LG LDF7811BB manual

View a manual of the LG LDF7811BB below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: LG
  • Product: Dishwasher
  • Model/name: LDF7811BB
  • Filetype: PDF
  • Available languages: English, Spanish

Table of Contents

Page: 1
- 3 -
1. CAUTION......................................................................................................................... 4
2. SPECIFICATIONS ........................................................................................................... 5
3. WIRING DIAGRAM........................................................................................................ 6
4. FEATURES & TECHNICAL EXPLANATION ................................................................... 7
5. PARTS NAME................................................................................................................ 16
6. PROGRAM CHART ..................................................................................................... 19
7. HOW TO DISASSEMBLE ............................................................................................ 21
8. TROUBLE SHOOTING METHODS.............................................................................. 30
A. TROUBLE SHOOTING ACCORDING TO DISPLAYED ERROR MESSAGE...........30
B. TROUBLE DIAGNOSES AND REPAIR BY SYMPTOM........................................... 32
9. INSTALLATION INSTRUCTION ................................................................................... 36
10. EXPLODED VIEW .......................................................................................................43
11. REPLACEMENT PART LIST ........................................................................................52
CONTENTS
Page: 2
- 4 -
DISCONNECT POWER CORD BEFORE SERVICING
RECONNECT ALL GROUNDING DEVICES
IMPORTANT SAFETY NOTICE !
This service information is intended for individuals
possessing adequate backgrounds of electrical,
electronic and mechanical experience.
Any attempt to repair this appliance may result in
personal injury and property damage.
The manufacturer or seller can not be responsible
for the interpretation of this information, nor can it
assume any liability in connection with its use.
CAUTION !
Page: 3
- 5 -
2. SPECIFICATION
Rated Voltage / Frequency AC 120V/60Hz
Installation Built-In
Place Settings 16
Product Dimension(in) 23 7/8 x 25 x 33 7/8
Product Weight(lbs) 7811/ 7810 series : 115lbs, 5811/ 6810 series : 110lbs
Door Color White, Black, Stainless
Tub Material Stainless Steel
Control Electronic
Rated Power(Watt) 1,350
Heater Power(Watt) 1,200
Programs 7811/ 7810 series : 6, 6810 series : 5
Upper Rack Position 7811/ 7810 series : Adjustable, 5811/ 6810 series : manual
Lower Rack 50% Fold down
Water Consumption 21-30 (Normal)
Power Consumption(kWh/year) 352~370
Operating Time (min) 101-135 (Normal)
Fan Dry System Yes
Delay Start Function Yes
Auto-Off Power Switch Yes
Process Monitor Yes
Wash Level 5
Racks Nylon Coating
Operating Water Pressure (Bar) 20-120 (140-830kPa)
ITEM SPECIFICATION
Page: 5
- 7 -
4. FEATURES & TECHNICAL EXPLANATION
4-1. Product Features
If you raise the Upper Rack, you can load large dishes in the Lower Rack.
(Max. 14 in.)
The tall tub provides large dishes loading as well as large capacity.
LG dishwashers let you load oversized items in the Lower and Upper Rack.
Newly introduced Slim Direct Inverter motor is inverter-controlled. Speed is
controlled based on program selection. It also offers high energy efficiency to
minimize energy loss.
This is one of the best performance solutions for drying dishes because it
minimizes venting humid air to the outside of the dishwasher. In addition, this
system ensures better drying results compared to the condensing drying
system.
Because of alternating water spray between the Upper and Lower
Rack, the water pressure allows superior performance and reduced
consumption of water and electricity.
For best wash results, the self-cleaning filter system continuously cleans the
water as it circulates. Your LG dishwasher has a self-cleaning filter that grinds
food into small particles before it goes down the drain.
Ultra Big Capacity
Slim Direct Inverter Motor
Hybrid Drying System
Vario Spray System
Self Cleaning Filter
Moist
Air
Dry
Air
Mixed
Air
to
Upper
Arm
to
Lower
Arm
Soil Sensor
Fine Mesh
to Drain
Page: 6
- 8 -
4-2. Display Panel
4-2-1. LDF 7811/7810 Series
PROGRAM
• Press the program that
corresponds to your
desired wash cycle.
CANCEL
• To cancel a running
program, open the door,
then press and hold the
Normal and Delicate
buttons for 3 seconds.
INDICATOR
• Child lock: Lamp will turn on
when Child Lock setting is on.
• Rinse Aid: Refill with Rinse aid
when Lamp turns on.
This program is for very heavily soiled loads including pots,
pans and casserole dishes which may have dry food residue.
This program is for very heavily soiled loads
This program is for normally soiled everyday loads.
This program is for washing delicate items like glasses.
This program is for that quick wash of lightly soiled recently
used dishes and cutlery.
This program is for very lightly soiled loads.
Soak
Normal
Quick Wash
Rinse Only
Delicate
Power Scrub
Control panel may vary on some models.
Page: 7
- 9 -
SPRAY
(INTENSITY)
• Repeated pressing of the
Spray button will select
Strong, Medium or
Soft.
DELAY START
• If you want to delay the start of
a selected program, press the
Delay Start button.
• Each press of Delay Start will
delay the start of the cycle by
one hour.
• The delay start time can be
adjusted from 1 to 24 hours in
one-hour increment.
HALF LOAD
• In case of a small load, use the
upper or lower rack only to save
energy.
• Each press of the Half Load
button cycles between upper
rack only and lower rack only.
• If you don't press Half Load,
the dishwasher runs normally,
i.e, operation of upper and
lower spray arm alternating
periodically.
POWER
• For operating, press this
button first for power on.
• After operating, the power
automatically switches off
for safety and economy.
• In case of an unusual Power
surge or disturbance, the
power may be automatically
turned off for safety.
CHILD LOCK
• Lock the control buttons
to prevent the settings
from being changed.
• To lock/unlock, press
Spray and Rinse
buttons simultaneously
for 3 seconds with door
open.
SANITARY/
EXTRA RINSE
• Repeated pressing of the
Rinse button will select
Sanitary, Extra Rinse
or both.
• If you select the Sanitary
function, the temperature
of Heating Rinse can
reach 161 (72 ).
• When you select Extra
Rinse, an additional
rinse cycle is added.
Page: 8
- 10 -
SPRAY
(INTENSITY)
• Repeated pressing of the
Spray button will select
Strong, Medium or
Soft.
CHILD LOCK
• Lock the control buttons
to prevent the settings
from being changed.
• To lock/unlock, press
Spray and Rinse buttons
simultaneously for 3
seconds.
SANITARY/
EXTRA RINSE
• Repeated pressing of the
Rinse button will select
Sanitary, Extra Rinse
or both.
• If you select the Sanitary
function, the temperature
of Heating Rinse can
reach 161 (72 ).
• When you select Extra
Rinse, an additional
rinse cycle is added.
HALF LOAD
• In case of a small load, use the
upper or lower rack only to save
energy.
• Each press of the Half Load
button cycles between upper
rack only and lower rack only.
• If you don't press Half Load,
the dishwasher runs normally,
i.e, operation of upper and
lower spray arm alternating
periodically.
4-2-2. LDF 5811 Series
Page: 9
- 11 -
INDICATOR
• Child lock: Lamp will turn
on when Child Lock
setting is on.
• Rinse Aid: Refill with
Rinse aid when Lamp turns
on.
PROCESSING
INDICATOR
• Current program
phase is indicated.
TIME LEFT
• Before starting, the display window shows
the running time of the selected program.
• After starting, the display window shows
the remaining time.
