JVC JLE55SP4000 manual

View a manual of the JVC JLE55SP4000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: JVC
  • Product: LED TV
  • Model/name: JLE55SP4000
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
Regulatory Statement
1
Welcome to the JVC family of customers. We hope that you will have
many years of enjoyment from your new JVC 3D Smart e-LED HDTV. To
get the most out of your JVC 3D Smart e-LED HDTV, read these
instructions before making any adjustments, and retain them for future
reference.
For assistance, call the JVC Customer Support and Service Center at 1-
855-868-1928 or visit our website at http://go.jvc.com/HDTVSupport/.
We recommend that you register your JVC 3D Smart e-LED HDTV either
at our website at http://go.jvc.com/HDTVSupport/ or fill out and mail
the Product Registration Card on the back of the Quick Start Guide.
Retain your purchase receipt and write down the model and serial
number located at the back of your HDTV for easy reference when
obtaining service support.
Page: 2
Regulatory Statement
2
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. JVC, THE JVC LOGO, AND OTHER JVC TRADEMARKS ARE THE INTELLECTUAL PROPERTY
OF JVC KENWOOD CORPORATION.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
COPYRIGHT 2012 AmTRAN Video Corporation. ALL RIGHTS RESERVED
Page: 3
Regulatory Statement
3
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated dangerous voltage with
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Page: 4
Regulatory Statement
4
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLICANCE TO RAIN OR MOISTURE. TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Page: 5
Regulatory Statement
5
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618, USA
Telephone No; 949-336 6633
Required Marking Location
The rating sheet and the safety caution are on the rear of the unit.
Page: 6
Important Safety Information
6
1) Read these instructions.
2) Heed all warnings.
3) Follow all instructions.
4) Do not use this device near water.
5) Clean only with dry cloth.
6) Do not block any ventilation openings. Install in accordance with
manufacturer’s instructions.
7) Do not install near any heat sources such as radiators, heat registers,
stoves, or other heat-generation devices.
8) Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
9) Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
device.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
12) Unplug this apparatus during lightning storms or when unused for long
periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
14) Apparatus should not be exposed to dripping or splashing, and objects
filled with liquids, such as vases, should not be placed on the apparatus.
15) An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
16) Do not overload wall outlets and extension cords, as this can result in a
risk or fire or electric shock.
17) Do not push objects through any openings in this unit as they may touch
dangerous voltage points or short out parts that could result in fire or
electric shock. Never spill or spray any type of liquid into the unit.
Page: 7
Important Safety Information
7
18) If an outside antenna or cable system is connected to the unit, be sure he
antenna or cable system is gounded to provide some protection against
voltage surges and built-up static charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with respect to
proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
19) When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or those that have the
same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
20) Upon completion of any service or repairs to this unit, ask the service
technician to perform safety checks to determine that the unit is in proper
operating condition.
21) When you connect the product to other equipment, turn off the power and
unplug all of the equipment from the wall outlet. Failure to do so may
cause an electric shock and serious personal injury. Read the owner’s
manual of the other equipment carefully and follow the instructions when
making any connections.
22) Sudden high volume sound may cause hearing or speaker damage. When
you use headphones (if the unit is equipped with a headphone jack), keep
the volume at a moderate level. If you use headphones continuously with
high volume sound, it may be cause speaker overheating and fire.
23) Do not allow the product to output distorted sound for an extended period
of time. It may cause speaker overheating and fire.
24) This reminder is provided to call the cable TV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
25) The socket outlet must be installed near the unit and easily accessible.
Page: 8
Important Safety Information
8
CHILD SAFETY:
It Makes A Difference How and Where You Use The TV
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind.
THE ISSUE:
The home theater entertainment experience is a growing trend and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. TVs that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and
cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” TV. Care should be taken to place or install the display where it cannot
be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious children.
Page: 9
Important Safety Information
9
3D HEALTH AND SAFETY
 Should you experience discomfort while viewing 3D video images, take a 10-to-15 minute break or try viewing the video in 2D.
Consult your health care provider, if necessary.
 Due to vision development concerns, Do Not allow children under the age of 6 to view 3D video images. Parents should
supervise children closely to prevent prolonged 3D viewing.
 Keep proper distance from TV while viewing 3D videos or images. Minimum distance between you and the TV screen should be
7 feet. Refer to Section 2: TV Placement for Best 3D Experience for proper TV distance and height from viewing audience.
