LG LAC-M7600R manual

View a manual of the LG LAC-M7600R below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: LG
  • Product: Car Radio
  • Model/name: LAC-M7600R
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
CAR CD/MP3/WMA Receiver
OWNER’S MANUAL
MODEL : LAC-M7600R
Please read this instruction booklet carefully and completely
before connecting, operating or adjusting this product.
ENGLISH
Page: 1
Safety note
2
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT
COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user about the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
Do not use for many hours at extremely low or high temperature.
(-10~60°C)
To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
Due to high temperature outside of the unit, please use the unit only
installed in a car.
CAUTION : VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED.
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. Should the unit require maintenance, contact an
authorized service center.
Performing controls, adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
Page: 2
Safety note / Table of contents
3
8 cm
• A defective or soiled disc inserted into unit can cause sound to drop out
during playback.
• Handle the disc by holding its inner and outer edges.
• Do not touch the surface of the unlabeled side of the disc.
Do not stick paper or tape etc. on the surface.
Do not expose the disc to direct sunlight or excessive heat.
This unit cannot be operated by 8cm disc (using 12cm disc only).
• Clean the disc before playback. Wipe the disc from the center outward
with a cleaning cloth.
• Never use solvents such as benzine or alcohol to clean the disc.
Periodically wipe the contacts on the back of the front panel with a cotton
swap moistened with alcohol.
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RDS operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
CD/MP3/WMA operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Page: 3
Before use
4
The front panel of this unit can be detached to prevent theft.
1 Press the (RELEASE) to open the front panel.
2 Push the front panel to right.
3 Pull the front panel.
4 Place the front panel in the supplied protective case.
Detachable front panel
Attachable front panel
The front panel of this unit can be attached to prevent theft.
1 Attach part A of the front panel to part B of the unit.
2 Attach part C of the front panel to part D of the unit while
pushing the front panel to right.
3 Close the front panel.
Notes
• When detaching or attaching the front panel, do not press the
display or control buttons.
• The control buttons may not work properly if the front panel is
not attached properly. If this occurs, gently press the front
panel.
• Do not leave the front panel in any area exposed to high
temperatures or direct sunlight.
• Do not drop the front panel or otherwise subject it to strong
impact.
• Do not allow such volatile agents as benzine, thinner, or
insecticides to come into contact with the surface of the front
panel.
• Do not try to disassemble the front panel.
Protective Case
4
2
3
Front panel
A
B
D
C
Page: 4
Front Panel
5
1 POWER [PWR / MUTE]
2 • VOLUME [VOL. / MULTI]
• SELECT
• MENU
• SKIP / SEARCH
• SEEK/ TUNE
• PROGRAM TYPE [PTY]
• MP3 TRACK +10/-10
• FOLDER UP/DOWN
3 DISPLAY [DISP / CLOCK]
4 EQUALIZER [EQ / WOW / XDSS]
5 • TRAFFIC ANNOUNCEMENT [TA]
• ALTERNATIVE FREQUENCIES [AF]
• REGIONAL [REG]
6 DISPLAY WINDOW
7 RELEASE
8 REMOTE SENSOR
9 IMAGE [IMG]
10 • AUTO STORE [AS]
• PRESET SCAN [PS]
11 PRESET STATION [1~6]
12 SHUFFLE [SHF]
13 REPEAT [RPT]
14 INTRO SCAN [SCAN]
15 PLAY/PAUSE B/X
16 [BAND]
17 SOURCE [SRC]
18 EJECT Z
WMA
MP3
WMA
MP3
PWR
DISP
EQ
TA
XDSS/WOW
AF/REG
CLOCK
PTY
SRC
MUTE
VOL./MULTI
IMG
BAND 1 SCAN
2 RPT
3 SHF
4 5 6 AS/PS
1 2 3 4 5 7
9
16
8
17 15 14 13 12 11 10
6
18
Page: 5
Remote control
6
1 Remove the battery holder with a pencil or ball point pen.
2 Install the battery on the battery holder.
3 Install the battery holder back into its original position.
Notes
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not used for a
long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control
completely clean and install a new battery.
