FL-14

Olympus FL-14 manual

FL-14

User manual for the Olympus FL-14 in Dutch. This PDF manual has 162 pages.

Page: 1
© 2009 VN272601 Printed in China Electronic Flash FL-14 7 - EN INSTRUCTIONS 17 - CZ NÁVOD K POUŽITÍ 27 - DE BEDIENUNGSANLEITUNG 37 - DK BETJENINGSVEJLEDNING 47 - EE JUHISED 57 - ES INSTRUCCIONES 67 - FI KÄYTTÖOHJEET 77 - FR MODE D’EMPLOI 87 - HU HASZNÁLATI ÚTMUTATÓ 97 - IT ISTRUZIONI 107- NL AANWIJZINGEN 117 - PL INSTRUKCJA 127- RU ИНСТРУКЦИЯ 137- SI NAVODILA 147- SK NÁVOD NA POUŽITIE R2109_15L_cover.indd 1 R2109_15L_cover.indd 1 2009/04/09 15:43:09 2009/04/09 15:43:09
Page: 2
1 5 6 7 8 2 3 4 9 1.4 2 2.8 4 5.6 8 11 16 22 100 0.9~10 0.6~7 0.5~5 0.5~3.5 0.5~2.5 0.5~1.7 0.5~1.3 0.5~0.9 0.5~0.6 200 1.3~14 0.9~10 0.6~7 0.5~5 0.5~3.5 0.5~2.5 0.5~1.7 0.5~1.3 0.5~0.9 400 1.8~20 1.3~14 0.9~10 0.6~7 0.5~5 0.5~3.5 0.5~2.5 0.5~1.7 0.5~1.3 800 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.5~5 0.5~3.5 0.5~2.5 0.5~1.7 1600 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.5~5 0.5~3.5 0.5~2.5 3200 5.1~56 3.6~40 2.5~28 1.8~20 1.3~14 0.9~10 0.6~7 0.5~5 0.5~3.5 (m) 3 4 ISO F no. MEMO R2109_15L_cover.indd 2 R2109_15L_cover.indd 2 2009/04/09 15:43:10 2009/04/09 15:43:10
Page: 3
5 Information for Your Safety IMPORTANT SAFETY INSTRUCTIONS When using your photographic equipment, basic safety precautions should always be followed, including the following: Read and understand all instructions before using. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. Care must be taken as burns can occur from touching hot parts. y y y book_R2109_15L.indb 5 book_R2109_15L.indb 5 2009/04/09 16:19:40 2009/04/09 16:19:40
Page: 4
6 Do not operate if the appliance has been dropped or damaged - until it has been examined by qualified service personnel. Let appliance cool completely before putting away. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids. To reduce the risk of electric shock, do not disassemble this appliance, but take it to qualified service personnel when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is used subsequently. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. SAVE THESE INSTRUCTIONS y y y y y book_R2109_15L.indb 6 book_R2109_15L.indb 6 2009/04/09 16:19:41 2009/04/09 16:19:41
Page: 5
EN 7 Names of parts Names of parts (Fig. (Fig. p. 3) p. 3) 1 Light-emitting area 2 Auto light receptor 3 Lock ring 4 Lock pin 5 TEST button/CHARGE lamp 6 AUTO CHECK lamp 7 MODE button 8 ON/OFF button 9 Flash control mode lamp (TTL-AUTO, AUTO, MANUAL) Preparing a battery Preparing a battery (sold separately) (sold separately) Use batteries with a choice of followings. AAA (R03) alkaline batteries (× 2) AAA (R03) NiMH batteries (× 2) x Notes AAA (R03) manganese batteries cannot be used. Continuous firing Continuous firing The flash may become hot when fired many times in succession, resulting in damage or malfunction. The flash should be fired no more than 10 times in succession at intervals of at 6 seconds, after which it should be left unused for at least 10 minutes. • • Thank you for purchasing this Olympus product. To ensure your safety, please read this instruction manual before use, and keep it handy for future reference. book_R2109_15L.indb 7 book_R2109_15L.indb 7 2009/04/09 16:19:41 2009/04/09 16:19:41
Page: 6
8 EN 1 Open the battery compartment cover. Battery compartment cover 2 Insert the batteries with correct +/– polarity. 3 Close the battery compartment cover. Loading batteries Loading batteries book_R2109_15L.indb 8 book_R2109_15L.indb 8 2009/04/09 16:19:42 2009/04/09 16:19:42
Page: 7
