MiVue 786 manual
Mio MiVue 786manual

User manual for the Mio MiVue 786 in English. This PDF manual has 32 pages.

PDF 32 1.1mb

View a manual of the Mio MiVue 786 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

MANUALSCAT | EN

Question & answers

Have a question about the Mio MiVue 786 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Mio MiVue 786. Please make sure that you describe your difficulty with the Mio MiVue 786 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Mio MiVue 786

Page: 1
1 Revision: R01 (8/2017) Disclaimer The screenshots in this manual may differ between different operating systems and software versions. You can download the latest User Manual of your product from Mio™ website (www.mio.com). Specifications and documents are subject to change without notice. MiTAC does not warrant this document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the device and the documents. Note Not all models are available in all regions. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. MiTAC Europe Ltd. Spectrum House, Beehive Ring Road, London Gatwick Airport, RH6 0LG, UNITED KINGDOM
Page: 2
2 Getting to know your dash cam............................................................................. 4 Rear camera.................................................................................................... 5 Power button.................................................................................................... 5 System indicator. .............................................................................................. 5 Using your dash cam in a vehicle. ......................................................................... 6 Precautions and notices................................................................................... 6 Inserting a memory card. ....................................................................................... 9 Formatting a card............................................................................................. 9 Connecting an external device............................................................................ 10 Connecting to your computer......................................................................... 10 Connecting an external AV device. ................................................................. 10 Turning the dash cam on. .................................................................................... 10 Restarting the dash cam................................................................................ 10 Using the touch screen. ........................................................................................11 Switching screens.......................................................................................... 12 Setting the date and time.................................................................................... 12 Recording in driving mode. .................................................................................. 13 Continuous recording..................................................................................... 13 Event recording.............................................................................................. 13 Recording in Parking mode................................................................................. 14 Camera mode. ..................................................................................................... 15 Playback mode.................................................................................................... 15 Safety camera alerts........................................................................................... 16 Adding a safety camera................................................................................. 17 Updating safety camera data......................................................................... 17 Getting connected............................................................................................... 18 MiVue Pro app. ............................................................................................... 18 Setting up a WIFI connection......................................................................... 18 Table of Contents
Page: 3
3 Setting up a Bluetooth connection................................................................. 19 The Menu screen................................................................................................ 20 System settings.............................................................................................. 22 MiVue Manager................................................................................................... 25 Installing MiVue Manager............................................................................... 25 Playing the recording files.............................................................................. 25 For more information........................................................................................... 27 Caring for your device.................................................................................... 27 Safety precautions......................................................................................... 28 About charging.......................................................................................... 28 About the charger. ..................................................................................... 28 About the battery....................................................................................... 29 About GPS..................................................................................................... 29 Regulatory information................................................................................... 30 Declaration of conformity.......................................................................... 31 Bluetooth........................................................................................................ 31 WEEE. ............................................................................................................ 31
Page: 4
4 Getting to know your dash cam Note: The screenshots and other presentations shown in this manual may differ from the ones generated by the actual product. 1 Mini-USB connector 2 AV-out connector* 3 Device mount socket 4 Microphone 5 Touch screen 6 System indicator 7 Shutdown button * For selected models only. 8 Speaker 9 Camera lens 10 Power button 11 Memory card slot
Page: 5
5 Rear camera Depending on your model, your device may support a rear camera (may be sold separately). 1 Mounting pad 2 Camera lens 3 Adjustment bolt 4 Micro-USB connector 16 1 2 3 4 Power button l Press and hold for 2 seconds to manually turn the dash cam on and off. l When the dash cam is turned on, press to switch the LCD screen on and off. System indicator The system indicator glows in green when the dash cam is charging. During charging, the LED flashes in green and amber alternately while the recording is in progress.
Page: 6
6 Using your dash cam in a vehicle Precautions and notices l Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. l A window mount is needed when using the dash cam in a car. Make sure that you place the dash cam in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags. l Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean. l If the car’s windscreen is tinted with a coating, it may impact the recording quality. l To ensure the highest quality recordings, you are advised to place the dash cam near the rear view mirror. l Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. l If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your device where there is a “clear area.” l The system will automatically calibrate the G sensor of the device during start- up. To avoid G sensor malfunction, always turn the device on AFTER you mount it in the vehicle properly.
