LG HR825T manual

View a manual of the LG HR825T below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: LG
  • Product: Blu-ray player
  • Model/name: HR825T
  • Filetype: PDF
  • Available languages: English, Italian

Table of Contents

Page: 0
OWNER’S MANUAL
Blu-ray Disc™/DVD Player
with built-in HDD & HD Tuner
HR825T
www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference..
ENGLISH
Page: 2
Getting Started 3
Getting
Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Page: 3
Getting Started
4
Getting
Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1.	 When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2.	 All electrical and electronic products
shall be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3.	 The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4.	 For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you
purchased the product.
Disposal of waste batteries/accumulators
1.	 When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product it means
they are covered by European Directive
2006/66/EC.
2. 	This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury, 0.002% of cadmium or
0.004% of lead.
3. 	All batteries/accumulators should be
disposed separately from the municipal
waste stream via designated collection
facilities appointed by the government
or the local authorities.
4. 	The correct disposal of Your old
batteries/ accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. 	For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city offi ce, waste disposal service or
the shop where You purchased the
product.
LG Electronics hereby declares
that this/these product(s) is/are
in compliance with the essential
requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC,
and 2006/125/EC.
European Standards Centre:
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
y
y Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
Page: 4
Getting Started 5
Getting
Started
1
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
y
y If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
y
y The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
y
y Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
Notes on Copyrights
y
y Recording equipment should be used only for
lawful copying and you are advised to check
carefully what is lawful copying in the area
in which you are making a copy. Copying of
copyright material such as films or music is
unlawful unless permitted by a legal exception
or consented to by the rights owner.
y
y This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
y
y CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE‘STANDARD DEFINITION’OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p UNIT
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
y
y Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analogue signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
y Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BD-
ROM Mark, BD+, or this product, please contact
an authorized Customer Service Centre.
y
y Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
y Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Page: 5
Table of Contents
6
Table of Contents
1	 Getting Started
3	 Safety Information
8	 Introduction
8	 –  About the “7” Symbol Display
8	 –  Symbols Used in this Manual
8	 –  Supplied Accesorries
8	 –  LG Remote
8	 –  What is SIMPLINK?
9	 –  Playable Discs
10	 –  File compatibility
11	 –  Regional Code
11	 –  AVCHD (Advanced Video Codec High
Definition)
11	 –  System Requirements
11	 –  Compatibility Notes
12	 Remote control
13	 Main Unit
2	 Connecting
14	 Connections to Your TV
14	 –  Antenna connection to your TV and this
unit
15	 –  HDMI Connection
16	 –  Composite connection
16	 –  Resolution Setting
17	 Connecting to an Amplifier
17	 –  Connecting to an Amplifier via HDMI
Output
18	 –  Connecting to an Amplifier via Digital
Audio Output
18	 –  Connecting to an Amplifier via 2
Channel Audio Output
19	 Connecting to your Home Network
19	 –  Wired network connection
20	 –  Wired Network Setup
22	 USB device connection
22	 –  Playback content in the USB device
3	 System Setting
23	 Auto Set UP
24	 Home Menu Overview
24	 –  Basic button operations
24	 Settings
24	 –  Adjust the Setup Settings
25	 –  Settings for Digital TV
25	 –  Scanning programmes automatically
(Auto Tuning)
25	 –  Scanning programmes manually
(Manual Tuning)
26	 –  Editing Programme List (Channel Edit)
26	 –  Setting the DTV Lock
27	 –  Adjusting DTV Rating
27	 –  Setting the antenna power
27	 –  Setting the Timeshift
28	 –  [DTV] Menu
28	 –  [DISPLAY] Menu
30	 –  [LANGUAGE] Menu
30	 –  [AUDIO] Menu
32	 –  [LOCK] Menu
33	 –  [NETWORK] Menu
33	 –  [OTHERS] Menu
4	 Operating
35	 Using the Digital TV functions
35	 –  Viewing the Digital TV
35	 –  Changing Digital TV programmes
35	 –  Setting favourite programmes
36	 –  Viewing the programme information
36	 –  Selecting DTV audio language
36	 –  Selecting DTV subtitle language
37	 –  Programme Guide (Digital program
only)
38	 –  Using the timeshift function manually
38	 –  Using the timeshift function
automatically
38	 –  Using the teletext (Viewing Teletext)
39	 Recording TV programmes
39	 –  Normal Recording
39	 –  Timer Recording (Manual)
40	 –  Timer Recording (EPG)
40	 –  Canceling a timer recording
40	 –  Editing a timer recording
41	 –  Instant Timer Recording
Page: 6
Table of Contents 7
1
2
3
4
5
6
41	 General Playback
41	 –  Playing Discs
42	 –  Using the disc menu
42	 –  Resume playback
43	 –  Playing the recorded titles
43	 –  Searching the recorded titles
43	 –  Sorting the recorded titles
44	 –  Playing content contained in the internal
hard disk drive
44	 –  Searching content in the hard disk drive
by entering file name
45	 –  Playing Blu-ray 3D disc
46	 Advanced Playback
46	 –  Repeat Playback
46	 –  Repeating a specific portion
47	 –  Changing content list view
47	 –  Viewing content information
47	 –  Selecting a subtitle file
48	 –  Last Scene Memory
48	 On-Screen display
48	 –  Displaying content information on-
screen
49	 –  Playing from selected time
49	 –  Hearing different audio
49	 –  Selecting a subtitle language
50	 –  Watching from a different angle
50	 –  Changing the TV Aspect Ratio
50	 –  Changing the Picture Mode
51	 Copying
51	 –  Copying file(s)/folder(s) to the internal
hard disk drive
52	 –  Copying file(s)/folder(s) from the
internal hard disk drive to a USB storage
device
53	 –  Deleting a file(s)/folder(s)
54	 –  Naming a file/folder
54	 Enjoying BD-LIVE
55	 Playing movie file and VR discs
56	 –  Selecting a subtitle file
56	 –  Changing subtitle code page
57	 Viewing a photo
58	 –  Options while viewing a photo
58	 –  Listening to music during a slide show
59	 Listening to music
60	 –  Audio CD Archiving
5	 Troubleshooting
61	 Troubleshooting
61	 –  General
61	 –  Picture
62	 –  Sound
62	 –  Network
63	 –  Recording
63	 –  Customer Support
63	 –  Open source software notice
6	 Appendix
64	 Controlling a TV with the Supplied Remote
Control
64	 –  Setting up the remote to control your TV
65	 Area Code List
66	 Language code List
67	 Trademarks and Licenses
68	 Network Software Update
68	 –  Network update notification
68	 –  Software Update
70	 Audio Output Specifications
71	 About the internal hard disk drive
72	 Video Output Resolution
73	 Specifications
74	 Maintenance
74	 –  Notes on Discs
74	 –  Handling the Unit
74	 Important Information Relating to Network
Services
Page: 7
Getting Started
8
Getting
Started
1
Introduction
About the “7” Symbol Display
“7”may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Symbols Used in this Manual
,
, Note
Indicates special notes and operating features.
>
>Caution
Indicates caution for preventing possible damages
from abuse.
A section whose title has one of the following
symbols are applicable only to the disc represented
by the symbol.
BD BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode and
finalized
AVCHD DVD±R/RW in AVCHD format
ACD Audio CDs
MOVIE
Movie files contained in the
Disc/USB/HDD
MUSIC
Music files contained on a
Disc/USB/HDD
PHOTO Photo files contained on a
Disc/USB/HDD
REC Titles recorded via this unit
Supplied Accesorries
Remote control (1) Battery (1)
RF cable (1) Owner’s Manual
LG Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point.
