DS-3500

Olympus DS-3500 manual

DS-3500

User manual for the Olympus DS-3500 in Dutch. This PDF manual has 184 pages.

Page: 1
2 EN CS DA DE ES FR NL PL RU SV • Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function and volume before use. • This manual is a basic version. For further details, a complete advanced version of the manual* (PDF format) is available for download at the OLYMPUS website. * Available in English, French or German. • The contents of this document may be changed in the future without advanced notice. Contact our Customer Support Center for the latest information relating to product names and model numbers. • The illustration of the screen and the recorder shown in this manual may differ from the actual product. The utmost care has been taken to ensure the integrity of this document, but if you find a questionable item, error or omission, please contact our Customer Support Center. • Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reason is excluded. Trademarks and registered trademarks • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Macintosh is a trademark of Apple Inc. • Intel is the registered trademark of Intel Corporation. • SD and microSD are the trademarks of SD Card Association. • SDHC and microSDHC are the trademarks of SD Card Association. • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Other product and brand names mentioned herein may be the trademarks or registered trademarks of their respective owners. Introduction EN Safety precautions Before using your new recorder, read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this manual in an easily accessible location for future reference. • The warning symbols indicate important safety related information. To protect yourself and others from personal injury or damage to property, it is essential that you always read the warnings and information provided. Caution for usage environment • To protect the high-precision technology contained in this product, never leave the recorder in the places listed below, no matter if in use or storage: − Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight, beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers. − Near flammable items or explosives. − In wet places, such as bathrooms or in the rain. − In places prone to strong vibrations. • Never drop the recorder or subject it to severe shocks or vibrations. • The recorder may malfunction if it is used in a location where it is subject to a magnetic/ electromagnetic field, radio waves, or high voltage, such as near a TV set, microwave, video game, loud speakers, large monitor unit, TV/radio tower, or transmission towers. In such cases, turn the recorder off and on again before further operation. • Avoid recording or playing back near cellular phones or other wireless equipment, as they may cause interference and noise. If you experience noise, move to another place, or move the recorder further away from such equipment. • Do not use organic solvents such as alcohol and lacquer thinner to clean the unit. Warning regarding data loss: • Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or during repair work. It is recommended to back up and save important content to other media such as a computer hard disk. • Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus, an Olympus authorized service station or any other reason is excluded from the Olympus liability. f Danger If the product is used without observing the information given under this symbol, serious injury or death may result. f Warning If the product is used without observing the information given under this symbol, injury or death may result. f Caution If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result. Convention used in this manual • The word “card” is used to refer to the SD card and microSD card. • The word “ODMS” is used to refer to the Olympus Dictation Management System in Windows environment. • The word “DSS Player” is used to refer to the DSS Player for Mac in Apple Macintosh environment. • This manual shows the English on screen display in the illustrations and explanations. You can select the display language for this recorder. For details, see “Language(Lang)”.
Page: 2
3 EN CS DA DE ES FR NL PL RU SV Handling the recorder f Warning: • Keep the recorder out of the reach of children and infants to prevent the following dangerous situation that could cause serious injury: Always use and store the recorder out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: 1Accidentally swallowing the battery, cards or other small parts. 2Accidentally being injured by the moving parts of the recorder. • Do not disassemble, repair or modify the unit yourself. • Use SD/SDHC, microSD/microSDHC memory cards only. Never use other types of cards. If you accidentally insert another type of card into the recorder, contact an authorized distributor or service center. Do not try to remove the card by force. • Do not operate the unit while operating a vehicle. f Caution: • Stop using the recorder immediately if you notice any unusual odors, noise, or smoke around it. Never remove the battery with bare hands, which may cause a fire or burn your hands. • Do not leave the recorder in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the recorder to catch fire. Do not use the charger or AC adapter if it is covered. This could cause overheating, resulting in fire. • Handle the recorder with care to avoid getting a low-temperature burn. − When the recorder contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: − When used for a long period, the recorder will get hot. If you hold on to the recorder in this state, a low- temperature burn may be caused. − In places subject to extremely cold temperatures, the temperature of the recorder’s body may be lower than the environmental temperature. If possible, wear gloves when handling the recorder in cold temperatures. Battery handling precautions f Danger: • The recorder uses a special lithium ion battery from Olympus. Charge the battery with the specified AC adapter or charger. Do not use any other AC adapters or chargers. • The battery should never be exposed to flame, heated, short- circuited or disassembled. • Never heat or incinerate battery. • Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc. • To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, solder, etc. • If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. f Warning: • Keep batteries dry at all times. • If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them. • Do not use a battery if it is cracked or broken. • Never subject batteries to strong shocks or continuous vibration. • If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the recorder. • If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. • Keep batteries out of the reach of children. • If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor: 1remove the battery immediately while being careful not to burn yourself, and; 2call your dealer or local Olympus representative for service. f Caution: • The bundled/included rechargeable battery is exclusively for use with Olympus digital voice recorder DS-3500. − There is a risk of explosion if the battery is replaced with the incorrect battery type. − Dispose of the used battery following the instructions. − Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations. • Always charge a rechargeable battery when using it for the first time, or if it has not been used for a long period. • Rechargeable batteries have limited lifetime. When the operating time becomes shorter even if the rechargeable battery is fully charged, replace it with a new one. LCD monitor • The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of light may appear on the LCD Monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction. Memory Card f Warning: • Do not touch the card contacts. This may damage the card. • Do not place the card in locations with static electricity. • Store the card in a location that is out of the reach of children. In case of accidental ingestion, consult a physician immediately.
