LG LAC-M3700 manual

View a manual of the LG LAC-M3700 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: LG
  • Product: Car Radio
  • Model/name: LAC-M3700
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
LAC3700_ENG_
P/NO : MFL37340917
ENGLISH CAR CD/MP3/WMA Receiver
Read the manual carefully before using the unit
LAC3700/ 3705/ 3710/ 3715
Page: 1
2
The lightning flash with the arrowhead symbol, within an equilateral
triangle is intended to alert the user about the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully aware of
all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
Do not use for many hours at extremely low or high temperature.
(-10~60°C)
To reduce the risk of electric shock, do not remove the cover or back of this prod-
uct. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to dripping or
splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use the unit after
proper installation in your vehicle.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety note
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it
for future reference.
Should the unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures other than those specified
herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser
radiation when open. DO NOT STARE INTO BEAM.
Page: 2
3
8 cm
• A defective or soiled disc inserted into unit can cause sound to drop out
during playback.
• Handle the disc by holding its inner and outer edges.
• Do not touch the surface of the unlabeled side of the disc.
Do not stick paper or tape etc. on the surface.
Do not expose the disc to direct sunlight or excessive heat.
This unit cannot play 8cm disc (use 12cm disc only).
• Clean the disc before playback. Wipe the disc from the center outward
with a cleaning cloth.
• Never use solvents such as benzine or alcohol to clean the disc.
Periodically wipe the contacts on the back of the control panel with a
cotton swap moistened with alcohol.
A section whose title has one of the following symbols is applicable only to the disc
represented by the symbol.
Audio CDs MP3 files WMA files
WMA
MP3
CD
MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use
“Easy-CD Creator” which creates an ISO9660 file system.
Customers should also note that permission is required in order to download MP3/WMA files and
music from the Internet.
Our company has no right to grant such permission.
Permission should always be sought from the copyright owner.
This product is manufactured to comply with Directive 2005/83/EEC(ANNEX I , 3.2.9),
72/245/EEC, and 2006/95/EC.
Page: 3
4
Detaching the control panel
The control panel of this unit can be detached to prevent theft.
1 Press the “ ” (RELEASE) to open the control panel.
2 Hold the right part of the control panel.
3 Pull out the control panel.
4 Place the control panel in the supplied protective case.
Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remote control (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11
Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
CD/MP3/WMA operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table of contents
Before use
Attachable control panel
1 Align the left side of the panel with the stopper.
2 Push the right side or panel into the unit until it clicks.
1
2
Protective Case
4
3
Control panel
2
1
Caution
• The control buttons may not work properly if the control
panel is not attached properly. If this occurs, gently press
the display.
• Do not leave the control panel in any area exposed to high
temperatures or direct sunlight.
• Do not drop the control panel or otherwise subject it to
strong impact.
• Do not allow such volatile agents as benzine, thinner, or
insecticides to come into contact with the surface of the
control panel.
Page: 4
5
1 EJECT Z
2 [MUTE]
3 • Skip M?+
• Seek M?+
4 Remote Sensor - Optional
5 • Volume
• Power [PWR]
6 • Auto Store [AS]
• Preset Scan [PS]
• Equalizer [EQ]
7 DISC SLOT
8 • Search M +
• Tune M +
9 Display [DISP (CLOCK)]
10 Release
11 Select [SEL S]
12 • Search - m
• Tune - m
13 Preset Station [1-6]
14 • MP3 Track +10/-10 [F+/F-]
• Folder Up/Down [F+/F-]
15 Shuffle [SHF]
16 Repeat [RPT]
17 Intro Scan [SCAN]
18 Play/Pause B X
19 Extreme Dynamic Sound
System [XDSS]
20 [BAND]
21 • Skip - ?
?m
m
• Seek - ?
?m
m
22 SOURCE [SRC S
S]
WMA
MP3
WMA
MP3
1 Power [POWER] / Mute
2 Select [SEL]
3 Source [SRC]
4 Play / Pause B/X
5 Intro Scan [SCAN]
6 Shuffle [SHF]
7 • MP3 Track +10
• Folder Up [F+]
8 • CD Skip
/ Search ?m m
• Seek / Tune ?m m
9 [BAND]
10 Volume Up / Down
11 Number [#]
