FL-300R

Olympus FL-300R manual

FL-300R

User manual for the Olympus FL-300R in Dutch. This PDF manual has 162 pages.

Page: 1
© 2011 VR516401 Printed in China Electronic Flash FL-300R 7 - EN INSTRUCTIONS 17 - CS NÁVOD K POUŽITÍ 27 - DE BEDIENUNGSANLEITUNG 37 - DA BETJENINGSVEJLEDNING 47 - ET JUHISED 57 - ES INSTRUCCIONES 67 - FI KÄYTTÖOHJEET 77 - FR MODE D’EMPLOI 87 - HU HASZNÁLATI ÚTMUTATÓ 97 - IT ISTRUZIONI 107- NL AANWIJZINGEN 117 - PL INSTRUKCJA 127- RU ИНСТРУКЦИЯ 137- SL NAVODILA 147- SK NÁVOD NA POUŽITIE R2190_E_cover.indd 1 R2190_E_cover.indd 1 2011/03/21 14:17:46 2011/03/21 14:17:46
Page: 2
3 4 MEMO 1 7 9 5 6 8 2 3 4 1.4 2 2.8 4 5.6 8 11 16 22 100 1.3~14 0.9~10 0.6~7 0.6~5 0.6~3.5 0.6~2.5 0.6~1.7 0.6~1.3 0.6~0.9 200 1.8~20 1.3~14 0.9~10 0.6~7 0.6~5 0.6~3.5 0.6~2.5 0.6~1.7 0.6~1.3 400 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.6~5 0.6~3.5 0.6~2.5 0.6~1.7 800 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.6~5 0.6~3.5 0.6~2.5 1600 5.1~56 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.6~5 0.6~3.5 3200 7.1~80 5.1~56 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.6~5 6400 9.9~112 7.1~80 5.1~56 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 100 0.8~8.5 0.5~6 0.5~4.3 0.5~3 0.5~2.1 0.5~1.5 0.5~1.1 0.5~0.8 0.5 200 1.1~10 0.8~8.5 0.5~6 0.5~4.3 0.5~3 0.5~2.1 0.5~1.5 0.5~1.1 0.5~0.8 400 1.6~17 1.1~10 0.8~8.5 0.5~6 0.5~4.3 0.5~3 0.5~2.1 0.5~1.5 0.5~1.1 800 2.1~24 1.6~17 1.1~10 0.8~8.5 0.5~6 0.5~4.3 0.5~3 0.5~2.1 0.5~1.5 1600 3~34 2.1~24 1.6~17 1.1~10 0.8~8.5 0.5~6 0.5~4.3 0.5~3 0.5~2.1 3200 4.3~48 3~34 2.1~24 1.6~17 1.1~10 0.8~8.5 0.5~6 0.5~4.3 0.5~3 6400 6~69 4.3~48 3~34 2.1~24 1.6~17 1.1~10 0.8~8.5 0.5~6 0.5~4.3 (m) ISO F no. R2190_E_cover.indd 2 R2190_E_cover.indd 2 2011/03/21 14:17:46 2011/03/21 14:17:46
Page: 3
5 Information for Your Safety IMPORTANT SAFETY INSTRUCTIONS When using your photographic equipment, basic safety precautions should always be followed, including the following: Read and understand all instructions before using. Close supervision is necessary when any flash is used by or near children. Do not leave flash unattended while in use. Care must be taken as burns can occur from touching hot parts. y y y book_R2190_Unified.indb 5 book_R2190_Unified.indb 5 2011/03/21 11:24:58 2011/03/21 11:24:58
Page: 4
6 Do not operate if the flash has been dropped or damaged - until it has been examined by qualified service personnel. Let flash cool completely before putting away. To reduce the risk of electric shock, do not immerse this flash in water or other liquids. To reduce the risk of electric shock, do not disassemble this flash, but take it to qualified service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the flash is used subsequently. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. SAVE THESE INSTRUCTIONS y y y y y book_R2190_Unified.indb 6 book_R2190_Unified.indb 6 2011/03/21 11:24:58 2011/03/21 11:24:58
Page: 5
EN 7 Names of parts (Fig. Names of parts (Fig. p. 3) p. 3) 1 Light-emitting area 2 Lock release button 3 Lock pin 4 TEST button/ CHARGE lamp 5 AUTO CHECK lamp 6 ON/OFF button 7 W knob 8 RC switch 9 Remote sensor Continuous firing Continuous firing The flash may become hot when fired many times in succession, resulting in damage or malfunction. The flash should be fired no more than 10 times in succession at intervals of 6 seconds, after which it should be left unused for at least 10 minutes. Preparing a battery Preparing a battery (sold separately) (sold separately) Choose from the below batteries: AAA (R03) alkaline batteries (x 2) AAA (R03) NiMH batteries (x 2) • • x Notes AAA (R03) manganese batteries cannot be used. Loading batteries Loading batteries 1 Open the battery compartment cover. 2 Insert the batteries with correct +/– polarity. 3 Close the battery compartment cover. Battery compartment cover Battery compartment cover Thank you for purchasing this Olympus product. To ensure your safety, please read this instruction manual before use, and keep it handy for future reference. book_R2190_Unified.indb 7 book_R2190_Unified.indb 7 2011/03/21 11:24:58 2011/03/21 11:24:58
