5big Network 2

LaCie 5big Network 2 manual

5big Network 2

User manual for the LaCie 5big Network 2 in English. This PDF manual has 65 pages.

Table of contents

Page: 1
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Table of Contents User Manual page 1 Table of Contents 1. Introduction................................................................................................................. 6 1.1. Minimum System Requirements....................................................................................................... 7 1.1.1. Windows users.................................................................................................................. 7 1.1.2. Mac Users........................................................................................................................ 7 1.1.3. Linux Users....................................................................................................................... 7 1.2. Box Content.................................................................................................................................. 8 1.3. Views of the Drive.......................................................................................................................... 9 1.3.1. Front View........................................................................................................................ 9 1.3.2. Rear View......................................................................................................................... 9 1.3.3. LED Behavior.................................................................................................................. 10 2. Connecting to a Network........................................................................................... 11 2.1. STEP 1: Connect the Power Supply................................................................................................ 12 2.2. STEP 2: Connect the Ethernet Cable.............................................................................................. 13 2.3. STEP 3: Connect using LaCie Network Assistant............................................................................. 14 2.4. STEP 4: Completing the Setup Wizard........................................................................................... 16 2.5. Power Button Functions................................................................................................................ 17 2.6. Assigning a Static IP Address. ........................................................................................................ 18 3. Accessing and Transferring Files................................................................................ 19 3.1. About Default Shares................................................................................................................... 19 3.2. Accessing Shares Using LaCie Network Assistant............................................................................ 20 3.2.1. Switching User................................................................................................................ 22 3.2.2. Map Shares.................................................................................................................... 23 3.3. Accessing Shares Using File Browser. ............................................................................................. 24 3.3.1. About the File Browser..................................................................................................... 24 3.4. Accessing Shares via FTP.............................................................................................................. 25 3.5. Accessing Shares through the Internet............................................................................................ 26 3.6. Multimedia Server........................................................................................................................ 27 3.7. iTunes Music Server..................................................................................................................... 28 3.8. About iSCSIShare. ........................................................................................................................ 29 3.8.1. iSCSIShare: Advanced..................................................................................................... 29 4. Administering Your LaCie 5big Network 2................................................................. 30 4.1. Dashboard: Accessing. ................................................................................................................. 31 4.2. Dashboard: Welcome Page.......................................................................................................... 32 4.3. Dashboard: Navigation................................................................................................................ 32 4.4. Dashboard: Logging Out............................................................................................................. 32 4.5. Dashboard: Restart/Shutdown. ...................................................................................................... 32 4.6. Dashboard: General Settings........................................................................................................ 33 4.6.1. Active Directory............................................................................................................... 34 4.7. Dashboard: Users........................................................................................................................ 35 4.7.1. Adding a New User......................................................................................................... 35 4.7.2. Deleting a User............................................................................................................... 36 4.7.3. Editing a User................................................................................................................. 36 4.8. Dashboard: Groups..................................................................................................................... 37 4.8.1. Adding New Group......................................................................................................... 37 4.8.2. Editing a Group.............................................................................................................. 37 4.8.3. Deleting a Group............................................................................................................ 38 4.8.4. Adding/Removing Users from a Group. ............................................................................. 38 4.9. Dashboard: Shares...................................................................................................................... 39
Page: 2
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Table of Contents User Manual page 2 4.9.1. Adding a New Share. ....................................................................................................... 39 4.9.2. Modifying a Share........................................................................................................... 39 4.9.3. Deleting a Share............................................................................................................. 39 4.9.4. Setting/Modifying Access Rights for Users/Groups.............................................................. 40 4.9.5. About Access Rights......................................................................................................... 40 4.9.6. Specify Share-Level Access Protocols................................................................................. 40 4.10. Dashboard: Network. ................................................................................................................... 41 4.10.1. Standard Settings. ............................................................................................................ 41 4.10.2. Advanced Settings........................................................................................................... 42 4.11. Dashboard: Drive Information. ...................................................................................................... 43 4.11.1. Formatting Your 5big Network 2. ...................................................................................... 43 4.12. Dashboard: Eco Management...................................................................................................... 44 4.12.1. UPS Management........................................................................................................... 45 4.12.2. Wake on LAN................................................................................................................. 46 4.13. Dashboard: Support. .................................................................................................................... 47 4.13.1. Email Notification Events.................................................................................................. 48 4.14. Dashboard: Download................................................................................................................. 49 4.14.1. Download Page Settings.................................................................................................. 49 4.15. Dashboard: Copy........................................................................................................................ 50 4.15.1. Creating a Backup Job.................................................................................................... 50 4.16. Dashboard: External Ports............................................................................................................ 51 4.16.1. Connecting an External Hard Drive................................................................................... 52 4.17. Dashboard: RAID. ........................................................................................................................ 53 4.17.1. Modify RAID Mode.......................................................................................................... 53 4.17.2. About RAID Modes.......................................................................................................... 54 4.17.3. Installing a New Disk....................................................................................................... 56 4.18. Update Product Software.............................................................................................................. 57 4.18.1. Method 1: Auto-Update................................................................................................... 57 4.18.2. Method 2: Update with LaCie Network Assistant Software................................................... 58 4.19. Reset to Factory........................................................................................................................... 59 5. Troubleshooting......................................................................................................... 60 5.1. System Log.................................................................................................................................. 60 5.2. Manual Updates.......................................................................................................................... 60 5.3. Troubleshooting the Network Connection...................................................................................... 61 6. Contacting Customer Support.................................................................................... 63 6.1. LaCie Technical Support Contacts................................................................................................. 64 7. Warranty Information................................................................................................ 65
