Mio Cyclo Discover Palmanual

Cyclo™ Discover Pal User Manual

2 Welcome Thank you for purchasing this Cyclo. Please read this manual carefully before using your Cyclo for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Bold — Components or items displayed on screen, including buttons, headings, field names and options. Disclaimer Not all models are available in all regions. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. The screenshots and other presentations shown in this document may differ from the actual screens and presentations generated by the actual product. Mio operates a policy of ongoing development. Mio reserves the right to make changes and improvements to any of the products described in this document without prior notice. Mio does not warrant that this document is error-free. The screenshots and other presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. All such differences are minor and the actual product will deliver the described functionality as presented in this User Manual in all material respects. Copyright © 2021 MiTAC Digital Technology Corporation. Mio is either a registered trademark or trademark of MiTAC Digital Technology Corporation (“MiTAC”) and is used under licence by Mio Technology Limited. All rights reserved. All other trademarks and registrations are the property of their respective owners. Revision: R00 (07/2021)

3 Contents Welcome Important information for using the manual......................2 Disclaimer.........................................................................2 Copyright..........................................................................2 1. Knowing your Cyclo Main unit...........................................................................5 Accessories......................................................................5 Mounting the device on your bike.....................................5 Charging the battery.........................................................6 Operating basics...............................................................7 Using the POWER button..........................................7 Using the touch screen..............................................7 Main menu........................................................................7 System icons....................................................................8 Quick Settings...................................................................9 2. Getting started with your Cyclo Performing the initial start-up..........................................10 MioShare........................................................................10 Starting your tour............................................................ 11 NeverMiss™: Notifications of POI (Point of Interest)...... 11 Displaying/Hiding the notifications of POI................ 11 3. Planning your activity Using the Navigate wizard..............................................12 Navigating to Home.................................................12 Navigating to Favourite............................................12 Searching for a POI.................................................13 Searching for the cycling node network...................13 Searching for a location from the map screen.........13 Surprise Me....................................................................14 Fitness mode..................................................................15 4. Recording your activity Viewing the map screens................................................16 Viewing the dashboard screens...............................16 Locking/Unlocking the screens................................16 Recording.......................................................................17 Recording reminder.................................................17 Using the START/STOP button................................17 Auto-pause...............................................................17 Viewing the History.........................................................17 5. Getting connected Pairing with your smartphone.........................................19 Receiving notifications via Bluetooth.......................19 Using WIFI......................................................................20 Synchronising data via WIFI....................................20

4 6. WeJoin Creating activities...........................................................21 Joining activities..............................................................22 About WeJoin activities...................................................22 7. Customising your Cyclo User Profile.....................................................................23 Activity Profile.................................................................23 Connections....................................................................24 System............................................................................24 8. For more information Online support................................................................26 Caring for your Cyclo......................................................26 Troubleshooting..............................................................26 What is GPS?.................................................................27 IPX7................................................................................27 Safety precautions..........................................................28 Regulatory information....................................................28 WEEE.............................................................................29 End User License Agreement.........................................29

5 1. Knowing your Cyclo Main unit 1 3 4 5 6 7 8 9 10 2 1 Barometer sensor 2 Light sensor 3 POWER button • Turns the device on/off. • Locks/Unlocks the map screen. • Backs to the Main menu. 4 Touch screen 5 LOCATION button Saves the current location as Favourite. 6 START/STOP button Starts/Stops an activity recording. 7 Micro-USB connector Connects the USB cable. 8 Bike mount socket 9 Speaker 10 Lanyard hole Accessories Your Cyclo comes with the following accessories. To use the device on a bike, ensure you use the specific bike mount kit that came with the device. Mio may provide optional accessories for specific models. Please visit Mio website (www.mio.com) for information. • USB cable • Bike mount kit • Lanyard Mounting the device on your bike The bike mount kit is designed to fit different types of bike handlebars, allowing you to attach your Cyclo to the bike flexibly and securely.

6 Align the latch on the back of the device with the slot on the bike mount, and then rotate the device clockwise to lock the device to the bike mount. You can choose to mount the device on the handlebar or on the stem. See the following figure for the examples of mounting the device. 3 4 3 4 ✎  To remove the device from the bike mount, rotate it counterclockwise. Charging the battery Your Cyclo has an internal battery that may not be fully charged when you purchase it. You should charge the battery for at least 8 hours before you start using it for the very first time. To charge the battery, use the supplied USB cable to connect the device to a computer, USB charger or power adapter (5V/2.0A; not supplied). ✎  Caution! For optimal performance of the lithium battery, note the following: • Do not charge the battery where the temperature is high (e.g. in direct sunlight). • Failure to follow the battery usage instructions could cause damage to the device, battery and even bodily injury or property damage and will void the warranty. • When storing the product for a long period of time, charge the battery to 50% – 80% capacity to prevent excess discharge.

