FE-45

Olympus FE-45 manual

FE-45

User manual for the Olympus FE-45 in English. This PDF manual has 62 pages.

Page: 1
Printed in China VN097101 book̲d4398̲4387̲en̲UA.indb 62 2008/11/18 10:24:24 DIGITAL CAMERA FE-45/X-40 FE-35/X-30 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specied, the explanation about these illustrations is provided for FE-45/X-40. Instruction Manual book̲d4398̲4387̲en̲UA.indb 1 2008/11/18 10:23:45 Preparing the Camera “Preparing the Camera” (p. 10) Names of Parts ................................. 6 Preparing the Camera .................... 10 Shooting, Playback, and Erasing... 14 Using Shooting Modes................... 17 Using Shooting Functions............. 19 Using Playback Features............... 23 Menus for Shooting Functions...... 24 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions.......................... 28 Menus for Other Camera Settings.. 30 Printing............................................ 34 Using OLYMPUS Master 2.............. 39 Usage Tips ...................................... 41 Appendix ......................................... 45 Index ................................................ 58 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Contents Contents Step 2 Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p. 14) Step 3 How to Use the Camera “Three Types of Setting Operations” (p. 3) Step 4 Printing “Direct printing (PictBridge)” (p. 34) “Print Reservations (DPOF)” (p. 37) Step 5 2 EN Checking the contents of the box Step 1 Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Digital camera Strap Two AA batteries USB cable OLYMPUS Master 2 CD-ROM microSD Attachment AV cable (FE-45/X-40) Video cable (FE-35/X-30) or book̲d4398̲4387̲en̲UA.indb 2 2008/11/18 10:23:46 d4398̲4387̲e̲UA.indd 1 d4398̲4387̲e̲UA.indd 1 2008/11/18 14:21:06 2008/11/18 14:21:06
Page: 2
Printed in China VN097101 book̲d4398̲4387̲en̲UA.indb 62 2008/11/18 10:24:24 DIGITAL CAMERA FE-45/X-40 FE-35/X-30 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specied, the explanation about these illustrations is provided for FE-45/X-40. Instruction Manual book̲d4398̲4387̲en̲UA.indb 1 2008/11/18 10:23:45 Preparing the Camera “Preparing the Camera” (p. 10) Names of Parts ................................. 6 Preparing the Camera .................... 10 Shooting, Playback, and Erasing... 14 Using Shooting Modes................... 17 Using Shooting Functions............. 19 Using Playback Features............... 23 Menus for Shooting Functions...... 24 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions.......................... 28 Menus for Other Camera Settings.. 30 Printing............................................ 34 Using OLYMPUS Master 2.............. 39 Usage Tips ...................................... 41 Appendix ......................................... 45 Index ................................................ 58 ¾ ¾ ¾ ¾ ¾ ¾ ¾ Contents Contents Step 2 Shooting and Playing Back Images “Shooting, Playback, and Erasing” (p. 14) Step 3 How to Use the Camera “Three Types of Setting Operations” (p. 3) Step 4 Printing “Direct printing (PictBridge)” (p. 34) “Print Reservations (DPOF)” (p. 37) Step 5 2 EN Checking the contents of the box Step 1 Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Digital camera Strap Two AA batteries USB cable OLYMPUS Master 2 CD-ROM microSD Attachment AV cable (FE-45/X-40) Video cable (FE-35/X-30) or book̲d4398̲4387̲en̲UA.indb 2 2008/11/18 10:23:46 d4398̲4387̲e̲UA.indd 1 d4398̲4387̲e̲UA.indd 1 2008/11/18 14:21:06 2008/11/18 14:21:06
Page: 3
61 EN MEMO book̲d4398̲4387̲en̲UA.indb 61 2008/11/18 10:24:24 4 EN Using the FUNC Menu (p. 22) Using the FUNC Menu (p. 22) Frequently used shooting menu functions can be set with less steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 14) K button (shooting/switching shooting modes) (p. 17, 18) q button (playback) (p. 15) Zoom buttons (p. 19) F button (exposure compensation) (p. 20) & button (macro) (p. 20) # button (ash) (p. 19) Y button (self-timer) (p. 21) g/E button (changing information display/ menu guide) (p. 22, 23/p. 17) "/ button (backlight boost/erase) (p. 21/p. 16, 29) B button (p. 22) Arrow pad Buttons in use B button book̲d4398̲4387̲en̲UA.indb 4 2008/11/18 10:23:49 1 Press the  button. This example describes how to use the menus to set the [POWER SAVE]. CAMERA MENU MENU EXIT SET OK Shooting mode top menu 2 Use klmn to select the desired menu, and press the B button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. BACKUP NO 1 2 3 SETUP SET OK ENGLISH PIXEL MAPPING MEMORY FORMAT MENU EXIT Submenu 1 ● Please read “Menu Settings” (p. 24 to 33) while referring to this page. 3 Use kl to select the desired Submenu 1, and press the B button. 1 2 3 SETUP MENU EXIT SET OK POWER SAVE OFF NTSC VIDEO OUT 1 2 3 SETUP MENU SET OK BACK POWER SAVE OFF NTSC VIDEO OUT POWER SAVE OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press m to highlight the page tab, and then use kl to move the page. Press n to return to the submenu. Some menus include submenus that appear by pressing the B button. 4 Use kl to select Submenu 2, and press the B button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 24 to 33) 1 2 3 SETUP MENU EXIT SET OK POWER SAVE ON NTSC VIDEO OUT 5 Press the  button to complete the setting. ● Three Types of Setting Operations Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. There may be menus that are unavailable depending on other related settings or the  mode (p. 17).  button Arrow pad B button Buttons in use E button 3 EN book̲d4398̲4387̲en̲UA.indb 3 2008/11/18 10:23:47 d4398̲4387̲e̲UA.indd 2 d4398̲4387̲e̲UA.indd 2 2008/11/18 14:21:09 2008/11/18 14:21:09
Page: 4
61 EN MEMO book̲d4398̲4387̲en̲UA.indb 61 2008/11/18 10:24:24 4 EN Using the FUNC Menu (p. 22) Using the FUNC Menu (p. 22) Frequently used shooting menu functions can be set with less steps using the FUNC menu. Using the Direct Buttons Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 14) K button (shooting/switching shooting modes) (p. 17, 18) q button (playback) (p. 15) Zoom buttons (p. 19) F button (exposure compensation) (p. 20) & button (macro) (p. 20) # button (ash) (p. 19) Y button (self-timer) (p. 21) g/E button (changing information display/ menu guide) (p. 22, 23/p. 17) "/ button (backlight boost/erase) (p. 21/p. 16, 29) B button (p. 22) Arrow pad Buttons in use B button book̲d4398̲4387̲en̲UA.indb 4 2008/11/18 10:23:49 1 Press the  button. This example describes how to use the menus to set the [POWER SAVE]. CAMERA MENU MENU EXIT SET OK Shooting mode top menu 2 Use klmn to select the desired menu, and press the B button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. BACKUP NO 1 2 3 SETUP SET OK ENGLISH PIXEL MAPPING MEMORY FORMAT MENU EXIT Submenu 1 ● Please read “Menu Settings” (p. 24 to 33) while referring to this page. 3 Use kl to select the desired Submenu 1, and press the B button. 1 2 3 SETUP MENU EXIT SET OK POWER SAVE OFF NTSC VIDEO OUT 1 2 3 SETUP MENU SET OK BACK POWER SAVE OFF NTSC VIDEO OUT POWER SAVE OFF ON Page tab Submenu 2 To quickly move to the desired submenu, press m to highlight the page tab, and then use kl to move the page. Press n to return to the submenu. Some menus include submenus that appear by pressing the B button. 4 Use kl to select Submenu 2, and press the B button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 24 to 33) 1 2 3 SETUP MENU EXIT SET OK POWER SAVE ON NTSC VIDEO OUT 5 Press the  button to complete the setting. ● Three Types of Setting Operations Using the Menu Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. There may be menus that are unavailable depending on other related settings or the  mode (p. 17).  button Arrow pad B button Buttons in use E button 3 EN book̲d4398̲4387̲en̲UA.indb 3 2008/11/18 10:23:47 d4398̲4387̲e̲UA.indd 2 d4398̲4387̲e̲UA.indd 2 2008/11/18 14:21:09 2008/11/18 14:21:09
Page: 5
