JVC CU-VD10 manual

View a manual of the JVC CU-VD10 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: JVC
  • Product: DVD player
  • Model/name: CU-VD10
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Polish, Danish, Norwegian, Finnish, Hungarian

Table of Contents

Page: 0
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ESPAÑOL
ITALIANO
DANSK
SUOMI
SVENSKA
NORSK
ÓÒÔÔËÊÁ
ČEŠTINA
POLSKI
MAGYAR
PORTUGUÊS
CU-VD10
U/E/ER/EK/AA/AG/AC/AS/KR/TW
LYT1571-001B
For Customer Use:
Enter the Model No. and Serial
No. (located on the bottom of the
burner) below. Retain this
information for future reference.
Model No.
Serial No.
DVD Burner
INSTRUCTIONS
DVD-Brenner
BEDIENUNGSANLEITUNG
Graveur de DVD
MANUEL D’UTILISATION
DVD-brander
GEBRUIKSAANWIJZING
Grabador de DVD
MANUAL DE INSTRUCCIONES
Masterizzatore di DVD
ISTRUZIONI
DVD-brænder
INSTRUKTIONSBOG
DVD-tallennin
KÄYTTÖOHJE
DVD-brännare
BRUKSANVISNING
DVD-brenner
BRUKSANVISNING
²−¦¹ŞŁ˛ćğšš=³¹²×þй²Łþ=
ŠÝČ=Š¦¹ðþŁ=asa
ÊÎÔÒÓÒËÙÊ˝=ÌÏ=˚ËÔÌÈÒfiÒfiÙÊÊ
Vypalovací jednotka DVD
PŘÍRUČKA K OBSLUZE
Nagrywarka DVD
INSTRUKCJA OBSŁUGI
DVD-író
HASZNÁLATI UTASĺTÁSA
Gravador de DVD
INSTRUÇÕES
DVD 버너
사용 설명서
DVD 刻录机
使用说明书
DVD 燒錄器
CU-VD10_Cov1.fm Page 1 Thursday, April 13, 2006 6:30 PM
Page: 1
2 EN
This burner enables DVDs of videos recorded with the JVC
Hard Disk Camera to be created without using a PC.
● If you want to edit videos recorded with the camera and create
your original DVDs, use the software provided with the camera for
editing and creating DVDs.
● The provided data writing software Power2Go 4 can be used for
writing data. However, it cannot be used to edit videos or create
DVDs.
● The burner does not include support for Macintosh.
SOME DO’S AND DON’TS ON THE SAFE USE OF
EQUIPMENT
This equipment has been designed and manufactured to meet
international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and safety
is to be assured.
DO read the operating instructions before you attempt to use the
equipment.
DO ensure that all electrical connections (including the mains plug,
extension leads and interconnections between pieces of
equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains plug
when making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt
about it working normally, or if it is damaged in any way — switch
off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended unless
it is specifically stated that it is designed for unattended operation
or has a standby mode. Switch off using the switch on the
equipment and make sure that your family knows how to do this.
Special arrangements may need to be made for infirm or
handicapped people.
DON’T use equipment such as personal stereos or radios so that
you are distracted from the requirements of road safety. It is illegal
to watch television whilst driving.
Dear Customer,
Thank you for purchasing this burner. Before use, please read
the safety information and precautions contained in pages 2 and
3 to ensure safe use of this product.
Safety Precautions
IMPORTANT:
In the event that any of the following occur, remove the plug and make
a request for repair to the dealer.
● Smoke or abnormal odor is emitted
● Damage from being dropped
● Water or an object enters inside
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT
USES A VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO
OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT
PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY
AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS
UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
This unit applies to the standard “IEC60825-1:2001” for laser
products.
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch the unit
off and unplug the mains power cord. Then plug it in again and turn the
unit on. Take out the disc. After checking the disc, operate the unit as
usual.
CAUTION:
To avoid electric shock or damage to the unit,
first firmly insert the small end of the power cord
into the AC Adapter until it is no longer wobbly,
and then plug the larger end of the power cord
into an AC outlet.
If malfunctioning occurs, stop using the unit immediately and consult
your local JVC dealer.