 For those with epilepsy, have a family history linked to epilepsy, or have experienced epileptic-type symptoms in the past,
consult your health care provider before viewing 3D videos or images.
 Avoid viewing 3D content when under the influence of alcohol.
 Viewing 3D content may cause dizziness and/or disorientation for some viewers. To avoid injury, do not place you the TV at or
near stairwells, balconies, or wires. Clear viewing area of any objects that can break and cause injury when accidentally hit.
Page: 10
Important Safety Information
10
CONDENSATION
Moisture will form in the operating section of the unit of the unit is
brought from cool surrounding into a warm room or if the temperature
of the room rises suddenly. When this happens, unit’s performance
will be impaired. To prevent this, let the unit stand in its new
surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually. Condensation may also
form during the summer if the unit is exposed to the breeze from an air
conditioner. In such cases, change the location of the unit.
HOW TO HANDLE THE LCD PANEL
 Do not press hard or jolt the LCD panel. It may cause the
LCD panel glass to break and injury may occur.
 If the LCD panel is broken, make absolutely sure that you do
not touch the liquid in the panel. This may cause skin
inflammation.
 If the liquid gets in your mouth, immediately gargle and
consult with your doctor. Also, if the liquid gets in your eyes
or touches your skin, consult with your doctor after rinsing for
at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel:
If a fixed (non-moving) pattern remains on the LCD panel for long
periods of time, the image can become permanently engrained in the
LCD panel and cause subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the following formats
or images:
Page: 11
Important Safety Information
11
 Fixed images, such as stock tickers, video game patterns, TV
station logos, and web sites.
 Special formats that do not use the entire screen. For
example: viewing letterbox style (16:9) media on a normal
(4:3) display (black bars at top and bottom of screen); or
viewing normal style (4:3) media on a widescreen (16:9)
display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but
technical limitations
 LCD panels are manufactured using an extremely high level
of precision technology; however, sometimes parts of the
screen may be missing picture elements or have luminous
spots. This is not a sign of malfunction.
 Do not install the TV near electronic equipment that produces
electromagnetic waves. Some equipment placed too near
this unit may cause interference.
 Effect on infrared devices – There may be interference while
using infrared devices such as infrared cordless headphones.
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected
to the TV, make sure that the antenna or cable system is electrically
grounded to provide some protection against voltage surges and static
charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
Page: 12
Important Safety Information
12
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements
of the ground electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is
left unattended or unused for long periods of time, unplug the TV from
the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not located the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits.
Page: 13
Important Safety Information
13
DTV Transition Advisory
As of June 12, 2009, all U.S. television stations have switched to digital
broadcasting. As a result, owners of analog television sets must
connect a digital-to-analog converter box to the television set or
subscribe to cable or satellite TV to receive over-the-air TV. Analog-
only TVs continue to work as before to receive low power, Class A or
translator television stations and with cable and satellite TV services,
gaming consoles, VCRs, DVD players, and similar products.
For more information about the DTV transition, visit www.dtv.gov.
FCC Consumer Center
Email: dtcinfo@fcc.gov
Phone: 1-888-CALLFCC (1-888-225-5322)
Fax: 1-866-418-0232; or writing to:
Federal Communications Commission
Consumer and Governmental Affairs Bureau
Consumer Inquiries and Complaints Division
445 12th
Street, SW
Washington, DC 20554
Page: 14
Setting Up The TV
14
Package Contents
Your JVC Black Sapphire 3D LCD TV is shipped with the items shown
below:
Attaching the Stand
Place TV on a flat surface and the
protective bag. Screen face down.
Attach TV stand to rear of television
with the provided four (4) pan head
screws.
Mount the base to the stand with the
provided three (3) flat head screws
Carefully lift TV up
Page: 15
Setting Up The TV
15
Kensington Lock
Theft Deterrent Kensington Lock
Your JVC TV contains a Kensington Lock-compatible slot/hole that helps
securely affix the TV to other physical objects. The appearance and
locking method differs depending on the manufacturer. Refer to the
manual provided with the Kensington Lock for installation information.
Page: 16
Setting Up The TV
16
Removing The Stand
When television needs to be transported, remove TV Stand and pack
TV back in its shipping box. To remove TV Stand, remove 4 pan head
screws securing stand to rear of television.