5 EN 1 G SLIDESHOW.............. p. 28 2 I EDIT Q (Resize) ............... p. 28 P (Crop) ................... p. 28 3 J PLAYBACK MENU 0 (Protect) .............. p. 28 Menus for Playback, Editing, and Printing Functions In playback mode, settings can be adjusted. MENU EXIT SET OK PLAYBACK MENU 1 2 3 4 5 6 7 Playback mode top menu y (Rotate).................. p. 28 R *1 (Add sound to still images) ................... p. 29 4 K ERASE ....................... p. 29 5 L PRINT ORDER........... p. 37 6 E SETUP* * Same as “Menus for Shooting Functions” 7 F SILENT MODE ........... p. 33 1 A IMAGE QUALITY........ p. 24 2 B CAMERA MENU WB.............................. p. 25 ISO ............................. p. 25 R (Still images*1 /movies*1 ) ................................ p. 25 PANORAMA ............... p. 26 FACE DETECT........... p. 26 3 C SWITCH SHOOTING MODES P ................................ p. 14 G............................ p. 17 DIS MODE.................. p. 18 s........................... p. 17 MOVIE........................ p. 18 4 D RESET........................ p. 27 5 E SETUP MEMORY FORMAT/ FORMAT ................. p. 30 BACKUP..................... p. 30 W (Language)....... p. 30 PIXEL MAPPING........ p. 30 K/q ........................ p. 31 SAVE SETTINGS ....... p. 31 MENU COLOR ........... p. 31 BEEP.......................... p. 31 s (Monitor) .............. p. 31 X (Date/time)........... p. 31 VIDEO OUT................ p. 32 POWER SAVE............ p. 33 6 F SILENT MODE ........... p. 33 Menu Index Menus for Shooting Functions In shooting mode, settings can be adjusted. MENU EXIT SET OK CAMERA MENU 4 1 2 3 5 6 Shooting mode top menu *1 Available in the FE-45/X-40 only. *1 Available in the FE-45/X-40 only. book̲d4398̲4387̲en̲UA.indb 5 book̲d4398̲4387̲en̲UA.indb 5 2008/11/18 10:23:49 2008/11/18 10:23:49
Page: 6
6 EN Names of Parts 1 Strap eyelet.................................p. 10 2 Battery/card compartment cover.....................p. 10 3 Microphone*1 .........................p. 25, 29 4 Lens......................................p. 45, 57 *1 Available in the FE-45/X-40 only. Camera unit 7 8 1 3 4 5 6 2 5 Flash...........................................p. 19 6 Self-timer lamp............................p. 21 7 Multi-connector ...............p. 32, 34, 39 8 Tripod socket book̲d4398̲4387̲en̲UA.indb 6 book̲d4398̲4387̲en̲UA.indb 6 2008/11/18 10:23:50 2008/11/18 10:23:50
Page: 7
7 EN 3 1 4 5 8 7 11 12 10 9 2 6 1 n button ............................p. 12 2 g/E button (changing information display/menu guide).....p. 22, 23/p. 17 3 Monitor..................................p. 14, 41 4 m button.................................p. 3 5 /D button (backlight boost/erase) ................................p. 21/p. 16, 29 6 Shutter button .............................p. 14 7 Card access lamp.......................p. 46 8 Zoom buttons..............................p. 19 9 K button (shooting/ switching shooting modes) ...p. 17, 18 10 q button (playback)..................p. 15 11 B button (OK/FUNC)..............p. 3, 22 12 Arrow pad ...............................p. 3, 12 F button (exposure compensation) ..........................................p. 20 & button (macro)...................p. 20 Y button (self-timer) ..............p. 21 # button (flash)......................p. 19 book̲d4398̲4387̲en̲UA.indb 7 book̲d4398̲4387̲en̲UA.indb 7 2008/11/18 10:23:51 2008/11/18 10:23:51
Page: 8
8 EN Monitor Shooting mode display +2.0 1/30 F3.1 P 4 IN ISO 400 NORM 1 6 8 7 10 12 13 14 9 11 18 17 16 15 2 4 5 3 +2.0 IN 00:34 QVGA 15 1 8 7 10 9 11 14 18 16 15 2 4 5 3 10M 10M Still image Movie 1 Shooting mode............................p. 14 2 Flash mode.................................p. 19 3 Silent mode.................................p. 33 4 Macro/super macro.....................p. 20 5 Battery check..............................p. 10 6 Flash standby/camera shake warning/flash charge.............p. 19, 41 7 AF target mark............................p. 14 8 Recording with sound*1 ...............p. 25 9 Number of storable still pictures/ remaining recording time ...p. 14/p. 18 *1 Available in the FE-45/X-40 only. 10 Current memory..........................p. 46 11 Self-timer ....................................p. 21 12 Aperture value ............................p. 14 13 Shutter speed .............................p. 14 14 Exposure compensation .............p. 20 15 Compression/frame rate .............p. 24 16 Image size ..................................p. 24 17 ISO..............................................p. 25 18 White balance.............................p. 25 book̲d4398̲4387̲en̲UA.indb 8 book̲d4398̲4387̲en̲UA.indb 8 2008/11/18 10:23:51 2008/11/18 10:23:51
Page: 9
9 EN Playback mode display 10M 2009.08.26 2009.08.26 12:30 4 +2.0 F3.1 10 IN x 100-0004 NORM 1/1000 ISO 400 2 9 10 8 6 7 11 3 4 5 1 15 16 12 13 14 2009.08.26 2009.08.26 12:30 100-0004 00:14 /00:34 IN QVGA 15 10 15 8 9 11 3 4 5 1 12 13 Still image Movie 1 Silent mode.................................p. 33 2 Print reservations/ number of prints.................p. 37/p. 36 3 Adding sound*1 ............................p. 29 4 Protect ........................................p. 28 5 Battery check..............................p. 10 6 Aperture value ............................p. 14 7 Exposure compensation .............p. 20 8 White balance.............................p. 25 9 Image size ..................................p. 24 *1 Available in the FE-45/X-40 only. 10 File number....................................... - 11 Frame number/ Elapsed time/total recording time ..............................................p. 15, 16 12 Current memory..........................p. 46 13 Compression/frame rate .............p. 24 14 ISO..............................................p. 25 15 Date and time .............................p. 12 16 Shutter speed .............................p. 14 book̲d4398̲4387̲en̲UA.indb 9 book̲d4398̲4387̲en̲UA.indb 9 2008/11/18 10:23:51 2008/11/18 10:23:51
Page: 10
10 EN Preparing the Camera 2 For the types of batteries that can be used, see “Battery handling precautions” (p. 45). If using rechargeable batteries, charge the batteries. Turn off the camera before opening the battery/card compartment cover. When to replace the batteries Replace the batteries when the error message shown below appears. BATTERY EMPTY Monitor top right Error message Flashes in red Attaching the camera strap Pull the strap tight so that it does not come loose. Loading the batteries and the xD-Picture Card™ (sold separately) into the camera Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. 1 3 2 1 Battery/card compartment cover book̲d4398̲4387̲en̲UA.indb 10 book̲d4398̲4387̲en̲UA.indb 10 2008/11/18 10:23:52 2008/11/18 10:23:52
Page: 11
11 EN Using the microSD card/ microSDHC card (sold separately) A microSD card or microSDHC card (hereafter both will be referred to as microSD card) is also compatible with this camera using the microSD Attachment. “Using the microSD Attachment” (p. 48) 1 Insert the microSD card into the microSD Attachment. Insert the card entirely into the attachment. 2 Insert the microSD Attachment into the camera. Notch Contact area To remove the microSD card Pull the microSD card straight out. Do not touch the contact area of the microSD Attachment and/or microSD card. 3 Notch Contact area Insert the card straight until it clicks into place. Do not touch the contact area directly. 4 1 2 This camera allows the user to take pictures using the internal memory even when no xD-Picture Card (sold separately) is inserted. “Using an xD-Picture Card” (p. 46) “Number of storable pictures (still pictures)/ Continuous recording length (movies) in the internal memory and xD-Picture Card” (p. 47) To remove the xD-Picture Card 1 2 Press the card in until it clicks and comes out slightly, then grab the card and pull it out. book̲d4398̲4387̲en̲UA.indb 11 book̲d4398̲4387̲en̲UA.indb 11 2008/11/18 10:23:52 2008/11/18 10:23:52
Page: 12
12 EN Arrow pad and operation guide The symbols 1243, displayed on various setting and movie playback screens indicate that the arrow pad be used. 2009.08.26 12:30 100-0004 00:14 /00:34 IN / 2008 08 26 12 30 OK X Y M D TIME MENU CANCEL SET Y M D 0.0 +0.3 +0.7 +1.0 EXPOSURE COMP. Arrow pad 4 2 1 3 Operation guides displayed at the bottom of the screen indicate that the m button, B button, zoom buttons, or D button be used. 1 4 2 5 3 6 IN OK MENU BACK GO SEL. IMAGE T W SET OK D MENU EXIT SET OK CAMERA MENU Operation guide Setting the date and time The date and time set here are saved to image file names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. X Y M Y M D D TIME ---- -- -- -- -- MENU CANCEL Date and time setting screen 2 Use kl to select the year for [Y]. 2009 -- -- -- -- X Y M Y M D D TIME MENU CANCEL 3 Press n to save the setting for [Y]. 2009 08 -- -- -- X Y M Y M D D TIME MENU CANCEL 4 As in Steps 2 and 3, use klmn and the B button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order). For a more accurate setting, press the B button when the time signal hits 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 31) ● book̲d4398̲4387̲en̲UA.indb 12 book̲d4398̲4387̲en̲UA.indb 12 2008/11/18 10:23:53 2008/11/18 10:23:53
Page: 13
13 EN Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Press the m button, and press klmn to select [E] (SETUP). MENU EXIT SET OK SETUP 2 Press the B button. 1 2 3 BACKUP NO SETUP ENGLISH PIXEL MAPPING MEMORY FORMAT MENU EXIT SET OK 3 Use kl to select [W] and press the B button. ENGLISH FRANCAIS DEUTSCH ESPAÑOL ITALIANO MENU BACK SET OK 4 Use klmn to select your language and press the B button. 5 Press the m button. book̲d4398̲4387̲en̲UA.indb 13 book̲d4398̲4387̲en̲UA.indb 13 2008/11/18 10:23:56 2008/11/18 10:23:56
