SP-550UZ

Olympus SP-550UZ manual

SP-550UZ

User manual for the Olympus SP-550UZ in English. This PDF manual has 100 pages.

Page: 1
Instruction Manual Menu operations Button operations Printing pictures Using OLYMPUS Master Getting to know your camera better Appendix DIGITAL CAMERA Quick Start Guide This manual will help you get started using your camera right away. SP-550UZ Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.  We recommend that you take test shots to get accustomed to your camera before taking important photographs.  In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual.  The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product.  d4321_e_unifild_Print_00_bookfile.book Page 1 Tuesday, December 19, 2006 11:20 AM
Page: 2
2 EN Contents Quick Start Guide P.3 Button operations P.10 Test out the functions of the camera buttons by following the illustrations and trying them out on the camera. Menu operations P.19 Learn everything about the menus, from basic operations to the functions of each menu and their various settings. Printing pictures P.46 Learn how to print pictures you have taken. Using OLYMPUS Master P.53 Learn how to transfer pictures to a computer and save them. Getting to know your camera better P.61 Find out more about your camera and learn what to do when you have a question regarding operations. Appendix P.76 Read about convenient functions and safety precautions on how to use your camera more effectively. Arrow pad indication The directions of the arrow pad are indicated with 124 3 in this manual. d4321_e_unifild_Print_00_bookfile.book Page 2 Tuesday, December 19, 2006 11:20 AM
Page: 3
EN 3 Quick Start Guide Gather these items (box contents) Be sure to use the strap and strap rings provided. Quick Start Guide Digital Camera Strap/Strap rings Lens Cap/Lens Cap String AA Batteries (four) USB cable AV Cable OLYMPUS Master CD-ROM Items not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Attach the strap and the lens cap Strap Eyelet d4321_e_unifild_Print_00_bookfile.book Page 3 Tuesday, December 19, 2006 11:20 AM
Page: 4
4 EN Quick Start Guide Pull the strap tight so that it does not come loose. This camera allows you to take pictures without using an optional xD- Picture Card (hereinafter called the card). For details on inserting the card, please refer to “Inserting and removing the card” (P.78). • Attach the strap to the other eyelet in the same manner. Prepare the battery d4321_e_unifild_Print_00_bookfile.book Page 4 Tuesday, December 19, 2006 11:20 AM
Page: 5
EN 5 Quick Start Guide Turn the camera on This explains how to turn on the camera in shooting mode. a. Set the mode dial to h. Still picture shooting modes b. Press the o button. To turn on the camera, press the o button after removing the lens cap. To turn off the camera, press the o button once again. h This function allows you to take pictures with full automatic settings. P The camera automatically sets the optimum aperture value and shutter speed. A This function allows you to change the aperture manually. S This function changes the shutter speed for shooting pictures. M This function allows you to change the aperture and shutter speed manually. r This function allows you to set each shooting function manually and use as your original shooting mode. g This function allows you to set the target items by following the shooting guide displayed on the screen. s This function allows you to shoot pictures by selecting a scene according to the shooting condition. When shooting movies (shooting mode) Shooting Mode MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- • When the date and time have not yet been set, this screen will appear. d4321_e_unifild_Print_00_bookfile.book Page 5 Tuesday, December 19, 2006 11:20 AM
Page: 6
6 EN Quick Start Guide Set date and time a. Press the 1 F button and the 2Y button to select [Y]. The first two digits of the [Y] are fixed. b. Press the 3# button. c. Press the 1 F button and the 2Y button to select [M]. About the date and time setting screen MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- Y-M-D (Year-Month-Day) Exits a setting. Minute Date formats (Y/M/D, M/D/Y, D/M/Y) Hour CANCEL MENU 2007 2007.--.-- --:-- .--.-- --:-- X Y M D T I M E Y M D T I M E Y / M / D Y / M / D 1 F button 2Y button 3# button 2007 2007.08 08.-- --:-- .-- --:-- CANCEL MENU X Y M D T I M E Y M D T I M E Y / M / D Y / M / D d4321_e_unifild_Print_00_bookfile.book Page 6 Tuesday, December 19, 2006 11:20 AM
Page: 7
EN 7 Quick Start Guide d. Press the 3# button. e. Press the 1 F button and the 2Y button to select [D]. f. Press the 3# button. g. Press the 1 F button and the 2Y button to select “hour”, “minute”. The time is displayed in the 24-hour format. h. Press the 3# button. i. Press the 1 F button and the 2Y button to select [Y/M/D]. j. After all items have been set, press the o button. For precise time setting, press the o button as the time signal strikes 00 seconds. 2007 2007.08 08.26 26 --:-- --:-- CANCEL MENU X Y M D T I M E Y M D T I M E Y / M / D Y / M / D CANCEL MENU OK SET 2007 2007.08 08.26 26 12 12:30 30 X Y M D T I M E Y M D T I M E Y / M / D Y / M / D CANCEL MENU OK SET 2007 2007.08 08.26 26 12 12:30 30 X Y / M / D Y / M / D Y M D T I M E Y M D T I M E o button d4321_e_unifild_Print_00_bookfile.book Page 7 Tuesday, December 19, 2006 11:20 AM
Page: 8
8 EN Quick Start Guide Take a picture a. Hold the camera b. Focus c. Shoot a. Press the u button. b. While looking through the viewfinder, rotate the diopter adjustment dial little by little. When you can see [ ] (AF target mark) clearly, adjustment is complete. Horizontal grip Vertical grip Shutter button (Pressed Halfway) Place this mark over your subject. The number of remaining still pictures is displayed. The green lamp indicates the focus and exposure are locked. (Pressed Completely) Shutter button The card access lamp blinks. Adjusting the viewfinder’s focus using the diopter Diopter adjustment dial u button d4321_e_unifild_Print_00_bookfile.book Page 8 Tuesday, December 19, 2006 11:20 AM
Page: 9
EN 9 Quick Start Guide View pictures a. Set the mode dial to q. a. Press the 4& button and the 3# button to display the picture you want to erase. b. Press the S button. c. Press the 1 F button to select [YES], and press the o button to erase the picture. Arrow pad Next Picture Prev. Picture Mode Dial Erase pictures OK SET MENU BACK YES NO E R A S E [ I N ] 3# button 4& button S button OK SET MENU BACK YES NO E R A S E 1 F button o button d4321_e_unifild_Print_00_bookfile.book Page 9 Tuesday, December 19, 2006 11:20 AM
Page: 10
10 EN Button operations Button operations Set the mode dial to the desired shooting or playback mode. • Some functions cannot be set depending on the position of the mode dial. g “Functions available in shooting modes and scene modes” (P.72) The camera determines the optimum settings for the shooting conditions automatically. The camera automatically sets the optimum aperture value and shutter speed for the brightness of the subject. 1 o button Turning the camera on and off Power on: Shooting Mode • Monitor turns on • Lens extends • Before turning the camera on in shooting mode, remove the lens cap. Playback mode • Monitor turns on 2 Mode dial Switching between shooting and playback modes h Shooting pictures with full automatic settings P Set the optimum aperture value and shutter speed Playback mode Shooting Mode Shooting Mode Flash mode Self-timer Macro mode/ Super macro mode ng the camera on and off ching between shooting and playback modes d4321_e_unifild_Print_00_bookfile.book Page 10 Tuesday, December 19, 2006 11:20 AM
Page: 11
EN 11 Button operations Press 124 3 after pressing 1 F. To take long exposure (bulb) shots Press 2 to set shutter speed to BULB. The shutter remains open as long as the shutter button is pressed. (The maximum time that it can remain open is 8 minutes, however, this is possible only when [ISO] is set to [50], [100] or [200].) A Changing the aperture value for shooting pictures Press 12 after pressing 1 F. The camera automatically sets the shutter speed. Aperture value 1 : Increases the aperture value. 2 : Decreases the aperture value. When the correct exposure cannot be obtained, the aperture value is displayed in red. o : Sets the settings. S Changing the shutter speed for shooting pictures Press 12 after pressing 1 F. The camera automatically sets the aperture value. Shutter speed 1 : Sets the shutter speed faster. 2 : Sets the shutter speed slower. When the correct exposure cannot be obtained, the aperture value is displayed in red. o : Sets the settings. M Changing the aperture value and shutter speed for shooting pictures Exposure differential When this range has been exceeded ±3.0EV, the exposure differential is displayed in red. Aperture value 4 : Increases the aperture value. 3 : Decreases the aperture value. Shutter speed 1 : Sets the shutter speed faster. 2 : Sets the shutter speed slower. o : Sets the settings. [ ] A F4.0 F4.0 0.0 0.0 1/1000 1/1000 OK SET Adjustment range W : F2.8 to F8.0 T : F4.5 to F8.0 Shutter speed range: 1/2 to 1/1000 (When [NOISE REDUCT.] is set to [ON]: up to 4 sec.) [ ] S F 2 . 8 F 2 . 8 1 / 1 0 0 1 / 1 0 0 OK SET 0 . 0 0 . 0 M [ ] F2.8 F2.8 1/1000 1/1000 +2.0 +2.0 OK SET Setting range: Aperture value F2.8 to F8.0 Shutter speed: 15" to 1/2000 (The shutter speed varies depending on the aperture value.) d4321_e_unifild_Print_00_bookfile.book Page 11 Tuesday, December 19, 2006 11:20 AM
Page: 12
