HP rp 5800 manual

View a manual of the HP rp 5800 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: HP
  • Product: Cash register
  • Model/name: rp 5800
  • Filetype: PDF
  • Available languages: English, Spanish

Table of Contents

Page: 0
1. 2 USB 2.0 ports with sliding door 6. Hard Drive LED
2. 5.25” external optical drive 7. NIC activity indicator LED
3. NIC link indicator LED 8. Stand for vertical configuration (optional)
4. Power/ Diagnostic LED 9. HP 2-button scroll mouse-(optional)
5. Power button 10. HP Standard keyboard (optional)
1. 24 Volt USB + PWR port 10. PS/2 keyboard port
2. Two (2) Full-Height Slots*. Can be configured either as two (2) PCI or two (2) PCIe x1 Full-Height slots. Shown is optional 2 Port
RS232 serial (power configurable) Card, COM4 port (left) and COM3 port (right port)
3. RJ-45 LAN jack 11. VGA port
QuickSpecs HP rp5800 Retail System
Overview
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 1
Page: 1
4. RS232 serial COM3 (as described in item 2) 12. 5 USB 2.0 ports
5. RS232 serial (power configurable) COM1 port 13. RS232 serial (power configurable) COM2 port
6. PS/2 mouse port 14. Display Port
7. 240W EPA – Active PFC power supply (no line switching
required)
15. RJ12 cash drawer port
8. Line in audio jack 16. One (1) PCIe x16 Slot* – shown is optional three (3) port 12
Volt USB +Power Card
9. Line out audio jack 17. One (1) PCIe x1 Slot* (shown is optional three (3) port 12 Volt
USB + Power Card
* NOTE:A variety of cards are available to populate slots, dependant on riser choice and connectors utilized. For full details, please
contact your HP sales representative for configuration choices.
At A Glance
UEFI BIOS developed and engineered by HP for better security, manageability and software image stability
Intel Q67 Express chipset supporting Intel 2nd generation Core processors, featuring Intel HD Graphics and vPro Technology
(available with select processors)
One of the following operating systems:
Genuine Windows 7 Professional 32-bit
Genuine Windows 7 Professional 64-bit
Genuine Microsoft Windows Embedded POSReady 2009
FreeDOS
Intel 82579LM GbE integrated network connection
DDR3 Synchronous Dynamic Random Access Memory (SDRAM)
Integrated dual independent monitor support via VGA and digital DisplayPort v1.1a video interfaces
Discrete graphics options available
90% high efficiency energy saving power supply
ENERGY STAR 5.0 qualified models available (dependent upon the desired configuration)
Can be configured with multiple hard disk drives in a RAID array
Industry leading Design for Environment standards
Protected by HP Services, including standard 3-3-3 warranty and warranties up to 5-5-5 (terms and conditions vary by country;
certain restrictions and exclusions apply)
Tool-less serviceability features for easier upgrades and repairs
40C ambient thermals standard. Optional 50C thermal configuration available.
Optional HP Rear Port/Cable Control Cover Available
Point of Sale I/O ports including cash drawer port.
Configurable Full-Height expansion slots Must choose either a PCI Riser or PCIe Riser. The choice of riser will affect which
cards can be utilized.
Either the PCI Riser or the PCIe Riser contain a Serial Port Connector, and if this connector is populated by a Serial Card
then one of the riser bays is covered and cannot be used
NOTE: All models and features may not be available in all countries
QuickSpecs HP rp5800 Retail System
Overview
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 2
Page: 2
Model Key and Example
NOTE: This diagram is an example that illustrates how to read the model number. It is not intended to give every available
configuration choice specified in the body of this document and may include references to modules that are out of date and no longer
available.
Operating Systems
Preinstalled Genuine Windows 7 Professional Edition (32-bit or 64-bit)
Genuine Microsoft Windows Embedded POSReady 2009
FreeDOS
Supported Genuine Windows XP Professional Edition (32-bit)
Genuine Windows 7 Enterprise Edition*
Tested Microsoft Windows Server 2003 R2 Standard (64-bit & 32-bit)
Microsoft Windows Server 2008 R2 Standard (64-bit)
Microsoft Windows Server 2012 R2 Standard (64-bit)
Certified Novell SUSE Linux Enterprise Desktop†
* System may require upgraded and/or separately purchased hardware and/or a DVD drive to install
the Windows 7 software and take full advantage of Windows 7 functionality. See
http://www.microsoft.com/windows/windows-7/ for details.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 3
Page: 3
† The following features are not supported by Novell SUSE Linux Enterprise Desktop:
Intel Gigabit CT Desktop NIC
Broadcom NetXtreme Gigabit Ethernet Plus
HP ProtectTools
HP Blu-ray Writer playback of commercial movies
DisplayPort video interface
HP 2nd serial port adapter
Power Management features
Systems configured with Linux do not qualify for ENERGY STAR
Value Added Software(included with all models; not included when configured with FreeDOS)
HP ProtectTools Security Suite HP Vision Diagnostics
HP Software Management Agent PDF Complete Corporate Edition
Computrace for Desktops agent Microsoft Office 2010 Starter
Value Added Software(included with select models; not included when configured with FreeDOS)
HP Power Assistant v2.0 Roxio Creator Business
Computer Setup Utility Corel WinDVD
Norton Internet Security 20111
1 60 day trial period for Norton Internet Security 2011 software. Internet access required to receive updates. First update included.
Subscription required for updates thereafter.
HP Client Management Solutions(available for free download from the Internet)
http://www.hp.com/go/easydeploy
HP SoftPaq Download Manager HP Systems Software Manager
HP Client Catalog for Microsoft SMS HP Client Automation Starter
Retail Solutions Services and Features
Intel® Stable Image Platform Program (SIPP) Factory Express Deployment and Lifecycle Services
Intel® vPro™ Technology Intel® Standard Manageability
HP Global Series Services Trusted Platform Module (TPM) v1.21
1 TPM module disabled where restricted by law, i.e. Russia.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 4
Page: 4
Service and Support
On-site warranty and service1: This limited warranty and service offering delivers parts, labor and on-site repair for terms up to 5
years. Response time is next business day2 and includes free telephone support3 24 x 7. Global coverage2 ensures any product
purchased in one country and transferred to another non-restricted country will remain fully covered under the original warranty
and service offering. Some countries/regions do not offer one year onsite and labor.
1 Terms and conditions may vary by country. Certain restrictions and exclusions apply
2 On-site services may be provided pursuant to a service contract between HP and an authorized HP third party provider, and is not
available in certain countries. Global service response times are based on commercially reasonable best effort and may vary by
country
3 Technical telephone support applies only to HP configured, HP and HP qualified third party hardware and software. Toll-free
calling and 24 x 7 support may not be available in some countries.
Chipset
Intel® Q67 Express
Processor
Intel® Pentium® Dual-Core Processors
Intel® Pentium® Dual-Core G850 Processor
2.90 GHz, 3 MB cache, 2 cores
Intel® 2nd Generation Core™ i3 Processors
Intel Core i3-2120 Processor
3.30 GHz, 3M cache, 2 cores/4 threads
Intel® 2nd Generation Core™ i5 Processors
Intel Core i5-2400 Processor
3.10 GHz, 6M cache, 4 cores/4 threads
Intel Stable Image Platform Program (SIPP)
Supports Intel vPro Technology
Intel® 2nd Generation Core™ i7 Processors
Intel Core i7-2600 Processor
3.40 GHz, 8M cache, 4 cores/8 threads
Intel Stable Image Platform Program (SIPP)
Supports Intel vPro Technology
Intel® vPro™ Technology
HP rp5800 Retail Systems featuring this technology include processors that are part of the Intel 2011 Stable Image Platform
Program (SIPP) designed to ensure the stability promise inherent in the value proposition of the HPrp5800 Retail System, thus
making this model the most stable, secure, and manageable platforms available to retailers today.
Intel Advanced Management Technology (AMT) v7.0 – An advanced set of remote management features and functionality which
provides network administrators the latest and most effective tools to remotely discover, heal, and protect networked client
systems regardless of the system's health or power state. AMT 7.0 includes the following advanced management functions:
Power Management (on, off, reset)
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 5
Page: 5
Hardware Inventory (includes BIOS and firmware revisions
Hardware Alerting
Agent Presence
System Defense Filters
SOL/IDER
Cisco NAC/SDN Support
ME Wake-on-LAN
DASH 1.1 compliance
IPv6 Support
Fast Call for Help - a client inside or outside the firewall may initiate a call for help via BIOS screen, periodic connections, or
alert triggered connection
Remote Scheduled Maintenance - pre-schedule when the Retail System connects to the IT or service provider console for
maintenance. Remote Retail Systems can get required patches, be inventoried, etc by connecting to their IT console or
Service Provider when it's convenient
Remote Alerts – automatically alert IT or service provider if issues arise
Access Monitor – Provides oversight into Intel® AMT actions to support security requirements
PC Alarm Clock
Microsoft NAP Support
Host Base set-up and configuration
Management Engine (ME) firmware roll back
Wireless AMT functionality on Point of Sale/Desktop (WoDT)
Enhanced KVM resolution
Redundant Array of Independent Drives (RAID)
Flexible implementation:
DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup. Locked
drives will be displayed as such in the RAID option ROM interface.
Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not appear in
Drive Configuration when switching to RAID mode.
DPS Self Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE:
RAID 1 is the only RAID configuration offered via factory configurations. The pre-configured systems:
are complete RAID systems and have both drives installed.
have the necessary Option ROM configuration.
are pre-loaded and pre-installed with all required Intel software.
include a preinstalled operating system that is mirrored mode out of the box.