Page: 7
7 Make sure that your car is parked on level ground. Follow the instructions to mount your dash cam in a vehicle securely. 1. Mount the dash cam. 2. Mount the rear camera (optional). Note: l Before sticking the mounting pad, it is recommended to clean the windscreen with rubbing alcohol. l If the adhesion of the adhesive tape does not perform well, replace the tape with a new one.
Page: 8
8 3. Adjust the lens angle. When adjusting the angle of mounting, make sure that the camera’s view is parallel with the level ground and the ground/sky ratio is close to 6/4. 4. Connect the cables. Route the cables through the top ceiling and the A-pillar so that it does not interfere with driving. Make sure that the cable installation does not interfere with the vehicle's airbags or other safety features. If you only use the dash cam (without connecting the rear camera) in your vehicle, simply connect the car charger to the dash cam and then plug it to the cigarette lighter. The installation illustrations are for your reference only. The placement of the devices and cables may vary depending on the vehicle model. If you encounter any problems during installation, contact a skilled installer (such as the service personnel of the vehicle) for assistance. MiVue dash cam Y cable Rear camera cable Car charger MiVue rear camera 1 2 3
Page: 9
9 Inserting a memory card You must insert a memory card (not supplied) before you can start recording. The dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity. Hold the card by the edges and gently insert it into the slot as shown in the illustration. To remove a card, gently push the top edge of the card inwards to release it and pull it out of the slot. Note: l DO NOT apply pressure to the centre of the memory card. l MiTAC does not guarantee the product’s compatibility with memory cards from all manufacturers. l Before you start recording, please format the memory card to avoid malfunction caused by files not created by the dash cam. l Turn the device off before removing the memory card. Formatting a card To format a memory card (all data will be erased), tap > > .
Page: 10
10 Connecting an external device Connecting to your computer You can connect the dash cam to your computer to access data on the memory card. Connect the dash cam to the computer via a USB cable (not supplied). Connecting an external AV device Note: This feature is not available for all models. For a better viewing experience, you can use the AV-out connector to connect the dash cam to an external AV device via an AV cable (not supplied). Turning the dash cam on Complete the installation according to the instructions in the “Using your dash cam in a vehicle” section. Once the vehicle engine is started, the dash cam automatically turns on. Restarting the dash cam Occasionally, you may need to perform a hardware reset when the dash cam stops responding or if it appears to be “frozen” or unresponsive. To restart the dash cam, press and hold the Power button until the system is shut down; press the Power button again to turn the dash cam on.
Page: 11
11 If the system does not shut down by keeping the Power button pressed, you can force it to shut down by inserting a small rod (such as a straightened paper clip) into the Shutdown button of the device and then press the Power button to turn the dash cam on. Using the touch screen To operate your dash cam, touch the screen with your fingertip. The system provides the control buttons and system icons on the screen. Depending on your settings and usage, the displayed buttons and icons may be different to indicate various functions and information of your dash cam. Control button 1 Adds a custom safety (speed) camera 2 Opens the Menu screen 3 Takes a photo 4 Starts an event recording manually System icon 5 Recording indicator 6 Time display 7 Bluetooth status* 8 WIFI status* 9 GPS signal 1 2 3 4 5 6 9 7 8 Recording screen * For selected models only.
Page: 12
12 Switching screens Once you connect the rear camera and start recording, the screen displays the PIP (picture-in- picture) mode. By default, the main screen displays the image of the front camera and the sub screen displays the image of the rear camera. You can switch the front and rear camera images by slightly tapping the sub screen. Setting the date and time To make sure that the date and time of your recordings are correct, check the settings before you begin recording. 1. Tap > > > . 2. Tap (Use GPS time) or (Manual). l When you select Use GPS time, tap / to set the time zone of your location and then set the daylight saving time. The system will set date and time according to the GPS location. l When you select Manual, the system will display the date and time setting screen. Tap / to adjust the value of the selected field; tap and repeat the step until all fields have been changed. 3. When done, tap . (Sub screen) (Main screen)
Page: 13
13 Recording in driving mode Continuous recording By default, the system will automatically begin with continuous recording in a few seconds after start-up. The recording may be divided into several video clips; recording will not stop between video clips. When continuous recording is in progress, you can manually stop recording by tapping . Tap to return to the recording screen; the system will start continuous recording automatically. The continuous recordings can be found in the “Video” category for file playback. Event recording By default, if an event happens such as a sudden impact, high speed driving, an aggressive turn or an accidental crash during continuous recording, the G sensor will prompt the dash cam to start recording the event. Note: You can change the sensitivity level of the G sensor by selecting > > > . If you want to manually start an event recording while continuous recording is in progress, tap on the recording screen. The event recordings can be found in the “Event” category for file playback.