Page: 3
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Foreword User Manual page 3 Copyrights Copyright © 2009 LaCie. All rights re- served. No part of this publication may be reproduced, stored in a retrieval sys- tem, or transmitted in any form or by any means, electronic, mechanical, photo- copying, recording or otherwise, without the prior written consent of LaCie. Licences and free software The LaCie 5big Network 2 ships with copyrighted software that are licensed un- der the GPL, AFL, Apache, Apple, BSD, GNU LGPL, MIT, OpenLDAP, OpenSSL, PHP, Python, and Creative Common. It also includes free software, the source code for which can be downloaded from the LaCie website: www.lacie.com/sup- port/ © 2007-2008, Thomas BERNARD. © 2006 Allan Saddi allan@saddi.com © 2004, Jan Kneschke, incremental. © 2001-2006, Patrick K. O’Brien and Contributors. © 2003-2009 Stuart Bishop stuart@stu- artbishop.net. © 2006 Kirill Simonov. © 1996-2006 Julian R Seward. © 2004, 2005 Darren Tucker. All rights reserved. © 1997-2008 University of Cambridge. All rights reserved. © 2007-2008, Google Inc. All rights re- served. © 1990-2003 Sleepycat Software. All rights reserved. © 1995-2004 Jean-loup Gailly and Mark Adler. © 2004 Micah Dowty. ® 1997-2006 by Secret Labs AB ® 1995-2006 by Fredrik Lundh. © 1988,1990,1993,1994 by Paul Vixie. © 2007-2009 Charles du Jeu. This list of licenses can evolve over time and can be found on the user interface under the heading “Credits.” Trademarks Apple, Mac, Time Machine, and Macin- tosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows XP, Windows Vista, and Windows 7 are reg- istered trademarks of Microsoft Corpora- tion. Other trademarks mentioned in this manual are the property of their respective owners. Changes The material in this document is for in- formation only and subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LaCie assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. LaCie reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes. Canada Compliance Statement This Class A digital apparatus meets all requirements of the Canadian Interfer- ence-Causing Equipment Regulations. ROHS Compliance This product is ROHS compliant (Europe- an Directive 2002/95/EC on the Restric- tion of Hazardous Substances). Manufacturer’s Declaration for CE Certification We, LaCie, solemnly declare that this product conforms to the following Eu- ropean standards: Class B EN60950, EN55022, EN50082-1, EN61000-3-2 With reference to the following condi- tions: 73/23/EEC Low Voltage Directive; 89/336/EEC EMC Directive FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency en- ergy and, if not installed and used in ac- cordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the inter- ference by one or more of the following measures: ✦ ✦ Reorient or relocate the receiving antenna. ✦ ✦ Increase the separation between the equipment and receiver. ✦ ✦ Connect the equipment into an out- let on a circuit different from that to which the receiver is connected. ✦ ✦ Consult the dealer or an experi- enced radio/TV technician for help. ✦ ✦ Modifications to this product not authorized by LaCie could void the FCC & Industry Canada regulations and negate your authority to oper- ate the product. Tested to comply with FCC standards for home or office use LaCie 5big Network 2 100202 v1.1
Page: 4
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Foreword User Manual page 4 This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designed collection point for the recycling of waste electrical and electronic equip- ment. The separate collection and recy- cling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product. Health and Safety Precautions ✦ ✦ Only qualified persons are autho- rized to carry out maintenance on this device. ✦ ✦ Read this User Manual carefully and follow the correct procedure when setting up the device. ✦ ✦ Do not open your LaCie 5big Net- work 2 or attempt to disassemble or modify it. Never insert any metallic object into the drive to avoid any risk of electrical shock, fire, short- circuiting or dangerous emissions. Your LaCie 5big Network 2 con- tains no user-serviceable parts. If it appears to be malfunctioning, have it inspected by a qualified LaCie Technical Support representative. ✦ ✦ Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing liquids on the LaCie 5big Network 2, as they may spill into its openings. Doing so increases the risk of electrical shock, short-circuit- ing, fire, or personal injury. ✦ ✦ Power requirements 100-240 V~, 0.9 A, 50-60 Hz, (Supply voltage fluctuations not exceeding ± 10% of the nominal, transient over- voltages according to over-voltage category II). General Use Precautions ✦ ✦ Do not expose the LaCie 5big Net- work 2 to temperatures outside the range of 5° C to 35° C (41° F to 95° F); or to operational humidity beyond 5-80%, non-condensing, or non-operating humidity beyond 10- 90%, non-condensing. Doing so may damage the LaCie 5big Net- work 2 or disfigure its casing. Avoid placing your LaCie 5big Network 2 near a source of heat or exposing it to sunlight (even through a win- dow). Inversely, placing your LaCie 5big Network 2 in an environment that is too cold or humid may dam- age the unit. Because of heat is- sues, LaCie recommends that users do not stack multiple 5big Network 2 together. ✦ ✦ Always unplug the LaCie 5big Net- work 2 from the electrical outlet if there is a risk of lightning or if it will be unused for an extended period of time. Otherwise, there is an in- creased risk of electrical shock, short-circuiting or fire. ✦ ✦ Use only the power supply shipped with the device. ✦ ✦ Do not use the LaCie 5big Network 2 near other electrical appliances such as televisions or radios. Doing so may cause interference which will adversely affect the operation of the other products. ✦ ✦ Do not place the LaCie 5big Net- work 2 near sources of magnetic interference, such as computer displays, televisions or speak- ers. Magnetic interference can affect the operation and stabil- ity of your LaCie 5big Network 2. Do not place heavy objects on top of the LaCie 5big Network 2. ✦ ✦ Never use excessive force on your LaCie 5big Network 2. If you detect a problem, see the Troubleshooting section in this manual. IMPORTANT INFO: Any loss, corrup- tion or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no circumstances will LaCie be held liable for the recovery or restoration of this data. To help prevent the loss of your data, LaCie highly recom- mends that you keep TWO copies of your data; one copy on your external hard disk, for instance, and a second copy either on your internal hard disk, another external hard disk or some other form of remov- able storage media. LaCie offers a com- plete line of CD and DVD drives. If you would like more information on backup, please refer to our website.
Page: 5
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Foreword User Manual page 5 MPORTANT INFO: 1GB = 1,000,000,000 bytes. 1TB = 1,000,000,000,000 bytes. Once format- ted, the actual available storage capacity varies depending on operating environ- ment (typically 10% less). IMPORTANT INFO: Some enhance- ments brought to the product during its lifetime may cause discrepancies between the information and screenshots in the manual and the actual user experience. CAUTION: Modifications not authorized by the manufacturer may void the user’s authority to operate this device. CAUTION: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used.
Page: 6
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Introduction User Manual page 6 1. Introduction Congratulations on your purchase of a LaCie 5big Network 2. De- signed to satisfy the data sharing and backup needs of small offices, the LaCie 5big Network 2 represents the new generation of shared storage with security. To navigate this manual, use the PDF bookmarks or consult the table of contents. For quick access to important sections, see the Quick Links box below. Quick Links Click a topic: ✦ ✦ Connecting to a Network ✦ ✦ Accessing and Transferring Files ✦ ✦ Administering Your LaCie 5big Network 2
Page: 7
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Introduction User Manual page 7 1.1. Minimum System Requirements 1.1.1. Windows users ✦ ✦ Computer with an Ethernet network adapter ✦ ✦ Windows XP, Windows Vista, or Windows 7 ✦ ✦ Minimum free disk space: 600MB recommended ✦ ✦ Web browsers: Internet Explorer 7.0, Firefox 3.0, Safari 3.0, or Chrome 2.0 or higher 1.1.2. Mac Users ✦ ✦ Computer with an Ethernet network adapter ✦ ✦ Mac OS X 10.4, 10.5, and 10.6 ✦ ✦ Minimum free disk space: 600MB recommended ✦ ✦ Web browsers: Internet Explorer 7.0, Firefox 3.0, Safari 3.0, or Chrome 2.0 or higher 1.1.3. Linux Users ✦ ✦ Computer with an Ethernet network adapter ✦ ✦ Linux 2.6 or later ✦ ✦ Minimum free disk space: 600MB recommended ✦ ✦ Web browsers: Internet Explorer 7.0, Firefox 3.0, Safari 3.0, or Chrome 2.0 or higher IMPORTANT INFO: The LaCie 5big Network 2’s performance can be affected by such external forces as network activity, hard- ware, distance, and setup. IMPORTANT INFO: For optimal performance, use a Gigabit Eth- ernet router and a Gigabit Ethernet board in your host computer.