Visit“Apple iTunes”or“Google Apps Marketplace”for
detailed information of“LG Remote”.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
,
, Note
Page: 8
Getting Started 9
Getting
Started
1
Playable Discs
Blu-ray Disc
y
y Discs such as movies that can be
purchased or rented.
y
y BD-R/RE discs that contain Movie,
Music or Photo files.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
y
y Video mode and finalized only
y
y Supports the dual layer disc also
y
y Finalized AVCHD format
y
y DVD±R discs that contain Movie,
Music or Photo files.
DVD-RW (8 cm / 12 cm disc)
y
y VR mode, Video mode and
finalized only
y
y Finalized AVCHD format
y
y DVD-RW discs that contain Movie,
Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
y
y Video mode and finalized only
y
y Finalized AVCHD format
y
y DVD+RW discs that contain
Movie, Music or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
y
y CD-R/RW discs that contain audio
titles, Movie, Music or Photo files.
y
y Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD-R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
y
y Depending on the recording software & the
finalization, some of recorded discs (CD-R/
RW or DVD±R/RW) may not be playable.
y
y BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
y
y If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
y This unit requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
y Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
y
y Hybrid disc have both BD-ROM and DVD (or
CD) layers on one side. On such discs, BD-
ROM layer will be only played back in this
player.
y
y Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always
be obtained from / guaranteed by the
copyright owner.
y
y You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. If you set the
option to“Live System”, the disc cannot be
played on LG player. (Mastered/Live File
System : Disc format system for windows
Vista)
,
, Note
Page: 9
Getting Started
10
Getting
Started
1
File compatibility
Overall
Available File extensions: “.jpg”,“.jpeg”,“.png”,“.avi”,
“.divx”,“.mpg”,“.mpeg”,“.mkv”,“.mp4”,“.mp3”,
“.wma”,“.ts”
y
y The file name is limited to 180 characters.
y
y Depending on the size and number of the files,
it may take several minutes to read the contents
on the media.
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution: 1920 x 1080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt),
VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0
(.sub/.txt), DVD Subtitle System (.txt)
Playable Codec format: “DIVX3.xx”,“DIVX4.xx”,
“DIVX5.xx”,“XVID”,“DIVX6.xx”(Standard playback
only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”,“DTS”,
“MP3”,“WMA”,“AAC”,“AC3”
y
y Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency: within 32-48 kHz (WMA),
within 16-48 kHz (MP3)
Bit rate: within 20-320 kbps (WMA), within 32-320
kbps (MP3)
y
y HD movie files contained on the CD or USB
1.0/1.1 may not be played properly. Blu-ray
Disc, DVD or USB 2.0 are recommended to
play back HD movie files.
y
y This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. For a file
with higher level, there will be an warning
message on the screen.
y
y This player does not support the file that
are recorded with GMC*1
or Qpel*2
. Those
are video encoding techniques in MPEG4
standard, like DivX or XVID.
*1	GMC – Global Motion Compensation
*2	Qpel ­
– Quarter pixel
y
y HD movie files that need high performance
playback could react slowly.
y
y The total playback time indicated on the
screen may not be correct for .ts files.
,
, Note
MUSIC
Sampling frequency: between 8 - 48 kHz (WMA),
within 11 - 48 kHz (MP3),
44.1 and 48 kHz (LPCM)
Bit rate: between 8 - 320 kbps (WMA, MP3), 768
kbps and 1.536 Mbps (LPCM)
y
y This unit cannot support the ID3 Tag
embedded MP3 file.
y
y The total playback time indicated on the
screen may not be correct for VBR files.
,
, Note
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
y
y Progressive and lossless compression photo
image files are not supported.
y
y Depending on the size and number of the photo
files, it may take several minutes to read the
contents of the media.
y
y This player can not display thumbnail image in
some files.
Page: 10
Getting Started 11
Getting
Started
1
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labelled same as the rear of the unit or“ALL”.
AVCHD (Advanced Video
Codec High Definition)
y
y This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
y
y The AVCHD format is a high definition digital
video camera format.
y
y The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
the conventional image compressing format.
y
y Some AVCHD discs use the“x.v.Color”format.
y
y This player can playback AVCHD discs using
“x.v.Color”format.
y
y Some AVCHD format discs may not be played,
depending on the recording condition.
y
y AVCHD format discs need to be finalized.
y
y “x.v.Color”offers a wider colour range than
normal DVD camcorder discs.
System Requirements
For high definition video playback:
y
y High definition display that has COMPONENT or
HDMI input jacks.
y
y BD-ROM disc with high definition content.
y
y HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
y
y For up-conversion of standard definition DVD, a
HDMI or HDCP capable DVI input on your display
device is required for copy-protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
y
y An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
y
y Main, centre, surround speakers and subwoofer
as necessary for chosen format.
Compatibility Notes
y
y Because BD-ROM is a new format, the can be
issues regarding certain disc, digital connection
and other compatibility issues. If you experience
compatibility problems, please contact an
authorized Customer Service Center.
y
y Viewing high-definition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
y Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
y Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection as the audio output.
y
y You can use a USB device that is used to store
some disc related information, including
downloaded on-line content. The disc you are
using will control how long this information is
retained.
y
y While watching 3D contents, on-screen displayed
may not be displayed properly. To display proper
on-screen display, turn off 3D mode on TV.
Page: 11
Getting Started
12
Getting
Started
1
Remote control
Battery Installation
Remove the battery cover on
the rear of the Remote Control,
and insert two R03 (size AAA)
batteries with 4 and 5
matched correctly.
•  •  •  •  •  • a •  •  •  •  •  • 
1 (POWER): Switches the unit
ON or OFF.
OPEN/CLOSE (B): Opens and
closes the disc tray.
?: Feature is not available.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
REPEAT: Repeats a desired
section or sequence.
TV/RADIO: Switches between
TV and radio modes.
TV Control Buttons: See page
64.
•  •  •  •  •  • b •  •  •  •  •  •
c/v: Searches backward
or forward.
C/V: Goes to next or
previous chapter/track/file.
z: Starts playback.
M: Pauses playback or recording.
Z: Stops playback.
TIME SHIFT: Activates pause live
TV/playback (timeshift) for a live
TV programme.
•  •  •  •  •  • c •  •  •  •  •  •
HOME (n): Accesses or
removes the HOME menu.
INFO/MENU (m): Displays or
exits On-Screen Display.
W/S/A/D (left/right/up/
down): Navigates on-screen
displays.
ENTER (b): Acknowledges
menu selection or displays the
TV info.
BACK (1): Exits the menu or
back to previous step.
DISC MENU/REC.LIST: Accesses
menu on a disc or switches
between recording list menu.
•  •  •  •  •  • d •  •  •  •  •  •
GUIDE: Displays the EPG menu.
PR (-/+): Scans up or
down through memorized
programmes.
PR LIST: Displays the Channel
list.
Coloured (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC] and [DTV]
menu.
EXIT: Exits a menu or hides on-
screen information.
SUBTITLE: Selects a subtitle
language.
TEXT: Switches between teletext
mode and normal TV viewing.
MUTE (@): Mutes the sound.
REC. (X): Starts recording.
TIMER REC.: Displays [Timer
Recording] menu.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s popup
menu, if available.
