Miele CVA 5060 manual

View a manual of the Miele CVA 5060 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Miele
  • Product: Coffee maker
  • Model/name: CVA 5060
  • Filetype: PDF
  • Available languages: English, Dutch, French, German, Swedish

Table of Contents

Page: 0
Operating and installation instructions
Built-in coffee machines
CVA 5060
CVA 5068
To avoid the risk of accidents
or damage to the machine,
it is essential to read these
instructions before it is installed
and used for the first time. M.-Nr. 07 816 860
en - AU, NZ
Page: 1
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessories supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the coffee machine - first steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Filling the water and coffee bean containers . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Making drinks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pre-warming cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the height of the central spout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Preparing espresso and coffee from freshly ground beans . . . . . . . . . . . . . . . . . 19
Double portion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 20
Adding ground coffee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
To make a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To cancel preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cappuccino, latte macchiato, hot milk, milk froth. . . . . . . . . . . . . . . . . . . . . . . 22
User profile drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
After use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting the coffee grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Contents
Page: 2
Settings: customising your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Selecting a language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Coffee jug (making several cups one after the other) . . . . . . . . . . . . . . . . . . . . . . 30
Setting the amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting Pre-brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting Automatic rinsing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the Steam system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lighting: Setting the brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Lighting: Setting the switch-off time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Info (showing the number of drinks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Safety (Activating the System lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To activate or deactivate the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To override the System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting the volume (keypad tone, buzzer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Resetting the factory default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Miele|home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Programming the amount: setting the portion sizes . . . . . . . . . . . . . . . . . . . . 39
Programming the amount of espresso, coffee, hot milk and milk froth
via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Programming the proportions for cappuccino or latte macchiato
via the OK sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Programming the amount for hot water via the Hot water sensor . . . . . . . . . . . . . 41
Programming the amount via "Settings". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting up User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Selecting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Creating a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changing a User profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Deleting a User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Revert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Contents
Page: 3
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Rinse the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Milk pipework. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Rinse milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Clean milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Clean milk pipework of any blockages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
The central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Interior and machine door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Degreasing the brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
To run the descaling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Adjusting the door hinges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Contents
Page: 4
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Disposal of your old appliance
or machine
Electrical and electronic appliances /
machines often contain materials
which, if handled or disposed of
incorrectly, could be potentially
hazardous to human health and to the
environment. They are, however,
essential for the correct functioning of
your appliance or machine. Therefore,
please do not dispose of your old
machine or appliance with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre and ensure that it presents no
danger to children while being stored
for disposal.
It should be unplugged or disconnected
from the mains electricity supply by a
competent person.
The plug must be rendered useless
and the cable cut off directly behind the
appliance or the machine to prevent
misuse.
Caring for the environment
5
Page: 5
Exterior view
aOn/Off sensor for switching the coffee machine on and off
bDisplay
cLeft arrow, for scrolling through the various programme options
dOK sensor, for confirming the selection of a programme option and for saving a
setting
eRight arrow, for scrolling through the various programme options
fSensor for selecting hot water
gDoor grip
hHot water spout
iLighting
jDrip tray cover
kCentral spout, height-adjustable
lStainless steel milk flask
Guide to the machine
6
Page: 6
Interior view
aMaster switch
bGround coffee chute cover
cGround coffee chute
dSlide control to select fineness of ground coffee
eCoffee bean container
fDrip tray with grid for easier carrying
gWater container
hBrew unit
iWaste container
jCentral spout connector (connecting the brew unit and the central coffee spout)
kStainless steel milk flask
lCentral spout connector cap
Guide to the machine
7
Page: 7
Stainless steel milk flask
For storing and keeping milk cold, with lid (with handle) and
additional cap
(not suitable for cleaning in a dishwasher)
Containers
Large and small containers for cleaning and rinsing the milk
pipework
Coffee spoon
For adding the correct amount of ground coffee
Cleaning powder
For daily cleaning of the milk pipework
Cleaning tablets
For cleaning the brew unit
Descaling tablets
For descaling the water pipework
Other accessories and spare parts
– Test strips for determining the water hardness level
– Bypass tube on the central spout
– Silicone grease for lubricating the cap on the central spout
connector
– Brush for cleaning the milk pipework
– Mains connection cable
– Central spout connector cap
Accessories supplied
8
Page: 8
Miele accessories and cleaning and conditioning products
are available for your coffee machine.
These can be ordered via the internet at
www.miele-shop.com (depending on country), from Miele or
from your Miele Chartered Agent.
Stainless steel milk flask with cap
For storing and keeping milk cold
(not suitable for cleaning in a dishwasher)
Cleaning powder
For daily cleaning of the milk pipework
Cleaning tablets
For cleaning the brew unit
Descaling tablets
For descaling the water pipework
Silicone grease
For lubricating the cap on the central spout connector
Miele|home (available in selected countries)
With Miele|home, the coffee machine becomes a
communication-enabled appliance which can be monitored
or operated via a PC or mobile phone.
Optional accessories
9
<
Page: 9
This machine conforms with all
relevant legal safety requirements.
Improper use can, however, lead to
personal injury and damage to
property.
To avoid the risk of accidents and
damage to the machine, please
read these instructions carefully
before using it for the first time.
They contain important notes on the
installation, safety, operation and
care of the machine.
Keep these instructions in a safe
place and pass them on to any
future owner.
Correct application
This machine is designed for domestic
use and for use in similar environments
by guests in hotel or motel rooms, bed
& breakfasts and other typical living
quarters.
This does not include common/shared
facilities orcommercial facilities within
hotels, motels or bed & breakfasts.
The machine is intended for domestic
use only (max. 20 cups per day) for the
preparation of espresso, cappuccino,
latte macchiato etc.
The coffee machine is not intended for
outdoor use.
Any other usage is at the owner's risk.
Miele cannot be held liable for damage
resulting from incorrect or improper use
or operation.
~ This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless they
have been given supervision or
instruction concerning its use by a
person responsible for their safety.
Safety with children
~ The coffee machine is not a toy! To
avoid the risk of injury, do not allow
children to play with it or use the
controls. They will not understand the
potential dangers posed by it. They
should be supervised whenever you
are working in the kitchen and should
be kept away from the appliance at all
times to avoid the risk of injury.
Please note that children's skin is much
more sensitive to high temperatures.
Danger of burning!
~ Install the coffee machine out of
reach of children.
~ Children should be supervised to
ensure that they do not play with the
appliance.
~ Never let children play with the
coffee machine.
~ Older children may use the
appliance only when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
They must be aware of the potential
dangers caused by incorrect operation.
Remember that coffee and espresso
are not suitable drinks for children.
Warning and Safety instructions
10
Page: 10
Technical safety
~ Before installation, check the
appliance for visible signs of damage.
Never install or attempt to use a
damaged appliance. Danger of injury!
~ Before connecting the appliance to
the mains supply, make sure that the
voltage and frequency details given on
the data plate correspond with the
on-site electricity supply, otherwise the
appliance could be damaged. Consult
a qualified electrician if in any doubt.
~ The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and tested
regularly and, where there is any doubt,
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~ The machine must only be operated
when built-in to ensure that all electrical
components are shielded. Ensure
power is not supplied to the machine
until after installation, repair work or
maintenance work has been carried
out.
