Olympus D-755 manual

User manual for the Olympus D-755 in English. This PDF manual has 77 pages.

Page: 1
Instruction Manual VR-360/D-760 VR-360/D-760 VR-350/D-755 VR-350/D-755 VR-340/D-750 VR-340/D-750 DIGITAL CAMERA ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specifi ed, the explanation about these illustrations is provided for VR-360/D-760.
Page: 2
2 EN Other accessories not shown: warranty card Contents may vary depending on purchase location. Checking the contents of the box Checking the contents of the box LI-50B Lithium Ion Battery USB cable (CB-USB7) OLYMPUS Setup CD-ROM Strap AV cable (CB-AVC5) F-2AC USB-AC adapter or Digital camera Camera unit 5 6 2 1 3 4 11 12 10 8 7 9 1 Connector cover*1 2 HDMI mini connector*1 3 Strap eyelet 4 Multi-connector 5 Battery/card compartment cover 6 Battery/card compartment lock 7 Flash 8 Self-timer lamp AF illuminator 9 Lens 10Microphone 11 Tripod socket 12Speaker Names of Parts Names of Parts *1 VR-360/D-760 only
Page: 3
3 EN 3 2 1 4 7 5 6 8 10 9 11 1 n button 2 Shutter button 3 Monitor 4 Zoom lever 5 R button (shooting movies) 6 q button (switch between shooting and playback) 7 Indicator lamp 8 Arrow pad INFO button (change information display)  button (erase) 9 Q button (OK) 10E button (camera guide) 11  button Attaching the camera strap Attaching the camera strap Pull the strap tight so that it does not come loose.
Page: 4
4 EN Monitor Shooting mode display Shooting mode display F3.0 F3.0 1/100 1/100 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M z z P P 0:00:34 0:00:34 Date 4 4 NORM 1 2 3 4 5 6 7 8 9 10 15 17 18 19 16 11 14 13 20 21 22 23 24 12 1 Shooting mode ....... p.16, 24 2 Flash..............................p.19 Flash standby/flash charge .................................... p.55 3 Macro ........................... p.30 4 Self-timer...................... p.30 5 Exposure compensation .................................... p.31 6 White balance............... p.31 7 ISO ............................... p.32 8 Drive............................. p.32 9 Image size (still images)................ p.33 10 Recording with sound (movies)...................... p.36 11 Image size (movies) ..... p.34 12 Recording length (movies)...................... p.63 13 Movie recording icon .... p.17 14 World time .................... p.48 15 Image Stabilizer (still images)................ p.35 16 Date stamp................... p.37 17 Compression (still images)................ p.34 18 Number of storable pictures (still images)................ p.16 19 Current memory ........... p.61 20 Battery check................ p.12 21 AF target mark.............. p.17 22 Aperture value.............. p.17 23 Shutter speed............... p.17 24 Camera shake warning
Page: 5
5 EN Playback mode display Playback mode display ● Normal display 1 Battery check................ p.12 2 3D image*1 .................... p.23 3 Eye-Fi transferred......... p.42 4 Protect.......................... p.41 5 Adding sound ............... p.39 6 Print reservation/number of prints...................p.53/p.52 7 Current memory ........... p.61 8 Frame number/ total number of images .................................... p.20 Elapsed time/ total shooting time (movies)...................... p.21 9 P ............................ p.27 10Shutter speed............... p.17 11 Shooting mode ....... p.16, 24 12ISO ............................... p.32 13Aperture value.............. p.17 14Exposure compensation .................................... p.31 15White balance............... p.31 16File number 17Compression (still images)................ p.34 Frame rate (movies)...................... p.34 18Date and time............... p.15 19Image size.................... p.33 20Volume ......................... p.44 12:30 ’12/02/26 ’12/02/26 12:30 10 10 4/30 4/30 3D 3D 1 8 7 3 2 4 5 6 18 Still image Movie 00:12/00:34 00:12/00:34 1 20 8 ● Detailed display 4/30 4/30 10 10 16M 2.0 2.0 F3.0 F3.0 1/1000 1/1000 100-0004 100-0004 AUTO WB AUTO WB 100 ISO 100 ISO NORM 1 MAGIC MAGIC ’12/02/26 12:30 3D 3D 16M 2.0 2.0 F3.0 F3.0 1/1000 1/1000 100-0004 100-0004 AUTO WB AUTO WB 100 ISO 100 ISO 1 MAGIC MAGIC ’12/02/26 12:30 NORM 3 2 4 5 6 1 8 7 11 10 12 9 13 14 16 18 19 15 17 *1 VR-360/D-760 only
Page: 6
6 EN Camera Settings Camera Settings Using the Direct Buttons Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. H (left) G (down) /  button (erase) (p. 21) F (up) / INFO button (change information display) (p. 19, 22) I (right) Q button Arrow pad Zoom lever (p. 18, 22) Shutter button (p. 17) R button (shooting movies) (p. 17) q button (switch between shooting and playback) (p. 20)  button (p. 9) E button (camera guide) (p. 23)
Page: 7
7 EN The symbols FGHI displayed for image selections and settings indicate that the arrow pad is to be used. NORM ‘12/02/26 12:30 NORM 16M ‘12/02/26 12:30 MENU Sel. Image Back Single Print More 4/30 100-0004 4/30 100-0004 02 26 12 30 : . . MENU 2012 X Back Y/M/D Y M D Time Operation guides displayed on the screen indicate that the  button, Q button, or zoom lever can be used. Sel. Image Erase/Cancel OK MENU (1) 4/30 Operation guide MENU Back MENU On On On Camera Menu 1 Image Stabilizer Reset Reset Compression AF Mode Digital Zoom AF Illuminat. Icon Guide Normal Face/iESP Off Back Operation guide
Page: 8
8 EN Using the Menu Using the Menu Use the menu to change camera settings such as the shooting mode. There may be menus that are unavailable depending on other related settings or the  mode (p. 26). Function menu Function menu Press H during shooting to display the function menu. The function menu is used to choose the shooting mode and provides access to frequently used shooting settings. To select the shooting mode Use HI to select a shooting mode and press the Q button. To select the function menu Use FG to select a menu and use HI to select a menu option. Press the Q button to set the function menu. P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU Program Auto 16M Shooting Function menu Shooting mode P P Selected option Setup menu
Page: 9
9 EN 1 Press the  button. ● The setup menu is displayed. MENU Camera Menu 1 Back Reset Reset On On On Compression AF Mode Digital Zoom Normal Face/iESP Off Image Stabilizer AF Illuminat. Icon Guide 2 Press H to highlight the page tabs. Use FG to select the desired page tab and press I. MENU Settings Menu 2 Pixel Mapping Back Power Save Power Save World Time World Time TV Out Bright English Off X ’12.02.26 12:30 Page tab Pixel Mapping MENU Settings Menu 2 Power Save Power Save World Time World Time TV Out Back Bright English Off X ’12.02.26 12:30 Submenu 1 3 Use FG to select the desired submenu 1 and then press the Q button. Power Save Power Save Off MENU Settings Menu 2 Pixel Mapping Back World Time World Time TV Out Bright English X ’12.02.26 12:30 Power Save Power Save Pixel Mapping MENU Settings Menu 2 Back World Time World Time TV Out X On Off Submenu 2 4 Use FG to select the desired submenu 2 and then press the Q button. ● Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 34 to 49) Power Save Power Save On MENU Settings Menu 2 Pixel Mapping Back World Time World Time TV Out Bright English X ’12.02.26 12:30 5 Press the  button to complete the setting. Setup menu Setup menu Press the  button during shooting or playback to display the setup menu. The setup menu provides access to a variety of camera settings, including options not listed in the function menu, display options, and the time and date.