Battery installation
10
12
14
15
16
1
3
8
9
4
5
2
6
7
11
13
1 POWER [PWR] / MUTE
2 SELECTION [SEL]
3 SOURCE [SRC]
4 PLAY / PAUSE B/X
5 INTRO SCAN [SCAN]
6 SHUFFLE [SHF]
7 • MP3 TRACK +10
• FOLDER UP U
U
8 • CD SKIP / SEARCH ?m m
• SEEK / TUNE ?m m
9 [BAND]
10 VOLUME UP / DOWN
11 NUMBER [#]
12 REPEAT [RPT]
13 NUMBER [0-9]
14 • CD SKIP / SEARCH M M?
• SEEK / TUNE M M?
15 DISPLAY [DISP.]
16 • MP3 TRACK -10
• FOLDER DOWN u
u WMA
MP3
WMA
MP3
WMA
MP3
WMA
MP3
Page: 6
Installation
7
Before installing, make sure that the ignition-switch is set to
OFF and remove the terminal of the car battery to avoid
short-circuiting.
1 Remove the existing receiver unit.
2 Make the necessary connections.
3 Install the installation sleeve.
4 Install the unit into the installation sleeve.
Removing the existing receiver unit.
If there is already an installation sleeve for the receiver unit in
the dashboard, it must be removed.
1 Remove the rear support from the unit.
2 Remove the front panel and trim ring from the unit.
3 Insert the lever A into the hole on one side of the unit.
Perform the same operation on the other side and pull the
unit out from the mounting sleeve.
Basic Installation
1 Slide the unit into the ISO-DIN frame.
2 Install screws removed from the old unit.
3 Slide the unit and frame into dash opening.
4 Install the dash panel or adapter plate.
5 Install the trim ring to the unit.
6 Install the faceplate by fitting right edge into position then
pushing left edge closed.
ISO-DIN Installation
5
4
3
1
2
6
Bend the claws
according to
the thickness
of the
dashboard
Front panel
Front panel
A
A
Page: 7
Connection diagram
8
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery #
terminal to avoid short circuits.
1
2
3
4
5
6
7
8
BATTERY
POWER
ANT
DIMMER SWITCH
IGNITION SWITCH
CONTROL RELAY
REMOTE ON (BLUE/WHITE)
AMPLLIFIER
(Optional)
PHONE MUTE (ORANGE)
DIMMER (PINK)
TO IGNITION (RED)
GROUND(-) (BLACK)
POWER ANTENNA (BLUE)
TO BATTERY(+) (YELLOW)
1. WHITE FL+
2. WHITE/BLACK STRIPE FL-
3. GRAY FR+
4. GRAY/ BLACK STRIPE FR-
5. GREEN RL+
6. GREEN/ BLACK STRIPE RL-
7. VIOLET RR+
8. VIOLET/ BLACK STRIPE RR-
A
A B
B
C
C
Page: 8
Connection
9
A
A From antenna
B
B To the wiring of the vehicle colors of leads.
• BLACK : This lead is for the ground connection.
• ORANGE : This lead is for the phone line connection.
• PINK : This lead is for the dimmer line
connection.
• RED : This lead is for connection to the power
supply terminal when the ignition switch is
set to ACC.
• YELLOW : This lead is for connection to the battery
(back-up) terminal from which power is
always supplied.
• BLUE : This lead is for the power antenna
connection.
• BLUE/WHITE : This lead is for the remote amplifier on
connection.
L
R
L
R
1
2
3
4
5
6
7
8
REAR
FRONT
C
C Speaker Connections
Connect the AUDIO OUTPUT connector of this unit to the
AUDIO INPUT connector of the Auxiliary Equipment.
