Logitech P710E manual

Select a language NL 100%

View a manual of the Logitech P710E below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Logitech
  • Product: Speakerphone
  • Model/name: P710E
  • Filetype: PDF
  • Available languages: ,

Table of Contents

Page: 2
Logitech Mobile Speakerphone P710e
3
Contents
English . . . . . . . . . . . . . . . . . 4 Français. . . . . . . . . . . . . . . . . 9
Page: 3
Logitech Mobile Speakerphone P710e
4  English
Product Features
1.	Increase volume
2.	Microphone mute
3.	Call end
4.	Call answer
5.	Decrease volume
6.	USB cable
7.	Power
8.	Bluetooth pairing
9.	Battery indicator light
10.	Headphone jack
11.	NFC target area
3
5
4
1
6
7 89 11
10
2
Page: 4
Logitech Mobile Speakerphone P710e
English  5
Power button Powers on or off the P710e
Bluetooth pairing button Press and hold until blue lights appear in a clockwise circle
on the top of the device to place P710e in pairing mode
Battery level indicator Will show green once fully charged, red indicates 30 minutes
of battery life left, and flashing red indicates charging
Call answer button Press to answer calls
Call end/reject button Press to end a call or reject an incoming call
Volume up button Press to increase speaker volume
Volume down button Press to decrease speaker volume
Microphone button Press to mute or unmute the microphone
NFC target area Place the NFC antenna of your mobile device near the target
area to pair or connect/disconnect
We recommend you charge the P710e prior to first use. You can charge by either using
the enclosed AC adapter or by connecting to a USB port on a computer—although the AC
adapter charges more quickly.
Charge times with the AC adapter
15 minutes of charge Provides about 2 hours of talk time
1/2 hour of charge Provides about 4 hours of talk time
3 hours of charge Provides about 15 hours of talk time
Page: 5
Logitech Mobile Speakerphone P710e
6  English
Inserts/sliding top
The top of the P710e can be slid back to reveal
a concealed stand for your mobile device.
This stand is especially useful when using
your mobile device for video conferences for
greater stability of the image for those on the
other end of the call.
There is an insert that can be used in the
concealed stand to adjust to the size of
your mobile device. The insert can be placed
in two ways as illustrated.
The approximate size of mobile device
that will fit in the concealed stand is:
Side 2: 0mm–8.5mm
Side 1: 8.5mm–10.5mm
Page: 6
Logitech Mobile Speakerphone P710e
English  7
Setup with a computer
•	Connect the USB cable from the P710e into
your PC.
•	Ensure that the P710e is selected as the
default audio device in your OS settings and
in your application.
Setup with a Bluetooth device
•	Press and hold Power button to turn ON
the device.
•	Press and hold the Bluetooth button
on the side of the P710e until the blue
lights start flashing in a clockwise circle.
Place your mobile device in pairing mode
and pair to the P710e. You may pair up to
eight Bluetooth devices with only two active
at the same time.
•	If you have an NFC enabled device, position
it near the NFC target area on the P710e.
You should see a message on your phone
asking if you would like to pair to the P710e.
–
– P710e must be powered on.
–
– Note, position your NFC enabled device
near the NFC target area a second
time to disconnect from the P710e.
This is helpful if you’re still in range
of the P710e, but want to handle calls
on the mobile device.
–
– Repeat the procedure again
to reconnect.
USB
Page: 7
Logitech Mobile Speakerphone P710e
8  English
Troubleshooting
Bad or no audio?
•	Check if USB cable is fully inserted into
the computer’s USB port.
•	Check that your mobile device is paired
with the P710e
•	Using a non-powered USB hub may degrade
product performance.
•	Check the volume level in both your media/
voice application and your PC.
•	Try restarting your media/voice application.
Ensure the microphone is not muted.
•	Make sure the Logitech P710e Speakerphone
is the default audio device.
Windows Vista, Windows 7:
–
– Close all media/voice applications
–
– Go to Start/Control Panel/ Sound/
Playback Devices tab.
–
– Choose Logitech P710e.
–
– Click on Set Default.
–
– Click on the “Recording” tab.
–
– Choose Logitech P710e.
–
– Click on “Set Default”.
–
– Restart your media/video application.
Windows 8:
–
– Close all media/voice applications
–
– From the Start Menu,
select “Desktop” tile.
–
– From the Charms menu,
select Settings>Control Panel>
Hardware and then Sound.
–
– Go to Sound and select the
“Playback” tab.
–
– Choose Logitech P710e
–
– Click on Set Default.
–
– Click on the “Recording” tab.
–
– Choose Logitech P710e.
–
– Click on “Set Default”.
–
– Restart the media/video application.
Mac 10.6 X and above:
–
– Close all media/voice applications
–
– Open System Preferences.
–
– Select Sound/ Output tab,
and then select Logitech P710e”.
–
– Restart media/video application.
For additional support, please visit us
at www.logitech.com/support

Question & answers

There are no questions about the Logitech P710E yet.

Ask a question about the Logitech P710E

Have a question about the Logitech P710E but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Logitech P710E. Please make sure that you describe your difficulty with the Logitech P710E as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.