• If the dishwasher has a trouble, the trouble
type is displayed.
PROGRAM
• Press the
program that
corresponds to
your desired
wash cycle.
CANCEL
• To cancel a
running program,
press and hold
the Normal and
Delicate buttons
for 3 seconds.
DELAY START
• If you want to delay the start of
a selected program, press the
Delay Start button.
• Each press of Delay Start will
delay the start of the cycle by
one hour.
• The delay start time can be
adjusted from 1 to 12 hours in
one-hour increment.
POWER
• For operating, press this
button first for power on.
• After operating, the power
automatically switches off
for safety and economy.
• In case of an unusual Power
surge or disturbance, the
power may be automatically
turned off for safety.
Page: 10
- 12 -
PROGRAM
• Press the program that
corresponds to your
desired wash cycle.
CANCEL
• To cancel a running
program, open the door,
then press and hold the
Power Scrub and
Normal buttons for 3
seconds.
INDICATOR
• Child lock: Lamp will turn on
when Child Lock setting is on.
• Rinse Aid: Refill with Rinse aid
when Lamp turns on.
This program is for very heavily soiled loads
This program is for normally soiled everyday loads.
This program is for washing delicate items like glasses.
This program is for very lightly soiled loads.
This program is to wash some items loaded on the upper rack.
Normal
Rinse Only
Upper Only
Delicate
Power Scrub
Control panel may vary on some models.
4-2-3. LDF 6810 Series
Page: 11
- 13 -
DELAY START
• If you want to delay the start of
a selected program, press the
Delay Start button.
• Each press of Delay Start will
delay the start of the cycle by
one hour.
• The delay start time can be
adjusted from 1 to 12 hours in
one-hour increment.
POWER
• For operating, press this
button first for power on.
• After operating, the power
automatically switches off
for safety and economy.
• In case of an unusual Power
surge or disturbance, the
power may be automatically
turned off for safety.
CHILD LOCK
• Lock the control buttons
to prevent the settings
from being changed.
• To lock/unlock, press
Delicate and Rinse Only
buttons simultaneously
for 3 seconds with door
open.
SANITARY/
EXTRA RINSE
• Repeated pressing of the
Rinse button will select
Sanitary, Extra Rinse
or both.
• If you select the Sanitary
function, the temperature
of Heating Rinse can
reach 161 (72 ).
• When you select Extra
Rinse, an additional
rinse cycle is added.
Page: 12
4-3. TEST MODE
4-3-1. LDF 7811/7810 LDS 5811 Series
CHECK PROGRAM
BUTTON
The number of
pushing button
Front Display
Top
Display
Load and Checking points
Door open/
closed
Rinse + Time Delay +
POWER S/W
Soak
Power Scrub
Normal
Delicate
Quick Wash
Rinse Only
Supply
Rinse
Half Load
Time Delay
Normal Water Level : 315
Pure Water : more than 229
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
2 TIME
3 TIME
4 TIME
5 TIME
6 TIME
7 TIME
8 TIME
9 TIME
10 TIME
11 TIME
12 TIME
13 TIME
31
32
33
34
35
36
37
38
39
3A
3b
3c
n : 3H/U:02
3H/U2
11
22
33
44
55
66
77
88
99
1 : 11
2 : 22
3 : 33
4 : 44
5 : 55
6 : 66
7 : 77
8 : 88
9 : 99
Soil Level
n : 02
n : 03
Frequency
n : 05
n : 06
n : 07
n : 08
Temp. ( )
n : 0A
n : 0b
n : 0c
Soil Sensor
Wash Pump
Drain Pump
Inlet Valve
Dispenser
Heater
(for 10 sec)
Fan
Thermistor
Lower Nozzle
(VARIO)
Upper Nozzle
(VARIO)
Wash-Drain-
Water Supply
Auto-Off
Delay Start
Child Lock +
Rinse Aid
Wash
Rinse
Dry
Wash-Rinse-Dry
Strong-Soft
Sanitary-Extra
Upper-Lower
Soak-Normal
Delicate-Rinse
Only
Rinse Aid
All LEDs are lighting Both
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
Strong/Medium/Soft
Sanitary-Extra Rinse
Upper-Lower
Both
Both
Both
Both
Both
Both
Both
Both
Both
Both
Closed
Closed
Both
Closed
Closed
Closed
Both
Closed
Closed
Closed
Closed
Supply water before operating the Test Mode.
- 14 -
Page: 13
Normal Water Level : 295
- 15 -
4-3-2. LDF 6810 Series
CHECK PROGRAM
BUTTON
The number of
pushing button
Top
Display
Load and Checking points
Door open/
closed
Upper Only +
Time Delay +
POWER
Power Scrub
Normal
Delicate
Rinse Only
Upper Only
Rinse
Time Delay
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
1 TIME
2 TIME
3 TIME
4 TIME
5 TIME
6 TIME
7 TIME
8 TIME
9 TIME
10 TIME
11 TIME
12 TIME
13 TIME
31
32
33
34
35
36
37
38
39
3A
3b
3c
3H/U2
11
22
33
44
55
66
Wash Pump
Drain Pump
Inlet Valve
Dispenser
Heater
(for 10 sec)
Fan
Thermistor
Lower Nozzle
(VARIO)
Upper Nozzle
(VARIO)
Wash-Drain-
Water Supply
Auto-Off
Child Lock + Rinse Aid
Sanitary-Extra
Power Scrub +
Normal + Delicate
Rinse Only +
Upper Only
Rinse Aid
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
All LEDs are lighting
Both
Both
Both
Both
Both
Both
Both
Both
Both
Both
Closed
Both
Closed
Closed
Closed
Closed
Both
Closed
Closed
Closed
Closed
Page: 14
- 16 -
5. PARTS NAME
Control Panel
Front Display
Door Handle
Front Cover
Lower Cover
Leveling Foot
Side Cabinet
Base
Top Spray Arm
Upper Spray Arm
Removable Tines
Lower Spray Arm
Detergent & Rinse Aid Dispenser
Vapor Vent Cover
Upper Rack
Cutlery Basket
Lower Rack
Top Display
Power Button
The appearance and specifications may be varied without notice according to localities.
INSTALL BRACKET WOOD SCREW
5-1. LDF 7811/7810 Series
Page: 15
- 17 -
Control Panel
Front Display
Door Handle
Power Button
Front Cover
Lower Cover
Leveling Foot
Side Cabinet
Base
Top Spray Arm
Upper Spray Arm
Removable Tines
Lower Spray Arm
Detergent & Rinse Aid Dispenser
Vapor Vent Cover
Upper Rack
Cutlery Basket
Lower Rack
The appearance and specifications may be varied without notice according to localities.
INSTALL BRACKET WOOD SCREW
5-2. LDF 5811 Series
Page: 16
- 18 -
Control Panel
Door Handle
Front Cover
Lower Cover
Leveling Foot
Side Cabinet
Base
Top Spray Arm
Upper Spray Arm
Lower Spray Arm
Detergent & Rinse Aid Dispenser
Vapor Vent Cover
Upper Rack
Cutlery Basket
Lower Rack
Top Display
Power Button
The appearance and specifications may be varied without notice according to localities.