Button operations 12 EN This mode allows you to set each shooting function manually and use as your original shooting mode. g “MY MODE SETUP Setting and saving shooting-related functions” (P.45) Use the function menu to switch my mode. g “The functions you can set with the function menu” (P.18) You can shoot pictures by selecting a scene mode according to the situation. Select a scene mode/change the scene mode to another one • Press m and select [SCN] from the top menu. Use the 12 to select a scene and press o. • By switching to the other scene mode, most settings will be changed to the default settings of each scene mode. When [R] (movies) is set to [ON], audio is recorded with the movie. • When [R] (movies) is set to [ON], optical zoom cannot be used during the shooting. g “R (movies) Recording sound with movies” (P.31) • To zoom in when [R] (movies) is set to [ON], set [DIGITAL ZOOM] to [ON]. g “DIGITAL ZOOM Zooming in on your subject” (P.26) • When [IMAGE STABILIZER] is set to [ON], continuous movie recording for a long period will cause the camera’s internal temperature to rise and the camera may stop operation automatically. Remove the battery and allow the camera to cool down for some time before you begin shooting again. Or you can set [IMAGE STABILIZER] to [OFF]. In addition, the temperature of the camera’s exterior also rises during usage. This is not a malfunction. rSetting your own original mode for shooting pictures g Follow the shooting guide for setting This function allows you to set the target items by following the shooting guide displayed on the screen. • Press m to display the shooting guide again. • To change the setting without using the shooting guide, set the shooting mode to another one. • Functions set using the Shooting Guide will revert to the default settings when m is pressed or when the shooting mode is changed. s Shoot pictures by selecting a scene according to the situation nRecording movies This icon lights red during movie recording. The remaining recording time is displayed. When the remaining recording time reaches 0, recording stops. OK SET 4 Set particular lighting. 5 Shooting into backlight. Brightening subject. Blurring background. Adjusting area in focus. 3 2 1 SHOOTING GUIDE 1 / 3 d4321_e_unifild_Print_00_bookfile.book Page 12 Tuesday, December 19, 2006 11:20 AM
Page: 13
EN 13 Button operations The last picture taken is displayed. • Press the arrow pad to view other pictures. • Use the zoom lever to switch among close-up playback, index display and calendar display. g “MOVIE PLAY Playing back movies” (P.33) Shooting still pictures Set the mode dial to h, P, A, S, M, r, g or s, and lightly press the shutter button (halfway). The green lamp lights when the focus and exposure are locked (focus lock). Now press the shutter button all the way (completely) to shoot a picture. Recording movies Set the mode dial to n, and press the shutter button halfway to lock the focus, and then press the shutter button completely to start recording. Press the shutter button again to stop recording. Shooting mode: Zooming in on your subject Optical zoom: 18× qSelecting playback mode 3 Shutter button Shooting pictures Locking the focus and then composing the shot (focus lock) Compose your picture with the focus locked, and then fully press the shutter button to shoot a picture. • When the green lamp blinks, the focus is not adjusted properly. Try locking the focus again. 4 Zoom Lever Zooming while shooting/close-up playback oting pictures Green lamp ming while shooting/close-up playback Zoom out: Push the lever toward W. Zoom in: Pull the lever toward T. d4321_e_unifild_Print_00_bookfile.book Page 13 Tuesday, December 19, 2006 11:20 AM
Page: 14
Button operations 14 EN Playback mode: Changing the picture display Press h in shooting mode to select the digital image stabilization. Press o to set. g “IMAGE STABILIZER Shooting pictures using digital image stabilization” (P.27) Frequently used functions can be assigned to h as a custom button when the mode dial is set to P, A, S, M, r or s. The digital image stabilization is activated when the mode dial is set to h or n. g “CUSTOM BUTTON Assigning functions to the custom buttons” (P.45) “Functions that can be assigned to My Mode/custom button” (P.71) 5 h button Shooting with digital image stabilization Close-up playback • Pull the lever toward T to incrementally enlarge the picture up to 10 times the original size. Push the lever toward W to reduce the size. • Use the arrow pad during close- up playback to scroll around the picture. • Press o to return to the single- frame playback. Index display • Use the arrow pad to select a picture for playback, and press o to play back the single- frame of the picture selected. Calendar display • Use the arrow pad to select the date, and press o or pull the lever toward T on the zoom lever to display the pictures on the date selected. Single-frame playback • Use the arrow pad to browse pictures. oting with digital image stabilization d4321_e_unifild_Print_00_bookfile.book Page 14 Tuesday, December 19, 2006 11:20 AM
Page: 15
EN 15 Button operations Opens the flash. Press this button to take a picture with flash. g “3# button Flash shooting” (P.17) Toggles between the monitor and viewfinder. Displays the top menu. Locking the focus position (AF Lock) • Assign the AF lock function to h so that the focus is locked by pressing h, and V (AF lock mark) is displayed on the monitor. Press h again to cancel the AF lock. Each time you press the button, focus is locked and canceled alternately. • To save the locked focus position after taking a picture (AF memory), hold down h for more than 1 second so that U (AF memory mark) is displayed on the monitor. Press h again to reset the AF memory. • If the zoom is operated after engaging the AF lock, the picture may be out of focus. Engage the AF lock after operating the zoom. Locking the exposure (AE lock) • Assign the AE lock function to h so that the meter reading is saved by pressing h and the exposure is locked. B (AE lock mark) is displayed on the monitor. Press h again to cancel the AE lock. Each time you press the button, focus is locked and canceled alternately. • AE lock is automatically canceled after each shooting. • To save the locked meter reading after taking a picture (AE memory), hold down h for more than 1 second so that C (AE memory mark) is displayed on the monitor. C is displayed while the meter reading is being saved. Press h again to reset the AE memory. 6 # button Flash pop-up 7 u button Monitor/Viewfinder 8 m button (MENU) AF lock mark B is displayed while in AE lock. h pop-up tor/Viewfinder d4321_e_unifild_Print_00_bookfile.book Page 15 Tuesday, December 19, 2006 11:20 AM
Page: 16
Button operations 16 EN Changing the information displays Press DISP./E to change the display in the following order. *1 Not displayed in case of n. *2 Not displayed if it is set to [OFF] in the menu. g “u Displaying the histogram” (P.44) “FRAME ASSIST Displaying the frame assist/Determining the type of frame assist” (P.44) Displaying the menu guide Checking the time While the camera is off, press DISP./E to display the set alarm time (when [ALARM CLOCK] is set) and the current time for 3 seconds. Display a picture to erase in playback mode, and press the S. • Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. g “0 Protecting pictures” (P.37) 9 DISP./E button Changing the information on display/Display the menu guide/Checking the time With menu items selected, hold down DISP./E to display the menu guide. Release DISP./E to close the menu guide. 0 S button Erasing pictures nging the information on display/Display the menu e/Checking the time FRAME ASSIST (Horizontal and vertical lines or diagonal lines)*1*2 Simple display*1 Normal display Shooting Mode Normal display Detailed display Playback mode No information display ESP/ Sets picture brightness for taking pictures. METERING ng pictures Histogram display*1*2 Histogram display*1 d4321_e_unifild_Print_00_bookfile.book Page 16 Tuesday, December 19, 2006 11:20 AM
Page: 17
EN 17 Button operations Use the arrow pad to select scenes, playback picture, and the items on the menus. Shooting mode: Viewing pictures The last picture taken is displayed on the monitor. Press q in shooting mode. Press q again or press the shutter button halfway to return to shooting mode. Playback mode: Printing pictures When the printer is connected to the camera, display a picture to be printed out in playback mode, and press q. g“Easy print” (P.46) Press 4& in shooting mode to select the macro mode. Press o to set. • During super macro mode, the zoom, flash and AF predict are not available. Press 3# in shooting mode to select the flash mode. Press o to set. • To take a picture with the flash, press # (Flash Popup). The settings cannot be made if the flash is not popped up. g “# button Flash pop-up” (P.15) • Some items cannot be set depending on the position of the mode dial. a Arrow pad (124 3) b q button Viewing pictures/Printing pictures c 4& button Shooting pictures close to the subject OFF Macro mode is deactivated. & (Macro mode) Allows you to shoot from as close as 10 cm/3.94 in. (when the zoom is set for the zoom-out angle) to your subject. % (Super macro mode) Allows you to shoot from as close as 1 cm/0.39 in. to your subject. d 1 F button Changing picture brightness Press 1 F in shooting mode, set using 4 3 then press o. • Adjustable from -2.0 EV to +2.0 EV. 3 : Brighten. 4 : Darken. Activate the setting contents. e 3# button Flash shooting AUTO (Auto-flash) The flash fires automatically in low light or backlight conditions. !(Red-eye reduction flash) This emits pre-flashes to reduce the occurrence of red-eye in your pictures. #(Fill-in flash) The flash fires regardless of the available light. H(Red-eye fill-in flash) The flash always fires after pre-flashes for red-eye reduction are emitted. #SLOW The flash fires with slow shutter speed. Set the flash timing in [#SYNCRO]. g“#SYNCRO Selecting the flash timing” (P.28) $(Flash off) The flash does not fire even in low light conditions. ing pictures/Printing pictures oting pictures close to the subject nging picture brightness [ ] P F 8 . 0 F 8. 0 1 / 1 0 0 0 1 /1 00 0 OK + 2 .0 + 2 .0 SET h shooting d4321_e_unifild_Print_00_bookfile.book Page 17 Tuesday, December 19, 2006 11:20 AM
Page: 18
