Medisana FTD manual

View a manual of the Medisana FTD below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Medisana
  • Product: Thermometer
  • Model/name: FTD
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Finnish, Polish

Table of Contents

Page: 2
3
FTD Thermometer
1
2
3
4
5
16 15 14 13 12 11 10
8
7
9
6
Page: 12
13
GB
FTD Thermometer
Please read the following usage instructions
carefully before using the FTD thermometer,
and keep them in a safe place.
1 Battery compartment cover
On / Scan button
Display
Sensor cover
Stand
Sensor
Name plate
Knob for opening battery compartment
Time setting button
Memory symbol
- for last stored temperature
Battery symbol
- for indicating low battery charge
Clock symbol
- for displaying the time
Celsius symbol
- for body temperature
- for ambient temperature
Symbol for measuring temperature at forehead
Symbol for measuring temperature in the ear
Symbol for continuous temperature measurement
Device
components
Display symbols
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Page: 13
14
1 Introduction
GB
Thank you for buying our product, and congratulations! You are now
the owner of the FTD thermometer, which is a quality product made
by MEDISANA. In order to successfully use the product and ensure
that your MEDISANA FTD thermometer has a long service life, we
recommend that you read these usage instructions carefully and keep
them in a safe place.
The FTD thermometer can be used to take ear or forehead temperatu-
re measurements. The device also measures the ambient temperatu-
re and displays the time.
Please first check whether the delivery is complete.
The packaging is reusable or can be recycled. Packaging that is not
longer required must be disposed of properly. If you discover any
transport damage when unpacking, please contact your dealer imme-
diately.
WARNING
Please keep the packaging film away from children.
Risk of suffocation!
• Only use the device for its correct purpose of use, as described in
the usage instructions. Using the device for any other purpose will
invalidate the warranty.
• The device is not intended for commercial use.
• Do not allow children to use the device. Medical products are not
toys!
• In the event of faults or damage do not repair the device yourself,
since this will invalidate all warranty claims. Contact your specialist
dealer and always have repairs carried out by authorised service
workshops.
• Do not immerse the thermometer in water or any other liquid. If
the device is penetrated by moisture, remove the battery and do
not carry out any further measurements with the thermometer.
Contact your specialist dealer or MEDISANA before using the
device again.
• Do not shake or knock the thermometer.
• Do not expose the thermometer to extreme temperatures for long
periods, e.g. in a vehicle standing in direct sunlight.
1.1
Thank you
1.2
Scope of
delivery
1 MEDISANA
FTD
thermometer,
incl. battery
1 Stand
1 Set of usage
instructions
1.3
General
instructions
Page: 14
15
GB
2 Start-up
The scope of delivery includes a battery (3 V CR2032). A low battery
charge is indicated by the battery symbol in the lower area of
the display .
In this case the battery should be replaced as soon as possible. When
the battery capacity has been used up, the symbol “Lo” appears in
the display as well as the flashing battery symbol and a
beep is heard (see fig.).
The thermometer can no longer be used without changing the
battery. Press the On/Scan button to switch off the device.
This thermometer is equipped with a safety catch in order to keep the
battery away from children. Push in the knob for opening the battery
compartment with a pointed object and remove the battery
(Fig.). A 3 V CR2032 lithium battery is required for this thermometer.
The battery must be inserted with the positive terminal (+) on top.
BATTERY SAFETY INSTRUCTIONS
• Keep away from children! • Do not recharge!
• Do not short-circuit! • Do not throw in the fire!
• Do not throw used batteries away with the domestic
rubbish. Please put them in the special rubbish or a battery
collecting station in a specialist dealer’s shop.