Page: 10
10 EN Menu Index 1 Shooting mode ...........p.16, 24 P (Program Auto) M (iAUTO) Q (Beauty)  (Scene Mode) P (Magic Filter) ~ (Panorama) 2 Flash.................................p.19 3 Macro ...............................p.30 4 Self-timer..........................p.30 5 Exposure compensation...p.31 6 White balance...................p.31 7 ISO ...................................p.32 8 Drive.................................p.32 9 Image Size .......................p.33 0 K (Camera Menu 1).......p.34 Reset Compression AF Mode Digital Zoom Image Stabilizer AF Illuminat. Icon Guide a K (Camera Menu 2).......p.37 Date Stamp b A (Movie menu)..............p.34 Frame Rate IS Movie Mode R (Movie sound recording) c q (Playback menu) ........p.38 Slideshow Edit Erase Print Order R (Protect) y (Rotate) d d (Settings Menu 1)..........p.42 Memory Format/Format Backup Eye-Fi USB Connection q Power On Keep K Settings Sound Settings e d (Settings Menu 2)..........p.44 Pixel Mapping s (Monitor) TV Out*1 NTSC/PAL*2 Power Save W (Language) X (Date/time) World Time f d (Settings Menu 3)..........p.49 Beauty Settings *1 VR-360/D-760 only *2 VR-350/D-755 and VR-340/D-750 only P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU Program Auto 16M MENU On On On Camera Menu 1 Image Stabilizer Reset Reset Compression AF Mode Digital Zoom AF Illuminat. Icon Guide Normal Face/iESP Off Back 6 7 2 1 5 4 8 9 3 0 a b c d e f
Page: 11
11 EN Preparing the Camera Preparing the Camera Inserting the battery and card 1 1 2 Battery/card compartment cover Battery/card compartment lock 2 Write-protect switch Battery lock knob Insert the battery as illustrated with the C mark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Insert the card straight until it clicks into place. When using the camera, be sure to close the battery/ card compartment cover. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Turn off the camera before opening the battery/card compartment cover. Always use SD/SDHC/SDXC cards or Eye-Fi card with this camera. Do not insert other types of memory cards. “Using the card” (p. 61) Do not touch the contact area of the card directly. This camera can be used without a card by storing images in its internal memory. 2 3 1 1 “Number of storable pictures (still images)/Recording length (movies) in the internal memory and cards” (p. 62) To remove the card To remove the card 2 1 Press the card in until it clicks and comes out slightly, then grab the card and pull it out. Charging the battery with the included USB-AC adapter The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. If you received a plug- in type USB-AC adapter, plug it directly into AC outlet.
Page: 12
12 EN The included USB-AC adapter has been designed to be used for charging and playback. Do not take pictures while the AC adapter is connected to the camera. Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the charging is complete or the playback ends. The battery can be charged while the camera is connected to the computer. Charging time varies depending on the performance of a computer. (There may be cases in which it takes approx. 10 hours.) Connecting the camera Connecting the camera AC outlet USB connector (supplied) Multi-connector or Indicator lamp Indicator lamp Indicator lamp On: Charging Off: Charged The battery is not fully charged at the time of purchase. Before use, be sure to charge the battery until the indicator lamp turns off (up to 4 hours). If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, or USB- AC adapter may not be functioning as expected. When to charge the batteries When to charge the batteries Charge the battery when the error message shown below appears. Flashes in red Battery Empty Setting up using the supplied CD Installation of [ib] computer software using the supplied CD is available on Windows computers only. Windows Windows 1 Insert the supplied CD in a CD-ROM drive.
Page: 13
13 EN Windows XP ● A “Setup” dialog will be displayed. Windows Vista/Windows 7 ● An Autorun dialog will be displayed. Click “OLYMPUS Setup” to display the “Setup” dialog. If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then double-click “Launcher.exe”. If a “User Account Control” dialog is displayed, click “Yes” or “Continue”. 2 Register your Olympus product. ● Click the “Registration” button and follow the on- screen instructions. To register the camera, it must be connected to the computer. “Connecting the camera” (p. 12) If nothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Leave the camera connected to the computer until the battery has charged, then disconnect and reconnect the camera. 3 Install OLYMPUS Viewer 2 and [ib] computer software. ● Check the system requirements before beginning installation. ● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen instructions to install the software. OLYMPUS Viewer 2 Operating System Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7 Processor Pentium 4 1.3 GHz or better RAM 1 GB or more (2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) [ib] Operating System Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7 Processor Pentium 4 1.3 GHz or better (Pentium D 3.0 GHz or better required for movies) RAM 512 MB or more (1 GB or more recommended) (1 GB or more required for movies—2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 65,536 colors (16,770,000 colors recommended) Graphics A minimum of 64 MB video RAM with DirectX 9 or later. * See online help for information on using the software. 4 Install the camera manual. ● Click the “Camera Instruction Manual” button and follow the on-screen instructions.