Page: 3
4 EN CS DA DE ES FR NL PL RU SV Getting started Identification of parts Display status indicators (LCD panel) 9 0 & 1 2 3 8 4 5 6 7 $ ! @ % # ^ q =- w ) ( * 1 SD card slot 2 Built-in microphone 3 NEW button 4 REC button 5 STOP button 6 PLAY button 7 REV button 8 ERASE button 9 Record indicator light 0 Display (LCD panel) ! + (Volume) button @ Fast Forward (9) button # OK/MENU button $ Programmable smart (F1,F2,F3) buttons % Rewind (0) button ^ – (Volume) button & Built-in speaker * Battery cover ( Battery cover release button Display in the recording mode Display in the playback mode 1 Current file name 2 Current folder 3 Current file number/Total number of recorded files in the folder 4 Recording elapsed time 5 Remaining memory bar indicator 6 Remaining recording time 7 Level meter indicator 8 Button guide display 9 Recorder status indicator 0 Current playback time ! Index mark indicator @ Playback position bar indicator # Verbal comment indicator $ File length % Recording date and time ^ Main button guide You can display the Main Button Guide by using“Main Button Guide”of the customize functions of ODMS software. & File information area Current file’s information can be displayed by using the“Display” function in the ODMS software. [ ]: SD card [ ]: SD Card lock [ ]: microSD card [ ]: Microphone sensitivity [ ]: Recording mode [ ]: Battery [ ]: VCVA (Variable Control Voice Actuator) [ ]: Pending [ ]: Encryption [ ]: Priority [ ]: File lock [ ]: Author ID [ ]: Work Type [ ]: Option Item Display in the recording mode ) POWER/HOLD switch - EAR (Earphone) jack = MIC (Microphone) jack q USB connector w Docking station connector 0 ! # @ % $ & ^ 1 2 9 4 5 6 7 8 3
Page: 4
5 EN CS DA DE ES FR NL PL RU SV Inserting the battery This recorder uses a lithium ion battery specified by Olympus (LI-42B). Do not use any other type of battery. 1 Lightly press down on the battery cover release button, then open the battery cover, as shown in the illustration below. 1 2 3 2 Insert the battery observing the correct polarity as shown in the illustration, then close the battery cover. • Insert the battery by sliding in direction A while pushing down in direction B. Battery indicator: The battery indicator on the display will decrease as the battery loses power. • When this [ ] indicator appears on the display, charge the battery as soon as possible. When the battery is too weak, [s] and [Battery Low] will appear on the display and the recorder will shut down. Notes: • Turn off the recorder before removing the battery. Removing the battery while the recorder is still in use may cause malfunctions, file corruption or file loss. • Remove the battery if you are not going to use the recorder for an extended period of time. Charging the battery Fully charge the battery (approx. 2 hours 30 minutes) before use. Connect the USB cable to the recorder. Notes: • Charge the battery frequently during the first period of use. The battery will perform better after several charge/discharge cycles. • Models of batteries which are different from the included one may not be charged. • Charging the battery via the USB cable connection may not be successful depending on the power capacity of the USB port in your PC. Use the AC adapter (optional) instead. • Do not charge the recorder through a USB hub. • Do not attach or remove the battery if the USB cable is connected. Using the lithium ion battery The included battery is exclusively for use with the Olympus voice recorder DS-3500. Do not use in combination with other electronic equipment. Cautions concerning the battery: Read the following instructions carefully when you use the battery. Discharging: Rechargeable batteries self-discharge while not in use. Charge it regularly before use. Battery life: Over time, the rechargeable battery may gradually wear down. When the operating time becomes shorter even if the rechargeable battery is fully charged under the specified condition, replace it with a new one. Operating temperature: Rechargeable batteries are chemical products. Battery efficiency may vary even when operating within the recommended temperature range. This is an inherent nature of these products. Recommended temperature range of use: During operation: 0°C - 42°C Charging: 5°C - 35°C Storage for a long period: –20°C - 60°C Using the battery outside the above temperature range may result in declining efficiency and shorter battery life. Notes: • When disposing the batteries, always observe the local laws and regulations. Contact your local recycling center for proper disposal methods. • If battery is not fully discharged, protect it against short-circuiting (e.g. by taping the contacts) before disposal. For customers in Germany: Olympus has a contract with the GRS (Joint Battery Disposal Association) in Germany to ensure environmentally friendly disposal. Power supply from USB cable Use the USB cable when recording for extended period of time. 1 Verify that the recorder is in stop mode. 2 Connect the USB cable to the recorder while pressing the OK/MENU button. • After removing the battery, it may become necessary to re-set the time and date if you leave the battery out of the recorder for more than 15 minutes or if you remove the battery right after loading it into the recorder.
Page: 5
6 EN CS DA DE ES FR NL PL RU SV Turning on/off the power Turning on the power: While the recorder is turned off, slide the POWER/HOLD switch to the direction of the arrow. Memory card This recorder uses two types of memory cards: a microSD card as internal memory, and an SD card as additional memory. You can remove the content recorded in both the cards safely in case of malfunction of the recorder. Compatible cards The recorder supports memory card capacity from 512 MB up to 32 GB. Cards compatibility For a list of card compatible with the recorder, please visit the product homepage at the Olympus website Card recognition After inserting SD card, the message [Please Wait] will flash on the display while the recorder recognizes the SD card. Detecting abnormal voltage: If the recorder detects a DC power voltage outside the allowed voltage range (4.4-5.5V), then [Power Supply Error Remove Power Plug] will appear on the display, and all operation will stop. The recorder will not be operable if abnormal voltage is detected. Use an AC adapter compatible with the voltage standard of your environment (optional). Turning off the power: Slide the POWER/HOLD switch to the direction of the arrow, and hold it for 0.5 seconds or longer. applicable to your region or contact your Olympus reseller where you purchased the product. Notes: • When initializing (formatting) a card, confirm that no necessary data is stored on the memory card beforehand. Initialization completely erases the existing data on the card. • Cards formatted (initialized) by another device, like a computer, may not be recognized. Be sure to format them with this recorder before use. • The card has a service life. When reaching the end of its life, writing or erasing data on the card will be disabled. In this case, replace the card. • If you use a PC card adapter compatible with the card to save or delete some data on the card, the maximum recording time on the card may be decreased. To recover the original recording time, initialize/format the card in the recorder. Inserting and ejecting a SD card Inserting a SD card: Insert the SD card fully into the card slot with the card facing the direction shown in the illustration below, until it clicks into place. • Insert the card keeping it straight. HOLD If you set the recorder to HOLD mode, the running conditions will be preserved, and all buttons will be disabled. Set the recorder to HOLD mode: Slide the POWER/HOLD switch to the [HOLD] position. After the recorder is set to HOLD mode, the [Hold] message will be displayed. Exit HOLD mode: Slide the POWER/HOLD switch to the A position. A Notes: • If any button is pressed during HOLD mode, the clock will be displayed for 2 seconds, but the recorder will not be operable. • If HOLD mode is entered during playback or recording mode, the recorder will not be operable but the playback/recording will continue (When playback has ended or the recording has ended due to the remaining memory being used up, it will stop).