~ Do not connect the machine to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the machine (e.g. danger of
overheating).
~ Appliances which are built-in behind
a furniture door must only be operated
when the door is open. Do not close the
furniture door when the appliance is in
operation.
~ This appliance must not be installed
and operated in mobile installations
(e.g. on a ship).
~ Installation work and repairs may
only be carried out by suitably qualified
and competent persons in strict
accordance with current local and
national safety regulations. Repairs and
other work by unqualified persons
could be dangerous and the
manufacturer will not be held liable.
~ While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the warranty will be
invalidated.
~ Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
Warning and Safety instructions
11
Page: 11
~ The appliance is only completely
isolated from the electricity supply
when:
– the mains fuse is disconnected,
– the screw-out fuse is removed (in
countries where this is applicable),
– it is switched off at the wall socket
and the plug is withdrawn.
Ensure that current is not supplied to
the appliance until after maintenance
or repair work has been carried out.
~ Never open the casing of the
appliance. Tampering with electrical
connections or components and
mechanical parts is highly dangerous
and can cause operational faults or
electric shock.
~ If the coffee machine is to be built in
above another appliance, there must
be a full-width, closed shelf between
them.
~ In areas which may be subject to
infestation by cockroaches or other
vermin, pay particular attention to
keeping the machine and its
surroundings in a clean condition at all
times. Any damage which may be
caused by cockroaches or other vermin
will not be covered by the machine
guarantee.
Correct use
Caution. Danger of burning. The
liquids dispensed are very hot.
Never look directly at the lighting or
use optical instruments to look at it.
~ The water pipework and milk
pipework must be rinsed through and
the machine and stainless steel milk
flask cleaned thoroughly before the first
drink is prepared.
~ Only cold, fresh tap water should be
used to fill the water container. Warm or
hot water or other liquids could damage
the machine. Change the water every
day to prevent a build-up of bacteria.
~ Do not on any account use mineral
water. Mineral water will cause serious
limescale deposits to build up in your
machine and damage it.
~ Never use water from a
reverse-osmosis system as this will
damage the appliance.
~ Never put anything other than
roasted espresso/coffee beans in the
coffee bean container. It must never be
filled with ground coffee as this could
damage the grinder.
~ The ground coffee chute must never
be filled with anything other than
ground coffee or brew unit cleaning
tablets. Otherwise the machine will be
damaged.
~ Do not use milk with additives.
Sugar additives will adhere to the milk
pipework and damage the machine.
Warning and Safety instructions
12
Page: 12
~ Do not use coffee beans which have
been treated with anything containing
caramel, any kind of sugar or any other
substances. Do not put drinks
containing sugar, or instant coffee in
the machine.
~ Never place a drink with ignited
alcohol under the central spout of the
coffee machine. The flames could ignite
plastic components and cause fire
damage.
~ Hot water and steam could cause
scalding. Be very careful when using
these functions. Make sure you do not
come into contact with steam or hot
water. The machine must not be used
for cleaning objects.
~ Do not use a steam cleaner to clean
this machine. Steam could reach the
electrical components and cause a
short circuit.
~ Clean the coffee machine daily to
avoid a build-up of bacteria. All parts,
except the brew unit, the coffee bean
container, the stainless steel milk flask
and lid, and the cover of the central
spout are dishwasher safe.
~ The machine should be descaled
regularly with the descaling tablets
supplied. The harder the water, the
more often the machine must be
descaled. The manufacturer cannot be
held liable for damage arising from
insufficient descaling.
~ Only use the descaling tablets
supplied by Miele and follow the
instructions on the packet carefully.
Use the exact proportions
recommended. Otherwise the machine
will be damaged.
~ Depending on the natural oil content
of the coffee used, the brew unit could
become blocked. It is important
therefore to clean the brew unit with a
cleaning tablet after approx. 200
coffees (A reminder will appear in the
display).
~ Used coffee grounds should be put
with the organic rubbish or on the
compost heap, but not emptied down
the sink, as they could block it.
~ Never swing from or hang anything
on the front when it is open as this
could damage the machine.
~ The machine is designed to be used
in areas with an ambient temperature of
+15 °C to +60 °C. Please do not use it
anywhere with an ambient temperature
outside this range.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and safety instructions.
Warning and Safety instructions
13
Page: 13
The following notes should help you get
to know your coffee machine before
starting to use it.
Controls
This machine has sensor controls which
react to touch. To operate the machine,
you only need to touch the relevant
sensor. There are five sensors:
s On/Off sensor: For switching the
machine on or off
< > Left/right arrows:
For scrolling through the various
programme options
OK sensor: For confirming the
selection of a programme option
and for saving a setting
- Hot water sensor
Display
Espresso
q r H I J L n m C
The following symbols come up in the
display in the main menu:
q Espresso
r Coffee
H Cappuccino
I Latte Macchiato
J Hot milk
L Milk froth
n User profile for up to 9 different
users
G Maintenance programme for milk
pipework, brew unit, descaling,
rinsing
C Settings: Customising your
machine
^ The arrow sensors are used to select
a programme option in the display.
Touch the OK sensor when the option
you want appears highlighted in the
display.
Before using for the first time
The machine must be correctly
installed and connected (see
"Electrical connection" and
"Installation") before it is used for the
first time. It must then be cleaned
(see "Cleaning and care").
Remove any protective foil from the
front of the machine.
Switching on
^ Touch the On/Off sensor s to switch
on the machine.
When the machine is switched on for
the first few times with the master
switch, a welcome screen and some
other messages will appear briefly. The
welcome screen will be displayed each
time the machine is switched on until 5
drinks have been prepared.
Míele
Willkommen
Using the coffee machine - first steps
14
Page: 14
When you use the machine for the very
first time, you will be prompted to
select a language.
^ Use the right or left arrow until the
language you want appears in the
display.
^ Touch the OK sensor.
The language you have chosen is
now set.
The request to set the clock format will
then appear.
^ Use the arrows to select the clock
format you want (12 h or 24 h), and
then touch the OK sensor.
^ Enter the time of day: First set the
hour with the arrow sensors and then
touch the OK sensor. Then set the
minutes in the same way.
^ Now decide when you want the time
of day to be displayed, and press the
OK sensor.
– "On": The display will always show
the time of day (even when the
machine is switched off).
– "On for 60 seconds": The display
will show the time for 60 seconds,
and then go dark after the machine
is switched off.
– "Do not display": The display will
only show the time of day when the
machine is switched on, and will go
dark as soon as it is switched off.
^ Press the OK sensor to confirm that
your machine is communication
enabled.
If everything has been entered
correctly, Set up successful will
appear in the display.
^ Confirm this message by touching
the OK sensor.
To get the best out of your
coffee machine and to set it
up for your specific
requirements, please continue to work
through these operating instructions.
Switching off
^ Touch the On/Off sensor s to switch
off the machine.
If automatic rinsing is switched on,
providing that coffee or a milk drink
has actually been dispensed from
machine, the rinsing process will
begin. After this the machine will
switch off automatically.
Using the coffee machine - first steps
15
Page: 15
The coffee machine must be
cleaned thoroughly (see "Cleaning
and care") before you fill it with water
and coffee beans.