INSTALL BRACKET WOOD SCREW
5-3. LDF 6810 Series
Page: 17
- 19 -
6. PROGRAM CHART(SCHEMATIC DIAGRAM)
Drain
A
26
10
10
46
10
10
30
30
49
65
72
18
10
10
38
10
10
26
30
63
68
10
10
10
30
10
20
30
60
65
10
10
6
1
22
10
26
30
49
68
8
6
20
20
46
60
10
30
8
30
3
30
W/Motor
Drain
Pump
Inlet
Valve
Heater
Vario
Motor
Fan
Motor
Dispenser
Thermal
Act
Auto
Off
S/W
Program
chart
Rinse
Dry
Main
Wash
Wash
Rinse
1
Rinse
2
Heating
Rinse
Dry
Program
Wash
Wash
Wash
Rinse
Stop
Stop
Stop
Wash
Wash
Wash
Wash
Wash
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Wash
Drain
Drain
Drain
Drain
Drain
Heating A
Heating B
Dry
Drain
D
Drain
Drain
Drain
Stop
Stop
Drain
Drain
Water Supply
Water Supply
Stop
Drain
C
Drain
Water Supply
Water Supply
Rinse
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
B
Drain
B
Drain
C
Drain
Drain
Drain
Stop
Drain
Drain
Stop
Pre
Wash
1
Pre
Wash
2
Pre
Wash
3
Drain
B
Drain
B
Wash
Wash
Wash
Wash
Drain
Stop
Water Supply
Wash
Power
Scrub
Soak
Rinse
Only
Quick
Delicate
NORMAL
6-1. LDF 7811/7810 LDS 5811 Series
Page: 18
- 20 -
Drain
A
18
10
10
38
10
10
26
30
63
68
10
10
10
30
10
20
30
60
65
10
10
6
1
22
10
26
30
49
68
8
6
20
20
46
60
10
30
8
30
3
30
W/Motor
Drain
Pump
Inlet
Valve
Heater
Vario
Motor
Fan
Motor
Dispenser
Thermal
Act
Auto
Off
S/W
Program
chart
Rinse
Dry
Main
Wash
Wash
Rinse
1
Rinse
2
Heating
Rinse
Dry
Program
Wash
Wash
Wash
Rinse
Stop
Stop
Stop
Wash
Wash
Wash
Wash
Wash
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Water Supply
Wash
Drain
Drain
Drain
Drain
Drain
Heating A
Heating B
Dry
Drain
D
Drain
Drain
Drain
Stop
Stop
Drain
Drain
Water Supply
Water Supply
Stop
Drain
C
Drain
Water Supply
Water Supply
Rinse
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
Drain
B
Drain
B
Drain
C
Drain
Drain
Drain
Stop
Drain
Drain
Stop
Pre
Wash
1
Pre
Wash
2
Pre
Wash
3
Drain
B
Drain
B
Wash
Wash
Wash
Wash
Drain
Stop
Water Supply
Wash
Power
Scrub
Rinse
Only
Quick
Delicate
NORMAL
6-2. LDF 6810 Series
Page: 19
- 21 -
BEFORE DISASSEMBLING THE DISHWASHER ;
1) Remove the cord from electric outlet to avoid electric shock.
2) Close the Water Tap (faucet).
3) Remove all dishes and items in the dishwasher.
4) Remove the Lower Rack and the Upper Rack.
5) Remove the inlet hose and drain hose connetion to avoid the hose damages.
6) Prepare some towels to avoid floor wet by the water left in the dishwasher.
7. HOW TO DISASSEMBLE
7-1. FULL DISASSEMBLE
1. Lower Cover and Lower Felt
1) Remove the front 2 screws.
2) Pull the Felt.
3) Remove the Inlet Hose and Power Supply
Cable.
2. Cabinet and Tub Felt
1) Cabinet-R
Remove front 2 screws.
Remove rear 3 screws.
2) Cabinet-L
Remove front 2 screws.
Remove rear 3 screws.
3) Tub Felt
Lower Felt
Lower Cover
Tub Felt
Cabinet-L
Cabinet-R
Page: 20
- 22 -
Control Panel Front Cover
Controller
Controller
Latch Assembly
Front Display
3-1. Door Assembly
(LDF 6810/7811/7810 Series)
1) Front Cover
Open the door.
Remove 12 screws(stainless).
2) Control Panel Assembly
Remove 2 screws(Stainless).
Remove the wire connections.
Be sure the wiring should not be
changed in reassembling
Remove the Latch assembly.
Remove the Front Display.
Remove 8 screws for Controller.
Page: 21
- 23 -
Control Panel Front Cover
Controller
Controller
Latch Assembly
3-2. Door Assembly
(LDF 5811 Series)
1) Front Cover
Open the door.
Remove 6 screws(Stainless).
2) Control Panel Assembly
Remove 8 screws(Stainless).
Remove the wire connections.
Be sure the wiring should not be
changed in reassembling
Remove the Latch assembly.
Remove 8 screws for Controller.
Page: 22
- 24 -
Fan Assembly
Inner Cover
Gasket
Flange
Detergent
Dispenser
Door Hinge
Air Duct
Door Bracket
Hinge Bracket
Hinge Spring
3) Fan Assembly
Open the door.
Remove 4 screws and a earth screw for
Door Bracket.
Remove the wire connetions.
Remove the Air Duct.
Turn the Inner Cover counterclockwise.
4) Detergent Dispenser
Close the door
Remove the wire connections.
Remove 6 screws with brackets.
Push the Detergent slowly pulling up the
the Flange by Standard Screwdriver.
5) Door Spring (Right & Left)
Push the Spring upwards and take it off
from the Hinge Bracket.
Be careful not to be injured by the
sharpedge of Tub.
Take off the Hinge Link from the Hinge.
6) Door Liner
Open the door.
Pull the Door Liner and take it off from
the Hinge Supporter.
Door Liner Assembly
Hinge Supporter
Page: 23
- 25 -
Lead Wire Holer Hook
Lead Wire Holer
Lower Frame
Drain Hose
Drain Hose
Holder
4. Lower Frame
1) Press the holder hook as shown in figure.
2) Remove 4 screws.
6. Drain Hose Holder
1) Press the holder hook as shown in figure.
2) Pull the Drain Hose and remove the Drain
Hose Holder.
5. Put the Dishwasher upside down.
Page: 24
- 26 -
Base Cover
Cabinet Base
7. Base Cover
1) Remove 2 screws.
2) Pull the Base Cover out.
8. Harness & Hose Assembly
1) Remove the wiring connections.
2) Remove the Hose connections from
Sump Assembly.
You can see the information of Wiring
Diagram at the back of Lower Cover.
Page: 25
- 27 -
Cabinet Base
Inlet Valve
Cabinet Base
Air Braker
Nut
Gasket
Air Braker
Assembly
9. Cabinet Base
1) Remove 8 screws.
2) Lift it upward.
10. Inlet Valve
1) You can disassemble the lnlet Valve by
removing the 2 screws.
11. Air Braker Assembly
1) Disconnect the 3 hoses assembly.
2) Turn the Air Braker Nut counterclockwise.
Be careful the o-ring should not be lost.
Page: 26
- 28 -
Sump Holder
Hook
Sump
Assembly
1) Heater & Drain Motor
Pull the Heater out of the Sump after
releasing the nut.
Remove 3 screws.
2) Vario Motor & Soil Sensor
Remove 2 screws for Vario Motor.
Pull the Vario Motor, Soil Sensor and
Micro S/W.
Drain Pump
Heater
Vario Motor Soil
Sensor
Micro S/W
12. Sump Assembly
Remove 2 screws.
Remove the Sump Holder and push the
Sump Assembly down with pulling aside
Hook.
Be careful not to drop the Sump
Assembly to the bottom.
Page: 27
- 29 -
13. Holder Supporter, Tub Packing
and Hinge Supporter Assembly.
When you reassemble the Sump Assembly,
be careful not to kink, tear and take off the
seals.
