Business

Nilfisk Business manual

Business

User manual for the Nilfisk Business in Dutch. This PDF manual has 68 pages.

Page: 1
DOORGUARD350 1 ENGLISH SAFETY WARNINGS x To prevent short circuits, this product (except the outdoor camera) should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc. x Do not expose the components of your systems to extremely high temperatures or bright light sources. x In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility. x This product is not a toy. Keep out of reach of children. x Do not open the product: the device may contain live parts. The product should only be repaired or serviced by a qualified repairman. x Only connect the power cord after checking whether the mains voltage is the same as the values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier.
Page: 2
© MARMITEK 2 TABLE OF CONTENTS SAFETY WARNINGS..................................................................................1 TABLE OF CONTENTS ...............................................................................2 INTRODUCTION........................................................................................3 SET CONTENTS .........................................................................................3 Set......................................................................................................3 Extra monitor (available separately)................................................3 INSTALLATION..........................................................................................4 Step 1. Mounting the doorbell camera onto the door frame........5 Step 2. Connecting the cable for the camera..................................5 Step 3. Mounting the monitor onto the wall. ................................5 SETTING BRIGHTNESS, CONTRAST AND COLOUR ..................................6 FUNCTION.................................................................................................6 EXTRA POSSIBILITIES WITH YOUR DOORGUARD350 .............................7 Connecting an electric door opener................................................7 Connecting multiple monitors .........................................................7 FREQUENTLY ASKED QUESTIONS ...........................................................8 TECHNICAL DATA ....................................................................................9
Page: 3
DOORGUARD350 3 ENGLISH INTRODUCTION Congratulations on your purchase of the Marmitek DoorGuard350™. Using this video-door phone you can hear and see the visitor at the door (without the visitor being aware of it) before you decide to open it. The camera is concealed in the small doorbell and delivers high quality pictures, even in the dark. This camera is small enough to mount onto the door frame, without the need to drill holes in the (hollow) wall. SET CONTENTS Set 1. Monitor with screen 2. Wall plate for the monitor 3. Doorbell with camera and rain cover 4. Power adapter 5. 10 meters 4 core cable for connecting the camera 6. 1.5 metre 2-core cable for connecting the universal electric door- opener 7. Mounting hardware 8. User manual Extra monitor (available separately) 1. Monitor with screen 2. Wall plate for the monitor 3. Power adapter 4. 10 meters 4 core cable to connect to the first monitor 5. Mounting hardware 6. Special tool 7. User manual
Page: 4
INSTALLATION Description of the parts Doorbell camera front 1. 2. 3. 4. 5. 6. 1. 1. Screw hole 2. Loudspeaker 3. Camera 4. LEDs, for visibility in the dark 5. Bell button 6. Microphone Doorbell camera back 7. 8. 7. 2-core cable with connector for connecting electric door-opener. 8. 4-wire earthed power cable with connector for transfer of image and sound to monitor 11. 15. 18. 17. 10. 9. 14. 12. 20. 19. 16. 13. 21. R3 Black (GND) R2 Red (VDD) R1 White (Audio) R4 Yellow(Video) Monitor 9. Microphone 16. Mute button 10. Loudspeaker 17. Volume button 11. screen 18. Menu button 12. Power ‘On’ LED 19. + button 13. Monitor button 20. – button 14. Intercom button 21. Ring tones button 15. Door-open button Connection contacts for camera cable (R1 thru R4) DC adapter connection © MARMITEK 4
Page: 5
DOORGUARD350 5 ENGLISH Step 1. Mounting the doorbell camera onto the door frame. x Drill a hole (15mm) in the door frame at the height that you want to mount the doorbell camera. x Pass the power cable through the hole in the rain cover and through the door frame. x Attach the camera and rain cover to the frame with the screws supplied. x Cover the screw holes in the camera with the caps supplied. Step 2. Connecting the cable for the camera. x The additionally supplied cable for the connection of the camera, has a black male connector at the camera end and a 4 U connector at the monitor end. Click the black connector of the doorbell camera onto the black male connector of the additionally supplied cable. Guide the cable to the spot where the monitor is to be mounted (Beware: there should be a power socket in the area). x Mount the wall plate onto the wall using the four supplied screws. Step 3. Mounting the monitor onto the wall. x Take the monitor and secure the cable’s 4 U-connectors in the correct order under the 4 connectors. x Connect the power adapter with the backside of the monitor. x Now place the monitor against the wall plate and move it up and down against the plate such that it snap-locks onto the plate. x Your DoorGuard350™ has now been installed successfully and is ready to use. x You can always slide off the monitor by sliding it upwards.