It is vital that you programme in
the water hardness level of your
water (see "Settings: Customising
your machine - Setting the water
hardness").
Filling the water container
The quality of the water plays
an important part in the
overall quality of the coffee.
The water container should therefore be
emptied and filled with fresh tap water
every day.
Hot water and other liquids could
damage the machine. Only use
cold, clean tap water and fill the
machine every day. Do not on any
account use mineral water. Mineral
water will cause serious limescale
deposits to build up in your machine
and damage it.
^ Open the machine door.
^ Pull the water container forwards to
remove it.
^ Remove the lid, and fill the water
container with cold, clean tap water
up to the "Max." mark.
A valve at the front of the water
container will ensure that water
cannot escape.
^ Put the lid back on and replace the
container in the machine, pushing it
right to the back until it clicks into
position.
The water container must click into
position and sit in the machine
correctly to ensure the valve is
sealed. If you do not hear it click into
position or the water container
protrudes slightly or does not sit flat
on the floor, check whether the
surface that the water container sits
on is dirty and clean it if necessary.
Filling the water and coffee bean containers
16
Page: 16
Filling the coffee bean
container
Only put roasted espresso or coffee
beans in the container. Anything
else, including ground coffee, will
damage the grinder.
Do not use coffee beans which have
been treated with caramel, sugar or
other substances. Do not put drinks
containing sugar, or instant coffee in
the machine. Sugar will damage the
machine.
^ Pull out the coffee bean container.
^ Push back the lid and fill the
container with roasted coffee beans.
^ Slide the lid back into place,
^ push the coffee bean container back
into the machine and close the
machine door.
Filling the water and coffee bean containers
17
Page: 17
Important: the water piping must be
rinsed through every day and the
machine cleaned thoroughly before
the first drink of the day is prepared.
This will take place automatically if
the Rinsing programme option has
been set to "On" and the machine is
cold. Hot water will run out of the
central spout into the drip tray once
the machine has heated up.
If the Rinsing programme option has
been set to "Off", select "Rinsing" in
the display to rinse out the system
(see "Cleaning and care").
Switching on
^ Touch the On/Off sensor s.
The following message will then
appear:
Heating phase
If the automatic Rinsing programme
option has been set to "On" (factory
default setting), the following will
appear after the machine has heated
up:
Rinsing
Water will run out of the central spout.
The main menu will then appear in the
display:
Espresso
q r H I J L n m C
Pre-warming cups
The cups should always be
pre-warmed to allow the flavour to
develop and be retained. The aroma of
espresso does not react well to cold.
The smaller the volume of
coffee/espresso and the thicker the
cup, the more important it is to
pre-warm the cup.
^ Place the cup to be warmed under
the hot water spout.
^ Touch the Hot water sensor.
^ Run a little hot water into the cup to
warm it.
^ Touch the OK sensor to stop the flow
of water.
^ Leave the cup for about a minute
until it is warm, then pour the water
out.
Please note, hot water function is
designed for pre-heating cups only and
not for preparing hot drinks, such as
tea.
Making drinks
18
Page: 18
Adjusting the height of the
central spout
The height of the central spout can be
adjusted to suit the height of the cup so
that the drink will not cool down as
quickly as it would if the spout were
further away from the cup. The crema
will also be a better quality if the coffee
does not have so far to go!
^ Slowly pull the central spout
downwards.
Preparing espresso and coffee
from freshly ground beans
You can programme the size
of portion dispensed for
espresso and coffee
according to taste (see "Programming
the amount: setting the portion sizes").
Espresso, coffee, double espresso and
double coffee are all dispensed in the
same way:
^ Place a cup under the central spout.
The coffee is always dispensed
simultaneously from both spouts.
Espresso
q r H I J L n m C
^ Select the drink you want using the
arrow sensors and touch the OK
sensor once.
The machine will now grind the coffee
beans, pre-brew the ground coffee (if
the "Pre-brewing" option has been set
to "On") and the coffee will then be
dispensed from the coffee spouts.
Do not open the machine door
during the brewing process. This will
damage the machine.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first two
cups of coffee.
Making drinks
19
Page: 19
Double portion
If you want to dispense a double
portion of coffee or espresso or to
dispense two portions at the same time:
^ Touch the OK sensor twice whilst
"2 portions?" is in the display.
The two portions will be dispensed one
after the other.
^ To prepare two cups at the same
time, place one cup under each jet.
Cancelling preparation
^ Touch the OK sensor when "Stop" is
showing in the display.
Preparation will be halted.
Making espresso and coffee
using ready ground coffee
Adding ground coffee
If you want to make espresso or coffee
using ready ground coffee, you can
add ground coffee to the specially
designed coffee chute.
^ Pull the cover for the coffee chute
right out of the machine and open up
the lid (a) to the chute.
^ Use the scoop supplied and place
one level scoop of ground coffee into
the coffee chute (b). Close the lid.
Push the cover into the machine and
close the machine door.
Make the coffee?
Yes
No
^ Use the arrow sensor to highlight
"Yes".
The display will change to the main
menu and you can select the drink you
want.
Making drinks
20
Page: 20
If you have not added any
ground coffee, you must
select "No". Otherwise the
machine will assume that there is
ground coffee in the chute, and only
water will be dispensed the next time
coffee is made!
To make a drink
^ Place a cup under the central spout.
^ Touch the OK sensor.
The machine will prepare espresso or
coffee, which will then be dispensed
from the central spouts.
Do not open the machine door
during the brewing process. This will
damage the machine.
At the end of the process, the coffee
machine will revert automatically to
making coffee with coffee beans.
To cancel preparation
^ Touch the OK sensor.
Preparation will be halted.
Only one portion can be prepared at
a time when using ready ground
coffee. This is because the machine
will use all the ground coffee which
has been added to the chute to
prepare one coffee.
Drinks with milk
Stainless steel milk flask
The stainless steel milk flask is vacuum
insulated to keep the milk cold for a
period of time. With an ambient
temperature of about 20°C, milk at 6°C
can be stored for 11-12 hours and
remain under 13°C. (Milk that is warmer
than 13°C should not be used because
it will not make good milk froth.) Milk
cannot be stored for as long as 11-12
hours if there is a warming drawer
underneath the coffee machine.
Do not fill the stainless steel milk
flask to the rim. You need to leave a
gap of at least 2 -3 cm below the
rim.
It is important to keep the top of the
flask and the seals clean (whilst
filling it and carrying it). Any soiling
can lead to a malfunction of the flask
in the machine.
It is important to pre-heat
the cup with hot water
before making your drink.
21
Making drinks
Page: 21
To make drinks with milk,
^ place the lid on the stainless steel
milk flask by twisting it anticlockwise
until it locks into place.
^ Open the machine door and hang the
milk flask in the machine as
illustrated, ensuring that the milk
pipework is correctly engaged.
^ Then close the machine door.
Cappuccino, latte macchiato, hot
milk, milk froth
^ Place a suitable cup or glass under
both jets.
For best results with latte
macchiato, the glass should
be placed beneath the jets
such that the espresso flows into the
centre of the milk froth.
