Miele CSWA 400 manual

View a manual of the Miele CSWA 400 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Miele
  • Product: Kitchen Scale
  • Model/name: CSWA 400
  • Filetype: PDF
  • Available languages: Dutch, English, German, Danish

Table of Contents

Page: 46
Afmetingen
aKlemveren
Montage
47
32
a
a
50
266
500
a
a
50
50
+
-1
+
-1
8
288
514 32
Page: 50
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
General notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Inserting the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cleaning for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Changing from metric to imperial measurements . . . . . . . . . . . . . . . . . . . . . . . . . 56
Switching on and weighing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Calibrating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Over loading / under loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Switching off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Technical data and After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Data Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Appliance and building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Contents
51
Page: 51
Appliance surface
Battery compartment/
underneath the appliance
aWeighing surface
bControl
cDisplay
dBuilding-in frame
eBattery compartment lid
f9V battery
gBattery clip
Description of the appliance
52
a
d
c b
e
f
g
Page: 52
To avoid the risk of accidents and
damage to the appliance you
should read these operating
instructions carefully before using it for
the first time. They contain important
notes on the safety, operation and care
of the appliance.
This appliance is intended for
domestic use only and is not to be
used for commercial purposes.
Do not drop pots, pans or other
objects on the ceramic surface.
Even a light object could cause the
ceramic surface to crack or break in
certain circumstances.
To avoid damage such as
scratches or marks on the surface
please note the following:
– Do not use knives to cut food on the
weighing surface.
– Never push pots and pans etc. back
and forth across the weighing
surface. Soiling such as sand can
also cause scratches to occur.
– Never place hot, dirty or damp
containers or pans etc. on the
weighing surface. Please note that
soiling containing starches or acids
can cause marks to appear which
cannot be removed.
Never place hot pots or pans near
the display area. The electronic
unit underneath could get damaged.
Keep hot pans etc away from the
control. The lacquering on it is not
heat-resistant.
Do not let liquid get into the
building-in frame through the gap
around the appliance. This could
damage the electronic unit. If liquid
does get into the building-in frame,
wipe it up immediately to avoid any
damage or unpleasant odours building
up.
Also make sure that food particles
cannot get lodged in the gap
around the appliance or get into the
building-in frame. This could result in
an incorrect weight being shown in the
display.
Only lift the ceramic weighing
surface up by the control. Do not
use any metal implements to lift it up.
These could scratch the frame.
Do not use a steam cleaner to
clean this appliance. Pressurised
steam could cause permanent damage
to the surface and to components, for
which the manufacturer cannot accept
liability.
While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee is invalidated.
Warning and Safety instructions
53
Page: 53
Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Disposal of an old appliance
Old appliances contain materials which
can be reclaimed or recycled. Please
contact your dealer, your local waste
collection centre or scrap merchant
about potential recycling schemes.
Used batteries should be disposed of
safely.
Caring for the environment
54
Page: 54
General notes
A data plate for your appliance is
supplied with this documentation. It
should be stuck into the space
provided at the end of the instruction
book.
Keep these instructions in a safe place
for reference and pass them on to any
future user.
Inserting the battery
Before the weighing function can be
used, the battery supplied must be
inserted into the appliance.
Cleaning for the first time
Before using for the first time, clean the
appliance with a damp cloth only and
then wipe dry.
Before using for the first time
55
Page: 55
Changing from metric to
imperial measurements
The weight can be displayed in kg or in
lb/oz. You can only change from one to
the other when the weighing function is
switched off.
Altering the weight measurement
unit
^ Press the control for about 5
seconds.
The measurement unit currently
selected will appear in the display.
^ To change the measurement unit
displayed, press the control briefly.
^ Then press the control again for
approx. 5 seconds until "88888"
appears in the display.
The measurement unit selected is now
stored in memory.
If you try to do this with the weighing
function switched on, "C 100" will
appear in the display.
Remove any food which has been
placed on the surface and wait 2
minutes for the weighing function to
switch off automatically.
Now start again from the beginning.
Switching on and weighing
^ Switch on the weighing function by
pressing the control.
"88888" will appear in the display first of
all, followed automatically by
"0.000" kg or
"0: 0.0" lb/oz .
The weighing function is now ready for
use.
^ If possible, the items to be weighed