Button operations 18 EN Press 2Y in shooting mode to select on and off of the self-timer. Press o to set. • To cancel the self-timer, press 2Y. • Self-timer shooting is automatically canceled after one shot. Displays the function menu which contains the functions and settings frequently used during shooting. This button is also used to confirm your selection. The functions you can set with the function menu • Displayed when the mode dial is set to r. • Settings are registered on s as a factory default. Other functions you can set with the function menu g “WB Adjusting the color of a picture” (P.23) “ISO Changing the ISO sensitivity” (P.24) “DRIVE Continuous shooting” (P.25) “METERING Changing the area for measuring the brightness of a subject” (P.25) f 2Y button Self-timer shooting YOFF Cancel the self-timer. Y12 SEC After the setting, press the shutter button completely. The self- timer lamp lights for approximately 10 seconds, then starts blinking. After blinking for approximately 2 seconds, the picture is taken. Y2 SEC After the setting, press the shutter button completely. The self- timer lamp flashes for 2 seconds, the picture is taken. g o button (OK/FUNC) Setting using the function menu My 1/2/3/4 .................................................. Switching the registered original shooting mode s/E/c/d 4 3 : Select a setting, and press o. 12 : Select the function to be set. timer shooting ng using the function menu ching the registered original shooting mode Function menu d4321_e_unifild_Print_00_bookfile.book Page 18 Tuesday, December 19, 2006 11:20 AM
Page: 19
EN 19 Menu operations Menu operations Pressing m displays the top menu on the monitor. • The items displayed on the top menu differ according to the mode. • When [CAMERA MENU], [PLAYBACK MENU], [EDIT], [ERASE] or [SETUP] is selected, the menu corresponding to the respective functions is displayed. • When your camera is set according to the shooting guide with the mode dial set at g, press m to display the shooting guide screen. During menu operations, the buttons and their respective functions are displayed at the bottom of the monitor. Follow these guides to navigate the menus. About the menus Operation guide BACKa : Returns to the previous menu. EXITa : Exits the menu. : Press 124 3 to select a setting. SETf : Sets the selected item. Mode Dial m button Arrow pad o button SCN OK MENU SET EXIT SCN SCN SETUP SETUP SETUP SILENT SILENT MODE MODE SILENT MODE RESET RESET IMAGE IMAGE QUALITY QUALITY IMAGE QUALITY RESET SCN CAMERA CAMERA MENU MENU SCN CAMERA MENU OK SET MENU BACK 1 2 3 4 5 CAMERA MENU WB AUTO ISO AUTO FINE ZOOM DRIVE METERING o ESP OFF Top menu (in still picture shooting mode) SCN OK MENU SET EXIT SCN SCN SETUP SETUP SETUP SILENT SILENT MODE MODE SILENT MODE RESET RESET IMAGE IMAGE QUALITY QUALITY IMAGE QUALITY RESET SCN CAMERA CAMERA MENU MENU SCN CAMERA MENU Operation guide m Arrow pad o d4321_e_unifild_Print_00_bookfile.book Page 19 Tuesday, December 19, 2006 11:20 AM
Page: 20
20 EN Menu operations This explains how to use the menus with [DIGITAL ZOOM] as an example. 1 Set the mode dial to P. 2 Press m to display the top menu. Select [CAMERA MENU] and press o. • [DIGITAL ZOOM] is on a menu in [CAMERA MENU]. Press o. 3 Press 12 to select [DIGITAL ZOOM], and press o. • Unavailable settings cannot be selected. • When pressing 4 on this screen, the cursor moves to the page display. Pressing 12 changes the page. To return to item selection, press 3 or o. 4 Press 12 to select [OFF] or [ON], and press o. • The menu item is set and the previous menu is displayed. Press m repeatedly to exit the menu. • To cancel changes and continue menu operation, press m before pressing o. Using the menus Shooting mode menu h P A S M r s n 4CAMERA MENU WB ISO DRIVE METERING FINE ZOOM DIGITAL ZOOM AF MODE FOCUS MODE FULLTIME AF AF PREDICT AF ILLUMINAT. IMAGE STABILIZER w #SYNCRO QFLASH R (still pictures) PANORAMA*1 > SHARPNESS CONTRAST SATURATION NOISE REDUCT. TIMELAPSE 1 (conversion lens) R (movies) *1 An OLYMPUS xD-Picture Card is required. SCN OK MENU SET EXIT SCN SCN SETUP SETUP SETUP SILENT SILENT MODE MODE SILENT MODE RESET RESET IMAGE IMAGE QUALITY QUALITY IMAGE QUALITY RESET SCN CAMERA CAMERA MENU MENU SCN CAMERA MENU OK SET MENU BACK 1 2 3 4 5 CAMERA MENU WB AUTO ISO AUTO FINE ZOOM DRIVE METERING o ESP OFF OK SET MENU BACK 2 3 4 5 1 CAMERA MENU DIGITALZOOM OFF AF MODE iESP FULLTIMEAF FOCUS MODE AF OFF AF PREDICT OFF The selected item is displayed in a different color. Page display: The page display mark is displayed when there are additional menu items on the next page. OK SET MENU BACK 2 1 3 4 5 CAMERA MENU DIGITAL ZOOM FOCUS MODE AF MODE FULLTIME AF AF PREDICT ON OFF SCN OK MENU SET EXIT SCN SCN SETUP SETUP SETUP RESET RESET IMAGE IMAGE QUALITY QUALITY IMAGE QUALITY RESET SCN CAMERA CAMERA MENU MENU SCN CAMERA MENU SILENT SILENT MODE MODE SILENT MODE 1 3 4 5 2 d4321_e_unifild_Print_00_bookfile.book Page 20 Tuesday, December 19, 2006 11:20 AM
Page: 21
EN 21 Menu operations • Some menu items are not available depending on the position of the mode dial. g “Functions available in shooting modes and scene modes” (P.72) g “SETUP menus” (P.39) • The factory default settings are displayed in gray ( ). Still picture image quality and their applications *1 Not displayed when set to h or s. *2 If you select [SQ1] or [SQ2], select [HIGH] or [NORMAL] after selecting the image size. JPEG copy Pictures taken in the [RAW] data format can be stored in JPEG format at the same time as they are recorded in raw data. To record pictures in JPEG format you can select [SHQ], [HQ], [SQ1] or [SQ2] for the record mode, but you cannot select the image size. Pictures are recorded in the size currently set for each record mode. 1 IMAGE QUALITY Changing the image quality Image quality/ Image size Compression Application RAW*1 3072x2304 — • Raw uncompressed data. • Data is in ORF format. SHQ 3072x2304 Low compression • This is useful for printing large images on full-size paper. (For [3072x2304].) • This is useful for ordering prints from a photo store. (For [3 : 2 3072x2048].) • This is useful for performing computer image processing, such as contrast adjustment and red-eye correction. 3 : 2 3072x2048 HQ 3072x2304 Standard compression 3 : 2 3072x2048 SQ1*2 2560x1920 Low compression (High quality) / Standard (Standard compression) • This is useful for printing on full-size paper. • This is useful for computer editing such as rotating or adding text to a picture. 2304x1728 2048x1536 SQ2*2 1600x1200 Low compression (High quality) / Standard (Standard compression) • This is useful for printing on A5 paper and below. • This is useful for viewing pictures on a computer. 1280x960 1024x768 • This is useful for sending as e-mail attachments. 640x480 16 : 9 1920x1080 Standard compression • This is useful for expressing the broadness of a subject such as landscapes and for viewing pictures on a wide-screen television. • In the [IMAGE QUALITY] screen, select [RAW], and press 3. • Select a JPEG duplicate setting from [OFF], [SHQ], [HQ], [SQ1] and [SQ2] and press o. (Select [OFF] to save raw data only.) nging the image quality OK MENU SET BACK JPEG DUPLICATE SETTING SHQ OFF HQ SQ1 [ I N ] d4321_e_unifild_Print_00_bookfile.book Page 21 Tuesday, December 19, 2006 11:20 AM
Page: 22
22 EN Menu operations Movie image quality It restores shooting functions back to default settings. Functions restored to the factory default settings Image quality/ Image size Number of frames SHQ 640x480 30 frames/sec. HQ 640x480 15 frames/sec. SQ1 320x240 30 frames/sec. SQ2 320x240 15 frames/sec. 2 RESET Change the shooting functions back to default settings NO / YES 3 s (Scene) Shooting pictures by selecting a scene according to the situation PORTRAIT /LANDSCAPE/LANDSCAPE+PORTRAIT/SPORT/ NIGHT SCENE*1 /NIGHT+PORTRAIT*1 /INDOOR/CANDLE/SELF PORTRAIT/ AVAILABLE LIGHT/SUNSET/FIREWORKS*1/CUISINE/BEHIND GLASS/ DOCUMENTS/AUCTION/SHOOT & SELECT1*2 /SHOOT & SELECT2*3 / BEACH/SNOW/UNDER WATER WIDE1*4 /UNDER WATER WIDE2*4*5 / UNDER WATER MACRO*4 nge the shooting functions back to default settings Function Factory default setting Ref. Page Flash AUTO P.17 & OFF P.17 Y YOFF P.18 F 0.0 P.17 IMAGE QUALITY HQ P.21 WB AUTO P.23 ISO AUTO P.24 DRIVE o P.25 METERING ESP P.25 FINE ZOOM OFF P.26 DIGITAL ZOOM OFF P.26 AF MODE iESP P.26 FOCUS MODE AF P.27 FULLTIME AF OFF P.27 AF PREDICT OFF P.27 AF ILLUMINAT. ON P.27 IMAGE STABILIZER ON P.27 w ± 0.0 P.28 #SYNCRO #SYNC1 P.28 QFLASH IN P.28 R (still pictures) OFF P.28 > ± 0 P.29 SHARPNESS ± 0 P.30 CONTRAST ± 0 P.30 SATURATION ± 0 P.30 NOISE REDUCT. ON P.30 TIMELAPSE OFF P.31 1 (conversion lens) OFF P.31 R (movies) OFF P.31 Monitor/Viewfinder (u) Monitor P.15 s PORTRAIT P.22 Function Factory default setting Ref. Page oting pictures by selecting a scene according to the tion d4321_e_unifild_Print_00_bookfile.book Page 22 Tuesday, December 19, 2006 11:20 AM
Page: 23
EN 23 Menu operations The scene mode selection screen displays sample images as well as a description of the shooting situation for which it is designed. • By switching to the other scene mode, most settings will be changed to the default settings of each scene mode. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time, during which the next picture cannot be taken. *2 The focus is locked at the first frame. *3 During sequential shooting, the camera focuses for each frame. *4 Use a waterproof protector. *5 The focus distance is fixed at approximately 5.0 m (16.4 ft). [eSHOOT & SELECT1] [fSHOOT & SELECT2] • Press and hold the shutter button to shoot sequential pictures. After shooting pictures, select the ones you want to erase, put R to them, and press S to erase them. Selected picture. Press 4 3 to scroll through the pictures. Pictures with R are erased. Select the pictures to be erased. 4 CAMERA MENU WB .................................................................................... Adjusting the color of a picture AUTO The white balance is adjusted automatically for natural color, regardless of the light source. PRESET Selects the white balance according to the light source. 5 Sunny day For shooting under a clear sky. 3 Cloudy day For shooting under a cloudy sky. 1 Tungsten light For shooting under tungsten lighting. w Fluorescent lamp 1 For shooting under daylight fluorescent lighting. (This type of lamp is mainly used in homes.) x Fluorescent lamp 2 For shooting under a neutral white fluorescent lamp. (This type of lamp is mainly used in desk lamps.) y Fluorescent lamp 3 For shooting under a white fluorescent lamp. (This type of lamp is mainly used in offices.) V One-touch WB For setting a more precise white balance than preset white balance can provide. You can set and save the optimum white balance for the shooting conditions. B F D j G OK SET MENU BACK 1 PORTRAIT Scene mode selection screen Set the scene mode. OK MENU S BACK GO e e sting the color of a picture d4321_e_unifild_Print_00_bookfile.book Page 23 Tuesday, December 19, 2006 11:20 AM