Page: 14
14 EN Shooting, Playback, and Erasing 2 Hold the camera and compose the shot. 1/400 F3.5 AUTO Horizontal grip Vertical grip Monitor 3 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. 1/400 F3.1 P AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 43) ● ● Shooting with the optimum aperture value and shutter speed (P mode) In this mode, automatic shooting settings are activated while also allowing changes to a wide range of shooting menu functions such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. 10M 4 IN NORM P Monitor (standby mode screen) Number of storable still pictures (p. 47) P mode indicator If P mode is not displayed, press the K button several times to select it. Current shooting mode display Press the n button again to turn off the camera. book̲d4398̲4387̲en̲UA.indb 14 book̲d4398̲4387̲en̲UA.indb 14 2008/11/18 10:23:57 2008/11/18 10:23:57
Page: 15
15 EN 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. 1/400 F3.1 P Image review screen Press fully To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the K button or press the shutter button halfway down. To shoot movies “Shooting movies (A mode)” (p. 18) Viewing images 1 Press the q button. 1 IN 10M 2009.08.26 12:30 100-0001 NORM Playback image Number of frames 2 Use klmn to select an image. Displays 10 frames before the current image Displays next image Displays previous image Displays 10 frames after the current image The display size of the images can be changed. “Index view and close-up view” (p. 23) To play back movies Select a movie, and press the B button. 2009.08.26 12:30 100-0004 4 IN MOVIE PLAY OK Movie The sound when recording movie can not be played back with this camera.*1 To listen to the sound, connect to a TV or PC. *1 [R] is available only with FE-45/X-40. book̲d4398̲4387̲en̲UA.indb 15 book̲d4398̲4387̲en̲UA.indb 15 2008/11/18 10:23:58 2008/11/18 10:23:58
Page: 16
16 EN Operations during movie playback Fast-forward: Press and hold down n. Rewind: Press and hold down m. Pause: Press the B button. 2009.08.26 12:30 100-0004 00:12 /00:34 IN During playback Elapsed time/ Total recording time First (last) frame/frame advance: During pause, press k to display the first frame, and press l to display the last frame. Press and hold down n to play a movie, and press and hold down m to play a movie in reverse. Press the B button to resume playback. 2009.08.26 12:30 100-0004 00:14 /00:34 IN / During pause To stop movie playback Press the m button. Erasing images during playback (Single image erase) 1 Press the D button when the image to be erased is displayed. ERASE ERASE OK IN NO NO YES SET CANCEL MENU 2 Press k to select [YES], and press the B button. [K ERASE] (p. 29) book̲d4398̲4387̲en̲UA.indb 16 book̲d4398̲4387̲en̲UA.indb 16 2008/11/18 10:23:59 2008/11/18 10:23:59
Page: 17
17 EN Submenu 1 Application BPORTRAIT/FLANDSCAPE/ GNIGHT SCENE/ MNIGHT+PORTRAIT/ CSPORT/NINDOOR/ WCANDLE*1 / RSELF PORTRAIT/ SSUNSET*1 /XFIREWORKS*1 / VCUISINE/dDOCUMENTS The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. Shooting with automatic settings (G mode) According to the scene, the camera automatically selects the ideal shooting mode from [PORTRAIT]/[LANDSCAPE]/ [NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This is a fully automatic mode that allows the user to take pictures using the best mode for the shooting scene simply by pressing the shutter button. The shooting menu options cannot be specified in G mode. 1 Press the K button a few times to set G. The icon changes depending on the scene that the camera automatically selects. 10M 4 IN NORM iAUTO Press the shutter button halfway down or press the g button to check which shooting mode the camera has automatically selected. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, P mode will be selected. ● The shooting mode changes in the order of P, G, h, s, A each time the K button is pressed. By switching to any of other shooting modes, most settings in h and s mode will be changed to the default setting of the respective shooting mode. Using the best mode for the shooting scene (s mode) 1 Press the K button a few times to set s. PORTRAIT SET OK MENU EXIT An explanation of the selected mode is displayed while the E button is pressed and held. 2 Use kl to select the best shooting mode for the scene, and press the B button. 10M 4 IN NORM Icon indicating the scene mode that is set In s modes, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, settings may not be changed in some modes. ● Using Shooting Modes book̲d4398̲4387̲en̲UA.indb 17 book̲d4398̲4387̲en̲UA.indb 17 2008/11/18 10:24:00 2008/11/18 10:24:00
Page: 18
18 EN Using the digital image stabilization mode (h mode) This mode enables the user to reduce blur that is caused by camera shake and subject movement. 1 Press the K button a few times to set h. h mode indicator 4 IN NORM 10M By switching to any of other shooting modes, most function settings in h mode will change to the default settings of the newly selected mode. Shooting movies (n mode) 1 Press the K button a few times to set n. A mode indicator 00:34 00:34 IN QVGA QVGA 15 15 2 Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording. Press halfway Press fully 00:34 00:34 REC REC Lights up red when recording Remaining recording time (p. 47) 3 Gently press the shutter button all the way down to stop recording. FE-45/X-40 allows you to record movie and sound at the same time. While recording, digital zoom is only available. Set [R] (movies) (p. 25) to [OFF] when using optical zoom. FE-35/X-30 allows you to use either optical or digital zoom even during recording movie, but sound cannot be recorded. book̲d4398̲4387̲en̲UA.indb 18 book̲d4398̲4387̲en̲UA.indb 18 2008/11/18 10:24:01 2008/11/18 10:24:01
Page: 19
19 EN Using the flash The flash functions can be selected to best match the shooting conditions. 1 Press the # button. P OK OK AUTO SET SET FLASH AUTO FLASH AUTO AUTO ! # $ 2 Use mn to select the setting option, and press the B button to set. Option Description FLASH AUTO The flash fires automatically in low-light or backlight conditions. REDEYE Pre-flashes are emitted to reduce the occurrence of red eye in your photos. FILL IN The flash fires regardless of the available light. FLASH OFF The flash does not fire. Using the zoom Pressing the zoom buttons adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button 10M P 4 IN NORM 10M P 4 IN NORM Zoom bar Optical zoom: 3x, digital zoom: 4x Use of h mode (p. 18) is recommended when shooting with the telephoto zoom. The zoom bar appearance identifies the status of the digital zoom. Digital zoom range When using optical zoom and digital zoom Optical zoom range Using Shooting Functions book̲d4398̲4387̲en̲UA.indb 19 book̲d4398̲4387̲en̲UA.indb 19 2008/11/18 10:24:01 2008/11/18 10:24:01
Page: 20
20 EN Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (except for G) can be adjusted brighter or darker to obtain a desired shot. 1 Press the F button. 0.0 0.0 +0.3 +0.3 +0.7 +0.7 +1.0 +1.0 EXPOSURE COMP. Exposure compensation value 2 Use klmn to select the desired brightness, and press the B button. Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Press the & button. P OK OK SET SET OFF OFF OFF % & OFF 2 Use mn to select the setting option, and press the B button to set. Option Description OFF Macro mode is deactivated. MACRO This enables shooting as close as 10 cm/3.9 in.*1 (60 cm/23.6 in.*2 ) to the subject. SUPER MACRO*3 This enables shooting as close as 5 cm/2.0 in. to the subject. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 19) and zoom (p. 19) cannot be set during super macro shooting. book̲d4398̲4387̲en̲UA.indb 20 book̲d4398̲4387̲en̲UA.indb 20 2008/11/18 10:24:03 2008/11/18 10:24:03
Page: 21
21 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Press the Y button. OFF P OK OK NORM SET SELFTIMER OFF ON Y 10M 2 Use kl to select the desired setting option, and press the B button to set. Option Description OFF The self-timer is deactivated. ON The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the Y button again. Increasing the brightness of the monitor (Backlight boost) Press  in shooting mode. The monitor becomes brighter. If there is no operation for 10 seconds, the previous brightness resumes. book̲d4398̲4387̲en̲UA.indb 21 book̲d4398̲4387̲en̲UA.indb 21 2008/11/18 10:24:04 2008/11/18 10:24:04
Page: 22