Wall Mounting
Installing Wall Mount
A wall mount kit (not included with TV) allows you to mount the TV
onto a wall. For the proper and safe installation of a wall mount, follow
the detailed instructions included in the wall mount kit.
Refer to the specification section for the right wall mount size
For product protection and safety reasons, JVC strongly
recommends contacting a professional installer or
technician for assistance with the installation of the wall
mount and with the setup of your TV. JVC will not be held
responsible for any damage to the product or injury to
yourself and others should you decide to install the wall
mount and TV without the assistance of a professional
installer or technician.
Do not install your TV to the wall mount while the TV is
turned on. It can result in personal injury due to electric
shock.
The TV weighs approximately 54 lb. A minimum of two
people should be used when moving TV, and when
installing TV onto a wall mount.
Page: 17
Setting Up The TV
17
1 Turn off your TV and disconnect all cables.
2 Carefully place the TV face down on a flat, clean, and
padded surface. If available, put TV cover or protective
sheet onto the TV before laying the TV down on flat
surface.
3 Using a cross-tip screwdriver, remove four screws securing
TV stand to rear of TV. Remove TV stand.
4 Follow instructions in wall mount kit and install wall
mount. Install TV onto wall mount in accordance with
wall mount kit instructions.
NOTE: Wall mount screw hole pattern on rear of JLE55SP4000 is VESA
400 x 400mm, with M8 screws
Page: 18
Setting Up The TV
18
Install Batteries Into Remote Control
To open the battery compartment,
press down on top end of cover and
then slide cover down.
Insert two AAA batteries into battery
compartment. Observe correct
polarity.
Insert cover and slide up into place.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation may cause battery
leakage or damage to the remote control.
Always replace batteries in pairs; never combine a used battery with a new
one.
Do not use different battery types together (e.g. Alkaline and Carbon-zinc).
If remote control will not be used for an extended period of time, remove
batteries to prevent battery leakage.
Page: 19
TV Placement For Best 3D Experience
19
How to have the best 3D viewing effect
 Viewing the TV head-on, and place TV around 7 to 10 feet
away from the audience. The best viewing distance is about
9 feet from the screen.
 Make sure the center of TV is aligned to audiences’ line of
sight
Things To Prevent
Weakened 3D effects may be caused by:
 Viewing TV at an angle
 Viewing the TV too close, or too far away
 TV is not aligned to audiences’ line of sight
TV placed on TV stand and aligned to
audiences’ eye level
Use wall mount hardware with tilt
capability. TV is tilted down aligning to
audiences’ eye line
Weakened 3D effects
 Viewing TV at an angle
 Viewing TV too close, or too far away
 TV is not aligned to audiences’ line of sight
Page: 20
Parts and Functions - TV
20
Front and Side Views
Power Button
MENU Button
CH Button
CH Button
VOL+ Button
VOL- Button
INPUT Button
USB Ports
HDMI Ports
3
2
1
1
2
3
Page: 21
Parts and Functions - TV
21
Rear View
COMPONENT VIDEO /COMPOSITE Video Input Jacks
COMPONENT /COMPOSITE Audio Input Jacks
DTV / TV CABLE / ANTENNA Input Jack
PC / MUSIC RGB (PC) Jack
PC / MUSIC PC AUDIO IN Jack
ETHERNET Port
AUDIO OUT Jack
OPTICAL AUDIO OUT Jack
8
7
6
5
4
3
2
1
1 2 3 4 5 6 7 8
Page: 22
Parts and Functions - Remote
22
Remote Control
SLEEP button: When pressed, displays Sleep Timer menu on TV screen.
MULTIMEDIA button: When pressed, displays contents in the USB drive connected
to TV
FAV.CH (Favorite Channel) button:
INPUT button: When pressed, displays Input Source menu on TV screen.
NETFLIX button: When pressed, launches NETFLIX application.
5
4
3
2
1
1
2
3
4
5
Page: 23
Parts and Functions - Remote
23
INFO button: When pressed, displays Info bar at top of TV screen.
OK button: Launches a menu, selects a menu option, and selects on-screen keypad
characters.
BACK button: Returns User to previous TV screen.
ICE (Internet Connected Experience) Apps button: When pressed, displays I.C.E.
application icons on TV screen.