7 Operating basics Using the POWER button Press and hold the button for 3 seconds to turn on your Cyclo. 3 SEC When the device is turned on, press and hold the button for 3 seconds to pop up the Power Off screen. Tap to turn off the device or to continue operating the device. ✎ Press and hold the button for 8 seconds to power off the device if it is not responding. Using the touch screen To operate the device, touch the screen with your finger(s). You can perform the following actions: Tap: Quick touch the screen once to open menus or select on-screen button/option. Swipe: Drag your finger vertically or horizontally across the screen. Two-finger gestures: Move your fingers apart or together on the screen to zoom in or out the map screen. Main menu The Main menu is your starting place for various tasks, providing quick access to applications and settings. • Swipe left or right to display more features. • Tap a button to start a task or open another menu. Select the Activity Profile (such as Walk, City bike, MTB, Race bike, etc.) based on your current activity. The Tours includes the planned routes from the websites, giving the best experience for cycling.

8 The Map displays the view of functions, including the map and navigation screens. The WeJoin allows you to share and enjoy the tour together with the group members. Based on distance or time, the Surprise Me will plan 3 routes for you to choose from. Use the Navigate wizard to plan your route by selecting the locations, such as Home, POI, Node Network, etc. Your trip/fitness can be saved in the History records. When your ride is finished, you can check the history data such as date/time, distance, speed, altitude, etc. The Fitness lets you set exercise by entering your goals, such as by distance, by time or by calories. The Settings provides various customisation options available to enhance your riding experience. System icons Various System icons in the title bar at the top of the screen provide the status information of the device. Depending on your settings, the icons may be different to provide various information of the device. Please note that these icons will not be always displayed during your trip/fitness. 1 2 3 4 5 6 7 1 Activity profile The displayed icon may differ depending on the selected activity type: : Walk : Race bike : Tour bike : City bike : Gravel bike : E-MTB : MTB : Trekking bike : E-Bike 2 Bluetooth status When the Bluetooth function is enabled: : Not connected. : Connected. 3 WIFI status The WIFI signal icon indicates the WIFI status: : Not connected. : Connected (the more bars the stronger the signal). 4 Time display Displays the current time. The device will automatically set the correct time based on the current GPS fixes. 5 Recording status : The device is recording your trip/fitness. : Recording has been paused. 6 GPS signal Once the device is turned on, it will search for satellite signals automatically. This may take several seconds depending on the location. When GPS is fixed, the GPS signal icon indicates the GPS status (the more bars the stronger the signal).

9 7 Battery status The Battery icon indicates the remaining battery power. Quick Settings Some frequently used settings can be found in Quick Settings. To open Quick Settings, simply swipe down on the Main menu screen. Swipe left to show the notifications (if have).   • Tap an item to turn the function on/off or to change its setting. • Drag the slider of Brightness ( ) to the left/right to decrease/increase the screen brightness. When you select Auto ( ), the system will adjust the screen brightness level automatically according to the surrounding brightness. • Swipe right or left (or tap / ) to access more features. • Swipe up (or tap ) to hide the Quick Settings.

10 2. Getting started with your Cyclo Performing the initial start-up Press and hold the POWER button for 3 seconds to turn your Cyclo on. When you power on your Cyclo for the first time, follow the on- screen prompts to complete the start-up sequence, including: • Personalise your Cyclo; and • Install the MioShare App on your smartphone to complete the pairing and then connect to your MioShare account via the app.  On your smartphone, launch the MioShare App and sign in with your MioShare account. Select Discover Pal and then follow the on-screen prompts to start pairing and register the device to your MioShare account     ✎  If you skip downloading the app and do not complete the pairing during the start-up sequence, you can use the smartphone to search for “MioShare” in Apple App Store / Google Play Store and download the app. On your Cyclo, go to Settings > Connections > Phone > Pair Phone (the device enters the pairing mode) and then try again. MioShare By using MioShare™, you can easily create or search a tour for your Cyclo to navigate. It stores your cycling data for you to view online or synchronise with other third-party services. For more information, visit: http://mioshare.com/ Step 1. Planning your tour. Go to MioShare (www.MioShare.com) to plan your tour by: • Creating your own route; or Save MioShare Explore Create Link my account RouteYou MioShare Account Synchronisation settings • Downloading a route file from the third-party. Save MioShare Explore Create Link my account RouteYou MioShare Account Synchronisation settings Step 2. Downloading the route. Once you register your Cyclo on MioShare, you will be able to use WIFI to download files wirelessly. ✎  To learn how to connect your Cyclo to a WIFI network, see the “Using WIFI” section.