You must take off Stopper Roller(F117) by –
screwdriver to change the Rail Assembly.
(Stopper Roller could be broken while you
are taking off. So you should be careful not
to be hurt and have extra stopper rollers
ready at servicing at all times)
Rotate the screwdriver, after slide it into the
gap between Stopper Roller and Rail Roller.
Page: 28
- 30 -
A. TROUBLE SHOOTING ACCORDING TO DISPLAYED ERROR MESSAGE
ERROR MESSAGE POSSIBLE CAUSE REMEDY
FOR ERROR OCCURRENCE
The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.
(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged
by impure water.
The Hall sensor is OK?
The Impeller of Air Guide is bound.
The Drain Hose kinked or blocked.
Wiring connection is OK?
The drain outlet of sump is
blocked.
The Drain Pump/Motor or circuit is
troubled.
Water leakage in Hose connections.
Water is leaked by damages.
The Motor Water Seal leakage of
Sump assembly.
The height of Drain Hose connection
(sink-Drain Hose) is not over 20 .
Impeller of the Washing Pump is
worn away.
Remove the cause of kink or block.
Check the wiring connection.
Measure the electric resistance of
Drain Motor. (20-40 )
Replace the Drain Motor or repair
the Circuit.
Replace the connections of Hose.
Check the point of damages and
repair or replace the related parts.
Read the Installation Instructions
(page 9) and fix it to the
recommended Height.
Replace the Impeller of the
Washing Pump.
Take action on Water Supply
device.
Measure the electric resistance of
Inlet Valve. (950-1300 )
Clean the filter of Inlet Valve.
Check the frequency of Inlet Water
by the Test Mode.
Replace the Air Braker.
Not reached to the nor-
mal water level in spite
of 10 min. water supply
INLET ERROR
displayed
Condition
Not fully drained out in
spite of 5 min. drain
operation
The excessive RPM of
Washing Motor
happened during Wash
cycle due to water
leakage.
DRAIN ERROR
displayed
Condition
LEAKAGE ERROR
displayed
Condition
8.TROUBLE SHOOTING METHODS
Page: 29
- 31 -
ERROR MESSAGE POSSIBLE CAUSE REMEDY
FOR ERROR OCCURRENCE
The Inlet Valve is troubled.
The Controller is troubled.
The Inlet Water Temperature is
very high. (over 194 )
Wiring connection is OK?
The Thermistor is OK?
Wiring connection is OK?
The Impeller of Washing Pump is
locked.
The rotor of Washing Motor is
locked.
The Blade is locked.
Check the temperature. (Test Mode)
If the temperature is displayed,
adjust the Inlet Water
Temperature to 120 .
If the temperature is not
displayed,
check the wiring connection.
check the electric resistance
of Thermistor.
(11~14k at 77 )
Replace the PCB.
Replace the Inlet Valve.
Repair or replace the Controller.
Excessive water is sup-
plied than normal water
level.(Automatically drain
Pump operated.)
EXCESS ERROR
displayed
Condition
The resistance of ther-
mistor not normally out put.
THERMAL ERROR
displayed
Condition
Check the wiring connection.
Replace the cause of restriction.
Replace the Washing Motor.
Replace the PCB.
The Motor is working
abnormally.
MOTOR ERROR
displayed
Condition
Page: 30
- 32 -
No Power on when the power button pressed.
The Power connection
is correctly connected.
The Fuse or
Circuit Breaker
of house is O.K?
The Power Switch or
the Circuit is O.K?
• Re-connect the Powr connection.
• Check the electricity is failed or not.
• Replace the Fuse or Circuit Breaker of house.
• Check the Power Switch or the circuit and repair it.
Check the Controller.(Power Circuit)
B. TROUBLE DIAGNOSES AND REPAIR BY SYMPTOM
NO
NO
YES
YES
YES
NO
Page: 31
- 33 -
The Wash Pump/Motor does not run.
The Door is tightly
closed?
The Wiring connections
is OK?
The Blade is not locked
by a small and sharp
object?
• close the Door tightly.
• Check the Door Switch in Latch Handle.
• Re-connect the wiring connections related to the
Washing Motor.
• Remove the cause of lock or replace the Blade.
Replace the Wahing Pump/Motor
NO
NO
NO
YES
YES
YES
Page: 32
- 34 -
Washing Results are not Satisfactory
After washing, are there still
White deposits or streaks on
the dishes?
NO
After washing, are there still
food soils on the dishes?
YES
Check that : - the amount of detergent Correctly used or not
- Filters clogged or not.
- the holes of spray arms blocked or not.
- Utensils are correctly arranged or not.
- Utensils are overloaded or not.
- the spray arm rotating is obstructed or not.
- the program is correctly selected or not.
Reduce the amount of Rinse-Aid
(for Streak)
YES
Dry Results are not satisfactory
Increase the amount of Rinse-Aid.(Set the number higher)
Select the Program that the Rinse temperature is higher.
Page: 33
- 35 -
Power Button not automatically off after operation.
Check the button is blocked by foreign materials.
Check the Power Switch.(Replace it, if necessary.)
Check the Controller.(Replace it, if necessary.)
Page: 34
- 36 -
9. INSTALLATION INSTRUCTION
Step 1: PREPARE CUPBOARD OPENING
1. This dishwasher is designed to fit a standard dishwasher opening as shown below.
2. Select a location as close to sink as possible for easy connections to water and drain lines.
3. The dishwasher should not be installed more than 10 ft. (3m) from the sink for proper
drainage.
4. If dishwasher is to be installed in a corner, a minimum of 2 in. (50mm) is required between
the dishwasher and an adjacent a wall.
Ensure the floor under the dishwasher is at the same level as the rest of the room to
allow for any service requirements.
If dishwasher will sit directly on
subflooring, subfloor should be
sealed with a waterproof paint or
sealer to prevent damage from
steam.
Drill a 1-1/2 (38mm) dia hole or cut
out for drain hose, inlet hose and
electrical cables on either side.
approx. 4 (100mm, W) X 4 (100mm, H)
These openings must be within 4
(100mm) from the floor and 1-5/8
(40mm) from the back wall. If there is
a floor in the cabinet under the sink,
it will also be necessary to drill or cut
through the floor to connect the
water and drain under the sink.
Page: 35
- 37 -
WARNING!
For personal safety, remove house fuse or open circuit breaker before
installation. Do not use an extension cord or adapter plug with this dishwasher.
Electrical and grounding connections must comply with the national electrical
code/provincial and municipal code and/or other local codes.
Figure A
Step 2: PREPARE THE ELECTRICAL WIRING
1. This appliance must be operated with correct voltage as shown in this manual and on the
rating plate, and connected to an individual, properly grounded branch circuit, protected
by time delay fuse. Wiring must be 3 wires including ground.
2. The wiring or cord should be in an accessible location adjacent to, and not behind the
dishwasher and within 4 ft. (1.2m) of the dishwasher side.
3. The wiring or cord must be grounded properly, if in doubt, have it checked by a qualified
electrician. No other appliance shall be connected to the same outlet by a double adapter
or similar plug.
4. The wiring or cord must be oriented as shown in Figure A below.
5. Check the dishwasher for any damage before trying to install it.
6. Make sure water line and Electrical line are oriented in the bottom channels as shown in
the figure below.
If you find any damage to the dishwasher, Please contact your dealer or builder
immediately.
Page: 36
- 38 -
Step 3: PREPARE THE WATER SUPPLY CONNECTION
1. This dishwasher may be connected to either hot or cold water. If the water can not be
maintained below 149 (65 ), the dishwasher must be connected to cold water.