Page: 8
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Introduction User Manual page 8 1.2. Box Content 1. LaCie 5big Network 2 2. Ethernet cable 3. External power supply 4. Disk drawer key 5. Utilities CD-ROM with software and User Manual 6. Quick Install Guide IMPORTANT INFO: Please save your packaging. In the event that the drive should need to be repaired or serviced, it must be returned in its original packaging. G^mphkd?Zfber Quick Install Guide 5big Network 2 Gigabit Ethernet 5-bay RAID Server DESIGN BY NEIL POULTON
Page: 9
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Introduction User Manual page 9 DESIGNED BY NEIL POULTON 1.3. Views of the Drive 1.3.1. Front View Button and Activity LED: The blue button stays on to show disk activ- ity (unless you turn it off using the Dashboard, the user interface) and can also be configured to put it to sleep or wake it from sleep. For details, see 2.5. Power Button Functions and 4.12. Dashboard: Eco Management. 1.3.2. Rear View 1. 2x USB 2.0 Expansion port 2. On/Off 3. 2x Gigabit Ethernet 4. Drive status LED 5. Drive tray handle 6. Drive lock 7. Power Connector 8. 2x eSATA Expansion port Fig. 01 Fig. 02
Page: 10
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Introduction User Manual page 10 1.3.3. LED Behavior The front and rear LED indicate drive status and activity. This section describes the behavior of the LED indicators. TECHNICAL NOTE: Even if you have turned off the front LED using the Dashboard (4.12. Dashboard: Eco Management), events triggering a red light will always cause the front LED to turn on. Front LED Color Rear LED Color 2big Network 2 State Blinking blue Activity LED for working disk(s) (until they are fully initialized) Occurs as the 5big is booting; will cease once the drives are fully initial- ized RAID synchronizing; will cease once operation has concluded Solid blue Activity LED for working disk(s) Drive working (read/write) Blinking blue/red Activity LED for working disk(s) RAID is degraded; data is intact but no longer protected from further failed disks Solid red in non-functional disk(s) Blinking red Activity LED for working disk(s) Power supply has been cut but power is still being supplied through the UPS Temperature alert (first level) Solid red Activity LED for working disk(s) Temperature alert (critic level) – the product will shut off Activity LED for working disk(s) Power supply has been cut and the UPS has run out of reserve power – the product will shut off Solid red in non-functional disk(s) RAID has failed and data has been lost
Page: 11
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 11 This chapter explains how to connect your hard drive to the network. Follow these steps to getting your LaCie 5big Network 2 connected to your network: 2.1. STEP 1: Connect the Power Supply 2.2. STEP 2: Connect the Ethernet Cable 2.3. STEP 3: Connect using LaCie Network Assistant 2.4. STEP 4: Completing the Setup Wizard 2. Connecting to a Network
Page: 12
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 12 2.1. STEP 1: Connect the Power Supply 1. Connect the power supply to a wall outlet and to the LaCie 5big Network 2 (Fig. 03). Now move on to step 2, section 2.2. STEP 2: Connect the Ethernet Cable. CAUTION: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from another LaCie device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty. TECHNICAL NOTE: You may use your LaCie drive when in a for- eign country thanks to its 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapt- er other than one authorized by LaCie will void your warranty. Fig. 03
Page: 13
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 13 2.2. STEP 2: Connect the Ethernet Cable 1. Connect the Ethernet cable to the Ethernet port on the back of the LaCie 5big Network 2 (Fig. 04). 2. Connect the other end of the Ethernet cable into an available Ethernet “out” port on your router or hub (refer to your router or hub’s documentation if necessary). 3. Turn on the drive by pressing the power button on the back of the drive (Fig. 05). The front LED will turn on and then begin blinking. The drive is ready to be accessed once the blue LED has stopped blinking. The product may take up to 3 minutes to boot. Now move on to step 3, section 2.3. STEP 3: Connect using LaCie Network Assistant. TECHNICAL NOTE: Depending on your computer’s Ethernet set- tings, you may be able to connect the 5big Network 2 directly to your computer using the Ethernet cable. Gigabit Ethernet Cables And Connectors See Fig. 06 for an illustration of the Ethernet cable used to connect your LaCie 5big Network 2 to your network device. The ends of the Ethernet cable are the same and either end can be connected to the LaCie 5big Network 2 or your router. Fig. 05 Fig. 06 - Gigabit Ethernet cable ends Fig. 04
Page: 14
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 14 2.3. STEP 3: Connect using LaCie Network Assistant LaCie Network Assistant software detects all LaCie network-attached storage devices on your network and gives you easy ways to connect to or configure them. Once installed and running, Network Assistant will appear in your task bar (Windows users, Fig. 08) or in the menu bar (Mac users, Fig. 09) and automatically search for storage devices on your net- work. When a new device is found, the icon will blink. When Network Assistant finds your LaCie 5big Network 2, you can connect to any of its shares, log in to the Dashboard (user interface, see 4.1. Dashboard: Accessing), or configure its network settings. TECHNICAL NOTE: If you’ve installed LNA before purchasing the 5big Network 2, make sure that you download and install the latest version from the LaCie website. TECHNICAL NOTE: If you can’t do don’t want to install LNA, you can still access the Dashboard by typing http://LaCie-5big (Win- dows), http://lacie-5big.local (Mac), or http://[IP address] (either). Install LaCie Network Assistant: 1. Insert the LaCie 5big Network 2 CD-ROM into your computer’s CD-ROM drive. 2. Windows users, the CD should appear in My Computer. Mac users, the CD should appear on the desktop. Double-click the CD icon, then double-click “LaCie Network Assistant Setup”. 3. Follow the Wizard to complete installation. continued on next page >> Fig. 07 Fig. 08 Fig. 09
Page: 15
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 15 Connect to the LaCie 5big Network 2: 1. Launch LaCie Network Assistant and use it to open the Dash- board (administration page). Windows Users Select LaCie Network Assistant in Start/Programs. A Net- work Assistant icon will appear in the system tray (Fig. 10) and Network Assistant will automatically detect your LaCie 5big Network 2 and any other storage devices on your net- work (Fig. 11). Mac Users Select LaCie Network Assistant in your Applications folder. A Network Assistant icon will appear in the menu bar and the Assistant will automatically detect your LaCie 5big Net- work 2 and any other LaCie storage devices on your net- work. 2. Click on the icon in the system tray (Windows) or menu bar (Mac) and select LaCie-5big (Fig. 12). The Dashboard will open in your default web browser. 3. If this is the first time you’ve connected to the Dashboard, pro- ceed to the next step, 2.4. STEP 4: Completing the Setup Wiz- ard. For subsequent logins, refer to section 4.1. Dashboard: Accessing. Fig. 10 Fig. 11 Fig. 12
Page: 16
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 16 2.4. STEP 4: Completing the Setup Wizard The first time you log in to the Dashboard, the Setup Wizard will load in you browser (Fig. 13). The Setup Wizard consists of two sections to be filled out that will help you to configure your 5big Network 2. a. General Settings: Modify the Machine Name (optional - a name may only contain letters (case sensitive), numbers, or a hyphen. Maximum of 15 characters) and create the admin login name and password (minimum 4 characters). IMPORTANT INFO: You may enter 4 to 20 characters using let- ters (case sensitive), numbers, the hyphen, and the underscore. No other symbols, punctuation, or spaces may be used. Do not begin or end with a hyphen and/or an underscore. IMPORTANT INFO: If for whatever reason you do not complete the Setup Wizard, the default login credentials will be admin/admin. b. Time Configuration: Select whether the time and date should be set manually or synchronized with a third party server. Press the Test button to ensure synchronization is working. When the time synchronization option is selected, you can’t modify the time and date settings. Once you’ve finished, you can proceed to the Dashboard by clicking Finish (Fig. 13). Your 5big Network 2 is configured and ready to use. Proceed to the following sections: 3. Accessing and Transferring Files and 4. Administering Your LaCie 5big Network 2. Fig. 13 NOTE: The machine name can be modified later from the Dash- board. NOTE: You can also change the language on this page (Fig. 13, c). TECHNICAL NOTE: If you need to assign a static IP address, refer to section 2.6. Assigning a Static IP Address for details.