Page: 24
24 EN Menu operations When [PRESET] is selected When [V] is selected • With the [ONE TOUCH WB] screen displayed, point the camera at a sheet of white paper. Position the paper so that it fills the screen, making sure there are no shadows. • Press o. The new white balance is set. • If set to over [3200], [IMAGE QUALITY] is limited to below [2048x1536]. • If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [3200] and [5000] cannot be set. • If [DRIVE] is set to [c] or [d(15fps)], [HIGH ISO AUTO], [50], [100] and [200] cannot be set. Press 12 to select a white balance setting, then press o. ISO ....................................................................................... Changing the ISO sensitivity AUTO Sensitivity is automatically adjusted according to the conditions of the subject. HIGH ISO AUTO This function has a higher sensitivity compared to [AUTO] and stabilizes the blur caused by a moving subject or camera movement when taking pictures. 50/100/200/400/ 800/1600/3200/ 5000 A low value lowers the sensitivity for daylight shooting of clear, sharp pictures. The higher the value, the better the camera’s light sensitivity and ability to shoot with a fast shutter speed and in low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. OK MENU SET BACK 5 3 1 w PRESET WB o nging the ISO sensitivity d4321_e_unifild_Print_00_bookfile.book Page 24 Tuesday, December 19, 2006 11:20 AM
Page: 25
EN 25 Menu operations You can take a sequence of pictures at one time by holding down the shutter button. The camera will take pictures continuously until you release the shutter button. • Only [o] is available when record mode is set to [RAW]. • Flash cannot be used when [c] or [d(15fps)] is set. • When [c] is set, [IMAGE QUALITY] is limited to below [2048x1536] and the maximum number of pictures that can be taken for sequential shooting is approximately less than 15. • When [d(15fps)] is set, [IMAGE QUALITY] is limited to below [1280x960] and the maximum number of pictures that can be taken for sequential shooting is approximately less than 20. (This includes the 5 pictures stored shortly before shooting if [PRE-CAPTURE] is set to [ON].) • If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [c] and [d(15fps)] cannot be set. When [d(15fps)] is selected • When [PRE-CAPTURE] is set to [ON], pressing the shutter button halfway stores 5 frames of a picture shortly before shooting. When [BKT] is selected DRIVE ............................................................................................ Continuous shooting o Shoots 1 frame at a time when the shutter button is pressed. j Focus and exposure are locked at the first frame. The sequential shooting speed varies depending on the setting of image quality. c Pictures can be taken at a faster speed than normal sequential shooting. d(15fps) Sequential shooting at a speed of 15 frames/sec. e Adjusts the focus 1 frame at a time. The shooting speed is slower than for normal sequential shooting. BKT Takes pictures sequentially while changing the exposure for each frame. Focus and white balance are locked at the first frame. PRE-CAPTURE OFF /ON Exposure differential ± 0.3 / ± 0.7 / ± 1.0 Number of frames x3 / x5 • Press the shutter button completely and keep it pressed to shoot the preset number of pictures. You can stop shooting at any time by releasing the shutter button. METERING ................................ Changing the area for measuring the brightness of a subject ESP Meters the brightness at the center of the monitor and the surrounding area separately to capture an image with balanced brightness. When taking pictures against strong backlight, the center of the picture may appear dark. n Only the center of the monitor is metered. Recommended for taking a picture against strong backlight. 4 Meters the brightness over a wide area with emphasis on the center of the screen. This method is used when you do not want to allow surrounding light to affect the picture. inuous shooting OK SET MENU BACK BKT 0.7 1.0 0.3 ×3 ×5 nging the area for measuring the brightness of a ect d4321_e_04_02_7.2.fm Page 25 Wednesday, December 20, 2006 10:49 AM
Page: 26
26 EN Menu operations This function allows you to zoom up to 27x by combining the optical zoom and image cropping. • [IMAGE QUALITY] is limited to below [2048x1536]. The digital zoom can be used to take close-up pictures with stronger magnification than the optical zoom. • If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [AREA] cannot be set. When [AREA] is selected • To move the AF target mark Press the arrow pad (the AF target mark is displayed in green). You can take pictures while in this status. • To set the position of the AF target mark Hold down o. To change the position of the mark, hold down o again. FINE ZOOM ................................. Zooming in on your subject without reducing image quality OFF /ON DIGITAL ZOOM .................................................................... Zooming in on your subject OFF /ON AF MODE .............................................................................. Changing the focusing area iESP The camera determines which subject within the screen to focus on. Even when the subject is not in the center of the screen, focusing is possible. SPOT Focus selection is based on the subject within the AF target mark. AREA Move the AF target mark to select the area you want to focus on to take a picture. ming in on your subject without reducing image ty ming in on your subject Zoom bar White area: The optical zoom area Red area: The digital zoom area Optical zoom Digital zoom Maximum magnification: Still picture shooting modes Optical zoom × digital zoom: Approx. 100x (max.) Movie shooting mode Optical zoom × digital zoom: Approx. 54x (max.) nging the focusing area d4321_e_unifild_Print_00_bookfile.book Page 26 Tuesday, December 19, 2006 11:20 AM
Page: 27
EN 27 Menu operations • { blinks and AF predict continues to operate while the shutter button is pressed halfway. • Depending on the subject, the picture may be out of focus even if [AF PREDICT] is set. • During macro and super macro mode, [AF PREDICT] is not available. This function stabilizes the blur caused by camera movement when taking pictures. • It is recommended to make the image stabilizer inactive, when mounted on a tripod. • At very slow shutter speeds (for example when taking night photographs), some images may not acquire the proper stabilization effect. • If the camera is severely shaken, the image stabilizer may not be as effective. FOCUS MODE ...................................................................... Changing the focus method AF Press the shutter button halfway. The camera automatically focuses. MF Adjust the focus manually. When set to [MF] • Press 12 to set the focus. During operation, the focus area is enlarged. • Hold down o to fix the focus. The focus is locked at the distance you have set, and MF is displayed in red on the monitor. To adjust the focus, hold down o again. FULLTIME AF ...................................... Shooting pictures while keeping the subject in focus OFF Press the shutter button halfway to focus. ON Fulltime AF keeps the subject in front of the lens in focus at all times, without having to press the shutter button halfway. The focusing time is reduced, so you will not miss snapshot opportunities. Also, the subject is automatically kept in focus during movie recording. AF PREDICT .................... Shooting pictures with the focus on subjects moving back and forth OFF AF predict is deactivated. ON When activated, position the AF target mark on the subject and press the shutter button halfway to engage the AF predict. Then, press the shutter button completely to take the picture. AF ILLUMINAT. ............................................. Setting to light the illuminator in a dark place OFF AF illuminator does not light. ON Press the shutter button halfway. The AF illuminator automatically lights. IMAGE STABILIZER .............................. Shooting pictures using digital image stabilization OFF Digital image stabilization is deactivated. ON Digital image stabilization is activated after pressing the shutter button halfway. nging the focus method oting pictures while keeping the subject in focus oting pictures with the focus on subjects moving back forth ng to light the illuminator in a dark place oting pictures using digital image stabilization d4321_e_unifild_Print_00_bookfile.book Page 27 Tuesday, December 19, 2006 11:20 AM
Page: 28
28 EN Menu operations Depending on situations such as shooting small subjects or distant backgrounds, it may be advisable to adjust the amount of light emitted by the flash. In addition, this function is useful when increased contrast is desired. Press 12 to adjust, and press o. Selecting an emission level • When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flash modes except [$] (Flash off). It automatically starts recording for about 4 seconds after shooting pictures. When recording, aim the camera microphone at the source of the sound you want to record. w ............................................................ Adjusting the amount of light emitted by the flash +2.0EV to 0.0 to -2.0EV #SYNCRO .............................................................................. Selecting the flash timing #SYNC1 The flash fires right after the shutter fully opens (front curtain). #SYNC2 With the rear curtain, the flash fires just before the shutter closes (rear curtain). You can use this setting to create interesting effects in your picture, such as expressing the movement of a car by showing the tail- lights streaming backwards. The slower the shutter speed, the better the effects turn out. If the shutter speed is faster than 1/200, the flash fires automatically with the front curtain. QFLASH ........................................................................ Setting to use an external flash IN Allows you to take pictures using the built-in flash. SLAVE When using a commercially available slave flash that is synchronized with the camera flash, the amount of the light emitted by the flash can be adjusted in 10 levels. Press 12 to select an emission level from [1] to [10], then press o. The bigger number indicates the bigger amount of light emitted by the flash. • The flash can fire in sequential shooting mode, but the interval between shots will be longer if a high emission level is set. R (still pictures) ......................................................... Recording sound with still pictures OFF /ON sting the amount of light emitted by the flash cting the flash timing When the shutter speed is set to 4 sec. Front curtain 4 sec. 4 sec. Rear curtain flash fires Rear curtain Front curtain flash fires Shutter closes 0 Shutter button completely pressed ng to use an external flash 1 SLAVE FLASH OK SET BACK MENU ording sound with still pictures d4321_e_unifild_Print_00_bookfile.book Page 28 Tuesday, December 19, 2006 11:20 AM
