Olympus DS-71 manual

User manual for the Olympus DS-71 in English. This PDF manual has 171 pages.

Page: 1
DIGITAL VOICE RECORDER DS-71 DS-61 ONLINE INSTRUCTIONS Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function and volume before use. EN
Page: 2
2 Introduction ● The contents of this document may be changed in the future without advanced notice. Contact our Customer Support Center for the latest information relating to product names and model numbers. ● The utmost care has been taken to ensure the integrity of the contents of this document. In the unlikely event that a questionable item, error, or omission is found, please contact our Customer Support Center. ● Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reasons is excluded from the Olympus’s liability. Trademarks IBM and PC/AT are the trademarks or registered trademarks of International Business Machines Corporation. Microsoft, Windows and Windows Media are registered trademarks of Microsoft Corporation. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. The product was developed based on noise-canceling technology under license from NEC Corporation. IBM ViaVoice and Dragon NaturallySpeaking are the trademarks or registered trademarks of Nuance Communications Inc. EUPHONY MOBILETM is a trademark of DiMAGIC Corporation. DVMTM is a trademark of DiMAGIC Corporation. Other product and brand names mentioned herein may be the trademarks or registered trademarks of their respective owners. Introduction
Page: 3
3 1 2 6 8 10 3 5 7 9 12 11 Table of Contents Safe and Proper Usage 4 Getting Started About Recording About Playback Erase and other functions Display and Sound Functions Menu Setting Using the Recorder onYour PC Managing Files on Your PC DSS Player Expanded Functions Importing content for listening on the recorder Enjoy Audible Content Other Practical Use Methods Other Information P.9 P.23 P.46 P.70 P.88 P.97 P.102 P.114 P.125 P.140 P.154 P.163 P.164 P.4 P.6 INDEX DS-71 INDEX DS-71 13
Page: 4
4 Table of Contents Introduction ............................................... 2 INDEX ...................................................... 3 Table of Contents ...................................... 4 Safe and Proper Usage ............................ 6 General Precautions ................................. 6 1 Getting Started Main Features .......................................... 9 Identification of Parts .............................. 11 Inserting Batteries ................................... 13 Using the AC Adapter ............................. 14 Power Supply ......................................... 15 HOLD ..................................................... 16 Setting Time/Date (Time&Date) .............. 17 Notes on the Folders .............................. 19 2 About Recording Before recording ..................................... 23 Recording ............................................... 25 Using the Variable Control Voice Actuator (VCVA) ............................................. 28 Recording Modes (Rec Mode) ................ 32 Set the method for adjusting the recording level (Rec Level) .............. 33 Microphone Sensitivity ............................ 35 Zoom Mic (Zoom Mic) ............................. 36 Set the Low Cut Filter (LowCut Filter) ..... 38 Recording from External Microphone or Other Devices .................................. 40 Timer Recording (Timer Rec) .................. 42 3 About Playback Playing ................................................... 46 Set Skip Space (Skip Space) .................. 50 Changing the Playback Speed (Play Speed) ....52 Select Play Mode (Play Mode) ................ 55 How to begin segment repeat playback ... 57 Noise Cancel Function (Noise Cancel) ... 59 Set the Voice Filter (Voice Filter) ............. 61 Increase the realistic sensation (EUPHONY) .................................... 63 Alarm Playback Function (Alarm)............ 65 Set the Intro Play (Intro Play) .................. 69 4 Erase and other functions Erasing ................................................... 70 Index Marks and Temp Marks ................. 73 Locking Files (Lock) ................................ 75 Changing Folder Names (Folder Name) ........... 77 Rearranging files (File Move) .................... 79 Formatting the Recorder (Format) .......... 81 Changing the USB Class (USB Class) ....... 83 Changing Power Save (Power Save)...... 84 Changing External Input Setting (Ext. Input) ... 85 Viewing system information (System Info.) .... 87 5 Display and Sound Functions LCD Display Information ......................... 88 Backlight (Backlight) .............................. 90 LED(LED) ............................................... 91 LCD Contrast Adjustment (Contrast) .... 92 Guidance (Voice Guide).......................... 93 System Sounds (Beep) ........................... 96
Page: 5
5 6 Menu Setting Menu Setting Method ............................. 97 Menu List ................................................ 99 7 Using the Recorder onYour PC Saving Files in Your PC ........................ 102 Using DSS Player Software .................. 104 Installing Software ................................ 105 Uninstalling Software ............................ 108 Using Online Help ................................. 109 Connecting to Your PC ......................... 110 Running DSS Player ............................. 112 Window Names (DSS Player) .................. 113 8 Managing Files onYour PC Download Voice Files from the Recorder ... 114 Play a Voice File ................................... 116 Upload Voice Files to the Recorder ....... 117 Send Voice Files with E-mail ................. 119 Changing User ID ................................. 119 Changing a Folder Name ...................... 120 Editing File Comments.......................... 120 Editing a Template ................................ 121 Copying Voice Guide Data .................... 122 USB Microphone/USB Speaker ............ 123 9 DSS Player Expanded Functions Upgrade Function ................................. 125 Using Voice Recognition Software ........ 127 Joining Files ......................................... 135 Splitting Files ........................................ 137 Menu Setting of this Recorder .............. 139 10 Importing Content for Listening on the Recorder Importing Content for Listening on the Recorder ........................................ 140 Using Windows Media Player ............... 141 Window Names (Windows Media Player) ................ 142 Copying Music from CD ........................ 143 Transferring Music File to the Recorder.... 144 Importing Podcast Content ................... 147 Bookmark mode .................................. 151 11 Enjoy Audible Content Loading Audible Content ....................... 154 Transferring Audible Content ................ 157 Enjoy Audible Content with the Recorder ... 159 12 Other Practical Use Methods Using as External Memory of the Computer .... 163 13 Other Information Alarm Message List .............................. 164 Troubleshooting .................................... 165 Accessories (optional) .......................... 167 Specifications ....................................... 168 Technical Assistance and Support ........ 170 Table of Contents
Page: 6
6 General Precautions Safe and Proper Usage Before using your new recorder, read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this manual in an easily accessible location for future reference. • The warning symbols indicate important safety related information. To protect yourself and others from personal injury or damage to property, it is essential that you always read the warnings and information provided. ● Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer. ● Do not store the recorder in places exposed to excessive moisture or dust. ● Do not use organic solvents such as alcohol and lacquer thinner to clean the unit. ● Do not place the recorder on top of or near electric appliances such as TVs or refrigerators. ● Avoid recording or playing back near cellular phones or other wireless equipment, as they may cause interference and noise. If you experience noise, move to another place, or move the recorder further away from such equipment. ● Avoid sand or dirt. These can cause irreparable damage. ● Avoid strong vibrations or shocks. ● Do not disassemble, repair or modify the unit yourself.