Page: 14
14 Recording in Parking mode Your dash cam supports the parking recording function. You must use an additional power source to record the video during Parking mode, such as Mio Smart Box uninterruptible power cable which is sold separately. For more information on using Mio Smart Box, see the provided documentation in its package. The Parking mode function is disabled by default. You can enable the function by selecting > > > > . Before enabling Parking mode, please check the memory storage allocation of your device. Select > > > > to set a proper allocation for parking recording. Changing the allocation will erase the memory card, so save any videos or photos to your computer first. When the Parking mode detection is enabled, the system will enter Parking mode when you: l Disconnect the device's power (for example, when the vehicle engine is stopped or the power cable is disconnected) or when the car stops moving for about 5 minutes. Note: The feature is triggered by the G sensor of the device. You can change the configuration by selecting > > > . l Tap to manually start Parking mode while continuous recording is in progress. To stop Parking mode and resume continuous recording, tap . If movements are detected and recorded during Parking mode, you will be asked to playback the video when you stop Parking mode. The parking recordings can be found in the “Parking” category for file playback.
Page: 15
15 Camera mode The dash cam allows you to take a photo. l If the recording is in progress, tap to take a photo. This function is not available when the rear camera is connected. l Tap > > . The photos can be found in the “Photo” category for file playback. Playback mode 1. Tap > . 2. Select the desired type: (Video) / (Event) / (Parking) / (Photo). 3. Tap the desired file to start playback. 4. During playback, you can: l While playing videos, tap / to play the previous/next video; tap / to play / pause the video. l While viewing photos, tap / to display the previous/next photo. l Tap to move the file to the “Event” category. l The "D" icon displayed next to the file on the playlist indicates that the video comes with a corresponding rear video. In this case, you can switch between the front and rear videos by tapping on the playback screen. Note: The video files recorded by the front and rear cameras will be saved separately in the corresponding folders of the memory card. If you move or delete a front video, its corresponding rear video will be processed synchronously.
Page: 16
16 l Tap to delete the file. l Tap to return to the list. Safety camera alerts Caution: For legal reasons, the safety camera function is not available in all countries. You can receive alerts to warn you about the locations of safety (speed) cameras which will enable you to monitor your speed through these areas. When a safety camera appears and is positioned in the detectable direction, you will receive alerts. The screen will display the visual alert and you will also receive audio warnings. Once the alert sound setting is set to Beep: l When your car approaches a safety camera, you will receive a normal beep alert. l When your car approaches a safety camera at a speed over the set threshold, you will receive a persistent beep alert until your car speed drops lower than the appropriate speed limit. l When your car passes through a safety camera, you will be notified by a different beep alert.
Page: 17
17 You can change the settings about how you want to receive the safety camera alerts. See the “System settings” section for information. Adding a safety camera Note: You can add a custom safety camera only when a GPS fix is established. Your dash cam allows you to customise the safety camera database. You can add up to 100 custom safety cameras in your dash cam. Follow the steps to configure a custom safety camera: 1. To add a custom safety camera in the current location, tap on the recording screen. 2. The next time when you pass by the location, you will receive alerts by the dash cam. 3. To view the information of the custom safety camera, tap > > > and then tap the safety camera that you want to check. 4. Tap to remove the custom safety camera from the dash cam. Updating safety camera data MiTAC does not warrant that all types and locations of safety camera data are available as cameras may be removed, relocated or new cameras installed. Occasionally, MiTAC may offer you updates of safety camera data. Visit the Mio website for available downloads and follow the instructions to complete update.