VOL (Volume) button: Increases (VOL ) and decreases (VOL ) TV volume.
MUTE button: When pressed, sets TV audio on or off.
11
10
9
8
7
6
6
10
9
7
8
11
Page: 24
Parts and Functions - Remote
24
LAST button: When pressed, switches back to last channel
-- (dash) button: Serves as dash or decimal point for broadcast channels
Number keypad (0-9): When input source is TV, changes channel. Can be used
when entering numeric values in application log in fields.
CH (Channel) button: When input source is TV, increases and decreases channel
number.
Multipurpose buttons
EXIT button: Used for exiting a menu, application, or mode.
17
16
15
14
13
12
12 13
17
16
15
14
Page: 25
Parts and Functions - Remote
25
Direction buttons: Navigate the menu, select options, or adjust settings value.
MENU button: When pressed, displays TV SETTING menu.
3D button: While viewing 3D contents, press it for 3D/2D control options
WIDE button: When pressed, displays Screen Mode selections on TV screen.
AUDIO ONLY button: When pressed, turns off TV screen but continues to play
audio from input source.
Playback buttons: Used for Music, Video, and HDMI CEC functions.
Power button: When pressed, turns TV on or off.
24
23
22
21
20
19
18
23 22
21
20
19
18
24
Page: 26
Parts and Functions - Remote
26
Direction buttons: Navigate the menu, select options, or adjust settings value.
OK button: Launches a menu, selects a menu option, and selects on-screen keypad
characters.
QWERTY Keypad: Enter log in information such as your Username and Password or
fill in I.C.E. App fields.
27
26
25
25
26 27
Page: 27
Making A/V Connections
27
Page: 28
Making A/V Connections
28
Page: 29
Connecting To The Internet
29
The TV comes equipped with several pre-loaded Internet applications
via a built-in functionality called I.C.E.TM
, or Internet Connected
Experience. To access the pre-loaded I.C.E.TM
applications, the TV must
be connected to the home network. This can be accomplished in two
ways:
 Hard-Wired Ethernet Connection
 Wireless Connection
Making a Hard-Wired Ethernet Connection
To connect your TV to your home network:
1.Connect one end of a CAT 5 Ethernet cable to your home network’s
Ethernet drop box.
2.Connect other end of cable to the Ethernet connector jack at rear of
TV.
3.Follow the instructions on the Network portion of the One Time
Setup Wizard in the Basic Operations section.
Page: 30
Connecting To The Internet
30
Wireless Connection
To connect your TV to your home network via a wireless connection,
follow the instructions on the Network portion of the One Time Setup
Wizard in the Basic Operations section.
Page: 31
One Time Setup Wizard
31
When the TV is turned on for the first time, a one time set-up wizard is
displayed to assist you in setting up your TV.
NOTE: Ensure Antenna or Cable TV input cable is connected to DTV /
TV jack, AND insert provided batteries to remote before proceeding.
Turn on TV. The Welcome screen is displayed.
Use left and right direction arrows on remote control to select desired
language, and then press OK button.
On Viewing Mode screen, select desired TV mode, and then press OK
button.
On Time Zone screen, select desired time zone, and then press OK
button.
Page: 32
One Time Setup Wizard
32
On Network Connection screen, select Network cable or Wi-Fi
connection.
TV will either detect an Ethernet connection or, in the absence of a
wired connection, will search for available wireless networks.
Choose your home wireless network from the list displayed and then
press OK button.
Using the QWERTY keypad on the rear of the remote, enter Password
and then press OK button.
Page: 33
One Time Setup Wizard
33
When using the QWERTY keypad, point the remote to the TV’s IR
receiver lens.
When Wireless Network Connection is ready is displayed, press OK
button.
On TV Signal screen, use left and right direction buttons to select
desired input Source (Antenna or Cable). Use down direction button
to select Start, and then press OK button.
When channel auto scan is completed, click on OK button.
When Thank You screen is displayed, verify settings and then press on
OK button.
Page: 34
Viewing 3D Content
34
Your TV is equipped for viewing 3D movies, games, and television
broadcasts (where available). After installing your TV at the optimum
distance and height for 3D viewing (refer to previous section), you can
then connect your 3D device to the TV. To view 3D content, you will
need the following items:
 A 3D source device, such as a 3D Blu-
Ray player, 3D Game Console, and/or
Cable TV or Satellite TV converter box
that can decode 3D content
 A 3D media, such as Blu-ray 3D movie
disc
 An HDMI connection cable
 XinemaView 3D™ Glasses (included
with TV)
Connecting Your 3D Source Device
Connecting a 3D source device to your TV is very simple:
1.Connect one end of the HDMI cable to the HDMI connector jack on
your device.