Page: 7
7 General Precautions ● Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart). ● Keep the unit out of the reach of children. <Warning regarding data loss> Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or during repair work. It is recommended to back up and save important content to other media such as a computer hard disk. Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reasons is excluded from the Olympus’s liability. Batteries Warning • Batteries should never be exposed to flame, heated, short-circuited or disassembled. • Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries. • Never use any battery with a torn or cracked outer cover. • Keep batteries out of the reach of children. • If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor: 1 remove the batteries immediately while being careful not to burn yourself, and; 2 call your dealer or local Olympus representative for service.
Page: 8
8 General Precautions AC Adapter Warning • Do not attempt to disassemble, repair or modify the AC adapter in any way. • Keep foreign objects including water, metal, or flammable substances from getting inside the product. • Do not moisten the AC adapter or touch it with a wet hand. • Do not use the AC adapter in the vicinity of flammable gas (including gasoline, benzine and lacquer thinner). In case • ... the internal parts of the AC adapter are exposed because it has been dropped or otherwise damaged: • ... the AC adapter is dropped in water, or if water, metal flammable substances or other foreign objects get inside it: • ... you notice anything unusual when using the AC adapter such as abnormal noise, heat, smoke, or a burning odor: 1 do not touch any of the exposed parts; 2 immediately disconnect the power supply plug from the power outlet, and; 3 call your dealer or local Olympus representative for servicing. Continued use of the AC adapter under these circumstances could result in electric shock, fire or injury. Plus The [DSS Player] can be upgraded to [DSS Player Plus], which is equipped with enhanced functionality (paid option). (☞ P125)
Page: 9
9 1 This product is equipped with the following features. Main Features Main Features ● This “IC recorder” is optimally suited for playing back audio recordings, such as conferences or business scenes, language studies, Podcasts, and other audible content. The recorder stores highly compressed WMA (Windows Media Audio) format voice messages in integrated flash memory. (☞ P22) It can also play back WMA and MP3 (MPEG-1/MPEG-2Audio Layer-3) format files. (☞ P46, 140) ● Supports the linear PCM format, which is capable of recording sound quality equivalent to CD-level. Capable of realistically recording various different sound sources. (DS-71 only) High resolution recording at a high sampling frequency and bit count equivalent to that of a music CD (Sampling frequency 44.1 kHz, Bit count 16bit) is possible. ● Several recording modes can be selected including stereo recording modes ST XQ (Stereo Extra High Quality Sound Recording), ST HQ (Stereo High Quality Recording) or ST SP (Stereo Standard Recording), and three types of monaural recording modes including HQ (High Quality), SP (Standard Recording), and LP (Long-tern Recording). (☞ P32) 1 Getting Started ● The recording level can be adjusted automatically or manually. (DS-71 only) ● An exclusive remote control can be attached to the recorder to control recording and stop operations. (☞ P24) ● It uses a removable stereo microphone. (☞ P23) • The stereo microphone can be removed when it is not necessary during playback, offering excellent portability. • If the stereo microphone is removed and attached to the exclusive remote control, it can be used as a remotely controlled stereo microphone. • Even if the stereo microphone is removed, the unit uses a built-in monaural microphone for recording. ● This USB storage class support recorder can be utilized as external memory to read and save the data. (☞ P163) • By connecting the computer with the USB, pictures, text data, etc. can be saved, and utilized to carry data. ● The guidance feature (in English and other languages) gives audio notification of operating conditions. It ensures seamless operation of various complex functions. (☞ P93)
Page: 10
10 1 Main Features Main Features ● You may assign your own names to folders. (☞ P77, 120) ● It has a built-in Variable Control Voice Actuator (VCVA) function. (☞ P28) ● Timer Rec and Alarm features enable automatic recording and playing at a set time. (☞ P42, 65) ● A directional microphone feature has been included that allows for switching between broad stereo recording and recording with a highly directional quality using a single special microphone. (☞ P36) ● The LowCut Filter minimizes air conditioner noise and other similar noises while recording. (☞ P38) ● Index mark and temp mark features allow you to quickly find desired locations. (☞ P73) ● The playback speed can be controlled as preferred. (☞ P52) ● A convenient intro play feature has been included for when searching for a file that you want to listen to. (☞ P69) ● A Noise Cancel Function (☞ P59) and a Voice Filter Function (☞ P61) cut noise and enable clear audio playback. ● EUPHONY MOBILE has been included to produce a natural, realistic experience without degrading sound quality. (☞ P63) ● Fast forward and rewind are possible at set intervals. (☞ P48) ● Comes with DSS Player software. (☞ P102) • If you transfer voice files recorded with the recorder to a PC, you can easily play back, organize, and edit the files. • If you connect the recorder to a computer, you can use it as a USB microphone or USB speaker. (☞ P123) ● The [DSS Player] can be upgraded to a [DSS Player Plus], which is equipped with a enhanced functionality (Option). (☞ P125) • If a commercial voice recognition software is utilized, the recorded voice file can be converted to characters automatically. (☞ P127) • In addition to the [DSS Player] functions, joining and splitting of the files and configuring the menu settings of this recorder, etc. can be performed. ● It is compatible with Podcasting. (☞ P147) • If favorite Internet radio-station URLs are registered in the DSS Player, the latest broadcasting content will be received automatically. Press the Podcast button on the recorder to quickly listen to the program (file) transferred from the DSS Player to the recorder. ● Compatible with Audible broadcasting. (☞ P154)
Page: 11
11 1 Identification of Parts Identification of Parts e = - ) q w ^ % $ & * ( 1 3 4 5 # ! 0 @ 6 7 8 2 9 # FOLDER/ button $ VOLUME (+) button % 9(Fast Forward) button ^ VOLUME (-) button & 0(Rewind) button * OK/MENU button ( ERASE button ) EAR (Earphone) jack - MIC SENSE(Microphone Sensitivity) switch = PC (USB) terminal q Battery cover w Power jack e Built-in speaker 1 Exclusive stereo microphone (ME55S) 2 MIC (Microphone) / REMOTE jack 3 Built-in monaural microphone 4 REC (Record) button 5 STOP button 6 PLAY button 7 DISPLAY/Podcast button 8 POWER/HOLD switch 9 Strap hole 0 Record/Play indicator light (LED) ! Display (LCD panel) @ LIST/INDEX button
