JVC AA-V15U manual

View a manual of the JVC AA-V15U below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: JVC
  • Product: Battery charger
  • Model/name: AA-V15U
  • Filetype: PDF
  • Available languages: English, French

Table of Contents

Page: 0
For Customer Use:
Enter below the Serial No. which is located
on the bottom of the unit.
Retain this information for future reference.
Model No. AA-V15U
Serial No.
AA-V15U
INSTRUCTIONS
AC POWER ADAPTER/CHARGER
ADAPTATEUR SECTEUR/CHARGEUR DE BATTERIE
LYT0206-001A
MANUEL D’INSTRUCTIONS
ENGLISH
FRANÇAIS
Page: 1
EN-2
Thank you for purchasing the JVC AA-V15U AC
Power Adapter/Charger. This unit provides DC
power for the JVC Video Camera from a household
AC outlet. It can be used to recharge or discharge
the JVC battery pack for exclusive use with the JVC
Video Camera. To avoid problems and obtain the
best results, please read this instruction booklet
carefully before use.
NOTE:
The rating plate (Serial number plate) is on the
bottom of the unit.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit should be used with AC 120V`
`
`
`
`, 60 Hz
only in the USA and Canada. In other countries,
this unit should be used with AC 110 – 240 V`
`
`
`
`,
50/60 Hz only.
CAUTION:
To prevent electric shocks and fire hazards, do
NOT use any other power source.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Page: 2
EN-3
USING HOUSEHOLD AC PLUG ADAPTER
In case of connecting the unit’s power cord to an
AC wall outlet other than American National
Standard C73 series type use an AC plug adapter,
called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest
JVC dealer.
CAUTIONS:
•If used near a radio, this unit may interfere with
reception.
•Prevent inflammables, water and metallic
objects from entering the unit.
•Do not disassemble or modify the unit.
•Do not apply shocks to the unit.
•Do not subject the unit to direct sunlight.
•Avoid using the unit in extremely hot or humid
places.
•Avoid using the unit in places subject to
vibrations.
A WORD ON THE EXCLUSIVE BATTERY PACKS
The battery packs are nickel-cadmium batteries
and nickel-metal hydride batteries.
Give attention to the following to make the most
of their characteristics.
For charging: 10°C to 35°C (50°F - 95°F)
For operating: 0°C to 40°C (32°F - 104°F)
For storing: –10°C to 30°C (14°F to 86°F)
This Class B digital apparatus complies with
Canadian ICES-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Plug adapter
Page: 3
EN-4
CHARGING THE BATTERY PACK
SUPPLY POWER
1 Connect the charger’s AC power cord to a
wall outlet.
ATTACH BATTERY PACK
2 Align the marks and slide the battery pack
in the direction of the arrow until it locks
in place.
•The CHG. indicator begins blinking to
indicate charging has started.
DETACH BATTERY PACK
3 When the CHG. indicator stops blinking
but stays lit, charging is finished. Slide the
battery pack opposite the direction of the
arrow.
CHG. (charge)
indicator
Marks
To AC outlet
REFRESH indicator
REFRESH switch
REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge the
battery pack before recharging. Perform the
REFRESH function after no less than 5 chargings.
To discharge the battery . . .
...... attach the battery pack to the adapter as
shown in the above illustration. Then push
REFRESH. The REFRESH indicator lights
when discharging starts, and goes out when
discharging is complete.
Page: 4
EN-5
NOTES:
● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and
the frequency of zooming. It is safer to have spare battery packs.
● Charging times are for fully discharged battery pack, and discharging times are for fully charged battery pack.
● Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
● High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t
allow it to discharge in container, such as a bag.
● If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.
● Remove the battery pack from the adapter immediately after discharging.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● Make sure you unplug the DC cord before charging or discharging the battery pack.
● The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.
indicator should blink during recharging. If not, contact your nearest JVC dealer.
● Perform the REFRESH function after no less than 5 chargings.
● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger
does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.
BATT. PACK
BN-V12U
BN-V22U
BN-V25U
CHARGE
approx. 1 hr. 10 min.
approx. 2 hrs. 10 min.
approx. 2 hrs. 40 min.
DISCHARGE
approx. 3 hrs. 30 min.
approx. 7 hrs.
approx. 10 hrs.
Page: 5
EN-6
USING AC POWER
Use the AC Power Adapter (connect as shown in the illustration).
NOTE:
The supplied AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to
240 V.
AC Power Adapter/
Charger AA-V15U
To AC outlet
DC OUT
terminal
DC cord
Core Filter
Page: 6
EN-7
INFORMATION SPECIFICATION
Power requirement
U.S.A. and Canada : AC 120 V`, 60 Hz
Other countries : AC 110 V to 240 V`,
50/60 Hz
Power consumption : 23 W
Output
Charge : DC 8.5 V , 1.3 A
VTR : DC 6.3 V , 1.8 A
Charging system : Constant current,
peak detection,
timer controlled
Dimensions : 140 (W) x 42 (H)
x 68 (D) mm (5-9/16”
x 1-11/16” x 2-11/16”)
Weight : Approx. 300 g (0.71 lbs)
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. Change or modifications not approved by the
party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Page: 15
VICTOR COMPANY OF JAPAN, LIMITED
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.
U Printed in Japan
0598AYV*YP*YP
AA-V15U

Question & answers

There are no questions about the JVC AA-V15U yet.

Ask a question about the JVC AA-V15U

Have a question about the JVC AA-V15U but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the JVC AA-V15U. Please make sure that you describe your difficulty with the JVC AA-V15U as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.