Page: 18
18 Getting connected MiVue Pro app The MiVue Pro app is an integrated application that allows you to share and back up the videos recorded on a MiVue dash cam via WIFI, and allows the dash cam to display the smartphone's notifications via Bluetooth. Search for "MiVue Pro" in Apple App Store or in Google Play Store to download the MiVue Pro app for free. Note: l The MiVue Pro app is compatible with iOS 9.0 (and above) and Android 5.0 (and above) devices. MiTAC does not guarantee the product’s compatibility with smartphones from all manufacturers. l Not all features are available for every model. Setting up a WIFI connection Note: This feature is not available for all models. The WIFI function allows you to connect the dash cam to your smartphone. The WIFI function is disabled by default. You can manually enable WIFI by tapping > > > . Once enabled, the WIFI setting screen displays the SSID and password of the dash cam. Follow the steps to set up the wireless network connection between the dash cam and your smartphone: 1. Enable the wireless network function of the smartphone. 2. On your smartphone, open the MiVue Pro app and follow the on-screen instructions to set up the connection. l The next time you use your smartphone to connect to the dash cam, you will not be prompted to enter the password again unless you reset your phone to the factory default settings.
Page: 19
19 l If you want to connect the dash cam to another smartphone, tap > > > to clear the current connection settings, and then repeat the steps above to set up the connection between the dash cam and the new smartphone. 3. You can check the WIFI connection status by the WIFI icon on the dash cam. The dash cam is connected to the smartphone and paired with the MiVue Pro app. The dash cam is not connected to the smartphone. The dash cam is connected to the smartphone but not paired with the MiVue Pro app yet. 4. On your smartphone, open the MiVue Pro app and keep it awake. You can now transfer videos by tapping on the recording screen of the dash cam. Setting up a Bluetooth connection Note: This feature is not available for all models. The Bluetooth function allows you to connect the dash cam to your smartphone. The Bluetooth function is disabled by default. You can manually enable Bluetooth by tapping > > > . Follow the steps to pair the dash cam with a smartphone that supports Bluetooth 4.0 or above. 1. Enable the Bluetooth function of the smartphone. 2. On your smartphone, open the MiVue Pro app and follow the on-screen instructions to start pairing. 3. Once the pairing is completed, your dash cam is ready to receive and display the notifications from the smartphone.
Page: 20
20 The Menu screen Tap to access the Menu screen that includes the following options: File Playback Plays the recorded videos and photos. Camera Enters the Camera mode. Connection Enables or disables WIFI ( ) and Bluetooth ( ) of the device. Record Sound Sets if you want to include sounds in the recordings. The default setting is On. Driving Safety The dash cam provides advanced driving safety functions to make your driving safer. l Calibration: Follow the steps to calibrate the system. 1. Drive the vehicle in the middle of the lane. 2. Ask a passenger to select this option and then follow the on-screen instructions to complete calibration. Please adjust your device to align the red line with the horizon, and the green line with the centre of the lane. Please align the blue line with the hood. Note: You are advised to calibrate the system constantly in order to be alerted properly.
Page: 21
21 l LDWS: Select Beep or Voice to enable the LDWS (Lane Departure Warning System) function. The system will alert you when it detects that the car speed is over 60 km/h and the car has strayed from its intended lane. l Headlight Reminder: Once enabled, the system will remind you to turn the lights on when you are driving after dark. The default setting is Off. l Driver Fatigue Alert: Once enabled, the system will remind you to take a break for a long-distance drive (2 hours, 3 hours or 4 hours). The default setting is Off. l Eco Drive Indicator: Once enabled, the system will display the Eco drive indicator on the screen. The colour of the indicator will change (red, yellow or green) depending on your driving status to remind you to drive more efficiently. The default setting is Off. l FCWS: Select Beep or Voice to enable the FCWS (Forward Collision Warning System) function. The system will alert you when the car moves slowly and gets too close to the car ahead. l Stop and Go: Once enabled, the system will alert you when the car ahead has proceeded to go after being stopped for longer than 10 seconds. The default setting is Off. Settings Allows you to change the system settings of the device. For more information, see the "System settings" section.