2. When connecting the dishwasher water line, sealing tape or compound should be used to
avoid leaks.
3. When connecting the dishwasher water line, the house supply should be shut off.
4. The Water Supply Tube must be oriented as shown in Figure A on page 6.
Step 4: PREPARE DISHWASHER FOR INSTALLATION
1. Adjust the legs to the required height to fit properly under the countertop as shown below.
2. Check the level of dishwasher by using level.
Page: 37
- 39 -
1. Remove the Lower Cover and orient dishwasher as shown below.
2. Before sliding the dishwasher into the cupboard opening, make all necessary height
adjustments using the legs.
3. Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose
inside the cabinet is not kinked.
4. Follow the instruction as in Figure B.
Step 5: INSTALL THE DISHWASHER IN CUPBOARD
Page: 38
- 40 -
Step 6: DRAIN LINE CONNECTION
1. If the end of the drain hose does not fit to the drain line, use an adapter (not supplied) that
must be resistant to heat and detergent and may be obtained from a plumbing shop.
2. There are 2 typical connections as shown in Figures C & D.
There may be other options than shown here for connection the drain hose. The drain
connection must meet local plumbing regulations.
The S trap spigot must be drilled out cleanly and free of obstruction to its maximum
internal diameter, if used for drainage.
To prevent syphoning, one of the following instruction methods must be followed:
Follow local codes and ordinances.
Do not exceed 10 ft. (3m) distance
to drain.
Do not connect drain lines from
other devices to the dishwasher
drain hose.
Drain Requirements
Figure C: Connection to Disposer or waste Tee.
Figure D: Connection to Air Gap.
Page: 39
- 41 -
Step 7: WATER SUPPLY CONNECTION
1. When connecting, sealing tape or
sealing compound should be
used to avoid water leaks.
2. Before connecting, turn off the water
supply.
3. After fitting the Elbow into the
Inlet Valve, slide the Flexible
Stainless Tube or Copper Tube
into the Elbow.
4. Tighten the nut and make sure
that the line is not kinked or
sharply bent.
Inlet Valve
Water Supply Tube
Elbow
1. Before beginning, turn off electrical
power to the unit at the circuit breaker.
2. Remove the Junction Cover and then
Install the Strain Relief.
3. Twist Wire Connectors tightly on the
wires. Wrap each connection with
Electrical tape.
4. Check again and make sure that all
wires are connected correctly, black to
black, white to white, green to green
(ground to ground).
5. Replace the Junction Cover.
Junction Cover
Wire Connector
Junction Case
Strain Relief
black to black
(ground to ground)
green to green
white to white
Step 8: ELECTRICAL POWER CONNECTION
Page: 40
- 42 -
Step 9: FINAL CHECKS
1. Turn electrical power back on at the circuit breaker.
2. Turn house water supply back on.
3. Operate the dishwasher through one cycle (Quick cycle is recommended) to check for
water leaks and operating conditions.
4. Replace the Lower Cover.
Page: 51
- 53 -
- 53 -
E010 BUSHING 4830ED4001A 2
F001 FRAME ASSEMBLY 3211DD1001A 1
F004 NOZZLE ASSEMBLY 5249DD2001A TOP NOZZLE 1
F005 SHAFT NOZZLE 4370ED3006A TOP NOZZLE 1
F011 SPRING, HINGE 4970ED4004A 2
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F014 HINGE, BRACKET 4810ED4004A 2
F022 SENSOR ASSEMBLY 6501DD2001A 1
F040 GUIDE ASSEMBLY 4975DD1001A 1
F041 HOSE, INLET 5214DD3001A 1
F042 HOSE, CONNECTOR 5214DD3003A 1
F043 HOSE, CONNECTOR 5214DD3002A 1
F045 COVER, PROTECT 3550DD2001A 1
F050 NUT, DRAWING 4020FD3641C 1
F060 GASKET 4986DD3001A 1
F101 PACKING 3920DD3002A 1
F110 RAIL ASSEMBLY 5219DD2002A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
F117 STOPPER, ROLLER 4620ED3001A 2
F132 PACKING 3920DD3005A TUB PACKING 1
F143 HINGE ASSEMBLY 4775ED3004A 1
F144 HINGE ASSEMBLY 4775ED3003A 1
F171 LATCH, LOCK 4026DD3001A 1
F174 BRACKET, HINGE 4810DD1001A DOOR FRAME 1
F191 GUIDE, WATER 4974DD2003A 1
F192 GUIDE, NOZZLE 4974DD3001A 1
F210 RAIL ASSEMBLY 5219DD2001A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
K001 DISPENSER 4924FD2123E 1
K002 BRACKET ASSEMBLY 4810FD3805A 2
3650ED2006A 1
K005 HANDLE 3650ED2006B 1
3650ED2006C 1
3806ED3008A 2
K006 DECO, HANDLE 3806ED3008B 2
3806ED3008C 2
3550ED0001A 1
K010 COVER FRONT 3550ED0001B 1
3550ED0001C 1
3551DD1003A 1
K030 COVER ASSEMBLY, FRONT 3551DD1003B 1
3551DD1003C 1
K100 DOOR LINER ASM 4937DD9001A DOOR LINER + DAMPING SHEET + GASKET 1
K110 BLOWER ASSEMBLY 5835ED2002A 1
K121 GASKET 4986DD3003A BLOWER GASKET 1
K122 COVER, BLOWER 3550ED3011A 1
K124 VENT 5232ED2001A 1
K141 DOOR HINGE ASSEMBLY 4775DD2001A 1
K142 DOOR HINGE ASSEMBLY 4775DD2002A 1
5020ED3008C 6
K201 BUTTON, CONTROL 5020ED3008D PROGRAM BUTTON 6
5020ED3008E 6
3790ED3007A 1
K203 WINDOW
3790ED3007D
TOP WINDOW
1
PART NAME PART No. SPEC&COLOR Q'ty
No.
WB
BB
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
WB
BB
Page: 52
- 54 -
- 54 -
K203 WINDOW 3790ED3007E 1
K207 COVER, GUIDE 3550ED3012A 1
3720ED1005A 1
K208 PANEL, CONTROL 3720ED1005B 1
3720ED1005C 1
5020ED3011A 1
K209 BUTTON, POWER SWITCH 5020ED3011B 1
5020ED3011A 1
K215 COVER, GUIDE 3550ED1009A 1
5020ED3012C 4
K216 BUTTON, CONTROL 5020ED3012D OPTION BUTTON 4
3791DD3001E 1
3846ER1001A 1
K220 MARK, PET 3846ER1001B 1
3846ER1001A 1
3791DD3001A 1
K230 WINDOW 3791DD3001B FRONT WINDOW 1
3791DD3001B 1
K251 PWB(PCB) ASSEMBLY, MAIN 6871DD1006A 1
K252 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2001A 1
K253 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2002A 1
K254 DISPLAY LED ASSEMBLY 6327DC3001A 1
K260 LATCH, ASSEMBLY 4027ED3002A 1
M001 HOLDER 4930DD3002A 1
M005 GASKET 4986DD3002A SUMP GASKET 1
M006 SUMP, ASSEMBLY 3485ED1002A 1
M007 SUMP 3485DD1001A SUMP+SEAL+GREASE 1
M025 VALVE, CHECK 5220DD3001A 1
M026 MOTOR ASSEMBLY, WM 4681ED3001B VARIO MOTOR 1
M027 SWITCH, MICRO 3W40025C 1
M028 CAM, SWITCH 4430ED3001A 1
M031 PACKING 3920ED4009B VARIO PACKING 1
M034 BLADE 5832DD4001A 1
M035 SEAL 4036DD3001A 1
M036 HOLDER 4930DD3008A 1
M037 FILTER ASSEMBLY, MESH 5231DD1001A 1
M038 HOLDER 4930DD3012A 1
M050 MOTOR ASSEMBLY, PUMP 4681EA2002D DRAIN MOTOR 1
M060 MOTOR ASSEMBLY, WM 4681ED1004A 1
M081 HEATER ASSEMBLY 5301DD1001A 1
M086 MICRO S/W 3W40025P 2
M087 SENSOR ASSEMBLY 6501ED2002D SOIL SENSOR 1
M088 PROTECTOR (MECH) 3740ED3003A 1
M090 FLOAT ASSEMBLY 4769DD2001A 1
M110 FILTER ASSEMBLY, MESH 5231ED1001A 1
M120 CASE ASSEMBLY 3111DD1001A 1
M130 IMPELLER ASSEMBLY 5911ED3003A 1
M210 VALVE ASSEMBLY, INLET 5221DD1001A 1
M220 VALVE, CHECK 5220ED4004A 1
M260 BASE, CABINET 3040ED1003A 1
M261 COVER ASSEMBLY, BASE 3551DD1002A 1
M262 CASE 3110DD3002A 1
M270 LEG 4778ED3001A 1
PART NAME PART No. SPEC&COLOR Q'ty
No.