Page: 6
8 EN Attaching to the camera Attaching to the camera x Notes Confirm that both the camera and electronic flash are off. Attaching or removing the electronic flash while either the flash or the camera is on may result in malfunction. 1 2 1 Remove the camera hot shoe cover and slide the flash securely into the hot shoe until it clicks into place (1). Do not attach this flash with the built-in flash raised, or the built-in flash may get broken. Remove the flash while pressing the lock release button (2). If the camera has an external flash connector, a flash bracket and bracket cable (sold separately) can be attached. • book_R2190_Unified.indb 8 book_R2190_Unified.indb 8 2011/03/21 11:25:00 2011/03/21 11:25:00
Page: 7
EN 9 Turning on the electronic flash Turning on the electronic flash Attach an electronic flash to the camera, and then turn the camera on. TEST button/ CHARGE lamp ON/OFF button 1 Press and hold the ON/OFF button until any lamp lights. Press the ON/OFF button again to turn the power off. Press the TEST button to fire a test flash when the CHARGE lamp lights. • • Replace the batteries if the CHARGE lamp does not light after: 30 seconds (Alkaline batteries) 10 seconds (NiMH batteries) If the CHARGE lamp and AUTO CHECK lamp blink simultaneously, batteries are running low. Replace the batteries. If no operations are performed for about 15 minutes, the flash will enter sleep mode to save power. The flash will also enter sleep mode whenever the camera enters sleep mode. If no operations are performed for approximately 60 minutes more, the flash will turn off automatically. Press the ON/OFF button to turn it on. • • • book_R2190_Unified.indb 9 book_R2190_Unified.indb 9 2011/03/21 11:25:00 2011/03/21 11:25:00
Page: 8
10 EN Shooting Shooting According to the flash mode setting of the camera, shooting in TTL-AUTO mode or MANUAL mode is available with this flash. RC switch 1 Set the RC switch to “OFF”. 2 In accordance with the intended use, set the flash mode of the camera. For details, refer to the instruction manual of the camera. MANUAL mode is not available for some cameras. In TTL-AUTO mode: When flash activation has been performed correctly, the AUTO CHECK lamp blinks for about 5 seconds after the shooting. In MANUAL mode: Adjust camera settings (ISO sensitivity and aperture value) based on the distance to subject and then shoot. Shooting distance (m) = Guide No. (ISO100) x ISO sensitivity coefficient ÷ Aperture value Available shooting range (Table P.4) ISO sensitivity coefficient ISO sensitivity 25 50 100 200 400 800 1600 3200 6400 Coefficient 0.5 0.71 1.0 1.4 2.0 2.8 4.0 5.6 8.0 When using a flash, flash light may be blocked by the lens body, lens hood, etc. When the shooting distance is closer to 1m, using the wide panel is recommended not to control the flash volume too much. • • • • book_R2190_Unified.indb 10 book_R2190_Unified.indb 10 2011/03/21 11:25:01 2011/03/21 11:25:01
Page: 9
EN 11 Wide angle Wide angle Use the wide panel for shooting when the lens focal length is wider than 9 mm to 14 mm. 1 Slide the W knob to the W side. Folding Folding This flash can be bent approx. 30 degrees in front (1) and 60 degrees in rear (2). It also can be folded in front to make it easier to carry the camera with the flash attached (3). The flash does not fire when folded in front. Approx. 30 degrees in front: Used for macro shooting. Approx. 60 degrees in rear: Used for bounce shooting. book_R2190_Unified.indb 11 book_R2190_Unified.indb 11 2011/03/21 11:25:01 2011/03/21 11:25:01
Page: 10