Cappuccino
q r H I J L n m C
^ Touch the right arrow sensor until
symbol for the drink you want is
highlighted and then touch the OK
sensor once.
^ Touch the OK sensor again to stop
dispensing.
You can then specify the proportions
of coffee, milk froth and hot milk
required for the drink (see
"Programming the amount: setting
the portion sizes").
Making drinks
22
Page: 22
User profile drinks
The User profile function is used to
select the quantity of water and milk for
your drink, as well as the fineness of the
ground, temperature and pre-brewing
to suit your taste and that of your
guests (see "Setting up user profiles").
If you have set the machine up for a
specific user profile you must first
select the user profile required and
then the type of drink.
User profile
q r H I J L n m C
^ Touch the right arrow to highlight the
User profile symbol and then touch
the OK sensor.
^ Select "Select" with the arrow sensors
and touch the OK sensor.
^ Select the user profile you want with
one of the arrow sensors and touch
the OK sensor.
A large user profile symbol n
will now appear in the
display to show that a user
profile has been selected.
This function operates in the same
way as a standard profile.
After use
Before switching the machine off for
any length of time, the pipework, brew
system, spouts and milk pipework need
to be cleaned (see "Cleaning and care:
"Rinse the system" and "Clean the milk
pipework").
Making drinks
23
Page: 23
A good espresso or coffee with a thick,
even crema depends not only on the
quality, pressure and temperature of
the water and the quality of the coffee
beans, but also on the quantity of
beans and how finely they are ground.
The crema should have an even
nut-brown colour with dark stripes
running through it.
You can set the amount of coffee beans
to be ground in the main menu (see
"Settings: Customising your machine -
Setting the amount of coffee").
Always adjust the amount of beans
to be ground one stage at a time
only and then let the machine grind
this quantity before adjusting the
amount again. Otherwise the
machine will be damaged.
There are various ways to tell whether
the coffee grinder is set correctly:
Espresso or coffee flows into the cup
too quickly
The beans have been ground too
coarsely and the pressure is not
sufficient. Set the grinder on a finer
setting.
Espresso or coffee only trickles into
the cup
The beans have been ground too finely
and the coffee will be bitter. Set the
grinder on a coarser setting.
The crema is evenly coloured but
pale
The beans have been ground too
coarsely. Set the grinder on a finer
setting.
The crema is very dark brown on one
side, graduating almost to white on
the other
The beans have been ground too finely.
Set the grinder on a coarser setting.
To alter the grinder setting
^ Push the slide control one setting to
the left (for finer grinding) or one
setting to the right (for coarser
grinding).
You should be able to feel the notches
when moving the slide control.
^ If the slide control refuses to move,
close the machine and dispense a
cup of espresso coffee.
Then try the slide control again.
Setting the coffee grinder
24
Page: 24
It is easy to customise your machine to
suit your exact requirements.
Settings menu
To select the various programme
options:
Settings F
q r H I J L n m C
^ Touch the right arrow sensor until
"Settings" appears in the display, and
then touch the OK sensor.
^ Touch one of the arrow sensors until
the option you want is highlighted.
^ Then touch the OK sensor to select
the highlighted option.
The option that is currently active on the
machine will have a tick next to it.
Possible setting options
Language F: 22 different languages
are available to choose from
Time of day: You can set either a
24-hour or 12-hour clock, and choose
to have the Time of day display on or
off
Timer: Here, you can set or activate the
timer. The following options are
available in the "Set" menu:
– Switch on at: The machine can be
set to switch on at a specific time of
day.
– Switch off after: The machine can
be set to switch off after a pre-set
time. A time of between 15 minutes
to 9 hours can be set.
– Switch off at: The machine can be
set to switch off at a specific time of
day.
Coffee jug: 3 to 8 cups
Programming the amount: Espresso,
coffee, cappuccino, latte macchiato,
hot milk, milk froth and hot water (see
"Programming the amount: setting the
portion sizes").
Amount of coffee: You can set
different amounts of coffee for
espresso, coffee, cappuccino and latte
macchiato.
Pre-brewing: Long, Normal, Without
Temperature: The temperature for
espresso, coffee, cappuccino, latte
macchiato and hot water can be set
from minimum to maximum.
Automatic rinsing: On, Off
Steam system: On, Off
Lighting: Brightness
Info: No. of drinks, Portions until
descaling
Safety: System lock (On, Off)
Settings: customising your machine
25
Page: 25
Water hardness: Soft, Medium, Hard,
Very hard
Display: Contrast, Brightness
Volume: Buzzer tones, Keypad tone
Showroom prog.: Demo programme,
Off
Factory default: All settings can be
reset to the factory default and user
profiles deleted
To return to the previous option in
the menu, select "Back" A".
Further details about the different
options can be found in the pages
that follow.
Selecting a language
If you want to change the language
used in the display, use the Settings
menu and follow the flag symbol.
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Language F
Time of day
^ Touch the OK sensor.
^ Touch one of the arrow sensors until
the language you want is highlighted.
^ Touch the OK sensor.
The setting is saved automatically and
the display will go back to the previous
screen.
All display texts will now appear in the
language you have just selected.
If you select the wrong language by
mistake, find the "Language" option
via the flag symbol F again.
Settings: customising your machine
26
Page: 26
Setting the time of day
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Time of day
Timer
^ Touch the right arrow sensor until
"Time of day" is highlighted and touch
the OK sensor.
There are three options:
Display
The Time of day display can be
switched on or off.
^ Use the arrow sensors to select
"Display".
You can now choose one of three
options:
– "On": The display will always show
the time of day (even when the
machine is switched off).
– "On for 60 seconds": If the machine
is switched off, the display will show
the time for 60 seconds, and then go
dark.
– "Do not display": The display will
only show the time of day when the
machine is switched on, and will go
dark as soon as it is switched off.
^ Once you have selected the display
format you require, touch OK.
Clock format
^ Use the arrow sensors to select
"Clock format".
^ Use the right arrow to select a 24 h or
12 h clock.
^ Touch the OK sensor when the option
you want is highlighted.
The clock format you have chosen will
be saved.
Setting the time of day
^ Use the arrow sensors to select "Set".
^ First set the hour with one of the
arrow sensors. Touch the OK sensor.
^ Then use the arrow sensors to set the
minutes. Touch the OK sensor.
The time of day is now saved.
You can set the time of day
and also change the display
options when the coffee
machine is switched off.
To do this:
^ Touch the OK sensor whilst the
machine is off.
^ Select "Time of day", and then touch
the OK sensor.
You can now select "Display" or "Set"
and make changes if you wish.
Touch the OK sensor to save the
setting.
Settings: customising your machine
27
Page: 27
Setting the timer
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Timer
Coffee jug
^ Touch the right arrow sensor until
"Timer" is highlighted and touch the
OK sensor.
^ Select "Set" with the arrow sensors
and touch the OK sensor.
There are three options:
Switch on at:
You can choose a time for the coffee
machine to switch on automatically,
e.g. in the morning for breakfast.
^ Select "Switch on at" with the arrow
sensors and touch the OK sensor.
^ First set the hour with one of the
arrow sensors. Touch the OK sensor.
^ Then use the arrow sensors to set the
minutes. Touch the OK sensor.