Please refer to the HP White Paper titled “Advanced Host Controller Interface (AHCI) and Redundant Array of Independent Disks
(RAID) on HP Compaq PCs” at: http://www.hp.com for more information and instructions.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 6
Page: 6
DDR3 Synchronous DRAM NON-ECC System Memory
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent
all possible memory configurations. The HP rp5800 Retail System supports non-ECC DDR3 PC3-12800 (1600 MHz) and PC3-
10600 (1333 MHz) memory.
CAUTION: You must shut down the Retail System and disconnect the power cord before adding or removing memory modules.
Regardless of the power-on state, voltage is always supplied to the memory modules as long as the Retail System is plugged in to
an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory
modules or system board.
Memory Configurations:
Maximum Memory Supports up to 16 GB of DDR3 SDRAM using DIMM modules. Slot 1 is black and must always
be populated. Not all memory configurations possible are represented below.
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all
memory may not be available due to system resource requirements. Addressing memory
above 4 GB requires a 64-bit operating system.
Total Memory Slot
Channel A Channel B
1 (black) 2 (white) 3 (white) 4 (white)
1 GB 1 GB
2 GB
(dual channel symmetric)
1 GB 1 GB
4 GB
(dual channel symmetric)
1 GB 1 GB 1 GB 1 GB
8 GB
(dual channel symmetric)
2 GB 2 GB 2 GB 2 GB
16 GB
(dual channel symmetric)
4 GB 4 GB 4 GB 4 GB
NOTE: The Intel Q67 Express chipset includes a built-in Management Engine (ME), which allocates memory for manageability
functions. Management Engine memory is shared with system memory. If the POS System contains a single SO-DIMM, 16 MB of
memory is pre-allocated for it at system startup. If the POS System contains two SO-DIMMs, 32 MB of memory is pre-allocated. This
memory is not made available to the operating system, just as pre-allocated video memory is not available.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 7
Page: 7
Front View Quantity Supported Position Controller
3.5-inch SATA Hard Drive 3 1, 2*, 3 SATA
Optical Drive Bay or Carrier for
Hard Drive
1 2 SATA
External HDD can be connected through optional external ESATA port. 3 Drive maximum
NOTE: When ESATA is installed, either the 2nd HDD (if applicable) or ODD (if applicable) cannot be used.
* For CRU Removable storage in lieu of ODD
Data Storage Drives
250-GB Hard Disk Drives
HP 250-GB SATA 3.0 Hard Disk Drive (3.5”)
7,200 rpm, 8MB cache, 6.0 GB/s, NCQ, Smart IV
HP 250-GB SATA 3.0 Removable Hard Disk Drive
7,200 rpm, 8MB cache, 6.0 GB/s, NCQ, Smart IV
500-GB Hard Disk Drives
HP 500-GB SATA 3.0 Hard Disk Drive
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
HP 500-GB SATA 3.0 Removable Hard Disk Drive
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
1-TB Hard Disk Drives
HP 1 TB SATA 3.0 Hard Disk Drive
7,200 rpm, 16MB cache, 6.0 GB/s, NCQ, Smart IV
Solid State Drives
HP 120-GB 2.5” SSD
HP 128-GB 2.5” SSD
HP 160-GB 2.5” SSD
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 8
Page: 8
Optical Disc Drives
HP DVD-ROM Drive1
HP SuperMulti DVD Writer Drive2
HP Blu-ray Writer Drive3
1 For playing DVDs
2 For writing CDs and DVDs, video editing and authoring DVDs, Roxio Business Creator 10
3 For writing CDs and DVDs, video editing and authoring DVDs, Corel WinDVD 8
Media Card Readers
HP 22-n-1 Media Card Reader
Security Solutions and Capabilities
Trusted Platform Module (TPM) 1.21
Stringent security (via BIOS)2
SATA port disablement (via BIOS)
Drive lock
RAID configurations
HP ProtectTools Security Software Suite
Serial, parallel, USB enable/disable (via BIOS)
Optional USB Port Disable at factory (user configurable via BIOS)
Power Configurable Serial Ports (COM 1, 2, 3 and 4 ) via the HP BIOS
Removable media write/boot control
Power-On password (via BIOS)
Setup password (via BIOS)
HP Hood Sensor
TPM 1.2 Embedded Security Chip* integrated with Broadcom NIC
HP ProtectTools Security Software Suite with BIOS Configuration (serial (all 4), parallel, USB enable / disable), Credential Manager,
Smart Card Manager (sold separately)
Three (3) port 12 Volt USB + PWR Card (sold separately)
Two (2) port Power Configurable RS232 Serial Card COM 3 & 4 (sold separately)
Wall Mount (sold separately)
HP Desktop Security Lock Kit (lock and cable) (sold separately)
Security Cable with Kensington lock (sold separately)
HP Rear Port/Cable Control Cover (sold separately)
1 TPM module disabled where use is restricted by law; for example, Russia.
2 This setting is defaulted to disable, but when enabled, the PW jumper will not clear the BIOS pre-boot authentication passwords.
NOTE: TPM module disabled where use is restricted by law; for example, Russia.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 9
Page: 9
I/O Ports
USB 2.0 Front: Two (2), covered
Rear: Five (5)
USB 24V One (1) 24V powered USB
Serial Two (2) RS-232 (power configurable) ports standard
Parallel One port available as an option*
eSATA One port available as an option*
RS-232 Two (2) RS-232 powered configurable ports optional (for a total of 4*)
USB+PWR 12V Two (2) USB+PWR 12V cards optional (three (3) 12 Volt USB+ PWR per card) for a total of 6*
PS/2 One (1) color-coded support for keyboard (purple)
One (1) color-coded support for mouse (green)
RJ-11 One (1) RJ-11 Cash Drawer port
Video One (1) VGA
One (1) DisplayPort v1.1a
Provides integrated dual independent monitor support
DVI output Available via optional DisplayPort to DVI Adapter
Audio Rear: Line input (supports microphone or line input) and line out
All ports are 3.5mm in diameter
NOTE: See Audio/Visual section for information on re-taskable audio ports
NIC One (1) Industry standard RJ-45 port accesses the integrated network interface controller
*These options occupy slot openings so less slots will be available when the options are installed
Serial Ports (Power Configurable in HP Bios) – detail
1 and 2: Powered Configurable serial port expansion card installation that supplies two additional serial ports (COM3 and COM4)
3 and 4: Two Power Configurable serial ports, COM1 and COM 2, are standard on the POS System.
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 10
Page: 10
Slots
Full-Height Total of Two (2) Full-Height Slots, with a Choice of either:
1.) PCI - Two (2) each: 4.2" full height, 6.6" length, 25W max. power
2.) PCIe x1 - Two (2) each: 4.2" full height, 6.6" length, 10W max. power
Half-Height Total of Two (2) Half-Height:
PCI Express x1 - One (1) each: 2.5" low profile, 6.6" length, 10W max. power
PCI Express x 16 - One (1) each: 2.5 low profile, 6.6" length, 25W max. power
Bays
External 1 each 5.25”, 5.7” depth
Internal HDD 2 each 3.5”
Controllers
Hard drive SATA
Supports up to SATA 6.0 Gb/s
SATA interfaces One (1) SATA 2.0
Two (2) SATA 3.0
Host SATA Advanced Host Controller Interface (AHCI) Revision 1.2. The specification includes a description of the
hardware/software interface between system software and the host controller hardware
Network Interface Connections
Intel 82579LM (integrated) GbE Network Connection
Intel PRO 1000 CT GbE NIC Card (PCIe x1) (optional)
NOTE: The integrated network connection is required to support Intel vPro Technology
Communications
HP WLAN NIC 802.11 b/g/n 1x2 PCIe Card
2006 LSI PCIe x1 56K International SoftModem (optional)
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 11
Page: 11
Graphics
Intel HD Graphics (integrated)
AMD FirePro 2270
Nvidia Quadro NVS 300 Graphics (PCIe x16)
HP DisplayPort to DVI-D Adapter
HP DisplayPort to HDMI Adapter
HP DisplayPort to VGA Adapter
Multi-Media
High Definition Audio (integrated) with Realtek ALC261 codec (all ports are stereo)
Line-out and Line-In rear Ports (3.5mm)
Internal Speaker (standard)
Input/Output Devices
HP PS/2 Standard Keyboard
HP USB Standard Keyboard
HP USB and PS/2 Washable Keyboard
HP PS/2 Optical Mouse
HP USB Optical Mouse
HP USB Laser Mouse
HP USB and PS/2 Washable Mouse
Miscellaneous Devices and Configurations
HP FireWire (IEEE 1394) PCIe x1 Card
HP Parallel Port Adapter
HP eSATA Port Adapter
HP Tower Stand
HP Rear Port/Cable Control Cover
rp5800 50C Thermal Kit
rp5800 PCI Riser Assembly
rp5800 PCIe Riser Assembly
Three (3) port 12 Volt USB + Pwr Card
Two (2) port RS232 Serial (power configurable) COM 3 & 4 port card
QuickSpecs HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 12
Page: 12
Communication Devices
Part #
Intel Gigabit CT Desktop NIC (PCIe x1) FH969AA
Broadcom NetXtreme GbE Ethernet Plus NIC (PCIe x1) FS215AA
HP Wireless 802.11 b/g/n NIC (PCIe x1) FH971AA
NOTE:
The use of a discrete network interface connection card (wired or wireless) will disable the vPro Technology
features.