Page: 22
22 System settings To customise the system settings, tap > . Note: Depending on your MiVue model, certain setting options may not be available. SafetyCam l Alert Sound: Turns on (Beep or Voice) or off (Mute) the alert sound. l Alert Distance: The system will alert you at a preset distance (Short, Medium or Long) when a safety camera is detected. l Alert Method: Sets the alert distance function according to the current GPS car speed (Smart Alert) or the speed limit (Standard Alert). l Threshold: Sets the speed value for the dash cam to start offering alerts. l Cruise Speed Alert: Sets the limit for the cruise speed. When you drive at a cruise speed over the set value you will receive alerts by the dash cam. l Custom SafetyCam: Lists all custom safety cameras which are sorted by the created time. Parking mode l Detection: When enabled the dash cam will automatically start recording when it detects movements or if an event happens in Parking mode. l Detection Method: Sets the parking detection method to G-Sensor, Motion or Both. l Auto Entry: Sets the mode (Easy, Medium, Difficult or Manual) for the system to enter Parking mode automatically. l Motion Detection: Sets the sensitivity level of motion detection to Low, Medium or High. l G-Sensor Sensitivity: Sets the sensitivity level (Low, Medium or High)
Page: 23
23 of the G sensor that allows automatic triggering of the parking recording when the dash cam is in Parking mode. Video Recording l Video Clip Length: Sets the length of each video clip for a continuous recording (1 min, 3 min or 5 min). l Frequency: Sets the frequency to match the flicker frequency of the local power supply when recording. l WDR: Enables the WDR (Wide Dynamic Range) function to improve the dash cam's image quality under high-contrast lighting conditions. l EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image. The default setting is 0. l G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High) of the G sensor that allows automatic triggering of the event recording while continuous recording is in progress. l Stamps: Sets the information (Coordinates or G-Sensor) that will be displayed on the recorded video; select Hide all and the information will not be displayed. l Speed Stamp: Displays the driving speed on the recorded video. l Text Stamp: Displays customisable text information. System l Satellites: Displays the status of the GPS/GLONASS signal reception. You can tap and then select GPS or GLONASS for better signal reception if the need arises. l Date/Time: Sets the system date and time. For more information, see the "Setting the date and time" section. l Welcome Sound: Enables or disables the notification sounds during start-up.
Page: 24
24 l System Sound: Enables or disables system notification sounds. l Volume: Adjusts the volume level. l LCD Standby: Selects Always On to keep the LCD on; or sets the timer for the LCD to turn off automatically (10 sec, 1 min or 3 min) after recording starts. Selecting Standby will turn off the LCD (in specified time) but still display the time and speed information. l Language: Sets the language. l Distance Unit: Sets the preferred distance unit. l Storage Allocation: The system provides 3 default memory configurations to store the videos and photos. Select the proper configuration based on your usage. l AV-out Format: The options are NTSC and PAL. l Restore to Defaults: Restores the system settings to the factory defaults. l Version: Displays the software information. Format: Formats a memory card. (All data will be erased.)
Page: 25
25 MiVue Manager MiVue Manager™ is a tool for you to view the videos recorded on a MiVue dash cam. Note: Not all features are available for every model. Installing MiVue Manager Download MiVue Manager from the Support page of Mio website (www.mio.com/ support) and follow the on-screen prompts to install it. Make sure to download the correct software version (Windows or Mac) according to your computer's operating system. Playing the recording files 1. Remove the memory card from the dash cam and access the card on the computer via a card reader. You are advised to copy the recording files to your computer for backup and playback. 2. Start MiVue Manager on the computer. l By default, MiVue Manager shows the calendar and the file list on the right. l When a recording file exists, you will see the date marked with “ .” Click that date to display the files that were recorded on that date. l You can select the file type to display: Event / Normal / Parking. l To display all files in the current folder, click All. To return to the calendar view, click Calendar. 3. Double-click the desired file on the file list to start playback. 4. The playback controls are described as follows: 1 2 3 4 5 6 7
Page: 26
26 1 Skips to the previous / next file on the list. 2 Starts or pauses the playback. 3 Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x. 4 Mutes or unmutes the volume. 5 Adjusts the volume level. 6 Plays the video in full screen. 7 Displays the playback progress. You can click on a point along the track bar to move directly to a different location for the playback. 5. During playback, you can view more driving information from the dashboard panel and the G sensor chart that are displayed below the video playback screen. l On the dashboard panel, click to display the map screen. l The G sensor chart displays data in 3-axis waveform about the car’s shift forward/backward (X), to the right/left (Y) and upward/downward (Z). Note: The map screen may not display when the computer is not connected to the Internet or when your MiVue model does not support the GPS function. 6. The tool bar allows you to do the following: 1 2 3 4 5 6 7 1 Selects the folder that stores the recording files. 2 Previews and prints the current video image. 3 Saves the selected files to the specified location on your computer. 4 Captures and saves the current video image to the specified location on your computer.