Page: 17
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 17 2.5. Power Button Functions The multi-function front LED/button allows you to activate/deacti- vate sleep mode and reset to default. ✦ ✦ Activate sleep mode: This mode can be triggered by either: a. If Deep Sleep Mode is enabled in Dashboard > Eco Man- agement, by clicking and holding the blue button. b. Alternatively, if Deep Sleep Mode is enabled in Dashboard > Eco Management, by clicking the Shut Down button in the upper-right hand corner of the Dashboard then Deep Sleep Mode (Fig. 14). ✦ ✦ Wake from sleep mode: Press the blue button (but do not hold it down). To wake the drive from Deep Sleep Mode, press the blue but- ton or use the Wake on LAN function in the LaCie Network As- sistant (see 4.12.2. Wake on LAN) (see 4.12. Dashboard: Eco Management). ✦ ✦ Reset to default: This process is explain in section 4.19. Reset to Factory. Fig. 14
Page: 18
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Connecting to a Network User Manual page 18 2.6. Assigning a Static IP Address Most networking routers are DHCP servers, meaning that the router will automatically assign the 5big Network 2 an IP address. If the network is not DHCP-managed, the 5big Network 2 will use APIPA to assign itself a valid IP address of existing network; in some cases it will assign itself an IP address following the rule 169.254.xxx.yyy/24. TECHNICAL NOTE: Make sure you provide an IP address on the same subnet as your computer so that the 5big Network 2 will be visible to that computer. If your network requires devices to be assigned a static IP, follow these steps to use the LaCie Network Assistant: 1. Make sure the LNA is installed on your computer (see section 2.3. STEP 3: Connect using LaCie Network Assistant for details). 2. Launch LaCie Network Assistant and open the Network settings tab: Windows Users Select LaCie Network Assistant in Start/Programs. An Net- work Assistant icon will appear in the system tray and Net- work Assistant will automatically detect your LaCie 5big Network 2 and any other storage devices on your network. Mac Users Select LaCie Network Assistant in your Applications folder. An Network Assistant icon will appear in the menu bar and the Assistant will automatically detect your LaCie 5big Net- work 2 and any other LaCie storage devices on your net- work. 3. Click on the icon in the system tray (Windows) (Fig. 15) or menu bar (Mac) (Fig. 16) and select Configuration Window.... 4. Click the Network tab and select Manual. 5. Modify the network settings to work with your network. 6. Click Apply. Fig. 15 Fig. 16
Page: 19
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 19 There are several ways to access and transfer files located on the 5big Network 2. Follow the links below for more details. 3.2. Accessing Shares Using LaCie Network Assistant 3.3. Accessing Shares Using File Browser 3.4. Accessing Shares via FTP 3.5. Accessing Shares through the Internet 3.6. Multimedia Server 3.1. About Default Shares The LaCie 5big Network 2 has three shares (similar to folders) by default: Share and Public. The following table sums up the differ- ences between them: Name Accessibility Login Availability Share Private, accessible only to admin by default Password-protected When connected to the network (Ethernet) and to networked computers Public Public, accessible to any user on the network None When connected to the network (Ethernet) and to networked computers or UPnP/DLNA-certified players/adapters (if UPnP service is activated) Thus, when the 5big Network 2 is connected to the network via Ethernet, both shares are accessible to the administrator, and Public to guests. It is also possible to create new shares and/or to delete the default shares. See section 4.9. Dashboard: Shares for details. 3. Accessing and Transferring Files
Page: 20
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 20 3.2. Accessing Shares Using LaCie Network Assistant When your computer is connected to your local area network, LaCie Network Assistant will help you quickly connect to the shared fold- ers (Share, Public, or any user share) on your LaCie 5big Network 2 and, if you like, make those folders immediately available every time you log on to your computer (for this procedure, see section 3.2.2. Map Shares). By default, you will be logged in as a guest, and will not therefore have access to any private shares you have created. In order to ac- cess protected shares, you will have to change the login credentials using the LaCie Network Assistant. For this process, see section 3.2.1. Switching User. To access shared folders: 1. Launch LaCie Network Assistant. Windows Users Select LaCie Network Assistant in Start/Programs. A Network Assistant icon will appear in the system tray (Fig. 17) and Net- work Assistant will automatically detect your LaCie 5big Network 2 and any other storage devices on your network (Fig. 18). Mac Users Select LaCie Network Assistant in your Applications folder. An Network Assistant icon will appear in the menu bar and the As- sistant will automatically detect your LaCie 5big Network 2 and any other LaCie storage devices on your network.. 2. Click on the icon in the system tray (Windows) or menu bar (Mac) and select a share from the LaCie 5big Network 2 sub- menu (Fig. 19). TECHNICAL NOTE: By default, you will be logged in as a guest and will therefore only have access to public shares. To access pri- vate shares using LaCie Network Assistant, see 3.2.1. Switching User. continued on the next page >> Fig. 17 Fig. 18 Fig. 19
Page: 21
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 21 3. You will be logged on as a guest and the share will open in a Finder window (Mac) or an Explorer window (PC). TECHNICAL NOTE: Mac users: If the share does not open in a Finder window, simply navigate in the Finder to Network > LaCie- 5big > [Share name]. 4. Transfer files normally from your computer to the 5big Network 2 share. IMPORTANT INFO: If you wish to copy large amounts of data from the USBShare to another share, LaCie recommends you use the File Browser (3.3. Accessing Shares Using File Browser) instead of drag-and-drop using SMB.