12 EN Wireless remote control flash photography Wireless remote control flash photography 1 Set the RC switch to A or B. A and B are the group settings. Set the flash control mode, etc. to each groups and control them wirelessly. 2 Set [# RC Mode] to [On] in the menu of the camera to make the flash on the camera ready to fire. 3 Set the flash control mode, etc. in each of the groups A and B on the camera. Flash intensity value 250 250 F5.6 0.0 0.0 P 38 38 A Mode TTL M Off +5.0 TTL +3.0 1/8 – LO 1 Ch Group Select the flash control mode and adjust the flash intensity individually. For MANUAL, select the flash intensity. • Normal flash/Super FP flash Super FP flash is not compliant. • Communication light level Set the communication light level to [HI], [MID], or [LO]. • Channel Be sure to set the channel to [1]. • Flash intensity Flash control mode • book_R2190_Unified.indb 12 book_R2190_Unified.indb 12 2011/03/21 11:25:02 2011/03/21 11:25:02
Page: 11
EN 13 Positioning Positioning Since the communication is performed with the flash emission of the camera, the flash positioning range varies with camera. 1 Attach the stand provided. Slide the flash securely into the stand until it clicks into place (1). Press the shoe lock release button to remove the flash. When using it for bounce, be careful not to drop off the stand (2). • 2 Position the flash facing the desired direction. Instead of using the stand, you can also shoot simply holding the flash. x Notes The built-in flash can not be used as a light source in RC mode. We recommend using a single group of up to three remote flash units. Flash may not fire due to the angle or distance between the camera and the object. Take a test shot after positioning. • • • • 1 2 1 2 book_R2190_Unified.indb 13 book_R2190_Unified.indb 13 2011/03/21 11:25:02 2011/03/21 11:25:02
Page: 12
14 EN Safety precautions Safety precautions Read WARNINGS and CAUTIONS thoroughly to ensure safe usage. These safety precautions protect the users and others and prevent property damage. WARNING Failure to observe the precautions indicated by this symbol may result in injury or death. Do not use product or flash or just omit in places where it may be exposed to flammable or explosive gas. Otherwise, fire ignition or explosion may result. Do not directly solder the product or modify, remodel, or disassemble. Do not cover the light emitting area of the flash with your hand, and do not touch the light emitting area after continuous firing. It may burn your skin. Water and foreign matter inside of the device may cause fire or electric shock. If the device is immersed in or exposed to water or foreign matter is found inside of the device, turn off the power immediately and remove batteries with care. Contact your dealer or consult an Olympus Authorized Service Station. To prevent a traffic accident, do not direct the flash at a person operating a motor vehicle. Do not use a flash close to the subject's eyes; particular care should be observed when photographing infants. Do not leave the flash within the reach of children. The flash light may cause vision disability. Do not use batteries that are not specified for use. Do not mix old and new batteries, or batteries made by different manufacturers. Do not connect substances such as metal to the (+) or (–) of batteries. • • • • • • • • • book_R2190_Unified.indb 14 book_R2190_Unified.indb 14 2011/03/21 11:25:02 2011/03/21 11:25:02
Page: 13
EN 15 CAUTION Failure to observe the precautions indicated by this symbol may result in injury or property damage. If you notice any abnormalities such as odor, noise, or smoke, stop using this device. Otherwise a fire or burn may result. Remove the batteries carefully to avoid burning yourself, and contact your dealer or consult an Olympus Authorized Service Station. Do not operate with wet hands. This may cause malfunction or electric shock. • • European technical Customer Support European technical Customer Support Please visit our homepage http://www.olympus-europa.com or call: Tel. 00800 - 67 10 83 00 (Toll-free) +49 180 5 - 67 10 83 or +49 40 - 237 73 4899 (Charged) For customers in Europe For customers in Europe The “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. CE-mark products are for sale in Europe. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. book_R2190_Unified.indb 15 book_R2190_Unified.indb 15 2011/03/21 11:25:02 2011/03/21 11:25:02
Page: 14