22 EN Using the FUNC menu The FUNC menu provides the following menu functions that can be quickly accessed and set. [WB] (p. 25) • [A IMAGE QUALITY] (p. 24) • [ISO] (p. 25) • 1 Press the B button. WB AUTO AUTO 5 3 1 w x y 10M ISO AUTO WB AUTO NORM P 2 Use kl to select the menu function and mn to select the desired setting option, and then press the B button to set. Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press the g button. The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 8) 10M +2.0 P 4 IN ISO 400 NORM 10M +2.0 P 4 IN ISO 400 NORM Normal No information Grid ● book̲d4398̲4387̲en̲UA.indb 22 book̲d4398̲4387̲en̲UA.indb 22 2008/11/18 10:24:04 2008/11/18 10:24:04
Page: 23
23 EN Index view and close-up view Index view enables quick selection of a desired image. Close-up view (up to 10x magnification) allows checking of image details. 1 Press the zoom buttons. 2009.08.26 4 IN 12:30 2009.08.26 12:30 10 x 4 IN 2009.08.26 12:30 4 IN 2009.08.26 12:30 4 IN 4 IN 10M 2009.08.26 12:30 100-0004 NORM W T W T W T W T W T Index view Single-image view Closeup view To select an image in index view Use klmn to select an image, and press the B button to display the selected image in single-image view. To scroll an image in close-up view Use klmn to move the viewing area. Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press the g button. The displayed image information changes in the order shown below each time the button is pressed. 2009.08.26 12:30 4 100-0004 IN 10M NORM 10M 2009.08.26 12:30 4 100-0004 +2.0 F3.1 1/1000 IN ISO 400 NORM Normal Detailed No information ● Using Playback Features book̲d4398̲4387̲en̲UA.indb 23 book̲d4398̲4387̲en̲UA.indb 23 2008/11/18 10:24:05 2008/11/18 10:24:05
Page: 24
24 EN Menus for Shooting Functions In shooting mode, settings can be adjusted. E indicates the mode in which the function can be set. The default settings of the function are highlighted in . Selecting the appropriate image quality for your application [A IMAGE QUALITY] A IMAGE QUALITY E: P G h s n Still pictures Submenu 1 Submenu 2 Application IMAGE SIZE 10M (3648×2736) Suitable for printing pictures larger than A3 (11×17 in.). 5M (2560×1920) Suitable for printing A4 (8.5×11 in.) pictures. 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing A5 (5×7 in.) pictures. 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures in emails and on websites. 16:9 (1920×1080) Suitable for playing pictures on a wide screen TV. COMPRESSION FINE Shooting at high quality. NORMAL Shooting at normal quality. Movies Submenu 1 Submenu 2 Application IMAGE SIZE VGA (640×480) / QVGA (320×240) Select the image quality based on the image size and frame rate. Higher frame rates provides smoother movie images. FRAME RATE N 30fps*1 / O 15fps*1 *1 frames per second “Number of storable pictures (still pictures)/Continuous recording length (movies) in the internal memory and xD-picture Card” (p. 47) book̲d4398̲4387̲en̲UA.indb 24 book̲d4398̲4387̲en̲UA.indb 24 2008/11/18 10:24:09 2008/11/18 10:24:09
Page: 25
25 EN Select the settings for the functions while referring to “Using the Menu” (p. 3). Adjusting to a natural color scheme [WB] B CAMERA MENU X WB E: P h s n Submenu 2 Application AUTO The camera automatically adjusts the white balance according to the shooting scene. 5 For shooting outdoors under a clear sky 3 For shooting outdoors under a cloudy sky 1 For shooting under tungsten lighting w For shooting under daylight fluorescent lighting (household lighting, etc.) x For shooting under neutral fluorescent lighting (desk lamps, etc.) y For shooting under white fluorescent lighting (offices, etc.) Selecting the ISO sensitivity [ISO] B CAMERA MENU X ISO E: P Abbreviation for the International Organization for Standardization. ISO standards specify the sensitivity for digital cameras and film, thus codes such as “ISO 100” are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. Submenu 2 Application AUTO The camera automatically adjusts the sensitivity according to the shooting scene. 100/200/400/ 800/1600 The value of the ISO sensitivity is fixed. Recording sound when shooting still images [R] (FE-45/X-40) B CAMERA MENU X R E: P h s Submenu 2 Application OFF No sound is recorded. ON The camera automatically starts recording sound for approx. 4 seconds after a picture is taken. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 6) at the source of the sound you want to record. The sound when recorded in still REC can not be played back with this camera. To listen to the sound, connect to a TV or PC. Selecting sound setting for movies [R] (FE-45/X-40) B CAMERA MENU X R E: n Submenu 2 Application OFF No sound is recorded. ON Sound is recorded. When set to [ON], only the digital zoom can be used during movie recording. To record the movie with the optical zoom, set [R] (movies) to [OFF]. The sound when recorded in movie REC cannot be played back with this camera. To listen to the sound, connect to a TV or PC. book̲d4398̲4387̲en̲UA.indb 25 book̲d4398̲4387̲en̲UA.indb 25 2008/11/18 10:24:09 2008/11/18 10:24:09
Page: 26
26 EN Creating panoramic images [PANORAMA] B CAMERA MENU X PANORAMA E: P h s Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master 2 software on the provided CD-ROM. The focus, exposure (p. 20), zoom position (p. 19), and [WB] (p. 25) are locked at the first frame. The flash (p. 19) is fixed to $ (FLASH OFF) mode. 1 Use klmn to select the direction that the frames are combined. 2 Press the shutter button to take the first frame, and then compose the second shot. The part of the previous picture where it will be joined to the next picture does not remain in the frame. You have to remember what the part in the frame looked like and take the next picture so it overlaps. 3 Repeat Step 2 until the number of desired frames is taken, and then press the B button when finished. When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is possible for up to 10 frames. Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images. Selecting the focusing on a face [FACE DETECT] B CAMERA MENU X FACE DETECT E: P h s Submenu 2 Application OFF The camera does not focus on a face. ON*1 This is used for taking pictures of people. (The camera automatically detects a face and a frame is displayed.) *1 For some subjects, the frame may not appear or may take some time to appear. ● book̲d4398̲4387̲en̲UA.indb 26 book̲d4398̲4387̲en̲UA.indb 26 2008/11/18 10:24:09 2008/11/18 10:24:09
Page: 27
27 EN Select the settings for the functions while referring to “Using the Menu” (p. 3). Switching the shooting modes [C SWITCH SHOOTING MODES] C SWITCH SHOOTING MODES E: P G h s n Submenu 1 Application P Shooting with optimum aperture value and shutter speed (p. 14). G Shooting with automatic settings (p. 17). DIS MODE Using the digital image stabilization mode (p. 18). s Using the best mode for the shooting scene (p. 17). MOVIE Shooting movies (p. 18). Restoring the shooting functions to the default settings [D RESET] D RESET E: P G h s n Submenu 1 Application YES Restores the following menu functions to the default settings. Flash (p. 19) Exposure compensation (p. 20) Macro (p. 20) Self-timer (p. 21) [A IMAGE QUALITY] (p. 24) [s] (p. 17) Shooting information display (p. 22) Menu functions in [B CAMERA MENU] (p. 24 to 27) • • • • • • • • NO The current settings will not be changed. book̲d4398̲4387̲en̲UA.indb 27 book̲d4398̲4387̲en̲UA.indb 27 2008/11/18 10:24:10 2008/11/18 10:24:10
Page: 28
28 EN Menus for Playback, Editing, and Printing Functions Settings can be adjusted during image playback. Playing back pictures automatically [G SLIDESHOW] G SLIDESHOW To start a slideshow After pressing the B button, the slideshow starts. To stop the slideshow, press the B button or the m button. The sound when recorded in slideshow can not be played back with this camera. To listen to the sound, connect to a TV or PC. Changing the image size [Q] I EDIT X Q Submenu 2 Application C 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications. E 320 × 240 Cropping image [P] I EDIT X P 1 Use mn to select an image, and press the B button. 2 Use the zoom buttons to select the size of the cropping frame, and use klmn to move the frame. T W SET OK Cropping frame 3 Press the B button. The edited image will be saved as a separate image. ● Protecting images [0] J PLAYBACK MENU X 0 Protected images cannot be erased by [ERASE] (p. 16), [SEL. IMAGE], or [ALL ERASE] (p. 29), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 30). Submenu 2 Application OFF Images can be erased. ON Images are protected so that they cannot be erased except by formatting of the internal memory/card. 1 Use mn to select an image. 2 Use kl to select [ON]. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the B button. Rotating images [y] J PLAYBACK MENU X y Submenu 2 Application U +90° The image is rotated 90° clockwise. V 0° The image is not rotated. t –90° The image is rotated 90° counter-clockwise. 1 Use mn to select an image. 2 Use kl to select the rotation direction. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the B button. The new picture orientations will be saved even after the power is turned off. book̲d4398̲4387̲en̲UA.indb 28 book̲d4398̲4387̲en̲UA.indb 28 2008/11/18 10:24:10 2008/11/18 10:24:10