Page: 12
12 1 r MIC (Microphone) jack t REC/STOP switch y Clip Identification of Parts 1 Folder name indicator 2 EUPHONY indicator 3 Record mode indicator 4 Play position bar indicator 5 Zoom Mic indicator 6 Erase lock indicator 7 Current file number 8 Totalnumberofrecordedfilesinthefolder 9 Character information display 0 Icon display Noise Cancel indicator Voice Filter indicator F. Play indicator S. Play indicator VCVA (Variable Control Voice Actuator) indicator Microphone sensitivity indicator Battery indicator Timer indicator Alarm indicator Low Cut Filter indicator Play Mode indicator 1 2 4 7 8 9 0 3 5 6 Folder A Remote Controller -RS29- Recording and stop operations can be performed by connecting the remote controller to the recorder. The remote controller can also be used as a remote controlled stereo microphone by connecting it to the exclusive stereo microphone (ME55S). Display (LCD Panel) Identification of Parts Folder A Folder A Display in the stereo recording mode Display in the playback mode
Page: 13
13 1 Inserting Batteries Inserting Batteries 1Lightly press down on the arrow and slide the battery cover open. 2Insert two AAA alkaline batteries, observing the correct polarity. 3Close the battery cover completely by pressing to the direction A, then sliding to the direction B. 4Slide the POWER/HOLD switch in the direction indicated by the arrow, and turn the power on. If the [hour] indicator flashes in the display, see [Setting Time/ Date (Time&Date)]. (☞P17) Replacing batteries The battery indicator on the display changes as the batteries lose power. → → → When appears on the display, replace the batteries as soon as possible. When the battery is too weak, [Battery Low] appears on the display and the recorder shuts down. When changing batteries, AAA alkaline batteries or Olympus Ni-MH Rechargeable Batteries (☞ P14) are recommended. 1 2 3 4
Page: 14
14 1 Notes • Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is in use may corrupt the file. If you are recording into a file and the batteries run out, you will lose your currently recorded file because the file header will not be able to close. It is crucial to change the batteries once you see only one Hash mark in the battery icon. • If it takes longer than 1 minute to replace dead batteries, you may have to reset the time when you load fresh batteries. (☞ P17) • Remove the batteries if you are not going to use the recorder for an extended period of time. Optional Ni-MH rechargeable batteries from Olympus can be used in the recorder. (☞ P167) Ni-MH Rechargeable Battery Inserting Batteries/Using the AC Adapter Inserting Batteries Warning • Always stop recording before connection or disconnection. • When the AC adapter is not in use, disconnect the power supply plug from the power outlet. • Use only the correct power supply voltage as indicated on the adapter. • Do not use the AC adapter when connecting the recorder to the USB port. Using the AC Adapter Plug the optional AC adapter (Olympus Model A328) into a household power outlet and connect the power plug to the recorder’s power connector (DC 3V). Always turn the recorder's power off or stop recording before connecting. If the AC adapter is plugged in while recording using batteries, it may not be possible to play back the voice data being recorded.
Page: 15
15 1 Power Supply When the recorder is not being used, turn the power off to reduce battery consumption to a minimum. Even if the power is turned off, existing data, mode settings, and clock settings will be maintained. Turning On the Power While the recorder’s power is off, slide the POWER/HOLD switch in the direction indicated by the arrow. The display will turn on, and, after [System Check] appears, the power will be turned on. The resume function will bring the recorder back to the stop position in memory before power was turned off. Turning Off the Power Slide the POWER/HOLD switch in the direction indicated by the arrow for 0.5 seconds or longer. The display shuts off and the power will be turned off. The resume function remembers the stop position before the power is turned off. If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it goes into power save mode. You can set the time to enter power save mode from among [5min.], [1 min.], [30min.], [1hour] and [Off] (☞ P84) To exit power save, press any button. Power save mode Power Supply
Page: 16
16 1 Set the recorder to HOLD mode Slide the POWER/HOLD switch to the HOLD position. After [Hold] appears on the display, the recorder is set to HOLD mode. Exit HOLD mode Slide the POWER/HOLD switch to the A position. HOLD If you bring the POWER/HOLD switch to the HOLD position, the current conditions will be preserved, and all buttons and switches will be disabled.This feature is useful when the recorder has to be carried in a bag or pocket. .................................................................................................................................................. Notes • If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the recorder. • If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged. (When playback has ended and the recording has ended due to the remaining memory being used up, it will stop.) • Even if the recorder is in HOLD mode, operations using the remote control are still available. HOLD
Page: 17
17 1 SettingTime/Date (Time&Date) If you set the date and time beforehand, the information when the file is recorded is automatically stored for each file. Setting the date and time beforehand enables easier file management. 1Press the 9 or 0 button to select the item to set. Select the item from [hour], [minute], [year] [month] and [day] with a flashing point. 2Press the + or – button to set. Follow the same steps by pressing the 9 or 0 button to select the next item, and press the + or – button to set. • You can choose between 12 and 24 hour display by pressing the DISPLAY button while setting the hour and minute. Example: 5:45 P.M. 5:45 PM ←→ 17:45 • You can choose the order of the year, month, day by pressing the DISPLAY button while setting them. Example: September 7, 2008 Setting Time/Date When you use the recorder for the first time after purchasing it, or turn the power on after having removed the batteries for one minute or longer to change them or for other purposes, the [Set Time&Date] message may appear. If the [Hour] indicator flashes, follow the steps below to set it. (Initial setting) 2 1 9M 7D 2008Y (Initial setting) 7D 9M 2008Y 2008Y 9M 7D