Graphics Solutions
Part #
AMD FirePro 2270 QK551AA
Nvidia Quadro NVS 300 Graphics (PCIe x16) BV456AA
HP DMS-59 to Dual DVI Adapter DL139A
HP DMS-59 to Dual DisplayPort Adapter XP688AA
HP DisplayPort Cable Kit VN567AA
HP DisplayPort To Dual Link DVI-D Adapter NR078AA
HP DisplayPort To DVI-D Adapter FH973AA
HP DisplayPort to HDMI Adapter BP937AA
HP DisplayPort to VGA Adapter AS615AA
Hard Disk Storage Drives
Part #
HP 500GB SATA (6.0Gb/s) Hard Disk Drive QK554AA
HP 1TB SATA (6.0Gb/s) Hard Disk Drive QK555AA
HP 128-GB Solid State Drive QV063AA
HP 160-GB Solid State Drive QV064AA
HP eSATA Adapter FH966AA
HP Removable SATA Hard Drive Enclosure (frame & carrier) RY102AA
HP Removable SATA Hard Drive Enclosure (carrier only) RY103AA
QuickSpecs HP rp5800 Retail System
After-Market Options (availability may vary by region)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 13
Page: 13
Input / Output Devices
Part #
HP PS/2 Standard Keyboard DT527A
HP USB Standard Keyboard DT528A
HP 2-port Powered Serial Port Card QP906AA
HP 3-port 12 Volt Powered USB Port Card QP905AA
HP USB Washable Keyboard VF097AA
HP USB and PS/2 Washable Mouse BM866AA
HP USB and PS/2 Washable Keyboard and Mouse Kit BU207AA
HP PS/2 Optical Mouse EY703AA
HP USB Optical Mouse DC172AT
HP USB Laser Mouse GW405AT
HP rp5800 PCI Riser Assembly QP907AA
HP rp5800 PCIe x1 Riser Assembly QP908AA
System Memory
Part #
HP 2 GB DDR3-1333 MHz DIMM AT024AA
HP 4 GB DDR3-1333 MHz DIMM VH638AA
HP 2 GB DDR3-1600 MHz DIMM B4U35AA
HP 4 GB DDR3-1600 MHz DIMM B4U36AA
Multimedia Devices
Part #
HP DVD-ROM Drive AR629AA
HP SuperMulti Drive QS208AA
HP Blu-ray Writer Drive B4F70AA
Removable Media Storage
Part #
HP 22-n-1 Media Card Reader AR941AA
QuickSpecs HP rp5800 Retail System
After-Market Options (availability may vary by region)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 14
Page: 14
Security Devices
Part #
HP Chassis Security Kit AR639AA
HP Business PC Security Lock PV606AA
HP Wall Mount/Security Sleeve VN570AA
HP Keyed Lock Cable BV411AA
Accessories
Part #
HP rp5800 Trim Bezel – with ODD Opening QP910AA
HP Integrated Work Center Stand GN783AA
HP Tower Stand VN569AA
HP Parallel Port Adapter KD061AA
HP FireWire (IEEE 1394) Card PA997A
HP SuperSpeed USB 3.0 Card BM867AA
HP Rear Port / Cable Control Cover QP909AA
Retail Solutions Specific Accessories
Part #
HP Standard Duty Cash Drawer QT457AA
HP Heavy Duty Cash Drawer FK182AA
HP Till with Locking Cover QT458AA
HP Flip-Top Cash Drawer BW867AA
HP Flip-Top Till with Locking Cover BZ335AA
HP Imaging Barcode Scanner BW868AA
HP Linear Barcode Scanner QY405AA
HP Presentation Barcode Scanner QY439AA
HP POS Pole Display FK225AA
HP Graphical Pole Display QZ704AA
HP Mini MSR with Brackets FK186AA
HP POS Keyboard without MSR FK221AA
HP POS Keyboard with MSR FK218AA
HP Powered USB Thermal Receipt Printer FK224AA
HP Serial/USB Thermal Receipt Printer BM476AA
HP Hybrid Printer with MICR FK184AA
HP USB Y Cable (for Serial USB Receipt Printer) BM477AA
HP Cable Pack for Dual Cash Drawers QT538AA
HP L5006tm 15-inch LCD (SAW) Touchscreen Monitor RB146AA
HP L5009tm 15-inch LCD (APR) Touchscreen Monitor VK202AA
QuickSpecs HP rp5800 Retail System
After-Market Options (availability may vary by region)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 15
Page: 15
HP L1506x 15-inch LED Monitor (Non-Touchscreen) LL543AA
HP L6010 10.4-inch Monitor (Non-Touchscreen) A1X76A
HP Dual Position Stand for L6010 A1X79AA
HP L6015tm 15-inch (PCAP) Touchscreen Monitor A1X78A
HP L6017tm 17-inch (PCAP) Touchscreen Monitor A1X77A
HP Height Adjusting Stand for L6015/17tm A1X81AA
HP Retail Integrated Fingerprint Reader QZ672AA
HP Retail Integrated Webcam QZ673AA
HP Retail Integrated Dual-Head MSR QZ700AA
HP rp5800 Terminal Enclosure Assembly QQ971AA
HP rp5800 Integration Tray Assembly QQ972AA
HP Display Pole Mount Assembly QQ973AA
HP Optional Display Arm Assembly QQ974AA
QuickSpecs HP rp5800 Retail System
After-Market Options (availability may vary by region)
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 16
Page: 16
Weights & Dimensions
(configured with 1 HDD & 1 ODD)
Chassis
(H x W x D)
3.95 x 13.3 x 14.9 in
100 x 338 x 379 mm
System Volume 782.77 cu in
13.0 L
Tower Stand
(H x W x D)
1.1 x 7.0 x 7.9 in
29 x 178 x 200 mm
Packaging
(H x W x D)
9.0 x 19.7 x 23.4 in
229 x 500 x 594 mm
System Weight* 15.08 lb
6.84 kg
Shipping Weight* 16.28 lb
7.34 kg
Max Supported Weight
(desktop orientation)
77.0 lb
35.0 kg
Unit Environment and Operating Conditions
General Unit Operating Guidelines
Keep the POS System away from excessive moisture, direct moisture and the extremes of heat and cold, to ensure that unit is
operated within the specified operating range.
Leave a 10.2-cm (4-in) clearance on front side and power supply side of the POS System to permit the required airflow.
If within an enclosure, the front side should be 100% open. The clearance between the system and the cabinet must be at least
10 mm (0.4 inch) on the sides and top and at least 50-mm (2-inch) clearance in the rear with power supply venting area 100%
open per the above bullet.
Never restrict airflow into the POS System by blocking any vents or air intakes.
Do not stack POS Systems on top of each other or place POS Systems so near each other that they are subject to each other's re-
circulated or preheated air.
Occasionally clean the air vents on the front, back, and any other vented side of the POS System. Lint, dust and other foreign
matter can block the vents and limit the airflow.
Temperature Range Operating: 32° to 104° F (0° to 40° C)*
Non-operating: -22° to 149° F (-30° to 65° C)
Relative Humidity Operating: 10% to 90% (non-condensing at ambient)
Non-operating: 0% to 95% (non-condensing at ambient)
Maximum Altitude
(unpressurized)
Operating: 10,000 ft (3048 m)
Non-operating: 30,000 ft (9144 m)
* Operating temperature is de-rated 1.0 deg C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level, no direct sustained sunlight.
Maximum rate of change is 10 deg C/Hr. The upper limit may be limited by the type and number of options installed.
NOTE: An optional thermal configuration is available to support 50C ambient temperatures. This is a factory configurable configuration
only.
QuickSpecs HP rp5800 Retail System
Technical Specifications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 17
Page: 17
Power Supply 240-watt – EPA90 power supply – Active PFC
*This power supply meets ENERGY STAR compliance in conjunction
with a select range of processors and modules.
Operating Voltage Range 90 to 264 VAC
Rated Voltage Range 100 to 240VAC
Rated Line Frequency 50/60 Hz
Operating Line Frequency Range 47 – 63 Hz
Rated Input Current 4A
Efficiency 87/90/87% at 20/50/100% load
Power Supply Fan 80 mm variable speed fan
ENERGY STAR Compliant ENERGY STAR 5.0 compliant
Power Cord Length 6.0ft (1.8 3m)
Current Leakage (NFPA99) < 275 µA
ROM BIOS Information
Key features of the HP BIOS include:
Deployment and manageability – HP BIOS provides several technologies that help integrate the HP rp5800 Retail System into
retail, such as PXE, remote configuration, remote control, and F10 Setup support for 12 languages.
Select models feature either Intel Standard Manageability or vPro Technology.
Stability – HP BIOS supports the HP stable product roadmap by releasing only critical BIOS changes to the factory and advanced
change notification.
Computrace agent – For tracking and tracing services, available in select countries, separate software and purchase of a
subscription is required.
Thermal and power management – The HP BIOS provides and enables thermal and power management technologies so
component temperatures are managed for high reliability and to assist in operating the HP rp5800 Retail System in any retail
environment.
Acoustic performance – Industry leading acoustic emissions across the range of operating conditions.
Serviceability – HP BIOS provides diagnostic and detailed service information.
Upgrades and recovery – HP BIOS provides numerous ways to upgrade HP the HP rp5800 Retail Systems, including BIOS updates
from within DOS (Flashbin), BIOS updates from within Windows (HPQFlash), HP Client Manager, and fail-safe recovery. In
addition, the HP rp5800 Retail System BIOS Utilities tool enables replicated BIOS setup throughout the Enterprise; it is available
from within the BIOS software and from the support website
Additional HP BIOS Features
Power-On password – Helps prevent an unauthorized user from powering on the system.
Administrator password – Also known as the setup password, this helps prevent unauthorized changes to the system
configuration. If the administrator password is not known, the BIOS version cannot be changed and changes cannot be made to
BIOS settings using F10 setup or under the OS.
Advanced Configuration and Power Interface (ACPI) – Represents a significant innovation in power and configuration
management, allowing operating systems and applications to manage power based on activity and usage. HP rp5800 Retail
Systems use ACPI to provide power conservation features.
