Miele DARC 6 manual

View a manual of the Miele DARC 6 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Miele
  • Product: Remote Controller
  • Model/name: DARC 6
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Danish, Norwegian, Finnish

Table of Contents

Page: 8
en - Contents
9
Warning and Safety instructions ........................................................................ 10
Overview and function......................................................................................... 11
Using the remote control ....................................................................................... 11
Signing on/off the remote control ...................................................................... 12
To activate/deactivate feature lighting .............................................................. 13
To activate/deactivate the height adjustment function ................................... 13
Cleaning and care................................................................................................ 14
Cleaning the remote control................................................................................... 14
Changing the battery ............................................................................................. 14
Page: 9
en - Warning and Safety instructions
10
To avoid the risk of accidents and damage to the cooker hood,
please read the instructions for your cooker hood carefully before
using it for the first time. They contain important notes on its safe‐
ty, installation, use and maintenance. Miele cannot be held liable
for any damage caused by non-compliance with these instruc‐
tions.
Keep these instructions in a safe place and ensure that all users
are familiar with the contents. Pass them on to any future owner of
the appliance.
 This remote control is for use with Miele cooker hoods only.
 Do not allow children to play with the remote control.
 Important information on handling the remote control battery:
– Do not short circuit or recharge the battery, or throw it into a fire.
Danger of explosion.
– Do not throw old batteries away with your general household
waste. Please dispose of them in a designated battery collection
and recycling system.
Page: 10
en - Overview and function
11
a LED light
b Hob lighting control
c Control for switching the fan off and
for selecting a lower power level
d Control for switching the fan on and
for selecting a higher power level
e On/Off control for feature lighting
(depending on cooker hood model)
f Run-on option control
g Controls for raising and lowering the
canopy
(depending on cooker hood model)
Using the remote control
The remote control can be used with
any Miele cooker hood which has the
Miele@home symbol  on the data
plate.
The main functions can be selected via
the cooker hood or by remote control.
The indicator light on the remote control
unit will light up briefly when a function
is selected by remote control.
Please see the description of functions
in the operating instructions for the
cooker hood.
Programming, e.g. of the operating
hours counter, can only be done from
the cooker hood controls.
The maximum operating range of the
remote control is approx. 10 m. Howev‐
er, this may be less depending on the
physical conditions present in the room
(e.g. furniture, walls).
The rear of the remote control unit is
magnetic which allows it to be attached
to various metal surfaces.
Page: 11
en - Signing on/off the remote control
12
The remote control must be signed on
so that it can be used.
Signing on and off must be done at the
same time on the cooker hood and the
remote control. Signing on/off mode
has to be accessed on the cooker hood
first, then on the remote control.
To access Signing on/off mode on
the cooker hood
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 Then press in turn,
– the "" control (1 sensor)*,
– then the "" control (IS sensor)*,
– then the lighting control .
 Then access the Signing on/off mode
on the remote control immediately.
To access Signing on/off mode on
the remote control
 Press both arrow controls  at the
same time and hold for about 5 se‐
conds until the remote control LED
flashes.
 Press the lighting control .
To start the signing on procedure
 In Signing on/off mode press the ""
control (IS sensor)* on the cooker
hood first and then the "" control
on the remote control.
The search for a signal will start. The re‐
mote control LED will flash steadily.
After approx. 30 seconds the remote
control LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
 Confirm signing on with the cooker
hood run-on option control 515. All
indicator lights will go out.
The remote control can now be used.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
To cancel the signing on procedure
 If it is not possible to sign on the pro‐
cedure can be cancelled by pressing
the run-on option control 515 on
the cooker hood and on the remote
control.
 The signing on procedure must then
be repeated. To do this the cooker
hood and the remote control must
first be signed off.
To sign off
 In Signing on/off mode press the ""
control (1 sensor)* on the cooker
hood and then the "" control on the
remote control.
The remote control LED will flash stead‐
ily.
Page: 12
en - Signing on/off the remote control
13
After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the flash‐
es. The remote control has now been
signed off. The LED will go out after a
short while.
 Confirm the signing off procedure by
pressing the run-on option control
515 on the cooker hood. All indica‐
tors will go out.
Please bear in mind that disabling the
signal will also disable any Con@ctivi‐
ty 2.0 function and this will have to be
activated again.
* for appliances with sensor controls
To activate/deactivate feature light‐
ing 
If your cooker hood has feature lighting
in addition to the hob lighting, e.g.
glass edge feature lighting, it can be
switched on and off using the remote
control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
same time and hold for about 5 se‐
conds until the remote control LED
flashes.
 Press the control for the feature ligh‐
ting .
 To activate press the "" control, to
deactivate press the "" control
Programming is completed automati‐
cally.
To activate/deactivate the height ad‐
justment function 
If your cooker hood has a motorised
height-adjustable canopy, this can be
adjusted using the remote control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
same time and hold for about 5 se‐
conds until the remote control LED
flashes.
 Press the button for the run-on option
.
 To activate press the "" control, to
deactivate press the "" control
Programming is completed automati‐
cally.
Page: 13
en - Cleaning and care
14
Cleaning the remote control
 Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the ca‐
sing.
Changing the battery
Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3 V CR
2032 battery.
The battery must be changed if cooker
hood functions can no longer be selec‐
ted using the remote control or if the
LED light on the remote control does
not light up, or only lights up dimly
when a control is pressed.
Cooker hood functions can still be se‐
lected using the cooker hood controls.
 Use a screwdriver to loosen the two
screws on the back and remove the
cover.
 Remove the old battery and replace
with a new one, making sure the po‐
larity is correct.
 Replace the cover.
 Dispose of the old battery responsib‐
ly.

Question & answers

My remote just stopped working. I replaced the battery. No luck. The LED light does flash when a command is pressed. I have multiple times tried the sign on/off procedure but still no luck. Anything else I can try. Just before it stopped working, the LED light flashed when pressed instead of the usual lighting up.

Published on 4 months ago by Alan Clark

Ask a question about the Miele DARC 6

Have a question about the Miele DARC 6 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Miele DARC 6. Please make sure that you describe your difficulty with the Miele DARC 6 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.