Page: 6
7 EN CS DA DE ES FR NL PL RU SV Setting time and date [Time & Date] If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management. When you use the recorder for the first time after purchasing it, or when the battery has been inserted without the device being used for a long time, the [Set Time & Date] will appear. • For further details, a complete advanced version of the manual* (PDF format) is available for download at the OLYMPUS website. * Available in English, French or German. Ejecting a SD card: Push the SD card inward to unlock it and let it come out of the slot. • Hold the card straight and pull it out. Notes • Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam. • If the card is not inserted all the way into the slot, data may not be written properly. • When an unformatted card is inserted into the card slot, the recorder will automatically display the format menu options. • Use only cards formatted with the recorder. • Never remove the card while the recorder is operating, as this may damage the data. • After pushing the card inward to eject it, releasing your finger too quickly may cause the card to be ejected unexpectedly. • This recorder uses a microSD card as internal memory. The microSD card has been preloaded. • The recorder may not properly recognize the card even when that card is compatible with it. • The processing performance reduces in a card when you repeat writing and deleting. In this case, format the card. 1 Press the 9 or 0 button to select the item to set. Select the item from the“hour”, “minute”,“year”,“month”and“day” with a flashing point. Basic operations Recording By default, the recorder has five folders, [A], [B], [C], [D], [E] and you can select a folder by pressing the F1 (FOLDER) button. These five folders can be selectively used to distinguish the kind of recording. Up to 200 messages can be recorded per folder. Also, by default, the Recording Mode is [DSS Pro QP]. Record function* Before starting recording over a previously recorded file, the RECORD function can be set to the following: • Append: Attaches the new recording to the end of the previously recorded file. • Overwrite (default): Overwrites and deletes part of the previously recorded file starting from the chosen position. • Insert: The recorded file will be inserted in the middle of the previously recorded file, starting from the chosen recording position. The original file will be kept. By default, the RECORD function is configured to record using the overwrite option. Recording will start from the current position of the existing file. * This function will not be available if an MP3 file has been selected. New recording Create a new file to record in. 1 Press the NEW button to create a new file. • It is possible to select the Work Type from the work type list uploaded using the ODMS software. 3 Press the + or − button to select [Time & Date]. 2 Press the + or − button to set. You can select between 12 and 24 hour display by pressing the F2 (24H) button while setting the hour and minute. • You can select the order of the “Month”,“Day”and“Year”by pressing the F2 (D/M/Y) button while setting them. 3 Press the OK/MENU button to complete the setting. Note: • You can set the time and date from your PC using ODMS and DSS Player software. Changing the time and date: If the current time and date is not correct, set it using the procedure below. 1 While the recorder is in stop mode, press the OK/MENU button. 2 Press the 9 or 0 button to select [Device Menu] tab. • You can change the menu display by moving the settings tab cursor. 4 Press the OK/MENU button. • The following steps are the same as Step 1 through Step 3 of“Setting time and date [Time & Date]”. 5 Press the F3 (EXIT) button to close the menu screen.
Page: 7
8 EN CS DA DE ES FR NL PL RU SV − Delete unnecessary files before recording any further or transfer dictation files to your PC. − Change the recording media at [Card Select] setting or change to a card with free space. b a 3 Press the REC button to start inserting the additional recording. • The record indicator light turns on. [Insert Rec] and the remaining recording time will alternate on the display. 4 Press the STOP button to stop inserting the additional recording. Overwrite recording You can overwrite a previously recorded file starting from any point within the file. When using overwriting, the overwritten part will be erased. • This function will not be available if an MP3 file has been selected. 1 Select and play the file you want to overwrite. • Stop the playback at the point you want to start overwriting. 2 Press the REC button to start overwriting. • The record indicator light turns on. a b aNew file number bRemaining recording time 2 Press the REC button to start recording. • The record indicator light turns on. Turn the microphone in the direction of the source to be recorded. 3 Press the STOP button to stop recording. • If you want to append additional recordings to the same file, press the REC button again (This function will not be available if an MP3 file has been selected). Notes: • During recording, a beep will sound whenever the remaining recording time reaches 60, 30, and 10 seconds. • When the remaining recording time is less than 30 minutes, the color of the remaining memory bar indicator will change. • When the remaining recording time reaches 60 seconds, the record indicator light will start flashing. The light will flash faster when the remaining recording time decreases from 30 to 10 seconds. • [Memory Full] or [Folder Full] will be displayed when the memory or folder capacity is full. aRecording elapsed time bTotal recording time of the selected file 3 Press the STOP button to stop overwriting. Note: • You cannot select a recording mode different from the one set onto the original file. Insert recording Additional recording can be inserted into previously recorded file. • This function will not be available if an MP3 file has been selected. 1 Select and play the file you want to insert an additional recording into. 2 While playing the file, press the F1 (INSERT) button to insert an additional recording. • [Insert Rec?] will appear on the display. Notes: • The recording’s time and date will be updated to the one of the latest recording inserted. • You cannot select a recording mode different from the one set onto the original file. Hands-free recording The recorder can be used as a hands- free recording device. To set up the recorder for hands-free operation, connect the optional Olympus Foot Switch to the back of the docking station and place the recorder in the docking station (optional). • For further details, a complete advanced version of the manual* (PDF format) is available for download at the OLYMPUS website. * Available in English, French or German.
Page: 8
9 EN CS DA DE ES FR NL PL RU SV Playback 1 Select the file, then press the PLAY button to start playback. 2 Press the + or – button to adjust the volume. • The volume can be adjusted within a range from [00] to [30]. Recording monitor It is possible to monitor your recording by listening to it even while the recording is in progress. In order to do so, insert the earphone plug into the earphone jack and use the + or – buttons to control the volume level. Play (playback): Playback at normal speed. Slow Play (slow playback): Playback speed slows down (-50%), and“Slow play”will be displayed. Fast Play (fast playback): Playback speed becomes faster (+50%), and“Fast play”will be displayed. Notes: • If you press the 9 button once while fast-forwarding or twice while in stop mode, the recorder will stop at the end of the file (F.Skip). • If you press the 0 button once while rewinding or twice while in stop mode, the recorder will stop at the beginning of the file (B.Skip). If the 0 button is pressed within 2 seconds, the recorder skips to the beginning of the previous file. • If you press and hold the 9 button while fast forwarding (FF), the recorder will continue to skip forward. • If you press and hold the 0 button while rewinding (REW), the recorder will continue to skip backward. • The Cue and Review speed can be set from [Speed1] to [Speed5]. Cue and Review playback sound can be set to [On] or [Off]. Erasing Erasing files: 1 Select the file you want to erase. 2 Press the ERASE button. 3 Press the + button to select [Erase in Folder] or [File Erase]. [Erase in Folder]: All files in a folder can be erased simultaneously. [File Erase]: Erase one file. • [Erase Done] is displayed when the file is erased. File numbers will be reassigned automatically. Notes: • An erased file cannot be restored. • The erasing process may take up to 10 seconds. Do not interrupt this process or data may be damaged. • Files cannot be erased in the following cases. - Files are locked. - Files stored on a locked SD card. Partially erasing a file Any unnecessary part of a file can be erased. 1 Playback the file you would like to partially erase. 2 Press the ERASE button at the point you want to start erasing. • While playback continues, [Erase Start] will appear on the display. • If you press the F2 ( ) button, playback will skip (F.Skip) to the end of the file and then stop. That will be set automatically as the ending point of the partial erase. • If you press the F1 ( ) button, playback will skip back (B. Skip) and restart from the partial erase starting point. 5 Press the + button to select [Start], then press the OK/MENU button. • The display changes to [Erase !] and erasing will start. 3 Press the STOP button at any point you want to stop the playback. Fast Forward (FF): • Press the 9 button once while in stop mode. How to cancel: Press the STOP, PLAY or OK/MENU button. Rewind (REW): • Press the 0 button once while in stop mode. How to cancel: Press the STOP, PLAY or OK/MENU button. Cue (Cue): • Press and hold the 9 button while in stop or playback mode. How to cancel: Release the button. Review (Rev): • Press and hold the 0 button while in stop or playback mode. How to cancel: Release the button. • Press and hold the REV button. How to cancel: Release the button. Playback Speed • Press the F2 (SPEED) button during playback. • The playback speed will change at each press of the F2 (SPEED) button. 4 Press the OK/MENU button.