Connecting to Auxiliary Equipment (Optional)
To AUDIO IN
To AUDIO IN
To AUDIO OUT
FL (Front Left)
FR (Front Right)
RL (Rear Left)
RR (Rear Right)
Page: 9
Basic operation
10
1 Press the PWR/MUTE (POWER/MUTE on the remote control) to cut the sound.
2 To cancel it, press again.
Mute
Press the PWR/MUTE (POWER/MUTE on the remote control) or any other button.
Note
When you insert the CD in the CD slot, the unit turns on.
Turning the unit on
Press and hold the PWR/MUTE (POWER/MUTE on the remote control) for more than 1.2
seconds.
Turning the unit off
Press the SRC repeatedly to select a source.
The indicator lights up in the following order. TUNER → CD → TUNER...
Selecting a source
Rotate the VOL./MULTI (Press VOLUME on the remote control) to adjust the sound
level.
Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the unit back on, it will operate at the memorized volume level.
Adjusting the volume
1 Press and hold the VOL./MULTI (MENU/SEL on remote control) for about 1 second.
The menu screen appears.
SRS focus y Beep y EON TA y DPI y TA
2 Push the VOL./MULTI toward up or down to scroll between menus.
(Press the U
U u
u on the remote control.)
3 Push the VOL./MULTI toward left or right to select the settings of your choose.
(Press the ?m m/M M? on the remote control.)
4 Press the VOL./MULTI shortly to exit main screen.
Setting the menu
You can see the clock pressing the DISP/CLOCK (DISP. on the remote control).
Checking the clock
Press the Z.
When the disc is ejected by pressing Z during playback, it will be loaded automatically after
10 seconds unless you pull out the disc from the unit.
Eject a disc
Page: 10
Basic operation
11
The equalizer lets you adjust the equalization to match the acoustic characteristics of
the car’s interior design.
Press the EQ/WOW/XDSS repeatedly. The indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1 t
USER2 t OFF
• POP : Optimized for R&B, Soul and Country music.
• CLASSIC : Optimized for orchestral music.
• ROCK : Optimized for Hard Rock and Heavy Metal music.
• JAZZ : Sweet sound with soft feeling.
• VOCAL : Powerful realism with strong sound quality.
• SALSA : Reproduces salsa music acoustics.
• SAMBA : Reproduces samba music acoustics.
• USER1 : Use the menu to set the sound level you want.
• USER2 : Use the menu to set the sound level you want.
You can adjust each sound level to your preference. Once you select a USER mode and then
make an adjustment, it automatically stored for the currently selected USER mode.
See “Adjusting the sound level” on page 12.
Using the EQ (Equalizer)
SRS focus
( HIGH / LOW )
Set the SRS focus quality.
Beep
( 2ND / ALL )
Set the beep sound every time a button is pressed.
• 2ND mode : The beep is only generated when a key is
long pressed (1 sec)
• ALL mode : The beep is generated when any key is pressed.
EON TA
( LOCAL /
DISTANCE)
• LOCAL : When the filed strength level of EON linked is less
than threshold level, the radio does not switch that
station, and customer can hardly listen to any
disturbances.
• DISTANCE : EON TA switch is tried to implemented by the
information of current station.
DPI • SOUND: If the sound of a station with different PI is heard
intermittently, the receiver mutes the sound after
1 second.
• MUTE : If the situation described above is repeated, the receiver
instantly mutes the sound.
TA • ALARM : When a newly tuned station has no TP information for 5
seconds, a double beep sound is output.
• SEEK : When the newly tuned station does not receive TP
information for 5 seconds, the receiver retunes to the
next station which has the same PI as the last
station, but has the TP information.
Page: 11
Basic operation
12
Adjusting the sound level
1 Press the VOL./MULTI (MENU/SEL on the remote control) repeatedly to select the mode
you want to adjust from volume, equalizer, balance and fader.
The indicator lights up in the following order.
VOL t EQ t BAL t FAD
2 Rotate the VOL./MULTI (Press VOLUME on the remote control) to adjust the sound
quality.