Page: 18
18 1 1Press the + or – button in the menu screen, and select the [Time&Date]. See P97, 99 regarding the menu. 2Press the OK or 9 button. The Time/Date screen appears. The hour indicator flashes, indicating the start of the Time/Date setup process.The following steps are the same as Step 1 through Step 3 of [Setting Time/Date (Time&Date)]. (☞ P17) 3Press the STOP button to close the menu. 3Press the OK button to complete the setup screen. The clock will start from the set date and time. Press the OK button according to the time signal. ........................................................................................................ Notes • If you press the OK button during the setup operation, the recorder will save the items that were set to that point. • After setup, a message will sound saying that If the guidance is not required, select [Off], and the screen goes into [Voice Guide] setup. (☞ P93) If you don’t want the guidance feature, select [Off]. SettingTime/Date (Time&Date) 3 3 2 1 Changing the Time/Date Press the STOP button while the recorder has stopped recording to check [Time&Date] and [Remain]. If the [Time&Date] is not correct, set it using the procedure below. Setting Time/Date
Page: 19
19 1 Notes on the Folders There are a total of eight folders in the recorder that are in a tree format. Under the [Root] folder are [FolderA] through [Folder E], [Audible] and [Music] folders, and recorded or transferred language and music data from a computer can be saved as [files]. [FolderA] through [Folder E] are voice-recording folders, so choose one of these five folders when recording on this recorder. Up to 200 files can be saved in each folder, and up to two layers can be created within the [Music] folders. [Audible] folder can be purchased from an Audible web site (☞ P155) by using the [Audible Manager], and files transferred to the recorder (☞ P156) are saved in this folder (in ACELP/MP3 format). A [Podcast] folder, for saving files distributed (☞ P147) by Podcasting, is prepared in advance inside the [Music] folder. .................................................................................................................................................. Notes • Up to 128 folders can be created under the [Music] folder including [Music]] and [Podcast]. • When using Windows Media Player 10, click [Start Sync] instead of setting the synchronization options. All the files will be transferred to the part A above. (☞ P145) • It is not possible to create a folder in the [Audible] folder. First layer Second layer Folder File Save up to 200 files. Each folder in [Folder A] through [Folder E] can save up to 200 voice files. Notes on the Folders
Page: 20
20 1 Notes on the Folders Notes on the Folders Selecting the Folders and Files List display The folders and files recorded in this recorder are displayed. File display Information of the selected file is displayed. Enters in playback standby mode. Upper (selected) folder Scroll bar (appears when the whole contents cannot be displayed) aUpper (selected) folder bName of the file Files with tag data Folder A Press the FOLDER button to switch folders Press the FOLDER button while the recorder is stopped. ➥Every time the Folder button is pressed, it cycles through [Folder A] through [Folder E] and the [Audible] [Music] folder, and it shows a list of files and folders recorded within each folder. When the [Audible] folder is opened, the recorder enters the Audible mode. (☞ P159) Open the [Podcast] folder While the recorder is stopped, press the Podcast button for one second or longer. ➥If the [Podcast] folder under the [Music] folder is opened, a list of files and folders within the folder will appear. For [Podcast] please see P147.
Page: 21
21 1 Notes on the Folders How to select a folder and file You can select a desired folder and file even without using the FOLDER button or the Podcast button. Selecting [Folder A] folder Selecting [DS710001] file If a folder or file is selected with the OK button, playback will begin. If a folder or file is selected with the OK button, playback will begin. Selecting [DS710003] file Selecting [Music] folder Selecting [Contents] folder Selecting [Chapter 1] folder Selecting [Contents01] file 9 or OK button: Opens the selected folder/file. 0 button:Returnstotheupperfolder. LIST button: Returns to the upper folderwhileinthelistdisplay,andreturns to the list display while in the file display. + or - button: Moves the cursor up and down. * Youcanalsostartplayingbackafilebypressing the Play button while a list of files is on display. Notes on the Folders Selecting [Chapter 3] The recorder switches to the Audible mode. Selecting [Audible] folder When the PLAY button is pressed, the recorder starts to play back a file from the Playback Position. (☞ P160)
Page: 22
22 1 Notes on the Folders DS71 0001.WMA Extension: Files recorded by this device are saved in WMA or linear PCM format with the file extensions .WMA or .WAV. File number : A serial number automatically assigned by a Digital Voice Recorder. User ID : The name that has been set on the Digital Voice Recorder. The default name on the Digital Voice Recorder is [DS71] or [DS61]. The user ID can be modified with DSS Player. (☞ P119) File names will be automatically created for files recorded by this recorder. Notes on the Folders
Page: 23
23 2 Before recording 2 About Recording This recorder offers a wide range of recording options by using the exclusive stereo microphone, built-in monaural microphone, and exclusive remote control. Choose a recording method according to your need. Before recording Stereo recording using the exclusive stereo microphone Plug the exclusive stereo microphone into the recorder’s MIC/ REMOTE jack for stereo recording in ST XQ, ST HQ and ST SP modes and monaural recording in HQ, SP, and LP modes. The DS-71 can also record in linear PCM format. Connect the exclusive stereo microphone to the recorder’s MIC/REMOTE jack. Monaural recording with the built-in microphone Even if the exclusive stereo microphone is unplugged, recordings can be still made using the recorder’s built-in microphone. Unplug the exclusive stereo microphone from the recorder. .......................................................................................................... Notes • The ME55S is the microphone for the DS-71 and DS-61. • The ME53S external microphone for the DS-50/40/30 cannot be used. • If a recording is made in PCM, ST XQ, ST HQ and ST SP modes while the exclusive stereo microphone is unplugged, it will be a monaural recording through the built-in microphone, and same audio will be recorded on both Left channel (Lch) and Right channel (Rch). • Stop the recorder before plugging in or unplugging a microphone.