should be placed in the middle of the
weighing surface.
The weight will appear in the display.
Operation
56
Page: 56
Calibrating
You can calibrate the weighing
function, i.e. set the display back to
zero, to add items to those already
weighed.
^ Press the control until the zeros
appear in the display.
You can calibrate it again if you want to
weigh additional items.
Finally you can call up the total weight
in the display by calibrating the
weighing function once again and then
removing all the items.
The total weight will be displayed with a
(-) in front of the amount.
Over loading / under loading
If the item(s) being weighed is more
than 10 kg / 22 lb "- - - - -" will appear
in the display.
If the item(s) being weighed is less than
0.015 kg / 0.6 oz, a value will appear in
the display. However, this value will be
incorrect as the appliance is not
designed for items less than 0.015 kg /
0.6 oz.
Switching off
^ Press the control until "0.000" kg or
"0: 0.0" lb/oz appears in the display.
^ Switch off the weighing function by
pressing the control again.
If the weighing function is not used for a
period of two minutes, it will switch itself
off automatically.
Operation
57
Page: 57
The battery needs replacing approx.
every 2 years. When it does, the
following will appear in the display:
A 9V battery PP3 is required.
Proceed as follows:
^ Lift the ceramic weighing surface up
by the control.
^ Pull the weighing surface out with
both hands and place it with the
underside facing upwards on a
clean, smooth surface.
^ Open the battery compartment lid.
^ Remove the used battery and take off
the battery clip.
^ Secure the battery clip to the new
battery and once connected, place
the battery in the battery
compartment.
^ Close the battery compartment lid
firmly making sure that it clicks into
place.
^ Place the weighing surface back on
to the building-in frame.
Only lift the ceramic weighing
surface up by the control. Do not
use any metal implements to lift it
up. These could scratch the frame.
Used batteries should be disposed
of safely.
Replacing the battery
58
Page: 58
Under no circumstances use a
steam cleaning appliance to clean
this appliance. Pressurised steam
could cause permanent damage to
the surface and to components, for
which the manufacturer cannot
accept liability.
Only lift the ceramic weighing
surface up by the control. Do not
use any metal implements to lift it
up. These could scratch the frame.
Never use abrasive or aggressive
cleaning agents, such as grill or
oven cleaning sprays, stain or rust
removers, scouring agents, pads or
sponges as these could damage the
surface of the appliance.
The ceramic surface of the appliance
should be cleaned after each use. Also
check the frame after each use and
remove any food debris or liquid imme-
diately. Clean the building-in frame
regularly.
Use a damp cloth or a solution of
washing up liquid and hot water, as
necessary.
For more stubborn soiling, a cleaning
agent specially designed for cleaning
ceramic surfaces may be used. After
cleaning, wipe the surface with a damp
cloth to avoid smearing.
Finally, wipe dry the whole appliance
using a clean, soft cloth.
Cleaning and care
59
Page: 59
Technical data
Load bearing capacity:
10 kg / 22 lb
Accuracy of the scales:
} (accurate to 1 % + 1 digit)
This equates to 1 % of the actual weight + 5g / 0.2oz
Battery:
9V battery, PP3
Technical data
60
Page: 60
In the event of any faults which you cannot remedy yourself, please contact
– Your Miele Dealer
or
– The Miele Service Department (see address on back cover).
When contacting the Service Department, please quote the model and serial
number of your appliance. These are given on the data plate.
Data Plate
Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the front of these operating
instructions.
Please note that telephone calls may be monitored and recorded to improve
our service.
After sales service
61
Page: 61
Appliance and building-in dimensions
aSpring clamps
Installation
62
32
a
a
50
266
500
a
a
50
50
+
-1
+
-1
8
288
514 32
Page: 62
aSpring clamps
bSpacer bar
cGap between spacer bar and
worktop
eSilicone sealant
Installation
63
b
Page: 63
Fixing spring clamps / spacer bars in granite worktops
aSpring clamps
bSpacer bar
dDouble sided adhesive tape
eSilicone sealant
Installation
64
Page: 64
Installation
Dimensions 7 mm and 11 mm show the
space taken up by the frame of the
appliance on the worktop.
^ Make a cut-out in the worktop, paying
attention to the appliance height.
Dimension "B" applies to a number of
appliances and is shown on the chart.
^ A minimum safety distance of 50 mm
must be maintained between the
appliance and the back wall and a
side wall to the right or left.
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
Worktop cut-out
Number of
appliances
Depth
in mm
± 1 mm
Width
(= Dim B)
in mm
± 1 mm
1
2
3
4
5
6
7
500
500
500
500
500
500
500
266
554
842
1130
1418
1706
1994
Important:
The maximum tolerance for the worktop
cut-out must not exceed ± 1 mm.
When building in several combiset
appliances, a spacer bar must be
fitted between each unit.
Installation
65

Question & answers

There are no questions about the Miele CSWA 400 yet.

Ask a question about the Miele CSWA 400

Have a question about the Miele CSWA 400 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Miele CSWA 400. Please make sure that you describe your difficulty with the Miele CSWA 400 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.