Declaration of Conformity (for owners in the U.S.A.)
Model Number : CU-VD10U
Trade Name : JVC
Responsible party : JVC AMERICAS CORP.
Address : 1700 Valley Road Wayne, N. J. 07470
Telephone Number : 973-317–5000
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
(For owners in the U.S.A.)
Changes or modifications not approved by JVC could void the user’s
authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
(For owners in Canada)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
Information
for
Users
on
Disposal
of
Old
Equipment
[European Union]
This symbol indicates that the electrical and
electronic equipment should not be disposed
as general household waste at its end-of-life.
Instead, the product should be handed over to
the applicable collection point for the recycling
of electrical and electronic equipment for
proper treatment, recovery and recycling in
accordance with your national legislation.
By disposing of this product correctly, you will
help to conserve natural resources and will
help prevent potential negative effects on the
environment and human health which could
otherwise be caused by inappropriate waste handling of this product.
For more information about collection point and recycling of this
product, please contact your local municipal office, your household
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page
www.jvc-europe.com to obtain information about the take-back of the
product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
Attention:
This symbol is only
valid in the European
Union.
CU-VD10.book Page 2 Thursday, February 9, 2006 6:09 PM
Page: 2
EN 3
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with
curtains or soft furnishings. Overheating will cause damage and
shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood
screws — to ensure complete safety always fit the manufacturer’s
approved stand or legs with the fixings provided according to the
instructions.
DON’T allow electrical equipment to be exposed to rain or
moisture.
ABOVE ALL
● NEVER let anyone especially children push anything into holes,
slots or any other opening in the case — this could result in a fatal
electrical shock;
● NEVER guess or take chances with electrical equipment of any
kind — it is better to be safe than sorry!
Safety Precautions for the Burner
Be sure to observe the following precautions. Failing to do so may
result in electric shock, fire, injury, or malfunction.
● Do not disassemble, dismantle, or modify the equipment.
Requests for repair and inspection should be made to the dealer.
● Do not insert metal or easily burnable objects or pour water or
other liquids inside the burner.
● Turn off the power when connecting equipment.
● Remove the plug when the burner will not be used for a
prolonged time or prior to cleaning (electricity flows through the
equipment even when the power is off).
● Do not block the ventilation holes of the burner.
● Do not use where there is condensation. Suddenly carrying the
burner from a cold location to a hot location may result in the
formation of drops, which may cause a malfunction or failure.
● Do not cause the burner to vibrate when discs are in.
Safety Precautions for Accessories
● When using the AC adapter, the power cord, and the USB cable,
be sure to observe the following precautions. Failing to do so may
result in electric shock, fire, injury, or malfunction.
• Do not insert or remove the plug when your hands are wet.
• Fully insert the plug into the outlet.
• Keep dust and metal objects away from the plug.
• Do not damage the cord.
• Place the cord where it will not trip someone up.
• Do not use when thunder can be heard.
• Do not dismantle.
• Do not use for any product other than this one.
● Do not play the provided CD-ROM with an audio player. Doing so
may damage the circuits or speakers.
Safety Precautions for Discs
Do not use the following discs.
● Cracked discs.
● Deeply scratched discs
Installation
Do not install in any of the following locations.
● Humid location
● Location of 60°C or above
● Location subject to direct sunlight
● Location where overheating is likely
● Dusty or smoky locations
● Locations subject to oily smoke or steam such as a kitchen
counter or beside a humidifier
● Unstable location
● Bathroom
● Dusty places
● Slanted location
Do not place the equipment vertically. This burner is only for
transversely used.
Cleaning Procedure
IMPORTANT:
● Be sure to unplug the burner before beginning cleaning.
● Do not use liquid or aerosol cleaners.
● Ensure that no moisture or liquid comes into contact with the
drive during cleaning.
Exterior of the Burner:
Wipe dirt off with a dry cloth.
Disc Tray:
Wipe off dirt with a soft dry cloth.
Disc:
Gently wipe from the inner edge to
the outer edge with a soft cloth.
How to handle discs:
When handling a disc, do not touch
the surface of the disc.