Page: 22
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 22 3.2.1. Switching User By default, you will be logged in as a guest, and will not therefore have access to private shares. In order to access protected shares, you will have to change the login credentials using the LaCie Net- work Assistant. Follow these steps: 1. Click the LaCie Network Assistant icon in the Task Bar (Win- dows) or Menu Bar (Mac) and select Configuration Window.... 2. Click on the Volumes tab and then click the authentication but- ton (Fig. 20). 3. When prompted, enter you username and password (Fig. 21). 4. Click OK. Now when you click the LNA icon, you should see a listing of shares accessible to the authenticated user. NOTE: The admin name and password can be changed from the Dashboard > Home page. Fig. 20 Fig. 21
Page: 23
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 23 3.2.2. Map Shares If you would like a shortcut to accessing 5big Network 2 shares, follow this procedure: TECHNICAL NOTE: Windows users: Once you log in to a private (password-protected) share, you must log out in order to access an- other private share. For this reason, it is recommended for Windows users to map private shares before mapping public ones so that you won’t need to log out each time. Windows Users 1. In an Explorer window, in the menu bar, select Tools and then Map Network Drive (Fig. 22). 2. Select Share. 3. Repeat process for other shares. 4. You will then have access to your share from an Explorer window. Mac Users 1. From the Apple icon in the menu bar, select System Prefer- ences > Accounts > Login Items. 2. Drag the share’s icon from your desktop into the list of ap- plications (Fig. 23). 3. When you log on to the Mac OS, the share(s) will automati- cally mount on your desktop. Alternatively, you can drag the share icon to the Dock for easy access. Fig. 22 Fig. 23
Page: 24
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 24 3.3. Accessing Shares Using File Browser The Dashboard features an interactive file browser that allows you to manage and transfer files via HTTP protocol. Follow these steps to open the file browser: 1. Log in to the Dashboard (see section 4.1. Dashboard: Accessing for details). 2. Click the File Browser button (Fig. 24). 3.3.1. About the File Browser The File Browser allows you to transfer, copy and delete files, as well as view photos in thumbnails and even stream multimedia content such as mp3 or flv videos. It is thus a convenient way to interact with files stored on the 5big Network 2’s shares, whether the connection be through the local network or through the internet. For details on remote connections, see 3.5. Accessing Shares through the Internet. The File Browser is composed of five parts (Fig. 25): 1. Tool bar allows you to perform a range of functions, such as changing the way files are displayed and uploading files to the 5big Network 2 from your computer. 2. NAS selection lets you choose the product you wish to access. 3. Share folders shows the folder structure on the selected share. 4. File info displays information on a selected file, such as name, file type, dimensions (photos), or duration (videos). 5. Folder contents displays the files contained in a selected fold- er. To view the files as thumbnails, click Thumbs in the Tool bar. Fig. 24 Fig. 25
Page: 25
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 25 3.4. Accessing Shares via FTP The FTP protocol is used to transfer files from one computer to an- other through a local network or over the internet. This protocol allows you to exchange files with your friends or relatives securely, as only people with a user account will have access. IMPORTANT NOTE: The FTP service is enabled by default for new shares, but if you have disabled the service at the global or share level, enable the service as described in sections 4.6. Dashboard: General Settings and 4.9. Dashboard: Shares. To connect to the 5big Network 2 via FTP locally on the LAN, enter in your browser’s or FTP client’s address field: ftp://[IP address] TECHNICAL NOTE: See section 2.6. Assigning a Static IP Address for instructions on finding your 5big Network 2’s IP address. Example: ftp://192.168.10.149 OR ftp://<username>:<password>@<ip or machine name>/ Example: ftp://ringo:4xtp23@LaCie-5big/ To login, enter the username and password you’ve set up in the Dashboard (4.7. Dashboard: Users) or the Setup Wizard. To remotely access the drive from a computer NOT on your net- work, refer to 3.5. Accessing Shares through the Internet. Fig. 26
Page: 26
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 26 3.5. Accessing Shares through the Internet You can access your 5big Network 2 through the internet. For in- formation on establishing the connection, see 4.10. Dashboard: Network. Once connected, it is easiest to access your files using the web browser-based File Browser. You can upload, download, and stream most types of multimedia files such as mp3 and flv. For more information on the File Browser, see 3.3. Accessing Shares Using File Browser.
Page: 27
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 27 3.6. Multimedia Server Once you have established the network connection between your computer and the 5big Network 2, you can configure your 5big Network 2 to act as a UPnP multimedia server. Follow these steps: 1. Make sure the 5big Network 2 is properly connected to your home network as described in section 2. Connecting to a Net- work. 2. Choose which share(s) will be available to DLNA/UPnP devices, then enable UPnP for that share on the 5big Network 2 Dash- board (see section 4.6. Dashboard: General Settings) (Fig. 27). 3. Now you will be able to play files located on public shares on your 5big Network 2 on any other UPnP/DLNA-certified player/ adapter (such as an XBox 360, Play Station 3, a DLNA mobile phone, etc.). TECHNICAL NOTE: If you want your DLNA devices to be able to access files on your external USB hard drive connected to the expan- sion port on the 5big Network 2, select Multimedia Indexation on the Dashboard: External Ports page. Fig. 27
Page: 28
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 28 3.7. iTunes Music Server The 5big Network 2 can act as an iTunes Music server, streaming audio files located on unprotected shares to a computer on the net- work running iTunes. Once configured, a playlist bearing the ma- chine name of your 5big Network 2 (by default LaCie-5big) will ap- pear in the Shared category within iTunes, and audio files stored on the 5big Network 2 will be listed in this playlist. Follow these steps: 1. Make sure the 5big Network 2 is properly connected to your home network as described in section 2. Connecting to a Net- work. 2. Choose which share(s) will be available to DLNA/UPnP devices, then enable UPnP for that share on the 5big Network 2 Dash- board (see section 4.6. Dashboard: General Settings) (Fig. 27). 3. Access the shared playlist in iTunes (Fig. 28). TECHNICAL NOTE: The iTunes Server Service supports the follow- ing file types: .mp3, .wav, .aac, .pls, and .m3u. TECHNICAL NOTE: Library sharing must be enable in the iTunes preferences for this to work (Preferences > Sharing > Look for shared libraries). Fig. 28
Page: 29
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files User Manual page 29 3.8. About iSCSIShare You can configure a 5big Network 2 share as an iSCSI target cli- ent, which allows you to mount a network share as a local share. You can then format this share in a non-network file system such as NTFS, HFS+, or FAT32. The way this works is you can allocate a portion of the 5big Network 2’s storage to iSCSIShare. Once you do this, iSCSIShare will be created automatically. To do this, go to Dashboard > Drive Infor- mation and click on the number in the Capacity column under the iSCSI drive row. Then, drag the slider to allocate space. Next, format iSCSI share by clicking the Format button to the right of the iSCSI drive row. TECHNICAL NOTE: There is no maximum amount of the 5big Network 2’s storage you can allocated to iSCSIShare. Next, you need to install and configure an iSCSI client initiator from Microsoft (Windows users) or other third party vendor. Refer to the vendor’s documentation for details. 3.8.1. iSCSIShare: Advanced If you click the Advanced link next to the iSCSIShare section of the Disk Information page, you will have the following options: CHAP: CHAP is a one-way authentication whereby the target au- thenticates the initiator. Input the username and password. Mutual CHAP: Mutual CHAP is a two-way authentication whereby the target and initiator authenticate each other. Input the initiator name and password. After modifying the above values, click Apply.