When the thermometer is used for the first time or after a battery
change, the time must first be set. Then the ambient temperature
measuring mode is automatically activated.
2.1
Battery
display
2.2
Battery
change
2.3
Time and
ambient
temperature
Knob for opening battery compartment
11
2
8
11
3
3
Page: 15
16
2 Start-up
GB
2.5
Before you
start to use
the device…
Open the battery compartment by pressing the knob for opening the
battery compartment with a pointed object and removing the
battery compartment cover . Press the button for setting the time
until the hour display flashes. The hours are set by pressing the
On/Scan button several times until the required hour setting is
reached (see Fig.).
You can now switch from the hour setting to the minute setting by
pressing the time setting button again . The minute display flash-
es. Adjust the minute setting in the same way that you adjusted the
hour setting. When you have set the time, press the time setting but-
ton again as confirmation (see Fig.).
The display of the device now alternates between the time and
the ambient temperature (see Fig.).
• The thermometer is equipped with an encapsulated sensor .
Special protection caps are not required.
• The sensor of the thermometer must be kept clean and intact
at all times in order to guarantee that the measurements are ac-
curate.
• Ear wax affects the measuring accuracy. If necessary, clean your ear
and the sensor tip of the thermometer before measuring in order
to avoid erroneous measurements.
• If the ambient temperature exceeds the designated range of 16 °C
to 40 °C when the ambient temperature is being measured, "Err"
will appear in the display .
2.4
Setting
the time 1
6
9
2
6
9
9
8
3
3
Page: 16
17
GB
3 Measuring procedure
3.3
Taking body
temperature
measure-
ments
• Do not measure your temperature immediately after eating,
training or bathing. Wait for half an hour.
• Do not take successive measurements at intervals of less than one
minute. If you have to take your temperature at shorter intervals,
the results may fluctuate slightly.
• The human body temperature fluctuates within a natural range.
There is no such thing as a standard body temperature.
• Measure and record your body temperature on normal days. This
will allow you to detect a fever more easily.
• In order to make an accurate measurement in the ear, the sensor
must be directed at the eardrum and be inserted far enough into
the ear canal.
• Some people will have different readings for the right and left ears.
Always measure the same person in the same ear when measuring
temperature changes.
• The measurements can also be influenced by your sleeping position.
If someone has slept on a particular ear for a considerable period,
the temperature will be higher than normal in this ear. In this case,
measure in the other ear or wait for a few minutes before
measuring.
This thermometer optimises the conditions automatically during the
temperature measurement. If the measuring system is still not ready
to take a measurement, either the ear temperature or the
forehead temperature symbol illuminates (see Fig.). At the same
time, rapid, brief successive beeps can be heard. In this case, stop
measuring by pressing the On/Scan button . Do not continue with
the temperature measurement until the symbol goes dark and the
beeping stops.
In order to change from forehead measurement to ear measurement,
simply remove the sensor cover . When you wish to change back
again, replace the cover.
ATTENTION
Forehead temperatures should only be taken for checking
purposes, since the skin temperature at the forehead is
easily affected by outside influences, meaning that the
measurement can be falsified.
3.2
The best
prerequisites
3.1
Notes on
temperature
measurement
2
14
15
4
Page: 17
18
3 Measuring procedure
GB
To measure the temperature in your ear, first remove the sensor
cover .
Press the On/Scan button .
If the display is showing the time or the ambient temperatu-
re, press the On/Scan button again . The last temperature that
was measured is displayed (see Fig.).
If the symbol for temperature measurement in the ear appears