Storage:
Make sure that discs are kept in
their cases. If discs are piled on top
of one another without their
protective cases, they can be damaged. Do not put discs in a
location where they may be exposed to direct sunlight, or in a place
where the humidity or temperature is high. Avoid leaving discs in
your car!
Region Codes
Region codes are numbers for restricting DVD video playback. The
world is separated into six regions and each region is identified by
a number. If the number for a disc does not match the number for
the player, the disc cannot be played on the player. (The initial
region code is indicated on the label on the bottom of the burner.)
Disclaimer
JVC accepts no liability whatsoever for loss of data resulting from
inappropriate connections or handling.
Copyrights
Duplicating copyright protected material, for other than personal
use, without the permission of the copyright holder is prohibited by
copyright law.
Registered Trademarks and Trademarks
● Windows®
is either registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
● Other company and product names mentioned herein are
registered trademarks and/or trademarks of their respective
holders.
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in your home or the
cable is too short to reach a power point, then obtain an appropriate
safety approved extension lead or consult your dealer.
In the unlikely event of the plug fuse failing be sure to replace the
fuse only with an identical approved type, as originally fitted, and
to replace the fuse cover. If the fuse fails again consult your
nearest JVC dealer.
If nonetheless the mains plug is cut off be sure to remove the fuse and
dispose of the plug immediately, to avoid possible shock hazard by
inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then follow the
instructions given below:
DO NOT make any connection to the Larger Terminal coded E or
Green.
The wires in the mains lead are coloured in accordance with the
following code:
If these colours do not correspond with the terminal identifications of
your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.
Blue to N (Neutral) or Black
Brown to L (Live) or Red
Changing the region codes
You can change the region code to play a DVD that has a different
code. (The code cannot be changed for some playback software.)
When you insert the disc, the Caution screen appears. Follow the
on-screen instructions to change the code.
The region code for the burner can be changed 4 times only. The
code set the fourth time becomes the final code, so be sure to set
a frequently used code. Take sufficient care when changing the
code.
CU-VD10.book Page 3 Thursday, February 9, 2006 6:09 PM
Page: 3
4 EN
NOTE:
Hooks for store display may be attached to the rear of the CU-
VD10U. Do not use the hooks for other than display purposes.
Accessories
AC Adapter Power Cord USB Cable
CD-ROM Blank Disc
Guide to Parts and Controls
a Disc Tray
b Power Lamp
c Eject Button
d Power Switch
e USB Connector
f DC Connector
Front
Rear
For general
When connected to the camera
When connected to a PC
Recommended discs
Interface cable
AC adapter
Specifications
Power supply DC 12 V
Power consumption (during data transfer) Approx. 5.2 W
Dimensions of main unit (W x H x D) 161 x 58 x 237 mm (6-3/8" x 2-5/16" x 9-3/8")
Weight of main unit Approx. 1.4 kg (3.1 lbs)
Operating temperature 0°C to 40°C (32°F to 104°F)
Operating humidity 35% to 80%
Storage temperature –20°C to 50°C (–4°F to 122°F)
Laser Power
For DVD
Wavelength 653 to 663 nm
Output 1.0 mW
For CD
Wavelength 770 to 870 nm
Output 0.4 mW
Interface High Speed USB 2.0
Supported discs DVD-R (2x to 16x), DVD-RW (2x to 4x)
Recording format DVD video
Writing speed 2x (for all discs)
Recording time (for each 4.7 GB disc) Approx. 30 minutes (approx. 1 hour of video recorded in ultra fine mode)
Interface cable Provided USB cable
Interface High Speed USB 2.0
Writing speed
(for USB 2.0)
Writing
DVD-R/RW (2x) Only 2x
DVD-R/RW (4x) Select from 2x/4x
DVD-RW (6x) Only 4x
DVD-R (8x or more) Select from 2x/8x
Reading
DVD-R 8x (5x finalized)
DVD-RW/ROM 5x
CD-R/RW/ROM 10x
Supported disc
DVD
Writing DVD-R, DVD-RW
Reading DVD-ROM, DVD-VIDEO, DVD-R, DVD-RW
CD Reading CD-ROM, CD-DA, CD Extra, Video-CD, Mixed-CD, CD-R, CD-RW
Supported operating systems Windows® XP Home Edition/Professional
Windows®
2000 Professional with Service Pack 4 (pre-installed)
Interface cable USB cable provided with the camera
Supported software
CyberLink PowerProducer 3 NE (Authoring)
CyberLink Power2Go 4 (data writing)
DVD-R JVC, TDK, Verbatim, SONY
DVD-RW JVC
Mini USB type A and type B, USB 1.1 and 2.0 compliant
Power requirement AC 100 V to 240 Vd, 50 Hz/60 Hz
Output DC 12 V , 4 A
NOTES:
● Both 8 cm and 12 cm discs can be used, but 8 cm discs can only be used
when the burner is connected to a PC.