If you activate the timer, the coffee
machine will switch on every day at the
time you have set (see "Activate")
If Automatic rinsing is set to "On", the
machine will automatically carry out
a brief rinse when it switches itself
on.
If the System lock is activated, the
machine will not switch itself on at
the pre-set time.
If the machine has switched itself on
automatically 3 times and no drinks
or hot water have been dispensed,
the machine will not switch itself on
again automatically. The
programmed times will, however,
remain in memory and will be
reactivated after manually switching
the machine on again. This prevents
the machine switching itself on
unnecessarily, for example whilst
you are away on holiday, and you
have not cancelled the automatic
switching on procedure.
Switch off after:
To save energy, the machine can be
set to switch off automatically by
selecting the "Switch off after" option. A
time of between 15 minutes to 9 hours
can be set. This time is measured from
the last time a drink was dispensed.
^ Select "Switch off after" with the arrow
sensors and touch the OK sensor.
For example, 1:00 means that the
machine will switch off after 1 hour.
Settings: customising your machine
28
Page: 28
^ First set the hour with one of the
arrow sensors. Touch the OK sensor.
^ Then use the arrow sensors to set the
minutes. Touch the OK sensor.
The machine will now switch off after
the time you have set.
If Automatic rinsing is set to "On"
and the machine has been used for
making drinks, it will automatically
carry out a brief rinse before it
switches itself off.
Switch off at:
If you always use your machine at a
particular time of the day you can set it
to switch off automatically at a specific
time.
^ Select "Switch off at" with the arrow
sensors and touch the OK sensor.
^ First set the hour with one of the
arrow sensors. Touch the OK sensor.
^ Then use the arrow sensors to set the
minutes. Touch the OK sensor.
If you activate the timer, the coffee
machine will switch off every day at the
time you have set (see "Activate").
If Automatic rinsing is set to "On"
and the machine has been used for
making drinks, it will automatically
carry out a brief rinse before it
switches itself off.
Activate
^ Select "Activate" with the arrow
sensors and touch the OK sensor.
The "Switch on at" and "Switch off at"
options will show in the display.
Activate
8 Switch on at
8 Switch off at
^ Select the option required with one of
the arrow sensors.
Touching the OK sensor activates the
option (ticked box) or deactivates (no
tick).
^ Use one of the arrow sensors to
select "Accept" and then touch the
OK sensor.
^ Now use one of the arrow sensors to
select "Back A" and touch the OK
sensor.
Settings: customising your machine
29
Page: 29
Coffee jug (making several
cups one after the other)
This function can be used to make up
to 8 cups of coffee automatically one
after the other (max. 1 l).
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Coffee jug
Prog. the amount
^ Touch the right arrow sensor until
"Coffee jug" is highlighted, and touch
the OK sensor.
^ Select the number of cups you wish
to make (3 to 8), and confirm with
OK.
^ Place a coffee jug of a suitable size
under the central spout, and follow
the directions in the display.
The coffee for each cup is individually
ground, brewed and poured. Each
stage of the process is shown in the
display. You can cancel the process at
any stage by touching the OK sensor
("Stop").
^ When Programme finished shows in
the display, confirm with OK.
Setting the amount of coffee
Both the flavour and the crema on the
coffee depend on the quantity of
ground coffee used.
6 to 14 grams of coffee beans are used
per cup, depending on the type of
coffee. The greater the quantity, the
stronger the espresso, coffee,
cappuccino, latte macchiato or
cappuccino.
The quality of the crema is also affected
by the quantity:
– If the crema is evenly coloured but
pale, it could mean that too little
coffee is being used.
– If the crema is very dark brown on
one side, graduating almost to white
on the other, it could mean that too
much coffee is being used.
You can set different
amounts of coffee beans to
be ground for espresso,
coffee, cappuccino and latte
macchiato.
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Amount of coffee
Pre-brewing
^ Touch the right arrow sensor until
"Amount of coffee" is highlighted and
touch the OK sensor.
Settings: customising your machine
30
Page: 30
^ Use the arrow sensor to select the
drink that you wish to set the amount
of coffee for and then touch the OK
sensor.
^ Use the arrow sensor to set the
amount to "more" or "less".
^ Touch the OK sensor to save the
setting.
Setting Pre-brewing
When the Pre-brewing function is
switched on, the freshly ground coffee
is first moistened with a little hot water.
Then the remaining water is forced
through the moistened coffee at high
pressure. This will make the aroma of
the coffee considerably more intensive.
Without pre-brewing, hot water is
forced straight away at high pressure
through the ground coffee.
You can select a normal or extra long
Pre-brewing, or deselect Pre-brewing
altogether. The machine is delivered
with Pre-brewing set at Off (=
Without).
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Pre-brewing
Temperature
^ Touch the right arrow sensor until
"Pre-brewing" is highlighted and
touch the OK sensor.
^ Use the arrow sensors to highlight
the Pre-brewing option.
^ Touch the OK sensor to save the
setting.
Setting the temperature
Different temperature ranges can be
selected to take account of making
coffee at different altitudes. If the
machine is located above 2000 meters
above sea level the temperatures need
to be set lower due to the change in
pressure.
There is a choice of five temperature
ranges for each type of coffee, and
three for hot water.
Not all types of coffee can
withstand a high temperature.
Certain types are too delicate
and the crema on top would not be so
good.
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Temperature
Automatic rinsing
^ Touch the right arrow sensor until
"Temperature" is highlighted, and
then touch the OK sensor.
^ Use the arrow sensors to highlight
the drink for which you wish to set the
temperature, and then touch the OK
sensor.
^ Use the arrow sensors to highlight
the temperature option.
^ Touch the OK sensor to save the
setting.
Settings: customising your machine
31
Page: 31
Setting Automatic rinsing
To remove any coffee grounds and
residual milk from the system, the water
piping must be rinsed through before
the first drink of the day is prepared. If
Automatic rinsing is selected, the rinse
cycle will take place automatically
whilst the machine is still cold when the
machine is switched on. This will also
pre-heat the system because hot water
is used for the rinse process. A
message will appear in the display to
let you know what is happening. The
machine will also run an automatic rinse
before it switches off, if it has been
used to prepare a drink.
The machine is delivered with the
Automatic rinsing option set to "On".
To prevent water from
running into the drip tray,
always place an empty cup
or the small cleaning container under
the central spout before making the first
drink.
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Automatic rinsing
Steam system
^ Touch the right arrow sensor until
"Automatic rinsing" is highlighted and
touch the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off" and touch the OK
sensor.
It is a good idea to set this
option to "On" so that the
rinse process cannot be
forgotten.
Setting the Steam system
The machine has two heating systems.
The Steam system enables milk froth or
hot milk, and coffee or espresso to be
made at the same time. To save
energy, the Steam system can be
switched off if steam is not required all
the time.
If this option is switched off, milk
froth and hot milk can still be made;
however the machine must be
heated up first.
The Steam heating system remains
active as long as the machine is still
on.
^ Select "Settings F" from the main
menu and touch the OK sensor.
Settings
Steam system
Lighting
^ Touch the right arrow sensor until
"Steam system" is highlighted, and
then touch the OK sensor.
^ Touch one of the arrow sensors to
select "On" or "Off", and then touch
the OK sensor.