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
BB
WB
ST
Page: 54
- 56 -
- 56 -
F001 FRAME ASSEMBLY 3211DD1001A 1
F004 NOZZLE ASSEMBLY 5249DD2001A TOP NOZZLE 1
F005 SHAFT NOZZLE 4370ED3006A TOP NOZZLE 1
F011 SPRING, HINGE 4970ED4004A 2
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F014 HINGE, BRACKET 4810ED4004A 2
F022 SENSOR ASSEMBLY 6510DD2001A 1
F040 GUIDE ASSEMBLY 4975DD1001A 1
F041 HOSE, INLET 5214DD3001A 1
F042 HOSE, CONNECTOR 5214DD3003A 1
F043 HOSE, CONNECTOR 5214DD3002A 1
F045 COVER, PROTECT 3550DD2001A 1
F050 NUT, DRAWING 4020FD3641C 1
F060 GASKET 4986DD3001A 1
F101 PACKING 3920DD3002A 1
F110 RAIL ASSEMBLY 5219DD2002A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
F117 STOPPER, ROLLER 4620ED3001A 2
F132 PACKING 3920DD3005A TUB PACKING 1
F143 HINGE ASSEMBLY 4775ED3004A 1
F144 HINGE ASSEMBLY 4775ED3003A 1
F171 LATCH, LOCK 4026DD3001A 1
F174 BRACKET, HINGE 4810DD1001A DOOR FRAME 1
F191 GUIDE, WATER 4974DD2003A 1
F192 GUIDE, NOZZLE 4974DD3001A 1
F210 RAIL ASSEMBLY 5219DD2001A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
K001 DISPENSER 4924FD2123E 1
K002 BRACKET ASSEMBLY 4810FD3805A 2
3551DD1004A 1
K010 COVER ASSEMBLY, FRONT 3551DD1004B 1
3551DD1004D 1
K100 DOOR LINER ASM 4937DD9001A DOOR LINER + DAMPING SHEET + GASKET 1
K110 BLOWER ASSEMBLY 5835ED2002A 1
K121 GASKET 4986DD3003A BLOWER GASKET 1
K122 COVER, BLOWER 3550ED3011A 1
K124 VENT 5232ED2001A 1
K141 DOOR HINGE ASSEMBLY 4775DD2001A 1
K142 DOOR HINGE ASSEMBLY 4775DD2002A 1
5020DD2001A 1
K201 BUTTON, CONTROL 5020DD2001B PROGRAM BUTTON 1
5020DD2001C 1
3790DD3001A 1
K203 WINDOW 3790DD3001B PROGRESS WINDOW 1
3790DD3001B 1
3720DD1001A 1
K208 PANEL, CONTROL 3720DD1001B 1
3720DD1001C 1
5020DD2004A 1
K209 BUTTON, POWER SWITCH 5020DD2004B 1
5020DD2004C 1
PART NAME PART No. SPEC&COLOR Q'ty
No.
BB
WB
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST
Page: 55
- 57 -
- 57 -
K212 BUTTON, CONTROL 5020DD3001A DELAY START 1
5020DD2003A 1
5020DD2003B 1
K216 BUTTON, CONTROL
5020DD2003C
OPTION BUTTON
1
5020DD2002A 1
K217 BUTTON, CONTROL 5020DD2002B PROGRAM BUTTON 1
5020DD2002C 1
3846ER1001A 1
K220 MARK, PET 3846ER1001B 1
3846ER1001A 1
K230 WINDOW 3790DD3002A OPTION WINDOW 1
K251 PWB(PCB) ASSEMBLY, MAIN 6871DD1006B 1
K252 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2003A 1
K260 LATCH, ASSEMBLY 4027ED3002A 1
3650DD2005A 1
K262 HANDLE 3650DD2005B 1
3650DD2005C 1
M001 HOLDER 4930DD3002A 1
M005 GASKET 4986DD3002A SUMP GASKET 1
M006 SUMP, ASSEMBLY 3485ED1002A 1
M007 SUMP 3485DD1001A SUMP+SEAL+GREASE 1
M025 VALVE, CHECK 5220DD3001A 1
M026 MOTOR ASSEMBLY, WM 4681ED3001B VARIO MOTOR 1
M027 SWITCH, MICRO 3W40025C 1
M028 CAM, SWITCH 4430ED3001A 1
M031 PACKING 3920ED4009B VARIO PACKING 1
M034 BLADE 5832DD4001A 1
M035 SEAL 4036DD3001A 1
M036 HOLDER 4930DD3008A 1
M037 FILTER ASSEMBLY, MESH 5231DD1001A 1
M038 HOLDER 4930DD3012A 1
M050 MOTOR ASSEMBLY, PUMP 4681EA2002D DRAIN MOTOR 1
M060 MOTOR ASSEMBLY, WM 4681ED1004A 1
M081 HEATER ASSEMBLY 5301DD1001A 1
M086 MICRO S/W 3W40025P 1
M087 SENSOR ASSEMBLY 6501ED2002D SOIL SENSOR 1
M088 PROTECTOR (MECH) 3740ED3003A 1
M090 FLOAT ASSEMBLY 4769DD2001A 1
M110 FILTER ASSEMBLY, MESH 5231ED1001A 1
M120 CASE ASSEMBLY 3111DD1001A 1
M130 IMPELLER ASSEMBLY 5911ED3003A 1
M210 VALVE ASSEMBLY, INLET 5221DD1001A 1
M220 VALVE, CHECK 5220ED4004A 1
M260 BASE, CABINET 3040ED1003A 1
M261 COVER ASSEMBLY, BASE 3551DD1002A 1
M262 CASE 3110DD3002A 1
M270 LEG 4778ED3001A 1
PART NAME PART No. SPEC&COLOR Q'ty
No.
