These are the most frequently asked questions about the JVC KW-R600BT. Do you know the answer?
As this radio got rdsAnswer question
View a manual of the JVC KW-R600BT below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. Battery Products Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. . Warning: Stop the car before operating the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Avoid using the USB device or iPod/iPhone if it might hinder driving safety. Caution on volume setting: Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by the sudden increase of the output level. Temperature inside the car: If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. 2 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
How to reset your unit Your preset adjustments will also be erased. How to forcibly eject a disc (Hold) Be careful not to drop the disc when it ejects. If this does not work, reset your unit. Maintenance Cleaning the unit Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the unit. Contents Preparation ............................................................ 4 Canceling the display demonstration Setting the clock Basic operations ................................................... 4 Radio ........................................................................ 6 CD/USB .................................................................... 8 iPod/iPhone ............................................................. 9 Quick Search ....................................................... 10 External components ...................................... 10 Bluetooth姞 connection ..................................... 11 Bluetooth mobile phone ................................ 13 Bluetooth audio player ................................... 17 Illumination color adjustments .................... 18 Brightness adjustments .................................. 19 Sound adjustments .......................................... 19 Menu operations ............................................... 20 Remote controller ............................................... 23 Additional information ................................... 23 Troubleshooting ................................................ 26 Specifications ..................................................... 28 How to read this manual: This manual mainly explains operations using the buttons on the control panel. < > indicates the displays on the control panel. [XX] indicates the initial setting of a menu item. ENGLISH|ޓ 3 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Canceling the display demonstration The display demonstration is always turned on unless you cancel it. (Hold) 1 (Initial setting) 2 3 Select <DEMO OFF>. 4 Press MENU to exit. Setting the clock (Hold) 1 2 Select <CLOCK>. 3 Select <CLOCK SET>. (Initial setting) 4 Adjust the hour. 5 Adjust the minute. 6 Select <24H/12H>. 7 Select <24 HOUR> or <12 HOUR>. 8 Press MENU to exit. Basic operations Display information Changes the display information. (Press) Scrolls the current display information. (Hold) Source Display Radio Non-Radio Data System station: Frequency ) Clock FM Radio Data System station: Station name (PS) - Frequency - Programme type (PTY) - Clock - (back to the beginning) CD/USB/Bluetooth Audio Album title/Artist* - Track title* - Track no./Playing time - Track no./Clock - (back to the beginning) * “NO NAME” appears for conventional CDs or if not recorded. iPod/iPhone (HEAD MODE/ IPOD MODE) iPod/iPhone (APP MODE) APP MODE) Clock External Components (AUX) AUX IN) Clock Preparation Preparation 4 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Remote controller USB input terminal DO NOT expose to bright sunlight. Remote sensor Ejects the disc Display window Control dial Loading slot Control panel Aim the remote controller directly at the sensor. AUX input jack When you press or hold the following button(s)... Control panel Remote controller General function SOURCE — Turns on. Turns off. (Hold) Press the SOURCE button on the control panel and turn the control dial within 2 seconds to select the source. SOURCE Press repeatedly to select the source. Control dial (turn) VOL - / + Adjusts the volume level. — Selects items. Control dial (press) ) Mutes the sound or pauses playback. Press the button again to cancel muting or resume playback. — Confirms selection. Number buttons (1 - 6) — Selects the preset stations. Stores the current station into the selected number button. (Hold) (' page 6) EQ SOUND Selects the preset sound mode. (' page 19) — Enters “Hands-Free” menu (' page 14), or answers incoming call when the unit rings. Ends a call. (Hold) — Activates/deactivates TA Standby Reception. (' page 7) Enters PTY Search mode. (Hold) (' page 7) Returns to the previous menu. / / Selects a preset station. (' page 6) Selects MP3/WMA/WAV folder. (' page 8) / / Searches for a station automatically. (' page 6) Searches for a station manually. (Hold) Selects track. (' page 8, 9, 17) Fast-forwards or reverses track. (Hold) Basic operations ENGLISH|ޓ 5 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Searching for a station Select <FM> or <AM>. Auto search. (Press) Manual search. (Hold) “M” flashes, then press the button repeatedly. A B “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Storing stations in memory Manual presetting You can preset up to 18 stations for FM and 6 stations for AM. While listening to a station... (Hold) The preset number flashes and “MEMORY” appears. The current station is stored to the selected number button (1 - 6). - - - - - - - - or - - - - - - - - (Hold) “PRESET MODE” flashes. 1 The preset number flashes and “MEMORY” appears. 2 Select preset number. Auto presetting (FM only) SSM (Strong-station Sequential Memory) You can preset up to 18 stations for FM. (Hold) 1 -<TUNER> -<SSM> -<SSM 01 – 06> “SSM” flashes. When all the stations are stored, “SSM” stops flashing. 2 To preset <SSM 07 – 12>/<SSM 13 – 18>, repeat steps 1 and 2. Selecting a preset station - - - - - - - - or - - - - - - - - You can also select a preset station using / . Setting the Radio Timer You can tune in to a preset station at a specific time regardless of the current source. (Hold) 1 -<TUNER> -<RADIO TIMER> -<OFF>/<ONCE>/ <DAILY> [OFF] Cancels Radio Timer. ONCE Activates once. DAILY Activates daily. 2 -<FM>/<AM> -<01> ... <18> for FM/ <01> ... <06> for AM 3 Select the preset station. 4 Set the activation time. 5 Press MENU to exit.