Page: 30
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 30 The LaCie 5big Network 2 features an easy-to-use browser-based tool for configuring the drive and administering users, called the Dashboard. Access the Dashboard by simply typing in your drive’s IP address or machine name into your browser or using the LaCie Network Assistant. When you log in for the first time, you will see the Setup Wizard (see section 2.4. STEP 4: Completing the Setup Wizard). Subsequent logins will take you directly to the Dashboard Home (Fig. 29). When you log in as a registered user, you will be able to administer your own account and manager the files located in the shares to which you have access. This chapter consists of the following sections to help you navigate the Dashboard and configure your 5big Network 2: 4.1. Dashboard: Accessing 4.2. Dashboard: Welcome Page 4.3. Dashboard: Navigation 4.4. Dashboard: Logging Out 4.6. Dashboard: General Settings 4.7. Dashboard: Users 4.8. Dashboard: Groups 4.9. Dashboard: Shares 4.10. Dashboard: Network 4.11. Dashboard: Drive Information 4.12. Dashboard: Eco Management 4.13. Dashboard: Support 4.14. Dashboard: Download 4.15. Dashboard: Copy 4.16. Dashboard: External Ports 4.17. Dashboard: RAID 4.18. Update Product Software 4.19. Reset to Factory 4. Administering Your LaCie 5big Network 2 Fig. 29
Page: 31
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 31 4.1. Dashboard: Accessing There are two ways to access the Dashboard, using the LaCie Net- work Assistant and using a browser. Use LaCie Network Assistant 1. Click on the LaCie Network Assistant icon in the system tray (Windows users) or menu bar (Mac users) and select LaCie-5big. The LaCie 5big Network 2 login page will open in a new browser window or tab (Fig. 30). If your browser is not open, LaCie Network Assistant will open it for you. Use a Browser 1. Open your Internet browser (Firefox, Internet Explorer, Sa- fari, etc.) and type your LaCie 5big Network 2’s IP address or machine name (by default, LaCie-5big) in the browser’s URL (web address) field (Fig. 31). http://[IP address] or http://LaCie-5big (Windows) http://lacie-5big.local (Mac) NOTE: The IP address of your LaCie 5big Network 2 can be found by clicking on the Network tab of the LaCie Network As- sistant network Configuration Window (Fig. 32). 2. For administrative access, in the login prompt, enter your admin username and password. 3. Click Login. IMPORTANT NOTE: The login and password are case-sensitive. Fig. 30 Fig. 31 Fig. 32
Page: 32
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 32 4.2. Dashboard: Welcome Page The welcome page contains links to helpful documents from the LaCie Website (Fig. 33, a) and a table listing the different pages that make up the Dashboard (Fig. 33, b). You can also change the admin user data (Fig. 33, c). IMPORTANT INFO: If you sign onto the Dashboard as an admin- istrator, you will see the detailed Welcome page with full manage- ment capability (as in Fig. 33). If you sign in as a user, you will have fewer options (ability to change username/password and access the file browser). 4.3. Dashboard: Navigation The Dashboard is made up of a central area surrounded by widgets, or small boxes that represent the different pages that make up the Dashboard. The widget displays a summary of the information con- tained in the page. For full information, navigate to the page itself. ✦ ✦ To navigate to a page, click the widget below its title. ✦ ✦ To minimize a widget, click the X next to its title. ✦ ✦ To expand a minimized widget, drag its icon over an expand- ed widget, which replaces it. 4.4. Dashboard: Logging Out To log out of the Dashboard, click the log out button in the upper right-hand corner of any Dashboard page (Fig. 34). 4.5. Dashboard: Restart/Shutdown To restart or shut down the drive, click this button, then choose be- tween Deep Sleep Mode and Restart (Fig. 35). Fig. 33 Fig. 34 Fig. 35
Page: 33
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 33 4.6. Dashboard: General Settings This page allows the administrator to modify some of your 5big Net- work 2’s general parameters. Machine Name: Modify the machine name. The machine name identifies your 5big Network 2 in LaCie Network Assistant and on the local network. IMPORTANT INFO: The machine name is limited to 15 charac- ters. Date (mm/dd/yy): Change the date. Time: Change the time. Language: Change the Dashboard language. Time zone: Change the time zone. NTP Server: Click the box, then click the field to the right and type the address of a Network Time Protocol server to provide the time for the 5big Network 2 automatically. While NTP is selected, you can’t modify the time and date settings. Workgroup: Modify the Windows workgroup name to set your 5big Network 2 to belong to a certain workgroup. Domain: See section 4.6.1. Active Directory. TECHNICAL NOTE: Mac users connected to a network with Win- dows com­ puters can also access shares this way by selecting in the Finder Network > [Workgroup] > LaCie-5big where “[Work­ group]” is the name of the Windows workgroup. Toggle Services: Turn the various services off or on. By default, all these services are enabled. However, UPnP and Time Machine ser- vices also need to be enabled at the share level in order to be op- erative (4.9. Dashboard: Shares). ✦ ✦ SMB: Toggle this feature to activate/deactivate the SMB net- work transfer protocol. ✦ ✦ AFP: Toggle this feature to activate/deactivate the AFP (Apple Filing Protocol). ✦ ✦ FTP Service: Toggle this feature on to allow your 5big Network 2 to be accessible via File Transfer Protocol (FTP). Refer to section 3.4. Accessing Shares via FTP for details on FTP ac- cess. continued on the next page >> Fig. 36
Page: 34
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 34 ✦ ✦ UPnP: This feature allows your 5big Network 2 to act as a UPnP multimedia server. Files stored in shares where UPnP service is active will be available to play on UPnP-enabled players (such as cell phones, computers, and game consoles). For information on using your 5big Network 2 to stream files to your UPnP devices, see 3.6. Multimedia Server. For in- formation on using the 5big Network 2 as an iTunes music server, see section 3.7. iTunes Music Server. ✦ ✦ Time Machine: The 5big Network 2 is compatible with Apple’s Time Machine, which backs up your Macintosh onto an exter- nal volume at regular intervals. TECHNICAL NOTE: If you’ve just added new content to the 5big Network 2, it could take a few minutes before they are available to UPnP/DLNA-certified players/adapters. 4.6.1. Active Directory This feature allows you to join the 5big Network 2 to a Windows domain. Once connected, existing users/passwords in the domain are respected by the 5big Network 2 and treated exactly as if they were created in the Dashboard. You can use the Users page to as- sign domain users access to the 5big Network 2’s shares. To connect to a share, click the Domain box, then fill in the Fully Qualified Domain Name, Admin login, and Admin password. For more complex network configurations, click the Advanced Criteria arrow and fill in the Server name and IP address (Fig. 37). To leave the domain, click the Leave button, then authenticate by inputting admin username and password (Fig. 38). Once connected, you should see the domain’s associated users in the Dashboard’s Users page (these users will be identified by the word Domain in place of password). Fig. 37 Fig. 38
Page: 35
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 35 4.7. Dashboard: Users This page allows you to manage user accounts. See below to learn how to accomplish user management-related tasks (Fig. 39). User data is organized in a table. ✦ ✦ An X in the Admin column indicates the user has administrative privileges. ✦ ✦ The number in the Shares column indicates to how many shares the user has access. ✦ ✦ The number in the Groups column shows to how many groups the member belongs. ✦ ✦ The bullet in the Domain column indicates whether the user has been inherited from when the product joined a domain. 4.7.1. Adding a New User 1. Click the green plus sign next to the page title (“Users ac- counts”). 2. In the box that opens, type in the username (You may enter 4 to 20 characters using letters (case sensitive), numbers, the hyphen, and the underscore. No other symbols, punctuation, or spaces may be used. Do not begin or end with a hyphen and/or an underscore.), password (4 to 20 characters), confirm pass- word, and optional fields (email address, toggle administrator account) (Fig. 40). Click the Admin account box to give the user admin privileges. 3. Press the green plus sign at right to create the user account. IMPORTANT NOTE: The password is case-sensitive. IMPORTANT INFO: The administrator password must be at least 4 characters. TECHNICAL NOTE: Providing an email address will allow the user to receive notifications regarding their user account sent automati- cally by the 5big Network 2. See section 4.13.1. Email Notification Events for details. Fig. 39 Fig. 40
Page: 36