Page: 24
24 2 Before recording Before recording Use the remote control for operation Plug the exclusive remote control into the recorder’s MIC/REMOTE jack to use the remote control to operate the recorder. Connect the exclusive remote control to the recorder’s MIC/REMOTE jack. ➥Use the REC/STOP switch on the exclusive remote control to start and stop recording with the recorder’s built-in microphone. (☞ P25) .......................................................................................................... Notes • Even when the exclusive remote control is plugged in, the recorder’s buttons are still usable. • Even when the recorder is in Hold mode (☞ P16), the exclusive remote control’s REC/STOP switch is still usable. • When the switch of the exclusive remote control is set to STOP and the REC button on the recorder is pressed, the recorder starts recording with the microphone that has been connected to the exclusive remote control. Recording will not be made if a microphone is not connected to the exclusive remote control. Use it as a remotely controlled stereo microphone If the exclusive stereo microphone is removed from the recorder and plugged into the exclusive remote control’s Mic jack, it can be used as a remotely controlled stereo microphone. Connect the exclusive stereo microphone to the exclusive remote control’s Mic jack. ➥Use the REC/STOP switch on the exclusive remote control to start and stop recording on the recorder. (☞ P25) .......................................................................................................... Notes • Even when the exclusive remote control is plugged in, the recorder’s buttons are still usable. • Turn the exclusive remote control’s switch to Stop and press the recorder's REC button to start and stop recording using the remote-control stereo microphone.
Page: 25
25 2 Recording 1Press the FOLDER button to choose a folder in which to make a recording. Every time the FOLDER button is pressed, folders will switch. (☞ P20) 2Press the REC button to start recording. The record/play indicator light glows red. Turn the microphone in the direction of the source to be recorded. The display changes depending on the recording mode. (☞ P32) When the exclusive remote control is connected, the remote control’s REC/STOP switch will work the same as the recorder’s REC and STOP buttons. a Current recording mode b Recording elapsed time c Memory remaining indicator (E/F bar) (The bar indicates remaining memory) d Level meter (varies according to the sound volume being recorded) Every time the DISPLAY button is pressed while recording, [Recording elapsed time] and [Remaining recording time] cycles in the location indicated by b. 3Press the STOP button to stop recording. Display in the stereo recording mode Display in the monaural recording mode 3 2 Before starting recording, select a folder between Folder A to Folder E. These five folders can be selectively used to distinguish the kind of recording; for example, Folder A might be used to store private information, while Folder B might be dedicated to holding business information. Newly recorded audio will be saved as the last file in the selected folder. Recording Folder A Folder A 1
Page: 26
26 2 Pause Press the REC button while recording. ➥[Rec Pause] will flash on the display. • When leaving the device idle while pausing recording for over 1 minute, the device will beep at a 5 second interval to notify the user that the device is paused. • The recorder will time out after 2 hours when left in [Rec Pause]. Resume Recording Press the REC button again. ➥Recording will resume at the point of interruption. Recording Recording Notes • If you select a folder other than A through E and press the REC button, an [Illegal Folder] message will flash. Select a folder from A through E and start recording again. • To ensure recording from the beginning, start speaking after you see the red record/play indicator light on. • A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds while recording. • When remaining recording time is less than 60 seconds, the record/play indicator light starts flashing in red. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster. • [Memory Full] or [Folder Full] will be displayed when the memory or folder capacity is full. Delete any unnecessary files before recording any further. (☞ P.70)
Page: 27
27 2 To EAR (earphone) jack Recording Recording Listening While Audio is Recorded If you start recording after inserting the earphone into the EAR jack on the recorder, you can hear the sound being recorded. The sound volume on the recording monitor can be adjusted by pressing the VOLUME (+) or VOLUME (–) button. Connect the earphone to the EAR jack on the recorder. ➥After recording has started, you can hear the sound being recorded through the earphone. If the earphone is connected, no sound will come from the speaker. .......................................................................................................... Notes • Recording level cannot be controlled using the volume button. • When using the earphones, do NOT set the volume too high. Listening at very high volume may lead to hearing loss. • Do not place earphones near a microphone as this may cause feedback.
Page: 28
28 2 1While the recorder is stopped or during recording, press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [VCVA]. 3Press the OK or 9 button. The [VCVA] setup process begins. 4Press the + or – button to choose [ON/OFF]. 5Press the OK or 9 button. 6Press the + or – button to choose between [On] and [Off]. [On]: Will start recording in VCVA mode. [Off]:Will resume recording in normal mode. When [On] is selected, a VCVA indication will be displayed on the screen. a VCVA (Variable Control Voice Actuator) indicator 7Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. Using theVariable ControlVoice Actuator (VCVA) When the microphone senses that sounds have reached a preset threshold volume level, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when the volume drops below the threshold level. The VCVA feature extends recording time and conserves memory by stopping recording during silent periods, which helps the playback to be more efficient. Using the Variable Control Voice Actuator 7 1 3,5 2,4,6
Page: 29
29 2 8Press the STOP button to close the menu. If it returns to the menu screen during recording, press the 0button to close the menu screen. 9Press the REC button to start recording. When the sound volume is lower than the preset threshold sound level, recording automatically stops after 1 sec approximately, and [Standby] flashes on the display. The record/play indicator light glows red when recording starts and flashes when recording pauses. Using theVariable ControlVoice Actuator (VCVA) 9 8 3,5 4 1 2 Adjust the initial VCVA level (DS-71) 1While the recorder is recording or paused, hold down the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [VCVA]. The [VCVA] setup process begins. 3Press the OK or 9 button. 4Press the + or – button to choose [Level]. The [Level] setup process begins. 5Press the OK or 9 button. Using the Variable Control Voice Actuator
Page: 30
30 2 6Press the 9 or 0 button adjust the pause sound level. The VCVA level can be set to any of 15 different values. The higher the value, the more sensitive the recorder to sounds. At the highest value, even the faintest sound will activate recording. The VCVA pause sound level can be adjusted according to the ambient (background) noise. b Level meter (varies according to the sound volume being recorded) c Start level (moves to the right/left according to the set level) 7Press the OK button to finish settings, then press the 0 button to close the Menu Screen. .................................................................................................................................................. Notes • The start/stop actuation level also varies depending on the selected microphone sensitivity mode. (☞ P35) • If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the recording situation. • To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. 6 7 Using theVariable ControlVoice Actuator (VCVA) Press the 9 or 0 button while the recorder is recording or paused to adjust the initial VCVA level. The VCVA level can be set to any of 15 different values. The higher the value, the more sensitive the recorder to sounds. At the highest value, even the faintest sound will activate recording. The VCVA pause sound level can be adjusted according to the ambient (background) noise. b Level meter (varies according to the sound volume being recorded) c Start level (moves to the right/left according to the set level) Adjust the initial VCVA level (DS-61) VCVA Level Using the Variable Control Voice Actuator
Page: 31
31 2 Using the Variable Control Voice Actuator 1While the recorder is stopped or during recording, press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [VCVA]. 3Press the OK or 9 button. 4Press the + or – button to choose [Standby Monitor]. 5Press the OK or 9 button. The [Standby Monitor] setup process begins. 6Press the + or – button to choose between [On] and [Off]. 7Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. 8Press the STOP button to close the menu. If it returns to the menu screen during recording, press the 0button to close the menu screen. Using theVariable ControlVoice Actuator (VCVA) 8 3,5,7 4,6 1 2 VCVA standby monitor setting When [Standby Monitor] is set to [On] with the menu setting, the recording will not be output from the earphone while in VCVA standby. When you monitor your recording with the earphone connected, you can check whether VCVA is launched or not by checking if an audio is output.