Page: 14
14 EN Macintosh Macintosh 1 Insert the supplied CD in a CD-ROM drive. ● Double-click the CD (OLYMPUS Setup) icon on the desktop. ● Double-click the “Setup” icon to display the “Setup” dialog. 2 Install OLYMPUS Viewer 2. ● Check the system requirements before beginning installation. ● Click the “OLYMPUS Viewer 2” button and follow the on-screen instructions to install the software. You can register via “Registration” in OLYMPUS Viewer 2 “Help”. OLYMPUS Viewer 2 Operating System Mac OS X v10.4.11–v10.6 Processor Intel Core Solo/Duo 1.5 GHz or better RAM 1 GB or more (2 GB or more recommended) Free Hard Drive Space 1 GB or more Monitor Settings 1024 × 768 pixels or more Minimum 32,000 colors (16,770,000 colors recommended) * Other languages can be selected from the language combo box. For information on using the software, see online help. 3 Copy the camera manual. ● Click the “Camera Instruction Manual” button to open the folder containing the camera manuals. Copy the manual for your language to the computer.
Page: 15
15 EN Language, date, time, and time zone You can choose the language for the menus and messages displayed in the monitor. Also, the date and time set here are saved to image file names, date prints, and other data. 1 Press the n button to turn on the camera. Then, use FGHI to select your language and press the A button. The menus can be used to change the selected language. [W] (Language) (p. 48) 2 Use FG to select the year for [Y] on the date and time setting screen. X MENU Back Y/M/D Y M D Time -- -- -- -- : . . 2012 3 Press I to save the setting for [Y]. X MENU Back Y/M/D Y M D Time -- -- -- -- : . . 2012 4 As in Steps 2 and 3, use FGHI to set [M] (month), [D] (day), [Time] (hours and minutes), and [Y/M/D] (date order), and then press the A button. For a more accurate setting, press the Q button when the time signal hits 00 seconds while setting the minutes. The menus can be used to change the selected date and time. [X] (Date/time) (p. 48) 5 Use HI to select your home time zone and press the Q button. ● Use FG to turn daylight saving time ([Summer]) on or off. MENU Back Summer Seoul Tokyo ’12.02.26 12:30 The menus can be used to change the selected time zone. [World Time] (p. 48)
Page: 16
16 EN Shooting, Viewing, and Erasing Shooting, Viewing, and Erasing Shooting with the optimum aperture value and shutter speed [Program Auto] In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. The default settings of the function are highlighted in . 1 Press the n button to turn on the camera. [Program Auto] indicator P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M 4 4 NORM 0:00:34 0:00:34 Number of storable still pictures (p. 62) Monitor (standby mode screen) If the [Program Auto] indicator is not displayed, press H to display the function menu and then set the shooting mode to P. “Using the Menu” (p. 8) Current shooting mode display P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU Program Auto 16M Press the n button again to turn off the camera. 2 Hold the camera and compose the shot. Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash and the microphone with your fingers, etc.
Page: 17
17 EN 3 Press the shutter button halfway down to focus on the subject. ● When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. ● The camera was unable to focus if the AF target mark flashes red. Try focusing again. P P F3.0 F3.0 1/400 1/400 AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 57) 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Image review screen Press fully To view images during shooting To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button or press the shutter button halfway down. Shooting movies 1 Press the R button to start recording. 0:00 REC REC 0:00 0:00:34 0:00:34 0:00:34 0:00:34 0:00 0:00 REC REC Lights up red when recording Current length Continuous recording length Sound will also be recorded. The shooting mode selected for still photography applies to movies (some shooting modes have no effect). 2 Press the R button again to end recording.
Page: 18
18 EN Using the zoom Turning the zoom lever adjusts the shooting range. W side T side P P P P 5.0 5.0 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M 12.5 12.5 0:00:34 0:00:34 4 4 NORM 0:00:34 0:00:34 4 4 NORM Zoom bar Model No. Optical zoom Digital zoom VR-360/D-760 12.5× 4× VR-350/D-755 10× 4× VR-340/D-750 10× 4× To take larger images [Digital Zoom] To take larger images [Digital Zoom] The type and amount of zoom can be identified from the appearance of the zoom bar. The display differs depending on the options selected for [Digital Zoom] (p. 36) and [Image Size] (p. 33). [Off] selected for [Digital Zoom]: Image size Zoom bar 16M Optical zoom range Other Image zoomed and cropped.*1 [On] selected for [Digital Zoom]: Image size Zoom bar 16M Digital zoom range Other Image zoomed and cropped.*1 Digital zoom range *1 If an image size is less than the full resolution after reaching the maximum optical zoom, the camera will automatically resize and crop the image to the selected image size and enter the digital zoom range if [Digital Zoom] is [On]. Photographs taken with the zoom bar displayed in red may appear “grainy.”
Page: 19
19 EN Using the flash The flash functions can be selected to best match the shooting conditions. 1 Select the flash option in the shooting function menu. P P 0.0 0.0 MENU MENU AUTO WB AUTO WB AUTO ISO AUTO ISO Flash Auto 16M 2 Use HI to select the setting option, and press the Q button to set. Option Description Flash Auto The flash fires automatically in low- light or backlight conditions. Redeye Pre-flashes are emitted to reduce the occurrence of red eye in your photos. Fill In The flash fires regardless of the available light. Flash Off The flash does not fire. Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press F (INFO). ● The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 4) P P NORM P P P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M 4 4 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 16M NORM 4 4 0:00:34 0:00:34 0:00:34 0:00:34 Normal Detailed No information
Page: 20
20 EN Viewing images 1 Press the q button. Number of frames/Total number of images 12:30 ’12/02/26 ’12/02/26 12:30 4/30 4/30 Playback image Pictures taken using Q mode are displayed as a group. Turn the zoom lever to the T side to play back the image in the group. 2 Use HI to select an image. Displays previous image Displays next image Hold I to fast forward and hold H to reverse. The display size of the images can be changed. “Index view and close-up view” (p. 22) To play sound recordings To play sound recordings To play sound recorded with an image, select the image and press the Q button. A  icon appears on images with which sound has been recorded. [R] (still images) (p. 39) During audio playback Press FG to adjust volume. To play back movies To play back movies Select a movie, and press the Q button. ’12/02/26 12:30 ’12/02/26 12:30 4/30 4/30 OK Movie Play Movie Play Movie
Page: 21
21 EN Operations during movie playback Operations during movie playback 00:12/00:34 00:12/00:34 During playback Elapsed time/ Total shooting time Pausing and resuming playback Press the Q button to pause playback. To resume playback during pause, fast forward, or rewind, press the Q button. Fast forward Press I to fast forward. Press I again to increase the fast forward speed. Rewind Press H to rewind. The rewinding speed increases each time H is pressed. Adjusting the volume Use FG to adjust the volume. Operations during pausing playback Operations during pausing playback During pause 00:14/00:34 00:14/00:34 Cueing Press F to display the first frame and press G to display the last frame. Advancing and rewinding one frame at a time Press I or H to advance or rewind one frame at a time. Hold I or H pressed for continuous advance or rewind. Resuming playback Press the Q button to resume playback. To stop movie playback To stop movie playback Press the  button. Erasing images during playback (Single image erase) 1 Display the image you want to erase and press G (). MENU Erase Back Erase Cancel 4/30 4/30 2 Press FG to select [Erase], and press the Q button. For erasing multiple images at the same time, see “Erasing images [Erase]” (p. 40). If a group frame is erased, all images in that group are erased collectively. If the group includes images you want to keep, expand the group and protect them respectively.