Page: 9
10 EN CS DA DE ES FR NL PL RU SV Verbal Comment Verbal comments are useful to append vocal instructions while recording. It is possible to search and playback Verbal comments using the ODMS and DSS Player software. Verbal comments are also useful to give instructions to transcriptionists. • Verbal comments can be set on DS2 files only. Setting a Verbal Comment 1 While the recorder is in recording mode, press and hold the F1 (VERBAL) button. • Data recorded while pressing the F1 (VERBAL) button will be recorded as Verbal Comment. Advanced operations Selecting folders and files Changing folders: 1 While the recorder is in stop mode, press the F1 (FOLDER) button. • The folder list screen will be displayed. 2 Press the +, – or F1 (FOLDER) button to select the folder, then press the OK/MENU button. b a Selecting a file: 1 While the file is being displayed, press the 9, 0 button. aTotal number of recorded files in the folder bCurrent file number Displaying file information The recorder can display a variety of information related to the current file. 1 Select the file containing the information to display. 2 Press the F3 (INFO) button. • The following information will be displayed: [Date] [Author ID] [Work Type] Device lock function Access to the recorder can be restricted by using the Device Lock function. Password authentication can be safer for your data in case the recorder is lost. The password can be set by using the ODMS software. Setting the Author ID andWorkType Every file recorded on the recorder will include the Author ID and Work Type as part of its header information. To create multiple Author IDs and Work Types on the recorder, use the bundled ODMS software to create and upload a data list (list of Author IDs and Work Types) to the recorder. For more details, refer to the online help for ODMS software. By default the Author ID is set to “DS3500”. 3 In the position you want to end partial erase, press the ERASE button again. • The erase starting point (time) set in step 2 and the ending point (time) set in this step will be displayed alternatively for 8 seconds. • If you let the playback continue until the end of the file, or in case of a Verbal comment before it, that will be considered the ending point of the partial erase. 4 Press the ERASE button to confirm the erasure. • The display changes to [Partial erasing !] and erasing will start. • When [Partial erase completed.] appears on the display, partial erase is complete. Notes • If the ERASE button is not pressed within 8 seconds after the [Start point] and [End point] are alternately displayed, the recorder will revert to stop status. • An erased file cannot be restored. • The erasing process may take up to 10 seconds. Do not interrupt this process or data may be damaged. • Files cannot be partially erased in the following cases. - MP3 file is selected. - Files are locked. Playback will continue until the end of the file or until the partial erase ending point is confirmed. - Partial erasing is not possible on parts of files with a Verbal comment on them. - Files are inside a locked SD card.
Page: 10
11 EN CS DA DE ES FR NL PL RU SV Index marks Index marks can be placed into a file during recording or playback. Index marks are used to provide a quick and easy way to identify important or significant parts within the file. Setting an index mark 1 While the recorder is in recording mode or in playback mode, press the F3 (INDEX) button. a Locating a Verbal Comment 2 When playing back a file, press and hold the 9 or 0 button. • The recorder stops for 1 second when it reaches the Verbal Comment. • The verbal comment part has a different color. Locating an index mark 2 While playing back a file, press and hold the 9 or 0 button. • The recorder stops for 1 second when it reaches the index mark. Clearing an index mark 1 Select a file in which index marks you want to erase are contained. 2 Press the 9 or 0 button to select the index mark to erase. 3 While the index number appears for approximately 2 seconds on the display, press the ERASE button. • The index mark is erased. Notes: • Up to 32 index marks can be set within a DS2 file. • Up to 16 index marks can be set within MP3 and PCM files. • When a file is locked or set to read- only, or when the SD card is locked, index mark cannot be erased. • If the recorder has been set to DSS Classic mode, index marks are limited to a maximum of 16 for each file. How to use the menu Items in menus are categorized by tabs, so select a tab first and move to a desired item to quickly set it. You can set each menu item as follows. 1,4,6 7 2 3,5 1,4,6 7 2 3,5 2 Press the 9 or 0 button to move to the tab that contains the item you want to set. • You can change the menu display by moving the settings tab cursor. 3 Press the + or − button to move to the item you want to set. • Move to the menu item you want to set. 4 Press the OK/MENU button. • Move to the setting of the selected item. 1 While the recorder is in stop mode, press the OK/MENU button. • The menu will appear on the display. aVerbal Comment part Clearing a Verbal Comment 1 When playing aVerbal Comment, press the ERASE button. 2 Press the + button to select [Clear], then press the OK/MENU button. Notes: • Up to 32 Verbal comments can be set within a file. • When a file is locked or set to read- only, or when the SD card is locked, Verbal comments cannot be erased. • When the recorder has been set to DSS Classic mode, it is not possible to record Verbal Comments.