Page: 27
27 5 Opens the Settings Menu. The Settings items are described as follows: l Change Language: Sets the display language of MiVue Manager. l Change Skin: Sets the colour scheme of MiVue Manager. l Check for Update: Checks if there is any new version of MiVue Manager. (Internet access is required for this feature.) l About: Displays the version and copyright information of MiVue Manager. 6 Exports the GPS information of the selected file in the KML format to the specified location on your computer. 7 Uploads the selected file to Facebook / YouTube™. For more information Caring for your device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage. l Keep your device away from excessive moisture and extreme temperatures. l Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. l Do not place anything on top of your device or drop objects on your device. l Do not drop your device or subject it to severe shock. l Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use. l The screen surface can easily be scratched. Avoid touching it with sharp objects.
Page: 28
28 Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. l Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. l Do not use paper towels to clean the screen. l Never attempt to disassemble, repair or make any modifications to your device. Disassembling, modifying or any attempt to repair could cause damage to your device, may inflict bodily harm or damage to property and will void any warranty. l Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. l To discourage theft do not leave the device and accessories in plain view in an unattended vehicle. l Overheating may damage the device. Safety precautions About charging l Use only the charger supplied with your device. Use of another type of charger may result in malfunction and/or danger. l This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 1.0 A (MiVue 785) or 2.0 A (MiVue 766/786/788). About the charger l Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet. l Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case.
Page: 29
29 l Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. l Do not use the charger if the cord becomes damaged. l Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery CAUTION! This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns do not disassemble, crush, puncture or dispose of in fire or water. l Use a specified battery in the equipment. l Important instructions (for service personnel only) l Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. l Replace only with the same or equivalent type recommended by the manufacturer. l The battery must be recycled or disposed of properly. l Use the battery only in the specified equipment. About GPS l GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any change to the GPS system can affect the accuracy of all GPS equipment. l GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or building, GPS positioning is not available. Signal reception can be affected by situations such as bad weather or dense overhead obstacles (such as trees, tunnels, viaducts and tall buildings). l The GPS positioning data is for reference only.
Page: 30
30 Regulatory information For regulatory identification purposes: l MiVue 785 is assigned a model number of N568. l MiVue 766/786 is assigned a model number of N568-725. l MiVue 788 is assigned a model number of N568-735. Products with the CE marking comply with the Radio Equipment Directive (RED) (2014/53/EU) - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards: EN 55032: 2012 + AC: 2013 EN 55024: 2010 and CISPR 24: 2010 EN 61000-4-2: 2009 and IEC 61000-4-2: 2008 EN 61000-4-3: 2006 + A1: 2008 + A2: 2010 and IEC 61000-4-3: 2006 + A1: 2007 + A2: 2010 EN 61000-4-4: 2012 and IEC 61000-4-4: 2012 EN 61000-4-5: 2006 and IEC 61000-4-5: 2005 EN 61000-4-6: 2009 and IEC 61000-4-6: 2008 EN 61000-4-8: 2010 and IEC 61000-4-8: 2009 EN 61000-4-11: 2004 and IEC 61000-4-11: 2004 EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.1 (2017-02) EN 301 489-3 V2.1.1 (2017-03) ETSI EN 300 328 V2.1.1
Page: 31
31 EN 303413 V1.1.0 IEC60950-1 (ed.2); am1; am2 EN 50498: 2010 (ISO 7637-2: 2004) EN 62311: 2008 EN 62479-2010 The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. Declaration of conformity Hereby, MiTAC declares that this N568/568-725/568-735 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Bluetooth MiVue 788: Bluetooth DID D035854 WEEE This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.
Brand:
Mio
Product:
Dashcams
Model/name:
MiVue 786
Filetype:
PDF
Available languages:
English