Page: 12
Getting Started 13
Getting
Started
1
Main Unit
a	 Disc Tray
b	 Display window
c	 Remote Sensor
d	 B (Open/Close)
e	 T (Play/Pause)
f	 I (Stop)
g	1 (Power)
h	 USB Port
a	 ANTENNA IN
b	 LAN port
c	 HDMI OUT (TO TV)
d	 VIDEO OUT
e	 DIGITAL AUDIO OUT (COAXIAL)
f	 2CH AUDIO OUT (Left/Right)
g	 AC IN connector
Connect the supplied power cord
h	 ANTENNA OUT (TO TV)
Page: 13
Connecting
14
Connecting
2
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
y
y Antenna connection (page 14)
y
y HDMI connection (page 15)
y
y Composite connection (page 16)
y
y Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
y
y Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
y
y Make sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
y
y Do not connect the player’s AUDIO OUT
jack to the phono in jack (record player) of
your audio system.
y
y Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
,
, Note
Antenna connection to your
TV and this unit
Connect one end of the RF cable to ANTENNA
OUT(TO TV) jack on the unit and other end to
ANTENNA IN jack on your TV. Passes the signal from
the ANTENNA IN jack to your TV/monitor.
Connect the Terrestrial TV antenna to the ANTENNA
IN jack on the unit. If you want to use an indoor
antenna, use one with a signal amplifier rated at 5V,
100mA and set [Antenna 5V] to [ON] in the setup
menu (See page 28).
Rear of this unit
TV
ANTENNA
RF Cable
Rear of this unit
TV
Page: 14
Connecting 15
Connecting
2
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.
Rear of this unit
TV
Rear of this unit
TV
HDMI Cable
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
y
y If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
y
y When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to“Resolution Setting”on page 16.)
y
y Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 29).
y
y Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
y
y When the HDMI connection with HDCP is
not verified, TV screen is changed to black
screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
y
y If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
,
, Note
Additional Information for HDMI
y
y When you connect a HDMI or DVI compatible
device make sure of the following:
-
- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
- The connected device’s video input is set
correctly for this unit.
-
- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
y
y Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-
- The picture will not be displayed properly
with non-HDCP device.
-
- This player does not playback and TV screen
is changed to black screen.
Page: 15
Connecting
16
Connecting
2
Composite connection
Connect the VIDEO OUT jack on the Recorder to
the video in jack on the TV using the video cable
supplied. Connect the Left and Right AUDIO OUT
jacks on the Recorder to the audio left/right in jacks
on the TV using the supplied audio cables.
Audio Cable
Video
Cable
TV
Rear of this unit
Resolution Setting
The player provides several output resolutions for
HDMI OUT jacks. You can change the resolution
using [Setup] menu.
1.	 Press HOME (n).
2.	 Use A/D to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
3.	 Use W/S to select [DISPLAY] option then
press D to move to the second level.
4.	 Use A/D to select the [Resolution] option
then press ENTER (b) to move to the third level.
5.	 Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
Page: 16
Connecting 17
Connecting
2
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
y
y HDMI Audio connection (page 17)
y
y Digital Audio connection (page 18)
y
y 2CH Analogue Audio connection (page 18)
Since many factors affect the type of audio output,
see“Audio Output Specifications”for details (pages
70-71).
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one or
more of the audio formats supported by your unit.
Check the receiver manual and the logos on the
front of the receiver. (PCM Stereo, PCM Multi-Ch,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable. You will need to activate the player’s
digital output. (See“[AUDIO] Menu”on pages 30-
31.)
TV
Amplifier/Receiver
Rear of this unit
TV
HDMI
Cable
HDMI
Cable
Amplifier/Receiver
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack.
Page: 17
Connecting
18
Connecting
2
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s DIGITAL AUDIO OUT (COAXIAL)
jack to the corresponding in jack (COAXIAL) on your
amplifier.
Use an optional digital (coaxial) audio cable. You
will need to activate the unit’s digital output. (See
“[AUDIO] Menu”on pages 30-31.)
Amplifier/Receiver
Coaxial Cable
Rear of this unit
Amplifier/Receiver
Connecting to an Amplifier via
2 Channel Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks
on the unit to the audio left and right in jacks on
your amplifier, receiver, or stereo system, using
audio cables.
Amplifier/Receiver
Rear of this unit
Audio Cable
Amplifier/Receiver
Page: 18
Connecting 19
Connecting
2
Connecting to your
Home Network
This unit can be connected to a local area network
(LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and
streaming services.
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable (CAT5
or better with RJ45 connector). In the example
configuration for wired connection below, this
player would be able to access content from either
of the PCs.
y
y When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
y Do not connect a modular phone cable to
the LAN port.
y
y Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
,
, Note
WAN
LAN 1
LAN 2
LAN 3
LAN Cable
Rear of this unit
Router
PC
PC
Broadband
Service
Page: 19
Connecting
20
Connecting
2
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1.	 Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2.	 Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
,
, Note
3.	 Select [OK] and press ENTER (b) to apply
network settings.
4.	 The player will ask you to test the network
connection. Select [OK] and press ENTER
(b) to complete the network connection.
5.	 If you select [Test] and press ENTER
(b) at step 5 above, the network connection
status is displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
Page: 20
Connecting 21
Connecting
2
Notes on Network Connection:
y
y Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y
y Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y
y Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
y
y The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y
y Some internet content may require a higher
bandwidth connection.
y
y Even if the player is properly connect and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
y
y Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
y
y Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
y
y A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
y
y You must use a Router to use xDSL service.
y
y A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
y
y The use of a“Router”may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
y
y Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
Page: 21
Connecting
22
Connecting
2
USB device connection
This unit can play movie, music and photo files
contained on a USB device.
Playback content in the USB
device
1.	 Insert a USB device into the USB port until it fits
into place.
2.	 Press HOME (n).
3.	 Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4.	 Select the [USB] option using W/S, and press
ENTER (b).
5.	 Select a file using W/S/A/D, and press d
(PLAY) or ENTER (b) to play the file.
6.	 Withdraw the USB device carefully after exiting
the USB mode.
y
y This unit supports USB flash memory/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing files (music, photo,
movie). However, for BD-Live, only FAT16
and FAT32 formats are supported. The USB
device can be used for local storage for
enjoying BD-Live discs from the Internet.
y
y Please use the Internal HDD or USB flash
memory/external HDD formatted in either
FAT16 or FAT32 when using BD-Live.
y
y This unit can support up to 4 partitions of
the USB device.
y
y Do not extract the USB device during
operation (play, recording, etc.).
y
y A USB device which requires additional
programme installation when you
have connected it to a computer, is not
supported.
y
y USB device: USB device that supports
USB1.1 and USB2.0.
y
y Movie, Music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
y
y Regular back up is recommended to
prevent data loss.
y
y If you use a USB extension cable or USB HUB
or USB multi card reader, the USB device
may not be recognized.
y
y Some USB device may not work with this
unit.
y
y Digital camera and mobile phone are not
supported.
y
y The USB Port on this unit cannot be
connected to a PC. The unit cannot be used
as a storage device.
y
y Unformatted media cannot be used. Please
format before using.
y
y If USB HDD cannot be recognized, try
another different USB cable.
y
y Some USB cables may not supply enough
current for normal USB operation.
y
y Files over 4GB are supported with NTFS
format.
,
, Note
Page: 22
System Setting 23
System
Setting
3
Auto Set UP
You can reset the recorder to all its factory settings.
Some options cannot be reset (Rating and
Password). The [Auto Setup] menu appears on the
screen after the factory settings.
Step 1. Language Setting
1.	 Use W/S/A/D to select a language for the
on-screen display, and press ENTER (b).
Step 2. Channel Setting
1.	 Use W/S/A/D to select a country, and
press ENTER (b).