Page: 11
12 EN CS DA DE ES FR NL PL RU SV Rec Menu Mic Sense: You can switch between two microphone sensitivities to meet recording needs: [Dictation] for oral dictation and [Conference] which is suited for situations like meetings and conferences with a small number of people. [Conference]: High-sensitivity mode that records sounds in all directions. [Dictation]: Low-sensitivity mode suited for dictation. • The setting status will appear on the display as [ ] or [ ]. Rec Mode: You can choose between different recording formats. 1 Select the recording format. [DSS]: DSS stands for Digital Speech Standard, a digital audio file format defined by a cooperative venture by Olympus and two other companies. DSS format files are easily editable and have a very light file size. [PCM ST] (Stereo): This is an uncompressed audio format which is used for music CDs and the like. [MP3]: MPEG is the international standard established by a working group of the ISO (International Organization for Standardization). 2 Select the recording rate. When [DSS] is selected: [DSSProQP] (Quality Playback) or [DSSProSP] (Standard Playback) When [PCM ST] is selected: Recording rate will be fixed at 44.1 kHz/16 bit. When [MP3] is selected: [256 kbps] or [128 kbps] • Since the built-in microphone is monaural, even if you enable [PCM ST] in [Rec Mode] the sound recorded through the built-in microphone will be monaural. In order to do stereo recording, an external stereo microphone will be necessary (optional). • You cannot select the [DSS Pro QP] mode when setting the recorder to the DSS Classic mode. For details, see “Recording” in the “Customizing the recorder”. VCVA: The VCVA feature extends recording time and conserves memory by stopping recording during silent periods, which helps the playback to be more efficient. When the microphone senses that sounds have reached a preset threshold volume level, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when the volume drops below the threshold level. 1 Select [On]. 2 Press the REC button to start recording. • When the sound volume is lower than the preset actuation sound level, recording automatically stops after 1 second approximately, and [Standby] flashes on the display. The record indicator light turns on when recording starts and flashes when recording pauses. Work Type: The Work Type information of the recorded or uploaded files can be edited with the menu settings of the recorder. • For further details, a complete advanced version of the manual* (PDF format) is available for download at the OLYMPUS website. * Available in English, French or German. Information: The recorder can display a variety of information related to the current file. aVCVA indicator bLevel meter (varies according to the sound volume being recorded) a b 5 Press the + or – button to change the setting. • Pressing the 0 button without pressing the OK/MENU button will cancel the settings and return you to the previous screen. 6 Press the OK/MENU button to complete the setting. • You will be informed that the settings have been established via the screen. 7 Press the F3 (EXIT) button to close the menu screen. Menu items File Menu Priority: By default, the F2 button is programmed with the Priority function. The setting can also be performed from the menu. You can set a priority level on each file recorded. You can select“High”or “Normal”. The default is Normal level. [Set]: High level. [Cancel]: Normal level. • Each time the F2 (PRIORITY) button is pressed the Priority level will change (High/Normal). Pending: When you set [Pending] to the file, the file becomes“Pending file”. If “Download file”is set to“Finished file” by ODMS software, the [Pending] file is not transferred and only [Finished] file (edited file) will be transferred to your PC. [Pending]: Sets to a file of“Editing”and [ ] will appear on the display. [Finished]: Sets to a file of“already edited”. File Lock: The File lock function allows you to prevent important files from being accidentally erased. [On]: Locks the file and prevents it from being erased. [ ] will appear on the display. [Off]: Unlocks the file and allows it to be erased.
Page: 12
13 EN CS DA DE ES FR NL PL RU SV LCD/Sound Menu Backlight: By default, the display will remain lit for about 10 seconds when a button on the recorder is pressed. 1 Select [Lighting Time], [Dim Light Time] or [Brightness]. 2 Select the options. When [Lighting Time] is selected: [5seconds] [10seconds] [30seconds] [1minute]: Set the backlight duration. When [Dim Light Time] is selected: [30seconds] [1minute] [2minutes] [5minutes] [Always On]: Set the time after which the backlight dims. c Adjust the start/stop actuation level: While the recorder is in recording mode, press the 9 or 0 button to adjust the actuation level. • The VCVA level can be set to any of 15 different values. • The higher the value is, the more sensitive the recorder can react to sounds. At the highest value, even the faintest sound will activate recording. • The VCVA actuation level can be adjusted according to the ambient (background) noise. CStart level (moves to the right/ left according to the set level) • The start/stop actuation level also varies depending on the selected microphone sensitivity mode. • To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. Device Menu Card Select: By default, the recording media is set to [SD Card] by the manufacturer. • The recording media ([ ] or [ ]) will appear on the display. Cue/Rev: The playback sound of Cue and Review operation and Cue and Review speed can be set. 1 Select [Sound] or [Speed]. [Sound]: Set the playback sound of Cue and Review to On or Off. [Speed]: Set the Cue and Review speed. 2 Select the options. When [Sound] is selected: [On]: Activate the playback sound of Cue and Review. [Off]: Disables this function. When [Speed] is selected: You can adjust the Cue and Review speed level from [Speed 1] to [Speed 5]. • Cue and Review speed level becomes faster as the numerical value becomes larger. Power Save: By default, the recorder will enter into Power Save mode if not used for more than 10 minutes. [5minutes] [10minutes] [30minutes] [1hour]: Set the length of time before the recorder will enter into Power Save mode. [Off]: Disables this function. • If any button is pressed, time count will restart. Time & Date: Setting the time and date beforehand enables easier file management. For details, see“Setting time and date [Time & Date]”. USB Class: You can set the USB class of this recorder with a USB connection to [Composite] or [Storage Class]. [Composite]: In the 3 classes of Storage, USB audio and human interface device, USB connection is possible. While connected via USB in [Composite], the recorder can be used as the USB speaker and the USB microphone in addition to storage class. [Storage Class]: USB connection is possible in only storage class. Reset Settings: To reset the menu settings to their default values use [Reset Settings] under [Device Menu], or use the ODMS and DSS Player software. Format: Cards that have been used in non- Olympus devices, or cards that are not recognized by the recorder, must be formatted before they can be used with the recorder. • Formatting the card will erase all the stored data, including locked files. For details, see“Formatting the card [Format]”. When [Brightness] is selected: [01] [02] [03]: Sets the brightness of the backlight when lit. LED: You can set it so the record indicator light does not turn on. [On]: LED light will be set. [Off]: LED light will be canceled. Beep: When the Beep is set to [On], the recorder will beep in case of error. [On]: Beep is enabled. [Off]: Beep is disabled. Language (Lang): You can set the language for the recorder’s user interface. [Čeština] [Dansk] [Deutsch] [English] [Español] [Français] [Nederlands] [Polski] [Русский] [Svenska]: • The languages available may vary depending on the country/region where the product is purchased.