WB
ST
BB
ST
WB
BB
ST
WB
BB
ST
BB
WB
Page: 56
- 58 -
- 58 -
*001 MANUAL ASSEMBLY, OWNER’S 3829DD3002B 1
*002 BOX, CARTON 3890DZ3015A 1
*003 MANUAL, SERVICE 3828ED3001X 1
*005 ACCESSORY ASSEMBLY 5001DD4001A 1
A003 FELT 4766DD2004A LOWER FELT 1
A005 BRACKET, TOP 4810DD4002B 4
A006 SUPPORTER, HOLDER 4980ED2015A 1
A007 SUPPORTER, HOLDER 4980ED2014A 1
A008 SUPPORTER, HOLDER 4980ED2018A 1
3090ED1001A 1
A010 CABINET 3090ED1001B 1
3090ED1001C 1
3090ED1002A 1
A020 CABINET 3090ED1002B 1
3090ED1002C 1
3551DD2001A 1
A040 COVER ASSEMBLY, LOWER 3551DD2001B 1
3551DD2001C 1
A050 NOZZLE ASSEMBLY 5249DD1002A LOWER NOZZLE 1
A060 NOZZLE ASSEMBLY 5249DD1001A UPPER NOZZLE 1
A070 GUIDE ASSEMBLY 4974DD9001A 1
A073 WASHER, DRAWING 1WZZDD3001A 1
A074 SHAFT, NOZZLE 4370ED3007A 1
A080 RACK 3750DD2001A CUP RACK 2
A101 DECO HANDLE 3806DD3004A STS 1
A102 HANDLE FRONT 3650DD3001A FRONT 1
A103 HANDLE REAR 3650DD3002A REAR 1
A110 BASKET ASSEMBLY, SPOON 5005DD1001A 1
A120 HARNESS, PWB 6877DD1002A 1
A130 HOSE ASSEMBLY, DRAIN 5215ED3001E 1
A140 RACK ASSEMBLY 3751DD1001A LOWER RACK 1
A141 RACK 3750ED1004A 1
A142 ROLLER ASSEMBLY 4581DD9002B 8
A144 RACK 3750DD2003A 2
A147 HOLDER 4930DD3006A 3
A148 RACK 3750DD1001A 1
A149 RACK 3750DD1002A 1
A150 RACK ASSEMBLY 3751DD1002A UPPER RACK 1
A151 RACK 3750ED1005A 1
A155 GUIDE ASSEMBLY 4975ED2005A RIGHT 1
A156 GUIDE ASSEMBLY 4975ED2004A LEFT 1
A157 HOLDER 4930DD3003A 4
A158 HOLDER 4930DD3005A 3
A159 RACK 3750DD2002A 2
A160 FILTER ASSEMBLY (CIRC) 6201EC1006A 1
DESC PART No. COMMENTS QTY
LOC
LG MODEL: LD-6105WB/BB/TB
YOUR MODEL: LDF7810WW/BB/ST
Run_Date : 2005-01-30
SPECIFICATION: 120V 60Hz
CAUTION : BEFORE REPLACING ANY OFTHESE COMPONENTS.
READ CAREFULLY THE SAFETY PRECAUTIONS IN THIS MANUAL
NOTE : S(SAFETY PARTS), AL(ALTERNATIVE PARTS)
BB
WB
WB
WB
ST
BB
ST
BB
ST
Page: 57
- 59 -
- 59 -
E010 BUSHING 4830ED4001A 2
F001 FRAME ASSEMBLY 3211DD1001A 1
F004 NOZZLE ASSEMBLY 5249DD2001A TOP NOZZLE 1
F005 SHAFT NOZZLE 4370ED3006A TOP NOZZLE 1
F011 SPRING, HINGE 4970ED4004A 2
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F014 HINGE, BRACKET 4810ED4004A 2
F022 SENSOR ASSEMBLY 6501DD2001A 1
F040 GUIDE ASSEMBLY 4975DD1001A 1
F041 HOSE, INLET 5214DD3001A 1
F042 HOSE, CONNECTOR 5214DD3003A 1
F043 HOSE, CONNECTOR 5214DD3002A 1
F045 COVER, PROTECT 3550DD2001A 1
F050 NUT, DRAWING 4020FD3641C 1
F060 GASKET 4986DD3001A 1
F101 PACKING 3920DD3002A 1
F110 RAIL ASSEMBLY 5219DD2002A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F117 STOPPER, ROLLER 4620ED3001A 2
F132 PACKING 3920DD3005A TUB PACKING 1
F143 HINGE ASSEMBLY 4775ED3004A 1
F144 HINGE ASSEMBLY 4775ED3003A 1
F171 LATCH, LOCK 4026DD3001A 1
F174 BRACKET, HINGE 4810DD1001A DOOR FRAME 1
F191 GUIDE, WATER 4974DD2003A 1
F192 GUIDE, NOZZLE 4974DD3001A 1
F210 RAIL ASSEMBLY 5219DD2001A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
K001 DISPENSER 4924FD2123E 1
K002 BRACKET ASSEMBLY 4810FD3805A 2
3650ED2006A/D 1
K005 HANDLE 3650ED2006B 1
3650ED2006C 1
3806ED3008A 1
K006 DECO, HANDLE 3806ED3008B 2
3806ED3008C 2
3550ED0001E 1
K010 COVER FRONT 3551ED0001F 1
3550ED0001G 1
3551DD1001E/H 1
K030 COVER ASSEMBLY, FRONT 3551DD1003F 1
3551DD1003G 1
K100 DOOR LINER ASM 4937DD9001A DOOR LINER + DAMPING SHEET + GASKET 1
K110 BLOWER ASSEMBLY 5835ED2002A 1
K121 GASKET 4986DD3003A BLOWER GASKET 1
K122 COVER, BLOWER 3550ED3011A 1
K124 VENT 5232ED2001A 1
K141 DOOR HINGE ASSEMBLY 4775DD2001A 1
K142 DOOR HINGE ASSEMBLY 4775DD2002A 1
5028ED3008C 1
K201 BUTTON, CONTROL 5020ED3008D PROGRAM BUTTON 6
5020ED3008E 6
PART NAME PART No. SPEC&COLOR Q'ty
No.
BB
WB
WB
WB
WB
BB
ST
BB
ST
WB
BB
ST
BB
ST
ST
Page: 58
- 60 -
- 60 -
3790ED3007D 1
K203 WINDOW 3790ED3007D TOP WINDOW 1
3790ED3007E 1
K207 COVER, GUIDE 3550ED3012A 1
3720ED1005A 1
K208 PANEL, CONTROL 3720ED1005B 1
3720ED1005C 1
5020ED3011A 1
K209 BUTTON, POWER SWITCH 5020ED3011B 1
5020ED3011A 1
K215 COVER, GUIDE 3550ED1009A 1
5020ED3012C 1
K216 BUTTON, CONTROL 5020ED3012D OPTION BUTTON 4
5020ED3012E 4
3846ER1001A 1
K220 MARK, PET 3846ER1001B 1
3846ER1001A 1
K251 PWB(PCB) ASSEMBLY, MAIN 6871DD1006A 1
K252 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2001A 1
K253 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2002A 1
K260 LATCH, ASSEMBLY 4027ED3002A 1
M001 HOLDER 4930DD3002A 1
M005 GASKET 4986DD3002A SUMP GASKET 1
M006 SUMP, ASSEMBLY 3485ED1002A 1
M007 SUMP 3485DD1001A SUMP+SEAL+GREASE 1
M025 VALVE, CHECK 5220DD3001A 1
M026 MOTOR ASSEMBLY, WM 4681ED3001B VARIO MOTOR 1
M027 SWITCH, MICRO 3W40025C 1
M028 CAM, SWITCH 4430ED3001A 1
M031 PACKING 3920ED4009B VARIO PACKING 1
M034 BLADE 5832DD4001A 1
M035 SEAL 4036DD3001A 1
M036 HOLDER 4930DD3008A 1
M037 FILTER ASSEMBLY, MESH 5231DD1001A 1
M038 HOLDER 4930DD3012A 1
M050 MOTOR ASSEMBLY, PUMP 4681EA2002D DRAIN MOTOR 1
M060 MOTOR ASSEMBLY, WM 4681ED1004A 1
M081 HEATER ASSEMBLY 5301DD1001A 1
M086 MICRO S/W 3W40025P 1
M087 SENSOR ASSEMBLY 6501ED2002D SOIL SENSOR 1
M088 PROTECTOR (MECH) 3740ED3003A 1
M090 FLOAT ASSEMBLY 4769DD2001A 1
M110 FILTER ASSEMBLY, MESH 5231ED1001A 1
M120 CASE ASSEMBLY 3111DD1001A 1
M130 IMPELLER ASSEMBLY 5911ED3003A 1
M210 VALVE ASSEMBLY, INLET 5221DD1001A 1
M220 VALVE, CHECK 5220ED4004A 1
M260 BASE, CABINET 3040ED1003A 1
M261 COVER ASSEMBLY, BASE 3551DD1002A 1
M262 CASE 3110DD3002A 1
M270 LEG 4778ED3001A 1
PART NAME PART No. SPEC&COLOR Q'ty
No.