2.	 Input the new password using numerical
buttons. Enter it again to verify.
3.	 While the Start option is selected, and press
ENTER (b) to begin the channel search.
.
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Channel Setting]
function will be skipped.
4.	 Press ENTER (b).
Step 3. Time Setting
1.	 Use A/D to select an option among [Manual]
or [Auto], and press ENTER (b).
	 Auto: Set the programme that broadcasts
a clock signal and the clock will be set
automatically.
If the time that has automatically set is not
correct comparing your local time, you can set
additional time option.
	 Manual: If there is no channel that broadcasts
a clock signal in your area, you can set the time
and date manyally. Use W/S to select each
field, and input correct time and date using A/
D. You can use numerical buttons.
2.	 Press ENTER (b) to complete the time setting.
Step 4. Network Setting
Refer to“Wired network connection”on pages 19-
21 to complete the [Wired] setup option, and press
ENTER (b).
Page: 23
System Setting
24
System
Setting
3
Home Menu Overview
To access numerous functions of the unit, press
HOME on the remote.
Basic button operations
HOME: Accesses or removes the Home Menu.
A/D: Used to navigate on-screen displays.
ENTER (b): Acknowledges menu selection.
BACK: Exits the menu.
DTV
You can watch digital broadcasts.
(pages 35-41)
Movie
Starts video media’s playback or displays the
[MOVIE] menu.
Photo
Displays [PHOTO] menu. (pages 57-59)
Music
Displays [MUSIC] menu. (pages 59-61)
Setup
Displays [Setup] menu. (pages 28-34)
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1.	 Press HOME (n).
2.	 Use A/D to select [Setup] and press ENTER
(b). The [Setup] menu appears.
3.	 Use W/S to select the first setup option, and
press D to move to the second level.
4.	 Use W/S to select a second setup option,
and press ENTER (b) or D to move to the third
level.
5.	 Use W/S to select a desired setting, and press
ENTER (b) or D to confirm your selection.
Page: 24
System Setting 25
System
Setting
3
Settings for Digital TV
To use DTV functions, this recorder needs some
settings in advance.
Scanning programmes
automatically (Auto Tuning)
All available digital TV or radio programmes are
searched for and stored automatically based on the
selected country.
1.	 Press HOME.
2.	 Use A/D to select [Setup], and press ENTER
(b).
3.	 Use W/S to select [DTV], and press ENTER
(b).
4.	 Use W/S to select [Auto Tuning] and press
ENTER (b).
5.	 Use S to select [Start], and press ENTER (b) to
begin the channel search.
	 Select [Stop] and press ENTER (b) to stop the
scanning programmes.
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the
password correctly. (see page 26.)
,
, Note
Scanning programmes
manually (Manual Tuning)
Scans digital TV or radio programmes and adds the
detected programmes to the programme list.
1.	 Display [Setup] menu.
2.	 Use W/S to select [DTV], and press ENTER
(b).
3.	 Use W/S to select [Manual Tuning] and press
ENTER (b) to display the [Manual Tuning]
menu.
4.	 Use W/S/A/D to select the desired
multiplexer (MUX), Modulation option, and the
unit starts scanning automatically.
5.	 Use S to select the [Add] and press ENTER
(b) to add the programme the unit scans
automatically.
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the
password correctly. (see page 26.)
,
, Note
Page: 25
System Setting
26
System
Setting
3
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio programs
stored on this recorder using the [Channel Edit]
menu.
1.	 Display [Setup] menu.
2.	 Use W/S to select [DTV], and press ENTER
(b).
3.	 Use W/S/A/D to select [Channel Edit] and
press ENTER (b).
4.	 Press W to select [DTV] and use A/D to select
[DTV] or [Radio] programme list.
5.	 Use W/S/A/D to select a programme
you want to skip from the list, and press red
coloured (R) button.
	 If you do not want to skip the programme,
select the programme and press red coloured
(R) button again.
	 Use W/S/A/D to select a programme
you want to lock from the list, and press blue
coloured (B) button.
	 If you do not want to lock the programme,
select the programme and press blue coloured
(B) button again.
6.	 Press BACK (1) to return to the previous step.
	 Skip : If the programme is assigned to skip, you
can’t select that programme with PR button in
Remote control.
	 Block/unblock : If the programme is assigned
to block and [DTV Lock] in the [Setup] menu is
set to [Lock], you should enter the password to
watch the programme.
Setting the DTV Lock
Allows you to activate or deactivate all of the lock
schemes previously set. When the [DTV Lock] is set
to [Unlock].
1.	 Display [Setup] menu.
2.	 Use W/S/A/D to select [LOCK] and press
ENTER (b).
3.	 Use W/S to select [DTV Lock] and press ENTER
(b).
4.	 Input the password using numerical buttons.
If you have not set your password yet, input
“1111”and press ENTER (b).
5.	 Use W/S to select [Lock] and press ENTER (b)
to activate the DTV Lock.
Page: 26
System Setting 27
System
Setting
3
Adjusting DTV Rating
Viewing of some digital TV programmes can be
limited according to the age limit you set.
1.	 Display [Setup] menu.
2.	 Use W/S to select [LOCK] and press ENTER
(b).
3.	 Use W/S to select [DTV Rating] and press
ENTER (b).
4.	 Input the password using numerical buttons.
If you have not set your password yet, input and
press ENTER (b).
5.	 Use W/S to set the limitation level and press
ENTER (b).
Unlock
You can view all programs.
4 (Kids) - 18 (Adult)
Rating [4 (Kids)] has the most restrictions and
[18 (Adult)] is the least restrictive.
Setting the antenna power
If you are using indoor antenna with a signal
amplifier rated at DC 5V, 100mA, the recorder can
supply power through ANTENNA IN jack.
1.	 Display [Setup] menu.
2.	 Use W/S/A/D to select [Antenna 5V] and
press ENTER (b).
3.	 Use W/S to select [On], and press ENTER
(b) to supply antenna power.
The [Antenna 5V] option must be set to [Off]
when your indoor antenna is supplied the
power from the mains. If you set the [Antenna
5V] option to [On] for the indoor antenna
which is supplied power from the mains, it
may cause serious defect to this unit.
,
, Note
Setting the Timeshift
You can set the Time Shift function automatically
without pressing TIME SHIFT button. The timeshift
will start after Digital TV tuner mode is started.
1.	 Display [Setup] menu.
2.	 Use W/S to select [DTV], and press ENTER
(b).
3.	 Use W/S to select [Timeshift] and press ENTER
(b).
4.	 Use W/S to select [Auto] or [Manual] to apply
timeshift.
Page: 27
System Setting
28
System
Setting
3
[DTV] Menu
Auto Tuning
This option scans a programme and sets the
available programmes. Refer to page 25 for more
information.
Manual Tuning
Scans digital TV or radio programmes and adds the
found programmes to the programme list. Refer to
page 25 for more information
Channel Edit
This option allows you to edit the TV or Radio
programmes. Refer to page 26 for more information.
Antenna 5V
If you are using an indoor antenna, use one with
a signal amplifier rated at DC 5V, 100mA and set
this option to [On]. Refer to page 27 for more
information.
Timeshift
Set this option to [Auto] to use the Time Shift
function automatically without pressing TIME SHIFT
button. The timeshift will start after TV viewing is
started. Refer to page 27 for more information.
Software Auto Update
If you set this option to [On], the unit updates the
lastest software automatically through the built-in
digital tuner If the software update is available from
the broadcaster.
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
You cannot select [4:3 Letter Box] and [4:3
Pan Scan] option when the resolution is set to
higher than 720p.