Page: 13
14 EN CS DA DE ES FR NL PL RU SV Customizing the recorder You can customize various settings of the recorder using the ODMS software. For more details, refer to the online help for ODMS software. Common settings: You can set the default values for each of the recorder’s Menu items. 3 Press the + or – button to select [Start] option. 2 Press the + or – button to select [SD Card] or [microSD Card], then press the OK/MENU button. 4 Press the OK/MENU button to confirm [Start] selection. 5 Press the + or – button again to select [Start] option. 6 Press the OK/MENU button again to initiate the formatting process. • [Format Done] displays when formatting ends. Notes: • The time required to format a card varies according to the capacity of the card to be formatted. Do not interrupt the formatting process with the following actions. Doing so may damage the data or the card. - Remove the card. - Remove the battery. • Formatting the card will erase all the stored data, including locked files. • When an unformatted card is inserted, the format menu will be displayed automatically. • Locked SD cards cannot be initialized. • Memory cards will be formatted using quick format. Formatting the card will reset the information in file management, but the data inside the card may not be deleted completely. Be careful of data leakage when disposing or handing of the card. We recommend that you physically destroy the card when disposing of it. Formatting the card [Format] Cards that have been used in non- Olympus devices, or cards that are not recognized by the recorder, must be formatted before they can be used with the recorder. 1 Select [Format] at the [Device Menu] screen, then press the OK/MENU button. Card Information: Memory card capacity and remaining card space for the cards in use will be displayed on the recorder. System Information: System information about the recorder like the [Model], [Version] and [Serial No.] can be displayed. • For further details, a complete advanced version of the manual* (PDF format) is available for download at the OLYMPUS website. * Available in English, French or German. Administrative settings: ❏ General Accessibility: • You can customize / adjust / set / configure various settings related to user authorization, such as prohibiting both file erasure and Menu settings. Splash Message: • You can set the contents that appear in the message which is displayed during start-up. Main Button Guide: • You can enable the Main Button Guide, which shows the button functions on the display. Alarm: • You can set occasions for the recorder’s alarm or beep noise to sound. ❏ Display • You can select a default pattern for display from 4 patterns. • The way information is displayed on the LCD display can be customized for three different areas. – The upper part of the screen displays the recorder's basic functions. − The lower part of the screen can be used to display information on the file actually selected, like Author ID, Work Type and Option Item. − The right part of the screen can be used to display the Main Button Guide indicators. ❏ Device Security You can customize / adjust / set / configure various settings related to the recorder’s device lock function. PIN code: • Password setting. Device Lock: • Device lock function On/Off. • Settings related to the timing for setting the device lock. • Changing the number of allowable input errors (mismatches) for the password. ❏ Author List You can customize / adjust / set / configure settings related to the Author.
Page: 14
15 EN CS DA DE ES FR NL PL RU SV Author List: • Register multiple Author IDs (up to max. 10 items). • Set the priority level for each Author ID. • Select the Author ID you want to be used by default. Author Selection: • Choose to activate/deactivate the Author ID selection at the recorder start-up. ❏ Work Type List You can customize / adjust / set / configure settings related to the Work Type. Work Type List: • Register Work Types (up to max. 20 items). • Set the option items for each Work Type (up to max.10 options). • Select the Work Type you want to be used by default. Worktype Selection: • Choose to activate/deactivate the Work Type selection when the recorder is iv New mode. ❏ Device Folders You can customize / adjust / set / configure various settings related to the recorder’s folders. Enabled: • Change the number of usable folders. Folder name: • Change the folder name. Worktype: • Set the folder's work type. AutoLock: • Set the Auto Lock on a file to On/Off. Encryption: • Select a folder’s Encryption level. It is possible to set the Encryption level to [High] (256 bit), [Standard] (128 bit) or [No] (deactivates the function). Password: • Set the folder's Encryption Password. ❏ Recording You can customize / adjust / set / configure various settings related to the recorder’s Dictation files. DSS Format: • Select the recording format (DSS Pro/DSS Classic). Record function: • Select the recording mode (Overwrite/Append/Insert). File download: • Select the files you want to be transferred to the PC (All file/ Finished file). ❏ Programmable Buttons You can change the functions assigned to the Programmable Smart Buttons (F1, F2, F3 buttons) and the Main Buttons (NEW, REC, STOP, PLAY, REV buttons). You can also choose how to operate the REC button when recording. Main Button functions: • Select a combination of functions. Programmable Buttons: • Select the function to associate to the Programmable buttons (F1, F2, F3 buttons) for each mode (New, Stop, Recording, Playback mode). Rec Mode: • You can choose to record by pressing and holding the REC button. Choose [Yes] to activate this function. ❏ Hands Free You can customize / adjust / set / configure settings related to the Hands-Free operation with the Foot Switch (optional). Managing files on your PC ODMS and DSS Player software The ODMS (Windows) and DSS Player (Macintosh) software is a fully featured software tool that provides a simple to use but sophisticated method for managing your recordings. Some of the features of the ODMS and DSS Player software are: • Customize functions on the recorder (ODMS only). • Automatic start-up of the application by connecting the device. • Automatic download of Dictation files by connecting the device. • Backs up downloaded Dictation files (ODMS only). • Automatic transmission of downloaded Dictation files to addresses specified through e-mail and FTP (ODMS only). • Automatic transmission of transcribed documents through e-mail and FTP, as well as Dictation files and link management (ODMS only). • Change the recorder’s menu settings. • Direct recording and editing