lights up after the Radio Timer has been set. Only one timer can be set. Setting a new timer will override the previous setting. The Radio Timer will not activate if the unit is turned off or if <AM> is set to <OFF> after selecting an AM station for the timer. Radio Radio 6 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
The following features are available only for FM Radio Data System stations. Searching for your favorite Programmes—Programme Type (PTY) Search (Hold) 1 PTY Search starts. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. 2 Select a PTY code. PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONEIN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT Activating TA/News Standby Reception Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) or NEWS programme from any source other than AM. TA Standby Reception TP indicator TA Standby Reception Lights up The unit will temporarily switch to Traffic Announcement (TA) if available. Flashes Not yet activated. Tune in to another station providing the Radio Data System signals. To deactivate, press again. NEWS Standby Reception (Hold) 1 -<TUNER> -<NEWS-STBY> -<NEWS ON> The unit will temporarily switch to News Programme if available. 2 If the volume is adjusted during reception of Traffic Announcement or News, the adjusted volume is automatically memorized. It will be applied the next time the unit switches to Traffic Announcement or News. Tracking the same programme —Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals. (Hold) 1 -<TUNER> -<AF-REG> * 2 [AF ON] Switches to another station. The programme may differ from the one currently received (the AF indicator lights up). AF-REG ON Switches to another station broadcasting the same programme (the AF indicator lights up). OFF Cancels. * AF-REG: Alternative Frequencies-Regional Automatic station selection— Programme Search When the signal of a preset station you have selected is weak, this unit searches for another station possibly broadcasting the same programme as the original preset station is broadcasting. <P-SEARCH> (' page 21) Radio ENGLISH|ޓ 7 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Playing a CD/USB device Label side The source changes to “CD” and playback starts. USB 2.0 cable (not supplied) USB input terminal or USB cable from the rear of the unit The source changes to “USB” and playback starts. This unit can play MP3/WMA files stored in CD-R, CD-RW, and MP3/WMA/WAV files in USB mass storage device (such as a USB memory and Digital Audio Player). Make sure all important data has been backed up. We shall bear no responsibility for any loss of data in USB mass storage class device while using this system. Ejected disc not removed within 15 seconds will reload automatically. If the disc cannot be ejected, ' page 3. Selecting a folder/track Selects folder. (For MP3/WMA/WAV) Selects track. (Press) Fast-forwards or reverses the track. (Hold) Selecting a track/folder from the list 1 2 Select a folder. (For MP3/WMA/WAV) For MP3/WMA/WAV If there are many folders or tracks, you can fast search for the desired folder or track by turning the control dial quickly, or use Quick Search (' page 10). 3 Select a track. Selecting the playback modes You can select one of the following playback modes at a time. Press 1 for REPEAT. Press 2 for RANDOM. Press again to exit. - - - - - - - - or - - - - - - - - (Hold) <REPEAT>)<RANDOM> 1 2 REPEAT RPT OFF Cancels repeat playback. TRACK RPT Repeats current track. FOLDER RPT * Repeats current folder. RANDOM RND OFF Cancels random playback. FOLDER RND * Randomly plays all tracks of current folder, then tracks of next folders. ALL RND Randomly plays all tracks. * For MP3/WMA/WAV CD/USB CD/USB 8 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
iPod/iPhone Playing an iPod/iPhone USB input terminal or USB cable from the rear of the unit USB 2.0 cable (not supplied)* The source changes to “IPOD-FRONT/IPOD-REAR” and playback starts. * Recommend to use a cable suitable for car use. Selecting the control mode -<HEAD MODE>/<IPOD MODE>/ <APP MODE> HEAD MODE Controls iPod playback through this unit. IPOD MODE Controls iPod playback from the iPod/iPhone. APP MODE The sound of any functions (music, games, applications, etc.) running on the connected iPod/iPhone is emitted through the speakers connected to this unit. You can also change the setting using <IPOD SWITCH> in the menu. (' page 22) Selecting a track Applicable under <HEAD MODE>/<IPOD MODE> only. For <APP MODE>, applicable only for some audio applications. Selects track/chapter. (Press) Fast-forwards or reverses the track. (Hold) Selecting a track from the list Applicable under <HEAD MODE> only. 1 PLAYLISTS)ARTISTS)ALBUMS)SONGS) PODCASTS)GENRES)COMPOSERS) AUDIOBOOKS) (back to the beginning) 2 Select the desired list. Repeat this step until the desired track is selected. If the selected menu contains many tracks, you can fast search for the desired track by turning the control dial quickly, or use Quick Search (' page 10). 3 Select the desired track. Selecting the playback modes Applicable under <HEAD MODE> only. You can select one of the following playback modes at a time. Press 1 for REPEAT. Press 2 for RANDOM. Press again to exit. - - - - - - - - or - - - - - - - - (Hold) <REPEAT>)<RANDOM> 1 2 REPEAT RPT OFF Cancels repeat playback. ONE RPT Functions the same as “Repeat One” of the iPod. ALL RPT Functions the same as “Repeat All” of the iPod. RANDOM RND OFF Cancels random playback. SONG RND Functions the same as “Shuffle Songs” of the iPod. ALBUM RND Functions the same as “Shuffle Albums” of the iPod. “ALBUM RND” is not applicable for some iPod/ iPhone. iPod/iPhone application You can operate JVC original application with this unit in <APP MODE>. For more details, visit JVC website: <http://www3.jvckenwood.com/ english/car/index.html> (English website only). ENGLISH|ޓ 9 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