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 36 4.7.2. Deleting a User 1. Click the gray “x” to the right of the user listing in the table. 2. In the confirmation box, click Delete (Fig. 41). 4.7.3. Editing a User 1. Click on the text in any field in the user table to modify a value (Fig. 42). CAUTION: Decreasing the capacity of a quota can cause data to be deleted. Fig. 41 Fig. 42
Page: 37
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 37 4.8. Dashboard: Groups This page allows the administrator to manage groups. Groups help to simplify users management and access to shares. They allow administrators to change access rights to entire groups rather than individually. From this page, administrators can: create, modify, delete, and add users to groups. TECHNICAL NOTE: Users can belong to multiple groups. TECHNICAL NOTE: If a discrepancy exists between the rights as- signed to an individual and rights assigned to a group to which the individual belongs, the more permissible rights prevail. For exam- ple, if a user has access to a share called “Backup” and she belongs to a group that does not have this access, she will still have access to “Backup” (see chart at right). 4.8.1. Adding New Group To create a new group, click the green plus sign then fill in the group name and description (optional) (Fig. 44). 4.8.2. Editing a Group You can change the group name or description by clicking on the field and typing. Fig. 43 Fig. 44 User permissions Group permissions Access Read / Write Read / Write access R/W Read / Write Access Read Only R/W Read / Write No Access R/W Read only Read / Write access R/W Read only Access Read Only RO Read only No Access RO No Access Read / Write access R/W No Access Access Read Only RO No Access No Access NA
Page: 38
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 38 4.8.3. Deleting a Group To delete a group, click the edit icon to the right of the group’s listing (Fig. 45). In the window that opens, click Delete this group. Confirm deletion in the dialogue window (Fig. 46). Note that this process does not delete users assigned to the group. 4.8.4. Adding/Removing Users from a Group To add or remove a user from a group, click the edit icon to the right of the group’s listing, then select Manage users (Fig. 47). To add a user, select him/her in the Users column and click the add button. To remove a user, select the user in the Members column and click the remove button. To select multiple items, hold down the Ctrl key (Windows) or Command key (Mac). You can assign a group’s access to a share using the Shares page. Fig. 46 Fig. 47 Fig. 45
Page: 39
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 39 4.9. Dashboard: Shares Shares – network folders – comprise the storage capacity of the 5big Network 2. Out of the box, it has two shares, Share and Public. The Shares page in the Dashboard allows the administrator to assign quotas and access rights to users and groups, and to toggle share- level access protocols (Fig. 48). TECHNICAL NOTE: It’s not necessary to create shares in order to use the product. Simply use the default Share or Public. 4.9.1. Adding a New Share To create a new share, click the green plus sign, then fill in the group name, description (optional), and quota (optional). If you do not set a quota, the size allocated to the share is unlimited (until the drive is filled). Then, decide on whether the share will be public or private. If you choose public, all users and guests will have Read/Write access to the share. IMPORTANT INFO: If you do not select the Public check box, then no user will have access to the share until you assign access rights. 4.9.2. Modifying a Share To modify a share’s name, description, or quota, click on the field and begin typing (Fig. 49). For details on changing access rights, see 4.9.4. Setting/Modifying Access Rights for Users/Groups. 4.9.3. Deleting a Share To delete a share, click the edit icon to the right of the share’s listing. In the window that opens, click Delete this Share. Confirm deletion in the dialogue window (Fig. 50). Note that deleting a share will erase any files stored on the share. Fig. 48 Fig. 49 Fig. 50
Page: 40
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 40 4.9.4. Setting/Modifying Access Rights for Users/Groups To modify access rights to the share for users or groups, follow the instructions below (and refer to Fig. 51). ✦ ✦ Modify user access (to a private share): Click the edit icon to the right of the share listing, then select Manage User Access. In the window that opens, select a user in either the Read Write or Read Only column and click the add button. To remove a user, select the user in the Members column and click the remove button. TECHNICAL NOTE: If you select “Grant read access to Guest and System users”, the Share will be accessible in RO by any user (including guests) in addition to registered users. This will be indi- cated in the Shares table with a “+” next to the number of users with access to the share. ✦ ✦ Modify group access: Click the edit icon to the right of the share listing, then select Manage Group Access. Select a group in either the Read Write or Read Only box in the left- hand column and click the add button. To remove a group, select the group in the right-hand column and click the re- move button. ✦ ✦ To make a share private or public: Click the edit icon to the right of the share listing, then select either Change share to public or Change share to private. 4.9.5. About Access Rights ✦ ✦ Read-Only means that all users can view and open files, but they only the administrator can copy files to the share (see table at right). ✦ ✦ Read/Write means that all users can view, modify, and copy files to the share. 4.9.6. Specify Share-Level Access Protocols If you click on the bullet under the Protocols column, you can modify which access protocols are active for that share. By default, new shares have SMB, AFP, and FTP enabled. If you want the share to serve files to UPnP/DLNA devices and/or to act as a Time Machine target, activate these protocols by clicking on the bullet in the Proto- cols column. If the default setting is overruled at the share level, the bullet in the Services column will turn from blue to yellow (Fig. 52). Fig. 51 Fig. 52
Page: 41
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 41 4.10. Dashboard: Network This page allows you to modify your 5big Network 2’s network set- tings. Note that there are two tabs to the page, standard and ad- vanced. 4.10.1. Standard Settings Configure using DHCP or manually: If your network is DHCP-en- abled, as are most consumer networks, the 5big Network 2 will au- tomatically be assigned an IP address and other values. As a result, most users will see that the table has been filled in with values. If you select Configure Manually, you will be able to modify the table values. Load balancing or Fail over: If you have a second Ethernet connec- tion to your compliant router or hub, you can choose either Load balancing to improve Ethernet performance or fail over to ensure that when one Ethernet link is broken physically or logically, the backup connection will take over. Automatic port forward: If you want your 5big Network 2 to be ac- cessible via the internet for remote access, you need certain ports to be open in your router to allow proper communication. Check this box to enable port forwarding, which uses UPnP-IGD/NAT-PMP to automate port forwarding (if your router is compatible). TECHNICAL NOTE: The following ports need to be forwarded to ensure proper communication: 21 (FTP) and 80 (HTTP). IMPORTANT INFO: If you activate automatic port forward, public shares will become accessible (read/write) through FTP. continued on the next page >> Fig. 53
Page: 42
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 42 Dynamic IP Resolution: You can use a third party Dynamic DNS service to create an easy-to-remember URL for accessing your 5big Network 2 remotely. This service is free and no subscription is re- quired. Follow these steps: 1. Go to a Dynamic DNS service provider such as DYNDNS.com. 2. Create an account. 3. Input the 5big Network 2’s IP address and create a hostname (ex. smithfamily.dyndns.org). 4. On the Dashboard, open the Network page and enter the ser- vice provider, username, hostname and password you set up. 5. Click Apply. 6. From any internet connection, open a web browser and type the hostname (Fig. 54). Your 5big Network 2 login page will open. 4.10.2. Advanced Settings Proxy Configuration: The 5big Network 2 can be configured to con- nect to a proxy server. Fill in the server URL, port, and optional authentication information and click Apply. SMTP Configuration: To make sure your 5big Network 2 can send alert emails to users, configure the SMTP settings. Verify the alert system works by clicking the Send a verification email box. After modifying any of the above settings, click the Apply button. Fig. 55 Fig. 54
Page: 43