Page: 32
32 2 Recording Modes (Rec Mode) 1While the recorder is stopped,press the MENU button for 1 second or longer. [Rec Mode] will be displayed on the screen. (☞ P97, 99) 2Press the OK or 9 button. The [Rec Mode] setup process begins. 3Press the + or – button to choose from [PCM], [ST XQ], [ST HQ], [ST SP], [HQ], [SP] and [LP]. 4Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. 5Press the STOP button to close the menu. a Record mode indicator Press the STOP button while the recorder is stopped to check [Remaining Memory] and [Remaining Recording Time] in the selected recording mode. Recording Modes 2 1 3 4 5 The recording mode can be chosen from PCM (DS-71 only), ST XQ (stereo extra high quality sound recording), ST HQ (stereo high quality sound recording), ST SP (stereo standard recording), HQ (high quality sound recording), SP (standard recording), and LP (long-term recording).
Page: 33
33 2 Setthemethodforadjustingtherecordinglevel (Rec Level) (DS-71 only) 1While the recorder is stopped,press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [Rec Level]. 3Press the OK or 9 button. The [Rec Level] setup process begins. 4Press the + or – button to choose between [Manual] and [Auto]. [Manual]:Recording is performed by manually adjusting the recording level. [Auto]:Recording is performed by automatically adjusting the recording level. This is useful for when you will be recording right away. 5Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. 6Press the STOP button to close the menu. Set the method for adjusting the recording level 6 You can set the device to automatically or manually adjust the recording level. 5 3,5 3,5 4 3 1 2
Page: 34
34 2 Press the 9 or 0 button while the recorder is recording or paused to adjust the recording level. • The recording level will be automatically adjusted when the recording level is set to [Auto]. Set the recording level to [Manual] to use the recording level adjustment feature. • When the unit is set to [Manual], the limiter function will be disabled. Distorted sound will be recorded during [OVER] is displayed. Adjust the recording level so that [OVER] is not displayed. • [OVER] may be displayed even when the indicator of the recording level meter does not reach or is over to the right. • Inputting a very loud sound may produce noise even when the recording level is set to [Auto]. • The level can be adjusted from [01] to [13]. The higher the number, the higher the level and the larger the indicator position on the level meter. Set the method for adjusting the recording level Adjust the recording level Set the method for adjusting the recording level (Rec Level)
Page: 35
35 2 Microphone Sensitivity Microphone Sensitivity Microphone sensitivity is adjustable to meet recording needs. .................................................................................................................................................. Notes • When the speaker’s voice is to be recorded clearly, set it to [DICT] (dictation) mode. If breath directly hits the microphone it will be noisy, so keep the microphone a little lower than the speaker’s mouth (5 to 10cm/2 to 4 inches) while recording. • If background noise is affecting your recording even in [DICT] (dictation) mode, we recommend that you either set the directional microphone (☞ P36) to [Zoom] or [Narrow] or use an ME12 dictation microphone (sold separately, ☞ P167). While the recorder is stopped or during recording, slide the Mic Sense switch and select a microphone sensitivity among [LECTURE], [CONF], and [DICT]. Every time the setting is switched, it cycles through the display’s microphone sensitivities. LECTURE( ): Highest recording sensitivity suitable for conferences with large crowds and recording audio at a distance or low volume. CONF( ): Suitable for recording meetings and seminars with a small number of people. DICT( ): Lowest recording sensitivity suitable for dictation. a Microphone sensitivity display
Page: 36
36 2 Zoom Mic (Zoom Mic) 1While the recorder is stopped,press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [Zoom Mic]. 3Press the OK or 9 button. The [Zoom Mic] setup process begins. 4Press + or – to select the direction of the internal stereo microphone [Zoom]: Recording with monaural, however you can record high directivity sound. [Narrow]: Recording by a directivity stereo sound. [Wide]:Recording by an expansive stereo sound. [Off]: Disables this function. 5Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. Zoom Mic 5 The directional microphone function utilizes DiMAGIC’s (DiMAGIC Co., Ltd.) DiMAGIC Virtual Microphone (DVM) technology. DVM is an audio pickup system which allows you to record by focusing on sound from any direction. From expansive stereo recording to high directivity recording, DVM represents the latest in directional control methods that allow you to switch to a single exclusive microphone. 1 2 3,5 3,5 4 3
Page: 37
37 2 6Press the STOP button to close the menu. If it returns to the menu screen during recording, press the 0 button to close the menu screen. If it is set to [Zoom], [Narrow] or [Wide], will appear on the display. a Zoom Mic indicator Zoom Mic 6 Zoom Mic (Zoom Mic) .................................................................................................................................................. Notes • When changing the directional microphone’s level to [Zoom], [Narrow], or [Wide], the setting will remain active until it is switched to [Off]. • The directional microphone feature is designed to only function when used with the included microphone (ME55S). Please take note that you will not be able to record properly when using a commercially sold microphone. • The directional microphone feature cannot be used with the internal monaural microphone. Directional Microphone Feature Directionality (high) Directionality (Low) Sound collection range (narrow) Sound collection range (wide) Concept diagram
Page: 38
38 2 1While the recorder is stopped or during recording, press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [LowCut Filter]. 3Press the OK or 9 button. The [LowCut Filter] setup process begins. 4Press the + or – button to choose between [On] and [Off]. [On]: Low Cut Filter will be turned on. [Off]: Low Cut Filter will be cancelled. If it goes to the menu screen during recording, move the cursor and the Low Cut Filter will be turned On/Off according to the movement so you can check the effect with the recording monitor. (☞ P27) If it is set to [On], will appear on the display. a Low Cut Filter indicator Set the Low Cut Filter (LowCut Filter) Set the Low Cut Filter The recorder has a Low Cut Filter function to minimize low-frequency sounds and record voices more clearly. This function can reduce noise from air conditioners, projectors and other similar noises. 1 2 3 4
Page: 39
39 2 Recording for conferences and other large groups. Recording for classroom lectures and other spacious venues. Meetings and business negotiations with a small number of people Dictation with a lot of background noise Music playing, wild birds singing, and railway sounds Dictation in a quiet environment Exclusive stereo microphone (ME55S) Microphone Sensitivity LECTURE 5Press the OK button to complete the setup screen. If the 0 button is pressed, the setting will be canceled and it will return to the menu. 6Press the STOP button to close the menu. If it returns to the menu screen during recording, press the 0 button to close the menu screen. Set the Low Cut Filter (LowCut Filter) Set the Low Cut Filter 5 6 Recommended settings by recording condition Recommended settings There is no particular recommendation. Choose a setting for recording. *1: Set the microphone sensitivity according to the volume being recorded. CONF DICT Low Cut Filter Recording condition Microphone Sensitivity *1 Microphone Recoding Modes The recording level can be adjusted to suit the volume of the original sound ON OFF Zoom Mic You can set the directionality of the exclusive stereo microphone depending on the sound source.