If you have many folders/tracks/contacts, you can search through them quickly according to the first character (A to Z, 0 to 9 and OTHERS). 1 Enter list menu or “Hands-Free” menu. CD (MP3/WMA)/ USB (MP3/WMA/WAV) iPod/iPhone Bluetooth phonebook Select the desired list. Select <PHONEBOOK>. “OTHERS” appears if the first character is not A to Z or 0 to 9, such as #, -, !, etc. 2 Select the desired character (A to Z, 0 to 9 and OTHERS). For CD/USB and iPod/iPhone, repeat step 3 until the desired track is selected. Searching may not work on some of the layers of the selected menu (for iPod/iPhone). 3 Select your desired folder/track/contact. External components You can connect an external component to the AUX (auxiliary) input jack on the control panel. For details, refer also to the instructions supplied with the external components. Playing an external component from AUX Portable audio player, etc. 3.5 mm stereo mini plug (not supplied) Use a 3-terminal plug head stereo mini plug for optimum audio output. . 1 Connect to AUX on the control panel. 2 Select <AUX IN>. 3 Turn on the connected component and start playing the source. Quick Search Quick Search 10 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
By connecting the supplied KS-UBT1 USB Bluetooth Adapter and microphone to this unit, you can operate a Bluetooth device using this unit. Refer to the “Installation/Connection Manual” for details on connecting the microphone. Once the USB Bluetooth Adapter is attached, this unit is always available for pairing. Refer also to the instructions supplied with the Bluetooth device. Refer to the separate appendix to check the countries where you may use the Bluetooth function. If you turn off the unit or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone. This unit supports the following Bluetooth profiles Hands-Free Profile (HFP 1.5) Object Push Profile (OPP 1.1) Phonebook Access Profile (PBAP 1.0) Advanced Audio Distribution Profile (A2DP 1.2) Audio/Video Remote Control Profile (AVRCP 1.3) Warning: Stop the car in a safe place before operating complicated steps such as dialing numbers, using phonebook, etc. KS-UBT1 Microphone Pairing a Bluetooth device When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device. Up to five Bluetooth devices can be registered in this unit. A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. This unit supports Secure Simple Pairing (SSP). 1 Connect the USB Bluetooth adapter (KS-UBT1) to one of the USB input terminals. KS-UBT1 or USB cable from the rear of the unit USB input terminal 2 Search and select “JVC Unit” on the Bluetooth device. “BT PAIRING” flashes on the display. For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. iPod/iPhone Bluetooth姞 connection ENGLISH|ޓ 11 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
3 Perform (A) or (B) depending on what scrolls on the display. For some Bluetooth devices, pairing sequence may vary from the steps described below (A) If “[Device Name]”#“XXXXXX”# “VOL – YES”#“BACK – NO” scrolls on the display, “XXXXXX” is a 6-digit passkey randomly generated during each pairing. Operate the Bluetooth device to confirm the passkey. Ensure that the passkey which appears on the unit and Bluetooth device is the same. Select “YES” to confirm the passkey. (B) If “[Device Name]”#“VOL – YES”# “BACK – NO” scrolls on the display, (1) If “PAIRING”#“PIN 0000” scrolls on the display, enter the PIN code “0000” into the Bluetooth device. You can change to a desired PIN code before pairing. (' page 22) Select “YES” to start the pairing. (2) If only “PAIRING” appears, operate the Bluetooth device to confirm pairing. After pairing is successful, “PAIRING COMPLETED” appears on the display. The unit will establish a connection with the newly paired Bluetooth device, “” lights up on the display and you can now control the Bluetooth device through the unit. “” will light up when a phone is connected. “” will light up when an audio device is connected. Once the connection is established, the device is registered to the unit and there is no need to perform the pairing again unless you delete the registered device. Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information. Connecting/Disconnecting a registered device manually To connect 1 (Hold) -<BLUETOOTH> -<PHONE>/<AUDIO> -<CONNECT> 2 Select <CONNECT>. “CONNECTING”#“[Device Name]” scrolls on the display when the unit is connecting to the device. “CONNECTED”#“[Device Name]” scrolls on the display when the device is connected. 3 Select the desired device. 4 Press MENU to exit. To disconnect 1 (Hold) -<BLUETOOTH> -<PHONE>/<AUDIO> -<DISCONNECT> 2 Select <DISCONNECT>. “DISCONNECT”#“[Device Name]” scrolls on the display when the device is disconnected. 3 Select the desired device. 4 Press MENU to exit. Bluetooth姞 connection 12 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Connecting to JVC original application JVC original application is designed to view JVC car receiver status and perform simple control operations on Android smart phones. For JVC original application operations, visit JVC website: <http://www3.jvckenwood.com/english/car/ index.html> (English website only). 1 (Hold) -<BLUETOOTH> -<APPLICATION> -<CONNECT> 2 Select <CONNECT>. “CONNECTED”#“[Device Name]” scrolls on the display when the device is connected. 3 Select the desired smart phone. 4 Press MENU to exit. Deleting a registered device (Hold) 1 -<BLUETOOTH> -<DELETE PAIR> - [Device name] -<DELETE YES> “DELETED” appears when the device is deleted. 2 Select <DELETE YES>. 