11 Starting your tour The Tours lists the routes that you created by MioShare or other third-party websites. You can download the routes wirelessly. Refer to the “Using WIFI” section to complete the settings. Once you download the routes from MioShare or the third-party websites (such as komoot, RouteYou, etc.), tap on the Main menu to start your tour with your Cyclo. ...   NeverMiss™: Notifications of POI (Point of Interest) The NeverMiss™ function allows you to enjoy your cycling without missing any POI (Point of Interest) during the trip. ✎  From the downloaded route list, select the NeverMiss tab ( ) and you can quickly find all the routes including POIs data. This feature is available only for the routes downloaded from MioShare and RouteYou. Go to Settings > System > Sound > Spots remind to enable the NeverMiss™ function. • When you download the route with POIs, you will get notifications as you approach the defined points. • If the POI contains a link providing more information, scan the pop-up QR code by using your smartphone and get the details of the POI.  ✎  Make sure that the smartphone is Internet-enabled. Displaying/Hiding the notifications of POI You can set your Cyclo to display or hide the notifications of POI during the trip. 1. Tap Tours on the Main menu and then choose the desired route from the downloaded routes list. 2. Tap / to display the POI list screen.  • Tap the POI to check the information of the defined point. • Tap the switch button next to the POI to display ( ) or hide ( ) the notifications.

12 3. Planning your activity Using the Navigate wizard The device is equipped with maps that provide street-level detail for navigation, including POIs (Point of Interest) such as bike stores, restaurants, points of emergency, and more. The Navigate wizard allows you to search the location easily. To access the Navigate wizard, tap on the Main menu.  By using the wizard, there are several ways to select your destination. For example, you can select POI to find a POI (Point of Interest) quickly. When searching is complete, the searching result screen displays the information of the route (e.g. the total distance, elevation plot, and more). From the searching result screen, you can do one of the following: • Judge the difficulty level of the route by the icon (the more icons the more difficult the route). • Tap / to zoom in/out the elevation plot. Tap / to scroll through the plot when it is zoomed in. • Tap to display the route to the destination. • Tap (if available) to add the location to Favourite. • Tap to start navigating. Navigating to Home  You can edit the Home location via the MioShare App: Settings ( ) > Favourite Location > Home. The Home location will be updated when the device is connected and synchronised with your smartphone. Once your home location has been set on the device, simply tap on the screen and you will be directed to Home quickly. Navigating to Favourite  The Favourite has all your saved locations. The device will display a list of your previously saved destinations. Tap the Sort by button at the bottom of the screen to change the sorting order of the entries: / : by name; : by saved time.

13 Searching for a POI  POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as bike stores, restaurants, shopping centres, and more. Tap Search Range and then select Nearby or City: • Nearby: Search for the POIs around your current position. • City: Search for the POIs in the selected city. Searching for the cycling node network  In the areas where have the cycling node system (e.g. Netherlands and Belgium), plan your tour by using the cycling node numbers. 1. Tap Search Range and then select the Country, Province and City/Town based on your location. ...    2. Tap Type In to input the numbers that you can find on the magazines, website or maps. ...   To delete the node during searching, tap and then select the number you want to remove. Please note that the node(s) after the selected number will be highlighted and then removed simultaneously in order to replan the route properly. Tap to remove the highlighted nodes.  3. When done, tap to create your route. Searching for a location from the map screen  You can set the destination simply by pointing to it on the map screen.

14  Surprise Me The device features the Surprise Me™ function that will offer you up to three exciting routes around your location. If you’ve already taken a route from the same location, the device will try to propose you different routes, based on the possible and available roads around your current location. This way you will always be offered different routes to choose. Tap on the Main menu and then you can plan the routes randomly by selecting Loop, Favourite, POI or Point on map. ...   During the searching, you can: • Generate the route by Distance mode or Time mode. Distance mode Time mode Assign the desired amount of distance/time to ride in the Distance/Time field. While generating the routes using Time mode, you can set the estimated average speed of your trip in the Average Speed field. The device will calculate the estimated distance of it. • Do one of the followings on the searching result screen:  • Select one route by tapping / . The selected route is displayed by highlight colour. • Judge the difficulty level of the route by the icon(s). • Tap to view the general information of the route. • Tap to start navigating.

15 Fitness mode Cycling is a good aerobic fitness exercise that helps you to burn your calories, lose weight and increase your overall fitness. Tap on the Main menu and then you can set exercise by entering your goals: Distance, Time or Calories.  • When you select Distance or Time, you can enable Surprise Me to generate the route that gives the best experience of exercising. For more information about Surprise Me, see the “Surprise Me” section. • Tap to start your exercise. When you start the exercise, you can monitor the exercise status through the Dashboard screens. The device will notify you when you’ve reached your target. • To stop, tap from the Fitness screen.