Page: 29
EN 29 Menu operations Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software from the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting. Use the arrow pad to specify at which edge you want to connect the pictures, and then compose your shots so that the edges of the pictures overlap. The part of the previous picture that will be combined will not remain in the frame. Remember the frame displayed on the monitor as a rough indication, then compose the shot so that the edges of the previous picture in the frame overlap with the next shot. • Press o to exit panorama shooting. • Panorama shooting is possible for up to 10 pictures. A warning mark g is displayed after 10 pictures are taken. PANORAMA ....................................................................... Creating a panoramic picture > .................................................................. Adjusting the white balance compensation • The white balance can be adjusted in 7 increments in both the [BLUE] and [RED] directions. Press o after setting is complete. 1 : Each press makes the color more blue. 2 : Each press makes the color more red. ting a panoramic picture Connects pictures from left to right Connects pictures from bottom to top 3: The next picture is connected at the right edge. 4: The next picture is connected at the left edge. 1 : The next picture is connected at the top. 2: The next picture is connected at the bottom. sting the white balance compensation OK SET BACK MENU > RED RED BLUE BLUE d4321_e_unifild_Print_00_bookfile.book Page 29 Tuesday, December 19, 2006 11:20 AM
Page: 30
30 EN Menu operations • This function may not work effectively with some shooting conditions or subjects. SHARPNESS ........................................................... Adjusting the sharpness of the image 1 (Toward +) : The image contours are emphasized, making the image appear sharper and more vivid. Use this setting when you want to print pictures. If you adjust the sharpness too far toward +, noise may become conspicuous in the picture. 2 (Toward –) : The image contours are softened. Use this setting when you want to edit images on a computer. CONTRAST ................................................................ Adjusting the contrast of the image 1 (Toward +) : The light and dark areas are defined more clearly, making the image look crisper. 2 (Toward –) : The light and dark areas become less defined, giving the image a softer impression. Use this setting when you want to edit images on a computer. SATURATION ........................................................... Adjusting the saturation of the image 1 (Toward +) : Colors become stronger. 2 (Toward –) : Colors become weaker. NOISE REDUCT. .............................................. Reducing the noise during long exposures OFF Noise is not reduced. Noise may be conspicuous at slow shutter speeds. ON Noise is reduced. Shooting time takes twice as long as usual. Shooting is not available during noise reduction. Noise reduction can only be used when the shutter speed is slower than 1/2 sec. sting the sharpness of the image 2 1 3 4 5 CAMERA MENU CAMERA MENU R PANORAMA > SHARPNESS CONTRAST OK SET MENU BACK 0 sting the contrast of the image 2 1 3 4 5 CAMERA MENU CAMERA MENU R PANORAMA > SHARPNESS CONTRAST OK SET MENU BACK 0 sting the saturation of the image OK SET MENU BACK 2 1 3 4 5 CAMERA MENU CAMERA MENU SATURATION NOISE REDUCT. TIMELAPSE 0 ucing the noise during long exposures d4321_e_unifild_Print_00_bookfile.book Page 30 Tuesday, December 19, 2006 11:20 AM
Page: 31
EN 31 Menu operations • If you will be taking pictures over a long period, make sure to use fully charged batteries or the AC adapter. • If any of the following operations occur during sleep mode, the camera cancels the timelapse mode and returns to normal shooting. Opening the battery compartment cover, opening the card cover, connecting the camera to a computer, operating the shutter button, arrow pad or other button. • From 4 seconds prior to taking a picture until the time the picture has been taken, all operation buttons, the mode dial and zoom lever do not function. • If the internal memory/card becomes full or the battery power runs out during sleep mode, a warning is displayed, timelapse stops and the camera automatically turns off. Set this function when shooting with the camera using a conversion lens (option) specified by Olympus. • Using the built-in flash with the conversion lens attached can cause vignetting. Use an external flash if required. • When the conversion lens is attached, the camera may take some time to focus. • If the camera is more than 1 m (3.3 ft.) away from the source of the sound, sound may not be recorded clearly. • When [R] (movies) is set to [ON], [IMAGE STABILIZER] is not available. • If [FULLTIME AF] is set to [ON] when [R] (movies) is set to [ON], the sound of operating lens may be recorded. This function allows you to turn off operational sounds that occur during shooting and playback, warning beeps, shutter sounds, etc. TIMELAPSE .............................. Shooting pictures automatically as defined by set conditions OFF Timelapse shooting is deactivated. ON Timelapse shooting is activated. When setting the timelapse shooting • Press 4 3 to select [PICTURES] and [INTERVAL]. • Press 12 to set the value. • Press o to set. • The first picture is taken when the shutter button is pressed, and the pictures thereafter are automatically taken. • During timelapse, the L mark lights on the monitor. • When recording to either the internal memory or the card, and after the first picture is taken, the camera enters sleep mode. The camera automatically reactivates from sleep mode 4 seconds prior to taking the next picture. • When the preset number of pictures is taken, the camera automatically turns off. 1 ........................................................................... Shooting pictures with conversion lens OFF /ON R (movies) ......................................................................... Recording sound with movies OFF /ON 5 SILENT MODE Setting to turn off operational sounds OFF /ON oting pictures automatically as defined by set itions OK SET MENU BACK 02 PICTURES INTERVAL 01 MIN TIMELAPSE Number of shots: 2 to 99 Shooting interval: 1 to 99 minutes in 1 minute intervals oting pictures with conversion lens ording sound with movies ng to turn off operational sounds d4321_e_unifild_Print_00_bookfile.book Page 31 Tuesday, December 19, 2006 11:20 AM
Page: 32
32 EN Menu operations g “SETUP menus” (P.39) “SILENT MODE Setting to turn off operational sounds” (P.31) • The factory default settings are displayed in gray ( ). • Only the first frame of each movie is displayed. • After setting music [BGM] and [TYPE], press o to start the slideshow. • Press o or m to cancel the slideshow. Playback mode menu When the still picture is selected 5EDIT 7PLAYBACK MENU RAW DATA EDIT Q P REDEYE FIX BLACK & WHITE SEPIA FRAME LABEL CALENDAR LAYOUT BRIGHTNESS SATURATION INDEX EDIT MOVIE INDEX 0 y*2 INDEX PLAY R*2 *1 A card is required. *2 This is not displayed when a movie is selected. *3 This is not selected when the movie is selected. When the move is selected 1 SLIDESHOW Playing back pictures automatically • Set music [BGM] to [ON] or [OFF]. • Select the transition effect between pictures from [TYPE]. BGM ON /OFF TYPE NORMAL /SCROLL/FADER/ SLIDE/ZOOM DOWN/ZOOM UP/CHECKER BOARD/BLINDS/SWIVEL/RANDOM q OK MENU SET EXIT P PRINT PRINT ORDER ORDER PRINT ORDER SETUP SETUP SETUP SILENT SILENT MODE MODE SILENT MODE ERASE ERASE ERASE INDEX INDEX INDEX CALENDAR CALENDAR CALENDAR SLIDE- SLIDE- SHOW SHOW SLIDE- SHOW EDIT EDIT EDIT PLAYBACK PLAYBACK MENU MENU PLAYBACK MENU 1 3 4 5 8 6 7 *1*3 OK MENU SET EXIT P PRINT PRINT ORDER ORDER PRINT ORDER SETUP SETUP SETUP SILENT SILENT MODE MODE SILENT MODE PLAYBACK PLAYBACK MENU MENU PLAYBACK MENU EDIT EDIT EDIT MOVIE MOVIE PL PL AY MOVIE PL AY CALENDAR CALENDAR CALENDAR INDEX INDEX INDEX ERASE ERASE ERASE 2 3 4 5 8 7 ng back pictures automatically OK SET MENU BACK SLIDESHOW OFF ON BGM TYPE [ I N ] d4321_e_unifild_Print_00_bookfile.book Page 32 Tuesday, December 19, 2006 11:20 AM
Page: 33
EN 33 Menu operations Operations during movie playback • Press o to pause the playback. Operations during pause • To resume the movie, press o. • To cancel the playback of the movie in the middle of it or during pause, press m. This function lets you playback the pictures in a calendar format, organized by the date the images were recorded. This function lets you view the pictures in 9 frames at the same time. g “Zoom Lever Zooming while shooting/close-up playback” (P.13) 2 MOVIE PLAY Playing back movies Select [MOVIE PLAY] from the top menu, and press o to play back the movie. • Another option is to select a picture with the movie icon (A) in the playback mode, and press o to play back the movie. Playing time/Total recording time 1 : Increases the volume. 2 : Reduces the volume. 3 : Each time you press the button, the playback speed changes in the following order: 2×; 20× and 1×. 4 : Plays the movie in reverse. Each time you press the button, the playback speed changes in the following order: 1×; 2×; 20×; and back to 1×. 1 : Displays the first frame. 2 : Displays the last frame. 3 : Displays the next frame. 4 : Displays the previous frame. 3 CALENDAR Playing back the pictures in a calendar format 4 INDEX Viewing the pictures as a thumbnail ng back movies 12:30 12:30 '07.08.26 '07.08.26 100-0004 100-0004 [IN IN] OK MOVIEPLA Y 4 ng back the pictures in a calendar format ing the pictures as a thumbnail d4321_e_unifild_Print_00_bookfile.book Page 33 Tuesday, December 19, 2006 11:20 AM