BB
ST
BB
WB
WB
WB
WB
WB
ST
BB
ST
BB
ST
BB
ST
Page: 60
- 62 -
F011 SPRING, HINGE 4970ED4004A 2
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F014 HINGE, BRACKET 4810ED4004A 2
F022 SENSOR ASSEMBLY 6501DD2001A 1
F040 GUIDE ASSEMBLY 4975DD1001A 1
F041 HOSE, INLET 5214DD3001A 1
F042 HOSE, CONNECTOR 5214DD3003A 1
F043 HOSE, CONNECTOR 5214DD3002A 1
F045 COVER, PROTECT 3550DD2001A 1
F050 NUT, DRAWING 4020FD3641C 1
F060 GASKET 4986DD3001A 1
F101 PACKING 3920DD3002A 1
F110 RAIL ASSEMBLY 5219DD2002A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
F013 CONNECTOR ASSEMBLY 4933DD3001A 2
F117 STOPPER, ROLLER 4620ED3001A 2
F132 PACKING 3920DD3005A TUB PACKING 1
F143 HINGE ASSEMBLY 4775ED3004A 1
F144 HINGE ASSEMBLY 4775ED3003A 1
F171 LATCH, LOCK 4026DD3001A 1
F174 BRACKET, HINGE 3751DD1006A DOOR FRAME 1
F191 GUIDE, WATER 4974DD2003A 1
F192 GUIDE, NOZZLE 4974DD3001A 1
F210 RAIL ASSEMBLY 5219DD2001A MUST CHANGE F117 TOGETHER(REF 24P-13) 1
K001 DISPENSER 4924FD2123E 1
K002 BRACKET ASSEMBLY 4810FD3805A 2
3650ED2006A 1
K005 HANDLE 3650ED2006B 1
3650ED2006C 1
3806ED3008A 2
K006 DECO, HANDLE 3806ED3008B 2
3806ED3008C 2
3550ED0001E 1
K010 COVER FRONT 3550ED0001F 1
3550ED0001G 1
3551DD1003H 1
K030 COVER ASSEMBLY, FRONT 3551DD1003F 1
3551DD1003G 1
K100 DOOR LINER ASM 4937DD9001A DOOR LINER + DAMPING SHEET + GASKET 1
K110 BLOWER ASSEMBLY 5835ED2002A 1
K121 GASKET 4986DD3003A BLOWER GASKET 1
K122 COVER, BLOWER 3550ED3011A 1
K124 VENT 5232ED2001A 1
K141 DOOR HINGE ASSEMBLY 4775DD2001A 1
K142 DOOR HINGE ASSEMBLY 4775DD2002A 1
5020ED3008C 5
K201 BUTTON, CONTROL 5020ED3008D PROGRAM BUTTON 5
5020ED3008R 5
3790ED3007Q 1
K203 WINDOW
3790ED3007R
TOP WINDOW
1
PART NAME PART No. SPEC&COLOR Q'ty
No.
WB
ST
WB
BB
ST
BB
WB
ST
WB
BB
ST
WB
BB
ST
WB
BB
BB
Page: 61
- 63 -
K203 WINDOW 3790ED3007P 1
K207 COVER, GUIDE 3550ED3012B 1
3720ED1005E 1
K208 PANEL, CONTROL 3720ED1005F 1
3720ED1005D 1
5020ED3011A 1
K209 BUTTON, POWER SWITCH 5020ED3011B 1
5020ED3011A 1
K215 COVER, GUIDE 3550ED1009B 1
5020ED3012C 2
5020ED3012D 2
K216 BUTTON, CONTROL
5020ED3012E
OPTION BUTTON
2
3846ER1001A 1
K220 MARK, PET 3846ER1001B 1
3846ER1001A 1
K251 PWB(PCB) ASSEMBLY, MAIN 6871DD1006A 1
K252 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2001A 1
K253 PWB(PCB) ASSEMBLY, DISPLAY 6871DD2002A 1
K260 LATCH, ASSEMBLY 4027ED3002A 1
M001 HOLDER 4930DD3002A 1
M005 GASKET 4986DD3002A SUMP GASKET 1
M006 SUMP, ASSEMBLY 3485ED1002B 1
M007 SUMP 3485DD1001A SUMP+SEAL+GREASE 1
M025 VALVE, CHECK 5220DD3001A 1
M026 MOTOR ASSEMBLY, WM 4681ED3001B VARIO MOTOR 1
M027 SWITCH, MICRO 3W40025C 1
M028 CAM, SWITCH 4430ED3001A 1
M031 PACKING 3920ED4009B VARIO PACKING 1
M034 BLADE 5832DD4001A 1
M035 SEAL 4036DD3001A 1
M036 HOLDER 4930DD3008A 1
M037 FILTER ASSEMBLY, MESH 5231DD1001A 1
M038 HOLDER 4930DD3012A 1
M050 MOTOR ASSEMBLY, PUMP 4681EA2002D DRAIN MOTOR 1
M060 MOTOR ASSEMBLY, WM 4681ED1004A 1
M081 HEATER ASSEMBLY 5301DD1001A 1
M086 MICRO S/W 3W40025P 1
M087 SENSOR ASSEMBLY 6501ED2002E SOIL SENSOR 1
M088 PROTECTOR (MECH) 3740ED3003A 1
M090 FLOAT ASSEMBLY 4769DD2001A 1
M110 FILTER ASSEMBLY, MESH 5231ED1001A 1
M120 CASE ASSEMBLY 3111DD1001A 1
M130 IMPELLER ASSEMBLY 5911ED3003A 1
M210 VALVE ASSEMBLY, INLET 5221DD1001A 1
M220 VALVE, CHECK 5220ED4004A 1
M260 BASE, CABINET 3040ED1003A 1
M261 COVER ASSEMBLY, BASE 3551DD1002A 1
M262 CASE 3110DD3002A 1
M270 LEG 4778ED3001A 1
PART NAME PART No. SPEC&COLOR Q'ty
No.
WB
BB
ST
ST
WB
BB
ST
WB
BB
ST
WB
BB
ST

Question & answers

There are no questions about the LG LDF7811BB yet.

Ask a question about the LG LDF7811BB

Have a question about the LG LDF7811BB but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the LG LDF7811BB . Please make sure that you describe your difficulty with the LG LDF7811BB as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.