16 4. Recording your activity Viewing the map screens To access the Map, tap on the Main menu. The system displays the map screen in 2 modes: • When navigation stops, the Where AM I screen displays your current GPS position with the location information in map view. • When navigation starts, the navigation screen displays and you will be directed to your destination by visual instructions. Where am I screen Direction and distance of next turn Current position Current speed Distance to go Current route POI Navigation screen Tap on the map screen briefly to display the on-screen buttons. • Tap / to zoom in/out the map. • You can navigate the map anywhere by dragging and then moving the map. While navigating the map, tap to display your current position on the centre of the map. • Tap to stop navigation. • Tap to avoid a certain distance of route ahead. Viewing the dashboard screens The Map also provides the extended dashboard screens that can be used to assist you in your travels. Tap / to display the dashboard screens.   ✎  The layout of the dashboard screens can be customised to display the information (e.g. speed, distance, time, calories, etc.) you want to know. To learn how to customise the dashboard screens, see “Dashboard” in the “Customising your Cyclo” section. Locking/Unlocking the screens The map screens can be locked by briefly pressing the POWER button. When the screen is locked, you can only change the display of dashboards by swiping the screen left or right. Press the POWER button again to unlock the screen.

17 Start recording Recording reminder When the navigation starts, a message will display asking if you want to start recording when movement is detected. Tap START to start recording. When you are recording the route, the recorded track will be displayed as the red dot line on the map.   Recorded track (red dot line) ✎  You can enable or disable the Recording reminder function: Settings > System > Recording > Recording reminder. Using the START/STOP button When the navigation is in progress, you can start recording by pressing the START/STOP button on the device. To stop/pause the recording, press the button again and then tap / when prompted. Tap to continue recording. When recording is paused, press the button again and then tap to resume recording. Auto-pause When the Auto-pause function is enabled, the system will detect your movement and automatically pause recording when you are taking a rest during the activity. To resume recording, press the START/STOP button and then tap .  ✎  You can enable or disable the Auto-pause function: Settings > System > Recording > Auto-pause. Viewing the History The device will save the history as the timer starts. When you stop recording, the Summary screen displays statistics about the recorded data. Tap to save the recording, or tap to discard the recording. 

18 Information in History includes date, time, distance, average speed, altitude, and more. To view the history data, tap on the Main menu and then select an entry from the list.   • Tap the entry to view details of the record. • Tap to start navigating the recorded track. • Tap to select and then delete the entry. ✎  You can get the details of the history information on the MioShare App once the data is synchronised.

19 5. Getting connected Pairing with your smartphone Your Cyclo can be connected with your smartphone via Bluetooth. 1. On your Cyclo, go to Settings > Connections > Phone to enable the Bluetooth function. Tap Pair Phone. The device enters the pairing mode.   2. On your smartphone, start the MioShare App and sign in with your MioShare account. Go to Settings ( ) > Device management and tap Add to select the device (e.g. Discover Pal) to connect. Follow the on-screen prompts on the smartphone and your Cyclo to complete the pairing. ...  ✎ To pair your Cyclo with another smartphone, tap Forget phone at the bottom of the Phone screen and then repeat the procedure of pairing. Receiving notifications via Bluetooth Depending on the phone type/model, you may need to turn on the phone’s notification option of the app: Settings ( ) > Device management > Notifications. ✎  You may also need to change the notification settings for certain apps when you want to receive notifications from them. The settings may vary by apps. When the device is connected to the smartphone, you will be notified when there is an incoming call or a message. You can check the notifications in the Notifications list of Quick Settings.  ✎  Depending on the phone type/model, the incoming call number may not be displayed on the notifications. 

20 Using WIFI You can synchronise data (e.g. upload recordings and download saved tours) with MioShare by accessing the Internet through WIFI (wireless local area network). WIFI allows the device to connect to the Internet through a wireless connection. 1. On your Cyclo, go to Settings > Connections > WIFI to enable the WIFI function.  2. To use WIFI of the device, you need to access to a wireless access point via the MioShare App. On your smartphone, start the MioShare App and complete the pairing between your Cyclo and the smartphone. When connected, go to Settings ( ) > Device management > WIFI to search for available wireless networks. Select a network to connect. The network names and security settings (public network or secured with WEP/WPA-PSK/WPA2-PSK) of the detected wireless networks will be displayed on the WIFI settings screen. The next time when you enable WIFI function, it will connect to a previously accessed network automatically. ✎ The instructions about operating the smartphone are for reference only. The actual setting options and methods may vary depending on your phone type/model. Synchronising data via WIFI When the device is connected to a wireless network, tap Sync on the WIFI screen to start synchronising data with MioShare. ✎  You need to register the device on MioShare (by adding the device via the MioShare App on smartphone) before using WIFI to synchronise data.  ...

21 6. WeJoin EXPERIENCE GROUP RIDE FOR FREE! Your Cyclo features the WeJoin™ service that lets you share your tour with friends. It will give you the best experience for group riding. ✎  Before using WeJoin on you Cyclo, make sure that you have upgraded it to the up-to-date software version: Settings > System > Product Info > Check for Update. Creating activities 1. Connect your Cyclo with your smartphone via the MioShare App. Make sure that the smartphone is Internet-enabled. 2. On your smartphone, go to WeJoin ( ) > Groups > Create Group to set up a group and then add members. Do one of the followings to add members in the group: • Scan the QR code of nearby friends. • Search for ID or email account’s name of the friend remotely. For quick and accurate searching, make sure to add the “@” symbol (e.g. “name@”) when you search for an email account’s name. ✎ You can create a group only when you use a Cyclo Discover Pal.   3. On your Cyclo, tap WeJoin on the Main menu and then follow the on-screen instructions to complete the settings. ✎ You can create and share an activity only when you use a Cyclo Discover Pal. Sharing your route. Start the group riding.   Select the group to join. ... Plan your route (by Surprise Me, Tours, etc.).    4. When done, you can enjoy the tour together with the group members.