S5 Max Power Savings setting supports EU Lot6 requirement and allows the HP rp5800 Retail System to power down below 1W
is S5 (when turned off). When S5 Max Power Savings feature is enabled power to slots is turned off along with WOL
functionality.
QuickSpecs HP rp5800 Retail System
Technical Specifications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 18
Page: 18
Other Features
Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode. Controls
system power consumption, making it possible to place individual cards and peripherals in a low-power or powered-off state
without affecting other elements of the system.
System Management BIOS v2.6
Intel Wired for Management support; industry wide initiative to make Intel architecture based Retail Systems, PCs, servers and
mobile computers more inherently manageable out-of-the-box and over the network
Dual State Power Button; acts as both an on/off button and a suspend-to-sleep button
Serviceability Features
Dual colored power LED on front of the HP rp5800 Retail System to indicate either normal or fault condition
Indicator Lights on front of system:
Power / Diagnostic LED Hard Drive LED
NIC Link LED NIC Activity LED
Diagnostic LED Explanation Table:
Number of 1-second red LED blinks followed by a 2-second pause, then repeats:
2 – processor thermal protection activated
3 – processor not installed
4 – power supply failure
5 – memory error
6 – video error
7 – PCA failure (ROM detected failure prior to video)
8 – invalid ROM, bootblock recovery mode
9 – system not fetching code
10 – system hang while loading an option ROM
System/Emergency ROM
NIC Link and activity LED's on front bezel
Flash ROM
CMOS Battery Holder for easy replacement
Flash Recovery with Video Configuration Record Software
5 Aux Power LED on System PCA
Processor ZIF Socket for easy Upgrade
Over-Temp Warning on Screen (Requires IM Agents)
Clear Password Jumper
DIMM Connectors for easy Upgrade
Clear CMOS Button
NIC LEDs (integrated) (Green & Amber) - Rear
Color coordinated cables and connectors
Tool-less Hood Removal
Front power button
System memory can be upgraded without removing the system board or any internal components
Tool-less Hard Drive, Optical Drive Removal
NOTE: thumb screw release mechanism is used with the Ultra-slim Desktop chassis cover.
QuickSpecs HP rp5800 Retail System
Technical Specifications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 19
Page: 19
Additional Features Description
Intel® Standard Manageability
Requires the utilization of the integrated network connection
Delivered with processors that are not part of the Intel Stable Intel Platform
Program (SIPP)
Intel Advanced Management Technology (AMT) v3.2
Basic Retail SYSTEM management capabilities such as asset inventory, HW
alerting, SOL/IDE-R, remote configuration, agent presence and system defense.
DASH 1.1 compliance. Support for profile updates.
Host VPN support for local management VPN tunneling
Intel Standard Manageability includes features of Intel Active Management Technology
(Intel AMT). Intel AMT requires the Retail system to have an Intel AMT-enabled chipset,
network hardware and software, as well as connection with a power source and a
corporate network connection. Setup requires configuration by the purchaser and may
require scripting with the management console or further integration into existing
security frameworks to enable certain functionality. For more information, see
http://www.intel.com/technology/platform-technology/intel-amt/.
DASH 1.1 support (Desktop and Mobile
Architecture for System Hardware)
A standards initiative for representing out-of-band management capability for Retail
Systems. It is a secure, web-services based successor to ASF.
ASF 2.0 support (Alert Standard Format)
Industry-standard specification for network alerting in operating system-absent
environments
TXT (Trusted Execution Technology) and
VT-d (Virtualized devices)
TXT allows for secure management (via TPM) and measured launch of VMM, as well as
teardown of secrets in unexpected reset case. TXT support provided in select Intel
processors
VT-d is a chipset technology that virtualizes directed I/O
Together, TXT and VT-d may be used to support verified launch of a known trusted VMM
that also may protect VMs from accessing each other's memory.
Computrace Computrace agent support standard
Towerable Orientation The chassis can be oriented as either a desktop or a tower.
Drive Protection System
DPS Access through F10 Setup during Boot
A diagnostic hard drive self test. It scans critical physical components and every sector of
the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a Windows-
based diagnostics utility or through the Retail System's setup procedure. It produces an
evaluation on whether the hard drive is the source of the problem and needs to be
replaced
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I – Drive Failure Prediction
SMART II – Off-Line Data Collection
SMART III – Off-Line Read Scanning with
Defect Reallocation
Allows hard drives to monitor their own health and to raise flags if imminent failures were
predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
QuickSpecs HP rp5800 Retail System
Technical Specifications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 20
Page: 20
Defect Reallocation
SMART IV – End-to-End CRC for hard drives
Detects errors in Read/Write buffers on HDD cache RAM
Interface in F10 setup provides confirmation of SMART IV support.
QuickSpecs HP rp5800 Retail System
Technical Specifications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 21
Page: 21
High Definition Audio
Type Integrated
HD Stereo Codec Realtek 2-channel ALC261 codec
Audio I/O Ports Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio
driver)
Rear Line-Out* (190 ohms Output Impedance, expects at least a 10-K ohm load)
Line-in and Line-out, both on rear.
All ports are 3.5mm in diameter
Internal Speaker Amplifier 1.5W amplifier for the internal speaker only. External speakers must be powered externally. Rear
Line-in audio port is re-taskable as either Line-in or Microphone-In.
Multi-streaming Capable Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to
be sent to/from the front and rear jacks.
Sampling 8 kHz – 192 kHz
Wavetable Syntheses
(software)
Yes – Uses OS soft wavetable
Analog Audio Yes
# of Channels on Line-Out
(mono/stereo)
Stereo (Left & Right channels)
Internal Speaker Yes
External Speaker Jack
(Line-Out)
Yes
QuickSpecs HP rp5800 Retail System
Technical Specifications - Audio
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 22
Page: 22
Intel 82579LM GbE Network Connection(integrated)
Connector RJ-45
System Interface Integrated on PCA
Controller Intel 82579LM gigabit platform LAN connect networking controller
Memory 24 KB FIFO packet buffer memory
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1P, 802.1Q, 802.2, 802.3, 802.3 ab and 802.3u compliant
Bus architecture GLCI, LCI interface. Intel specific MAC to PHY interface
Data transfer mode At gigabit GLCI (Intel proprietary 802.3 series-based interface) is for Data, LCI (parallel bus) for MDIO,
at 10/100 LCI for both data and MDIO, GLCI is idle.
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1P, 802.1Q, 802.2, 802.3, 802.3ab and 802.3u compliant
Bus architecture GLCI, LCI interface. Intel specific MAC to PHY interface
Data transfer mode At gigabit GLCI (Intel proprietary 802.3 series-based interface) is for Data, LCI (parallel bus) for MDIO,
at 10/100 LCI for both data and MDIO, GLCI is idle.
Power requirement Requires 3.3V,1.9/1.8V and 1.0V or just 3.3V with integrated regulators
Power consumption 1.3 Watts for 82567 whole LOM
ACBS Intel Auto Connect Battery Saving feature
Boot ROM support Yes
Network transfer mode Full-duplex
Half-duplex (not supported for the 1000BASE-T transceiver)
Network transfer rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Environmental Operating Temperature: 32° to 131°F (0° to 55° C)
To 70° C for external regulator
Operating Humidity: 85% at 131° F (55° C)
Management WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable diagnostic.