2.Connect the other end of the HDMI cable to one of the available
HDMI connector jacks at the rear of you TV.
Page: 35
Viewing 3D Content
35
Start Viewing Your 3D Contents
1. Turn on the TV and wait a few seconds for the TV to boot up.
2. Turn on your 3D source device and insert 3D media (game disc, Blu-
ray disc, etc)
3. The TV will detect the 3D source device and display the following
screen:
4. On remote control, use left/right direction buttons to highlight Yes
on screen, and then press OK button.
5. Put on a pair of 3D glasses and enjoy.
If you wish to view the content in 2D, simply select No and press the
OK button.
Switching between 3D and 2D
You could switch to 2D viewing during any time a 3D content is playing.
Simply press 3D button on remote and choose 2D viewing option
Page: 36
Viewing 3D Content
36
3D HEALTH AND SAFETY
 Should you experience discomfort while viewing 3D video images, take a 10-to-15 minute break or try viewing the video
in 2D. Consult your health care provider, if necessary.
 Due to vision development concerns, Do Not allow children under the age of 6 to view 3D video images. Parents should
supervise children closely to prevent prolonged 3D viewing.
 Keep proper distance from TV while viewing 3D videos or images. Minimum distance between you and the TV screen
should be 7 feet. Refer to Section 2: TV Placement for Best 3D Experience for proper TV distance and height from
viewing audience.
 For those with epilepsy, have a family history linked to epilepsy, or have experienced epileptic-type symptoms in the
past, consult your health care provider before viewing 3D videos or images.
 Avoid viewing 3D content when under the influence of alcohol.
 Viewing 3D content may cause dizziness and/or disorientation for some viewers. To avoid injury, do not place you the
TV at or near stairwells, balconies, or wires. Clear viewing area of any objects that can break and cause injury when
accidentally hit.
Page: 37
I.C.E™ Apps Operation
37
ICE Apps and Multimedia Operations
The TV equipped with I.C.E™ (Internet Connected Experience) platform
which provides connectivity to popular internet content streaming
services.
To access any of the pre-loaded ICE applications, make sure the TV is
connected to the Internet.
On the remote, press the ICE Apps button to display the ICE
applications screen.
Use the left and right direction buttons to bring the desired app icon to
the middle of the screen, and then press the OK button to select the
application. Follow the instruction on screen to setup* each application.
To exit an application, press the Exit button on remote.
USB Multimedia control
Control multimedia content stored in your USB drive by choosing this icon, or
press MULTIMEDIA button on remote
Page: 38
I.C.E™ Apps Operation
38
NOTE:
 ICE apps are software provided by the content provider.
 You would need to either sign up or use an existing account to use
the selected ICE apps.
 Some apps are free, but some may charge monthly fee or pay-per-
view fee. Read through the service terms for each app. Contact
the content provider for any question regarding their service.
Page: 39
TV Operation – TV Channels
39
Changing the Channel
On the remote control, use the number keys to select a channel.
NOTE: When a channel is selected with the number keys, there will be
a short delay before the TV changes the channel. To change the
channel immediately, press OK after selecting a channel.
Browsing Channels
To increase or decrease the channel:
1 On the remote control, press button
2 At rear of TV, press the CHANNEL UP or CHANNEL DOWN buttons
Selecting Analog Channels
1~9 Press 1~9 as needed. For example: to select
channel 2, press 2, then press OK.
10~99 Press the 2 digits in order. For example: to select
channel 15, press 1, 5, and then press OK.
100~135 Press the 3 digits in order. For example: to select
channel 130, press 1, 3, 0, and then press OK.
Selecting Digital Channels
Press the first two or three digits, press the – button, and then press
the remaining digit(s). For example: to select channel 15-1, press 1, 5, -
,.1, and then press OK.
Page: 40
TV Operation – TV Channels
40
Selecting by Channel List
All channels with network signal are listed on the Channel List screen.
You can select channels from this screen.