,
, Note
Page: 28
System Setting 29
System
Setting
3
Resolution
Sets the output resolution of the HDMI video
signal. Refer to page 16 and 72 for details about the
resolution setting.
[Auto]
If the HDMI OUT jack is connected to TVs
providing display information (EDID), this
automatically selects the resolution best suited
to the connected TV.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
y
y When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
y
y Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz or 60 Hz to
match the video source format.
,
, Note
HDMI Color Setting
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
3D Mode
Select the type of output mode for Blu-ray 3D disc
playback. Refer to page 45 for more information
about Blu-ray 3D disc.
[Off]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
Blu-ray 3D disc playback will output as 3D
mode.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option
to [On] for displaying guide.
Page: 29
System Setting
30
System
Setting
3
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and on-
screen display.
Disc Menu/Disc Audio/Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
66.
[Off] (Disc Subtitle only)
Turn off Subtitle.
Depending on the disc, your language setting
may not work.
,
, Note
DTV Audio
Digital channels sometimes provide multiple audio
tracks, often in a different language or format
(Dolby Digital, Dolby Digital+, AVC, Mpeg, etc.). You
can set a default audio language with this setting.
If provided by the broadcaster, you can also select
a different audio language while viewing TV by
pressing AUDIO repeatedly. (See“Selecting DTV
audio language”on page 36.)
DTV Subtitle
Digital channels sometimes provide subtitles, often
in a different language. You can set a preferred
subtitle language with this setting, if DTV subtitles
are provided by the broadcaster. Press SUBTITLE
repeatedly to select a subtitle language while
viewing digital TV. (See“Selecting DTV subtitle
language”on page 36.)
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Since many factors affect the type of audio
output, see“Audio Output Specifications”on
pages 70-71 for details.
,
, Note
HDMI / Digital Output
Select the output sound format when a device
equipped with a HDMI or Digital Audio input jack
is connected to the HDMI OUT or DIGITAL AUDIO
OUT jack on this player.
[PCM Stereo]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with a DTS
decoder.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
y
y When [HDMI] option is set to [PCM Multi-
Ch], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
y
y If the [HDMI] or [Digital Output] option is
set to [DTS re-encode], the DTS Re-encode
audio is output for BD-ROM discs with
secondary audio and the original audio is
output for the other discs (like [Primary Pass-
Thru]).
,
, Note
Page: 30
System Setting 31
System
Setting
3
Sampling Freq.
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
,
, Note
DTS Neo:6
If the player is connected to the multi-channel
Audio Receiver by HDMI connection, set this option
to enjoy the multi-channel surround sound with
the 2-channel audio source.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
y
y This function is not available on an on-line
service.
y
y Only the audio source with less than 48
kHz sampling frequency is available for this
function.
y
y This function is availabe only when [HDMI]
option is set to [PCM Multi-Ch].
,
, Note
Page: 31
System Setting
32
System
Setting
3
[LOCK] Menu
To access any features in the [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create, or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1.	 Remove any disc that might be in the player.
2.	 Select [Password] option in the [Setup] menu.
3.	 Use Number buttons to enter“210499”. The
password is cleared.
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
,
, Note
DTV Lock
Allows you to set up specific programs and through
blocking schemes. Also allows you to activate or
disable all of the lock schemes previously set up.
A password is required to gain access to the lock
menu options. When the DTV Lock is set to [unlock].
(See“Setting the DTV Lock”on page 26.)
DTV Rating
You can set the rating to block out all the programs
with rating above a specified level. (See“Adjusting
DTV Rating”on pages 27.)
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Sets an age limit for BD-ROM playback. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
The [Blu-ray Disc rating] will be applied only for
the Blu-ray Disc that containing the Advanced
Rating Control.
,
, Note
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 65.
Page: 32
System Setting 33
System
Setting
3
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update feature and BD-LIVE.
Connection Setting
If your home network environment is ready to be
connected to the player, the player needs to be
set to the wired network connection for network
communication. (See“Connecting to your Home
Network”on pages 19-21.)
Connection Status
If you want to check the network status on this
player, select the [Connection Status] option and
press ENTER (b) to check whether a connection to
the network and the internet has been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BD-
LIVE contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-LIVE
contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
[OTHERS] Menu
Time Setting
The clock must be set in order to use timer
recording.
[Auto]
Select a programme that broadcasts a clock
signal and the clock will be set automatically. If
the time that has been automatically set is not
correct when compared your local time, you
can set additional time option.
[Manual]
If there is no channel that broadcasts a clock
signal in your area, you can set the time and
date manually. Use A/D to select each field,
and input correct time and date using W/S,
and press ENTER (b).
Blu-ray Storage Select
This player can store some BD-ROM disc related
information, including downloaded on-line content
such as movie trailers and special features into the
internal Flash Memory or an USB device.
[Built-In Storage]
Store the downloaded Blu-ray disc content on
the Internal Flash Memory.
[USB Storage]
Store the downloaded Blu-ray disc content on
the connected USB device.
Blu-ray Storage Clear
Removes the BD contents from the built-in storage
or the connected USB storage.
[Built-In Storage]
Delete all the downloaded contents from the
built-in storage.
[USB Storage]
Delete all the downloaded contents from the
connected USB storage.
If you select USB Storage, playback, copying
and recording on the USB device is disabled.
,
, Note
Page: 33
System Setting
34
System
Setting
3
DivX® VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LCC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
All the downloaded videos from DivX VOD
with this player’s registration code can only be
played back on this unit.
,
, Note
Initialize
[Factory Set]
You can reset the recorder to all its factory
settings. Some options cannot be reset (Rating
and Password). The [Factory Set] menu appears
on the screen after the factory settings.
y
y If you reset the unit to its original factory
settings using [Factory Set] option, you have
to set the network settings activation again.
y
y 	
The [Initialization] option is not available
while recording or [Lock] in the [Setup]
menu is set to [On].
y
y If you select [Factory Set] in the Setup
menu, All the channels will be deleted.
,
, Note
[Internal HDD Format]
Everything recorded on the HDD will be erased.
1.	 Press HOME.
2.	 Use W/S/A/D to select [Setup] in the
[Home] menu, and press ENTER (b).
3.	 Use W/S to select [OTHERS] option from the
[Setup] menu, and press ENTER (b).
4.	 Use W/S to select [Initialize], and press ENTER
(b) to display the sub-options.
5.	 Use W/S to select [Internal HDD Format], and
press ENTER (b).
Select [No] and press ENTER to cancel.
6.	 Use A/D to select [Yes], and press ENTER
(b) to start the HDD format. Select [OK] and
press ENTER (b) to return to the previous step.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see pages 68-69).
Auto Power Off
The screen saver appears when you leave the player
in Stop mode for about five minutes. If you set this
option to [On], the unit automatically turns itself off
after the Screen Saver is displayed for 25 minutes.
Set this option to [Off] to leave the screen saver
until the unit is operated by the user.
Page: 34
Operating 35
Operating
4
Using the Digital TV
functions
You can watch and record the digital TV
programmes or playback the recorded TV
programmes you want to watch using this unit.
Viewing the Digital TV
Viewing the Digital TV broadcasting on the TV
screen.
y
y DTV antenna connection is required. (page
14)
y
y DTV settings such as [Auto Tuning] in the
[Setup] menu may be required. (page 25)
,
, Note
1.	 Press 1 (POWER) to turn on the recorder.
2.	 Use A/D to select [DTV] on the HOME menu
and press ENTER (b).