3 Press MENU to exit. Bluetooth mobile phone Receiving a call To receive a call When there is an incoming call, the source automatically changes to “BT FRONT”/“BT REAR”. “RECEIVING” appears on the display, followed by the phone number or name. The display flashes in blue. (' page 16) or You can also press ////SOURCE on the remote control to answer a call. When <AUTO ANSWER> is set to <ON>, the unit answers incoming calls automatically. (' page 16) To end a call (Hold) or (Hold) You can also press and hold ////SOURCE on the remote control to end a call. To deactivate/activate hands-free mode During a phone conversation... Operations may vary according to the connected Bluetooth device. Bluetooth姞 connection ENGLISH|ޓ 13 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Adjustments during a call Phone volume(00 — 50) [VOLUME 15]: Volume adjustments made during a call will not affect the other sources. Microphone level (01— 03): As the number increases, the microphone becomes more sensitive. Noise Reduction and Echo Cancellation mode: Turns on/off. Text message notification When a text message is received, the unit rings and “RCV MESSAGE”#“[Device name]” appears. <MSG NOTICE> must be set to <ON>. (' page 16) You cannot read, edit, or send a message through the unit. This feature is only available on certain phones. Switching between two connected mobile phones When two mobile phones are connected to the unit, you can access to both “Hands-Free” menus. Press to enter 1st phone’s “Hands-Free” menu. Press twice to enter 2nd phone’s “Hands-Free” menu. Press to return to 1st phone’s “Hands-Free” menu. Making a call from the hands-free menu 1 Enter the “Hands-Free” menu. Refer to the table below for options. 2 Select a calling method. 3 Select and call the contact (name/phone number). DIALED Call Select the name/phone number If the phonebook contains many numbers, you can fast search for the desired number by turning the control dial quickly, or use Quick Search (' page 10). “NO HISTORY” appears if there is no recorded call history. “NO DATA” appears if no entries are found in the Bluetooth device’s phonebook. “SEND P.BOOK MANUALLY” appears if <P.BOOK SEL> is set to <P.BOOK IN UNIT> or the phone does not support PBAP. (' page 16) RECEIVED MISSED CALL PHONEBOOK DIAL NUMBER Enter the phone number to dial. Call Move the entry position Select number/character Bluetooth mobile phone 14 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Making a call from memory You can store up to 6 contacts in the memory of this unit for speed dialing. To store contacts in memory 1 Enter the “Hands-Free” menu. -<DIALED>/ <RECEIVED>/ <MISSED CALL>/ <PHONEBOOK>/ <DIAL NUMBER> 2 Select a call method. 3 Select a contact (name/phone number). Phone Number or Name (Hold) “MEMORY PX” flashes. The contact is stored to the selected number button (1 - 6). To erase a contact from preset memory, select <DIAL NUMBER> in step 2 and store a blank number. 4 Store in memory. To make a call from memory 1 Enter the “Hands-Free” menu. “NO PRESET” appears if there are no contacts stored in memory. 2 Select and call the contact. Using voice recognition You can use the voice recognition features of the connected phone through this unit. “NOT SUPPORT” appears if the connected phone does not support this feature. If only one phone is connected, (Hold) 1 Enter voice recognition mode. If two phones are connected, (Hold) Select the desired phone Enter“phone list” 2 When “WAIT VOICE”#“[Device Name]” scrolls on the display, speak the name of the contact you want to call or the voice command to control the phone functions. Supported voice recognition features vary for each phone. Please refer to the instruction manual of the connected phone for details. Deleting a contact (name/ phone number) Only when <P.BOOK SEL> is set to <P.BOOK IN UNIT>. (' page 16) 1 Enter the “Hands-Free” menu. -<DIALED>/ <RECEIVED>/ <MISSED CALL>/ <PHONEBOOK> 2 Select a call method. 3 Select the contact (name/phone number) to be deleted. Phone Number or Name (Hold) 4 Enter “Delete Entries” menu. DELETE Selected name/phone number from step 3 is deleted. DELETE ALL All name/phone numbers from selected menu in step 2 are deleted. 5 Select <DELETE> or <DELETE ALL>. Bluetooth mobile phone ENGLISH|ޓ 15 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Using the SETTINGS menu 1 Enter the “Hands-Free” menu. 2 Select <SETTINGS>. To return to the previous menu, press . To exit from the menu, press MENU. 3 Repeat this step to perform the necessary settings. The following settings are applicable to the paired device. If another device is paired, perform the settings again. Menu item Selectable setting (Initial: [XX]) P.BOOK SEL * [PB IN PHONE]: The unit browses the phonebook of the connected phone. PB IN UNIT: The unit browses the phonebook registered in the unit. (You can copy the phonebook memory using <P.BOOK WAIT> (' page 22).) AUTO ANSWER ON: The unit answers incoming calls automatically. [OFF]: The unit does not answer incoming calls automatically. RING TONE [IN UNIT]: The unit rings to alert you when a call/text message comes in. – CALL: Select your preferred ring tone (TONE 1 — 5) for incoming calls. – MESSAGE: Select your preferred ring tone (TONE 1 — 5) for incoming text messages. Default ring tone is different according to the paired device. IN PHONE: The unit uses the connected phones’ ring tone to alert you when a call/text message comes in. (The connected phone will ring if it does not support this feature.) RING COLOR COLOR 01 — 29: Select your preferred color for incoming call/text message alerts. OFF: Cancels. NR/EC MODE [ON]: Turns on the Noise Reduction and Echo Cancellation of the connected microphone for clearer sound. OFF: Cancels. MIC LEVEL (01— 03): The sensitivity of the microphone increases as the MIC level is increased. MSG NOTICE [ON]: The unit rings and “RCV MESSAGE”#“[Device Name]” appears to alert you of an incoming text message. OFF: The unit does not alert you of an incoming text message. * Selectable only when the connected phone supports PBAP. Bluetooth mobile phone 16 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Playing a Bluetooth audio player A Select <BT REAR> or <BT