Settings: customising your machine
32
Page: 32
Lighting: Setting the
brightness
You can set how bright the lighting
should be on the machine:
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Lighting
Info
^ Touch the right arrow sensor until
"Lighting" is highlighted, and then
touch the OK sensor.
^ Select "Brightness", and then touch
the OK sensor.
^ Touch one of the arrow sensors to
select a lighter or darker setting, and
then touch the OK sensor.
To switch off the lighting,
^ touch the left arrow sensor until the
small white bars are no longer visible.
Lighting: Setting the switch-off
time
The machine lights up when switched
on. It switches off automatically after
15 minutes of inactivity to save energy.
The lighting can be set to remain on
after the machine is switched off, and
then to go out automatically after a
specified time if the machine is not
used.
This duration can be set to between
15 minutes and 6 hours:
^ Switch the machine off.
^ Touch the OK sensor whilst the
machine is off.
^ Select "Lighting" and touch the OK
sensor.
^ Select "Switch off after" and touch the
OK sensor.
^ Select the switch-off time you want
with the arrow sensors and touch the
OK sensor.
^ Select "Brightness", and touch the OK
sensor.
^ Touch one of the arrow sensors to
select a lighter or darker setting, and
then touch the OK sensor to save the
setting (factory default setting: Off).
^ Touch "Back A" twice to leave the
menu.
The lighting will switch off automatically
after the duration set.
If you do not want the lighting to remain
on after switching off the coffee
machine (Factory default):
^ Touch the OK sensor whilst the
machine is off.
^ Select "Lighting", and then touch the
OK sensor.
^ Select "Brightness" and touch the OK
sensor.
^ Touch the left arrow sensor until the
small white bars are no longer visible.
^ Touch "Back A" twice to leave the
menu.
Settings: customising your machine
33
Page: 33
Info (showing the number of
drinks)
The "Info" option enables you to check
how many drinks the machine has
already dispensed or how many you
can still dispense before it has to be
descaled.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Info
Safety
^ Touch the right arrow sensor until
"Info" is highlighted and touch the OK
sensor.
^ Select "No of drinks" or "Portions until
descale" with the arrow sensors and
touch the OK sensor.
With "No of drinks" you can check the
"Total number of coffees" or the number
of portions dispensed to date of a
particular type of coffee, milk froth, hot
milk or hot water.
^ Touch the OK sensor to return to the
previous display.
Safety (Activating the System
lock)
The machine can be locked to ensure
that it is not operated by unsupervised
children or persons who are
unacquainted with the operating
instructions.
When the machine is locked, the
"Switch on at" setting of the timer will
not work.
To activate or deactivate the System
lock
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Safety
Water hardness
^ Select "Safety" with the arrow sensors
and touch the OK sensor.
^ Use an arrow sensor to highlight
"System lock" and then touch the OK
sensor.
^ Select "On" with the arrow sensors
and touch the OK sensor.
The machine will now lock as soon as it
is switched off and cannot be switched
on again. If a sensor is touched, a
message and a locked padlock X will
appear in the display.
To deactivate the System lock,
proceed as above, but select "Off".
Settings: customising your machine
34
Page: 34
To override the System lock
^ Touch the OK sensor for about
3 seconds.
The machine is now temporarily
unlocked and can be used to make
drinks again. It locks itself as soon as
the machine is switched off.
Setting the water hardness
For trouble-free operation of the coffee
machine, and to ensure that the
descaling reminder appears in the
display at the appropriate time, it is
important to set the water hardness
level. The water hardness level
indicates how much calcium is
dissolved in the water. The higher the
calcium content, the harder the water,
and the harder the water, the more
often the machine will need to be
descaled.
The machine measures the amount of
water which has been taken in
(including the amount required for
producing steam). The amount of water
which the machine can use before it
needs to be descaled will depend on
the water hardness level set. Less
water will be used in hard water areas
than in soft water areas.
Your local water authority will be able to
tell you the hardness of water in your
area. Alternatively, you can measure
the hardness yourself using the
enclosed test strip:
^ Dip the strip in your drinking water for
approximately a second, then shake
off any excess water. The result will
be evident after about a minute.
If the water is harder than 40
°d/7.0 mmol/l, limescale will build up
more rapidy than with soft water.
Descaling will need to be carried out
more regularly than stated to
prevent limescale damage to the
machine.
The machine has four programmable
levels:
– Soft:
Local water hardness level 1
0-3 °d (0-0.6 mmol/l)
Water through-flow: approx. 100 l
Steam through-flow: approx. 120 min.
– Medium:
Local water hardness level 1
4-7 °d (0.7-1.3 mmol/l)
Water through-flow: approx. 80 l
Steam through-flow: approx. 90 min.
– Hard:
Local water hardness level 2
7-14 °d (1.3-2.5 mmol/l)
Water through-flow: approx. 60 l
Steam through-flow: approx. 60 min.
Settings: customising your machine
35
Page: 35
– Very hard:
Local water hardness levels 3-4
14-21 °d (2.5-3.8 mmol/l) or more
Water through-flow: approx. 40 l
Steam through-flow: approx. 30 min.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Water hardness
Display
^ Use the arrow sensors to highlight
"Water hardness" and then touch the
OK sensor.
^ Touch one of the arrow sensors to set
the water hardness, and then touch
the OK sensor.
The water hardness level selected is
saved to memory.
Setting the display
You can adjust both the contrast and
the brightness of the display:
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Display
Volume
^ Touch the right arrow sensor until
"Display" is highlighted and touch the
OK sensor.
^ Touch one of the arrow sensors to
select "Contrast" or "Brightness" and
touch the OK sensor.
^ Touch one of the arrow sensors to set
the contrast lower or higher or the
brightness lighter or darker.
^ Touch the OK sensor to save the
setting.
Setting the volume (keypad
tone, buzzer)
You can choose for a keypad tone to
sound each time a sensor is touched.
The volume of the tone can also be
adjusted:
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Volume
Showroom prog.
^ Touch the right arrow sensor until
"Volume" is highlighted, and then
touch the OK sensor.
^ Touch one of the arrow sensors to
select "Buzzer tones" or "Keypad
tone" and touch the OK sensor.
^ Touch one of the arrow sensors to set
the volume quieter or louder.
If you continue towards the left until
none of the small white bars is showing,
the tone will be switched off.
^ Touch the OK sensor to save the
setting.
Settings: customising your machine
36
Page: 36
Showroom programme
This function enables the machine to be
illuminated in a showroom situtation
without the heaters working.
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
From here you can select whether to
reset all settings back to the default or
to delete any user profiles.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Factory default
Back #
^ Use an arrow sensor to highlight
"Factory default", and then touch the
OK sensor.
Various options will then be available:
All settings
This option sets "All settings" back to
the factory default.
^ Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Factory default settings (the coffee
machine is delivered with the
following settings)
– Amount of coffee (medium)
– Temperatures for coffee and hot
water (medium settings for both)
– Pre-brewing (without)
– Automatic rinsing and Steam system
(both set to "On")
– Showroom prog. (Off)
– Time of day display (On for
60 seconds),
Clock format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00), (Switch
on at and Switch off at are both
deactivated)
– Coffee jug (3 cups)
– Lighting: Brightness (medium)
– Safety: System lock (Off)
– Water hardness (Very hard 4)
Settings: customising your machine
37
Page: 37
– Display: Contrast (medium),
Brightness (maximum)
– Volume: Volume of buzzer tones and
keypad tone (maximum setting for
both)
– User profile: Revert (when switched
on).