12 Repeat [RPT]
13 Preset Station [1-6]
14 Number [0 -9]
15 • CD Skip
/ Search M M?
• Seek / Tune M M?
16 Display [DISP.]
17 • MP3 Track -10
• Folder Down [F-]
WMA
MP3
WMA
MP3
WMA
MP3
WMA
MP3
Control panel
Remote control (optional)
10
12
15
16
17
1
3
8
9
4
5
2
6
7
11
14
13
Page: 5
6
1 Pull out the battery holder with a sharp product
like a ball point pen.
2 Put the battery with and correctly on the
battery holder.
3 Push the battery holder back into its original
position.
Note
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not
used for a long period of time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
Before installing, make sure that the ignition-switch is set to
OFF and remove the terminal of the car battery to avoid
short-circuiting.
1 Remove the existing receiver unit.
2 Make the necessary connections.
3 Install the installation sleeve.
4 Install the unit into the installation sleeve.
A
A
Bend the claws
according to
the thickness
of the
dashboard
Control panel
If there is already an installation sleeve for the receiver unit
in the dashboard, it must be removed.
1 Remove the rear support from the unit.
2 Remove the control panel and trim ring from the unit.
3 Insert the lever A into the hole on one side of the unit.
Perform the same operation on the other side and pull
the unit out from the mounting sleeve.
5
4
3
1
2
6
Control panel
1 Slide the unit into the ISO-DIN frame.
2 Fit screws removed from the old unit.
3 Slide the unit and frame into the dash opening.
4 Install the dash panel or adapter plate.
5 Install the trim ring to the unit.
6 Install the control panel to the unit.
Battery Installation
Basic Installation
Removing the existing receiver unit
ISO-DIN Installation
Installation
Page: 6
7
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery #
terminal to avoid short circuits.
Connection diagram
BATTERY
POWER
Antenna
DIMMER SWITCH
IGNITION SWITCH
CONTROL RELAY
REMOTE ON (BLUE/WHITE)
AMPLIFIER
(Optional)
PHONE MUTE (ORANGE)
DIMMER (PINK)
TO IGNITION (RED)
GROUND(-) (BLACK)
POWER ANTENNA (BLUE)
TO BATTERY(+) (YELLOW)
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
B
A
A
A
A
A
A
A
A 1
2
4
5
6
7
8
1
2
3
4
5
6
7
8
A
A
B
B
C
C
B 1
1. Violet : Rear Right +
B 2
2. Violet/ Black Stripe : Rear Right –
B 3
3. Gray : Front Right +
B 4
4. Gray / Black Stripe : Front Right –
B 5
5. White : Front Left +
B 6
6. White/Black Stripe : Front Left –
B 7
7. Green : Rear Left +
B 8
8. Green/ Black Stripe : Rear Left –
To Speaker
To Vehicle
(Optional)
(Optional)
r
r
Page: 7
8
A
A From antenna
B
B To the wiring of the vehicle colors of leads.
• BLACK: This lead is for the ground connection.
• ORANGE: This lead is for the phone line connection.
• PINK: This lead is for the dimmer line connection.
• RED: This lead is for connection to the power supply terminal when the ignition
switch is set to ACC.
• YELLOW: This lead is for connection to the battery (back-up) terminal from which
power is always supplied.
• BLUE: This lead is for the power antenna connection.
• BLUE/WHITE: This lead is for the remote amplifier on connection.
L L
R R
1
2
3
4
5
6
7
8
REAR REAR
FRONT FRONT
C
C Speaker Connections
Connecting to Auxiliary Equipment (Optional)
Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary
Equipment.
Amplifier
To AUDIO IN
To AUDIO IN
To AUDIO OUT
FL (Front Left)
FR (Front Right)
RL (Rear Left)
RR (Rear Right)
Page: 8
9
Basic operation
Turning the unit on
Press PWR (POWER on the remote control) or any other button.
Note
When you insert the CD in the CD slot, the unit turns on.
Turning the unit off
Press PWR (or press and hold POWER on the remote control).
Selecting a source
Press SRC S
S repeatedly to select a source.
The indicator lights up in the following order. TUNER → CD → AUX → TUNER...
Note
You cannot select a source if a CD is not inserted.
Adjusting the volume
Rotate PWR (Press VOLUME on the remote control) to adjust the sound level.
Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the unit back on, it will operate at the memorized volume level.
Mute
1 Press MUTE (POWER on the remote control) to cut the sound.
2 To cancel it, press again.
Changing the general settings
1 Press and hold SEL [S] (SEL on remote control) so that one of menu items appears.
2 Press SEL [S] (SEL on remote control) to scroll between menus.
DEMO OFF t BEEP 2ND
3 Rotate PWR clockwise or unclockwise to select one of the settings specified belows.
(Press VOLUME on the remote control.)
4 Press and hold SEL [S] (SEL on remote control) to finish the setting.