Page: 40
40 2 The external microphone and other devices can be connected and the sound can be recorded. Connect as follows by the device to be used. Recording from External Microphone or Other Devices Recording from External Microphone or Other Devices To MIC (microphone) jack Recording with External Microphone Connect an external microphone to the MIC jack of the recorder or the exclusive remote control connected to the recorder. The internal microphone does not operate when an external microphone is connected to the microphone jack of the device. Applicable External Microphones (optional) ● Stereo microphone: ME51S The built-in large-diameter microphone enables sensitive stereo recording. Stereo recording is available only in PCM (DS-71only), STXQ, STHQ or STSP modes. ● Highly sensitive noise-cancellation monaural microphone:ME52 This microphone is used to record sound at a distance while minimizing surrounding noise. ● Noise-Cancellation monaural microphone: ME12 (Dictation microphone) Used to get clear recordings of your own voice by reducing the effects of ambient noise. ● Tie clip microphone: ME15 (monaural) Small concealing microphone with a tie-clip. ● Telephone pickup: TP7 (monaural) Earphone type microphone can be plugged into your ear while phoning. The voice or conversation over the phone can be clearly recorded. If the menu's [Ext. Input] (☞ P85) is set to [Auto], a connected external microphone will automatically detect whether it is stereo or monaural, and record according to the proper recording mode.
Page: 41
41 2 .................................................................................................................................................. Notes • Use the connecting cord sold separately for dubbing (KA333) to connect the recorder with other devices. • The detailed input levels cannot be adjusted with this recorder. When you connect the recorder to an external device, execute a test recording and adjust the output level of the external device. • A microphone with plug-in power, which receives the power supply from this recorder, can be used. • The directional microphone feature (☞ P36) is designed to only function when used with the included microphone (ME55S). Please take note that you will not be able to record properly when using a commercially sold microphone. VOLUME EAR ME EAR To MIC (microphone) jack To audio output terminal of other devices Recording from External Microphone or Other Devices Recording from External Microphone or Other Devices Recording the Sound of Other Devices withThis Recorder The sound can be recorded when connecting to the audio output terminal (earphone jack) of the other device, and the microphone jack of the recorder with the connecting cord (optional KA333)(☞ P167) for dubbing. Recording the Sound ofThis Recorder with Other Devices The sound of this recorder can be recorded to other devices when connected to the audio input terminal (microphone jack) of other devices and the earphone jack of this recorder, with the connecting cord (optional KA333) for dubbing. To audio input terminal of other devices To EAR (earphone) jack
Page: 42
42 2 1While the recorder is stopped, press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [Timer Rec]. 3Press the OK or 9 button. The [Timer Rec] setup process begins. 4Press the + or – button to select a preset number. Press the DISPLAY button to show the [Day] and the [Time] set for the preset number the cursor is pointing at. 5Press the OK or 9 button. 6Press the + or – button to select the item to set. Select items you want to set from among [On/ Off], [Day], [Time], [Rec Mode], [Folder], and [Mic Sense]. Select [Finish] to complete the setting and return to the preset number selection display in Step 4. 7Press the OK or 9 button to move to the respective setting. For procedures for each setting, please see P43 and P44. Timer Recording (Timer Rec) Timer Recording 7 6 1 2 3,5 3,5 4 3,5 Timer recording is the function to execute a recording at a set time. You can program up to three desired settings (Preset 1-3) ([On/Off], [Day], [Time], [Rec Mode], [Folder], and [Mic Sense]).