22 Joining activities 1. Download the WeJoin activities while you are invited via the MioShare App. 2. Accept the invitation and then you can enjoy the tour together with the group members. ...   ✎ You can also use the MioShare App to enjoy WeJoin cycling: taking photos, collecting records, sharing memories, etc. See the app’s Help & Tips for more information. About WeJoin activities • The WeJoin activity will last for 48 hours since it was created. You can manually end the activity which is created by you; otherwise, the activity will automatically end after 48 hours. • During the WeJoin activity, make sure that your Cyclo is connected to the smartphone via the MioShare App, and the smartphone is Internet-enabled. • With your Cyclo, you can easily navigate the tour by visual instructions such as turn-by-turn navigation. ✎ The turn-by-turn navigation is available only when you use a Cyclo Discover Pal. The members without using Cyclo device can navigate the tour by following the track on the MioShare App. All the members joining the activity will be displayed on the map screen of the Cyclo device and the MioShare App. The location of the members will be updated every 20 seconds. • On the MioShare App, you can tap to take photos during the tour. Navigation on MioShare Navigation on Cyclo

23 7. Customising your Cyclo ✎  Some settings of your Cyclo can be customised by using the MioShare App. The settings will be updated when the device is connected and synchronised with your smartphone There are various customisation options available to enhance your navigation and cycling experience. With the Settings menu, you will be able to customise the device such as the system settings, user profiles, map settings, and more. To access the Settings menu, tap on the Main menu.  • Swipe up/down to scroll through the menu screens. Tap to return to the previous screen. • When the settings have been changed, tap to complete and return to the previous screen. • Tap the switch button next to the option to change the setting status. : on/enabled : off/disabled User Profile The User Profile displays the personal data including Gender, Birth date, Height and Weight. Tap the desired entry to change its settings. Activity Profile The Activity Profile displays the activity type that you selected. The system will create different routes depending on the activity type. For example, Mountain bike will use unpaved routes which will be avoided by using Race bike. The system provides up to 9 activity types and you can customise the settings for each entry. Tap the desired entry to change its settings. : Walk : Race bike : Tour bike : City bike : Gravel bike : E-MTB : MTB : Trekking bike : E-Bike • Apply Profile Set the entry as your activity type. • Name Display the name of the entry. The name can be edited via the MioShare App. • Activity Type Set the activity type for the entry.

24 • Routing This setting allows you to set the routing preference by selecting Prefer, Allow or Try to avoid in each route option (Major roads / Bike trails / Node network / Unpaved roads / Cobblestone / Ferries / Walking routes). • Dashboard This setting allows you to change the layout of the following screens: NeverMiss / Elevation / Customise Info.   • Tap to change the sequence of the screens. • Tap Show screen to display or hide the Elevation and Customise Info screens. • Tap Layout & Data Fields to customise the screen layout. Tap / to remove or add the data field in the target screen. You can also change what data fields are displayed by double tapping on each individual data field and then select the desired option on the list. • Map This setting allows you to change the map features during navigating. Tap Auto zoom to enable or disable automatic zooming during navigation. When enabled, the map screen will automatically zoom in or out depending on your speed to allow optimal viewing of your route. Tap Orientation to select North up or Track up. When you select North up, it will display North at the top of the map screen. Tap Contours to enable or disable the contour map mode. Connections For more information of using Phone (Bluetooth) and WIFI (wireless local area network) features on your Cyclo, see the “Getting connected” section. System • Screen Drag the slider to the left/right to decrease or increase the screen brightness. If Auto is selected, the system will automatically optimise the brightness level of the device based on the available light around you. Tap Backlight Off Timer to select how long (from 10 seconds to Never) the display screen remains lit after a period of inactivity. Tap Screen Lock Timer to select how long of inactivity (from 5 seconds to Never) will lock the map screens. Tap Auto Power Off Timer to select how long of inactivity (from 10 minutes to Never) will turn off the device automatically. • Units Select Metric or Imperial according with your preferences.