Alerting ASF 2.0 support, AMT 3.0 support
QuickSpecs HP rp5800 Retail System
Technical Specifications - Communications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 23
Page: 23
Intel Gigabit CT Desktop Network Interface Controller (AMO)
Connector RJ-45
System Interface PCI Express x1
Controller Intel WG82574L Gigabit Ethernet Controller
Memory Integrated Dual 48K configurable transmit receive FIFO Buffers
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1P, 802,1Q, 802.2, 802.3, 802.3AB and 802.3u compliant, 802.3x flow control
Bus architecture PCI Express 1.0a
Data path width X1, 250 MB/s, Bi-directional interface
Data transfer mode Bus-master DMA
Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for European Union
Power requirement Aux 3.3V, 3.0 Watts in 1000base-T and 2.0 Watts in 100Base-T
Boot ROM support Yes
Network Transfer Rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps (actual rate limited by PCI Bus)
Environmental Operating Temperature: 32° to 131°F (0° to 55° C)
Operating Humidity: 85% at 131° F (55° C)
Dimensions 4.75 x 2.25 x 0.8 in (12.1 x 5.7 x 2.0 cm)
Management WOL, PXE, DMI, WFM 2.0
HP 802.11 b/g/n Wireless Network Connection
Dimensions (L x H) 3.3 x 4.7 in
8.5 x 12 cm
Weight 0.08 lbs
40 g
Controller Ralink RT2790
System interface PCI Express x1
Network standard 802.11 b/g/n
Frequency band 2.400 - 2.497 GHz
Operating temperature 14° to 149°F, operating (-10° to 65°C, operating)
Storage temperature -40° to 176°F, non-operating (-40° to 80°C, non-operating)
Humidity 10-90% operating
5-95% non-operating
Operating voltage 3.3V +/- 9%
12V +/- 8%
Power Consumption Platform/WLAN Mode Power Consumption
Maximum Power Consumption: 10 Watts
QuickSpecs HP rp5800 Retail System
Technical Specifications - Communications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 24
Page: 24
Transmit Only 4 Watts maximum averaged power over 1 second
Transmit Packet or Active Scanning 1000 mA peak current for 100 microseconds or
longer
Receive Only Mode or Idle without IEEE PSP mode
enabled
3 Watts maximum averaged over 1 second
Idle, with IEEE PSP mode enabled 1.0 Watts maximum averaged over 1 second
Transmit Disabled
(turned off in software)
50 mW maximum, averaged over 1 second
Platform in S3 or S4
(power removed from Low Profile PCI Express
Card)
5 mW maximum, averaged over 1 second
Output Power
(approximate)
802.11b mode +19 dBm +/- 1.0 dB maximum
802.11g mode +17 dBm +/- 1.0 dB maximum
EWC mode +17 dBm +/- 1.0 dB maximum (total power in all
transmit chains)
Receive Sensitivity Mode Data Rate Sensitivity
802.11b 1 Mbps -94 dBm
802.11b 11 Mbps -85 dBm
802.11g 6 Mbps -91 dBm
802.11g 18 Mbps -85 dBm
802.11g 48 Mbps -75 dBm
802.11g 54 Mbps -72 dBm
EWC (2.4 GHz) 6.5 Mbps -87 dBm
EWC (2.4 GHz) 54 Mbps -82 dBm
EWC (2.4 GHz) 81 Mbps -78 dBm
EWC (2.4 GHz) 162 Mbps -74 dBm
EWC (2.4 GHz) 270 Mbps -68 dBm
EWC (2.4 GHz) 300 Mbps -64 dBm
Data Transfer Rate Data Rate (MCS) Minimum Throughput
1 Mbps (802.11 b) 700 kbps
2 Mbps (802.11 b) 1.4 Mbps
5.5 Mbps (802.11 b) 3.5 Mbps
11 Mbps (802.11 b) 5.9 Mbps
12 Mbps (802.11 g) 6 Mbps
18 Mbps (802.11 g) 9 Mbps
24 Mbps (802.11 g) 12 Mbps
36 Mbps (802.11 g) 18 Mbps
48 Mbps (802.11 g) 21 Mbps
54 Mbps (802.11 g) 22.5 Mbps
6.5 Mbps (20 MHz EWC) 4.5 Mbps
13 Mbps (20 MHz EWC) 9 Mbps
19.5 Mbps (20 MHz EWC) 13.5 Mbps
QuickSpecs HP rp5800 Retail System
Technical Specifications - Communications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 25
Page: 25
26 Mbps (20 MHz EWC) 18 Mbps
39 Mbps (20 MHz EWC) 27 Mbps
52 Mbps (20 MHz EWC) 36 Mbps
58.5 Mbps (20 MHz EWC) 40 Mbps
65 Mbps (20 MHz EWC) 45 Mbps
78 Mbps (20 MHz EWC) 54 Mbps
104 Mbps (20 MHz EWC) 72 Mbps
117 Mbps (20 MHz EWC) 81 Mbps
130 Mbps (20 MHz EWC) 91 Mbps
13.5 Mbps (40 MHz EWC) 8 Mbps
27 Mbps (40 MHz EWC) 16 Mbps
40.5 Mbps (40 MHz EWC) 24 Mbps
54 Mbps (40 MHz EWC) 32 Mbps
81 Mbps (40 MHz EWC) 48 Mbps
108 Mbps (40 MHz EWC) 64 Mbps
121.5 Mbps (40 MHz EWC) 72 Mbps
135 Mbps (40 MHz EWC) 81 Mbps
Security IEEE and WiFi compliant 64 / 128 bit WEP encryption
AES: CCM
802.1x authentication
WPA: 802.1x. WPA-PSK and TKIP
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
Antenna HP part number 497792-001
Certifications Wi-Fi certified
Certifications for use by
country
United States, Canada, Peru, Taiwan
QuickSpecs HP rp5800 Retail System
Technical Specifications - Communications
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 26
Page: 26
Intel HD Graphics (integrated)
3D/2D Controller Microsoft DirectX 10.1 based with support for Pixel Shader 4.1
VGA Controller Integrated
DisplayPort v1.1a; integrated, multimode capable; supports HDCP and audio over DisplayPort
Bus Type PCI Express x16
RAMDAC Integrated, 350 MHz
Memory Graphics memory is shared with system memory. Graphics memory usage varies depending on the
amount of system memory installed, BIOS settings, operating system, and system load. 32 MB is
pre-allocated for graphics use at system boot time. Additional memory can be allocated at boot time
by the BIOS for PAVP (Protected Audio Video Playback) support for playback of protected video
content.
Additional memory is allocated for graphics as needed using Intel's Dynamic Video Memory
Technology (DVMT), to provide an optimal balance between graphics and system memory use.
HW Video Decode Hardware Accelerated decode for MPEG2 encrypted video; support for PAVP
Maximum Color Depth 32 bits/pixel
Maximum Vertical Refresh Rate 85 Hz at up to 1920x1440, 75 Hz at 2048x1536. Varies with mode and configuration. See table
below.
Multi-display Support Integrated dual independent monitor support facilitated via one VGA port and one DisplayPort v1.1a
integrated on the back plane of the system board and presented as part of the rear I/O set of
interfaces. Support for DVI, HDMI, dual link DVI or second VGA monitor provided by optional HP
DisplayPort adapters.
The system can support greater than two monitors with the addition of an optional discrete graphics
card. Both integrated graphics and discrete graphics can be utilized simultaneously.
Graphics/Video API Support Microsoft DirectX 10.1, OpenGL 3.0
Resolutions Supported Maximum Refresh Rate
Resolution Analog Connection Digital Connection
640x480 85 60
800x600 85 60
1024x768 85 60
1280x720 85 60
1280x1024 85 60
1440x900 75 60
1600x1200 85 60
1680x1050 75 60
1920x1080 85 60-R
1920x1200 85 60-R
1920x1440 85 N/A
2048x1536 75 N/A
2560x1600 N/A 60*
* Only supported when using a DisplayPort connection
QuickSpecs HP rp5800 Retail System
Technical Specifications - Graphics
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 27
Page: 27
NOTE:
Other resolutions may be available but are not recommended as they may not have been tested and
qualified by HP
NOTE:
60-R denotes reduced blanking timings are used on single-link DVI connections and may be used
with other digital connections
NVIDIA NVS 300 PCIe Graphics Card
Form Factor Dimensions Low-profile, 2.586 x 5.7 in (6.57 x 14.48 cm
Graphics Controller Nvidia GT218 GPU
Bus Type PCIe x16
Memory 512 MB DDR3
Connectors DMS-59 Connector
Board Display Options Supports two displays via included DMS-59 to dual VGA cable or 2 DVI monitors via optional DMS-59
to dual single-link DVI-I connectors cable kit part number: DL139A
Multi-monitor support Dual analog or digital (Single Link DVI) monitors (DVI support requires optional DVI cable kit DL139A)
Supported Graphics APIs OpenGL 3.3 support in hardware for optimal performance with OpenGL applications
DirectX 10.1 support in hardware for optimal performance in DX10 applications
Resolution Analog Connection Digital Connection
640x480 85 60
800x600 85 60
1024x768 85 60
1280x720 85 60
1280x1024 85 60
1440x900 75 60
1600x1200 85 60
1680x1050 75 60
1920x1080 85 60-R
1920x1200 85 60-R
2048x1536 85 N/A
1920x1440 75 N/A
NOTE:
60-R denotes reduced blanking timings are used on single-link DVI connections and may be used with other digital connections.
QuickSpecs HP rp5800 Retail System
Technical Specifications - Graphics
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 28
Page: 28
AMD FirePro 2270 512MB Graphics Card
Form Factor Low Profile, Half Length, 2.3" x 6.6"
Graphics Controller AMD FirePro™ 2270 Professional Graphics
Bus Type PCI Express™ x16 Generation 2.0
Memory 512MB DDR3
Connectors DMS-59 connector to support breakout cables for dual DisplayPort, DVI and VGA output.
DMS-59 to VGA adapter included.
(Dual Display Port and Dual DVI adapters sold separately)
Maximum Resolution Digital 2560x1600 (DisplayPort)
Analog 1920x1200 (DVI 60 Hz/ VGA 75Hz)
RAMDAC
Display Output
400 MHz DAC, 10-bit per channel
Power two 30" high resolution displays
Supported Graphics APIs DirectX 11 and OpenGL 4.0
HP DisplayPort to DVI-D Adapter
Connectors DisplayPort and DVI-D single link connector
Adapter length 7.5 in (19.0 cm)
Adapter weight .10 lbs (.05 kg)
HP DisplayPort to VGA Adapter
Connectors DisplayPort and VGA connector
Adapter length 8 in (20 cm)
Adapter weight .1 lbs (.06 kg)
Max. vertical refresh rate 85 Hz
Display support 162 MHz RAMDAC
Display max resolution 1600x1200
Resolutions Supported Resolution Max refresh rate
640x480 85
800x600 85
1024x768 85
1280x720 85
1280x1024 85
1440x900 75
1600x1200 60
1680x1050 60
1920x1080 60-R
1920x1200 60-R
QuickSpecs HP rp5800 Retail System
Technical Specifications - Graphics
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 29
Page: 29
NOTE:
Other resolutions may be available but are not recommended as they may not have been tested and
qualified by HP. Using the HP DisplayPort to VGA Adapter may require an update to the graphics
driver installed on your system. To install the most up-to-date graphics driver go to: www.hp.com.
NOTE:
60-R denotes reduced blanking timings are used. Not all monitors support reduced blanking timing.
QuickSpecs HP rp5800 Retail System
Technical Specifications - Graphics
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 30
Page: 30
Introduction:
HP Serial Advanced Technology Attachment (SATA) Hard Drives maximize the performance of HP Retail Systems by providing the
technologies to meet your increasing storage demands with high-capacity drives offering superior reliability and performance.
SATA provides faster data transfer speeds, better system cooling airflow, more bandwidth, more headroom for speed increases in
future generations and better data integrity. A next-generation technology, the SATA interface connects hard drives to the Retail
System platform enabling easy aggregation of multiple hard drives into a single Retail System. This offers you the additional benefits
of dedicated bandwidth, the ability to more easily identify device failures and scalability. The HP rp5800 Retail System supports the
latest SATA 6.0Gb/s specification.