EN 9 Attaching to the camera Attaching to the camera x Notes Confirm that both the camera and electronic flash are off. Attaching or removing the electronic flash while either the flash or the camera is on may result in malfunction. 1 Remove the camera hot shoe cover and retract the lock pin by rotating the lock ring as shown (1). Rotate the lock ring in the direction opposite to that shown by the “LOCK” arrow until it stops. 2 Slide the flash securely into the hot shoe until it clicks into place (2). 3 Turn the lock ring securely in the direction of “LOCK” (3). • If the camera has an external flash connector, a flash bracket and bracket cable (sold separately) can be hooked up. book_R2109_15L.indb 9 book_R2109_15L.indb 9 2009/04/09 16:19:42 2009/04/09 16:19:42
Page: 8
10 EN Turning on the electronic flash Turning on the electronic flash Attach an electronic flash to the camera, and then turn the camera on with the flash. TEST button/ CHARGE lamp ON/OFF button 1 Press and hold the ON/OFF button until any lamp lights. Press the ON/OFF button again to turn the power off. 2 When the CHARGE lamp lights, press the TEST button to fire a test flash. Replace the batteries if the CHARGE lamp does not light after: • 30 seconds (Alkaline batteries) • 10 seconds (NiMH batteries) • • If the CHARGE lamp and AUTO CHECK lamp blink simultaneously, batteries are running low. Replace the batteries. If no operations are performed for about 15 minutes, the flash will enter sleep mode to save power. The flash will also enter sleep mode whenever the camera enters sleep mode. If no operations are performed for approximately 15 minutes more, the flash will turn off automatically. Press the ON/OFF button to turn it on. • • book_R2109_15L.indb 10 book_R2109_15L.indb 10 2009/04/09 16:19:43 2009/04/09 16:19:43
Page: 9
EN 11 Shooting (TTL-AUTO) Shooting (TTL-AUTO) In TTL-AUTO mode, the flash intensity is controlled automatically according to the camera settings (ISO sensitivity and aperture value). Use this mode if the camera is equipped with communication capability. MODE button 1 Press the MODE button of the electronic flash repeatedly to set the flash control mode to [TTL AUTO]. 2 By using the “Available shooting range” (Table p. 4) as a guide, determine the distance to the subject and then shoot. When flash activation has been performed correctly, the AUTO CHECK lamp blinks for about 5 seconds after the shooting. • x Notes Some flash control modes are not available depending on camera settings or currently selected shooting modes. It is not possible to select unavailable modes. book_R2109_15L.indb 11 book_R2109_15L.indb 11 2009/04/09 16:19:43 2009/04/09 16:19:43
Page: 10
12 EN Shooting (AUTO) Shooting (AUTO) In AUTO mode, the auto light receptor adjusts adequate lighting for subject, and light is emitted according to the camera settings (ISO sensitivity and aperture value). No pre-flash is used, and release time lag is reduced. 1 Press the MODE button of the electronic flash repeatedly to set the flash control mode to [AUTO]. 2 Use “Available shooting range” (Table p. 4) as a guide to fix the distance to the subject and then shoot. When flash activation has been performed correctly, the AUTO CHECK lamp blinks for about 5 seconds after the shooting. Flash can be tested before shooting; press the TEST button to test flash activation. When the AUTO CHECK lamp blinks for about 5 seconds, the flash is adjusted correctly. For cameras without communication capability For cameras without communication capability Set the ISO sensitivity and aperture value by referring to the section of the “Available shooting range” (Table p. 4), and shoot within that range. • • book_R2109_15L.indb 12 book_R2109_15L.indb 12 2009/04/09 16:19:44 2009/04/09 16:19:44