25 • Sound Tap Instructions to enable or disable the sound while getting instructions. Tap Auto Recording to enable or disable the sound while auto recording starts. Tap Spots remind to enable or disable the notifications of POI during the trip. • Recording The Recording reminder is a GPS-based feature and it may be affected by the GPS signal reception. When enabled, a message will display asking if you want to start recording when movement is detected. The Auto-pause is a GPS-based feature and it may be affected by the GPS signal reception. When enabled, the system will automatically pause recording when you are taking a rest during the activity. • Date & Time The device will display the date and time based on the current GPS location. This option lets you set the date/ time format. Tap Date Format to select the displayed date format: Day/ Month/Year, Month/Day/Year or Year/Month/Day. Tap Time format to set the displayed time format as 12- hour or 24-hour by selecting 24H or AM/PM. • Language Select the preferred language displayed for the menus and other interface features while operating the device. • Device Reset You can reset the device to the factory default settings by tapping Back to factory. When you select the function, all of the recorded data on the device will be cleared. You can also just restore factory default settings by tapping Restore Default, which allows you to restore default settings but will not delete the recorded data. To delete the recorded data only, tap Remove all recordings. • Product Info Tap Check for Update to check if there is any update available. Please note that the Internet access is required for this feature. Tap About to display the version and general information of the device. Tap EULA and Copyright info to view the End User License Agreement and copyright information.

26 8. For more information Online support For 24/7 help and support with Mio products, visit our Technical Support website at: https://support.mio.com/contacts Caring for your Cyclo Taking good care of your Cyclo will ensure trouble-free operation and reduce the risk of damage to your Cyclo: • Keep the device away from excessive moisture and extreme temperatures. • Avoid exposing the device to direct sunlight or strong ultraviolet light for extended periods of time. • Do not place anything on top of the device or drop objects on the device. • Do not drop the device or subject it to severe shock. • Do not subject the device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage the device. In the event of moisture condensation, allow the device to dry out completely before use. • The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. • Never clean the device when it is turned on. Use a soft, lint- free cloth to wipe the screen and the exterior of the device. • Do not use paper towels to clean the screen. • Never attempt to disassemble, repair or make any modifications to the device. Disassembly, modification or any attempt at repair could cause damage to the device and even bodily injury or property damage and will void any warranty. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the device, its parts or accessories. • Do not expose the device to extreme heat or direct sunlight for prolonged periods. Overheating may damage the device. Troubleshooting Problem Solution The device does not turn on when using battery power. The remaining battery power may be too low to run the device. Charge the battery. Screen responds slowly. Make sure that the device is not running out of battery power. If the problem still persists, restart the device. Screen freezes. Restart the device. If the device stops responding, you may need to shut down the device by pressing and holding the POWER button for 8 seconds in order to force a device reboot. Screen is hard to read. Make sure that the backlight of the display is set to a high-enough brightness. ✎  If you encounter a problem you cannot solve, contact an authorised service centre for assistance.

27 What is GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilised by GPS receivers, such as the device, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or “GPS fix” (latitude and longitude), for vehicle navigation systems. The device receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure the device is outdoors or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception. • It is your sole responsibility to place, secure and use the device in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. • On main roads, the distance to an exit calculated by the device may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while the device shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. • Mio products are designed to be used as an aid to safer driving. Mio does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Mio accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Mio does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Mio is not responsible for any damages of any type. In some countries the data information regarding speed limits may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk. • Do not operate the device while driving or riding a bike. Using this product does not change the requirement for a driver or a bike rider to take full responsibility for his or her behaviour. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. IPX7 The IEC 60529/IPX7 is a European system of test specification standards for classifying the degrees of protection provided by the enclosures of electrical equipment. An IPX7 designation means that the unit withstands immersion in one meter (approx 3ft) of still water for up to 30 minutes. Mio guarantees this grade provided the battery door and all jack covers are properly and securely closed. Mio Cyclo is not IPX8 grade; water-pressure such as washing the unit with running water may cause damage to the unit and voids warranty. Because of possible user resealing error, this product is not warranted against waterproof housing leakage or any resulting damage. Please make sure the waterproof cover is tightly closed before using the product.

28 Safety precautions About charging • Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. • This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 2.0 A. • Use a specified battery in the equipment. About the charger • Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet. • Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case. • Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. • Do not use the charger if the cord becomes damaged. • Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery • Use a specified battery in the equipment. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture or dispose of in fire or water. • Important instructions (for service personnel only) • Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. • Replace only with the same or equivalent type recommended by the manufacturer. • The battery must be recycled or disposed of properly. • Use the battery only in the specified equipment. Regulatory information For regulatory identification purposes, Mio Cyclo Discover Pal is assigned a model number of N681. Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this section. Some notices apply to specific models only. Products with the CE marking comply with the Radio Equipment Directive (RED) (2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) - issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards: • EN 300328 • EN 303413