● A double-layer disc cannot be used while the burner is connected to a PC
or camera.
● Optimal performance of the burner may not be possible depending on the
disc used. Using discs of manufacturers for which compatibility has been
confirmed is recommended.
● The appearance and specifications of the product may change without
notice.
● Any CD recorded using the packet-write method cannot be played.
● Operation is not guaranteed for any CD not compliant with the CD-DA
standard (copy control CD).
● DVD-RW 6x media cannot be used with the camera.
CU-VD10.book Page 4 Thursday, February 9, 2006 6:09 PM
Page: 4
EN 5
Connections
OFF ON
USB Cable
AC Adapter
(provided for the burner)
Power Cord
To AC Outlet
AC Adapter
(provided for the camera)
To DC Connector
To DC Connector
To USB Connector
To USB Connector
Hard Disk Camera
Rear face of the
burner
Connecting to the Camera
Make sure the power switch of the burner is off.
Connect the AC adapter to the burner.
Connect the power cord to the AC adapter.
Connect the power cord to an AC outlet.
Connect the provided USB cable to the USB connector of the burner.
Connect the camera to an AC outlet. (墌 Refer to the instruction manual for the camera.)
Turn on the camera.
Turn on the burner. The light on the front of the burner lights in green.
Connect the provided USB cable to the USB connector of the camera.
NOTES:
● Insert a disc after [INSERT DISC] is displayed on the camera.
● Be sure to use the provided USB cable to connect the burner and the camera.
● When using a camera, make sure the power is provided with the AC adapter, not the battery.
● Do not subject the camera or burner to vibration or mechanical shock while writing to a disc. Be especially careful if the camera is placed on the
burner during writing.
● Refer to “Dubbing Video Files To DVD Discs” in the manual for writing discs.
● The DVD discs that are written with this unit cannot be played with some DVD recorders/players. In that case, use [PLAY DVD] of the camera to
playback discs.
Connecting to PC
Make sure the power switch of the burner is off.
Connect the AC adapter to the burner.
Connect the power cord to the AC adapter.
Connect the power cord to an AC outlet.
Turn on the burner.
The light on the front of the burner lights in green.
Turn on the PC.
Connect the burner to the PC with the USB cable.
NOTE:
To connect the burner to a PC, use the USB cable provided with the camera.
USB Cable
(provided for the camera)
AC Adapter
(provided for the burner)
Power Cord
CU-VD10.book Page 5 Thursday, February 9, 2006 6:09 PM
Page: 5
6 EN
Power2Go 4 is software for writing video, image, audio, and other
data files to data DVDs.
System Requirements
The following shows the system requirements for installation.
* If you use USB1.1 cable, it will take approximately 3 hours to write.
Installation Procedure
1. Insert the installation CD-ROM in the CD-ROM drive.
2. The language selection screen appears.
3. The setup screen appears and then the installation start
screen appears.
Click [Next].
4. Enter the user information and then click [Next].
Follow the on-screen instructions.
5. Installation starts.
6. The following screen appears when the installation is
complete.
Select the desired checkboxes and then click [Finish].
● It is recommended to select [Register now].
The installation is now finished.
NOTES:
● The above procedure is just a brief explanation on installing the
software. For details on operating Power2Go 4, refer to the User’s
guide, Help, and ReadMe installed at the same time as the software.