Page: 6
© MARMITEK 6 SETTING BRIGHTNESS, CONTRAST AND COLOUR You can set the following by pressing numerous times on the menu button: BRIGHTNESS CONTRAST COLOUR Change the setting by pressing on the + or – button. FUNCTION As soon as a visitor rings the doorbell by pressing on the doorbell button, the image will appear instantly on the monitor in the house. This way you can see who is at the door before you decide to open it (or pretend you’re not at home). To speak to the visitor, you simply press the monitor button. If you have also installed an electric door opener, you can open the door by pressing on the door-open button. (Only works if you have an image on the monitor) If you wish to look outside without anyone having rung the doorbell, press the monitor button. You cannot be heard outside when you do this. If you wish those outside to hear you, press the intercom button. You can switch off the monitor’s bell with the mute button. The on/mute button then changes from red to blue. Pressing the mute button again reconnects the bell. And the blue colour changes back to red.
Page: 7
DOORGUARD350 7 ENGLISH EXTRA POSSIBILITIES WITH YOUR DOORGUARD350 Connecting an electric door opener - To open the door from the monitor. - The camera will provide the power for the door-opener - You need an electric door opener of 8 to 12 V DC. (Marmitek art nr 09774). - Connect the door opener to the 2-core cable supplied. The cable connector connects to the 2-core connector on the camera. Connecting multiple monitors - To be able to see who is at the door from several places (max. 4). DoorGuard350 Hands Free monitor: art.no: 08056 (E version) 08062 (UK version). The 4-core cable that is supplied with the extra monitor is parallel connected to the first monitor’s connection points. A 3rd or 4th monitor can be connected to the 2nd or 3rd monitor. - If you want to bridge a greater distance, then check out the following table for the required cable type. Cable length Required cable type 1-25m 4 core cable of minimum 4x 0,55mm2 25-50m coax cable, 75 ohm of minimum 0,5mm2 + 2 wire audio 0,35mm2 50-100m coax cable, 75 ohm of minimum 1.0mm2 + 2 wire audio 0,35mm2 100-300m coax cable, 75 ohm of minimum 1.5mm2 + 2 wire audio 0,5mm2
Page: 8
© MARMITEK 8 FREQUENTLY ASKED QUESTIONS There is no image Check if the power cable is properly connected to the power socket. Check the position of the button for minimum and maximum contrast, and turn the wheel on the side to select the best image. Check if the connectors are properly fixed There is no sound Check if the connectors are properly fixed The image is hazy (clouds) Check if there are interferences in the surrounding area. For example a high voltage cable, electric appliances etc. Do you still have questions? Please check out www.marmitek.com for more information.
Page: 9
ENGLISH TECHNICAL DATA Monitor Resolution: 320 x 240 Power supply: 230V AC DC 15V Screen: 4"/ 10cm Bell sound: Ding-dong (adjustable volume) Power consumption: Max 5 Watt (without door opener) Door open switch: Max DC12V/1A. Dimensions: 220x120x25mm Camera Camera: CMOS Colour Lens and angle: 50° Min. illumination: 0,1 LUX Night vision: 5 Infrared LEDs Sound: Built-in microphone and loudspeaker Dimensions: 45x120x35mm Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. DOORGUARD350 9
Page: 10
© MARMITEK 60 0 DECLARATION OF CONFORMITY Hereby, Marmitek BV, declares that this DOORGUARD350 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 2004/108/ec of the european parliament and of the council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes DOORGUARD350 den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtliniën: Richtlinie 2004/108/eg des europäischen parlaments und des rates vom 15. Dezember 2004 zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über die elektromagnetische Verträglichkeit Richtlinie 2006/95/EG des Europäischen Parlaments und des Rates vom 12. Dezember 2006 zur Angleichung der Rechtsvorschriften der Mitgliedstaaten betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen Richtlinie 2002/95/EG des Europäischen Parlaments und des Rates vom 27. Januar 2003 zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten Verordnung (EG) Nr. 278/2009 der Kommission vom 6. April 2009 zur Durchführung der Richtlinie 2005/32/EG des Europäischen Parlaments und des Rates im Hinblick auf die Festlegung von Ökodesign-Anforderungen an die Leistungsaufnahme externer Netzteile bei Nulllast sowie ihre durchschnittliche Effizienz im Betrieb
Page: 11
MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN – THE NETHERLANDS Copyrights Marmitek is a trademark of Pattitude B.V. ʜ DoorGuard350 is a trademark of Marmitek B.V. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions. MARMITEK www.mamitek.com DOORGUARD350 63

Question & answers

Have a question about the Nilfisk Business but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Nilfisk Business. Please make sure that you describe your difficulty with the Nilfisk Business as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Nilfisk Business

Name
Email
Reaction

View a manual of the Nilfisk Business below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Nilfisk
  • Product: Vacuum Cleaners
  • Model/name: Business
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Norwegian, Finnish