Push the VOL./MULTI toward left or right to move the next stage.
(Press ?m m/M M? on the remote control) : EQ setting
Press and hold the EQ/WOW/XDSS to select XDSS or XDSS+
XDSS t XDSS+ t SRS (FOCUS t TRU BASS t 3D-STEREO t WOW) t By pass
XDSS/XDSS+ : Improve the treble, bass sound.
Press the IMG repeatedly to select the background you want in the display window.
You can select one of 10 modes. It visualizes and displays the change of sound output during
play.
Using the IMAGE
Turn right Turn left
VOL Increase the volume level. Decrease the volume level.
EQ Increase the equalizer level. Decrease the equalizer level.
BAL Decrease the level of the right speaker(s). Decrease the level of the left speaker(s).
FAD Decrease the level of the rear speaker(s). Decrease the level of the front speaker(s).
Note
Normally the function work as sound level control, So you can not select EQ to adjust the EQ
level when is using the EQ (POP, CLASSIC, ROCK JAZZ, VOCAL, SALSA, SAMBA) mode.
1 Press and hold the EQ/WOW/XDSS to select SRS.
2 Press the EQ/WOW/XDSS repeatedly to select sub SRS.
• FOCUS : Improve the resolution sound.
• TRUBASS : Improve the bass sound to make spectacular.
• 3D-STEREO : Enjoy the 3D surround effect.
• WOW : Enjoy the SRS and TruBass simultaneously.
Notes
• is a trademark of the SRS Labs, Inc.
• WOW technology is incorporated under license of the SRS Labs, Inc.
SRS (Sound Retrieval System)
XDSS/XDSS+ (Extreme Dynamic Sound System)
Page: 12
Radio operation
13
1 Press the SRC to select the radio.
2 Press the BAND repeatedly to select a band.
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
3 Seek tuning : Push the VOL./MULTI toward left or right. (Press the ?m m M M? on
the remote control.) The tuner will scan the frequencies until a broadcast with strong
enough reception is found.
Manual tuning : Push and hold the VOL./MULTI toward left or right until MANUAL starts
flashing on the display, and then push it repeatedly.
(Press and hlod the ?m m/M M? on the remote control, and then press it repeatedly.)
The frequencies move up or down step by step.
Note
When the selected frequency is being broadcast in stereo, the “ ” indicator will light.
Listening to radio stations
You can easily store up to 6 broadcast frequencies for later recall at the touch of a
button.
1 Select the desired frequency.
2 Press one of the preset station 1 ~ 6 for more than 1 second.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
3 Repeat steps 1 and 2 to preset other stations.
The next time, you press the same preset station 1 ~ 6 the radio station frequency is
recalled from the memory.
Notes
• As FM1, FM2, FM3 have the same frequency range, up to 18 stations can be preset for
FM.
• When a station is preset on the preset station button on which another station of the same
band has already been preset, the previously preset station is automatically erased.
To scan the preset stations
Press the AS/PS. To stop the scanning, press the AS/PS.
To tune in the preset stations
Press the BAND to select the desired band and press the desired number (1-6).
The number of the preset station 1 ~ 6 is displayed and the preset station is received.
Storing and recalling broadcast frequencies
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press the SRC to select the tuner.
2 Press and hold the AS/PS for more than 1 second.
Scanning starts from the currently displayed frequency to higher frequencies and stops
when 6 stations have been preset or the receivable frequencies have been scanned once.
Page: 13
RDS operation
14
In normal RDS operation the display will indicate the station name. Pressing the
DISP/CLOCK enables you to cycle through the various data types in the following sequence:
(CT t FREQUENCY t PTY t RT t PS)
• CT (Time controlled by the channel)
• PTY (Program type recognition)
• RT (Radio text recognition)
• PS (Program Service name)
• PI (Program Identification)
• AF (Alternative Frequencies for the actual program)
• TP (Traffic Program Identification)
• TA (Traffic Announcement Identification)
RDS Display options
To select a certain program type out of the reception band, the following procedure
can be used.