Page: 34
34 EN Menu operations This function lets you edit still pictures saved on a card and store them as new pictures. Adjusts the pictures recorded in raw data format and stores them as new pictures in JPEG format. Items that can be set with [RAW DATA EDIT]. * Available only when the picture is taken with [WB] set to [V]. This changes the image size of a picture and saves it as a new file. Designates and crops part of a still picture and saves it as a new file. Corrects the red-eye look that often occurs when taking pictures with a flash and saves it as a new file. This changes the picture to black and white and saves it as a new file. This changes the picture to sepia and saves it as a new file. 5 EDIT RAW DATA EDIT ....................................... Editing the pictures recorded in raw data format Item Settings Ref. Page IMAGE QUALITY SHQ/HQ/SQ1/SQ2/16 : 9 P.21 WB AUTO/PRESET/V* P.23 > RED7 - BLUE7 P.29 SHARPNESS -5 - + 5 P.30 CONTRAST -5 - + 5 P.30 SATURATION -5 - + 5 P.30 Q ...................................................................................... Changing the size of pictures 640x480 / 320x240 P .......................................................................................... Cropping a part of pictures • Press 4 3 to select the image to crop, and press o. • Use the arrow pad and the zoom lever to set the position and size of the picture, and press o. REDEYE FIX ....................................................................... Fixing the red-eye in pictures BLACK & WHITE ..................................................... Changing pictures to black and white SEPIA ............................................................................ Changing pictures to a sepia tone ng the pictures recorded in raw data format nging the size of pictures ping a part of pictures OK SET W O T g the red-eye in pictures nging pictures to black and white nging pictures to a sepia tone d4321_e_unifild_Print_00_bookfile.book Page 34 Tuesday, December 19, 2006 11:20 AM
Page: 35
EN 35 Menu operations This function lets you select a frame, integrate the frame with an image, and save it as a new picture. This function lets you select a label, integrate the label with an image, and save it as a new picture. This function lets you select a calendar format, integrate the calendar with a picture, and save it as a new file. FRAME .................................................................................. Add a frame to your picture • Select a frame with 4 3 and press o. • Select the picture to be synthesized with the frame with 4 3, and press o. (Press 12 to turn the picture 90 degrees clockwise or 90 degrees counterclockwise.) • Use the arrow pad and the zoom lever to adjust the position and size of the picture, and press o. LABEL .................................................................................... Add a label to your picture • Select the picture with 4 3 and press o. • Select the label with 4 3, and press o. (Press 12 to rotate the picture 90° clockwise or counterclockwise.) • Use the arrow pad and the zoom lever to adjust the position and size of the picture, and press o. • Set the color of the title with the arrow pad, and press o. CALENDAR ......................................................... Create a calendar print with your picture • Select the picture with 4 3 and press o. • Select the calendar with 4 3, and press o. (Press 12 to rotate the picture 90° clockwise or counterclockwise.) • Set the date of the calendar, and press o. LAYOUT ..................................................................... Creating an index layout of pictures ALL IMAGES All pictures in the internal memory or the card are added to the layout. CALENDAR A monthly calendar appears and the pictures you want to make layout are selected by the date. SEL. IMAGE Pictures that you want to make layout are specified one by one. • Press 4 3 to select a layout, and press o. • Select the type of layout picture, and press o. • Select the pictures and press o. (When [SEL. IMAGE] is selected in [LAYOUT] screen, press 12 to rotate the picture 90° clockwise or counterclockwise.) a frame to your picture OK W O T SET MOVE FRAME a label to your picture OK SET LABEL te a calendar print with your picture OK SET CALENDAR ting an index layout of pictures OK MENU SET BACK LAYOUT ALL IMAGES CALENDER SEL.IMAGE d4321_e_unifild_Print_00_bookfile.book Page 35 Tuesday, December 19, 2006 11:20 AM
Page: 36
36 EN Menu operations This function lets you adjust the brightness of a picture and save it as a new picture. This function lets you adjust the vividness of the picture, and store it as a new picture. This function extracts 9 frames from a movie and saves them as a new picture (INDEX) containing thumbnails of each frame. Allows you to specify a part of the movie and overwrite it, or save it as a new movie. BRIGHTNESS ........................................................... Change the brightness of the picture • Select the picture with 4 3 and press o. • Adjust the brightness with 12, and press o. SATURATION ............................................................. Change the vividness of the picture • Select the picture with 4 3 and press o. • Adjust the vividness with 12, and press o. INDEX ...................................................................... Making an index picture from a movie • Use 4 3 to select a movie and press o. • Use the arrow pad to select the first frame of the part you want to keep, and press o. In the same manner, select the last frame of the part you want to keep and press o. EDIT ................................................................................... Extracting a part of the movie • Select [NEW FILE] or [OVERWRITE], and press o. • Use the arrow pad to select the first frame of the part you want to keep, and press o. In the same manner, select the last frame of the part you want to keep and press o. nge the brightness of the picture OK MENU SET BACK BRIGHTNESS nge the vividness of the picture OK MENU SET BACK SATURATION ng an index picture from a movie OK SET 00:00 00:00/00:36 00:36 acting a part of the movie OK SET 00:00 00:00/00:36 00:36 d4321_e_unifild_Print_00_bookfile.book Page 36 Tuesday, December 19, 2006 11:20 AM
Page: 37
EN 37 Menu operations Allows you to capture a still image from the movie, which is taken and record in JPEG format. This function allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. g“Print settings (DPOF)” (P.50) Pictures taken with the camera held vertically are displayed horizontally during playback. This function allows you to turn such pictures so that they are displayed vertically. New picture orientations are saved even when the power is turned off. Select the picture with 4 3, and rotate it by selecting [+90°], [0°] or [–90°] with 12. You can rotate several frames in succession. MOVIE INDEX ......................................................... Capturing a still image from the movie • Use 4 3 to select a movie and press o. • Use the arrow pad to select the frame to capture, and press o. 6 PRINT ORDER Making print reservations (DPOF) 7 PLAYBACK MENU 0 ................................................................................................... Protecting pictures OFF /ON Protected pictures cannot be erased with [ERASE]/[SEL.IMAGE]/ [ALL ERASE], but they are all erased by formatting. • Select the picture with 4 3, and protect it by selecting [ON] with 12. You can protect several frames in succession. When a picture is protected, 9 is displayed on the monitor. y ........................................................................................................ Rotating pictures +90°/ 0° /–90° uring a still image from the movie OK SET MENU BACK [ x D ] MOVIE INDEX ng print reservations (DPOF) ecting pictures OK EXIT OFF ON [ I N ] 0 ting pictures OK EXIT [ I N ] y +90° OK [ I N ] EXIT y 0° –90° OK EXIT [ I N ] d4321_e_unifild_Print_00_bookfile.book Page 37 Tuesday, December 19, 2006 11:20 AM
Page: 38
38 EN Menu operations Protected pictures cannot be erased. Cancel protection before erasing protected pictures. Once erased, pictures cannot be restored. Check each picture before erasing to avoid accidentally erasing pictures you want to keep. • When erasing the picture in the internal memory, do not insert the card into the camera. • When erasing the picture from the card, insert a card into the camera in advance. • Select [YES], and press o. INDEX PLAY ................................................... Selecting the playback position of the movie • Use the arrow pad to select a frame. Push or pull the zoom lever to change the number of displayed index frames. • Press o. Movie playback begins from the selected frame. R ........................................................................................ Adding sound to still pictures YES / NO Sound is recorded for about 4 seconds. • Use 4 3 to select a picture, and use 12 to select [YES] to record. • The [BUSY] bar will be temporarily displayed. 8 ERASE Erase selected pictures/Erase all pictures SEL.IMAGE ............................................................................. Selecting images to erase • Use the arrow pad to select a picture, and press o to add R. • Press o again to cancel the selection. • When the selection is completed, press S. • Select [YES], and press o. ALL ERASE ................................... Erase all the pictures in the internal memory and the card cting the playback position of the movie ng sound to still pictures OK SET BACK MENU YES NO [ I N ] R e selected pictures/Erase all pictures cting images to erase MENU S SEL. IMAGE SEL. IMAGE [ I N ] GO BACK OK e all the pictures in the internal memory and the card d4321_e_unifild_Print_00_bookfile.book Page 38 Tuesday, December 19, 2006 11:20 AM
Page: 39