Page: 11
EN 13 Shooting (MANUAL) Shooting (MANUAL) 1 Press the MODE button of the electronic flash repeatedly to set the flash control mode to [MANUAL]. 2 For the optimum shooting distance to subject, adjust camera settings (ISO sensitivity and aperture value) and then shoot. The flash always fires at maximum intensity. Optimum shooting distance Optimum shooting distance Use the following formula to calculate the optimum shooting distance. Optimum shooting distance (m) = 14 × ISO sensitivity coefficient (1 for ISO 100) ÷ Aperture value (F) ISO sensitivity and their coefficients ISO sensitivity 25 50 100 200 400 800 1600 3200 Coefficient 0.5 0.71 1.0 1.4 2.0 2.8 4.0 5.6 • book_R2109_15L.indb 13 book_R2109_15L.indb 13 2009/04/09 16:19:44 2009/04/09 16:19:44
Page: 12
14 EN Safety precautions Safety precautions Read WARNINGS and CAUTIONS thoroughly to ensure safe usage. These safety precautions protect the users and others and prevent from damaging your property. WARNING Failure to observe the precautions indicated by this symbol may result in injury or death. Do not use it in places where it may be exposed to flammable or explosive gas. Otherwise, fire ignition or explosion may result. Do not directly solder the product or modify, remodel, or disassemble. Do not cover the light emitting area of the flash with your hand, and do not touch the light emitting area after continuous firing. It may burn your skin. Water and foreign matter inside of the device may cause fire or electric shock. If the device is immersed in or exposed to water or foreign matter is found inside of the device, turn off the power immediately and remove batteries with care. Contact your dealer or consult Olympus Authorized Service Station. To prevent a traffic accident, do not direct the flash at a person operating a motor vehicle. Do not use a flash close to the subject eyes; particular care should be observed when photographing infants. Do not leave the flash within the reach of children. The flash light may cause vision disability. Do not use batteries that are not specified for use. Do not mix old and new batteries, or batteries made by different manufacturers. Do not connect substances such as metal to the (+) or (–) of batteries. • • • • • • • • • book_R2109_15L.indb 14 book_R2109_15L.indb 14 2009/04/09 16:19:44 2009/04/09 16:19:44
Page: 13
EN 15 CAUTION Failure to observe the precautions indicated by this symbol may result in injury or property damage. If you notice any abnormalities such as odor, noise, or smoke, stop using this device. Otherwise a fire or burn may result. Remove the batteries carefully to avoid burning yourself, and contact your dealer or consult Olympus Authorized Service Station. Do not operate with wet hands. This may cause a malfunction and electric shock. • • European technical Customer Support European technical Customer Support Please visit our homepage http://www.olympus-europa.com or call: Tel. 00800 - 67 10 83 00 (Toll-free) +49 180 5 - 67 10 83 or +49 40 - 237 73 4899 (Charged) For customers in Europe For customers in Europe The “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. CE-mark products are for sale in Europe. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. book_R2109_15L.indb 15 book_R2109_15L.indb 15 2009/04/09 16:19:45 2009/04/09 16:19:45
Page: 14