Page: 29
29 EN Select the settings for the functions while referring to “Using the Menu” (p. 3). Adding sound to still images [R] (FE-45/X-40) J PLAYBACK MENU X R Submenu 2 Application YES The camera adds (records) sound for approx. 4 seconds while playing back the image. This is useful for recording notes or comments about the image. NO No sound is recorded. 1 Use mn to select an image, and press the B button. 2 Aim the microphone towards the sound source. Microphone 3 Use kl to select [YES], and press the B button. Recording starts. Erasing images [K ERASE] K ERASE Submenu 1 Application SEL. IMAGE Images are individually selected and erased. ALL ERASE All images in the internal memory or card will be erased. When erasing pictures in the internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. ● To individually select and erase images [SEL. IMAGE] 1 Use kl to select [SEL. IMAGE], and press the B button. 2 Use klmn to select the image to be erased, and press the B button to add a R mark to the image. 1 4 2 5 3 6 IN OK MENU BACK GO SEL. IMAGE D R mark 3 Repeat Step 2 to select the images to be erased, and then press the D button to erase the selected images. 4 Use kl to select [YES], and press the B button. The images with a R mark are erased. To erase all images [ALL ERASE] 1 Use kl to select [ALL ERASE], and press the B button. 2 Use kl to select [YES], and press the B button. Saving print settings to the image data [L PRINT ORDER] L PRINT ORDER “Print Reservations (DPOF)” (p. 37) Print reservation can be set only for still images that are recorded to the card. ● book̲d4398̲4387̲en̲UA.indb 29 book̲d4398̲4387̲en̲UA.indb 29 2008/11/18 10:24:11 2008/11/18 10:24:11
Page: 30
30 EN Erasing data completely [MEMORY FORMAT]/[FORMAT] E SETUP X MEMORY FORMAT/FORMAT Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2 Application YES Completely erases the image data in the internal memory*1 or card (including protected images). NO Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [BACKUP] E SETUP X BACKUP Submenu 2 Application YES Backs up image data in the internal memory to the card. NO Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. Changing the display language [W] E SETUP X W “Changing the display language” (p. 13) Submenu 2 Application Languages*1 The language for the menus and error messages displayed on the monitor is selected. *1 The available languages vary depending on the country and/or region where the camera was purchased. Adjusting the CCD and the image processing function [PIXEL MAPPING] E SETUP X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the B button when [START] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. ● Menus for Other Camera Settings book̲d4398̲4387̲en̲UA.indb 30 book̲d4398̲4387̲en̲UA.indb 30 2008/11/18 10:24:12 2008/11/18 10:24:12
Page: 31
31 EN Select the settings for the functions while referring to “Using the Menu” (p. 3). Selecting the menu screen color and background [MENU COLOR] E SETUP X MENU COLOR Submenu 2 Application NORMAL/ COLOR 1/ COLOR 2/ COLOR 3 Selects the menu screen color or background image according to your preference. Setting the operation sound [BEEP] E SETUP X BEEP Submenu 2 Application OFF/ON Turn off or on the operating sound/ warning sound of the camera buttons. Adjusting the brightness of the monitor [s] E SETUP X s Submenu 2 Application BRIGHT/ NORMAL Selects the monitor brightness depending on the surrounding brightness. Setting the date and time [X] E SETUP X X “Setting the date and time” (p. 12) To select the date display order 1 Press n after setting Minute, and use kl to select the date display order. X Y M Y M D D TIME 2009 08 26 12 30 MENU CANCEL Date order Turning on the camera with the K or q button [K/q] E SETUP X K/q Submenu 2 Application YES Pressing K turns on the camera and starts the camera in the shooting mode. Pressing q turns on the camera and starts the camera in the playback mode. NO The power is not turned on. To turn on the camera, press the n button. Saving the mode when the camera is turned off [SAVE SETTINGS] E SETUP X SAVE SETTINGS Submenu 2 Application YES The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. NO The shooting mode is set to P mode when the camera is turned on. When set to [YES], the following settings will be saved. Flash • Macro • Exposure compensation • White balance • ISO • R*1 (Still images/Movies) • FACE DETECT • *1 Available in the FE-45/X-40 only. When set to [NO], all shooting settings, except for P mode, [A IMAGE QUALITY], and the selected s mode, return to default settings when the camera is turned off. book̲d4398̲4387̲en̲UA.indb 31 book̲d4398̲4387̲en̲UA.indb 31 2008/11/18 10:24:12 2008/11/18 10:24:12
Page: 32
32 EN Selecting a video signal system to match your TV [VIDEO OUT] E SETUP X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Connect the TV and camera. FE-45/X-40: Connect to the TV video input jack (yellow) and audio input jack (white). Multi-connector AV cable (supplied) FE-35/X-30: Connect to the TV video input jack (yellow). Multi-connector Video cable (supplied) 2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/ [PAL]). 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Press the q button, and use klmn to select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped. book̲d4398̲4387̲en̲UA.indb 32 book̲d4398̲4387̲en̲UA.indb 32 2008/11/18 10:24:12 2008/11/18 10:24:12
Page: 33
33 EN Select the settings for the functions while referring to “Using the Menu” (p. 3). Saving battery power between shots [POWER SAVE] E SETUP X POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. ON When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button. Turning off the camera sounds [F SILENT MODE] F SILENT MODE Submenu 1 Application OFF Button operation sound/warning sound are not muted. ON The electronic sounds (button operation sound, warning sound) are muted. [BEEP] (p. 31) book̲d4398̲4387̲en̲UA.indb 33 book̲d4398̲4387̲en̲UA.indb 33 2008/11/18 10:24:13 2008/11/18 10:24:13
Page: 34
34 EN Printing 2 Turn on the printer, and then connect the printer and camera. USB cable (supplied) Multi-connector OK PC/CUSTOM PRINT EASY PRINT START n button 3 Press the n button to start printing. 4 To print another image, use mn to select an image, and press the B button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. PRINT EXIT OK Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge- compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [EASY PRINT] 1 Display the image to be printed on the monitor. “Viewing images” (p. 15) Printing can also be started when the camera is turned off. After performing Step 2, use kl to select [EASY PRINT], press the B button. Use mn to select an image, and press the B button. book̲d4398̲4387̲en̲UA.indb 34 book̲d4398̲4387̲en̲UA.indb 34 2008/11/18 10:24:13 2008/11/18 10:24:13
Page: 35
35 EN Changing the printer’s settings for printing [CUSTOM PRINT] 1 Follow Steps 1 and 2 for [EASY PRINT] (p. 34), and press the B button. EASY PRINT USB SET OK EXIT CUSTOM PRINT PC 2 Use kl to select [CUSTOM PRINT], and press the B button. 3 Use kl to select the print mode, and press the B button. Submenu 2 Application PRINT This prints the image selected in Step 6. ALL PRINT This prints all images stored in the internal memory or card. MULTI PRINT This prints one image in a multiple layout format. ALL INDEX This prints an index of all images stored in the internal memory or card. PRINT ORDER*1 This prints images based on the print reservation data on the card. *1 [PRINT ORDER] is available only when print reservations have been made. “Print Reservations (DPOF)” (p. 37) 4 Use kl to select [SIZE] (Submenu 3), and press n. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer’s standard. STANDARD STANDARD PRINTPAPER SET OK MENU BACK SIZE BORDERLESS 5 Use kl to select the [BORDERLESS] or [PICS/SHEET] settings, and press the B button. Submenu 4 Application OFF/ON*1 The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). (The number of images per sheet varies depending on the printer.) The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer’s standard settings. 100-0004 OK 4 IN SINGLEPRINT MORE PRINT 6 Use mn to select an image. 7 Press k to make a print reservation for the current image. Press l to make the detailed printer settings for the current image. To make the detailed printer settings 1 Use klmn to select the setting, and press the B button. SET OK EXIT MENU 1 PRINT INFO DATE FILE NAME <x WITHOUT WITHOUT P book̲d4398̲4387̲en̲UA.indb 35 book̲d4398̲4387̲en̲UA.indb 35 2008/11/18 10:24:14 2008/11/18 10:24:14