HP Drive Lock
HP Serial ATA Hard Drives offer enhanced security via a new Drive Lock. When enabled, this ATA security feature set prevents software
access to user data on the drive until one or two user-defined passwords are provided.
SMART IV Technology
Self Monitoring Analysis and Reporting Technology (SMART) hard drive technology allows hard drives to monitor their own health and
to raise flags if imminent failures are predicted. If the drive determines that a failure is imminent, the SMART hard drive technology
enables the intelligent manageability or management software to generate a fault alert. While the current versions of SMART hard
drives do a good job monitoring the data on the hard drive media, the ever increasing emphasis on reliability and quality has promoted
HP to implement SMART IV technology which constantly checks that the data flow from host interface to media and media to host
interface is not compromised. This is accomplished by inserting a 2 byte parity code into every 512 byte block in the data path of the
hard drive's Cache RAM. This unique parity checking performed by HP's SMART IV technology hard drives, allows for more complete
error detection coverage encompassing the entire data path between the host and the hard drive.
Smart IV is also known as IOEDC: I/O Error Detection Code.
Native Command Queuing
NCQ or Native Command Queuing is a SATA protocol extension that allows the hard drive to have several write or read commands
outstanding at the same time. In contrast, normal non-queued operation requires each command to be completed before the next
command is issued by the host system. Queuing allows the drive to complete the commands in the order that allows for best overall
throughput. It also involves an advanced method of transferring data to or from the host, called First Party Direct Memory Access
(FPDMA), which allows the hard drive and the host controller to manage the data transfers for multiple outstanding commands, without
involving the host processor. NCQ can contribute to better performance but the results are dependent on many factors, including the
access patterns of the various applications and operating system functions that are initiating drive accesses. Enabling NCQ features in
the hard drive requires AHCI support from the host system BIOS, controller, and driver. AHCI support is typically implemented in RAID
configurations.
NOTE: GB = 1 billion bytes. Actual available capacity is less.
QuickSpecs HP rp5800 Retail System
Technical Specifications - Data Storage Drives
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 31
Page: 31
HP Solid State Drives
Unformatted Capacities 128-GB and 160-GB
Architecture Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Interface Serial ATA (SATA)
Dimensions (W x H x D) 2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm
Weight 0.18 lb/80 g
Bandwidth Performance Sustained Sequential Read: Up to 250 MB/s
Sustained Sequential Write: Up to 70 MB/s
Random Read: Up to 35K IOPs
Random Write: Up to 6.6K IOPs
Latency Read: 65-ms
Write: 85-ms
Power DC power requirement: 5 VDC 5%-100 mV ripple p-p
Total power consumption: 0.15W (active); 0.075W (idle)
Useful Drive Life 35TB written, up to 20GB/day for 5 years
Environmental
(all conditions, non-condensing)
Operating Temperature: 32° to 158° F (0° to 70° C)
Relative Humidity: 5% to 95%
Maximum Wet Bulb
Temperature (operating):
84° F (29° C)
Shock: 1,500 G/0.5-ms
NOTE:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
HP 250-GB Hard Disk Drive (3.5”)
Capacity 250,059,350,016 bytes
Rotational Speed 7,200 rpm
Interface Serial ATA (SATA) 3.0
Synchronous Transfer Rate
(maximum)
Up to 6 GB/s
Buffer Size 8 MB
Logical Blocks 488,397,168
Seek Time (typical reads,
includes controller overhead,
including settling)
Single Track: 1.0 ms
Average: 8.5 ms
Full-Stroke: 18 ms
Height (nominal) 1 in/2.54 cm
Width (nominal) Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
Operating Temperature 41° to 131° F (5° to 55° C)
QuickSpecs HP rp5800 Retail System
Technical Specifications - Data Storage Drives
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 32
Page: 32
HP 500-GB Hard Disk Drive (3.5”)
Capacity 500,107,862,016 bytes
Rotational Speed 7,200 rpm
Interface Serial ATA (SATA) 3.0
Synchronous Transfer Rate
(maximum)
Up to 6 GB/s
Buffer Size 16 MB
Logical Blocks 976,773,168
Seek Time (typical reads,
includes controller overhead,
including settling)
Single Track: 2.0 ms
Average: 11 ms
Full-Stroke: 21 ms
Height (nominal) 1 in/2.54 cm
Width (nominal) Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
Operating Temperature 41° to 131° F
5° to 55° C
HP 1-TB Hard Disk Drive (3.5”)
Capacity 1,000,xxxxx bytes
Rotational Speed 7,200 rpm
Interface Serial ATA (SATA) 3.0
Synchronous Transfer Rate
(maximum)
Up to 6 GB/s
Buffer Size 16 MB
Logical Blocks 976,773,168
Seek Time (typical reads,
includes controller overhead,
including settling)
Single Track: 2.0 ms
Average: 11 ms
Full-Stroke: 21 ms
Height (nominal) 1 in/2.54 cm
Width (nominal) Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
Operating Temperature 41° to 131° F
5° to 55° C
QuickSpecs HP rp5800 Retail System
Technical Specifications - Data Storage Drives
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 33
Page: 33
HP Blu-ray Writer Drive
Height 5.25-inch, half-height, tray-load
Orientation Either horizontal or vertical
Interface type SATA/ATAPI
Disc capacity 128 GB QL, 100 GB TL, 50 GB DL or 25 GB standard
Dimensions
(W x H x D)
5.9 x 1.7 x 7.5 in
15.0 x 4.4 x 19.0 cm
Weight
(max)
2.0 lb
907g
Write Speeds Single-layer Double-layer
BD-R 2x, 4x CLV, 6x CAV 2x, 4x CLV, 6x PCAV
BD-RE 2.3x 2x CLV
DVD-R 2x, 4x CLV, 8x ZCLV, 8x, 12x
PCAV, 16x CAV
2x, 4x CLV, 8x PCAV
DVD-RW 1x, 2x, 4x, 6x CLV Not supported
DVD+R 2.4x, 4x CLV, 8x ZCLV, 8x, 12x
PCAV, 16x CAV
2.4x, 4x CLV, 8x PCAV
DVD+RW 2.4x, 4x, 6x CLV, 8x ZCLV Not supported
DVD-RAM 2x, 3x, 5x CLV
CD-R 8x,16x CLV, 24x, 32x PCAV, 40x CAV
CD-RW 4x, 10x, 16x CLV, 24x ZCLV
Read Speeds Single-layer Double-layer
BD-ROM 8x CAV 8x CAV
BD-R 8x CAV 8x CAV
BD-RE (SL/DL) 6x CAV 6x CAV
DVD-ROM 16x CAV 8x CAV
DVD-R 16x CAV 8x CAV
DVD-RW 10x CAV Not support
DVD+R 16x CAV 8x CAV
DVD+RW 10x CAV Not support
BDMV (AACS Compliant Disc) 8x CAV
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 34
Page: 34
DVD-RAM 2x, 3x, 5x CLV
DVD-Video (CSS Compliant
Disc)
8x CAV
CD-R/RW/ROM 40x / 40x / 40x CAV
CD-DA (DAE) 32x CAV
80 mm CD 11.5x CAV
Sustained Transfer rate BD-ROM 35.977 MB/s (8x) max.
DVD-ROM 22.16 MB/s (16x) max.
CD-ROM 6,000 KB/s (40x) max.
Buffer Transfer Rates 1.5Gbps bits/s (10b side)
1.2Gbps bits/s (8b side)
Multimedia MPC-3 compliant Yes
Access times
(typical reads, including setting)
Random DVD: < 140 ms (typical), CD: < 125 ms (typical)
Full Stroke DVD: < 250 ms (seek), CD: < 210 ms (seek)
Power Source SATA DC power receptacle
DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
DC Current 5 VDC -1000 mA typical, 1600 mA maximum
12 VDC -600 mA typical, 1400 mA maximum
Environmental
(all conditions
non-condensing)
Temperature (operating) 41° to 122° F (5° to 50° C)
Relative Humidity (operating) 10% to 90%
Maximum Wet Bulb
Temperature (operating)
86° F (30° C)
HP SuperMulti DVD Writer Drive
Height 5.25-inch, half-height, tray-load
Orientation Either horizontal or vertical
Interface type SATA/ATAPI
Disc capacity 8.5 GB DL or 4.7 GB standard
Dimensions (W x H x D) 5.9 x 1.7 x 8.0 in (15.0 x 4.4 x 20.3 cm)
Weight (max) 2.6 lb (1.2 kg)
Write speeds DVD-RAM Up to 5X
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 35
Page: 35
DVD+R Up to 16X
DVD+RW Up to 8X
DVD+R DL Up to 8X
DVD-R DL Up to 8X
DVD-R Up to 16X
DVD-RW Up to 6X
CD-R Up to 40X
CD-RW Up to 24X
Read speeds DVD-RAM Up to 12X
DVD+RW, DVD-RW, DVD+R DL,
DVD-R DL
Up to 8X
DVD-ROM DL Up to 8X
DVD-ROM, DVD+R,
DVD-R
Up to 16X
CD-ROM, CD-R Up to 40X
CD-RW Up to 32X
Access time
(typical reads, including
settling)
Random DVD: < 140 ms (typical), CD: < 125 ms (typical)
Full Stroke DVD: < 250 ms (seek), CD: < 210 ms (seek)
Power Source SATA DC power receptacle
DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
DC Current 5 VDC (< 1000 mA typical, 1600 mA maximum)
12 VDC (< 600 mA typical, 1400 mA maximum)
Environmental conditions
(operating - non-condensing)
Temperature 41° to 122° F (5° to 50° C)
Relative Humidity 10% to 90%
Maximum Wet Bulb
Temperature
86° F (30° C)
HP DVD-ROM Drive
Height 5.25-inch, half-height, tray-load
Orientation Either horizontal or vertical
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 36
Page: 36
Interface type SATA/ATAPI
Disc capacity Single layer: Up to 4.7 GB (6 times capacity of CD-ROM)
Double layer: Up to 8.5 GB (12 times capacity of CD-ROM)
Dimensions (W x H x D) 5.9 x 1.7 x 8.0 in (15.0 x 4.4 x 20.3 cm)
Weight (max) 2.6 lb (1.2 kg)
Read speeds DVD+R/-R/+RW/
-RW/+R DL /-R DL
Up to 8X
DVD-ROM Up to 16X
DVD-RAM Up to 5X
CD-ROM, CD-R Up to 40X
CD-RW Up to 32X
Removable Storage - Media
Compatibility - DVD-ROM
Media Read Write
CD-ROM Yes No
CD-R Yes No
CD-RW Yes No
DVD-ROM Yes No
DVD-ROM DL Yes No
DVD-RAM Yes No
DVD+R Yes No
DVD+R DL Yes No
DVD+RW Yes No
DVD-R Yes No
DVD-RW Yes No
DVD-R DL Yes No
Access times
(typical reads, including setting)
Random DVD: < 140 ms (typical), CD: < 125 ms (typical)
Full Stroke DVD: < 250 ms (seek), CD: < 210 ms (seek)
Cache Buffer 2 MB (minimum)
Data Transfer Modes ATA PIO mode 4 (16.7 MB/s); ATA Multi-word DMA mode 2 (16.7
MB/s); ATA UltraDMA Mode 3 (44.4 MB/s -default)
Power Source SATA DC power receptacle
DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 37
Page: 37
DC Current 5 VDC - <1000 mA typical, < 1600 mA maximum
12 VDC -< 600 mA typical, < 1400 mA maximum
Environmental
(all conditions
non-condensing)
Temperature 41° to 122° F (5° to 50° C)
Relative Humidity 10% to 90%
Maximum Wet Bulb
Temperature
86° F (30° C)
HP 22-n-1 Media Card Reader
USB Interface USB 2.0 High-speed interface
NOTE:
Requires the USB cable to be connected to the internal USB 2.0 port or a USB 2.0 PCI card.