FRONT> depending on the location of the USB Bluetooth adapter KS-UBT1. Operate the Bluetooth audio player to start playback. Operations and display indications may differ according to their availability on the connected device. Basic operations Starts or resumes playback. Mutes the sound. Selects group/folder. Reverse skips or forward skips. (Press) Fast-forwards or reverses the track. (Hold) Selecting the playback modes For Bluetooth devices that support AVRCP 1.3. Press 1 for REPEAT. Press 2 for RANDOM. Press again to exit. - - - - - - - - or - - - - - - - - (Hold) <REPEAT>)<RANDOM> 1 2 REPEAT RPT OFF Cancels repeat playback. TRACK RPT Repeats current track. ALL RPT Repeats all tracks. GROUP RPT Repeats all tracks of the current group. RANDOM RND OFF Cancels random playback. ALL RND Randomly plays all tracks. GROUP RND Randomly plays all tracks of the current group. Bluetooth audio player Bluetooth audio player ENGLISH|ޓ 17 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Illumination color adjustments Display zone Button zone All zone: Includes both Button zone and Display zone. Selecting the preset color You can select a preset color for <BUTTON ZONE>, <DISP ZONE>, and <ALL ZONE> separately. (Hold) 1 2 Select <COLOR>. BUTTON ZONE COLOR 01-29/USER/ COLOR FLOW 01-03* * Color changes in different speeds. DISP ZONE ALL ZONE Initial color: BUTTON ZONE , DISP ZONE , ALL ZONE . If <ALL ZONE> is selected, the button and display illumination will change to the current/ selected <BUTTON ZONE> color. 3 4 Press MENU to exit. Storing your own adjustments You can store your own day and night colors for <BUTTON ZONE> and <DISP ZONE> separately. (Hold) 1 2 Select <COLOR SETUP>. DAY COLOR BUTTON ZONE Select a primary color <RED/GREEN/ BLUE>, and then adjust the level <00-31>. Repeat this procedure until you have adjusted all the three primary colors. Your adjustment is automatically stored to “USER”. If “00” is selected for all the primary colors for <DISP ZONE>, nothing appears on the display. DISP ZONE NIGHT COLOR BUTTON ZONE DISP ZONE MENU COLOR ON Changes the display and buttons illumination during menu, list search, and playback mode operations. OFF NIGHT COLOR/DAY COLOR is changed by turning on/off your car’s headlight. 3 4 Press MENU to exit. 18 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
You can select your preferred brightness for <BUTTON ZONE>, <DISP ZONE> separately. (Hold) 1 -<DIMMER> -<BRIGHTNESS> -<DAY>/<NIGHT> 2 BUTTON ZONE BUTTON 00 to 31 DISP ZONE DISP 00 to 31 3 4 Press MENU to exit. Sound adjustments This unit memorizes sound settings adjusted for each individual source. Selecting the preset sound You can select a preset sound mode, for each individual source, suitable for the music genre. - - - - - - - - or - - - - - - - - Press repeatedly. DYNAMIC-VOCAL BOOST-BASS BOOST- USER-FLAT-NATURAL-(back to the beginning) Storing your own adjustments While listening, you can adjust and store the tone level for each individual source. Easy Equalizer (Hold) 1 (Initial: [XX]) SUB.W * 00 to 08  BASS LVL ** -06 to +06 [+05] MID LVL -06 to +06  TRE LVL -06 to +06 [+05] The adjustments are stored and <USER> is activated. 2 Adjust the level. Pro Equalizer (Hold) 1 -<PRO EQ> -<BASS>**/<MIDDLE>/ <TREBLE> 2 Adjust the sound elements of the selected tone. BASS (Initial: [XX]) Frequency 60/80//200 Hz Level LVL -06 to +06 [+05] Q [Q1.0]/Q1.25/Q1.5/Q2.0 MIDDLE Frequency 0.5/[1.0]/1.5/2.5 kHz Level LVL -06 to +06  Q Q0.75/Q1.0/[Q1.25] TREBLE Frequency 10.0/[12.5]/15.0/17.5 kHz Level LVL -06 to +06 [+05] Q [Q FIX] 3 4 Repeat steps 2 and 3 to adjust other tones. The adjustments are stored and <USER> is activated. 5 Press MENU to exit. * Available only when <L/O MODE> is set to <SUB.W>. (' page 21) ** Available only when <HPF> is set to <OFF>. (' page 21) Brightness adjustments Brightness adjustments ENGLISH|ޓ 19 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
(Hold) If no operation is done for about 60 seconds, the operation will be canceled. 1 2 3 Repeat step 2 if necessary. To return to the previous menu, press . To exit from the menu, press DISP or MENU. Menu item Selectable setting (Initial: [XX]) DEMO For settings, ' page 4. CLOCK CLOCK SET 24H/12H CLOCK ADJ *1 (Clock adjustment) [AUTO]: The built-in clock is synchronized with the clock data received from the FM Radio Data System station. OFF: Cancels. COLOR For settings, ' page 18. COLOR SETUP DIMMER DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>/ <COLOR SETUP> setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. *2 ON: Selects the Night adjustments. OFF: Selects the Day adjustments. BRIGHTNESS DAY/NIGHT: Brightness settings for the display and button illumination for day and night. BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31. DISPLAY SCROLL *3 [ONCE]: Scrolls the display information once. AUTO: Repeats scrolling (at 5-second intervals). OFF: Cancels. TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA/WAV tracks. OFF: Cancels. PRO EQ For settings, ' page 19. AUDIO FADER *4*5 R06 — F06: Adjusts the front and rear speaker output balance. BALANCE *5 L06 — R06: Adjusts the left and right speaker output balance. LOUD (Loudness) ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. [OFF]: Cancels. *1 Takes effect only when clock data is received. *2 The illumination control lead connection is required. (See “Installation/Connection Manual”.) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than <DIMMER AUTO>. *3 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *4 If you are using a two-speaker system, set the fader level to “00”. *5 This adjustment will not affect the subwoofer output. Menu operations Menu operations 20 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Menu item Selectable setting (Initial: [XX]) AUDIO VOL ADJUST (Volume adjust) -05 — +05: Presets the volume adjustment level of each source, compared to the FM volume level. Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.) L/O MODE (Line output mode) Select if the LINE OUT (REAR) terminals on the rear panel are connected to the rear speakers or subwoofer through an external amplifier. SUB.W: Subwoofer [REAR]: Rear speakers SUB. W *6 (Subwoofer) OFF: Cancels. [ON]: Turns on the subwoofer output. SUB.W LPF *7 (Subwoofer low- pass filter) LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. SUB.W LEVEL *7 (Subwoofer level) 00 — 08: Adjusts the subwoofer output level. HPF *7 (High-pass filter) ON: Activates the High Pass Filter. Low frequency signals are cut off from the front/rear speakers. [OFF]: Deactivates. (All signals are sent to the front/rear speakers.) BEEP (Keytouch tone) [ON]/OFF: Activates or deactivates the keypress tone. AMP GAIN (Amplifier gain) LOW POWER: Limits the maximum volume level to 30. (Select if the maximum input power of each speaker is less than 50 W to prevent damaging the speakers.) [HIGH POWER]: The maximum volume level is 50. TUNER SSM For settings, ' page 6. (Displayed only when the source is “FM”.) AF-REG *8 For settings, ' page 7. NEWS-STBY *8 (News standby) ON/[OFF]: Activates or deactivates NEWS Standby Reception. (Displayed only when the source is “FM”.) (' page 7) P-SEARCH *8 (Programme search) SEARCH ON/[SEARCH OFF]: Activates Programme Search (if <AF-REG> is set to <AF ON> or <AF-REG ON>) or deactivates. MONO (Monaural mode) Displayed only when the source is “FM”. [OFF]: Enables stereo FM reception. ON: Improves the FM reception but stereo effect will be lost. IF BAND (Intermediate frequency band) [AUTO]: Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) WIDE: Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. RADIO TIMER For settings, ' page 6. *6 Displayed only when <L/O MODE> is set to <SUB.W>. *7 Displayed only when <SUB.W> is set to <ON>. *8 Only for FM Radio Data System stations. Menu operations ENGLISH|ޓ 21 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Menu item Selectable setting (Initial: [XX]) USB *9 DRIVECHANGE: Selects to change the drive when a device with multiple drives is connected to the USB input terminal (front/rear). IPOD SWITCH *10 (iPod/iPhone control) [HEAD MODE]/IPOD MODE/APP MODE: For settings, ' page 9. AUDIOBOOKS *10 NORMAL/FASTER/SLOWER: Selects the playback speed of the Audiobooks sound file in your iPod/iPhone. Initial selection depends on your iPod/iPhone setting. BLUETOOTH *11 PHONE *12 CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/ audio device. (' page 12) AUDIO APPLICATION CONNECT/DISCONNECT: Connects or disconnects the application in the smart phone. (' page 13) DELETE PAIR For settings, ' page 13. P. BOOK WAIT Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP. SET PINCODE Changes the PIN code (1 to 6-digits). (Default PIN code: 0000) Turn the control dial to select a number, press / to move to the entry position. After entering the PIN code, press the control dial to confirm. AUTO CNNCT [ON]: Establishes connection automatically with the Bluetooth device when the unit is turned on. OFF: Cancels. INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). [NO]: Cancels. INFORMATION PH CNNT DEV/AU CNNT DEV/APP CNT DEV *13: Displays connected phone/audio/application device name. MY BT NAME: Displays the unit name (JVC Unit). MY ADDRESS: Shows address of USB Bluetooth Adapter. SRC SELECT AM *14 [ON]/OFF: Enables or disables “AM” in source selection. AUX IN *14 [AUX ON]/AUX OFF: Enables or disables “AUX IN” in source selection. BT AUDIO *15 [BT AU ON]/BT AU OFF: Enables or disables “BT AUDIO” in source selection. SOFT VER Displays the firmware version of the unit. *9 Displayed only when the source is “USB FRONT/USB REAR”. *10 Displayed only when the source is “IPOD-FRONT/IPOD-REAR”. *11 If the USB Bluetooth Adapter is not connected to the unit, “PLEASE CNNT BT ADAPTER” scrolls on the display. *12 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time. *13 Displayed only when a Bluetooth phone/audio player/application is connected. *14 Displayed only when the unit is in any source other than the corresponding source “AM/AUX IN”. *15 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is not “BT FRONT/ BT REAR”. Menu operations 22 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Preparing When you use the remote controller for the first time, pull out the insulation sheet. Insulation sheet Replacing the lithium coin battery If the effectiveness of the remote controller decreases, replace the battery. CR2025 Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. Warning: Do not install any battery other than CR2025 or its equivalent. Do not leave the remote controller in places (such as dashboards) exposed to direct sunlight for a long time. Store the battery in places out of reach of children. Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. Do not place the battery with other metallic materials. Do not poke the battery with tweezers or similar tools. Insulate the battery by wrapping it with tape when disposing or storing it. This unit is equipped with the steering wheel remote control function. For details, refer also to the instructions supplied with the remote adapter. Additional information About discs This unit can only play the following CDs: This unit can play back multi-session discs; however, unclosed sessions will be skipped during playback. Unplayable discs Discs that are not round. Discs with coloring on the recording surface or discs that are dirty. Recordable/ReWritable disc that has not been finalized. (For details on disc finalization, refer to your disc writing software and your disc recorder instruction manual.) 8 cm CD. Attempting to insert using an adapter can cause malfunction. There may also be problems ejecting the disc if inserted. Handling discs Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outwards. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove any burrs from the center hole and disc edge before inserting a disc. DualDisc playback The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. Remote controller Remote controller ENGLISH|ޓ 23 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