Page: 36
36 EN Submenu 5 Submenu 6 Application <× 0 to 10 This selects the number of prints. DATE WITH/ WITHOUT Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. FILE NAME WITH/ WITHOUT Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. P (Proceeds to the setting screen.) This selects a portion of the image for printing. To crop an image [P] 1 Use the zoom buttons to select the size of the cropping frame, use klmn to move the frame, and then press the B button. Cropping frame T W SET OK 2 Use kl to select [OK], and press the B button. P MENU BACK SET OK IN OK CANCEL 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [SINGLEPRINT]. 9 Press the B button. PRINT SET OK MENU BACK PRINT CANCEL 10Use kl to select [PRINT], and press the B button. Printing starts. When [OPTION SET] is selected in [ALL PRINT] mode, [PRINT INFO] screen is displayed. When printing is finished, the [PRINT MODE SELECT] screen is displayed. ALL PRINT PRINT MODE SELECT SET OK ALL INDEX PRINT ORDER MULTI PRINT PRINT EXIT MENU To cancel printing 1 When [TRANSFERRING] is displayed, press the B button, use kl to select [CANCEL], and then press the B button again. PRINT SET OK CONTINUE CANCEL CANCEL OK TRANSFERRING 11Press the m button. 12When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer. ● ● ● book̲d4398̲4387̲en̲UA.indb 36 book̲d4398̲4387̲en̲UA.indb 36 2008/11/18 10:24:14 2008/11/18 10:24:14
Page: 37
37 EN Print Reservations (DPOF*1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Make changes using the original device. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. Single-frame print reservations [<] 1 Press the q button, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the B button. PRINT ORDER SET OK < U EXIT MENU 3 Use kl to select [<], and press the B button. x 10M 2009.08.26 12:30 100-0004 4 0 NORM SET OK 4 Use mn to select the image for print reservation. Use kl to select the quantity. Press the B button. SET OK MENU BACK DATE TIME NO X 5 Use kl to select the [X] (date print) screen option, and press the B button. Submenu 2 Application NO This prints the image only. DATE This prints the image with the shooting date. TIME This prints the image with the shooting time. OK SET BACK MENU PRINT ORDER SET CANCEL 1 ( 1) 1 ( 1) 6 Use kl to select [SET], and press the B button. book̲d4398̲4387̲en̲UA.indb 37 book̲d4398̲4387̲en̲UA.indb 37 2008/11/18 10:24:15 2008/11/18 10:24:15
Page: 38
38 EN Reserving one print each of all images on the card [U] 1 Follow Steps 1 and 2 in [<] (p. 37). 2 Use kl to select [U], and press the B button. 3 Follow Steps 5 and 6 in [<]. Resetting all print reservation data 1 Press the q button, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the B button. 3 Select either [<] or [U], and press the B button. OK SET BACK MENU PRINT ORDER SETTING PRINT ORDERED RESET KEEP 4 Use kl to select [RESET], and press the B button. Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 of “Resetting all print reservation data” (p. 38). 2 Use kl to select [<], and press the B button. 3 Use kl to select [KEEP] and press the B button. 4 Use mn to select the image with the print reservation you want to cancel. Use kl to set the print quantity to “0”. 5 If necessary, repeat Step 4, and then press the B button when finished. 6 Use kl to select the [X] (date print) screen option, and press the B button. The settings are applied to the remaining images with the print reservation data. 7 Use kl to select [SET], and press the B button. ● book̲d4398̲4387̲en̲UA.indb 38 book̲d4398̲4387̲en̲UA.indb 38 2008/11/18 10:24:16 2008/11/18 10:24:16
Page: 39
39 EN Using OLYMPUS Master 2 System requirements and installation of OLYMPUS Master 2 Install the OLYMPUS Master 2 software by referring to the included installation guide. Connecting the camera to a computer 1 Make sure the camera is turned off. The monitor is off. The lens is retracted. 2 Connect the camera to a computer. The camera automatically turns on. EASY PRINT USB SET OK EXIT CUSTOM PRINT PC USB cable (supplied) Multi-connector Locate the position of the USB port by referring to your computer’s instructions manual. 3 Use kl to select [PC], and press the B button. The computer automatically detects the camera as a new device on the first connection. ● ● ● ● Windows After the computer detects the camera, a message indicating setup completion appears. Confirm the message and click “OK”. The camera is recognized as a removable disk. Macintosh If iPhoto has started, exit iPhoto and start OLYMPUS Master 2. While the camera is connected to the computer, shooting functions are disabled. Connecting the camera to a computer via a USB hub may cause unstable operation. When [MTP] is set for the submenu that appears by pressing n after selecting [PC] in Step 3, images cannot be transferred to a computer using OLYMPUS Master 2. Starting OLYMPUS Master 2 1 Double-click the OLYMPUS Master 2 icon. Windows appears on the desk top. Macintosh appears in the OLYMPUS Master 2 folder. Browse window appears after starting the software. When you start OLYMPUS Master 2 for the first time after installation, “Default Settings” and “Registration” screen appear. Follow the instructions on the screen. ● book̲d4398̲4387̲en̲UA.indb 39 book̲d4398̲4387̲en̲UA.indb 39 2008/11/18 10:24:16 2008/11/18 10:24:16
Page: 40
40 EN Operating OLYMPUS Master 2 When OLYMPUS Master 2 is started, the Quick Start Guide appears with step-by-step instructions for common tasks. When the Quick Start Guide is not displayed, click in the tool bar to show the Guide. For details on the operation, refer to the help guide of the software. Transferring and saving images without using OLYMPUS Master 2 This camera is compatible with the USB Mass Storage Class. You can transfer and save the image data on your computer while the camera and the computer are connected. System requirements Windows : Windows 2000 Professional/ XP Home Edition/ XP Professional/Vista Macintosh : Mac OS X v10.3 or later On a computer running Windows Vista, if [MTP] is set for the submenu that appears by pressing n after selecting [PC] in Step 3 of “Connecting the camera to a computer” (p. 39), Windows Photo Gallery will become available. Even if a computer has USB ports, proper operation is not guaranteed in the following cases. computers with USB ports installed using an expansion card, etc. computers without a factory-installed OS and home-built computers ● ● book̲d4398̲4387̲en̲UA.indb 40 book̲d4398̲4387̲en̲UA.indb 40 2008/11/18 10:24:17 2008/11/18 10:24:17
Page: 41
---- -- -- -- -- X Y M Y M D D TIME MENU CANCEL 41 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Troubleshooting Battery “The camera does not work even when batteries are installed”. Insert new or recharged batteries in the correct direction. “Loading the batteries and the xD-Picture CardTM (sold separately) into the camera” (p. 10) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Card/Internal memory “An error message is displayed”. “Error message” (p. 42) Shutter button “No picture is taken when the shutter button is pressed”. Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Press the K button to set a shooting mode. Wait until #(flash charge) stops blinking before taking pictures. ● ● ● ● ● Monitor “Difficult to see”. Condensation*1 may have occurred. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. “Vertical lines appear on the screen”. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. “The light is caught in the picture”. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Date and time function “Date and time settings return to the default setting”. If the batteries are removed and left out of the camera for about a day*2 , the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. “Setting the date and time” (p. 12) Miscellaneous “The camera makes a noise when taking pictures”. The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. ● ● ● ● ● book̲d4398̲4387̲en̲UA.indb 41 book̲d4398̲4387̲en̲UA.indb 41 2008/11/18 10:24:17 2008/11/18 10:24:17
Page: 42