1 Press the BAND to select FM mode.
2 After, Push the VOL./MULTI repeatedly toward down for selecting each mode.
music group t speech group t search off
3 Short press one of the preset station 1 ~ 6.
Each time this button is pressed, the display mode changes as follows.
PROGRAM TYPE function
Note
RDS is only available for FM reception.
No Music group
1.
2.
3.
4.
5.
6.
Pop M, Rock M
Easy M, Light M.
Classics, Other M
Jazz, Country
Nation M, Oldies
Folk M
No Speech group
1.
2.
3.
4.
5.
6.
News, Affairs, Info
Sport, Educate, Drama
Culture, Science, Varied
Weather, Finance, Children
Social, Religion, Phone In
Travel, Leisure, Document
Page: 14
RDS operation
15
To switch on or off the TA (Traffic Announcement) function, press the TA/AF/REG repeatedly.
• TA ON
Traffic programs and announcements can be automatically received using TP/TA features.
• TA OFF
Traffic programs and announcements can not be received using TP/TA features.
RDS REG function
To switch on or off the AF function (Alternative Frequencies) or the REG (Regional Network
Tracking) function, long press repeatedly the TA/AF/REG more than 2 seconds.
• AF ON / REG ON
Network-Tracking is activated. Regional mode is engaged (AF function changes between
stations broadcasting the same program at all times). Regional mode shall be selected only
in case of driving in certain local areas.
• AF ON / REG OFF
Network-Tracking is activated. AF function changes between stations belonging to the
broadcast network being received.
• AF OFF / REG OFF
Network-Tracking is deactivated. Only station name will be displayed. In case of poor
reception no alternative station can be used.
RDS AF function
Page: 15
CD/MP3/WMA operation
16
Playing an Audio CD and MP3/WMA Disc
The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 19.
If you change the source, CD play also stops (without ejecting the CD). Next time you select
“CD” as the source, CD play starts from where playback has been stopped previously.

 To directly play a file, press the NUMBER (#) on remote control and then press the track
number with 0-9 number.
Pause
1 Press the B
B/X during playback.
2 To return to playback, press the B
B/X again.
Moving to another track

 Push the VOL./MULTI toward left or right during playback to select the next track or to
return the beginning of the current track. (Press the ?m m/M M? on the remote
control.)

 Push the VOL./MULTI toward left to select the previous track. (Press the ?m m on the
remote control.) (If playing times is less then 4 seconds, there is no operation.)
Search
Push and hold the VOL./MULTI toward left or right for about 1 second during playback and
then release at the point you want. (Press the ?m m/M M? on remote control.)
Intro scan
1 Press the SCAN.
The FOLDER SCAN appears in the display window.
(The first 10 seconds of each files in the current selected folder on the disc are played.)
The SCAN ALL appears in the display window.
(The first 10 seconds of each files on the disc are played.)
Press and hold SCAN for about 1 seconds during playback.
The SCAN ALL appears in the display window.
(The first 10 seconds of each files on the disc are played.)
2 Press the SCAN again.
The SCAN OFF appears in the display window. (The intro scan is cancelled.)
Repeat
1 Press the RPT during playback.
The 1 RPT appears in the display window.
(The current selected music on the disc is played repeatedly.)
Press and hold RPT for about 1 seconds during playback.
The FOLDER RPT appears in the display window.
(The current selected folder on the disc is played repeatedly.)
2 Press the RPT again.
The RPT OFF appears in the display window. (The repeat mode is cancelled.)
WMA
MP3
WMA
MP3
CD
WMA
MP3
CD
WMA
MP3
CD
WMA
MP3
WMA
MP3
CD
WMA
MP3
CD
WMA
MP3
CD
WMA
MP3
CD
Page: 16
CD/MP3/WMA operation
17
Random
1 Press the SHF during playback.
The FOLDER SHF appears in the display window.