Page: 43
43 2 [On/Off] setting 1 Press the + or – button to choose between [On]and [Off]. [On]: Setting will be applied. [Off]: Setting will not be applied. 2 Press the OK button to exit [On/Off] selection. [Day] setting 1 Press the + or – button to choose from [Only once], [Everyday], and [Every week]. [Onlyonce]:Recordsonlyonceatthespecifiedtime. [Everyday]:Recordseverydayatthespecifiedtime. [Every week]: Make a recording at a set time on a specified day of the week. Select [Every week] and press the OK or 9 button to move to the selection of [Day]. Press the + or – button to select a day of the week. 2 Press the OK button to exit [Day] selection. [Time] setting 1 Press the 9 or 0 button to select [Hour] and [Minute] to start recording and [Hour] and [Minute] to stop recording. 2 Press the + or – button to set. 3 Press the OK button to exit [Time] selection. Timer Recording (Timer Rec) Timer Recording 2 1 2 1 2 1 3
Page: 44
44 2 [Rec Mode] setting Regardless of the regular Rec mode (☞ P32), timer recording will start in a set recording mode. 1 Press the + or – button to select a recording mode. 2 Press the OK button to exit [Rec Mode] selection. [Folder] setting 1 Press the + or – button to select the folder in which the recording will be saved. 2 Press the OK button to exit [Folder] selection. [Mic Sense] setting Regardless of the recorder’s microphone sensitivity setting (☞ P35), timer recording will start at a set microphone sensitivity. 1 Press the + or – button to choose from [Lecture], [Conference], and [Dictation]. 2 Press the OK button to exit [Mic Sense] selection. Timer Recording 2 1 2 1 2 1 Timer Recording (Timer Rec)
Page: 45
45 2 8Completing the setting. 1 Press the + or – button to choose [Finish]. 2 Press the OK button to complete the setup screen. Programmed settings will be applied and the screen will return to the preset number selection menu. If the On/Off setting is set to On, and (Timer indicator) will appear on the display. If you press the 0 button without pressing the OK button, all settings will be canceled and it will return to the preset number selection menu. a Timer indicator When setting other preset numbers, repeat Steps 4 through 8. 9Press the STOP button to close the menu. Timer Recording Timer Recording (Timer Rec) 2 1 9 .................................................................................................................................................. Notes • If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder. • Even if the power if turned off or the recorder is put on Hold, timer recording will start at a specified time. • If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3] has the lowest. • If the starting time for timer recording and alarm playback (☞ P65) is set for the same time, timer recording will have priority. • If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording. • The microphone sensitivity switch setting will be canceled during timer recording. • If the [Time&Date] is not correct, timer recording cannot be set at the specified time, so make sure the [Time&Date] is correct before setting timer recording. If it is not correct, reset [Time&Date]. (☞ P18)
Page: 46
46 3 1Press the FOLDER button to choose a folder. Every time the FOLDER button is pressed, it cycles through folders and the List display will appear. (☞ P20) 2Press the + or – button to choose the file that you want to play. If the 9 button is pressed, the File display will open. In the File display, press the 9 or 0 button to select a file. If you want to return from the File display to the List display, or go back from the List display to a higher-level List display, press the LIST button. Playing Playing List display File display The recorder can playback WAV(DS-71 only), MP3 and WMA format files. To playback a file recorded with other machines, you need to transfer (copy) it from a computer. (☞ P114) Files saved in the Audible folder can play back in the Audible mode. For operation methods in the Audible mode, see P159. 3 About Playback 1 2
Page: 47
47 3 3Press the PLAY or OK button to start playback. The record/play indicator light glows green. For files created using machines other than this recorder, the file format will appear on the display. ....MP3 files ....WMA files a Play position bar indicator b Current playback time c File name d File format indicator 4Press the + or – button to select the proper sound volume. The display shows the volume level. You can choose between 0 and 30. e Volume level meter 5Press the STOP or OK button at any point you want to stop the playback. Stop a file play back at any point. Press the PLAY or OK button to start playing back from where it was stopped. You can change the display patterns. (☞ P88) The displays indicated in this manual are default. Playing 3 4 5 .................................................................................................................................................. Notes • Playable file bitrates are 5-256kbps in WMA format, and 8-256kbps in MP3 format. • Variable bitrate MP3 files (in which conversion bitrates can vary) may not play properly. • For WAV files, this recorder can only play back those in the linear PCM format. WAV files other than these cannot be played back. (DS-71 only) • It is possible to playback the WMA files which are created by the Olympus Digital Voice Recorder. Playing
Page: 48
48 3 Forwarding Press and hold the 9 button while the recorder is stopped. ➥If you release the button, it will stop. Press the PLAY or OK button to start playing back from where it was stopped. a File length Press and hold the 9 button while playing a file. ➥When you release the 9 button the recorder will resume normal playback. • If there is an index mark or temp mark (☞ P73) in the middle of the file, the recorder will stop at that location. • The recorder stops when it reaches the end of the file. Continue pressing the 9 button to proceed with the cue from the beginning of the next file. Rewinding Press and hold the 0 button while the recorder is stopped. ➥If you release the button, it will stop. Press the PLAY or OK button to start playing back from where it was stopped. a File length Press and hold the 0 button while playing a file. ➥When you release the 0 button the recorder will resume normal playback. • If there is an index mark or temp mark (☞ P73) in the middle of the file, the recorder will stop at that location. • The recorder stops when it reaches the beginning of the file. Continue pressing the 0 button to proceed with the review from the end of the previous file. • If the 0 button is kept pressed while the recorder is stopped at the start of the top file, the recorder will fast rewind starting from the end of the last file. Playing Playing
Page: 49
49 3 Playing Playing Playback Through Earphone An earphone can be connected to the EAR jack of the recorder for listening. ➥When the earphone is used, the recorder speaker will be switched-off. ....................................................................................................... Notes • To avoid irritation to the ear, insert the earphone after turning down the volume level. • When you listen with the earphone during playback, do not raise the volume too much. It may cause hearing impairment and decrease in hearing ability. Locating the Beginning of the File Press the 9 button during playback, slow playback, or fast playback. ➥The next file is cued and playback starts at the previously set speed. Press the 0 button during playback, slow playback, or fast playback. ➥The file being played is cued and playback starts at the previously set speed. Press the 0 button 2 times during playback, slow playback or fast playback. ➥The previous file is cued and playback starts at the previously set speed. • If there is an index mark or temp mark (☞ P73) in the middle of the file, the recorder will stop at that location. • If the skip space is set at other than file skip (☞ P50), the recorder will F. Skip (forward skip) or R. Skip (reverse skip) for a set time before playback.
Page: 50
50 3 1While the recorder is stopped or during playback, press the MENU button for 1 second or longer. The menu opens. (☞ P97, 99) 2Press the + or – button to choose [Skip Space]. 3Press the OK or 9 button. The [Skip Space] setup process begins. 4Press the + or – button to choose between [F. Skip] and [R. Skip]. [F. Skip] (forward skip): The recorder forwards a set space and starts playing back. [R. Skip] (reverse skip): The recorder rewinds a set space and starts playing back. 5Press the OK or 9 button. Start setting the space. Set Skip Space Set Skip Space (Skip Space) This function enables you to skip (forward) or reverse skip (rewind) a file being played for a set period. This function is convenient for quickly skipping to another playback position or repeatedly playing back short phrases. 1 2 3 4 5

Question & answers

Have a question about the Olympus DS-71 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus DS-71. Please make sure that you describe your difficulty with the Olympus DS-71 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus DS-71

Name
Email
Reaction

View a manual of the Olympus DS-71 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.