42 EN Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action q CARD ERROR Card problem Insert a new card. q WRITE PROTECT Card problem Use a computer to cancel the read-only setting. > MEMORY FULL Internal memory problem Insert a card. Erase unwanted images.*1 • • q CARD FULL Card problem Replace the card. Erase unwanted images.*1 • • OK SET CARD SETUP CLEAN CARD FORMAT Card problem Use kl to select [CLEAN CARD], and press the B button. Take out the card, wipe the contact area (p. 46) with a soft, dry cloth, and then load the card again. Use kl to select [FORMAT], and press the B button. Next, use kl to select [YES], and press the B button.*2 • • IN OK SET MEMORY SETUP POWER OFF MEMORY FORMAT Internal memory problem Use kl to select [MEMORY FORMAT], and press the B button. Next, use kl to select [YES], and press the B button.*2 L NO PICTURE Internal memory/Card problem Take pictures before viewing them. r PICTURE ERROR Problem with selected image Use photo retouch software, etc. to view the image on a computer. If the image still cannot be viewed, the image file is corrupted. r THE IMAGE CANNOT BE EDITED Problem with selected image Use photo retouch software, etc. to edit the image on a computer. CARD-COVER OPEN Operation problem Close the battery/card compartment cover. g BATTERY EMPTY Battery problem Insert new batteries. If using rechargeable batteries, charge the batteries. • • NO CONNECTION Connection problem Connect the camera and computer or printer correctly. NO PAPER Printer problem Load paper into the printer. NO INK Printer problem Refill the ink in the printer. JAMMED Printer problem Remove the jammed paper. SETTINGS CHANGED*3 Printer problem Return to the status where the printer can be used. PRINT ERROR Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. r CANNOT PRINT*4 Problem with selected image Use a computer to print. *1 Before erasing important images, download them to a computer. *2 All data will be erased. *3 This is displayed, for instance, when the printer’s paper tray has been removed. Do not operate the printer while making the print settings on the camera. *4 This camera may be unable to print images taken by other cameras. book̲d4398̲4387̲en̲UA.indb 42 book̲d4398̲4387̲en̲UA.indb 42 2008/11/18 10:24:18 2008/11/18 10:24:18
Page: 43
43 EN Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Focusing “Focusing on the subject” Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. Pressing the shutter button halfway (p. 14) Taking a picture of subjects where autofocus is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture. Subjects with low contrast When extremely bright objects appear in the center of the screen Object with no vertical lines*1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. When objects are at different distances ● ● Fast-moving object The subject is not in the center of the frame Camera shake “Taking pictures without camera shake” Taking pictures using h mode (p. 18). Select j (SPORT) in s mode (p. 17) The j (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. Taking pictures at a high ISO sensitivity. If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. [ISO] (p. 25) Exposure (brightness) “Taking pictures with the right brightness” Taking pictures using [FACE DETECT] (p. 26) Appropriate exposure is obtained for a face against backlight, and the face is brightened. Taking pictures using [FILL IN] (p. 19) flash A subject against backlight is brightened. Taking pictures using exposure compensation (p. 20) Adjust the brightness while viewing the screen for taking the picture. Normally, taking pictures of white subjects (such as snow) results in images that are darker than the actual subject. Use the F button to adjust in the positive (+) direction to express whites as they appear. When taking pictures of black subjects, on the other hand, it is effective to adjust in the negative (-) direction. ● ● ● ● ● ● book̲d4398̲4387̲en̲UA.indb 43 book̲d4398̲4387̲en̲UA.indb 43 2008/11/18 10:24:18 2008/11/18 10:24:18
Page: 44
44 EN Color hue “Taking pictures with colors at the same shade as they appear” Taking pictures by selecting [WB] (p. 25) Best results in most environments can normally be obtained with the AUTO setting, but for some subjects, you should try experimenting with different settings. (This is especially true for sunshade under a clear sky, mixed natural and artificial light settings, and so on.) Taking pictures using [FILL IN] (p. 19) flash Use of the flash is also effective for shooting under fluorescent and other artificial lighting. Image quality “Taking sharper pictures” Taking pictures with the optical zoom Avoid using digital zoom (p. 19) to take pictures. Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity, noise (small colored spots and color unevenness that were not in the original image) can occur, and the image can appear grainy. The resulting image is grainier than with low ISO sensitivity as well. [ISO] (p. 25) Batteries “Making batteries last longer” Avoid any of the following operations when not actually taking pictures because they deplete the battery power. Repeatedly pressing the shutter button halfway Repeatedly using the zoom Set [POWER SAVE] (p. 33) to [ON]. ● ● ● ● ● ● ● ● Playback/Editing tips Playback “Playing images in the internal memory and card” Remove the card when playing pictures in the internal memory. “Loading the batteries and the xD-Picture card™ (sold separately) into the camera” (p. 10) “Using the microSD card/microSDHC card (sold separately)” (p. 11) Editing “Erasing the sound recorded to a still image” (FE-45/X-40) Record over the sound with silence when playing back the image “Adding sound to still images [R]” (p. 29) ● ● ● ● book̲d4398̲4387̲en̲UA.indb 44 book̲d4398̲4387̲en̲UA.indb 44 2008/11/18 10:24:19 2008/11/18 10:24:19
Page: 45
45 EN Appendix Battery handling precautions In addition to the batteries provided with the camera, the following types of battery can be used. Choose the power source best suited to the situation. AA alkaline batteries The number of pictures that you can take may vary considerably depending on the battery manufacturer and shooting conditions. AA NiMH batteries (rechargeable batteries) Olympus NiMH batteries are rechargeable and economical. For details, refer to the instruction manual for your charger. Caution: Use only batteries approved for use in this product. Otherwise it could result in explosion. Follow the instructions in this manual (p. 51) when disposing used batteries. The following types of batteries cannot be used: Lithium battery pack (CR-V3)/AA (R6) manganese (zinc-carbon) batteries/AA (R6) oxyride batteries/AA (R6) lithium batteries Power consumption by the camera varies depending on which functions are used. Power is consumed continuously during the conditions described below causing batteries to become exhausted quickly. The zoom is used repeatedly. The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. The camera is connected to a computer or printer. Battery life varies depending on the type of battery, manufacturer, shooting conditions, etc. Similarly, the camera may turn off without displaying the battery level warning or may display the battery level warning more quickly. • • • • • • • • Camera care Exterior Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor Wipe gently with a soft cloth. Lens Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. Mold may form on the lens surface if the lens is left dirty. Storage When storing the camera for extended periods, remove the battery and card, and keep in a cool, dry place that is well ventilated. Periodically insert the battery and test the camera functions. Avoid leaving the camera in places where chemical products are handled since this may result in corrosion. • • • • • book̲d4398̲4387̲en̲UA.indb 45 book̲d4398̲4387̲en̲UA.indb 45 2008/11/18 10:24:20 2008/11/18 10:24:20
Page: 46
46 EN Using an xD-Picture Card A card (and internal memory) also corresponds to the film that records images in a film camera. Otherwise, the recorded images (data) can be erased, and retouching is also available with the use of a computer. Cards can be removed from the camera and exchanged, but this is not possible with the internal memory. Use of larger capacity cards enables you to take more pictures. Index area (Notes can be filled in here) Contact area (Contact section of the card with the internal camera terminal) Do not touch the contact area directly. Cards compatible with this camera xD-Picture Card (16MB to 2GB) (TypeH/M/M+, Standard) Using a new card Before using a non-Olympus card or a card that was used for another purpose in a computer or other device, use [MEMORY FORMAT]/[FORMAT] (p. 30) to format the card. Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback. Current memory indicator IN : Internal memory is being used None: Card is being used 10M 2009.08.26 12:30 4 100-0004 IN NORM Current memory indicator Playback mode 10M 10M P 4 4 IN NORM NORM Shooting mode Even if [MEMORY FORMAT]/[FORMAT], [ERASE], [SEL. IMAGE], or [ALL ERASE] is performed, the data in the card is not completely erased. When disposing of the card, damage the card to prevent the disclosure of personal data. Readout/recording process of the card Never open the battery/card compartment cover or unplug the USB cable while the camera is reading or writing data, which is indicated by blinking of the card access lamp. This can not only damage the image data but also render the internal memory or card unusable. Card access lamp book̲d4398̲4387̲en̲UA.indb 46 book̲d4398̲4387̲en̲UA.indb 46 2008/11/18 10:24:20 2008/11/18 10:24:20