EN 39 Menu operations *1 A card is required. *2 The sound is turned off regardless the setting when [SILENT MODE] is set to [ON]. g “SILENT MODE Setting to turn off operational sounds” (P.31) • Some items are not available depending on the position of the mode dial. g “Functions available in shooting modes and scene modes” (P.72) All existing data, including protected pictures, are erased when the internal memory or card is formatted. Make sure that you save or transfer important data to a computer before formatting. • Make sure there is no card inserted in the camera when formatting the internal memory. • Be sure that the card is inserted in the camera when formatting the card. • Before using non-Olympus cards or cards which have been formatted on a computer, you must format them with this camera. Insert the optional card into the camera. Copying data does not erase the picture in the internal memory. • It takes some time to back up data. Check if the battery is not empty before starting the copy, or use the AC adapter. You can select a language for on-screen display. Available languages vary depending on the area where you purchased this camera. You can add other languages to your camera with the provided OLYMPUS Master software. SETUP menus Shooting mode SETUP MEMORY FORMAT (FORMAT)*1 BACKUP*1 W PW ON SETUP*2 SCREEN SETUP BEEP*2 8*2 SHUTTER SOUND*2 VOLUME*2 REC VIEW FILE NAME PIXEL MAPPING s X DUALTIME ALARM CLOCK VIDEO OUT FRAME ASSIST u MY MODE SETUP m/ft CUSTOM BUTTON Playback mode MEMORY FORMAT (FORMAT).............................. Formatting the internal memory or card BACKUP ............................................... Copying pictures in the internal memory to the card W .................................................................................... Selecting a display language OK MENU SET EXIT RESET RESET RESET SCN SCN SCN SILENT SILENT MODE MODE SILENT MODE SCN SCN SETUP SETUP SETUP IMAGE IMAGE QUALITY QUALITY IMAGE QUALITY CAMERA CAMERA MENU MENU CAMERA MENU OK MENU SET EXIT P SLIDE- SLIDE- SHOW SHOW SLIDE- SHOW EDIT EDIT EDIT PRINT PRINT ORDER ORDER PRINT ORDER CALENDAR CALENDAR CALENDAR INDEX INDEX INDEX ERASE ERASE ERASE SILENT SILENT MODE MODE SILENT MODE SETUP SETUP SETUP PLAYBACK PLAYBACK MENU MENU PLAYBACK MENU matting the internal memory or card ying pictures in the internal memory to the card cting a display language d4321_e_unifild_Print_00_bookfile.book Page 39 Tuesday, December 19, 2006 11:20 AM
Page: 40
40 EN Menu operations You can select the types of the sound and the picture displayed when the camera is turned on. • The volume turns to the value set in [VOLUME]. g “VOLUME Adjusting the volume during playback” (P.40) Still pictures in the internal memory or the card can be registered to screen [2] for [PW ON SETUP]. If a picture is already registered, the [IMAGE EXISTING] screen is displayed, giving you the options to retain the currently registered picture or to register a new one. PW ON SETUP ........................................................ Setting the startup screen and sound SCREEN OFF*1 / 1 / 2*2 SOUND OFF (No sound) / 1 / 2 *1 No picture is displayed. *2 The picture registered with [SCREEN SETUP] is displayed. SCREEN SETUP .............................................. Registering a picture as the startup screen BEEP ................................................... Adjusting the volume of beep when button is pressed OFF (No sound) 1 LOW / HIGH 2 LOW / HIGH 8 ................................................................... Adjust the volume of camera warning sound OFF (No sound) / LOW / HIGH SHUTTER SOUND ............................................. Selecting the sound of the shutter button OFF (No sound) 1 LOW / HIGH 2 LOW / HIGH VOLUME ................................................................. Adjusting the volume during playback OFF (No sound) / 1 / 2 / 3 / 4 / 5 REC VIEW ........................................................................... Viewing pictures immediately OFF The picture being recorded is not displayed. This is useful when you want to prepare for your next shot while the previous picture is being recorded. ON The picture being recorded is displayed. This is useful when you want to quickly review the last picture taken. You can resume shooting while the picture is still being displayed. ng the startup screen and sound stering a picture as the startup screen sting the volume of beep when button is pressed st the volume of camera warning sound cting the sound of the shutter button sting the volume during playback ing pictures immediately d4321_e_unifild_Print_00_bookfile.book Page 40 Tuesday, December 19, 2006 11:20 AM
Page: 41
EN 41 Menu operations File names and their folder names for recorded pictures are automatically generated by the camera. File names and folder names respectively include file numbers (0001 to 9999) and folder names (100 to 999), and are named as follows. The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you turn the camera off during pixel mapping, start again. Select [PIXEL MAPPING]. When [START] is displayed, press o. FILE NAME ................................................................. Resetting the file names of pictures RESET This method is useful when grouping files on separate cards. The file number and folder number are reset every time a new card is inserted in the camera. The folder number returns to [No. 100] and the file number returns to [No. 0001]. AUTO This method is useful when you want to manage all your files with sequential numbers. Even if a new card is inserted, the folder number and file number are retained from the previous card. This helps you to manage multiple cards. PIXEL MAPPING ................................................. Adjusting the image processing function s ................................................................................. Adjusting the monitor brightness 1 : Brightens the monitor. 2 : Darkens the monitor. Press o after setting is complete. etting the file names of pictures \DCIM\***OLYMP\Pmdd****.jpg Folder No. (100 - 999) File name Folder name Month (1 - C) Day (01 - 31) File No. (0001 - 9999) Month: Jan. - Sep. = 1 - 9, Oct. = A, Nov. = B, Dec. = C sting the image processing function sting the monitor brightness OK SET MENU BACK s d4321_e_unifild_Print_00_bookfile.book Page 41 Tuesday, December 19, 2006 11:20 AM
Page: 42
42 EN Menu operations The date and time is saved with each image, and is used in the file name. • The first two digits of the [Y] are fixed. • The time is displayed in the 24-hour format. • To set the time precisely, with the cursor at either “minute” or [Y/M/D], press o as the time signal strikes 00 seconds. • The date format is the same as that set with [X]. • The first two digits of the [Y] are fixed. • The time is displayed in the 24-hour format. X ............................................................................................ Setting the date and time Y-M-D (Year-Month-Day) Hour Minute Date formats (Y/M/D, M/D/Y, D/M/Y) m : Exits a setting. DUALTIME .................................................... Setting the date and time in another time zone OFF Switches to the date and time set in [X]. Pictures are recorded with the date and time set in [X]. ON Switches to the date and time set in [DUALTIME]. When setting the dual time, select [ON], and then set the time. Pictures are recorded with the date and time set in [DUALTIME]. m : Exits a setting. ng the date and time MENU CANCEL X Y / M / D Y / M / D Y M D T I M E Y M D T I M E ----.--.-- --:-- ----.--.-- --:-- ng the date and time in another time zone MENU CANCEL DUALTIME Y M D T I M E Y M D T I M E 2007 2007.08 08.26 26 12 12:30 30 d4321_e_unifild_Print_00_bookfile.book Page 42 Tuesday, December 19, 2006 11:20 AM
Page: 43
EN 43 Menu operations • When [X] has not been set, [ALARM CLOCK] is not available. • When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time setting. Setting an alarm • Select [ONE TIME] or [DAILY], and set the alarm time. Operating, shutting off and checking the alarm • Operating the alarm: Turn off the camera. The alarm only operates when the camera is off. • Shutting off the alarm: While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note that pressing o will turn the camera on. After 1 minute of no operation, the alarm stops automatically and the camera turns off when [SNOOZE] is set to [OFF]. • Checking the alarm settings: While the camera is off, press DISP./E to display the set alarm time and the current time for 3 seconds. ALARM CLOCK ..................................................................................... Setting alarms OFF No alarm is set or alarm is canceled. ONE TIME Alarm is activated once. After the alarm goes off, the setting is canceled. DAILY Alarm is activated daily at the set time. • Select [ONE TIME] or [DAILY], and set the alarm time. • You can set snooze or alarm sounds and volume. TIME Sets the alarm time. SNOOZE OFF No snooze is set. ON Alarm is activated every 5 minutes, up to 7 times. ALARM SOUND 1 LOW/MID/HIGH 2 LOW/MID/HIGH 3 LOW/MID/HIGH ng alarms MOVE ALARM CLOCK TIME ALARM SOUND SNOOZE 0 9 : 0 0 0 9 : 0 0 OK SET d4321_e_unifild_Print_00_bookfile.book Page 43 Tuesday, December 19, 2006 11:20 AM
Page: 44
44 EN Menu operations The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV, set the video output according to your TV’s video signal type. • TV video signal types by country/region. Check the video signal type before connecting the camera to the TV. Playing back pictures on a TV Turn off the camera and the TV before connecting. Press DISP./E in shooting mode to display the frame assist and determine the type of frame assist. Press DISP./E in shooting mode to display the histogram. • When set to [DIRECT], the black and white areas are displayed directly on the picture. VIDEO OUT ........................................................................ Playing back pictures on a TV NTSC / PAL NTSC : North America, Taiwan, Korea, Japan PAL : European countries, China FRAME ASSIST .................... Displaying the frame assist/Determining the type of frame assist OFF / w / x u ............................................................................................ Displaying the histogram OFF / ON / DIRECT ng back pictures on a TV Connect to the TV’s video input (yellow) and audio input (white) terminals. AV cable (provided) Connector cover Settings on the camera Press o in playback mode to turn the camera on. • The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display. Settings on the TV Turn the TV on, and set it to video input mode. • For details of switching to video input, refer to your TV’s instruction manual. • Images and the information displayed on the screen may become cropped depending on the TV’s settings. Multi-connector aying the frame assist/Determining the type of frame st aying the histogram d4321_e_unifild_Print_00_bookfile.book Page 44 Tuesday, December 19, 2006 11:20 AM