 DEMO OFF/ ON
You can change the initial indication on the display to information name (function name,
EQ name, etc...) while listen to a source.
DEMO ON
Displays information name while listen to source.
DEMO OFF
Cancels the function.
Page: 9
10

 BEEP 2ND / ALL
Sets the beep sound every time a button is pressed.
BEEP 2ND
The beep is generated when a key is long pressed. (1 sec)
BEEP ALL
The beep is generated when any key is pressed.
Using the EQ (Equalizer) - * Optional
Press EQ repeatedly. The indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ* t VOCAL* t SALSA* t SAMBA* t USER1*
t USER2* t OFF
• POP : Optimized for R&B, Soul and Country music.
• CLASSIC : Optimized for orchestral music.
• ROCK : Optimized for Hard Rock and Heavy Metal music.
• JAZZ* : Sweet sound with soft feeling.
• VOCAL* : Powerful realism with strong sound quality.
• SALSA* : Reproduces salsa music acoustics.
• SAMBA* : Reproduces samba music acoustics.
• USER1* : Use the menu to set the sound level you want.
• USER2* : Use the menu to set the sound level you want.
You can adjust each sound level to your preference. Once you select a USER mode and then
make an adjustment, it automatically stored for the currently selected USER mode.
Adjusting the sound level
1 Press SEL [S] (SEL on the remote control) repeatedly to select the mode you want to
adjust from volume, bass, middle, treble, balance and fader.
The indicator lights up in the following order.
VOL t BAS t MID* t TRB t BAL t FAD
2 Rotate the PWR (Press VOLUME on the remote control) to adjust the sound quality.
Note
When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS, MID*, TRB)
settings.
Turn right Turn left
VOL Increase the volume level. Decrease the volume level.
BAS Increase the bass level. Decrease the bass level.
MID* Increase the middle level. Decrease the middle level.
TRB Increase the treble level. Decrease the treble level.
BAL Decrease the level of the
left speaker(s).
Decrease the level of the right
speaker(s).
FAD Decrease the level of the front
speaker(s).
Decrease the level of the rear
speaker(s).
Indication
Page: 10
11
Radio operation
Listening to radio stations
1 Press SRC S
S to select the tuner.
2 Press the BAND repeatedly to select a band.
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
3 Auto Seek : Press - ?
?m
m / M? + (?m m/M M? on the remote control).
When a station is received, searching stops.
Manual Seek : Press the m/M (Press the ?m m/M M? on the remote control
for more than 2 seconds and then repeatedly.) repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1 Press BAND to select desired band you want to store.
2 Select the desired frequency.
3 Press one of preset buttons 1-6 and hold until the beep sound.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
4 Repeat steps 1-3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is
recalled from the memory.
Note
• Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored
in the memory.
• When a station is stored on the preset numbers on which another station of the same band
has already been preset, the previously preset station is automatically erased.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press and hold AS/PS for more than 1 second.
The six strongest broadcast frequencies will be stored under preset button 1-6 in the order
of their signal strength.
2 To cancel, press AS/PS.
XDSS+ (Extreme Dynamic Sound System)
1 Press XDSS
XDSS+ : Improves the treble, bass sound.
2 To cancel, press XDSS again.
Setting the clock
1 Press the DISP (CLOCK) and then, press and hold DISP (CLOCK) for more 1 second.
2 Press the M?+ to adjust the hour.
3 Press the - ?m to adjust the minute.
Checking the clock
You can see the clock pressing DISP (CLOCK) (DISP. on the remote control).
Page: 11
12
To scan the preset stations
Press AS/PS. Each preset station appears. To cancel, press AS/PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1-6 (preset
button 1-6 on the remote control).
The preset station of the preset button 1-6 is displayed and the preset station is received.
CD/MP3/WMA operation
Playing an Audio CD and MP3/WMA Disc
The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 3.
If you change the source, CD play also stops (without ejecting the CD). Next time you select
“CD” as the source, CD play starts from where playback has been stopped previously.