in the display , two short beeps will be heard and the device
is ready for use (see Fig.).
Press the On/Scan button again .
As soon as the symbol for continuous temperature measurement
appears (see Fig.), insert the sensor in your ear. Keep the
device still whilst measuring. After just a few seconds a short
beep will be heard and the display will show the measured
body temperature.
After the temperature has been measured, the device automatical-
ly switches to the time and ambient temperature display mode.
To measure the body temperature at your forehead, the sensor
cover must be attached.
Press the On/Scan button .
If the display is showing the time or the ambient temperatu-
re, press the On/Scan button again. Two beeps will be heard,
and the last temperature that was measured will appear on the
display (see Fig.).
Press the On/Scan button again. The symbol for temperature
measurement at the forehead appears on the display (see
Fig.). The device is ready for use.
Hold the device with the sensor against the centre of your
forehead and press the On/Scan button . Hold down the
On/Scan button and drag the thermometer from the centre
of your forehead to the side, as far as your temple. When you
reach this position, release the button.
3.4
Measuring the
temperature in
your ear
3.5
Measuring the
temperature
at your
forehead
4
16
2
3
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
3
3
3
6
2
2
15
2
2
3
4
6
14
2
2
3
2
Stretch your ear
canal by pulling
your ear backwards
and upwards and
carefully insert the
sensor into the ear.
Page: 18
19
GB
3 Meas. procedure / 4 Miscellaneous
• The most important and sensitive part of the thermometer is
the sensor . Accurate temperature measurements can only be
guaranteed if the probe is clean and intact.
• The sensor is waterproof and can therefore be cleaned by
directly immersing it in alcohol or using a ball of cotton wool
soaked in alcohol.
• Normal commercial alcohol-based disinfectant is suitable for disin-
fecting the sensor . Please follow the respective manufactu-
rer’s instructions.
• The housing and the display of the thermometer are not
waterproof. Do not immerse them in liquids.
• Clean them with a dry, clean cloth. Do not use aggressive cleaners.
• It is advisable to keep the thermometer in the original packing that
it was in when it was purchased, and keep it in a clean, dry place.
Do not expose the thermometer to direct sunlight.
• The storage temperature should be between -20.0°C to +50.0°C.
• The device is calibrated in the factory. Recalibration is not required
for normal use.
Dispose of your old electrical unit in an environmentally acceptable
manner when it has reached the end of its service life! Packaging is
re-usable or may be recycled; metal parts must be disposed of as scrap
metal; plastics, electrical and electronic components must be disposed
of as electroscrap.
Remove the battery before disposing of the device. Do not throw
batteries away in the domestic rubbish: put them in the special wast
or a specialist dealer's battery collection station.
Consult your municipal authority or your dealer for information about
disposal.
4.1
Care and
storage
4.2
Disposal
3
6
6
6
When temperature measurement is complete, you will hear a
beep and the body temperature will appear in the display .
The device will then automatically go into time and ambient tem-
perature mode.
If the measured temperature is outside the permitted range, “Lo”
or Hi” will be displayed.
6.
7.
8.
3
Page: 19
20
4 Miscellaneous
GB
Model : MEDISANA FTD thermometer
Displayed
Temperature range : 10 0
C – 50 0
C
Measuring accuracy : ±0.3 °C at less than 35.5 °C
or above 42.0 °C,
±0.2 °C between 35.5 °C and 42.0 °C
Clinical repeatability : ±0,1 °C
Display resolution : 0,1 0
C
Operating temperature : 16.0 °C to 40.0 °C
at 95 % max. relative humidity
Storage temperature : -20.0 °C to +50.0 °C
at 95 % max. relative humidity
Battery 1 x 3 V CR2032 lithium battery
Battery service life : approx. 500 measurements
Protection class : BF
Dimensions : approx. 109 mm x 30 mm x 22 mm
Weight : approx. 45 g including battery
Article No. : 77050
EAN Code : 4015588770500