29 • EN 301489-1 • EN 301489-17 • EN 301489-19 • EN 55032 • EN 55035 • EN 61000-3-2 • EN 61000-3-3 • EN 62368-1: 2014 + A11:2017 • EN 62311 • EN 50665 The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. Declaration of Conformity Hereby, MiTAC declares that this N681 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. WEEE This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (2012/19/EU). Instead, it should be disposed of by returning it to the point of sale or to a municipal recycling collection point. End User License Agreement You should read the following terms and conditions of this Agreement (“Agreement”) carefully before using this Mio Cyclo device, its accessories and any other accompanying items (“Product”) that includes licensed products, including but not limited to software, digital map data or other data and services (“Software”) licensed by MiTAC Digital Technology Corporation and its affiliates (collectively, “Mio”) to be used only, as set forth below. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PLEASE DO NOT USE THIS PRODUCT AND DO NOT COPY ANY SOFTWARE INSTALLED THEREIN. IN SUCH CASE, PROMPTLY CONTACT MIO OR ANY AUTHORIZED DEALER FOR INSTRUCTIONS TO RETURN THE UNUSED PRODUCT WITH ALL ACCOMPANYING ITEMS. SHOULD YOU HAVE PAID FOR THE PRODUCT OR THE SOFTWARE, MIO OR ANY AUTHORIZED DEALER MAY REFUND THE PURCHASE PRICE PROVIDED THAT YOU PROVIDE A VALID AND ACCEPTED PROOF OF PURCHASE AND PROOF OF PAYMENT. ANY USE OF THE PRODUCT OR SOFTWARE WILL CONSTITUTE YOUR ACCEPTANCE OF THIS AGREEMENT. GRANT OF LICENSE: This Agreement grants you a non- exclusive and revocable license to use the Software installed on the hardware device or any other storage medias (on only one hardware device at a time), for your internal business purposes or personal use. This Agreement does not imply or grant you any rights to future updates or upgrades of the Software unless expressly instructed by Mio in writing. Any updates or upgrades are governed by this Agreement and may be subject to additional payments and other conditions.

30 You may copy Software or any supporting and accompanying documentation (“Documentation”) for backup or archive purposes only and for the support of use of the Software as permitted hereunder. All such copies must reproduce and include all copyright notices and any other proprietary rights notice appearing on the Software and Documentation. The Documentation may contain multiple versions of this Agreement, including but not limited to multiple translations and multiple media versions. Even if you receive multiple versions of this Agreement, you are licensed to use only one copy of the Software. THE SOFTWARE LICENSED HEREUNDER MAY CONTAIN DEFECTS. YOU ARE ADVISED NOT TO RELY ON THIS SOFTWARE, TO SAFEGUARD IMPORTANT DATA, TO USE CAUTION AND NOT TO RELY IN ANY WAY ON THE CORRECT FUNCTIONING OR PERFORMANCE OF THE SOFTWARE AND ACCOMPANYING MATERIALS. The software is not designed or licensed for use in mission- critical applications, or in hazardous environments, requiring fail-safe controls, including without limitation operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, or life support or weapons systems. To the maximum extent permitted by applicable law, the Software is provided to you “AS IS AND WITH ALL FAULTS”, and Mio, its suppliers and licensors hereby disclaim any warranty, express or implied (either in fact or by operation of law), with respect to the Software, either as to merchantability, fitness for particular purpose, or any other matter. You acknowledge and agree that the Software has not been tested or certified by any government agency or industry regulatory organization or any other third party organization. In no event shall Mio, its suppliers and licensors be held liable for, liabilities or obligations for damages, including but not limited to special, indirect, or consequential damages or loss of use, revenue, or profits in connection with or arising out of this Agreement or any breach of this Agreement by Mio, its suppliers or licensors or the existence, furnishing, functioning, or any use of the Software. Any other representations or warranties made by any person, including employees or representatives of Mio, its suppliers and licensors, which are inconsistent herewith shall be disregarded by you and shall not be binding upon Mio, its suppliers and licensors, if any product model or sample was shown to you, such model or sample was used merely to illustrate the general type and quality of the product and not to represent that the Software would necessarily conform with such model or sample. NO ORAL OR WRITTEN ADVICE OR INFORMATION PROVIDED BY MIO, ITS SUPPLIERS AND LICENSORS OR ON THEIR BEHALF SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS LIMITED WARRANTY, AND YOU ARE NOT ENTITLED TO RELY ON ANY SUCH ADVICE OR INFORMATION. Any liability of Mio, its suppliers and licensors towards you shall be void if any damage to the Product is caused by accident, transportation, neglect or misuse, alteration (which shall include, but not be limited to, any deviation from the specifications), any unauthorized modification or enhancement of the Product, failure to maintain a suitable operating environment, or the use of the Product for other than the specific purpose for which it was designed. In no event shall Mio, its suppliers and licensors be liable for any third party materials, database and/or their content including the GUI and all other implications arising from such error or malfunction related to database. Provision of the Product under this Agreement shall not create any obligation for Mio, its suppliers and licensors to continue to develop, productize, support, repair, offer for sale or in any