of existing Dictation files through Voice recorder’s button operation. • Editing Instruction Comments and Verbal comments (ODMS only). • Encrypt Dictation files within the folder by encrypting the folder itself (ODMS only). • Support front and background voice recognition local and roaming profile (ODMS only). • Allow voice recognition text editing with audio playback for efficient transcription (ODMS only). Make sure that your computer meets the minimum requirements listed below. Please check with your system administrator or your Olympus Professional Dealer. Minimum requirement ODMS software (Windows) Operating System: For Stand-Alone: Microsoft® Windows® XP: Professional / Home Edition SP3 x86 Professional / Home Edition SP2 x64 Microsoft® Windows Vista®: Ultimate / Enterprise / Business / Home Premium / Home Basic SP2 (both x86/64) Microsoft® Windows 7®: Ultimate / Enterprise / Professional / Home Premium (both x86/64) For Workgroup: Microsoft® Windows® XP: Professional SP3 x86 Professional SP2 x64 Microsoft® Windows Vista®: Ultimate / Enterprise / Business SP2 (both x86/64) Microsoft® Windows 7®: Ultimate / Enterprise / Professional (both x86/64)
Page: 15
16 EN CS DA DE ES FR NL PL RU SV Other information Troubleshooting Symptom Probable cause Action Nothing appears on the display The battery power is low. Charge the battery. The recorder is turned off. Turn the power on. The recorder is currently in Power Save mode. Press any button. Unable to use any buttons The recorder is in HOLD mode. Release the recorder from HOLD. Unable to record The card does not have enough memory. Erase unnecessary files or insert another card. The card is unformatted. Format the card. The maximum number of files has been reached. Change to any other folder. The file is locked. Unlock the file from the file menu. The SD card is locked. Unlock the SD card. No playback tone heard The earphone is connected. Unplug the earphones to use the internal speaker. The volume level is set to [00]. Adjust the volume level. Browser: Microsoft Internet Explorer 6.0 or later Drive: CD-ROM, CD-R, CD-RW, DVD-ROM drive Display: 1024 x 768 pixels or more, 65,536 colors or more (16,770,000 colors or more is recommended) USB port: One or more free ports Others: With the Dictation Module, Transcription Module: A Microsoft WDM- or MME- compliant and Windows- compatible sound device DSS Player software (Macintosh) Operating System: Mac OS X 10.4.11 - 10.7 CPU: PowerPC® G3 500 MHz or more, or Intel Core Solo/Duo 1.5 GHz or more RAM: 256 MB or more (512 MB or more is recommended) Hard drive space: 200 MB or more Drive: CD-ROM, CD-R, CD-RW, DVD-ROM drive Browser: Macintosh Safari 3.0.4 or later, mozilla Firefox 3.6.20 or later Display: 1024 x 768 pixels or more, 32,000 colors or more USB port: One or more free ports Others: • Audio device Notes: • Even if the above conditions are satisfied, self-modified computers, self-upgraded OS or multiple OS environments are not supported. • Macintosh version does not support voice recognition software. • For information on the latest OS upgrades compatibility, visit the Olympus Web page at http://www.olympus-global. com/en/global/. Microsoft® Windows® Server 2003 SP2 (both x86/64) Microsoft® Windows® Server 2003 R2 SP2 (both x86/64) Microsoft® Windows® Server 2008 SP2 (both x86/64) Microsoft® Windows® Server 2008 R2 (both x86/64) CPU: Microsoft® Windows® XP / Vista / 7: 1 GHz or higher Microsoft® Windows® Server 2003: 1 GHz or higher Microsoft® Windows® Server 2008: 2 GHz or higher RAM: Microsoft® Windows® XP: 256 MB or more Microsoft® Windows Vista®: 1 GB or more Microsoft® Windows 7®: 1 GB or more (32 bit) / 2 GB or more (64 bit) Microsoft® Windows® Server 2003: 256 MB or more Microsoft® Windows® Server 2008: 2 GB or more Hard drive space: 2 GB or more
Page: 16
17 EN CS DA DE ES FR NL PL RU SV Symptom Probable cause Action Unable to erase The file is locked. Unlock the file from the file menu. The SD card is locked. Unlock the SD card. Noise heard during playback The recorder was shaken during recording. — — — The recorder was placed near a cell phone or fluorescent lamp while recording or during playback. Avoid using the recorder near cell phones or fluorescent lamps. Recording level too low The microphone sensitivity is too low. Set the microphone sensitivity to the conference mode and try again. Unable to set index marks The maximum number of index marks (32) has been reached. Erase unnecessary index marks. The file is locked. Unlock the file from the file menu. The SD card is locked. Unlock the SD card. Unable to set verbal comments The maximum number of verbal comments (32) has been reached. Erase unnecessary verbal comments. Cannot find the recorded file Wrong recording media or folder. Switch to the correct recording media or folder. Cannot find the transferred files The transferred files are either not supported by this recorder or MP3 files recorded on devices other than Olympus recorders. The recorder can recognize only file format supported by this recorder*. Cannot connect to a PC Sometimes a connection cannot be made with some PCs running Windows XP, Vista or 7. You need to change the PC’s USB settings. See ODMS software online help for details. * Supports file formats: DS2 (DSS Pro QP or DSS Pro SP), DSS (QP or SP), MP3 (256kbps or 128 kbps), PCM (44.1 kHz/16 bit) For MP3 files created using other Olympus recorders, support may be extended to other bitrates as well. Accessories (optional) s Noise-cancellation microphone: ME12 (Dictation microphone) Used to get crisp recordings of your own voice by reducing the effects of ambient noise. Recommended to improve the accuracy when using voice- recognition software. s External microphone: ME15 A lavalier omni-directional microphone that clips to clothing. Used to record your own voice or people near you. s PC transcription kit: AS-7000 The AS-7000 transcription kit provides you with a Foot Switch, a headset and ODMS and DSS Player software for easy transcription of DSS recordings. In order to use the AS-7000 transcription kit, the docking station (CR15) will be necessary (optional). s Foot Switch: RS31 Connect to the USB docking station with DS-3500 for hands- free transcription. s Telephone pickup: TP8 Earphone type microphone can be plugged into your ear while phoning. The voice or conversation over the phone can be clearly recorded. s Lithium ion battery: LI-42B This lithium ion rechargeable battery is manufactured by Olympus. It is best paired with the LI-42C battery charger. s AC adapter (5V): A517 In order to charge the battery, the docking station (CR15) will be necessary (optional). s Docking Station: CR15
