Table of contents
Display symbols 1
Safety instructions 2
Instructions for use 3
Cleaning tips 6
Trouble shooting 7
Service and maintenance etc. 7
Guarantee and service 8
The dust bag is full and
needs to be changed
when the indicator is
1 Parking bracket
2 HEPA ﬁlter
4 Cable rewinder
5 On/off button
6 Power level
7 Dust bag indicator, mechanical
8 Accessory lid
9 Open/close button, dust container
10 Rating plate
11 Parking bracket
12 Upholstery nozzle
Thank you for choosing a
Nilﬁsk Coupé vacuum cleaner.
13 Brush nozzle
15 Dust bag
16 Hard ﬂoor nozzle
17--18 Combination nozzle
19 Sliding valve
• Do not use the machine without-
dust bag and ﬁlters properly ﬁtted.
• This machine is not intended for
the suction of hazardous materi-
als or gas, doing so may expose
people to serious health risks.
• The machine must not be used for
the suction of water or other liquids.
• Do not pick up sharp objects such
as needles or pieces of glass.
• Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
• Use and store this machine indoors
and in a dry environment, 0 °C to
• Do not use the machine outdoors.
• Do not handle the machine with
• Turn off the machine before
• To unplug, grasp the plug, not by
pulling on the cord. Do not carry
or pull the machine by the cord.
• The machine must not be used if
the cord shows any sign of dam-
age. Regularly inspect the cord for
damage, in particular if it has been
crushed, shut in a door or run over.
• Do not use the machine if it ap-
pears faulty. Have the machine
inspected by an authorized service
center if the machine has been
dropped, damaged, left outdoors
or has been exposed to water.
• No changes or modiﬁcations to
the mechanical or electrical safety
devices should be made.
• All repairs must be carried out
by an authorized service center.
• Use only original dust bags,
original ﬁlters and original
accessories from your local dealer.
Use of unauthorized dust bags and
ﬁlters will void the warranty.
• Turn off the machine and unplug
before starting dust bag or ﬁlter
change, grasp the plug, not by
pulling on the cord.
• Do not use the machine as a toy.
Do not leave children with the
machine without supervision.
• This appliance is not intended for
use by young persons or inﬁrm
persons without supervision unless
they have been adequately super-
vised by a responsible person to
ensure that they can use the appli-
ance safely. Young children should
be supervised to ensure that they
do not play with the appliance.
• If the supply cord is damaged, it
must be replaced by the manufac-
turer or its service agent or similary
qualiﬁed person in order to avoid a
Instructions for use
Before using the machine make sure
that the voltage shown on the rating
plate underneath the machine
corresponds with the mains voltage.
Start and stop
Pull out the cord and plug the machine
to a wall socket.
On/off button and power level.
Turn off the machine and unplug.
Unplug by grasping the plug,
not by pulling on the cord.
Connecting hose, tube and nozzles
Change of dust bag and ﬁlters
The size and quality of the dust bag
and ﬁlters affect the machine efﬁcien-
cy. Use of non original dust bags or
non original ﬁlters can cause restricted
air ﬂow which may lead to machine
overload. Using non-original dust bag
or ﬁlters will void the warranty.
Changing the dust bag
The dust bag indicator shows
completely red when to change
the dust bag.
Always use original dust bags.
Changing the preﬁlter
The preﬁlter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the preﬁlter
with every fourth dust bag. The pre-
ﬁlter is located behind the dust bag.
Always use original ﬁlters.
Changing the HEPA ﬁlter
The HEPA ﬁlter cleans the exhaust air
from micro particles the dust bag can
not keep. The HEPA ﬁlter can not be
brushed or washed clean.
Adjust the suction power
Sliding valve on the bent tube
The suction power is maximal with the
sliding valve closed and minimal when
all open. Adjust the suction power by
putting the sliding valve in the desired
The suction power is adjusted with the
slider on the machine.
Parking the tube and nozzle
There are two grooves for parking.
One located on the underside to use
when machine stands on the back,
and the other on the back to use when
the machine is standing on its wheels.
Adjust the suction power by means
of the power regulation or the sliding
valve on the bent tube.
Use the upholstery nozzle for
Use the brush nozzle for curtains and
Hard ﬂoor nozzle
Use the nozzle for hard ﬂoors.
Adjust the combination nozzle
depending on type of ﬂoor.
Use the turbo nozzle for efﬁcient
The models can include different
The machine is ﬁtted with a thermal
fuse, which prevents the machine from
overheating. If the thermal fuse blows,
the machine automatically switches off
the motor and must cool before it can
be started again.
1. Turn off the machine and unplug
from the wall socket.
2. See to that nothing blocks the air
ﬂow through the bent tube, hose,
tube, nozzle, dust bag or ﬁlters.
3. Let the machine cool.
4. Plug in the machine again and push
the start button. The machine will
not start until cool enough. If the
machine does not start turn it off
and unplug. Try again in a while.
Service and maintenance
• Store the machine indoors and in a
• Change the preﬁlter with every
fourth dust bag. The dust bag
package includes four dust bags
and one preﬁlter.
• Clean the machine surface with
a dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
• Service – contact your local dealer.
Recycling and scrapping
Recycle the wrapping and scrap the
machine according to recommen-
dations from the local authorities.
Cut the cord as short as possible to
avoid someone getting injured on the
This machine is designed with the
environment in mind. All plastic parts
due marked for recycling.
Nilﬁsk disclaim all responsibility for all
damage caused by incorrect use or
modiﬁcation of the machine.
The warranty can vary between
different countries. Contact your local
dealer for information.
Repair or service of electrical
components such as cord or motor,
must only be carried out by an
authorized service center.
If the machine
does not start
Check that the plug
is correctly ﬁtted to
the wall socket.
A fuse in the
building may have
blown and needs
to be changed.
The cord or plug
may be damaged
and must be
repaired by an
The dust bag may
be full and needs
to be changed,
HEPA ﬁlter can be
blocked and have
to be changed,
The bent tube,
hose, tube or
nozzle may be
blocked and needs
to be cleaned.
If the machine
The thermal fuse
may have blown,
The guarantee does not cover:
• Normal wear and tear of accesso-
ries and ﬁlters.
• Defects or damage occurring as a
direct or indirect result of incorrect
use - such as the vacuuming of
rubble, hot ashes or carpet
• Abuse, loss or lack of maintenance
as described in Instructions for
• If the machine has been used for
• If the machine has been used for
suction of water,plaster dust or
Nor will it cover incorrect or poor
conﬁguration, i.e. setting up or
connection, nor ﬁre-damage, ﬁre,
lightning strike or unusual voltage
ﬂuctuations or any other electrical
disturbances such as defective fuses
or defective electrical installations
on the supply grid, and defects or
damage in general that Nilﬁsk-
Advance consider to be the result
of causes other than manufacturing
and material defects.
The guarantee becomes void:
• If a defect is caused by the use of
non-original Nilﬁsk dust bags and
• If the identity number is removed
from the vacuum cleaner.
• If the vacuum cleaner has been
repaired by a non-Nilﬁsk authorized
• If the machine is used in a com-
mercial environment, i.e. building
contractors, cleaning contractors,
professional trades or any other
The guarantee is valid in:
Denmark, Sweden, Norway, Great
Britain, Ireland, Belgium, Holland,
France, Germany, Poland, Russia,
Austria, Switzerland, Spain, Portugal,
Australia and New Zealand, Estonia,
Latvia, Lithuania, Hungary, Greece,
Slovenia, Slovakia, The Czech
Republic, Italy, Finland.
Australia Customer Care helpline:
Telephone 1300 733 171