31 other way continue to provide or develop software either to you or to any other party. RESTRICTIONS: You are not permitted to: analyze, modify, translate, adapt, reverse engineer, decompile, disassemble, or otherwise reduce the Software to a perceivable form; create derivative works based on the Software or any part thereof, or attempt to increase the functionality of the Software in any manner; copy or download the Software (except for backup purposes as stated above), reproduce through any electronic or mechanical means, and distribute copies – any unauthorized copying is expressly prohibited; rent, lend, resell, distribute, sublicense or otherwise transfer rights to the Software, in any other way than assigning the Product in meeting with below conditions; remove or obscure any copyright or proprietary notices or labels in the Software; perform, broadcast, display or present the Software in public. You shall not place, secure, or use, or permit any other person to place, secure, or use, the Product, the Software or any device associated with the Software, in a manner that limits any user or operator’s view, that is likely to distract any user or operator, or that may cause accidents, personal injury, or property damage. You, and any user that you permit to use the Product, the Software or any associated device, is solely responsible for observing safe driving, operating, and other practices so as to avoid accidents or injury to persons or property. The Software is the confidential information of Mio, its suppliers and licensors. You are not allowed to disclose the Software to third parties. The removal or obscuring of any copyright, trademark notice or restrictive legend of Mio, its suppliers and licensors is not allowed. NO ASSIGNMENT: You may permanently transfer all of your rights under this Agreement only as part of a sale or transfer of the Product for non-commercial purposes, provided you retain no copies and transfer all copies of the Software and the Documentation to the same party or destroy any such materials not transferred, and the recipient agrees to all of the terms of this Agreement. Any transfer must include all prior versions, updates and upgrades of the Software and the Documentation. Except as set forth above, you may not transfer or assign the Software, the Documentation or any of your rights under this Agreement. Mio reserves the right to deny technical support and other remedies with regard to the Product or the Software to any persons in association with transfers. EXPORT RESTRICTIONS: You accept to comply with all applicable international or national laws (of the European Union, the United States of America or other) that apply to the Product, including the Software and the Documentation, and shall not export or re-export the Product, the Software and the Documentation (or any copies thereof) or any product utilizing the Product, the Software or the Documentation in violation of any applicable laws or regulations to any person or entity in any country subject to such restrictions, or to any person or entity, wherever located, who intends to export or re-export to such country. For further information in relation to this restriction, please seek advice from the relevant governmental agencies. INTELLECTUAL PROPERTY RIGHTS: Mio or its suppliers or licensors, own all intellectual property rights in and to the Product, the Software and the Documentation, and any copies thereof regardless of the form or media. Except as expressly provided herein, this Agreement does not grant you any rights to patent, copyrights, trade secret, trademarks, or any other intellectual property rights. TERMINATION: This Agreement is effective as of the date of its acceptance until expired or terminated according to the terms of this Agreement. You may terminate this Agreement at any time

32 by destroying the Product, the Software and the Documentation together with all copies and merged portions in any form. This Agreement may be terminated immediately by Mio for any reason, including but not limited to any failure to comply with any term or condition of this Agreement. In such event, you must destroy the Product, the Software and the Documentation together with all copies and merged portions in any form. In addition, this Agreement shall terminate immediately upon the termination of the agreement between Mio and any third-party from whom Mio licenses Software. All rights granted to you by this Agreement shall cease upon termination including, but not limited to, all licenses granted hereunder. GOVERNING LAW: Except to the extent applicable law, if any, provides otherwise, this Agreement will be governed by the applicable law of the jurisdiction where Mio is located, excluding its conflict of law provisions. The United Nations Convention on Contract for the international Sale of Goods is hereby excluded in its entirety from application to this Agreement. LIMITED WARRANTY; LIMITED LIABILITY: EXCEPT AS SPECIFICALLY STATED IN THIS LIMITED WARRANTY OR OTHER APPLICABLE LAW IMPOSES WARRANTIES THAT MAY NOT BE DISCLAIMED, (A) THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT IS WITH YOU, (B) MIO MAKES NO WARRANTY AGAINST INTERFERENCE WITH ANY PERSON’S ENJOYMENT OF THE PRODUCT OR THE SOFTWARE OR AGAINST INFRINGEMENT, AND (C) MIO DOES NOT WARRANT THAT THE OPERATION OF THE PRODUCT OR THE SOFTWARE WILL BE CONTINUOUS OR ERROR-FREE. MIO WILL NOT BE LIABLE FOR ANY LOSS OF DATA. EXCEPT AS PROHIBITED BY LAW, MIO AND ITS SUPPLIERS OR LICENSORS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES OF ANY KIND, OR LOSS OF INFORMATION OR DATA, ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT, SOFTWARE AND DOCUMENTATION. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SEVERABILITY: In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the remaining provisions shall be still valid, legal and enforceable without being affected or impaired in any way and a valid, legal and enforceable provision of similar intent and economic impact shall be substituted therefore. ENTIRE AGREEMENT: This Agreement sets forth the entire understanding and agreement between you and Mio with respect to the Product, the Software and the Documentation, and supersedes all prior agreements and communications, whether orally or written thereof.