1 Press OK to display Channel List screen.
2 Press up or down direction buttons to select a channel number,
and then press OK.
3 Press Exit to close Channel List screen.
Mute
Press the Mute button to turn off the sound. To turn on the sound,
press the Mute button again.
Setting the Sleep Timer
Use the Sleep timer to automatically turn off the TV after a preset
amount of time has elapsed.
1 Press Sleep button to display Sleep Timer screen.
2 Press Sleep button repeatedly, or use up and down direction
buttons to select desired sleep time, and then press OK.
To cancel sleep mode, select Timer Off on Sleep Timer screen, and then
press OK.
Page: 41
TV Operation – Aspect Ratio
41
Set Aspect Ratio
1 Press Wide button to display Screen Mode display.
2 Press Wide button repeatedly, or use left and right direction
buttons to select desired screen mode, and then press OK.
Normal
When watching a 4:3 content,
the TV displays a standard
picture with black side bars.
When viewing a 16:9 content, it
displays a full picture.
Wide
When displaying a 4:3 content,
the picture is stretched
horizontally to fill the width of
the screen. When watching a
16:9 content, the image is slightly
overscanned.
Zoom
The entire picture is uniformly
enlarged to retain its original
proportion. However, some parts
of the picture may be hidden.
Stretch
The picture is stretched
horizontally on the left and right
sides. Only available in 16:9
content.
Page: 42
TV Operation – Aspect Ratio
42
Panoramic
The picture is stretched
horizontally on the left and right
sides to fill the width of the
screen. The center of the picture
is not stretched.
With VGA input, only two modes are available: Normal and Stretch.
Normal
When watching a 4:3 content,
the TV displays a standard picture
with black side bars. When
viewing a 16:9 content, it displays
a full picture.
Stretch
When watching 4:3 content, the
picture is stretched horizontally
to fill the width of the screen.
When watching a 16:9 content,
the picture is stretched
horizontally on the left and right
sides.
Notes:
 Panoramic mode is only available on 4:3 contents.
 Stretch is only available in 16:9 contents.
Page: 43
TV Operation – Input Sources
43
Selecting the Input Source
The TV provides various ways to select the input source:
At rear of TV
Press INPUT button repeatedly to scroll through the input source
options. The highlighted input source is selected after a few seconds.
Using the Remote Control
Press Input button repeatedly to scroll through input source options,
and then press OK button to select desired input source.
Multimedia Mode
Depending on your TV model, the TV allows you to play slide shows or
display photos from a USB memory stick.
Playing Multimedia Files
1 Insert USB memory stick into one of the USB slots at rear of TV.
2 When USB media detected screen appears, select Yes and press
OK.
3 When Multimedia Player screen is displayed, select USB source on
left side of screen, and then press OK.
4 To exit the Multimedia Player, press the Exit button.
Connecting Music
The TV supports music playback from portable music players such as
iPods and various MP3 players.
1 Connect one end of an audio cable to the PC Audio In port of the
TV and the other end to the Audio Out port of the music player.
Page: 44
TV Operation – Input Sources
44
2 Press INPUT button and select MUSIC
Audio Only Mode
While playing music, you can set the TV to Audio Only mode to turn off
the TV display and save power.
1 Press AUDIO ONLY button to activate Audio Only mode. A
message appears on the screen and few seconds later, the TV
display turns off.
2 When ready to exit Audio Only mode, press any button.
Page: 45
Advanced TV Settings – Video Menu
45
Quick Menu Operation Remote Control TV Panel
Display the
menu
Press MENU button Press MENU button
Select a TV
Setting
Press up or down to select a
TV Setting.
Press OK to confirm your TV
Setting selection.
Press CH+ or CH- buttons to
select a TV Setting.
Press INPUT button to
confirm your TV Setting
selection.
Select and
Adjust a TV
Setting Option
Press up or down to select a
TV Setting Option.
Press left or right to adjust
the setting.
Press OK to apply the
adjustment.
Press CH+ or CH- buttons to
select a TV Setting Option.
Press VOL+ or VOL- buttons
to adjust the setting.
Press INPUT button to apply
the adjustment.
Exit the Menu Press EXIT button. Press MENU button.
Page: 46
Advanced TV Settings – Video Menu
46
Picture Menu
Adjust picture options such as brightness, contrast, and advanced
picture settings.
Picture Mode
Select the picture mode.