User profiles
You can delete all user profiles except
for the standard one under "User
Profiles".
^ Select "Reset" under "User profiles",
and touch the OK sensor.
User profiles are then deleted.
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
factory defaults will not be carried out.
Miele|home
(available in selected countries)
With Miele|home, the coffee machine
becomes communication-enabled and
can be monitored or operated via a pc
or mobile phone.
Settings: customising your machine
38
Page: 38
The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used. Not all espresso
and coffee cups are the same size. To
ensure the machine uses the right
amount of water to suit your taste and
your cups, you can programme the
amount to use.
With milky drinks the proportions of
espresso, milk and milk froth are
important for the taste. These
proportions can be set for cappuccino
and latte macchiato.
You can programme the amount in two
ways, either by touching the OK sensor
continually, or via the "Settings" option.
If a User profile has been activated,
the proportions for this particular
User profile will be set.
If you wish to set the proportions for
all of the User profiles, select the
"Standard" user profile.
Programming the amount of
espresso, coffee, hot milk and
milk froth via the OK sensor
^ Place the appropriate cup for the
amount you want to programme
under the spouts.
^ Select the type of drink you require.
^ Touch the OK sensor until "Prog. the
amount" appears in the display.
^ When sufficient liquid has flowed into
the cup touch the OK sensor again.
"Save" will then appear in the display.
The volumes of water or milk
programmed in will now be dispensed
every time that particular drink is
selected.
Water flow stops automatically when
the maximum amount possible is
reached. The maximum amount
possible for that type of drink will be
saved.
If there is insufficient water or milk in
the water container or milk flask, the
process will be stopped and the
amount will not be saved.
Programming the amount: setting the portion sizes
39
Page: 39
Programming the proportions
for cappuccino or latte
macchiato via the OK sensor
^ Place the appropriate cup or glass
for the amount you want to
programme under the spouts.
^ Select Cappuccino or Latte
Macchiato.
^ Touch the OK sensor until the display
shows the options for Cappuccino
(Milk froth, Espresso) or Latte
Macchiato (Hot milk, Milk froth,
Espresso).
Latte Macchiato
8 Hot milk
8 Milk froth
^ Use the arrow sensor to select the
component you wish to set the
amount for.
^ Touch the OK sensor to activate a
tick next the component you have
selected so that you can then
programme its amount.
^ Repeat this for all components
required for that drink.
^ Select "Start" with the arrow sensors
and touch the OK sensor.
The machine will now start the process
for making a cappuccino or latte
macchiato.
As soon as the component required
starts to flow into the cup or glass,
"Programme the amount" will appear in
the display.
^ Once sufficient amounts have flowed
into the cup or glass and "Save"
shows in the display, press the OK
sensor to save the amount.
Each subsequent drink of this type will
then have the same proportions of
coffee, milk etc.
Programming the amount: setting the portion sizes
40
Page: 40
Programming the amount for
hot water via the Hot water
sensor
^ Place the appropriate cup for the
amount you want to programme
under the hot water spout.
^ Touch the Hot water sensor until
"Prog. the amount" appears in the
display.
^ When sufficient water has flowed into
the cup touch the Hot water sensor
again. "Save" will then appear in the
display.
Each subsequent portion of hot water
will then have the same amount.
Programming the amount via
"Settings"
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Prog. the amount
Amount of coffee
^ Use the arrow sensors to highlight
"Prog. the amount", and then touch
the OK sensor.
^ Use the arrow sensor to select the
drink you wish to set the amount for.
^ Select "Start" and touch the OK
sensor.
The procedure is now the same as for
programming the amount using the OK
sensor or the Hot water sensor.
Programming the amount: setting the portion sizes
41
Page: 41
To cater for different tastes and
preferences, you can enter up to 9
individual User profiles. For each User
profile, you can select the following
individual settings:
– The amount of water for
coffee-based drinks and hot water
– The amount of milk for drinks with
milk
– The amount of coffee
– The water temperature
– Pre-brewing
(See "Programming the amount: setting
the proportions" and "Settings:
customising your machine").
User profile
q r H I J L n m C
^ Touch the right arrow sensor until
"User profile" is highlighted, and then
touch the OK sensor.
You can now:
– Select User profile from the User
profiles which are already allocated.
– Create User profile, if you want to
enter a new User profile.
The following options only appear if you
have already entered a new User
profile in addition to the Standard User
profile:
– Change User profile, if you want to
alter a User profile.
– Delete User profile, if you want to
delete a User profile.
– Revert: You can programme the
machine so that it always reverts to
the Standard User profile or so that it
continues to operate using a User
profile you have set.
Selecting a User profile
^ Select the User profile you want with
the arrow sensors and touch the OK
sensor.
Espresso
+ George
q r H I J L n m C
To show that a user has
been selected, the top line of
the display will now show a
large symbol for a "user"!
Setting up User profiles
42
Page: 42
Creating a User profile
^ Use the arrow sensors to highlight
"Create", and then touch the OK
sensor.
You can allocate up to 9 User
profiles. If you try to allocate more
than 9 User profiles, "Memory full"
will appear in the display and you
will need to delete one name to
create space.
Letters and numbers will now appear in
the display. Use the arrow sensors to
select the letters and numbers you
require.
A new word always starts with a capital
letter. The rest of the word will
automatically be in lower case.
Hyphens and spaces can be used
between lower case letters.
^ Use the arrow sensors to select the
characters you require.
^ Confirm each one with the OK
sensor.
The characters you have chosen will
appear in the top line of the display.
If you make a mistake, use
the arrow sensors to select
the bin symbol and touch the
OK sensor. The last character will be
deleted.
Saving an entry
^ When you have finished making your
entry, use the arrow sensors to
highlight the word "OK" and then
touch the OK sensor.
The User profile welcome screen will
appear briefly in the display, and then
the Main menu.
Not saving an entry
^ If you don't wish to save your entry,
use the arrow sensors to highlight the
word "Back A" and then touch the
OK sensor.
Changing a User profile
Once you have selected the "Change"
option and confirmed your selection
with OK,
^ select the User profile, and touch the
OK sensor.
Now proceed as described in "Creating
a User profile".
– To delete a letter, select the bin
symbol.
– To enter new characters, select the
relevant character and confirm with
OK.
– Save the new name by selecting
"OK" in the display and touching the
OK sensor.
Setting up User profiles
43
Page: 43
Deleting a User profile
If you want to delete the User profile
completely,
^ Select "Delete User profile" using the
OK sensor.
^ Use the arrow sensors to select the
user profile you want to delete.
^ Touch the OK sensor.
A tick will appear after the user profile
and after a short while it will be deleted.
Revert
You can programme the machine so
that it reverts to the Standard User
profile after you have made each drink,
or so that it continues to operate using
a User profile you have set.
To set the profile to be used:
^ Select "Revert" with one of the arrow
sensors.
You can now select one of the
following:
Manually
The coffee machine will store the user
profile you have selected until you
select another one.