Page: 22
22 EN Index view and close-up view Index view enables quick selection of a desired image. Close-up view (up to 10× magnification) allows checking of image details. 1 Turn the zoom lever. 12:30 ’12/02/26 ’12/02/26 12:30 4/30 4/30 12:30 ’12/02/26 ’12/02/26 12:30 4/30 4/30 W T W T ’12/02/26 12:30 Index view Single-image view Close-up view To select an image in index view To select an image in index view Use FGHI to select an image, and press the Q button to display the selected image in single-image view. To scroll an image in close-up view To scroll an image in close-up view Use FGHI to move the viewing area. Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press F (INFO). ● The displayed image information changes in the order shown below each time the button is pressed. ’12/02/26 ’12/02/26 12:30 12:30 4/30 4/30 4/30 4/30 16M 2.0 2.0 F3.0 F3.0 1/1000 1/1000 100-0004 100-0004 AUTO WB AUTO WB 100 ISO 100 ISO 1 MAGIC MAGIC ’12/02/26 12:30 NORM 10 10 3D 3D 10 10 3D 3D Normal Detailed No information
Page: 23
23 EN Playing back 3D images (VR-360/D-760) 3D images shot with this camera can be played back on 3D-compatible devices connected to this camera using an HDMI cable (sold separately). “Shooting 3D images (W mode)” (p. 27) When playing back 3D images, read the warnings in the instruction manual for the 3D-compatible devices carefully. 1 Connect the 3D-compatible device and camera using the HDMI cable. For the connection and setting method, see “Using an HDMI cable” (p. 46). 2 Use FG to select [3D Show] and then press the Q button. 3 Use HI to select the 3D image to play back and then press the Q button. MENU OK Set Slideshow To start a slideshow, press the  button. To stop the slideshow, press the  or Q button. 3D images are composed of JPEG files and MPO files. If any files are deleted on a computer, playback of 3D images may not be possible. Using the camera guide Use the camera guide to look up camera operations. 1 Press the E button in the standby mode screen or the playback screen. Search for a solution Learn about the camera History Search by situation Search by keyword Search by purpose Search by purpose Exit Submenu 2 Application Search by purpose Functions or operating methods can be searched. Search for a solution A solution can be searched when having problems during operation. Search by situation Search from shooting/playback scene. Search by keyword Search by the camera keyword. Learn about the camera Information is shown about recommended functions and basic operating methods for the camera. History Searches can be performed from the search history. 2 Use FGHI to select the desired item. ● Follow the on-screen instructions to search the desired contents.
Page: 24
24 EN To change the shooting mode To change the shooting mode The shooting mode (P, M, Q, , P, ~) can be changed by using the function menu. “Using the Menu” (p. 8) The default settings of the function are highlighted in . Shooting with automatic settings (M mode) The camera will automatically select the optimal shooting mode for the scene. The shooting condition is decided by the camera and most settings cannot be changed. 1 Set the shooting mode to M. 16M 0:00:34 0:00:34 4 4 NORM The icon changes depending on the scene that the camera automatically selects. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, [Program Auto] will be selected. Shooting with Beauty Fix effects (Q mode) Depending on the picture, the editing may not be effective. 1 Set the shooting mode to Q. Beauty MENU MENU 5M P P 2 Press G to go to the submenu. MENU MENU Recommended 5M Using Shooting Modes Using Shooting Modes
Page: 25
25 EN 3 Use HI to select the retouching setting, and press the Q button to set. 5M 0:00:34 0:00:34 4 4 NORM Retouching setting ● [Set 1], [Set 2] or [Set 3] retouches the image according to the Beauty Settings. [Beauty Settings] (p. 49) 4 Point the camera toward the subject. Check the frame appearing around the face detected by the camera,and then press the shutter button to take the picture. The unedited image and edited image are both saved. If the image cannot be retouched, only the unedited image is saved. The [Image Size] of the retouched image is fixed at [n]. 5 To save the image, select [OK] on the review screen and press the Q button. To retouch the image additionally, select [Beauty Fix]. OK Beauty Fix ● Beauty Fix 1 Select a retouching item, and press the Q button. MENU Off Eye Color Back 2 Press the Q button on the review screen. ● Settings for Beauty Fix can be registered.
Page: 26
26 EN Using the best mode for the shooting scene ( mode) 1 Set the shooting mode to . MENU MENU Scene Mode 16M 2 Press G to go to the submenu. MENU MENU Portrait MENU MENU 16M 3 Use HI to select the best shooting mode for the scene, and press the Q button. 16M 0:00:34 0:00:34 4 4 NORM Icon indicating current  mode In  mode, the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, some settings cannot be changed in some modes. Option Application BPortrait/FLandscape/ GNight Scene*1 /MNight+Portrait/ CSport/NIndoor/WCandle*1 / RSelf Portrait/SSunset*1 / XFireworks*1 /VCuisine/ dDocuments/KBeach & Snow/ Pet/W3D Photo*2 The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. *2 VR-360/D-760 and VR-350/D-755 only To take pictures of a moving subject like a To take pictures of a moving subject like a pet ([ pet ([  Pet]) Pet]) 1 Use HI to select [ Pet], and press the Q button to set. 2 Hold the camera to align the AF target mark on the subject and press the Q button. ● When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. “To focus on a moving subject continuously (AF Tracking)” (p. 35).