Standard For standard picture settings
Movie For motion pictures such as movies
Game For fast and dynamic pictures suitable with
playing games.
Vivid For bright and vivid picture setting.
Sport Suggested settings for sporting events.
Custom For custom picture settings.
Backlight
Adjust the backlight that affects the overall brilliance of the picture
(0~100).
Page: 47
Advanced TV Settings – Video Menu
47
Contrast
Adjust the white level in the picture. Low contrast makes pictures look
dark. High contrast makes pictures washed out (0~100).
Brightness
Adjust the brightness setting (0~100).
Color
Adjust the amount of color level in the picture (0~100).
Tint
Adjust the picture hue (-50~50).
Sharpness
Adjust the sharpness of the edges of elements in the picture.
Adaptive Backlight
Set Adaptive Backlight On or Off
Ambient Light Sensor
Select the sensitivity of the ambient light sensor to automatically adjust
to light changes in the room (Off / Low / Medium / High).
Color Temperature
Color Temperature Apply a preset color temperature setting
(Custom / Cool / Natural / Warm)
Red / Green / Blue
Gain
Adjust the red / green / blue gain settings
according to your preference.
Red / Green / Blue
Offset
Adjust the red / green / blue offset settings
according to your preference.
Advanced Settings
Page: 48
Advanced TV Settings – Video Menu
48
Crystal Color Crystal ColorTM
produces more vivid and
crisp color pictures (Off / Normal / Rich).
Dynamic Contrast Dynamic contrast automatically enhances
the image for greater picture details (Off /
Low / Medium / High).
Noise Reduction Reduce the noise level (Off / Low / Medium
/ High).
Digital NR Reduce noise level of digital signals (Off /
Low / Medium / High).
Game Mode Eliminate image lagging by disable TV
images processing
Film Mode Produce smoother motion pictures when
viewing movies from video players
connected via HDMI (Off / Auto).
Size & Position
Horiz. Position /
Vertical Position
Adjust the horizontal / vertical position of
the picture.
Horizontal Size /
Vertical Size
Adjust the horizontal / vertical size of the
picture.
Reset Picture Mode
Reset the picture mode settings to factory defaults.
Page: 49
Advanced TV Settings – Audio Menu
49
Audio Menu
XinemaSoundTM
3D
Expansive and immersive, multi-
dimensional surround sound
experience.
When XinemaSound™ 3D is on, Bass,
Treble and Equalizer Settings functions will
not be available for adjustment
XinemaSoundTM
Leveler
Delivers smooth, steady volume
levels from the quietest sound to the loudest volume with exceptional
audio clarity.
Bass
Adjust the bass level to your preference (-12~12).
Treble
Adjust the treble level to your preference (-12~12).
Balance
Adjust the audio level of the L/R channels of the speakers to your
preference (-10~10).
Lip Sync
Adjust to match the movements and the lips of the person talking on
the screen (0~5).
TV Speakers
Turn the internal speakers on or off.
Digital Audio Out
Select the type of digital audio output (Off / Dolby Digital / PCM).
Page: 50
Advanced TV Settings – Audio Menu
50
Analog Audio Out
Select the type of analog audio output (Fixed / Variable)
Equalizer Settings
Adjust the equalizer settings (120Hz / 500Hz / 1.5KHz / 5KHz / 10KHz)
Reset Audio Mode
Reset the audio mode settings to default
settings.
Channel Menu
Channel Mode
Select the TV channel input source
(Antenna or Cable).
Auto Scan
The TV is equipped with a channel memory. When you run auto scan,
the TV scans for channels with network signals and stores them in
memory. It may take up to 15 minutes for the TV to scan and
memorize digital cable channels, depending on reception conditions.
Partial Scan
You can partially scan for network signals within a specified range of
channels. Select the Channel Mode (Analog+Digital / Analog / Digital)
and range of channels you want the TV to scan for.
Channel Edit
You can mark the channel as favorite or blocking a channel
MTS
You can choose different audio channel available in MTS (Multichannel
Television Sound) encoded programs

Question & answers

There are no questions about the JVC JLE55SP4000 yet.

Ask a question about the JVC JLE55SP4000

Have a question about the JVC JLE55SP4000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the JVC JLE55SP4000. Please make sure that you describe your difficulty with the JVC JLE55SP4000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.