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 43 4.11. Dashboard: Drive Information This page shows you information about disk usage and will allow you to reformat your drive. 4.11.1. Formatting Your 5big Network 2 When you click the top Format button (Fig. 56, a), ALL data on the disk will be erased and the disk will be formatted. Data on any USB or eSATA hard drive connected to the front port will not be affected. To reformat: 1. Click the FORMAT button. 2. In the blue window that opens, confirm by flicking the FORMAT button. CAUTION: Formatting will erase all the data on your drive (but will not remove users or settings). Make sure to back up all your data onto another volume before proceeding. LaCie cannot be held for responsible for the loss of data occurring during formatting. Fig. 56 Fig. 57
Page: 44
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 44 4.12. Dashboard: Eco Management Status light on: Uncheck this box to turn off the blue light. Note that this will not disable warning indicators. Eco Mode after: Set the duration of inactivity after which the drive will revert to Eco mode, which spins down the disks and reducing power consumption. The product leaves Eco mode automatically when a request is sent to the drive. Deep sleep enable: Deep sleep means that the drive will enter a very low energy consumption mode instead of turning off when you click the Shut Down button (see below). This mode can be triggered by clicking and holding the front blue button. To wake the drive from Deep Sleep Mode, press the blue button or use the Wake on LAN function in the LaCie Network Assistant (see 4.12.2. Wake on LAN). IMPORTANT INFO: If Deep Sleep Mode is enabled, clicking the Shut Down button (see below) will cause the drive to enter Deep Sleep Mode, and will NOT switch off the product. IMPORTANT INFO: When Sleep mode is activated, all processes, including downloads and backups, will be terminated. Scheduled Switch On: Set the drive to activate deep sleep mode at a certain time to save energy. Scheduled Switch Off: Set the drive to deactivate deep sleep mode at a certain time to save energy. UPS Management: See section 4.12.1. UPS Management for de- tails. IMPORTANT INFO: After modifying any of the above parameters, click the Apply button. NOTE: For details on using the multi-function power button, see section 2.5. Power Button Functions. Fig. 58
Page: 45
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 45 4.12.1. UPS Management The 5big Network 2 supports UPS (uninterrupted power supply) management. If you connect a supported UPS device to the 5big Network 2’s USB port, in the Dashboard you will see modifiable parameters. In the left-hand column, a bullet will indicate power supply status. ✦ ✦ If green, power is being supplied through the power cable. ✦ ✦ If gray, power is not being supplied through the power cable. On the right, under the heading Battery threshold level (%), you can choose a minimum percentage of battery power at which the 5big Network 2 will automatically enter stand-by mode. Below, in the case that battery power is completely drain and the drive is automatically shut down, you can elect to have the drive restarted once power has been restored. NOTE: For a list of supported UPS devices, click the Supported UPS link. Fig. 59
Page: 46
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 46 4.12.2. Wake on LAN You can use LaCie Network Assistant (LNA) to wake your 5big Net- work 2. First time you use WOL: 1. You’ll need your drive’s MAC address. Click the LNA icon in your system tray (Windows) or menu bar (Mac) and select Con- figuration Window.... Select then copy the MAC address text (Fig. 60). 2. Next, click the LNA icon in your system tray (Windows) or menu bar (Mac) and select Wake Up a Device... (Fig. 60). 3. Paste the MAC address into the field and click Wake Up. Subsequent use: 1. Click the LNA icon in your system tray (Windows) or menu bar (Mac) and select Wake Up a Device... (Fig. 60). 2. Choose the NAS product you wish to wake up from the menu (Fig. 61). 3. Click Wake Up. Fig. 60 Fig. 61 Fig. 62
Page: 47
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 47 4.13. Dashboard: Support The support page will allow you to access the system log and set up email alerts. System log: Click the Clear button to purge the system log. Click the Download button to save the log to your computer in case you need to provide it to customer support. Alert notification: If you toggle this box on, when significant events occur with your 5big Network 2, the administrator will automatically be sent an email (if he or she set an email address in the Users page, if the drive has a connection to the internet, and the SMTP configu- ration has been set up). See 4.13.1. Email Notification Events for more information. Auto update: To check for new Dashboard updates, click the down- load button (Fig. 64). To configure auto-update, click the edit button (Fig. 65) and adjust when and how frequently you want the system to check for new updates. Fig. 63 Fig. 64 Fig. 65
Page: 48
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 48 4.13.1. Email Notification Events The following events will trigger an email notification if an email ad- dress has been provided in the User page: Event Identifier Description Recipient Capacity When the total avail- able capacity is less than 10GB Admin Quota event When the user share is more than 80 % full Relevant user Download When a download has completed or when a download error has occurred Admin or user depending on download owner Backup When a backup error occurs Admin Temperature The product has remained at maximum temperature for at least one minute Admin Password recovery A user has recovered his/her password Admin or user, depending on who made the request RAID events A build has started or completed, a spare is active or failed, or a disk failed or disappeared Admin Fig. 66 From: "5big Network 2.0 - LaCie-5big" <jdoe@lacie.com> Subject: [LaCie] Password Recovery Date: June 9, 2009 5:40:47 PM GMT+03:00 To: jdoe@lacie.com Host : LaCie-5big Model : 5big Network 2.0 System Time : Tue, 09 Jun 2009 14:37:50 For password recovery Click here ================================================ [ This message is automatically generated by the LaCie email notification service ] www.lacie.com
Page: 49
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 49 4.14. Dashboard: Download The 5big Network 2 Dashboard features a torrent server that will allow you to download torrent files (Fig. 67). For more information on torrents, see: http://en.wikipedia.org/wiki/BitTorrent_protocol 1. First click the Start Download Machine button. 2. To start a download, click the green plus sign next the page title (Fig. 68). 3. Choose whether the torrent source is a file or a URL, then navi- gate to the source. 4. Choose the destination (i.e., on which share the downloaded file will be stored) and click SUBMIT. 5. The file will begin downloading (can sometimes take a few min- utes to begin). 4.14.1. Download Page Settings TECHNICAL NOTE: The download manager is only available to administrators. Below the list of downloads are several settings (Fig. 69). TCP Listening port: Choose a router port through which the torrent service will operate. Download limit rate: Type a number here to restrict maximum down- load rates. Upload limit rate: Type a number here to restrict maximum upload rates. Max. active torrents: Type a number here to limit the number of torrents that can download/upload simultaneously. Type zero for no limit. TECHNICAL NOTE: Because the torrent client service uses band- width and system resources, multiple simultaneous downloads can impact 5big Network 2 performance. Additionally, even after a download has completed, it may continue to use system resources if it is uploading, as long as the torrent is active. Fig. 67 Fig. 69 Fig. 68
Page: 50
LaCie 5big Network 2 • DESIGN BY NEIL POULTON Administering Your LaCie 5big Network 2 User Manual page 50 4.15. Dashboard: Copy This page will allow administrators to set up backups (Fig. 70). In order to use a share for a backup, the user initiating the backup must have Read/Write privileges for that share, or the share must be Public. 4.15.1. Creating a Backup Job 1. Click the green plus sign to the right of the page title (“Jobs List”) (Fig. 71). 2. Set a Source share (what you want to back up) in the left menu and a Destination share (where you want to save the backup) in the right menu. 3. If you wish, set a time and date for the backup job. 4. After a moment, a message will appear saying that the backup has begun (Fig. 72). 5. A message will notify you when the backup is finished. Fig. 70 Fig. 72 Fig. 71

Question & answers

Have a question about the LaCie 5big Network 2 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the LaCie 5big Network 2. Please make sure that you describe your difficulty with the LaCie 5big Network 2 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the LaCie 5big Network 2

Name
Email
Reaction

View a manual of the LaCie 5big Network 2 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: LaCie
  • Product: Servers
  • Model/name: 5big Network 2
  • Filetype: PDF
  • Available languages: Dutch, English, French, Spanish, German, Portuguese, Italian