Page: 27
27 EN Shooting with special effects (P mode) Add an artistic effect to your photo by selecting the desired magic filter. 1 Set the shooting mode to P. MENU MENU Magic Filter 0.0 0.0 AUTO WB AUTO WB 16M 2 Press G to go to the submenu. MENU MENU 2 3 Pop Art 1 9 0.0 0.0 AUTO WB AUTO WB 16M To shoot 3D images ( To shoot 3D images (W mode) mode) (VR-360/D-760, VR-350/D-755) (VR-360/D-760, VR-350/D-755) 1 Use HI to select [Auto] or [Manual] and then press the Q button to set. Submenu 1 Description Auto The user only composes the shots so that the target marks and pointers overlap, and the camera automatically releases the shutter. Manual After shooting the first frame, move the camera to overlap the subject with the image in the screen. Then manually release the shutter. Depending on the subject or the situation (if the distance between the camera and subject is too short), the image may not look 3D. The 3D viewing angle varies depending on the subject, etc. To exit 3D shooting mode without saving an image, press the  button. The [Image Size] (p. 33) is fixed to [0]. The zoom ratio is fixed. The focus, exposure and the white balance are fixed when the first image is taken. The flash is fixed to [$Flash Off]. Images shot in 3D mode cannot be displayed in 3D on this camera’s screen. (VR-360/D-760 only)
Page: 28
28 EN 3 Use HI to select the desired effect and then press the Q button to set. 1 0.0 0.0 AUTO WB AUTO WB 16M 0:00:34 0:00:34 4 4 NORM Icon indicating current P mode Shooting mode Option Magic Filter 1Pop Art 2Pin Hole 3Fish Eye 4Drawing*1 5Soft Focus 6Punk 7Sparkle 8Watercolor*2 9Reflection*2 *1 Two images are saved, an unmodified image and an image to which the effect has been applied. *2 VR-360/D-760 and VR-350/D-755 only In P mode, the optimum shooting settings are pre-programmed for each effect. For this reason, some settings cannot be changed in some modes. Creating panoramic images (~ mode) Take pictures that can be joined to form a panorama using the supplied software. The focus, exposure, zoom position (p. 18), and white balance (p. 31) are locked at the first frame. The flash (p. 19) is fixed to $ (Flash Off) mode. 1 Set the shooting mode to ~, and press the Q button. MENU MENU P P Panorama 0.0 0.0 AUTO WB AUTO WB 16M 2 Use FGHI to select the pan direction.
Page: 29
29 EN 3 Press the shutter button to take the first frame, and then compose the second shot. 1 2 1 2 MENU Exit OK Set Before first shot After first shot ● After the first shot, the area shown in the white frame reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image on the monitor. 4 Repeat Step 3 until the number of desired frames is taken, and then press the  button when finished. Panorama shooting is possible for up to 10 frames. For information on creating panoramas, see the online help for the supplied software.
Page: 30
30 EN “Using the Menu” (p. 8) The default settings of the function are highlighted in . Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Select the macro option in the shooting function menu. P P 0.0 0.0 MENU MENU AUTO WB AUTO WB AUTO ISO AUTO ISO Off 16M 2 Use HI to select the setting option, and press the Q button to set. Option Description Off Macro mode is deactivated. Macro This enables shooting as close as 20 cm/7.9 in.*1 (90 cm/35.4 in.*2 ) to the subject. Super Macro*3 This enables shooting as close as 1 cm/0.3 in. to the subject. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 19) and zoom (p. 18) cannot be set during super macro shooting. Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Select the self-timer option in the shooting function menu. P P 12 12 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU 2 2 Y Off 16M 2 Use HI to select the setting option, and press the Q button to set. Option Description Y Off The self-timer is deactivated. Y 12 sec The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Y 2 sec The self-timer lamp blinks for approx. 2 seconds, and then the picture is taken. To cancel the self-timer after it starts To cancel the self-timer after it starts Press the  button. Using Shooting Functions Using Shooting Functions
Page: 31
31 EN Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (M, Q, and  excluded) can be adjusted brighter or darker to obtain a desired shot. 1 Select the exposure compensation option in the shooting function menu. Exposure Comp. P P MENU MENU AUTO WB AUTO WB AUTO ISO AUTO ISO 0 0 ± 0.0 16M 1 1 2 2 2 2 1 1 2 Use HI to select the desired brightness, and press the Q button. Adjusting to a natural color scheme (White balance) For more natural coloring, choose a white balance option suited to the scene. 1 Select the white balance option in the shooting function menu. P P 0.0 0.0 AUTO ISO AUTO ISO MENU MENU WB WB Auto AUTO WB AUTO WB 16M 2 Use HI to select the setting option, and press the Q button to set. Option Description WB Auto The camera automatically adjusts the white balance according to the shooting scene. 5 Sunny For shooting outdoors under a clear sky. 3 Cloudy For shooting outdoors under a cloudy sky. 1 Incandescent For shooting under tungsten lighting. > Fluorescent For shooting under white fluorescent lighting (offices, etc.).  One Touch 1 For setting the subtle shades of color that cannot be adjusted by Auto, Sunny, Cloudy, Incandescent, or Fluorescent.  One Touch 2 Using the one touch white balance Using the one touch white balance 1 Select the white balance option in the function menu. 2 Use HI to select [] or [], and face the camera toward white paper. ● Set the paper to fill the entire screen, and make sure that there is no shadow area. ● Setting the zoom to telephoto (T) is recommended. ● Perform this procedure under the light where the pictures are actually taken. 3 Press the  button. ● The camera releases the shutter and the white balance is registered. ● The registered white balance is stored in the camera. The data will not be cleared by turning off the power. ● When the [] or [] whose white balance has already been registered is selected in Step 2, new white balance will be registered.
Page: 32
32 EN When the white area is not large enough or when the color is too bright, too dark, or loud, the white balance cannot be registered. Return to Step 2. Or, set the other white balance. Selecting the ISO sensitivity 1 Select the ISO setting option in the shooting function menu. 1/400 F3.0 P P 0.0 0.0 MENU MENU ISO Auto 1/400 F3.0 AUTO WB AUTO WB 16M AUTO ISO AUTO ISO HIGH ISO ISO HIGH 1600 ISO ISO 1600 100 ISO ISO 100 2 Use HI to select the setting option, and press the Q button to set. Option Description ISO Auto The camera automatically adjusts the sensitivity according to the shooting scene. High ISO Auto The camera uses a higher sensitivity compared to [ISO Auto] to minimize blur caused by a moving subject or by camera shake. Value The ISO sensitivity is fixed to the selected value. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. Sequential shooting (Drive) Pictures are taken sequentially while the shutter button is held down. 1 Select the drive option in the shooting function menu. P P 0.0 0.0 MENU MENU AUTO WB AUTO WB AUTO ISO AUTO ISO 2 2 Single 16M Option Description o Single One frame is shot each time the shutter button is pressed. j*1 Sequential Take sequential shots using the focus, brightness (exposure) and white balance set in the first frame. c High- Speed1 The camera takes sequential shots at a faster speed than in [j]. d High- Speed2 The camera takes sequential shots at a faster speed than in [c]. *1 The shooting speed varies depending on the settings for [Image Size/Compression] (p. 33/p. 34).