^ Select "Manually" with the arrow
sensors and touch the OK sensor.
After each use
The machine will automatically revert to
the Standard User profile each time a
drink is dispensed.
^ Select "After each use" with the arrow
sensors and touch the OK sensor.
When switched on
Each time the machine is switched on it
will automatically select the Standard
User profile regardless of which User
profile was set before the machine was
last switched off.
^ Select "When switched on" with the
arrow sensors and touch the OK
sensor.
Setting up User profiles
44
Page: 44
Overview
Clean the coffee machine regularly to avoid a build-up of bacteria.
Time interval What do I have to do?
Each time milk is used to make a
drink, if more than one hour has
passed since the last drink was
made
Rinse milk pipework
Daily
(usually at the end of the day
before switching off the appliance)
Rinse the system (pipework)
Clean milk pipework (with cleaning powder)
Clean the stainless steel milk flask
Clean the central spout
Clean the water container
Clean the waste container
Clean the drip tray and the drip tray cover
Once a week
(more often if heavily soiled )
Clean the central spout connector
Clean the inside of the machine
Clean the drip tray inside the machine door
Clean the brew unit
Clean the front of the machine (especially straight after
descaling)
Once a month Lubricate the cap on the central spout connector
Approx. after 200 portions Degrease the brew unit (with cleaning tablets)
Depending on the water hardness
level in your area
Descale the machine
As required Clean milk pipework of any blockages
Clean the coffee bean container
Cleaning and care
45
Page: 45
Always allow the machine to cool
down before cleaning. Please be
aware that the water in the drip tray
will be hot.
Danger of scalding.
Do not clean the machine with a
steam cleaner as this will damage
the machine.
Do not use cleaners containing
chlorides, acids, soda or scouring
agents. These would damage the
surface.
It is important to clean the machine
regularly, as the used coffee grounds
will soon go mouldy.
All removable parts can be cleaned in
the dishwasher except for:
– the brew unit
– the coffee bean container
– the stainless steel milk flask and lid
– the cover to the central spout.
If the parts are cleaned frequently in a
dishwasher, they can become
discoloured from regular contact with
food residues (e.g. tomatoes) in the
dishwasher, or the surface can become
damaged.
Rinse the system
Before switching the machine off for
any length of time, the pipework, brew
system and central spout need to be
cleaned.
If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually.
Place the smaller of the two containers
under the central spout.
Maintenance
q r H I J L n m C
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse the system" and touch
the OK sensor.
^ Select "Start" and touch the OK
sensor.
The main menu will reappear in the
display after the pipework has been
rinsed. The machine can then be
switched off.
Cleaning and care
46
Page: 46
Milk pipework
Rinse milk pipework
To prevent milk going off in the
machine and the pipework getting
clogged up, it should be rinsed through
after use. Rinsing is not a substitute for
cleaning the pipework through at the
end of the day.
Maintenance
q r H I J L n m C
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse milk pipework" and
touch the OK sensor.
^ Select "Start" and touch the OK
sensor.
Follow the instructions in the display.
To rinse the pipework in the lid for
the stainless steel milk flask, fill the
larger of the two plastic containers
to the "max." mark with cold water.
Fit the lid from the milk flask to the
container, making sure that it
engages correctly. Hang it in the
machine where the stainless steel
milk flask normally sits.
Clean milk pipework
To prevent milk going off in the
machine and the pipework getting
clogged up, it should be cleaned at the
end of each day using the cleaning
agent supplied.
^ If the milk pipework in the lid is
clogged, use the cleaning brush to
clean it under running water.
Insert the brush in the pipework and
move it back and forth as far as it will
go until all the milk deposits are
removed.
Maintenance
q r H I J L n m C
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Clean milk pipework" and
touch the OK sensor.
^ Select "Start" and touch the OK
sensor.
The display will let you know the current
status of the machine or what action
needs to be taken.
^ Follow the instructions step by step.
Cleaning and care
47
Page: 47
To clean the pipework in the lid for
the stainless steel milk flask, fill the
larger of the two plastic containers
to the "max." mark with lukewarm
water to dissolve the cleaning agent.
Fit the lid from the milk flask to the
container, making sure that it
engages correctly. Hang it in the
machine where the stainless steel
milk flask normally sits.
It is important to use the Miele
cleaning agent as it has been
developed for this coffee machine. It
is available via the internet at
www.miele-shop.com (depending on
country), from your Miele Chartered
Agent or from Miele.
The milk pipework will now be cleaned.
The pipework is clean once Prog.
finished appears in the display. You
can then switch the machine off.
Clean milk pipework of any
blockages
If you are getting steam instead of milk
from the central spout the milk
pipework in the machine is probably
blocked.
^ Take the lid off the central spout. Pull
the jets out of the central spout. (See
"Central spout").
^ Open the door.
^ Remove the stainless steel milk flask
and clean it making sure you
thoroughly clean the area around the
handle (see "Stainless steel milk
flask").
^ Release the cover to the milk
pipework by pressing the tabs in on
the left and right-hand sides.
Cleaning and care
48
Page: 48
^ Take the cover off together with the
milk pipework. Clean the whole
component in the dishwasher without
dismantling it.
If there is still residual milk in the
pipework after this, use the cleaning
brush supplied to remove it. To do so,
dismantle the cover and the milk
pipework as follows:
Do not take the milk pipework out of
its holder. This could cause the
pipes to leak.
^ Press down on the small recess in
the spout's holder (a) and pull the
holder forwards and out (b). Loosen
the milk pipework from its guides.
^ Take hold of the second holder by
pin (c) and pull it upwards and off.
The hoses can now be cleaned with a
brush under running water.
^ Push the brush into both milk pipes
from below. Move the brush in and
out of the pipes as far as it will go
until there are no milk residues left in
them.
Re-assemble the milk pipework as
follows:
^ Fit the holder with the plug into the
cover as shown. Make sure that the
holder fits correctly on the cover.
Cleaning and care
49
Page: 49
^ Now push the milk pipes into the
guides (a) and push the spout
holder (b) back on. It should click
into place.
^ Fit the cover with the milk pipes back
into position behind the machine
front.
^ Re-fit the central spout (see "Central
spout").
Stainless steel milk flask
The stainless steel milk flask and lid
must be washed by hand using hot
water.
It is important to keep the top of the
flask and the seals clean (whilst filling it
and carrying it). Any soiling can lead to
a malfunction of the flask in the
machine.
^ Clean the stainless steel flask with
hot water after use to remove any
residual milk.
^ Clean the handle under the tap and
then clean it thoroughly with a clean
damp cloth to remove any milk
residues.
^ If the milk pipework in the lid is
clogged, use the cleaning brush to
clean it under running water.
Insert the brush in the pipework and
move it back and forth as far as it will
go until all the milk deposits are
removed.
Cleaning and care
50

Question & answers

how to clean out a ground coffee chute?

Published on 1 year ago by kim

How do I get the fit jets in central spout off the screen? Thanks

Published on 2 years ago by Mindy

Ask a question about the Miele CVA 5060

Have a question about the Miele CVA 5060 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Miele CVA 5060. Please make sure that you describe your difficulty with the Miele CVA 5060 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.