Changing Digital TV
programmes
Generally, press PR (-/+) to select the programme
position, or entering a programme number using
numerical buttons. If you want to change the
programme on the program me list, follow the
instruction as below.
1.	 While watching DTV, press PR LIST.
2.	 Use W/S to select a desired programme, and
press ENTER (b).
	 Press red coloured button (R) to sort the
programmes into alphabetical order. Press green
coloured button (G) to sort the programmes
into FTA - CAS Press yellow colored (Y) button
to sort the programmes into number order.
3.	 Press BACK (1) to exit the programme list.
Setting favourite programmes
You can set the storage location where you want to
store the DTV recordings.
1.	 While watching DTV, press PR LIST.
2.	 Use W/S to select a programme you want to
add on the Favourite List.
3.	 Press blue coloured (B) button to display [Select
Favorite Group] menu.
4.	 Use W/S to select a group and press ENTER
(b) to add the programme on the selected
group.
5.	 On the Programme List menu, use A/D to
move to the Favorite List menu.
	 The mark appears for the favourite
programmes on the Favorite List.
	 To cancel the favourite programmes from the
Favorite List, select a programme with mark,
and press blue coloured (B) button.
Page: 35
Operating
36
Operating
4
Viewing the programme
information
You can view a description of the programme
being broadcast.
1.	 While watching DTV, press ENTER (b) to display
the programme information.
2.	 Press ENTER (b) or (BACK or EXIT) again to close
the programme information.
This function informs you of related
broadcasting information on current channel.
,
, Note
Selecting DTV audio language
Some digital programmes may broadcast several
audio languages or encoding methods. You can
select an audio languages or an encoding method
when it is available.
1.	 While watching DTV, press INFO/MENU (m).
2.	 Use A/D to select an audio language or an
encoding method, and press INFO/MENU (m).
Selecting DTV subtitle
language
Some digital programmes may broadcast several
subtitle languages. You can select a subtitle
language when it is available.
1.	 While watching DTV, press SUBTITLE.
2.	 Use A/D to select a subtitle language, and
press ENTER (b).
You can find a programme that supports
subtitle language on the programme
information.
For the programmes with subtitle, SUB icon
appears on the programme information.
,
, Note
Page: 36
Operating 37
Operating
4
Programme Guide (Digital
program only)
The Program Guide contains schedule and program
information for digital programs. They also provide
local over-the-air programs information including
conventional digital programs. Use the Program
Guide to find programs easily and conveniently
and to view schedule and descriptive program
information for the programs.
To Display the Program Guide
Press the GUIDE button on your remote control.
To Exit the Program Guide
Press the BACK (1) button to return to the last
program you tuned to.
To change guide menu
The guide screen provides two search menus. Press
blue colored (B) button when the Programme
Guide is displayed.
	 Now/Next: The screen shows now and next
programs.
	 8 Days: The screen shows programs within 8
days.
To navigate through programs on
the Guides
Use W/S/A/D on your remote control to
navigate the guide screen.
You can move faster through programs by scrolling
page-by-page with the PR (-/+) buttons on the
remote control. Each button stroke scrolls one page
up or down.
To tune to another current channel
Use W/S/A/D to select a current channel then
press ENTER (b). You can watch the channel.
To display the Full Information
window
You can view the detail information for the
highlighted program. Press INFO/MENU (m) to
display detail information window. To exit the detail
information window, press ENTER (b) again.
To change date
When the Program Guide with 8 days is displayed,
you can also change the date of the Program Guide
by pressing the green colour button then use A/
D to select a date.
After setting favorite channels from the PR list, you
can use the yellow button to toggle between [All]
and [Favorite] channel list.
Timer Recording with Program
Guide
You can set a timer record using program guide
with 8 days.
1.	 Display Program Guide with 8 days.
2.	 Select a program then press red colour (R)
button. The red timer icon will be displayed and
the program will be memorized by the recorder.
You can check the programming on the Timer
Record List menu (see page. 39-41).
3.	 To release the timer recording, select the
program then press red colour (R) button. The
red timer icon disappears.
Page: 37
Operating
38
Operating
4
Using the timeshift function
manually
You can pause a Live TV broadcast, then continue
watching the programme at a later time. This is
useful when you receive an unexpected call or
visitor while watching TV.
The following are operating steps when the
[Timeshift] option is set to [Manual].
1.	 Press TIME SHIFT while watching a TV broadcast.
The recorder starts recording the current TV
programme to the HDD.
2.	 Press M to pause the programme your’re
watching the just now.
3.	 Press d to resume watching the programme.
	 Press TIME SHIFT to display the progress of
timeshift.
	 Press C/V to move the starting point or
the ending point of timeshift.
	 Press c/v to playback of timeshift fast
forward or fast reverse.
4.	 Press Z to cancel the timeshift.
	 Timeshift cannot be saved as a recorded title.
Using the timeshift function
automatically
If you set the Timeshift option to [Auto], live TV
broadcast will automatically be recorded to the
HDD without pressing the TIME SHIFT button. The
timeshift will start automatically when the Digital
TV tuner mode is started.
Refer to“Setting the Timeshift”on page 27 to set
the [Timeshift] option.
1.	 Press 1 (POWER) to turn on the unit.
2.	 Use W/S/A/D to select [DTV] and press
ENTER (b).
The timeshift function will automatically start.
	 Press C/V to move the starting point or
the ending point of timeshift.
	 Press c/v to playback of timeshift fast
forward or fast reverse.
3.	 Press HOME (n) to exit from the DTV viewing.
4.	 Press Z, it’s not turning off the timeshift
function but going back to the DTV in realtime.
y
y Without changing a channel, the timeshift
function will go on.
y
y When you exit from the DTV mode,
Timeshift function automatically will be
stopped.
Ex) Home menu, Power off, Record etc.
y
y If you change the channel during the
timeshift function, the unit will switch to
Live TV automatically.
y
y If the timeshift data exceeds the capacity,
the date will be deleted automatically from
the oldest one.
y
y Timeshift doesn’t support Audio only
channel.
,
, Note
Using the teletext (Viewing
Teletext)
Many Digital TV programmes broadcast information
via their text service, and this recorder has access
to dedicated text programmes transmitted by the
broadcasters.
1.	 Press TEXT while watching Live TV.
2.	 Use coloured (R/G/Y/B) button to select a page.
	 You can also select a page by entering a three
digit number with the numerical buttons.
3.	 Press TEXT or EXIT to exit the teletext screen.
Additionally, you now have four coloured
buttons to navigate through the content of
the page. The use of these coloured buttons
will be displayed on the screen.
,
, Note
Page: 38
Operating 39
Operating
4
Recording TV
programmes
You can record Digital TV programmes and store
them on the HDD.
Normal Recording
1.	 Use PR (-/+) to select a programme you want to
record.
2.	 Press X REC to start recording.
Press M to pause recording, press M again to
resume recording.
3.	 Press Z to stop recording.
	 To stop recording, you must move to the
programme being recorded before pressing Z.
The TV screen turns black with stop mark
caused by no signal, Scramble, rating lock
recording is not available.
,
, Note
Timer Recording (Manual)
You can set the timer for a total of 32 programmes,
up to 22-28 days in advance.
1.	 While watching TV, press TIMER REC.
2.	 Use W/S/A/D to select the date to record,
and press ENTER (b).
3.	 Select an item using A/D and adjust it using
W/S. You can use numbered buttons to
change the setting.
The adjustable items are listed below.
Start time Sets the start time.
End time Sets the end time.
Channel Sets the programme position.