You can view the User's guide, Help, and ReadMe from the start menu
of the PC.
● This product does not apply to write files into CD-R or CD-RW. Also, it
is not responded to all the functions of Power2Go 4.
Writing Software — CyberLink Power2Go 4 —
Operating
system
Windows®
2000 Professional SP4 [2000] (pre-
installed), Windows®
XP Home Edition [XP] (pre-
installed), or Windows®
XP Professional [XP] (pre-
installed)
CPU
Intel® Pentium® III, at least 800 MHz
(Intel® Pentium® 4, at least 2 GHz recommended)
Free hard disk
space
At least 50 MB for installation
At least 5 GB recommended for making DVDs
RAM At least 128 MB (at least 256 MB recommended)
Connector USB 2.0/1.1* connector
Display Must be capable of displaying 800 x 600 dots
CyberLink Power2Go 4 Contact Information
For information on CyberLink Power2Go 4 or other products, use the following contact information.
Telephone/fax support
Paid voice support
Support web/e-mail
Location Language Office hours (Mon. to Fri.) Phone # Fax #
Germany English / German / French /
Spanish / Italian / Dutch
9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25
Taiwan Mandarin 9:00 am to 6:00 pm +886-2-8667-1298
ext. 333
+886-2-8667-1300
Location Language Lines are open (Mon. to Fri.) URL
U.S.A. English 1:00 pm to 10:00 pm CST http://www.cyberlink.com/english/cs/support/
new_site/voice_support.jsp
Language URL/e-mail address
English http://www.cyberlink.com/english/cs/support/new_site/support_index.html
German / French / Spanish / Italian goCyberlink@aixtema.de
CU-VD10.book Page 6 Thursday, February 9, 2006 6:09 PM
Page: 6
EN 7
If you think there is a malfunction, first check the following items. If you are still unable to solve the problem, consult your local JVC dealer.
Force Eject Lever
If a disc cannot be ejected with the eject button because of a malfunction caused by a power cut or the burner being dropped, use this lever
to eject the disc.
Troubleshooting
Trouble Cause/Action
Cannot turn the power on. ● Make sure the AC adapter is connected properly.
● Make sure the power switch is turned on.
The camera/PC is not recognized. ● Make sure the USB cable is connected properly.
The burner or AC adapter is hot. ● This is not a malfunction. If the burner is abnormally hot, remove the AC adapter and consult the
dealer from which you purchased the burner.
Cannot open the disc tray. ● A disc cannot be ejected by pressing the eject button if data is being written to the disc. Wait until
writing finishes.
● If a disc cannot be ejected with the eject button because of a failure or a malfunction caused by,
for example, the burner being dropped, use the force eject lever to eject the disc. (See below.)
Writing fails. ● Make sure an appropriate disc is being used. (墌 pg. 3, 4)
● Use discs recommended for the burner. (墌 pg. 4)
● Insert the disc with the label facing up.
● Make sure the writing surface of the disc is not damaged.
● Make sure the disc tray is not dirty.
● Writing to irregularly shaped discs such as heart-shaped discs or octagonal discs is not possible.
● Check the writing speed of the disc being used.
Reading fails. ● Insert the disc with the label facing up.
● Make sure the writing surface of the disc is not damaged.
● Writing to irregularly shaped discs such as heart-shaped discs or octagonal discs is not possible.
● Any CD recorded using the packet-write method cannot be played.
● Any CD that does not comply with standards such as the CD-DA standard (copy-control CDs)
cannot be played.
Writing/reading at maximum speed
is not possible.
● Reading at maximum speed may not be possible if a nonstandard disc is used.
● Use discs recommended for the burner. (墌 pg. 4)
Commercial DVDs cannot be played
when the burner is connected to PC.
● Check the region code. (墌 pg. 3)
It is impossible to dub the DVD discs,
which were written with this burner,
with DVD recorder with HDD.
● Connect the burner to the camera, playback using [PLAY DVD] function of the camera, and dub
the DVD discs with the DVD recorder.
(Refer to “Connecting to a TV, VCR or DVD Recorder” or “Using a DVD Burner for Dubbing” in the
camera's manual.)
