 2 Use LMNO to select [L PRINT ORDER], and press the E button. PRINT ORDER SET OK < U EXIT MENU 3 Use LM to select [<], and press the E button. x 12M 12M 2009.08.26 2009.08.26 12:30 12:30 100-0004 100-0004 4 4 0 NORM NORM SET OK 4 Use NO to select the image for print reservation. Use LM to select the quantity. Press the E button. SET OK MENU BACK DATE TIME NO X d4392̲e̲oima̲000̲book̲cs2.indb 46 d4392̲e̲oima̲000̲book̲cs2.indb 46 2008/12/09 17:06:36 2008/12/09 17:06:36
Page: 47
47 EN 5 Use LM to select the [X] (date print) screen option, and press the E button. Submenu 2 Application NO This prints the image only. DATE This prints the image with the shooting date. TIME This prints the image with the shooting time. OK SET BACK MENU PRINT ORDER SET CANCEL 1 ( 1) 1 ( 1) 6 Use LM to select [SET], and press the E button. Reserving one print each of all images on the card [U] 1 Follow Steps 1 and 2 in [<] (p. 46). 2 Use LM to select [U], and press the E button. 3 Follow Steps 5 to 6 in [<]. Resetting all print reservation data 1 Set the mode dial to q, and then press the m button to display the top menu. 2 Use LMNO to select [L PRINT ORDER], and press the E button. 3 Use LM to select either [<] or [U], and press the E button. OK SET BACK MENU PRINT ORDER SETTING PRINT ORDERED RESET KEEP 4 Use LM to select [RESET], and press the E button. Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 of “Resetting all print reservation data” (p. 47). 2 Use LM to select [<], and press the E button. 3 Use LM to select [KEEP] and press the E button. 4 Use NO to select the image with the print reservation you want to cancel. Use LM to set the print quantity to “0”. 5 If necessary, repeat Step 4, and then press the E button when finished. 6 Use LM to select the [X] (date print) screen option, and press the E button. The settings are applied to the remaining images with the print reservation data. 7 Use LM to select [SET], and press the E button. ● d4392̲e̲oima̲000̲book̲cs2.indb 47 d4392̲e̲oima̲000̲book̲cs2.indb 47 2008/12/09 17:06:37 2008/12/09 17:06:37
Page: 48
48 EN Using OLYMPUS Master 2 Windows After the computer detects the camera, a message indicating the success of the operation will appear. Confirm the message by clicking “OK.” The camera is recognized as a removable disk. Macintosh When iPhoto started, exit iPhoto and start OLYMPUS Master 2. While the camera is connected to the computer, shooting functions are disabled. Connecting the camera to a computer via a USB hub may cause unstable operation. When [MTP] is set for the submenu that appears by pressing O after selecting [PC] in Step 3, images cannot be transferred to a computer using OLYMPUS Master 2. Starting OLYMPUS Master 2 1 Double-click the OLYMPUS Master 2 icon. Windows appears on the desktop. Macintosh appears in the OLYMPUS Master 2 folder. Browse window appears after starting the software. When OLYMPUS Master 2 is started for the first time after installation, “Default Settings” and “Registration” screens will appear. Follow the instructions on the screen. ● System requirements and installation of OLYMPUS Master 2 Install the OLYMPUS Master 2 software by referring to the included installation guide. Connecting the camera to a computer 1 Make sure the camera is turned off. The monitor is off. The lens is retracted. 2 Connect the camera to a computer. The camera automatically turns on. EASY PRINT USB SET OK EXIT CUSTOM PRINT PC Multi- connector USB cable (supplied) Open the connector cover in the direction of the arrow. Locate the position of the USB port by referring to your computer’s instructions manual. 3 Use LM to select [PC], and press the E button. The computer automatically detects the camera as a new device on the first connection. ● ● ● ● d4392̲e̲oima̲000̲book̲cs2.indb 48 d4392̲e̲oima̲000̲book̲cs2.indb 48 2008/12/09 17:06:37 2008/12/09 17:06:37
Page: 49
49 EN Operating OLYMPUS Master 2 When OLYMPUS Master 2 is started, a Quick Start Guide will appear on the screen to help you become familiar with the software. If the Quick Start Guide is not displayed, click in the toolbar to show the Guide. For details on the operation, refer to the help guide of the software. Transferring and saving images without using OLYMPUS Master 2 This camera is compatible with the USB Mass Storage Class. You can transfer and save the image data on your computer while the camera and the computer are connected. System requirements Windows : Windows 2000 Professional/ XP Home Edition/ XP Professional/Vista Macintosh : Mac OS X v10.3 or later On a computer running Windows Vista, if [MTP] is set for the submenu that appears by pressing O after selecting [PC] in Step 3 of “Connecting the camera to a computer” (p. 47), Windows Photo Gallery will become available. Even if a computer has USB ports, proper operation is not guaranteed in the following cases: Computers with USB ports installed using an expansion card, etc. Computers without a factory-installed OS and home-built computers ● ● d4392̲e̲oima̲000̲book̲cs2.indb 49 d4392̲e̲oima̲000̲book̲cs2.indb 49 2008/12/09 17:06:37 2008/12/09 17:06:37
Page: 50
---- -- -- -- -- X Y M Y M D D TIME MENU CANCEL 50 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Troubleshooting Battery “The camera does not work even when battery is installed.” Insert recharged battery in the correct direction. “Charging the battery” (p. 10), “Loading the battery and the xD-Picture CardTM (sold separately) into the camera” (p. 11) Battery performance may have been reduced temporarily due to low temperature. Take the battery out of the camera and warm them by putting them in your pocket for a while. Card/Internal memory “An error message is displayed.” “Error message” (p. 51) Shutter button “No picture is taken when the shutter button is pressed.” Set the mode dial to a position other than q. Cancel sleep mode To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom button or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left on for 12 minutes, it automatically turns off. Press the K button to turn the camera on. Wait until #(flash charge) stops blinking before taking pictures. ● ● ● ● ● With prolonged camera use, the internal temperature may increase, resulting in automatic shutdown. If this occurs, remove the battery from the camera and wait until the camera has suffi ciently cooled. The camera’s external temperature may also increase during use, however this is normal and does not indicate malfunction. Monitor “It is difficult to see the image on the monitor.” Condensation*1 may have formed inside the monitor. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. “Vertical lines appear on the screen.” Vertical lines may appear on the screen when the camera is pointed at an extremely bright subject in situations such as clear weather conditions. The lines do not appear, however, in the final still image. “The light is caught in the picture” Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Date and time function “Date and time settings return to the default setting.” If the battery is removed and left out of the camera for about 3 days*2 , the date and time settings return to the default settings and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the battery has been loaded. “Setting the date and time” (p. 13) Other “There is a noise coming from inside the camera during shooting.” The movement of the lens may make a noise even if the camera is not being operated because the autofocus function is active when the camera is ready to shoot. ● ● ● ● ● ● d4392̲e̲oima̲000̲book̲cs2.indb 50 d4392̲e̲oima̲000̲book̲cs2.indb 50 2008/12/09 17:06:38 2008/12/09 17:06:38

Question & answers

Have a question about the Olympus Stylus 7000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus Stylus 7000. Please make sure that you describe your difficulty with the Olympus Stylus 7000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus Stylus 7000

Name
Email
Reaction

View a manual of the Olympus Stylus 7000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: Stylus 7000
  • Filetype: PDF
  • Available languages: English, Spanish