Page: 33
33 EN When set to [j], the flash (p. 19) cannot be set to [Redeye]. In addition, when set to [c] or [d], the flash is fixed to [Flash Off]. When set to [c] or [d], [Image Size] is limited to [3] or lower, and the ISO sensitivity is fixed to [ISO Auto]. Vertical lines may appear on the still image shot with [d] when the camera is pointed at an extremely bright subject under a clear sky and so on. Selecting the image size for still images (Image Size) 1 Select the image size option in the shooting function menu. P P MENU MENU 5M 8M 16:9S AUTO WB AUTO WB AUTO ISO AUTO ISO 0.0 0.0 4 4 16M 16M 2 Use HI to select the desired image size, and press the Q button. Option Description 16M (4608×3456) Suitable for printing pictures at A3 (11×17 in.). 8M (3264×2448) Suitable for printing pictures up to A3 (11×17 in.). 5M (2560×1920) Suitable for printing pictures at A4 (8.5×11 in.). 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing pictures at A5 (5×7 in.). 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures on emails and web sites. 16:9L (4608×2592)*1 Suitable for playing pictures on a widescreen TV and for printing on A3 or 11”×17”. 16:9S (1920×1080) Suitable for playing pictures on a widescreen TV and for printing on A5 or 5”×7”. *1 VR-360/D-760 only
Page: 34
34 EN Menus for Shooting Functions Menus for Shooting Functions The default settings of the function are highlighted in . For information on using the menus, see “Using the Menu” (p. 8). Restoring the shooting functions to the default settings [Reset] Restoring the shooting functions to the default settings [Reset] K (Camera Menu 1)  Reset Submenu 2 Application Yes Restores the following menu functions to the default settings. • Shooting mode (p. 24) • Flash (p. 19) • Macro (p. 30) • Self-timer (p. 30) • Exposure compensation (p. 31) • White balance (p. 31) • ISO (p. 32) • Drive (p. 32) • Image size (still images) (p. 33) • Menu functions in z (Shooting menu)/A (Movie menu) (p. 34 to 37) No The current settings will not be changed. Selecting the compression for still Selecting the compression for still images [Compression] images [Compression] K (Camera Menu 1)  Compression Submenu 2 Application Fine Shooting at high quality. Normal Shooting at normal quality. “Number of storable pictures (still images)/Recording length (movies) in the internal memory and cards” (p. 62) Selecting the image quality for movies Selecting the image quality for movies [Image Size/Frame Rate] [Image Size/Frame Rate] A (Movie menu)  Image Size/Frame Rate Submenu 1 Submenu 2 Application Image Size 720P (1280×720)/ VGA (640×480)/ QVGA (320×240) Select the image quality based on the image size and frame rate. Higher frame rates provide smoother movie images. Frame Rate 30fps*1 / 15fps*1 *1 frames per second “Number of storable pictures (still images)/Recording length (movies) in the internal memory and cards” (p. 63)
Page: 35
35 EN Reducing the blur caused by thecamera Reducing the blur caused by thecamera shake when shooting shake when shooting [Image Stabilizer] (still images)/ [Image Stabilizer] (still images)/ [IS Movie Mode] (movies) [IS Movie Mode] (movies) K (Camera Menu 1)  Image Stabilizer (still images)/ A (Movie menu)  IS Movie Mode (movies) Submenu 2 Application Off The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. On The image stabilizer is activated. The camera’s default settings are [Image Stabilizer] (still images) to [On] and [IS Movie Mode] (movies) to [Off]. There may be a noise coming from inside the camera when the shutter button is pressed with [Image Stabilizer] (still images) set to [On]. Images may not be stabilized if camera shake is too severe. When the shutter speed is extremely slow, such as when taking pictures at night, [Image Stabilizer] (still images) may not be as effective. When shooting while the [IS Movie Mode] (movies) is set to [On], the image will be enlarged somewhat before saving. Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode] K (Camera Menu 1)  AF Mode Submenu 2 Application Face/iESP The camera focuses automatically. (If a face is detected, it is shown by a white frame*1 ; when the shutter button is pressed halfway and the camera is able to focus, the frame color is changed to green*2 if the camera is able to focus. If no face is detected, the camera chooses a subject in the frame and focuses automatically.) Spot The camera focuses on the subject located within the AF target mark. AF Tracking The camera tracks the subject movement automatically to focus on it continuously. *1 For some subjects, the frame may not appear or may take some time to appear. *2 If the frame blinks in red, the camera is unable to focus. Try again to press the shutter button halfway. To focus on a moving subject To focus on a moving subject continuously (AF Tracking) continuously (AF Tracking) 1 Hold the camera to align the AF target mark on the subject and press the Q button. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. 3 To cancel the tracking, press the Q button. Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or fail to track the subject movement. When the camera fails to track the subject movement, the AF target mark changes to red.
Page: 36
36 EN Shooting at higher magnifications than Shooting at higher magnifications than optical zoom [Digital Zoom] optical zoom [Digital Zoom] K (Camera Menu 1)  Digital Zoom Submenu 2 Application Off Disable digital zoom. On Enable digital zoom. [Digital Zoom] is not available when [% Super Macro] (p. 30) is selected. The option selected for [Digital Zoom] affects the appearance of the zoom bar. “To take larger images [Digital Zoom]” (p. 18) Recording sound when shooting Recording sound when shooting movies [ movies [R R] ] A (Movie menu)  R Submenu 2 Application Off No sound is recorded. On Sound is recorded. Using the AF illuminator to focus on a Using the AF illuminator to focus on a shadowed subject [AF Illuminat.] shadowed subject [AF Illuminat.] K (Camera Menu 1)  AF Illuminat. Submenu 2 Application Off The AF illuminator is not used. On When the shutter button is pressed halfway down, the AF illuminator turns on to aid focusing. AF illuminator
Page: 37
37 EN Displaying icon guides [Icon Guide] Displaying icon guides [Icon Guide] K (Camera Menu 1)  Icon Guide Submenu 2 Application Off No icon guide is displayed. On The explanation of the selected icon will be displayed when a shooting mode or shooting function menu icon is selected (position the cursor on the icon for a while to display the explanation). Icon guide P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO MENU MENU Program Auto Functions can be changed manually. 16M Imprinting the date of recording Imprinting the date of recording [Date Stamp] [Date Stamp] K (Camera Menu 2)  Date Stamp Submenu 2 Application Off Do not imprint the date. On Stamp new photographs with the date of recording. [Date Stamp] is not available if the clock has not been set. “Language, date, time, and time zone” (p. 15) The date stamp can not be deleted. [Date Stamp] is not available in ~ or 3D mode or during sequential shooting.