Advance protocol support Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
Supports MS 4-bit parallel transfer mode
Supports MS-PRO 4-bit parallel transfer mode
Supports MS PRO-HG Duo 4-bit parallel transfer mode
Supports SD 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 2.0)
Supports high-speed 52Mhz MMC 8-bit card (version 4.2)
Supports CF v4.0 with PIO mode 6 and Ultra DMA mode
Supported media type CompactFlash Type I
CompactFlash Type II
Microdrive
MultiMediaCard (MMC)
Reduced Size MultiMediaCard (RS MMC)
MultiMediaCard 4.2 (MMC Plus, including MMC Plus HC)
Reduced Size MultiMediaCard 4.2 (MMC Mobile, including MMC Mobile HC)
Secure Digital Card (SD)
Secure Digital High Capacity (SDHC)
miniSD
miniSD High Capacity
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 38
Page: 38
Micro SD (T-Flash)
Micro SD HC
Memory Stick
Memory Stick Select
Memory Stick Duo (MS Duo)
Memory Stick PRO (MS PRO)
Memory Stick PRO Duo (MS PRO Duo)
Memory Stick PRO-HG Duo
MagicGate Memory Stick (MG)
MagicGate Memory Stick Duo
xD-Picture Card
Supported media type with
card adapter
Memory Stick Micro (M2)
MMC Micro
QuickSpecs HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 39
Page: 39
HP USB Standard Keyboard
Physical characteristics Keys 104, 105, 106, 107, 109 layout (depending upon country)
Dimensions
(L x W x H)
18.0 x 6.4 x 0.98 in
45.8 x 16.3 x 2.5 cm
Weight 2 lb
0.9 kg
Electrical Operating voltage + 5VDC ± 5%
Power consumption 50-mA maximum (with three LEDs ON)
System interface USB Type A plug connector
ESD CE level 4, 15-kV air discharge
EMI - RFI Conforms to FCC rules for a Class B computing device
Microsoft® PC 99 - 2001 Functionally compliant
Mechanical Languages 38 available
Keycaps Low-profile design
Switch actuation 55-g nominal peak force with tactile feedback
Switch life 20 million keystrokes (using Hasco modified tester)
Switch type Contamination-resistant switch membrane
Key-leveling mechanisms For all double-wide and greater-length keys
Cable length 6 ft (1.8 m)
Microsoft PC 99 - 2001 Mechanically compliant
Acoustics 43-dBA maximum sound pressure level
Environmental Operating temperature 50° to 122° F (10° to 50° C)
Non-operating temperature -22° to 140° F (-30° to 60° C)
Operating humidity 10% to 90% (non-condensing at ambient)
Non-operating humidity 20% to 80% (non-condensing at ambient)
Operating shock 40 g, six surfaces
Non-operating shock 80 g, six surfaces
Operating vibration 2-g peak acceleration
Non-operating vibration 4-g peak acceleration
Drop (out of box) 26 in (66 cm) on carpet, six-drop sequence
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 40
Page: 40
Drop (in box) 42 in (107 cm) on concrete, 16-drop sequence
Approvals UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC
Ergonomic compliance ANSI HFS 100, ISO 9241-4, and TUVGS
Kit contents Keyboard Installation Guide
Warranty Card Safety and Comfort Guide
HP PS/2 Standard Keyboard
Physical characteristics Keys 104, 105, 106, 107, 109 layout (depending upon country)
Dimensions
(L x W x H)
18.0 x 6.4 x 0.98 in (45.8 x 16.3 x 2.5 cm)
Weight 2 lb (0.9 kg) minimum
Electrical Operating voltage + 5VDC ± 5%
Power consumption 50-mA maximum (with three LEDs ON)
System interface PS/2 6-pin mini din connector
ESD CE level 4, 15-kV air discharge
EMI - RFI Conforms to FCC rules for a Class B computing device
Microsoft® PC 99 - 2001 Functionally compliant
Mechanical Languages 38 available
Keycaps Low-profile design
Switch actuation 55-g nominal peak force with tactile feedback
Switch life 20 million keystrokes (using Hasco modified tester)
Switch type Contamination-resistant switch membrane
Key-leveling mechanisms For all double-wide and greater-length keys
Cable length 6 ft
1.8 m
Microsoft PC 99 - 2001 Mechanically compliant
Acoustics 43-dBA maximum sound pressure level
Environmental Operating temperature 50° to 122° F (10° to 50° C)
Non-operating temperature -22° to 140° F (-30° to 60° C)
Operating humidity 10% to 90% (non-condensing at ambient)
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 41
Page: 41
Non-operating humidity 20% to 80% (non-condensing at ambient)
Operating shock 40 g, six surfaces
Non-operating shock 80 g, six surfaces
Operating vibration 2-g peak acceleration
Non-operating vibration 4-g peak acceleration
Drop (out of box) 26 in (66 cm) on carpet, six-drop sequence
Drop (in box) 42 in (107 cm) on concrete, 16-drop sequence
Approvals UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC
Ergonomic compliance ANSI HFS 100, ISO 9241-4, and TUVGS
HP USB Smart Card (CCID) Keyboard
Introduction:
Boost your security, simplify access procedures and reduce the costs associated with managing networks by preventing unauthorized
access to your computers and networks using smartcard technology with the HP Smart Card (CCID) Keyboard.
The USB Smart Card (CCID) Keyboard is a full-sized keyboard that takes advantage of digital signatures and certificates to secure the
environment for transactions performed on both public and private networks. The USB Smart Card (CCID) Keyboard works with all
smart cards that comply with ISO standard 7816.
Smart cards are easy-to-use credit card-sized devices which require multiple forms of information to be validated before you gain
access to your accounts or resources. Used worldwide, smart cards strengthen access to a network or other resource using dual-
factor authentication. Implementing a two-factor authentication (or multi-factor authentication) process reduces the risk of
unauthorized access by verifying and validating your identity in one of the following ways:
Something you know – a combination of username and password or PIN
Something you have – a smart card or security token.
Something you have (smart card) plus something you know (PIN), improves user-access security within corporate network
environments. Smart cards are used in government agencies, healthcare companies and the finance industry.
HP ProtectTools Smart Card Manager provides authentication software for the smart card. The Smart Card Reader module works with
the HP ProtectTools Security Manager and enables the user to setup, use, and manage the smart card. This allows strengthened
security with HP patented technology.