Procedure
Use a Phillips screwdriver to open the cover at the bottom.
Move the lever inside from the right to the left.
CU-VD10.book Page 7 Thursday, February 9, 2006 6:09 PM
Page: 107
6 中文繁體
Power2Go 4 是一套燒錄軟體,可將影像、圖片、聲音以及其他資
料檔案燒錄至資料 DVD 光碟片中。
系統需求
下列為產品安裝的系統需求。
* 若您使用 USB1.1 訊號線,將需要約 3 小時進行燒錄。
安裝程序
1. 請將 CD-ROM 安裝光碟放入 CD-ROM 光碟機。
2. 出現語言選項畫面。
3. 出現安裝螢幕畫面以及安裝開始畫面。
按一下 [ 下一步 ]。
4. 輸入使用者資訊,接著按一下 [ 下一步 ]。
請遵循螢幕說明。
5. 開始安裝。
6. 安裝完成時,會出現下列螢幕。
勾選需要的勾選欄,接著 [ 完成 ]。
● 建議選取 [ 現在註冊 ]。
安裝完成。
註 :
● 上述程序為軟體安裝之概要說明。若想要了解 Power2Go 4 操作詳細說
明,請參考您安裝軟體的使用手冊、Help、以及 ReadMe。您可以瀏
覽電腦 [ 開始 ] 選單的使用手冊、Help、以及 ReadMe。
● 本產品無法將檔案燒錄至 CD-R 或 CD-RW 光碟片。此外,也不適用
Power2Go 4 的所有功能。
CyberLink Power2Go 4 連絡窗口
若想了解 CyberLink Power2Go 4 或其他產品資訊,請參考下列聯絡人資訊。
電話 / 傳真連絡
付費專線支援
網路 /e-mail 聯絡窗口
寫入 (燒錄)軟體 — CyberLink Power2Go 4 —
作業系統
Windows®
2000 Professional SP4 [2000] (系統安
裝)
、Windows® XP Home Edition [XP] (系統安
裝)
、或 Windows® XP Professional [XP] (系統安
裝)
CPU Intel® Pentium® III,至少 800 MHz
(Intel®
Pentium®
4,建議至少 2 GHz)
可用的硬碟空間
至少 50 MB 安裝空間
建議至少 5 GB 空間燒錄 DVD 光碟片
RAM 至少 128 MB (建議至少 256 MB)
連接器 USB 2.0/1.1* 連接器
顯示器 必須能夠顯示 800 x 600 點陣圖
區域 語言 上班時間 (週一至週五) 電話號碼 傳真號碼
德國 英語 / 德語 / 法語 /
西班牙語 / 義大利語 / 荷蘭語
早上 9:00 至下午 5:00 +49-700-462-92375 +49-241-70525-25
台灣 中文 早上 9:00 至下午 6:00 +886-2-8667-1298
分機 333
+886-2-8667-1300
區域 語言 專線開放時間 (週一至週五) 網址 (URL)
美國 英語 下午 1:00 至下午 10:00
(美中標準時間)
http://www.cyberlink.com/english/cs/support/
new_site/voice_support.jsp
語言 網址 /e-mail 位址
英語 http://www.cyberlink.com/english/cs/support/new_site/support_index.html
德語 / 法語 / 西班牙語 / 義大利語 goCyberlink@aixtema.de
CU-VD10_Instruction_CT.fm Page 6 Thursday, February 9, 2006 7:03 PM
Page: 109
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
CU-VD10.book Page 2 Thursday, February 9, 2006 6:09 PM
Page: 110
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
.........................................................................................................................................................................................................................
CU-VD10.book Page 3 Thursday, February 9, 2006 6:09 PM
Page: 111
Printed in China
0406NSH-AL-BJ
© 2006 Victor Company of Japan, Limited
CU-VD10_Cov4.fm Page 1 Thursday, April 13, 2006 6:38 PM

Question & answers

There are no questions about the JVC CU-VD10 yet.

Ask a question about the JVC CU-VD10

Have a question about the JVC CU-VD10 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the JVC CU-VD10. Please make sure that you describe your difficulty with the JVC CU-VD10 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.