This device complies with the regulations of EEC directive 93/42 for
medical products.
Right reserved to make technical and design changes during the
course of continuous product improvement.
4.3
Technical
data
Page: 20
21
GB
5 Warranty
Please contact your dealer or the service centre in case of a claim
under the warranty. If you have to send in the unit, please enclose a
copy of your receipt and state what the defect is.
The following warranty terms apply:
1. The warranty period for MEDISANA products is three years from
date of purchase. In case of a warranty claim, the date of purchase
has to be proven by means of the sales receipt or invoice.
2. Defects in material or workmanship will be removed free of charge
within the warranty period.
3. Repairs under warranty do not extend the warranty period either
for the unit or for the replacement parts.
4. The following is excluded under the warranty:
a. All damage which has arisen due to improper treatment, e.g.
nonobservance of the user instructions.
b. All damage which is due to repairs or tampering by the customer
or unauthorised third parties.
c. Damage which has arisen during transport from the manufacturer
to the consumer or during transport to the service centre.
d. Accessories which are subject to normal wear and tear.
5. Liability for direct or indirect consequential losses caused by the
unit are excluded even if the damage to the unit is accepted as a
warranty claim.
Please do not hesitate to contact us if you have questions about this
or any other product.
MEDISANA AG
Itterpark 7-9
D-40724 Hilden
Tel.: +49 (0) 2103 / 2007-60
Fax: +49 (0) 2103 / 2007-626
eMail: info@medisana.de
Internet: www.medisana.de
The service centre address is shown on the last page.
5.1
Warranty and
repair terms
Page: 96
D
Medisana AG
Itterpark 7-9
D-40724 Hilden
Tel.: 0 21 03-20 07-60
Fax: 0 21 03-20 07-626
eMail: info@medisana.de
Internet: www.medisana.de
Im Servicefall wenden Sie sich bitte an:
Medisana Servicecenter
Feuerbach KG
Corneliusstraße 75
D-40215 Düsseldorf
Tel.: 0211-38 10 07
(Mo-Do: 9-13 Uhr/14-17 Uhr,
Fr: 9-13 Uhr)
Fax: 0211-37 04 97
eMail: medisana@t-online.de
GB
MEDISANA HEALTHCARE UK LTD.
City Business Centre 41 St.
Olav’s Court Surrey Quays
London SE16 2XB
Tel.: + 44/207-237 88 99
Fax: + 44/207-252 22 99
eMail: info@medisana.co.uk
Internet: www.medisana.co.uk
F / NL / B / L
Medisana Benelux NV
Euregiopark 18
6467 JE Kerkrade
Tel.: + 31/45-5 28 03 89
Fax : + 31/45-5 23 35 18
eMail: info@medisana.nl
I
SANICO S.R.L.
Via G. Ferraris 31
20090 Cusago (MI)
Tel.: + 39/02-90 39 00 38
Fax: + 39/02-90 39 02 79
eMail: info@sanicare.it
Internet: www.sanicare.it
E
MEDISANA HEALTHCARE, S.L.
Plaza Josep Freixa i Argemí, no 8
08224 Terrassa (Barcelona)
Tel.: + 34/93-73 36 70 7
Fax: + 34/93-78 88 65 5
eMail: info@medisana.es
Internet: www.medisana.es
P
GRUPO RP
Avda. D.Miguel,
330 -Zona Industrial
4435-678 Baguim do Monte
Tel.: +35/12-29 75 69 64
Fax: +35/12-29 75 60 15
eMail: rickiparodi@mail.telepac.pt
Internet: www.medisana.pt
FIN
D&L Marketing Oy
Juvan teollisuuskatu 23
02920 Espoo
Tel.: + 358/9-85 53 08 0
Fax: + 358/9-85 53 08 30
eMail: jan.lindfors@dlmarketing.fi
Internet: www.dlmarketing.fi
S
ALERE Electronics AB
Stormbyvägen 2-4
163 29 SPÅNGA
Phone: +46 8 761 24 31
Fax: +46 8 795 42 05
Internet: www.alere.se
GR
Medisana Hellas
Kosma Etolou & Kazantzaki 10
141 21 N. Iraklion
Tel.: +30/210-2 75 09 32
Fax: +30/210-2 75 00 19
eMail: info@medisana.gr
Internet: www.medisana.gr
Adressen

Question & answers

How change Fareineigh to celsius ? I am unable to do that !

Published on 2 years ago by Girard

Please, can you send me a PDF file of the manual of Medisana FTD in greek language, because i can't print the manual from the site. Thank's a lot for your time. Marios Alexopoulos Greece

Published on 3 years ago by MARIOS ALEXOPOULOS

How to change c• to fahrenheit

Published on 3 years ago by Ross

Ask a question about the Medisana FTD

Have a question about the Medisana FTD but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Medisana FTD. Please make sure that you describe your difficulty with the Medisana FTD as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.