Key Benefits: Protects against unauthorized access with smart card technology
Delivers even greater security when combined with a HP ProtectTools smart card and the HP
ProtectTools Security Software
Combination of username and password or pin with a smart card or security token
Secures online transactions using digital signatures and certificates
Conforms to industry standards for ease of setup and use
Delivers long product life and quiet operation with high-impact materials and lubricated keys
Spill drain feature
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 42
Page: 42
Physical Characteristics Keys 104, 105, 106, 107, 109 layout
(depending upon country
Form factor USB basic smart card keyboard
Colors Carbonite/Silver
Dimensions
(H x W x D)
18.2 x 6.3 x 1.3 in
46.3 x 16.1 x 3.3 cm
Weight 2 lb (0.9 kg) minimum
Electrical Operating voltage + 5VDC ± 5%
Power consumption 100-mA maximum (with four LEDs ON)
System interface USB Type A plug connector
ESD CE level 4, 15-kV air discharge
EMI - RFI Conforms to FCC rules for a Class B computing device
Microsoft PC 99 - 2001 Functionally compliant
Mechanical Languages 30+ available
Keycaps Standard design
Switch actuation 55 g nominal peak force with tactile feedback
Switch life 20 million keystrokes
(using Hasco modified tester)
Switch type Contamination-resistant membrane
Key-leveling mechanisms For all double-wide and greater-length keys
Cable length 6 ft (1.8 m)
Microsoft PC 99 - 2001 Mechanically compliant
Acoustics 43-dBA maximum sound pressure level
Environmental Operating temperature 50° to 122° F (10° to 50° C)
Non-operating temperature -22° to 140° F (-30° to 60° C)
Operating humidity 10% to 90% (non-condensing at ambient)
Non-operating humidity 20% to 80% (non-condensing at ambient)
Operating shock 40 g, six surfaces
Non-operating shock 80 g, six surfaces
Operating vibration 2-g peak acceleration
Non-operating vibration 4-g peak acceleration
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 43
Page: 43
Drop
(out of box)
26 in (66 cm) on carpet, six-drop sequence
Drop
(in box)
42 in (107 cm) on concrete, 16-drop sequence
SmartCard Function Support All ISO 7816 smart cards
Interface Reads from and writes to all ISO7816-1, 2, 3, 4 memory and
microprocessor smart cards (T=0, T=1)
Chipset SCM STCIII
Standard APIs supported PC/SC, EMV2000, CT-API
Power USB Port
Short circuit detection (protects smart card and reader)
Power supply compliant with ISO7816 and EMV (5V, 60 mA)
Supports 3-V and 5-V cards
Power consumption 100-mA maximum draw
Communication From card 9600 bps to 330,000 bps
From computer 12 Mbps (USB transfer speed)
Landing mechanism Contact device Friction contact
Card insertions rating Up to 100,000 insertion cycles
Interface modes CCID protocol
Reader performance interface USB connection
Electro-magnetic standards Europe 2004/108/EC
USA USAFCC part 15
Approvals CE-Mark, UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC, EMV2000, USB-IF
Ergonomic Compliance ISO 9241-4, TUVGS
Kit Contents Keyboard, I/O Security and Documentation CD, warranty card
Smart Card Compatibility HP HP ProtectTools Smart Card
American Express Amex Blue
Axalto (Schlumberger) Cryptoflex 8K
Cryptoflex 16K
Cryptoflex 32K
Cryptoflex 32K e-gate
Cyberflex Access 64K
Cyberflex Access 32K
Cyberflex 32K e-gate
Cyberflex 64K
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 44
Page: 44
Cyberflex Palmera
Payflex-S
Payflex 1K
Payflex 2K
Payflex 4K
Payflex 8K
Prismera
US DoD CAC
PrimeFlex Store 8K
PrimeFlex Store 2K
Cardlogix CLXSU004KK4
CLXSU008KK5
Safenet, Inc. Model 300
Model 330
De-La Rue VisaCash
Gemplus Gem Expresso
GKK32K
Gemclub Memo
GemClub Micro
GemXplore
GemSafe
Infineon SLE66C322P
SLE4406
SLE4406E
SLE4406E SE
SLE4418
SLE4428
SLE4432
SLE4436E
SLE4442
SLE5536
SafLink (Litronic) Forte
Shart Java Card
Oberthur CosmopollIC v4
CosmopollIC v4.1
Cosmo ID-One
GalatIIC v2.1
US DoD CAC
Memory Cards
Atmel AT24C01ASC
AT24C02SC
AT24C04SC
AT24C08SC
AT24C16SC
AT24C32SC
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 45
Page: 45
AT24C64SC
AT24C128SC
AT24C256SC
AT24C512SC
AT88SC153
AT88SC1608
ISSI IS23SC4418
IS23SC4428
ST 14C02
Telefonkarte SLE4406
SLE4436
SLE5536
XICOR X24026
HP USB & PS2 Washable Keyboard
Physical characteristics Keys 104, 105, 106, 107, 109 layout (depending upon country)
Dimensions
(L x W x H)
18.0 x 6.4 x 0.98 in
45.8 x 16.3 x 2.5 cm
Weight 2 lb (0.9 kg) minimum
Electrical Operating voltage + 5VDC ±5%
Power consumption 50-mA maximum (with three LEDs ON)
System interface USB Type A plug connector
ESD CE level 4, 15-kV air discharge
EMI - RFI Conforms to FCC rules for a Class B computing device
Microsoft® PC 99 - 2001 Functionally compliant
Mechanical Keycaps Stepped -profile design
Switch actuation 55-g nominal peak force with tactile feedback
Switch life 20 million keystrokes
Switch type Contamination-resistant switch membrane
Key-leveling mechanisms For all double-wide and greater-length keys
Cable length 7 ft
2.2 m
Microsoft PC 99 - 2001 Mechanically compliant
Acoustics 43-dBA maximum sound pressure level
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 46
Page: 46
Environmental Operating temperature 50° to 122° F
10° to 50° C
Non-operating temperature -4° to 149° F
-20° to 65° C
Operating humidity 10% to 95% (non-condensing at ambient)
Non-operating humidity 0% to 95% (non-condensing at ambient)
Operating shock 40 g, six surfaces
Non-operating shock 80 g, six surfaces
Operating vibration 2-g peak acceleration
Non-operating vibration 4-g peak acceleration
Drop (out of box) 26 in (66 cm) on carpet, six-drop sequence
Drop (in box) 42 in (107 cm) on concrete, 16-drop sequence
Approvals UL, cUL, FCC, CE, TUV GS, VCCI, BSMI, C-Tick, KCC, USB-IF, WHQL, EN/IEC 60601-1, IP66/NEMA4X
Ergonomic compliance ANSI HFS 100, ISO 9241-4, and TUVGS
HP PS/2 Optical Mouse
Dimensions
(H x L x W)
1.56 x 2.44 x 4.61 in
3.95 x 6.21 x 11.7 cm
Weight 4.44 oz
126 g
Environmental Operating temperature -32° to 104°F
0° to 40° C
Non-operating temperature -4° to 140°F
-20° to 60° C
Operating humidity 10% to 90%
(non condensing at ambient)
Non-operating humidity 10% to 90%
(non condensing at ambient)
Operating shock 40 g, 6 surfaces
Non-operating shock 80 g, 6 surfaces
Operating vibration 2 g peak acceleration
Non-operating vibration 4 g peak acceleration
Drop
(out of box)
80 cm height onto asphalt tile over concrete or equivalent, 5-drop
in 5 direction except the cable face
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 47
Page: 47
Electrical Operating voltage 5 VDC ± 10%
Power consumption 100mA
System consumption PS/2 mini-din connector
ESD CE level 4, 15 kV air discharge
EMI-RFI Conforms to FCC rules for a Class B computing device
Microsoft PC99 - 2001 Functionally compliant
Mechanical Resolution 400 ± 20% DPI
Tracking speed 10 in/s (25.4 cm/s) maximum
Acceleration 100 in/s/s (2.54 m/s/s)
Switch actuation 61 g nominal peak force
Switch life 3,000,000 operations (using Hasco modified tester)
Switch type Low force micro-switches
Tracking mechanism life 155 mi (250 km) at average speed of 10 in/s
Cable length 6 ft (1.8 m)
Microsoft PC99 - 2001 Mechanically compliant
Scroll wheel Width 8 mm
Diameter 1.01 in (25.6 mm)
Maximum rotation speed 48 rats/sec
Switch type Light force micro-switch
Switch life 1 million operations
Mechanical life Minimum 200,000 revolutions
Regulatory Approvals UL, CSA, FCC, CE Mark, TUV, TUV GS, VCCI, BSMI, C-Tick, MIC
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 48
Page: 48
HP USB Optical Mouse
Dimensions
(H x L x W)
1.5 x 4.5 x 2.5 in
3.8 x 11.6 x 6.3 cm
Weight 0.27 lb
0.12 kg
Cable length 72.8 in
185 cm
System requirements Microsoft Windows 95, 98, 2000, Me, XP and Vista
Available USB port
HP USB Laser Mouse
Scroll Wheel 24
Maximum Rotation Speed 48 rats/sec
Switch Type Wheel
Switch Life Button - 3,000,000
Wheel - 1,000,000 times
Tilt switch - 500,000 times
Environmental Operating Temperature 32° to 104° F
0° to 40° C
Non-operating Temperature -4° to 140° F
-20° to 60° C
Operating Humidity 10% to 90%
(non-condensing at ambient)
Non-operating Humidity 20% to 80%
(non-condensing at ambient)
Operating Shock 40 g, six surfaces
Non-operating Shock 80 g, six surfaces
Operating Vibration 2-g peak acceleration
Non-operating Vibration 4-g peak acceleration
Electrical Operating Voltage + 5VDC ± 5%
Power Consumption
MTBF > 150,000 hrs
ESD IEC-61000-4-2 criteria B, Contact discharge: +/- 4kV, Air
discharge: +/- 8kV
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 49
Page: 49
EMI-RFI FCC Class B
PC98 PC 99 Compliant
Mechanical Resolution 800dpi
Tracking Speed 25 cm/sec
Acceleration 0.5mm
Switch Actuation 0.6N (60gf)
Switch Life Button - 3,000,000
Wheel - 1,000,000 times
Tilt switch - 500,000 times
Cable Length 1850mm
PC98-99 PC99 compliant
Regulatory Approvals UL60950-1, UL 94, UL 746 (A-E), UL 796
TUV/GS: EN 60950-1, EN 60825-1
FCC Class B, UL 1950, cUL, TUV GS, CE, C-tick, VCCI, BSMI, RRL
QuickSpecs HP rp5800 Retail System
Technical Specifications - Input/Output Devices
DA - 13982 Worldwide — Version 9 — October 24, 2012 Page 50

Question & answers

There are no questions about the HP rp 5800 yet.

Ask a question about the HP rp 5800

Have a question about the HP rp 5800 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the HP rp 5800. Please make sure that you describe your difficulty with the HP rp 5800 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.