16 EN Specifications Specifications MODEL NO. : FS-FL14 Product type : External electronic flash for digital still camera Guide number : 14 (ISO 100), 20 (ISO 200) Firing angle : Up/down 55°, Left/right 70° (Covering the field angle of 14mm lens (equivalent to 28mm on a 35mm)) Flash modes : TTL-AUTO, AUTO, MANUAL Flash emission period : Approx. 1/20000 to 1/500 seconds Flash emission count (at full activation)* : Approx. 80 times (using AAA (R03) alkaline batteries) Approx. 130 times (using AAA (R03) NiMH batteries) Recharge time (from full activation to CHARGE lamp lighting)* : Approx. 5.5 seconds (using AAA (R03) alkaline batteries) Approx. 4.5 seconds (using AAA (R03) NiMH batteries) Operating environment : Temperature: –10 to 42°C (14 to 108°F) Humidity: 20 to 90% Dimensions : 70.0 (W) × 42.5 (H) × 57.0 (D) mm (2.8 × 1.7 × 2.2 in.) (excluding protrusions) Weight : 84 g (3.0 oz.) (excluding batteries) * Measurements obtained from in-house tests at Olympus. Actual figures may vary depending on shooting conditions. Specifications are subject to change without any notice or obligation on the part of the manufacturer. book_R2109_15L.indb 16 book_R2109_15L.indb 16 2009/04/09 16:19:45 2009/04/09 16:19:45
Page: 15
157 Olympus UK Ltd KeyMed House, Stock Road, Southend-on-Sea, Essex SS2 5QH Tel.:+44 (0) 1702 616333 +44 (0) 1702 465677 www.olympus.co.uk BULGARIA REP. OFFICE OLYMPUS C&S blvd. Bulgaria 88, entr. 2, fl.1, ap. 3, 1680 Sofia, Bulgaria Tel./Fax: +359 2 854 84 14, www.olympus.bg OLYMPUS C&S, SPOL. S.R.O. Evropská 176, 160 41 Praha 6, Tel.: +420 800 167777 OLYMPUS IMAGING EUROPA GMBH Wendenstr. 14-18, D-20097 Hamburg, Tel.: (040) 237730 Versandadresse Reparaturen: Olympus Deutschland GmbH Bredowstrasse 20, 22113 Hamburg, Tel.: (040) 23773 4121 OLYMPUS DANMARK A/S Tempovej 48–50, 2750 Ballerup, Tlf.: +45 44 73 47 00 OLYMPUS ESTONIA OÜ Järvevana tee 9, 11314 Tallinn, www.olympus.ee Tel.: +372 65 49 541, Hoolduse tel.: +372 65 49 531 OLYMPUS ESPAÑA S.A.U. Domenico Scarlatti, 11, 28003 Madrid Tel.: +34 902 444 104, Fax: +34 191 343 1917 e-mail: st-consumo@olympus.es OLYMPUS FINLAND OY Äyritie 12 B, 01510 VANTAA, Puh. (09) 875 810 OLYMPUS FRANCE CENTRE TECHNIQUE Parc d’Affaires Silic, 55, rue de Monthléry, 94533 Rungis Cedex, Service clients tél.: 0810 223 223 E-Mail: image-son.sav@olympus.fr FOTOMATIC A.E. Aποκλειστική Διανομή Eλλάδας KOYPTIΔOY 121 – 111 43 AΘHNA, THΛ.: (210) 21.11.860 – FAX: (210) 21.11.850 M. ΠHΓA 30 – 731 31 XANIA, THΛ.: (28210) 91.081 – FAX: (28210) 74.601 www.olympus.com.gr – info@fotomatic.gr OLYMPUS D.O.O. ZA TRGOVINU Avenija Većeslava Holjevca 40, HR-10020 Zagreb, Tel.: +385 1 4899 000, Fax: +385 1 4899 029 OLYMPUS HUNGARY KFT. 1382 Budapest 62, Pf. 838, Tel.: +36 1 250 9377 POLYPHOTO S.P.A. Via C. Pavese 11/13, 20090 Opera/Milano, Tel.: (02) – 530021 OLYMPUS LITHUANIA UAB Seskines 55A, Vilnius, LT-07159 Lithuania, Tel.: +370 5 233 00 21 OLYMPUS LATVIA SIA Vienības gatve 87 b, LV-1004 Rīga, Tālr.: +371 67623334 OLYMPUS NEDERLAND B.V. Industrieweg 44, 2382 NW Zoeterwoude Tel.: 0031 (0)71-5821888, www.olympus.nl book_R2109_15L.indb 157 book_R2109_15L.indb 157 2009/04/09 16:20:45 2009/04/09 16:20:45

Question & answers

Have a question about the Olympus FL-14 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus FL-14. Please make sure that you describe your difficulty with the Olympus FL-14 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus FL-14

Name
Email
Reaction

View a manual of the Olympus FL-14 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Flash units
  • Model/name: FL-14
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Danish, Polish, Russian, Finnish, Slovak, Hungarian, Slovene