About audio files Playable files File extensions: MP3(.mp3), WMA(.wma), WAV(.wav) For MP3/WMA discs: Bit rate: MP3/WMA: 5 kbps - 320 kbps Sampling frequency: MP3 (MPEG-1): 32 kHz, 44.1 kHz, 48 kHz MP3 (MPEG-2): 16 kHz, 22.05 kHz, 24 kHz WMA: 8 kHz - 48 kHz For USB devices: Bit rate: MP3 (MPEG-1): 32 kbps - 320 kbps MP3 (MPEG-2): 8 kbps - 160 kbps WMA: 5 kbps - 320 kbps WAV: Linear PCM at 705 kbps and 1 411 kbps Sampling frequency: MP3 (MPEG-1): 32 kHz, 44.1 kHz, 48 kHz MP3 (MPEG-2): 16 kHz, 22.05 kHz, 24 kHz WMA: 8 kHz - 48 kHz WAV: 44.1 kHz Channel: WMA/WAV: 1 ch/2 ch Variable bit rate (VBR) files. (The elapsed time for VBR files will not be displayed correctly.) Unplayable files MP3 files: - encoded in MP3i and MP3 PRO format - encoded in an inappropriate format - encoded with Layer 1/2 WMA files: - encoded in lossless, professional, and voice format - not based upon Windows Media® Audio - copy-protected with DRM Files which include data such as AIFF, ATRAC3, etc. File/folder names This unit supports files/folder names recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet, and the proper extension code <.mp3>, <.wma> or <.wav>. Others This unit can show WMA Tag and ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3). The search function works but search speed is not constant. About USB device When connecting a USB cable, use the USB 2.0 cable. You cannot connect a computer or portable HDD to the USB input terminal of the unit. Connect only one USB device to the unit at a time. Do not use a USB hub. USB devices equipped with special functions such as data security functions cannot be used with the unit. Do not use a USB device with 2 or more partitions. This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A. This unit may not recognize a memory card inserted into the USB card reader. This unit may not play back files in a USB device properly when using a USB extension cord. Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. Operation and power supply may not work as intended for some USB devices. The maximum number of characters for: – Folder names: 25 characters – File names: 25 characters – MP3 Tag: 128 characters – WMA Tag: 128 characters – WAV Tag: 128 characters This unit can recognize a total of 20000 files, 2000 folders (999 files per folder including folder without unsupported files), and of 8 hierarchies. However, the display can only show until 999 folders/files. Cautions Do not pull out and attach the USB device repeatedly while “READING” is shown on the display. Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device. Do not leave a USB device in the car, expose to direct sunlight, or high temperature. Failure to do so may result in deformation or cause damages to the device. Additional information 24 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
About iPod/iPhone iPod/iPhone that can be connected to this unit: - iPod touch (4th generation) - iPod touch (3rd generation) - iPod touch (2nd generation) - iPod touch (1st generation) - iPod classic - iPod with video (5th generation)* - iPod nano (6th generation) - iPod nano (5th generation) - iPod nano (4th generation) - iPod nano (3rd generation) - iPod nano (2nd generation) - iPod nano (1st generation)* - iPhone 4S - iPhone 4 - iPhone 3GS - iPhone 3G - iPhone *<IPOD MODE>/<APP MODE> are not applicable. It is not possible to browse video files on the “Videos” menu in <HEAD MODE>. The song order displayed on the selection menu of this unit may differ from that of the iPod. When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In this case, visit the following JVC website: <http://www3.jvckenwood.com/english/car/ index.html> (English website only). About Bluetooth Depending on the Bluetooth version of the device, some Bluetooth devices may not be able to connect to this unit. This unit may not work with some Bluetooth devices. Signal conditions vary, depending on the surroundings. When the unit is turned off, the device is disconnected. For more information about Bluetooth, visit the following JVC website: <http://www3.jvckenwood.com/english/car/ index.html> (English website only) Trademark and license notice Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Additional information ENGLISH|ޓ 25 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Symptom Remedy/Cause 4 General No sound, sound interrupted or static noise. Check the cords, aerial and cable connections. Check the condition of the disc, connected device and recorded tracks. Ensure to use the recommended stereo mini plug when connecting to an external component. (' page 10) “MISWIRING CHK WIRING THEN RESET UNIT”/“WARNING CHK WIRING THEN RESET UNIT” appears on the display and no operations can be done. Ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. (' page 3) If the message does not disappear, consult your JVC car audio dealer or kits supplying company. The unit does not work at all. Reset the unit. (' page 3) Source cannot be selected. Check the <SRC SELECT> setting. (' page 22) The correct characters are not displayed (e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols. 4 FM/AM SSM automatic presetting does not work. Store stations manually. 