(If you want to display more
channels, press PR LIST)
Repeat Choose a desired repeat mode.
(Once, Daily, Weekly or Mon-Fri)
y
y The timer recording can be set from 3
minutes after the current time.
y
y Timer recording is not available on a USB
device.
,
, Note
4.	 Press ENTER (b).
5.	 Select [OK] then press ENTER (b).
	 If you input the wrong information, an error
message will appear and the timer recording
cannot be made.
Page: 39
Operating
40
Operating
4
Timer Recording (EPG)
You can also set the timer based on the information
provided by the EPG.
1.	 While watching TV, press GUIDE.
2.	 Use A/D to select date field, and select the
date of recording schedule using W/S.
3.	 Use A/D to select programme field, and set
the programme using W/S.
4.	 Use A/D to select the programme list, and
select a programme you want to record using
W/S.
5	 Press the red coloured (R) button.
	 For the successfully scheduled programme, a
red bullet mark appears.
	 A red bullet mark may not appear for inavailable
programme to record.
6.	 Press BACK (1) to return to the TV viewing.
7.	 Press TIMER REC, and check whether the
schedule is registered properly or not.
Canceling a timer recording
You can cancel a timer recording before the timer
recording actually starts.
1.	 While watching TV, press TIMER REC.
2.	 Press the red coloured (R) button.
3.	 Use W/S/A/D to select a schedule you
want to cancel.
4.	 Use W/S to select [Timer Record List], and
press the green coloured (G) button.
	 Select [No] and press ENTER (b) to cancel.
	 Select [Yes] and press ENTER (b) to delete
selected schedules (selected recording).
Editing a timer recording
You can edit a pre-scheduled timer recording
before the timer recording actually starts.
1.	 While watching TV, press TIMER REC.
2.	 Press the red coloured (R) button.
3.	 Press ENTER (b) to display the [Record setting]
menu.
4.	 Follow the steps 3-5 from“Timer Recording
(Manual)”on page 39 to complete the editing.
Page: 40
Operating 41
Operating
4
Instant Timer Recording
You can set the recording time instantly to stop the
recording automatically.
1.	 Use PR (-/+) to select a programme you want to
record.
2.	 Press X REC. to start recording.
3.	 While recording, press A/D repeatedly to set
the recording duration
4.	 Press ENTER (b).
5.	 Press Z to stop recording.
y
y The standard recording time is 3hours
(MAX=6hours). Depending on the
remaining capacity of HDD, the recording
time is somewhat flexible .
y
y 	
If the unit cannot catch the signal, the
recording will be pause, actual recording
time can be less than the time set on timer.
y
y You cannot record radio or blocked
channels.
y
y The quality of recording can be different on
the status of the broadcast signal.
y
y During the recording, turning off by force
can cause a serious problem on hard disk
drive.
,
, Note
General Playback
Playing Discs
1.	 Press B (OPEN/CLOSE), and place a disc on the
disc tray.
Insert a disc
2.	 Press B (OPEN/CLOSE) to close the disc tray.
For most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3.	 Press HOME (n).
4.	 Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
5.	 Select the [Disc] using W/S, and press ENTER
(b).
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to change
the device. (DISC, USB or HDD)
Page: 41
Operating
42
Operating
4
6.	 Select a file using W/S/A/D, and press d
(PLAY) or ENTER (b) to play the file.
y
y Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
y
y Depending on the BD-ROM titles, a USB
device connection may be needed for
proper playback.
,
, Note
To stop playback
Press Z (STOP) during playback.
To pause playback
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
To play frame-by-frame
Press M (PAUSE) while movie playback.
Press M (PAUSE) repeatedly to playback Frame-by-
Frame.
To scan forward or backward
Press c or v to play fast forward or fast reverse
during playback.
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
Using the disc menu
BD DVD AVCHD
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain a Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/D buttons to navigate through menu
items.
Resume playback
BD DVD AVCHD MOVIE ACD
MUSIC REC
This unit remembers the point where you pressed
the Z (STOP) depending on the disc.
If“ZM (Resume Stop)”appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,“Z
(Complete Stop)”appears on the screen. The unit
will clear the stopped point.
y
y The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
y
y On BD-Video discs with BD-J, the resume
playback function does not work.
y
y If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
,
, Note
Page: 42
Operating 43
Operating
4
Playing the recorded titles
REC
1.	 While watching TV, press REC LIST to display the
options menu or press REC LIST in Home menu.
2.	 Use W/S/A/D to select recording title.
3.	 Press d (PLAY) or ENTER (b) to play the
recording title.
y
y N mark is displayed in recorded files that
never once played since it was recorded.
,
, Note
Searching the recorded titles
REC
You can search for videos by entering search words
of up to 60 characters.
1.	 While watching TV or in Home, press REC LIST
to display the options menu.
2.	 Press yellow (Y) colored button.
3.	 Use W/S/A/D to select a character then
press ENTER (b) to confirm your selection on
the virtual keyboard.
To enter a letter with an accent mark, select the
letter from extended character set.
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters or
symbols.
To enter a letter with an accent mark:
1.	 Select a letter using W/S/A/D on the
keyboard menu.
2.	 Press INFO/MENU (m) to display the
extended character set.
3.	 character set. Use A/D to select a
character then press ENTER (b).
,
, Note
4.	 When you finish entering the search words,
	 Select [OK] and press ENTER (b) to display the
related videos list.
Sorting the recorded titles
REC
1.	 While watching TV, press REC LIST to display the
options menu.
2.	 Press blue coloured (B) button repeatedly to
sorted by recorded time in recent order or title
name in alphabetical order.
[ABC order] – by title name in alphabetical
order.
[Recent order] – sorted by recorded date.
Page: 43
Operating
44
Operating
4
Playing content contained in
the internal hard disk drive
1.	 Press HOME (n).
2.	 Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
3.	 Select the [HDD] option using W/S, and press
ENTER (b).
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to change
the device. (DISC, USB or HDD)
4.	 Select a file using W/S/A/D, and press
PLAY or ENTER (b) to play the file.
y
y The file requirements are described on page
10.
y
y You can use various playback functions.
Refer to pages 41-50.
y
y Recorded files are searchable only by
searching on the [REC. LIST].
,
, Note
Searching content in the hard
disk drive by entering file
name
If you are having difficulties finding content in the
hard disk drive, you can search for the content by
entering keyword with the virtual keyboard
1.	 On the [Movie], [Photo], [Music] or Home menu,
press yellow (Y) colored button to display the
virtual keyboard.
2.	 Use W/S/A/D to select letters then press
ENTER (b) to confirm your selection on the
virtual keyboard.
3.	 When you finish entering the keyword, select
[OK] and press ENTER (b) to display search
result.
4.	 Press A/D repeatedly until the search result
is selected, and use W/S to select a desired
content.
5.	 Press ENTER (b) to play the content.
Page: 44
Operating 45
Operating
4
Playing Blu-ray 3D disc
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
Preparation
In order to playback Blu-ray 3D title in stereoscopic
3D mode, you need to:
c
a b
d
a	Check if your TV is 3D capable and has HDMI
1.4 input(s).
b	 Wear 3D glasses to enjoy the 3D experience if
it is necessary.
If you want to purchase additional 3D-ready
glasses, contact the dealer that you purchased
the 3D-ready TV from.
c	check whether the BD-ROM title is the
Blu-ray 3D disc or not.
d	connect an HDMI cable (version 1.3 or higher)
between the player’s HDMI output and TV’s
HDMI input.
1.	 Press HOME (n), and set the [3D Mode] option
on the [Setup] menu to [On]
(page 29).