Page: 45
EN 45 Menu operations Press 12 to select the function you want to set, and press o. g “Functions that can be assigned to My Mode/custom button” (P.71) MY MODE SETUP ........................................ Setting and saving shooting-related functions Types of my mode settings CURRENT Saves the current camera settings. • Select [SET], and press o. Select a MY MODE to save. RESET Restores the factory default settings. • Select [RESET], and press o. • My mode cannot be selected if no setting is saved. * Default settings are saved only in [sMY MODE 1]. CUSTOM Saves settings one by one. • Select the item to save in my mode, and press 3 or o. • Change setting of the item, and press o. g “Functions that can be assigned to My Mode/ custom button” (P.71) m/ft ......................................................... Setting the measurement unit during manual focus m Displays in meters and centimeters. ft Displays in feet and inches. CUSTOM BUTTON ........................................... Assigning functions to the custom buttons ng and saving shooting-related functions OK SET MENU BACK 2 1 4 3 5 S E T U P ALARM CLOCK VIDEO OUT FRAME ASSIST u MY MODE SETUP CURRENT RESET CUSTOM OK MY MODE SETUP SET CANCEL SET SET CURRENT SETTING SET CURRENT SETTING MENU BACK OK SET MENU BACK My1/2/3/4 r1 MY MODE1 r2 MY MODE2 r3 MY MODE3 r4 MY MODE4 OK MY MODE SETUP RESET CANCEL SET RESET CURRENT SETTING RESET CURRENT SETTING MENU BACK MY MODE SETUP 0.0 P/A/S/M/SCENE SHUTTER FLASH MODE F FNo. ng the measurement unit during manual focus gning functions to the custom buttons d4321_e_unifild_Print_00_bookfile.book Page 45 Tuesday, December 19, 2006 11:20 AM
Page: 46
46 EN Printing pictures Printing pictures By connecting the camera to a PictBridge-compatible printer, you can print pictures directly - no computer necessary. Select the pictures you want to print and the number of prints using the camera’s print menus. To find out if your printer is compatible with PictBridge, refer to the printer’s instruction manual. What is PictBridge? A standard for connecting digital cameras and printers of different makers and printing out pictures directly. [EASY PRINT] can be used to print out the picture displayed on the monitor. The selected picture is printed using the standard settings of your printer. The date and file name are not printed. STANDARD All printers that support PictBridge have standard print settings. If [STANDARD] is selected on the settings screens (P.48 - P.49), pictures are printed according to these settings. Refer to the printer’s instruction manual for its standard settings or contact the printer manufacturer. 1 Display the picture you want to print out on the monitor in the playback mode. 2 Turn the printer on and plug the USB cable (provided) into the camera’s multi-connector and the printer’s USB port. • The [EASY PRINT START] screen is displayed. • For details of how to turn the printer on and the position of the USB port, refer to the printer’s instruction manual. Direct printing (PictBridge) Using the direct printing function • Available printing modes, paper sizes etc., vary depending on the printer you use. Refer to the instruction manual for your printer. • For details of printing paper types, ink cassettes, etc., refer to the printer’s instruction manual. Easy print Multi-connector USB cable Connector cover d4321_e_unifild_Print_00_bookfile.book Page 46 Tuesday, December 19, 2006 11:20 AM
Page: 47
EN 47 Printing pictures 3 Press q. • Printing starts. • When printing is finished, the picture selection screen is displayed. To print another picture, press 4 3 to select a picture, and press q. • When you are finished, disconnect the USB cable from the camera with the picture selection screen displayed. 4 Disconnect the USB cable from the camera. 5 Disconnect the USB cable from the printer. You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With the camera turned off or in shooting mode, connect the USB cable. The selection screen for the USB connection is displayed. Select [EASY PRINT]. g “EASY PRINT” Step 3(P.47), “CUSTOM PRINT” Step 2(P.48) PC / CUSTOM PRINT EASY PRINT START OK PRINT EXIT d4321_e_unifild_Print_00_bookfile.book Page 47 Tuesday, December 19, 2006 11:20 AM
Page: 48
48 EN Printing pictures 1 Display the screen being indicated on the right according to the procedure 1 and 2 in P.46, and press o. 2 Select [CUSTOM PRINT] and press o. 3 Follow the operation guide to adjust print settings. Note • If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and [PICS/SHEET] are set to the standard. Other print modes and print settings (CUSTOM PRINT) Selecting a print mode PRINT Prints the selected picture. ALL PRINT Prints all the pictures stored in the internal memory or the card. MULTI PRINT Prints one picture in multiple layout format. ALL INDEX Prints an index of all the pictures stored in the internal memory or the card. PRINT ORDER Prints the pictures according to the print reservation data on the card. If no print reservations have been made, this option is not available. g“Print settings (DPOF)” (P.50) Setting the print paper SIZE Choose from the available paper sizes on your printer. BORDERLESS Select with or without borders. In [MULTI PRINT] mode, you cannot print with a border. OFF ( ) The picture is printed inside a blank frame. ON ( ) The picture is printed filling the entire page. PICS/SHEET Available in [MULTI PRINT] mode only. The number of prints that can be printed vary depending on the printer. OK SET U S B [ I N ] PC EASY PRINT CUSTOM PRINT EXIT Operation guide OK MENU EXIT SET PRINT MODE SELECT [ I N ] PRINT ALL PRINT MULTI PRINT ALL INDEX OK SET MENU BACK PRINTPAPER SIZE SIZE BORDERLESS BORDERLESS [ I N ] SIZE BORDERLESS STANDARD STANDARD d4321_e_unifild_Print_00_bookfile.book Page 48 Tuesday, December 19, 2006 11:20 AM
Page: 49
EN 49 Printing pictures Press 4 3 to select the picture you want to print. You can also use the zoom lever and select a picture from the index display. 4 Select [PRINT] and press o. • Printing starts. • When printing is finished, the [PRINT MODE SELECT] screen is displayed. To cancel printing 5 In the [PRINT MODE SELECT] screen, press m. • A message is displayed. Selecting the picture to print PRINT Prints one copy of the selected picture. When [SINGLE PRINT] or [MORE] has been selected, a single copy or more copies are printed. SINGLE PRINT Makes a print reservation for the displayed picture. MORE Sets the number of prints and data to be printed for the displayed picture. Setting the number of prints and data to be printed <x Sets the number of prints. You can select up to 10 prints. DATE( ) If you select [WITH], pictures are printed with the date. FILE NAME( ) If you select [WITH], pictures are printed with the file name. P Use the arrow pad or the zoom lever to adjust trimming size and position, and press o. The trimmed picture is printed. OK PRINT SINGLEPRINT MORE 100-0004 100-0004 [IN IN] OK SET MENU BACK PRINT INFO 1 WITHOUT WITHOUT DATE FILE NAME P <x [ I N ] OK SET MENU BACK PRINT [ I N ] PRINT CANCEL OK CANCEL TRANSFERRING OK [ I N ] SET PRINT CONTINUE CANCEL Screen during data transfer Press o. Select [CANCEL], and press o. OK MENU EXIT SET PRINT MODE SELECT [ I N ] PRINT ALL PRINT MULTI PRINT ALL INDEX d4321_e_unifild_Print_00_bookfile.book Page 49 Tuesday, December 19, 2006 11:20 AM
Page: 50
50 EN Printing pictures 6 Disconnect the USB cable from the camera. 7 Disconnect the USB cable from the printer. Print reservation allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. With print reservation, you can print out pictures easily either at home using a personal DPOF- compatible printer or at a photo store that supports DPOF. DPOF is a standard format used to record automatic print information from digital cameras. Pictures with print reservations can be printed using the following procedures. Printing using a DPOF-compatible photo store. You can print the pictures using the print reservation data. Printing using a DPOF-compatible printer. Printing is possible directly from a card containing print reservation data, without using a computer. For more details, refer to the printer’s instruction manual. A PC card adapter may also be necessary. Note • DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. If a card contains DPOF reservations set by another device, entering reservations using this camera may overwrite the previous reservations. • You can make DPOF print reservations for up to 999 images per card. • Not all functions may be available on all printers, or at all photo stores. To use print services without using DPOF • Pictures stored in the internal memory cannot be printed at a photo store. The pictures need to be copied to a card before taking them. g “BACKUP Copying pictures in the internal memory to the card” (P.39) Print settings (DPOF) How to make print reservations Only the images stored on the card can be reserved to print. Insert a card with recorded pictures into the camera before making print reservations. d4321_e_unifild_Print_00_bookfile.book Page 50 Tuesday, December 19, 2006 11:20 AM

Question & answers

Have a question about the Olympus SP-550UZ but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus SP-550UZ. Please make sure that you describe your difficulty with the Olympus SP-550UZ as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus SP-550UZ

Name
Email
Reaction

View a manual of the Olympus SP-550UZ below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: SP-550UZ
  • Filetype: PDF
  • Available languages: Norwegian, English