Page: 47
47 EN Number of storable pictures (still pictures)/Continuous recording length (movies) in the internal memory and xD-Picture Card Still pictures IMAGE SIZE COMPRES- SION Number of storable still pictures Internal memory Using a 1GB xD-Picture Card With sound*1 Without sound With sound*1 Without sound F 3648×2736 L 3 3 178 179 M 6 6 347 353 H 2560×1920 L 6 6 353 359 M 12 13 673 695 I 2048×1536 L 10 10 565 576 M 21 21 1,102 1,141 J 1600×1200 L 17 17 913 940 M 32 35 1,728 1,880 K 1280×960 L 26 27 1,390 1,453 M 48 55 2,557 2,906 C 640×480 L 87 110 4,567 5,813 M 152 203 7,993 10,657 D 1920×1080 L 16 16 841 875 M 31 32 1,639 1,728 *1 Available in the FE-45/X-40 only. Movies IMAGE SIZE FRAME RATE Continuous recording length Internal memory Using a 1 GB xD-Picture Card With sound*1 Without sound With sound*1 Without sound C 640×480 N 10 sec. 10 sec. 8 min. 59 sec.*2 9 min. 5 sec.*2 O 20 sec. 20 sec. 17 min. 48 sec. 18 min. 11 sec. E 320×240 N 28 sec. 29 sec. 24 min. 43 sec. 25 min. 28 sec. O 54 sec. 58 sec. 48 min. 2 sec. 50 min. 55 sec. The maximum file size of a single movie is 2 GB, regardless of the capacity of the card. *1 Available in the FE-45/X-40 only. *2 When using a TypeM or Standard xD-Picture Card, the maximum recording length will be 10 seconds. Increasing the number of pictures that can be taken Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase the images in the internal memory or card. [ERASE] (p. 16), [SEL. IMAGE] (p. 29), [ALL ERASE] (p. 29), [MEMORY FORMAT]/[FORMAT] (p. 30) book̲d4398̲4387̲en̲UA.indb 47 book̲d4398̲4387̲en̲UA.indb 47 2008/11/18 10:24:21 2008/11/18 10:24:21
Page: 48
48 EN Using the microSD Attachment Do not use the attachment with Olympus digital cameras that do not support this microSD Attachment, as well as with other brands of digital cameras, computers, printers, and other devices that support xD-Picture Card. Doing so not only may damage the pictures taken, but may also result in the malfunction of the device. If the microSD card cannot be removed, do not use force. Contact authorized distributors/service centers. Cards compatible with this camera microSD card/microSDHC card For a list of tested microSD cards, please visit our website (http://www.olympus.com/). Sending images You can send images to a computer or a PictBrige printer by using the USB cable provided with the camera. To send data to other devices, remove the attachment from the camera and use a commercially available microSD card adapter. Handling precautions Do not touch the contact area of the attachment or microSD card. Doing so may cause failure in reading the images. When fingerprints or stains are found on the contact area, wipe the area with a soft dry cloth. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. DANGER If the product is used without observing the information given under this symbol, serious injury or death may result. WARNING If the product is used without observing the information given under this symbol, injury or death may result. CAUTION If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result. WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT. General Precautions Read All Instructions — Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning — Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments — For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture — For precautions on products with weatherproof designs, read the weatherproofing sections. Location — To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source — Connect this product only to the power source described on the product label. Foreign Objects — To avoid personal injury, never insert a metal object into the product. Heat — Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. book̲d4398̲4387̲en̲UA.indb 48 book̲d4398̲4387̲en̲UA.indb 48 2008/11/18 10:24:21 2008/11/18 10:24:21
Page: 49
49 EN Handling the Camera WARNING Do not use the camera near flammable or explosive gases. Do not use the flash and LED on people (infants, small children, etc.) at close range. You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the subject’s eyes could cause a momentary loss of vision. Keep young children and infants away from the camera. Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: Becoming entangled in the camera strap, causing strangulation. Accidentally swallowing the battery, cards or other small parts. Accidentally firing the flash into their own eyes or those of another child. Accidentally being injured by the moving parts of the camera. Do not look at the sun or strong lights with the camera. Do not use or store the camera in dusty or humid places. Do not cover the flash with a hand while firing. Do not insert anything into the microSD Attachment other than the microSD card. Other types of cards cannot be inserted into microSD Attachment. Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. If you insert a card by mistake, such as a microSD card, do not use force. Contact authorized distributors/service centers. • • • • • • • • • • • • • • CAUTION Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a fire or burn your hands. Never hold or operate the camera with wet hands. Do not leave the camera in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire. Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused. In places subject to extremely cold temperatures, the temperature of the camera’s body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures. Be careful with the strap. Be careful with the strap when you carry the camera. It could easily catch on stray objects and cause serious damage. • • • • • • • • • • • book̲d4398̲4387̲en̲UA.indb 49 book̲d4398̲4387̲en̲UA.indb 49 2008/11/18 10:24:21 2008/11/18 10:24:21
Page: 50
50 EN Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns. DANGER Use only the Olympus brand NiMH batteries and proper fitting charger. Never heat or incinerate batteries. Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc. Never store batteries where they will be exposed to direct sunlight, or subjected to hightemperatures in a hot vehicle, near a heat source, etc. To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, solder, etc. If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical attention immediately. WARNING Keep batteries dry at all times. To prevent batteries from leaking, overheating or causing a fire or explosion, use only batteries recommended for use with this product. Never mix batteries (old and new batteries, charged and uncharged batteries, batteries of different manufacture or capacity, etc.). Never attempt to charge alkaline, lithium or CR-V3 lithium battery packs. Insert the battery carefully as described in the operating instructions. Do not use batteries if their body is not covered by the insulating sheet or if the sheet is torn, as this may cause fluid leaks, fire or injury. CAUTION Do not remove batteries immediately after using the camera. Batteries may become hot during prolonged use. Always unload the battery from the camera before storing the camera for a long period. • • • • • • • • • • • • • • • The following AA (R6) batteries cannot be used. Batteries whose bodies are only partially or not at all covered by an insulating sheet. Batteries whose - terminals are raised, but not covered by an insulating sheet. Batteries whose - terminals are flat and not completely covered by an insulating sheet. (Such batteries cannot be used even if the - terminals are partially covered.) If NiMH batteries are not charged within the specified time, stop charging them and do not use them. Do not use a battery if it is cracked or broken. If a battery leaks, becomes discolored, deformed or becomes abnormal in any other way during operation, stop using the camera. If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. Never subject batteries to strong shocks or continuous vibration. • • • • • book̲d4398̲4387̲en̲UA.indb 50 book̲d4398̲4387̲en̲UA.indb 50 2008/11/18 10:24:22 2008/11/18 10:24:22

Question & answers

Have a question about the Olympus FE-45 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus FE-45. Please make sure that you describe your difficulty with the Olympus FE-45 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus FE-45

Name
Email
Reaction

View a manual of the Olympus FE-45 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: FE-45
  • Filetype: PDF
  • Available languages: English, German, Spanish