ED 300mm f4.0 IS PRO
Printed in China
date of issue 2015.9
61 - PL INSTRUKCJA
64 - PT INSTRUÇÕES
67 - RO INSTRUCŢIUNI
70 - SR UPUTSTVO ZA UPOTREBU
73 - RU ИНСТРУКЦИЯ
77 - SV BRUKSANVISNING
80 - SL NAVODILA
83 - SK NÁVOD NA POUŽITIE
86 - TR TALİMATLAR
89 - UK ІНСТРУКЦІЯ
94 - AR
95 - TH คําแนะนําการใชงาน
98 - KR 취급설명서
101- CHT 使⽤說明書
04 - JP 取扱説明書
07 - EN INSTRUCTIONS
11 - ES INSTRUCCIONES
15 - FR MODE D’EMPLOI
19 - BG ИНСТРУКЦИИ
22 - CS NÁVOD K POUŽITÍ
25 - DE BEDIENUNGSANLEITUNG
28 - DA BETJENINGSVEJLEDNING
31 - ET JUHISED
34 - FI KÄYTTÖOHJEET
37 - EL ΟΔΗΓΙΕΣ
40 - HR UPUTE
43 - HU HASZNÁLATI ÚTMUTATÓ
46 - IT ISTRUZIONI
49 - LT INSTRUKCIJA
52 - LV NORĀDĪJUMI
55 - NL AANWIJZINGEN
58 - NO INSTRUKSJONER
Thank you for purchasing this Olympus product.
To ensure your safety, please read this
instruction manual before use, and keep it
handy for future reference.
Names of parts
1 Distance indicator
2 Focus ring
3 Focus limiter switch
4 IS switch
5 L-Fn button
6 Decoration ring
7 Tripod mount
8 Lens hood
Changing focus methods
Change between AF/MF by sliding the focus ring.
A: Position in which distance indicator cannot
be seen AF/MF
You can switch between AF/MF by using the
B: Position in which distance indicator can be
AF does not operate. Rotate the focus ring
to adjust the focus.
Focus limiter switch
Sets the range of the photographing distance.
Focusing is done within the range that is set.
ON: Stabilizing functions in the lens and
camera operate. The IS operates according
to the IS setting in the camera.
OFF: Stabilizing functions in both the lens and
camera are off.
About the stabilizing functions
Please use the latest firmware for the camera.
Operation of this function will change in the
following cameras. For more information, please
visit our home page.
E-M5, E-M10 series, E-P series, E-PL series,
Contact the other manufacturer to mount the
lens on another manufacturer’s digital camera.
The AF stops functioning while the button is
Removing the tripod mount and attaching
the decoration ring
Removing the tripod mount:
Turn the knob of the tripod mount to the left to
loosen it 1. Turn the tripod mount to the left,
align it with the mark 2, and remove it from the
lens body 3.
Attaching the decoration ring:
Align the marks and insert the decoration ring 1,
then turn it to the right until it stops (until you hear
it snap) 2.
How to use the lens hood
Pull it outward until it stops 1, and then turn it
to the right 2.
The lens hood cannot be removed from the lens.
Notes on Shooting
• Edges of pictures may be cut off if more than
one filter is used or if a thick filter is used.
• When using a flash, flash light may be blocked
by the lens body, lens hood, etc.
• The focus distance may change when the
focusing method is switched from MF to AF/MF
and then back to MF. Readjust the focus distance.
• The distance indicator is intended as a guide only.
• Usage conditions may lower the number of
images that can be captured.
• Do not hold only the camera body without
holding the lens. The waterproofing
characteristic or optical performance may not
Mount : Micro Four Thirds mount
Focal distance : 300 mm (equivalent to 600
mm on a 35 mm camera)
Max. aperture : f4.0
Image angle : 4.1°
Lens configuration : 10 groups, 17 lenses
Iris control : f4.0 to f22
Shooting range : 1.4 m (55.1 in.) to )
Focus adjustment : AF/MF switching
Weight : 1,270 g (44.8 oz.)
(excluding cap, tripod
mount and decoration ring)
Dimensions : Max. dia. Ø 92.5 (3.6 in.) ×
length 227 mm (8.9 in.)
Lens hood : Internal
Filter mount thread diameter : Ø 77 mm (3.0 in.)
Can be used with the MC-14
* Specifications are subject to change without any
notice or obligation on the part of the manufacturer.
Precautions: Be Sure to Read the Following
Warnings: Safety Precautions
• Do not view the sun through the lens. It may
cause blindness or vision impairment.
• Do not leave the lens without the cap. If solar
light is converged through the lens, a fire may
• Do not point the camera lens at the sun.
Sunlight will converge in the lens and focus
inside the camera, possibly causing a
malfunction or fire.
Micro Four Thirds and the Micro Four Thirds
logo are trademarks or registered trademarks of
For customers in North America, Central
America, South America and the Caribbean
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including
interference that may cause undesired
Any unauthorized changes or modifications
to this equipment would void the user’s
authority to operate.
This Class B digital apparatus complies with
Canadian ICES-003. CAN ICES-3(B)/NMB-3(B)
Technical Support (U.S.A. / Canada)
24/7 online automated help :
Phone customer support :
Our phone customer support is available
from 9 am to 9 pm (Monday to Friday) ET
E-Mail : email@example.com
For customers in Europe
The “CE” mark indicates that this
product complies with the European
requirements for safety, health,
environment and customer
protection. CE-mark products are for
sale in Europe.
This symbol [crossed-out wheeled
bin WEEE Annex IV] indicates
separate collection of waste
electrical and electronic equipment
in the EU countries.
Please do not throw the equipment
into the domestic refuse.
Please use the return and collection
systems available in your country
for the disposal of this product.
European Technical Customer Support
Please visit our homepage
or call: Tel. 00800 - 67 10 83 00 (Toll-free)
+49 40 - 237 73 899 (Charged)