Page: 17
18 EN CS DA DE ES FR NL PL RU SV Specifications General points: 4 Recording format: DS2 (Digital Speech Standard Pro) Linear PCM (Pulse Code Modulation) MP3 (MPEG-1 Audio Layer3) 4 Recording media: microSD, SD card (512 MB to 32 GB) 4 Sampling frequency: DS2 format: [DSS Pro QP] 16 kHz [DSS Pro SP] 12 kHz Linear PCM format: [PCM ST] 44.1 kHz MP3 format: [256kbps] 44.1 kHz [128kbps] 44.1 kHz 4 Speaker: Built-in ø23 mm round dynamic speaker 4 MIC/EAR jack: ø3.5 mm mini-jack, impedance MIC 2 kΩ, EAR 8 Ω or more 4 Maximum working output (DC 3.7 V): 235 mW (8 Ω speaker) 4 Maximum headphone output: â 150 mV (according to EN 50332-2) 4 Input power requirement: Battery: Lithium ion battery (LI-42B) External power supply: AC adapter (A517) 5 V (optional) 4 External dimensions: 114.5 mm × 49.8 mm × 17.5 mm (without protrusions) 4 Weight: 107 g (Including battery) 4 Operating temperature: 0°C - 42°C Overall frequency response 4 During recording mode (Microphone jack): DS2 format: [DSS Pro QP] 200 Hz to 7 kHz [DSS Pro SP] 200 Hz to 5 kHz Linear PCM format: [PCM ST] 50 Hz to 21 kHz MP3 format: [256kbps] 50 Hz to 20 kHz [128kbps] 50 Hz to 17 kHz 4 During recording mode (Built-in microphone): 20 Hz to 20 kHz (However, when recording in the MP3 format, the upper limit value of the frequency response depends on each recording mode) Guide to battery life The following values are strictly references. 4 During recording mode (Built-in microphone): DS2 format: [DSS Pro QP] Approx. 18 h. [DSS Pro SP] Approx. 21 h. Linear PCM format: [PCM ST] Approx. 20 h. MP3 format: [256kbps] Approx. 20 h. [128kbps] Approx. 20 h. 30 min. 4 During playback mode (Earphone playback): DS2 format: [DSS Pro QP] Approx. 21 h. [DSS Pro SP] Approx. 21 h. Linear PCM format: [PCM ST] Approx. 19 h. MP3 format: [256kbps] Approx. 19 h. [128kbps] Approx. 20 h. Guide to recording times: The following values are strictly references. 4 DS2 format: Memory size [DSS Pro QP] [DSS Pro SP] 2GB 149 h. 306 h. 4GB 300 h. 615 h. 8GB 604 h. 1,237 h. Specifications and design are subject to change without notice. Battery life is measured by Olympus. It varies greatly according to the conditions of use. 4 Linear PCM format: Memory size [PCM ST] 2GB 3 h. 4GB 6 h. 8GB 12 h. 5 min. 4 MP3 format: Memory size [256kbps] [128kbps] 2GB 16 h. 30 min. 33 h. 4GB 33 h. 66 h. 30 min. 8GB 66 h. 30 min. 133 h. • The above are the standard times, and the available recording time will vary depending on the card. • Available recording time may be shorter if many short recordings are made. Maximum recording time per file: • The maximum capacity for a single file is limited to approx. 4 GB for MP3. • Regardless of the remaining memory amount, the longest sound recording time per file is restricted to the following value. 4 DS2 format: [DSS Pro QP] 99 h. 59 min. [DSS Pro SP] 99 h. 59 min. 4 Linear PCM format: [PCM ST] Approx. 3 h. 20 min. 4 MP3 format: [256kbps] Approx. 37 h. 10 min. [128kbps] Approx. 74 h. 30 min.
Page: 18
19 EN CS DA DE ES FR NL PL RU SV Technical assistance and support The DS-3500 is part of the Olympus Professional Dictation System. Your certified professional dealer has been fully trained on the entire Olympus Professional Dictation range, including dictation, transcription devices and software. For technical assistance and guidance relating to installation and set up, please contact your professional dealer from whom you purchased the system. For customers in Europe: “CE”mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. This symbol [crossed- out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. Applicable Product: DS-3500 This symbol [crossed- out wheeled bin Directive 2006/66/EC Annex II] indicates separate collection of waste batteries in the EU countries. Please do not throw the batteries into the domestic refuse. Please use the return and collection systems available in your country for the disposal of the waste batteries.
Page: 19
183 Olympus Service Department OLYMPUS IMAGING & AUDIO KeyMed House, Stock Road, Southend-on-Sea, Essex, SS2 5QH, United Kingdom Sales: 0800 111 4777 Service: 0800 111 4888 Facsimile: +44 (0)1702445134 email: consumer@olympus.co.uk http://www.olympus.co.uk OLYMPUS CZECH GROUP S.R.O. Evropska 176, 160 41 Praha 6 info-linka pro technicke dotazy: +420 800 167 777 http://www.olympus.cz OLYMPUS DANMARK A/S Tempovej 48-50, 2750 Ballerup Tlf.: +45 44 73 47 00 OLYMPUS DEUTSCHLAND GMBH Wendenstr. 14-18, D-20097 Hamburg Tel.: (040) 237730 Versandadresse Reparaturen: Olympus Deutschland GmbH Bredowstrasse 20, 22113 Hamburg Tel.: (040) 23773 4121 OLYMPUS ESPAÑA S.A.U. Domenico Scarlatti , 11 28003 Madrid Tf.: 902.444.104, Fax.: 91.343.19.17 OLYMPUS FRANCE CENTRE TECHNIQUE Parc d’Affaires Silic, 55, rue de Monthléry 94533 Rungis Cedex Service clients Tél.: 0810 223 223 E-mail: serviceclient.gp@olympus.fr OLYMPUS NEDERLAND B.V. Industrieweg 44, 2382 NW Zoeterwoude Tel.: 0031 (0)71-5821888 http://www.olympus.nl OLYMPUS BELGIUM N.V. Boomsesteenweg 77, 2630 Aartselaar Tel.: (03) 870 99 99 OLYMPUS POLSKA SP. Z O.O. – BIURO Olympus Polska sp. z o.o. ul. Suwak 3, 02-676 Warszawa Tel.: (22) 366 00 77, Faks: (22) 831 04 53 NAPRAWA PRODUKTOW OLYMPUS Informacje dotyczące obsługi napraw gwarancyjnych i pogwarancyjnych Olympus Polska udziela w dni powszednie w godzinach 8:30–16:30ul. Suwak 3, 02-676 Warszawa Tel.: (22) 366 00 66, Faks: (22) 831 04 53 E-mail: serwis@olympus.pl Internet: www.olympus.pl ООО «ОЛИМПУС РУС» г. Москва ул. Электрозаводская, д. 27, стр. 8 тел.: +7 495 926 70 71 http://www.olympus.com.ru OLYMPUS SVERIGE AB Box 1816, 171 23 SOLNA Tel.: 08 735 34 00
Page: 20
E1-BS0846-01 AP1202 OLYMPUS IMAGING CORP. Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan. Tel. +81 (0)3-3340-2111 http://www.olympus.com OLYMPUS EUROPA HOLDING GMBH (Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. +49 (0)40-237730 (Letters) Postfach 10 49 08. 20034 Hamburg, Germany. http://www.olympus-europa.com OLYMPUS IMAGING AUSTRALIA PTY LTD. 82 Waterloo Rd, North Ryde NSW 2113, Australia TEL: (61) 2-9886-3999 http://www.olympus.com.au

Question & answers

Have a question about the Olympus DS-3500 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus DS-3500. Please make sure that you describe your difficulty with the Olympus DS-3500 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus DS-3500

Name
Email
Reaction

View a manual of the Olympus DS-3500 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Voice Recorders
  • Model/name: DS-3500
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Swedish, Danish, Polish, Russian