16 EN Specifications Specifications MODEL NO. : FL-300R Product type : External electronic flash for digital still camera Guide number : 20 (ISO 100), 12 (ISO100, using the wide panel) Firing angle : Covering the field angle of 14mm lens (equivalent to 28mm on a 135mm) Covering the field angle of 9mm lens (equivalent to 18mm on a 135mm) : Using the wide panel Flash modes : TTL-AUTO, MANUAL, RC Flash emission period : Approx. 1/20000 to 1/500 seconds Flash emission count (at full activation)* : Approx. 80 times (using AAA (R03) alkaline batteries) Approx. 130 times (using AAA (R03) NiMH batteries) Recharge time : Approx. 5.5 seconds (using AAA (R03) alkaline batteries) Approx. 4.5 seconds (using AAA (R03) NiMH batteries) (from full activation to CHARGE lamp lighting)* Operating environment : Temperature: –10 to 42°C (14 to 108°F) Humidity: 20 to 90% Dimensions : 56.4 (W) × 89.2 (H) × 26.9 (D) mm (2.2 × 3.5 × 1.1 in.) (excluding protrusions) Weight : 97 g (3.4 oz.) (excluding batteries) * Measurements obtained from in-house tests at Olympus. Actual figures may vary depending on shooting conditions. Specifications are subject to change without any notice or obligation on the part of the manufacturer. book_R2190_Unified.indb 16 book_R2190_Unified.indb 16 2011/03/21 11:25:03 2011/03/21 11:25:03
Page: 15
157 Olympus UK Ltd Olympus Service Department Olympus Imaging & Audio KeyMed House, Stock Road Southend-on-Sea, Essex, SS2 5QH, United Kingdom Sales: 0800 111 4777, Service: 0800 111 4888 Facsimile: +44 (0)1702 445134 E-Mail: consumer@olympus.co.uk www.olympus.co.uk BULGARIA REP. OFFICE OLYMPUS C&S blvd. Bulgaria 88, entr. 2, fl.1, ap. 3, 1680 Sofia, Bulgaria www.olympus.bg Rep.office Olympus, tel.: +359 2 854 84 14 OLYMPUS C&S, SPOL. S.R.O. Evropská 176, 160 41 Praha 6, Tel.: +420 800 167777 OLYMPUS EUROPA HOLDING GmbH Consumer Product Division Wendenstr. 14-18, D-20097 Hamburg, Tel.:(040) 237720 Versandadresse Reparaturen: Olympus Deutschland GMBH Bredowstrasse 20, 22113 Hamburg, Tel.:(040) 23773 4121 OLYMPUS DANMARK A/S Tempovej 48–50, 2750 Ballerup, Tlf.: +45 44 73 47 00 OLYMPUS ESTONIA OÜ Järvevana tee 9, 11314 Tallinn www.olympus.ee Tel.: +372 65 49 541 OLYMPUS ESPAÑA S.A.U. Domenico Scarlatti, 11, 28003 Madrid Tel.: +34 902 444 104, Fax: +34 191 343 1917 e-mail: st-consumo@olympus.es OLYMPUS FINLAND OY Äyritie 12 B, 01510 VANTAA, Puh. (09) 875 810 OLYMPUS FRANCE CENTRE TECHNIQUE Parc d’Affaires Silic, 55, rue de Monthléry, 94533 Rungis Cedex, Service clients tél.: 0810 223 223 E-Mail: image-son.sav@olympus.fr Αποκλειστική Διανομή στην Ελλάδα FOTOMATIC S.A. Γραφεία Αθήνας Τσούντα 64, 111 43 Αθήνα Τηλ.: +30 210 21 11 860, Φαξ: +30 210 21 11 850 email: info@fotomatic.gr www.fotomatic.gr Service Αθήνας Τσούντα 64, 111 43 Αθήνα Τηλ.: +30 210 21 11 860, Φαξ: +30 210 21 14 079 email: service@fotomatic.gr, tech@fotomatic.gr Γραφεία Χανίων Μελετίου Πηγά 30, 731 31 Χανιά, Κρήτη Τηλ.: +30 28210 91081, Φαξ: +30 28210 74601 www.olympus.com.gr OLYMPUS D.O.O. ZA TRGOVINU Avenija Većeslava Holjevca 40, HR-10020 Zagreb, Tel.: +385 1 4899 000, Fax: +385 1 4899 029 OLYMPUS HUNGARY KFT. 1382 Budapest 62, Pf. 838, Tel.: +36 1 250 9377 POLYPHOTO S.P.A. Via C. Pavese 11/13, 20090 Opera/Milano, Tel.: (02) – 530021 Olympus Serviso Centras Kareivių g. 19, LT-09133, Vilnius Lietuva, Tel.: +37061459773 email: info@olympus.lt OLYMPUS LATVIA SIA Vienības gatve 87 b, LV-1004 Rīga, Tālr.: +371 67623334 OLYMPUS NEDERLAND B.V. Industrieweg 44, 2382 NW Zoeterwoude Tel.: 0031 (0)71-5821888, www.olympus.nl 17_R2190_address.indd 157 17_R2190_address.indd 157 2011/03/22 9:20:33 2011/03/22 9:20:33

Question & answers

Have a question about the Olympus FL-300R but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus FL-300R. Please make sure that you describe your difficulty with the Olympus FL-300R as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus FL-300R

Name
Email
Reaction

View a manual of the Olympus FL-300R below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Flash units
  • Model/name: FL-300R
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Danish, Polish, Russian, Finnish, Slovak, Hungarian, Slovene, Chinese