4 CD/USB/iPod/iPhone “PLEASE” and “EJECT” appear alternately on the display. Press , then insert the disc correctly. “IN DISC” appears on the display. The disc cannot be ejected properly. Make sure nothing is blocking the loading slot. “READING” keeps flashing on the display. A longer readout time is required. Do not use too many hierarchical levels and folders. Reload the disc or reattach the USB device. Tracks/folders are not played back in the order you have intended. The playback order is determined by the file name (USB) or the order in which files were recorded (disc). The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. “NO FILE” appears on the display. Check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file. “NOT SUPPORT” appears on the display and track skips. Check whether the track is a playable file format. “CANNOT PLAY” flashes on the display. The unit cannot detect the connected device. Check whether the connected device is compatible with this unit. (USB: ' page 28) (iPod/iPhone: ' page 25) Ensure that the device contains files in the supported formats. (' page 24) Reattach the device. The iPod/iPhone does not turn on or does not work. Check the connection between this unit and iPod/iPhone. Detach and reset the iPod/iPhone using hard reset. For details on resetting the iPod/iPhone, refer to the instruction manual supplied with the iPod/iPhone. Check whether <IPOD SWITCH> setting is appropriate. (' page 9) Troubleshooting Troubleshooting 26 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Symptom Remedy/Cause 4 Bluetooth “BT FRONT”/“BT REAR” cannot be selected. Check <BT AUDIO> in the <SRC SELECT> setting. (' page 22) No Bluetooth device is detected. Search from the Bluetooth device again. Reset the unit. (' page 3) Pairing cannot be made. Make sure you have entered the same PIN code to both the unit and Bluetooth device. Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. “PAIRING FULL” scrolls on the display when trying to perform pairing. You have already registered the maximum of five Bluetooth devices in the unit. To pair another device, delete an existing paired device from the unit first. (' page 13) Echo or noise occurs. Adjust the microphone unit’s position. Adjust <NR/EC MODE> and <MIC LEVEL> to a better combination. (' page 16) Phone sound quality is poor. Reduce the distance between the unit and the Bluetooth device. Move the car to a place where you can get a better signal reception. The unit does not respond when you try to copy the phonebook to the unit. You may have tried to copy the same entries (as stored) to the unit. Press DISP or to exit. Sound is being interrupted or skipped during playback of a Bluetooth audio player. Reduce the distance between the unit and the Bluetooth audio player. Turn off, then turn on the unit and try to connect again. Other Bluetooth devices might be trying to connect to the unit. The connected Bluetooth audio player cannot be controlled. Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) Disconnect and connect the Bluetooth player again. “VOICE” calling method is not successful. Use “VOICE” calling method in a more quiet environment. Reduce the distance from the microphone when you speak the name. Change “NR/EC MODE” to “OFF” (' page 16), then try again. “NOT SUPPORT” appears when trying to perform voice dial. The connected phone does not support this feature. “ERROR CNNCT” appears on the display. The device is registered but the connection has failed. Connect the device manually. (' page 12) “ERROR” appears on the display. Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried. “PLEASE WAIT” appears on the display. The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). (' page 3) “HW ERROR” appears on the display. Reset the unit and try the operation again. If “HW ERROR” appears again, consult your nearest JVC car audio dealer. “BT DEVICE NOT FOUND” appears on the display. The unit failed to search for the registered Bluetooth devices during Auto Connect. Turn on Bluetooth from your device and connect manually. Troubleshooting ENGLISH|ޓ 27 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
AUDIO AMPLIFIER SECTION Maximum Power Output 50 W per channel Continuous Power Output (RMS) 20 W per channel into 4Ω, 40 Hz to 20 000 Hz at less than 1% total harmonic distortion. Load Impedance 4Ω (4Ω to 8Ω allowance) Frequency Response 40 Hz to 20 000 Hz Signal-to-Noise Ratio 80 dB Line-Out, Subwoofer-Out Level/Impedance 2.5 V/20 kΩ load (full scale) Output Impedance ≤ 600Ω TUNER SECTION FM Frequency Range 87.5 MHz to 108.0 MHz Usable Sensitivity 9.3 dBf (0.8 μV/75Ω) 50 dB Quieting Sensitivity 16.3 dBf (1.8 μV/75Ω) Alternate Channel Selectivity (400 kHz) 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 40 dB AM Frequency Range MW: 531 kHz to 1 611 kHz LW: 153 kHz to 279 kHz Sensitivity/Selectivity MW: 20 μV/40 dB, LW: 50 μV CD PLAYER SECTION Signal Detection System Non-contact optical pickup (semiconductor laser) Number of Channels 2 channels (stereo) Frequency Response 5 Hz to 20 000 Hz Signal-to-Noise Ratio 98 dB Wow and Flutter Less than measurable limit USB SECTION USB Standard USB 1.1, USB 2.0 Data Transfer Rate (Full Speed) Max. 12 Mbps Compatible Device Mass storage class Compatible File System FAT 32/16/12 Playable Audio Format MP3/WMA/WAV Maximum Supply Current DC 5 V " 1 A BLUETOOTH SECTION Version Bluetooth 2.1 certified (+EDR) Power Class Class 2 Radio Service Area 10 m Profile HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3, PBAP 1.0 Specifications Specifications 28 |ޓENGLISH 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
GENERAL Power Requirement (Operating Voltage) DC 14.4 V (11 V to 16 V allowance) Grounding System Negative ground Allowable Operating Temperature 0°C to +40°C Dimensions (W × H × D) Installation Size approx. 182 mm × 111 mm × 160 mm Panel Size approx. 188 mm × 117 mm × 18 mm Mass 1.8 kJ (excluding accessories) Subject to changes without notice. Specifications ENGLISH|ޓ 29 2011/12/21ޓ1:30:5 KW-R600BT_E_EN D o w n l o a d e d f r o m w w w . v a n d e n b o r r e . b e
Have a question about the JVC KW-R600BT but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the JVC KW-R600BT. Please make sure that you describe your difficulty with the JVC KW-R600BT as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.