 To directly play a file, press NUMBER (#) on remote control and then press the track
number with 0-9 number.
Pause
1 Press B
B/X during playback.
2 To return to playback, press B
B/X again.
Skip to next track/file
Press briefly M? + (M M? on the remote control) to select the next track or file.
Skip to previous track/file
Press briefly - ?
?m
m (?m m on the remote control) within 3 seconds of playing time.
Return to the beginning of the current track/file
Press briefly - ?
?m
m (?m m on the remote control) after 4 seconds of playing time.
Search
Press and hold - m
m / M + (?m m/M M? on remote control) for about 1 second
during playback and then release at the point you want.
Intro scan
The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder
( SCAN) on the disc are played.
1 Press SCAN.
– SCAN (or SCAN ) appears on the display window.
Press and hold SCAN for about 2 seconds during playback.
– SCAN appears on the display window.
2 Press SCAN again.
– SCAN or SCAN disappear from the display window and The intro scan is cancelled.
WMA
MP3
CD
WMA
MP3
Page: 12
13
Repeat
The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly.
1 Press RPT during playback.
– 1 RPT appears on the display window.
2 Press and hold RPT for about 2 seconds during playback.
– RPT appears on the display window.
3 Press RPT again.
– 1 RPT or RPT disappear from the display window and the repeat mode is cancelled.
Shuffle
All of the tracks/files (SHF) or the current selected folder ( SHF) on the disc is played
randomly.
1 Press SHF during playback.
– SHF (or SHF ) appears on the display window.
Press and hold SHF for about 2 seconds during playback.
– SHF appears on the display window.
2 Press SHF again.
– SHF or SHF disappear from the display window and the random playback is can
celled.
Note
During random playback, if you press - ?
?m
m (?m m on remote control), you won’t go back
to the previous track.
CD TEXT / ID3 TAG
When playing a disc containing information, you can see the CD TEXT/ID3 TAG information.
In CD TEXT, information about the disc (disc title, performer and track title) is recorded.
In a ID3 TAG, information about the file (Alburm title/ Song title/ Performer name) is recorded.
In a WMA Content, information about the file (Song title/ Performer name) is recorded.
If there is no information, “NO TEXT” will be shown in the display window.
Press DISP (DISP. on the remote control) repeatedly during MP3/WMA/CD TEXT file
playback.
To go to a particular quickly (+10/-10 steps)
(If there is no folder or one folder.)
Press F+ to skip to the next 10 track, and press F- to skip to the previous 10 track.
To skip to the next or previous folder
(If there are more than two folders.)
Press F+ to skip to the next folder, and press F- to skip to the previous folder.
Note
Time display appearing on the display part when playing VBR file may vary and there may be
some difference from actual time (both progress time and VBR are displayed at the same
time when playing file).
WMA
MP3
WMA
MP3
WMA
MP3
CD
WMA
MP3
WMA
MP3
WMA
MP3
CD
Page: 13
14
Specifications
GENERAL
Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH (Max.)
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V
Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Ω
Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative
Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . .181.5 x 50 x 200 mm (Without Control Panel)
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 kg
CD SECTION
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.12%
Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 dB
RADIO SECTION
FM
Frequency Range . . . . . . . . . . . . . . . . . . . . . .87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7%
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 dBµV
AM (MW)
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520-1720 or 522-1620 kHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0%
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 dBµV
Designs and specifications are subject to change without notice.
Troubleshooting
: Symptom / : Cause
: Correction
Power doesn’t turn on. / The unit
doesn’t operate.
Leads and connectors are not properly
connected.
Confirm once more that all
connections are correct.
The fuse is blown.
Rectify the problem that caused the
fuse to blow, and then replace it. Be very
sure to install the correct fuse with the same
rate.
Noise and other factors are causing
the built-in microprocessor to operate
incorrectly.
Turn the unit off and then on.
Playback is not possible.
The disc is dirty.
Clean disc.
The loaded disc is of a type this unit
cannot play.
Check what type the disc.
No sound is heard. / The volume
level will not rise.
Cables are not connected correctly.
Connect the cables correctly.
There’s no sound.
The volume level is low.
Adjust the volume.
There’s audio skipping.
This unit is not firmly secured.
Secure this unit firmly.
The unit does not operate correctly
even when the appropriate remote
control buttons are pressed.
Battery power is low.
Load new battery.
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Co
Ca
Sy
Co
Ca
Co
Ca
Co
Ca
Sy
Co
Ca
Sy

Question & answers

There are no questions about the LG LAC-M3700 yet.

Ask a question about the LG LAC-M3700

Have a question about the LG LAC-M3700 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the LG LAC-M3700. Please make sure that you describe your difficulty with the LG LAC-M3700 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.