2.	 Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3.	 Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
The 3D icon appears on the screen when 3D
content is in playback.
4.	 Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
y
y Watching a 3D content for a long period
time may cause dizziness or tiredness.
y
y It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
y
y If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
>
>Caution
3D available Blu-ray 3D Discs
The“Blu-ray 3D”logo labeled BD-
ROM disc can be played on this
player with 3D mode output. If
your TV is not the
Blu-ray 3D-ready TV*, 2D mode
output is available.
The“Blu-ray 3D ONLY”logo labeled
BD-ROM disc can be played on
this player with 3D mode output.
The Blu-ray 3D ONLY disc playback
is not available, if your TV or player
are not the Blu-ray 3D-ready
device.
*	 3D-ready TV refers to TVs that are compliant with
“HDMI 1.4 3D mandatory format”standard.
The“Blu-ray 3D”and“Blu-ray 3D ONLY”may not
be printed on your BD-ROM disc, even if the
disc contains 3D contents.
,
, Note
Page: 45
Operating
46
Operating
4
Advanced Playback
Repeat Playback
BD DVD AVCHD ACD MUSIC
During playback, press REPEAT repeatedly to select
a desired repeat mode.
BDs/DVDs
A- – Selected portion will be repeated continually.
Chapter – The current chapter will be played
back repeatedly.
Title – The current title will be played back
repeatedly.
To return to normal playback, press REPEAT
repeatedly to select [Off].
Audio CDs/Music files
Track – The current track or file will be played
back repeatedly.
All – All the tracks or files will be played back
repeatedly.
– The tracks or files will be played back in
random order.
All – All the tracks or files will be played
back repeatedly in random order.
A-B – Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
y
y If you press V once during Repeat
Chapter/Track playback, the repeat playback
cancels.
y
y This function may not work on some disc or
title.
,
, Note
Repeating a specific portion
BD DVD AVCHD ACD
This player can repeat a portion you have selected.
1.	 During playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat.
2.	 Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
3.	 To return to normal playback, press REPEAT
repeatedly to select [Off].
y
y You cannot select a portion less than 3
seconds.
y
y This function may not work on some disc or
title.
,
, Note
Page: 46
Operating 47
Operating
4
Changing content list view
MOVIE MUSIC PHOTO REC
On the [Movie], [Music] or [Photo] menu, you can
change the content list view.
Method 1
Press red (R) coloured button repeatedly.
Method 2
1.	 On the content list, press INFO/MENU (m) to
display the option menu.
2.	 Use W/S to select the [View Change] option.
3.	 Press ENTER (b) to change the content list
view.
Viewing content information
MOVIE REC
The player can display the content information.
1.	 Select a file using W/S/A/D.
2.	 Press INFO/MENU (m) to display the option
menu.
3.	 Select the [Information] option using W/S,
and press ENTER (b).
	 The file information appears on the screen
	 During movie playback, you can display the file
information by pressing TITLE/POPUP.
The information displayed on the screen may
not be correct compared to the actual content
information.
,
, Note
Selecting a subtitle file
MOVIE
If the subtitle file name is different from the movie
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1.	 Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2.	 Press ENTER (b).
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the movie file.
y
y If you press Z (STOP) while playback, the
subtitle selection is cancelled.
,
, Note
Page: 47
Operating
48
Operating
4
Last Scene Memory
BD DVD
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
y
y Last Scene Memory function for a previous
disc is erased once a different disc is played.
y
y This function may not work depending on
the disc.
y
y On BD-ROM discs with BD-J, the last scene
memory function does not work.
y
y This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
,
, Note
On-Screen display
You can display and adjust various information and
settings concerning the content.
Displaying content information
on-screen
BD DVD AVCHD MOVIE REC
1.	 During playback, press INFO/MENU (m) to
show various playback information.
a Title – current title number/total number of
titles
b Chapter – current chapter number/total
number of chapters
c Time – elapsed playing time/total playback
time
d Audio – selected audio language or channel
e Subtitle – selected subtitle
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode
Page: 48
Operating 49
Operating
4
2.	 Select an option using W/S.
3.	 Use A/D to adjust the selected option value.
4.	 Press BACK (1) to exit the On-Screen display.
y
y If no button is pressed for a few seconds,
the on-screen display disappears.
y
y A title number cannot be selected on some
discs.
y
y Available items may differ depending on
discs or titles.
y
y If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
,
, Note
Playing from selected time
BD DVD AVCHD MOVIE REC
1.	 Press INFO/MENU (m) during playback. The
time search box shows the elapsed playing
time.
2.	 Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter“21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
3.	 Press ENTER (b) to start playback from selected
time.
y
y This function may not work on some disc or
titles.
,
, Note
Hearing different audio
BD DVD AVCHD MOVIE REC
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [Audio] option.
3.	 Use A/D to select desired audio language,
audio track or audio channel.
y
y Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
y
y Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y
y On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
,
, Note
Selecting a subtitle language
BD DVD AVCHD MOVIE REC
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [Subtitle] option.
3.	 Use A/D to select the desired subtitle
language.
4.	 Press BACK (1) to exit the On-Screen display.
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
,
, Note
Page: 49
Operating
50
Operating
4
Watching from a different
angle
BD DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [Angle] option.
3.	 Use A/D to select the desired angle.
4.	 Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
BD AVCHD MOVIE REC
You can change the TV aspect ratio setting during
playback.
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [TV Aspect Ratio]
option.
3.	 Use A/D to select desired option.
4.	 Press BACK (1) to exit the On-Screen display.
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is
not changed.
,
, Note
Changing the Picture Mode
BD DVD AVCHD MOVIE REC
You can change the [Picture mode] option during
playback.
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [Picture Mode] option.
3.	 Use A/D to select desired option.
4.	 Press BACK (1) to exit the On-Screen display.
Setting the [User setting] option
1.	 During playback, press INFO/MENU (m) to
display the On-Screen display.
2.	 Use W/S to select the [Picture Mode] option.
3.	 Use A/D to select the [User setting] option,
and press ENTER (b).
4.	 Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
(b) to reset the all video adjustments.
5.	 Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
Page: 50
Operating 51
Operating
4
Copying
Copying file(s)/folder(s) to the
internal hard disk drive
You can copy music, photo, video file(s)/folder(s)
from disc/USB storage device to the internal hard
disk drive.
1.	 Press HOME (n).
2.	 Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
3.	 Select the [Disc] or [USB] option using W/S,
and press ENTER (b).
4.	 Use W/S/A/D to select a directory that files
or folders you want to copy are located.
5.	 Press INFO/MENU (m) to display the option
menu.
6.	 Use W/S to select [Copy] option, and press
ENTER (b) to display the [Copy] menu.
7.	 Use W/S to select a file or a folder you wish to
copy on the menu, and press ENTER (b).
Repeat this step to select files and folders as many
as you can.
Select all the files and folders
on the current directory.
Shows all type of files on the
screen. (Movie, Photo and
Music)
Cancels the copying and
returns to the previous screen.
8.	 Use W/S/A/D to select [Start], and press
ENTER (b).
9.	 Use W/S/A/D to select the destination
folder to be copied.
10.	 (Option)
If you want to create a new folder, use W/S/
A/D to select [New Folder] and press ENTER
(b).
Enter folder name using virtual keyboard, and
press ENTER (b) while [OK] is selected.

Question & answers

There are no questions about the LG HR825T yet.

Ask a question about the LG HR825T

Have a question about the LG HR825T but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the LG HR825T. Please make sure that you describe your difficulty with the LG HR825T as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.