(The current selected folder on the disc is played randomly.)
The SHF ALL appears in the display window.
(All of the music on the disc is played randomly.)
Press and hold the SHF for about 1 seconds during playback.
The SHF ALL appears in the display window.
(All of the music on the disc is played randomly.)
2 Press the SHF again.
The SHF OFF appears in the display window.
(The random playback is cancelled.)
Note
During random playback, if you push the VOL./MULTI (press the ?m m on remote control)
toward the left, you won’t go back to the previous track.
CD TEXT / ID3 TAG
Some discs have certain information encoded on the disc during manufacture. These discs
may contain such information as title, artist’s name and album name and are called CD TEXT
discs.
When playing a disc containing information, you can see the information (Folder name, File
name, ID3 TAG, Title, Artist or Album) in the display window. If there is no information, “NO
TEXT” will be shown in the display window.
Press the DISP repeatedly during MP3/WMA/CD TEXT file playback.
MP3/WMA TRACK -10/+10 (If there is no folder or one folder.)
During playback, push the VOL./MULTI (press the u
u on remote control) toward the down to
skip to the previous 10 track, and push the VOL./MULTI (press the U
U on remote control)
toward the up to skip to the next 10 track.
MP3/WMA FOLDER UP/DOWN (If there are more than two folders.)
During playback, push the VOL./MULTI (press the u
u on remote control) toward the down to
go to the previous folder, and push the VOL./MULTI (press the U
U on remote control) toward
the up to go to the next folder.
Note
Time display appearing on the display part when playing VBR file may vary and there may be
some difference from actual time (both progress time and VBR are displayed at the same
time when playing file).
WMA
MP3
WMA
MP3
WMA
MP3
CD
WMA
MP3
CD
WMA
MP3
WMA
MP3
CD
Page: 17
Troubleshooting
18
Symptom Cause Correction
Power doesn’t
turn on.
The unit doesn’t
operate.
Playback is not
possible.
 The disc is dirty.
 The loaded disc is of a type this
unit cannot play.
 Clean disc.
 Check what type the disc.
There’s no
sound.
There’s audio
skipping.
The unit does
not operate
correctly even
when the
appropriate
remote control
buttons are
pressed.
 The volume level is low.
 This unit is not firmly secured.
 Adjust the volume.
 Secure this unit firmly.
No sound is
heard.
The volume
level will not
rise.
 Cables are not connected
correctly.
 Connect the cables correctly.
 Leads and connectors are not
properly connected.
 The fuse is blown.
 Noise and other factors are
causing the built-in
microprocessor to operate
incorrectly.
 Confirm once more that all
connections are correct.
 Rectify the problem that caused
the fuse to blow, and then replace
it. Be very sure to install the
correct fuse with the same rate.
 Turn the unit off and then on.
 Battery power is low.
 Some operations are prohibited
with certain discs.
 Load new battery.
 Check using another disc.
This product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
Page: 18
Specifications
19
MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use
“Easy-CD Creator” which creates an ISO9660 file system.
Customers should also note that permission is required in order to download MP3/WMA files and
music from the Internet.
Our company has no right to grant such permission.
Permission should always be sought from the copyright owner.
GENERAL
Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH (Max.)
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V
Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8 Ω
Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative
Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . .182 x 51 x 173 mm (Without Front Panel)
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 kg
CD
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.1%
Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 dB
RADIO
FM
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5-107.9 or 87.5-108 MHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7%
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 dBµV
AM (MW)
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520-1720 or 522-1620 kHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0%
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 dBµV
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for
the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city
office, waste disposal service or the shop where you purchased the product.

Question & answers

There are no questions about the LG LAC-M7600R yet.

Ask a question about the LG LAC-M7600R

Have a question about the LG LAC-M7600R but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the LG LAC-M7600R. Please make sure that you describe your difficulty with the LG LAC-M7600R as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.