Page: 38
38 EN Menus for Playback, Editing, and Printing Functions Menus for Playback, Editing, and Printing Functions The default settings of the function are highlighted in . Playing back pictures automatically Playing back pictures automatically [Slideshow] [Slideshow] q (Playback menu)  Slideshow To start a slideshow To start a slideshow Submenu 2 Submenu 3 Application BGM Off/On Selects the background music options. Type Normal/Fader/ Zoom Selects the type of transition effect used between slides. Start ― Starts the slideshow. 1 Select the desired [BGM] and [Type]. 2 Select [Start] and press the Q button. Single-frame advance/rewind Single-frame advance/rewind During a slideshow, press I to skip ahead one frame or press H to go back one frame. To stop the slideshow To stop the slideshow Press the Q button or the  button. Changing the image size [ Changing the image size [Q Q] ] q (Playback menu)  Edit  Q Submenu 2 Application 7 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications.  320 × 240 1 Use HI to select an image. 2 Use FG to select the size, and press the Q button. Cropping images [ Cropping images [P P] ] q (Playback menu)  Edit  P 1 Use HI to select an image, and press the Q button. 2 Use the zoom lever to choose the crop size and FGHI to move the crop position. MENU Back 3 Press the Q button. ● The edited image will be saved as a separate image.
Page: 39
39 EN Adding sound to still images [ Adding sound to still images [R R] ] q (Playback menu)  Edit  R 1 Use HI to select an image. 2 Aim the microphone toward the sound source. Microphone 3 Press the Q button. ● Recording starts. ● The camera adds (records) sound for approx. 4 seconds while playing back the image. Retouching faces on still images Retouching faces on still images [Beauty Fix] [Beauty Fix] q (Playback menu)  Edit  Beauty Fix Depending on the picture, the editing may not be effective. 1 Use HI to select an image, and press the Q button. 2 Use FG to select a retouching item, and press the Q button. 3 Select [OK] or [Beauty Fix] on the review screen, and press the Q button to save or retouch the image additionally. ● The retouched image is saved as a separate image. OK Beauty Fix The [Image Size] of the retouched image is fixed at [n]. Beauty Fix Beauty Fix 1 Select a retouching item, and press the Q button. MENU Off Eye Color Back 2 Press the Q button on the review screen. Brightening areas that are dark due Brightening areas that are dark due to backlight, insufficient light or other to backlight, insufficient light or other reasons [Lighting Fix] reasons [Lighting Fix] q (Playback menu)  Edit  Lighting Fix Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. 1 Use HI to select an image, and press the A button. ● The edited image is saved as a separate image.
Page: 40
40 EN Retouching red eyes in flash shooting Retouching red eyes in flash shooting [Redeye Fix] [Redeye Fix] q (Playback menu)  Edit  Redeye Fix Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. 1 Use HI to select an image, and press the A button. ● The edited image is saved as a separate image. Erasing images [Erase] Erasing images [Erase] q (Playback menu)  Erase Submenu 1 Application All Erase All images in the internal memory or card will be erased. Sel. Image Images are individually selected and erased. Erase Deletes the image displayed. When erasing pictures in a internal memory, do not insert the card into the camera. To erase all images [All Erase] To erase all images [All Erase] 1 Use FG to select [All Erase], and press the Q button. 2 Use FG to select [Yes], and press the Q button. To individually select and erase images To individually select and erase images [Sel. Image] [Sel. Image] 1 Use FG to select [Sel. Image], and press the Q button. 2 Use HI to select the image to be erased, and press the Q button to add a R mark to the image. ● Turn the zoom lever to the W end to display an index view. Images can be quickly selected using the FGHI buttons. Turn to the T end to return to the single frame display. Sel. Image Erase/Cancel OK MENU (1) 4/30 R mark 3 Repeat Step 2 to select the images to be erased, and then press the  button to erase the selected images. 4 Use FG to select [Yes], and press the Q button. ● The images with a R mark are erased.
Page: 41
41 EN Saving print settings to the image data Saving print settings to the image data [Print Order] [Print Order] q (Playback menu)  Print Order “Print Reservations (DPOF)” (p. 53) Protecting images [ Protecting images [R R] ] q (Playback menu)  R Protected images cannot be erased by [Erase] (p. 21, 40),[Sel.Image],or[AllErase](p. 40),butallimagesare erased by [Memory Format]/[Format] (p. 42). 1 Use HI to select an image. 2 Press the Q button. ● Press the Q button again to cancel the settings. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the  button. Rotating images [ Rotating images [y y] ] q (Playback menu)  y 1 Use HI to select an image. 2 Press the Q button to rotate the image. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the  button. The new picture orientations will be saved even after the power is turned off.
Page: 42
42 EN Menus for Other Camera Settings Menus for Other Camera Settings The default settings of the function are highlighted in . Erasing data completely Erasing data completely [Memory Format]/[Format] [Memory Format]/[Format] d (Settings Menu 1)  Memory Format/Format Before formatting, check that no important data is left in the internal memory or card. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Submenu 2 Application Yes Completely erases the image data in the internal memory*1 or card (including protected images). No Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory Copying images in the internal memory to the card [Backup] to the card [Backup] d (Settings Menu 1)  Backup Submenu 2 Application Yes Backs up image data in the internal memory to the card. No Cancels the backup. Using an Eye-Fi card [Eye-Fi] Using an Eye-Fi card [Eye-Fi] d (Settings Menu 1)  Eye-Fi Submenu 2 Application All Automatically sends all the image. Sel. Image Automatically sends the selected images. Off Disable Eye-Fi communication. When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully, and comply with the instructions. Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used. In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card from the camera, or set [Eye-fi] to [Off]. This camera does not support the Eye-Fi card’s Endless mode.
Page: 43
43 EN Selecting a method for connecting the Selecting a method for connecting the camera to other devices camera to other devices [USB Connection] [USB Connection] d (Settings Menu 1)  USB Connection Submenu 2 Application Auto When the camera is connected to another device, the settings selection screen is displayed. Storage Select when transferring images to a computer or when using the supplied software with the camera connected to a computer. MTP Select when transferring images to a computer running Windows Vista or Windows 7 without using the supplied software. Print Select when connecting to a PictBridge-compatible printer. System requirements System requirements Windows Windows XP (Service Pack 1 or later)/ Windows Vista/Windows 7 Macintosh Mac OS X v10.3 or later Even if a computer has USB ports, proper operation is not guaranteed in the following cases. ● computers with USB ports installed using an expansion card, etc. ● computers without a factory-installed OS and home-built computers Turning on the camera with the Turning on the camera with the q q button [ button [q q Power On] Power On] d (Settings Menu 1)  q Power On Submenu 2 Application No The camera is not turned on. To turn on the camera, press the n button. Yes Press and hold the q button to turn the camera on in the playback mode. Saving the mode when the camera is Saving the mode when the camera is turned off [Keep turned off [Keep K K Settings] Settings] d (Settings Menu 1)  Keep K Settings Submenu 2 Application Yes The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. No The shooting mode is set to P mode when the camera is turned on.
Page: 44
44 EN Selecting the camera sound and its Selecting the camera sound and its volume [Sound Settings] volume [Sound Settings] d (Settings Menu 1)  Sound Settings Submenu 2 Submenu 3 Application Sound Type 1/2/3 Choose the sound made by camera controls. Volume OFF (No Sound) or 5 levels of volume Choose the volume of the sound made by camera controls. q Volume OFF (No Sound) or 5 levels of volume Adjusts the image playback volume. Adjusting the CCD and the image Adjusting the CCD and the image processing function [Pixel Mapping] processing function [Pixel Mapping] d (Settings Menu 2)  Pixel Mapping This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image To adjust the CCD and the image processing function processing function Press the Q button when [Start] (Submenu 2) is displayed. ● The camera checks and adjusts the CCD and the image processing function at the same time. Adjusting the brightness of the monitor Adjusting the brightness of the monitor [ [s s] ] d (Settings Menu 2)  s Submenu 2 Application Bright/Normal Selects the monitor brightness depending on the surrounding brightness.
Page: 45
45 EN Viewing images on a TV [TV Out] (VR-360/D-760) Viewing images on a TV [TV Out] (VR-360/D-760) d (Settings Menu 2)  TV Out Submenu 2 Submenu 3 Application NTSC/PAL NTSC Choose when connecting the camera to TVs in countries or regions where NTSC is used (e.g., North America, Taiwan, Korea, and Japan). PAL Choose when connecting the camera to TVs in countries or regions where PAL is used (e.g., Europe and China). HDMI Out 480p/576p/720p/1080i Choose an HDMI output format. HDMI Control Off Playback operations are performed using camera controls. On Playback operations are performed using the TV remote control. Camera factory defaults vary with the country or region of sale. Viewing images on a TV Viewing images on a TV Using an AV cable 1 Match the camera video signal format ([NTSC]/[PAL]) to that used by the TV. 2 Connect the camera to the TV. Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Multi-connector
Page: 46
46 EN Using an HDMI cable 1 Match the camera digital signal format ([480p/576p]/[720p]/[1080i]) to that used by the TV. 2 Connect the camera to the TV. 3 Turn the TV on and select the HDMI input to which the camera is connected. 4 Turn the camera on and use FGHI to view images. Different countries and regions use different video signal standards. Before connecting the camera, choose a video signal standard that matches that used by the TV. Do not connect the HDMI cable when the camera is connected to a computer or other device using the USB cable. Connect to the HDMI connector on the TV. HDMI mini connector HDMI cable Connector cover See the instruction manual provided with your TV for more information. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Images and other information may be cropped for display on the TV. Using a remote control Using a remote control 1 Select [On] for [HDMI Control] and turn the camera off. 2 Connect the camera to the TV using an HDMI cable. “Using an HDMI cable” (p. 46) 3 First turn on the TV, and then turn on the camera. ● Follow the on-screen guide displayed by the TV to operate the camera. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and use the controls on the camera.
Page: 47
47 EN Selecting a video signal system to match your TV [NTSC/PAL] Selecting a video signal system to match your TV [NTSC/PAL] (VR-350/D-755, VR-340/D-750) (VR-350/D-755, VR-340/D-750) d (Settings Menu 2)  NTSC/PAL Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Multi-connector 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” 4 Press the q button, and use HI to select the image for playback. The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. For details on changing the input source of the TV, refer to the TV’s instruction manual. Depending on the TV’s settings, the displayed images and information may become cropped.
Page: 48
48 EN Saving battery power between shots Saving battery power between shots [Power Save] [Power Save] d (Settings Menu 2)  Power Save Submenu 2 Application Off Cancels [Power Save]. On When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode To resume standby mode Press any button. Changing the display language [ Changing the display language [W W] ] d (Settings Menu 2)  W Submenu 2 Application Languages The language for the menus and error messages displayed on the monitor is selected. 1 Use FGHI to select your language and press the Q button. Setting the date and time [ Setting the date and time [X X] ] d (Settings Menu 2)  X “Language, date, time, and time zone” (p. 15) Switching between home and travel destination time zones [World Time] Switching between home and travel destination time zones [World Time] d (Settings Menu 2)  World Time You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X]. Submenu 2 Submenu 3 Application Home/Alternate x The time in the home time zone (the time zone selected for x in submenu 2). z The time in the travel destination time zone (the time selected for z in submenu 2). x*1 — Select the home time zone (x). z*1, 2 — Select the travel destination time zone (z). *1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on. *2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z).
Page: 49
49 EN Registering the settings for Beauty Fix Registering the settings for Beauty Fix [Beauty Settings] [Beauty Settings] d (Settings Menu 3)  Beauty Settings Depending on the picture, the editing may not be effective. 1 Use FG to select a retouching setting, and press the Q button. 2 Press the shutter button to take a portrait picture. Take a portrait picture. The image is not saved. 3 Select a retouching item, and press the Q button. MENU Off Eye Color Back 4 Press the Q button on the review screen to save the image. ● Registration is complete.
Page: 50
50 EN Printing Printing Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [Easy Print] In the setup menu, set [USB Connection] (p. 43) to [Print]. 1 Display the image to be printed on the monitor. “Viewing images” (p. 20) 2 Turn on the printer, and then connect the printer and camera. Multi-connector OK Custom Print Easy Print Start MENU Easy Print Back USB cable (supplied) Y button 3 Press I to start printing. 4 To print another image, use HI to select an image, and press the Q button. To exit printing To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer.

Question & answers

Have a question about the Olympus D-755 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus D-755. Please make sure that you describe your difficulty with the Olympus D-755 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus D-755

Name
Email
Reaction

View a manual of the Olympus D-755 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: D-755
  • Filetype: PDF
  • Available languages: English, Spanish