2 I GB
UV-C BULB COVER
ALL-IN-ONETRUE HEPA FILTER
FAN SPEED IONISER
ALL-IN-ONETRUE HEPA FILTRATION SYSTEM
TRUE HEPA FILTRATION
Removes up to 99.97% of airborne particles as small as 0.3
microns, such as allergens, pollen, dust, germs, pet dander,
odour, mould spores, and smoke from air that passes through
CARBON ODOUR FILTRATION
Reduces household odours andVOCs (volatile organic
compounds)/gases as shown by independent laboratory
Captures large particles.
When on, the UV-C technology light kills germs, viruses, and
When on, the ioniser assists in the air purification process.
Low, medium, and high.
Choose from 2, 4, 8, or 12 hours.
REPLACE FILTER INDICATOR
Illuminates when it is time to replace the filter.
SUGGESTED ROOM SIZE
/H / 888 FT2
/H. Portable air purifiers will be more
AIR CHANGES PER HOUR
This air purifier will purify the air in a 84 M2
(assuming an 2.43 M/8 FT ceiling) once per hour on high
speed in a closed room.The airflow rate is 204.1M3
Includes 3 essential oil pads. Use with essential oil (not
included) to deliver scent into the air.
GB I 3
BEFORETURNINGTHE UNIT ON
• Take the air purifier out of the box and remove the clear
protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a standard AC outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power button.
• This air purifier has 3 fan speed settings: low (1), medium (2),
and high (3).The higher the fan speed setting, the faster the
air will be purified.To select or change fan speed, press the fan
speed button until the desired setting is reached.
The optional UV-Ctechnology kills germs, viruses, and bacteria
by penetrating its DNA, resulting in the microorganism’s death or
the inability to reproduce. Press the UV-Cbutton to turn the UV-C
technology on.The blue LED will glow. Press the UV-C button
again to turn the UV-C technology off.
IONISER SETTINGWITH ON/OFF
Ion particles have a positive or negative charge that attach to
airborne particles, making them easier to be captured by the
filtration system. Press the ioniser ION button to turn the ioniser
on.The blue light will glow to indicate the ioniser is in use. Press
the ioniser ION button again to turn the ioniser off.
NOTE: Dust particles may accumulate on surfaces around the
air purifier when the ioniser is in use.These dust particles can be
vacuumed or wiped away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ioniser
is used.This is normal.
NOTE: The ioniser produces less ozone than the UL-established
limits of 0.05 ppm. Ozone may be harmful around birds and
small pets.To prevent ozone buildup, use the ioniser feature in a
The nightlight has 3 options. Press the nightlight button
once to turn the blue nightlight on. Press again to turn the blue
nightlight ring and the display lights off. Press a third time to turn
the display lights on.
Press the timer button until the desired timer setting is lit on
the display.The timer button will cycle through the following
settings: 2 hours, 4 hours, 8 hours, 12 hours, and off.To cancel
the timer at any time, press the timer button until all timer
LEDs are off.The air purifier will run continuously when the timer
function is off.
Use essential oil (not included) to deliver scent into the air.
NOTE: For use with the included HoMedics essential oil pads only.
Do not add essential oils anywhere else in the unit as it may cause
NOTE: Do not leave a filled essential oil pad in the air purifier if it
will be out of use for a long period of time.
ARE ESSENTIAL OILS SAFETO USE AROUND PETS?
We should always exercise caution when using essential oils
around our pets. Keep all essential oil and aromatherapy
products (like diffusers) out of reach of pets. Keep open bottles
away from pets to avoid internal consumption.We do not
recommend the topical use of essential oils on pets, as they have
a strong sense of smell and cannot get rid of the oil if they don’t
like it or it is disturbing them.When diffusing essential oils around
pets, always diffuse in a well-ventilated area and leave an option
for them to remove themselves from the space, such as leaving a
door open. Every animal is different, so carefully observe how each
animal responds when introducing an essential oil for the first
time. If irritation occurs, discontinue the use of the essential oil.
We recommend seeking medical attention if ingestion of essential
ADDING ESSENTIAL OILS
This air purifier has been certified by the European Centre for
Allergy Research Foundation (ECARF) as an allergy-friendly
product. Please note that allergy friendliness is no longer
guaranteed if the Essential Oil ScentTray function is used, since
essential oils may lead to allergic reactions.
WARNING: Putting oil anywhere but the oil tray will damage the
1.The oil tray is located on the side of the
air purifier above the nightlight
2. Push to open and remove the tray.
3. Place 1 aroma pad (3 included) into
the oil tray.
4. Add 5–7 drops of essential oil to the
pad.You may use more or less
depending on personal preference.
5. Place the oil tray back in its
compartment and push to close.
The scent will start automatically
when the air purifier is turned on.
4 I GB
REPLACE FILTER LIGHT
The replace filter light illuminates when it is time to replace the
True HEPA filter based on the air purifier’s hours of use.
REPLACINGTHE TRUE HEPA FILTER
For optimal performance, replace every 12 months under normal
1. Unplug the air purifier. Pull the
indents on each side of the grille
2. Remove the grille cover and set
3. Pull the tabs to remove the old
4.With the filter tabs facing outward,
insert the newTrue HEPA filter.
5. Place the tabs at the bottom
of the grille cover into the
base of the air purifier. Gently
push the grille cover until it
snaps into place.
6. Plug the power cord into a standard
AC outlet and press the power
button Press and hold the ioniser
ION button for 3 seconds to reset
UV-C BULB REPLACEMENT
REPLACINGTHE UV-C BULB
The UV-C bulb is designed to last for approximately 10,000 hours
of use.The UV-C button on the control panel will flash RED when
the UV-C bulb burns out and needs to be replaced.The UV-C button
will change to blue once the bulb has been replaced.
NOTE: The air purifier will continue to operate without the UV-C
function when the UV-C bulb burns out.
CAUTION: Do not operate the air purifier without the
protective UV-C bulb cover.
CAUTION: Unplug the power cord before servicing or
replacing the UV-C bulb.
1. Unplug the air purifier and remove
theTrue HEPA filter. Using a
Phillips-head screwdriver (not
included), unscrew the 2 screws
located on the UV-C bulb cover.
2. Remove the cover to expose the
3. Gently push from the sides and
rotate the UV-C bulb to remove.
4. Remove and replace the UV-C bulb.
Re-install the UV-C bulb cover,
True HEPA filter, and grille cover.
NOTE:The UV-C bulb contains mercury (Hg).
GB I 5
NOTE: For best performance,
vacuum the pre-filter once a
month under normal usage.
1. Unplug the air purifier.
2. Remove theTrue HEPA-type
filter as described in the
Replacing theTrue HEPA filter
3. Vacuum the outside of the
True HEPA filter using the brush attachment of your vacuum
cleaner, cleaning it thoroughly.
4. Place theTrue HEPA filter back into the air purifier and close
5. Plug the power cord into a standard AC outlet.
TO CLEANTHE OILTRAY
Open the oil tray and remove the
pad. Essential oil pads should be
changed when switching to a
different essential oil scent. If
continuing to use the same scent,
set the essential oil pad aside for
reuse.Wipe down the inside of
the oil tray with a soft cloth. Place the essential oil pad back in the
tray and close.
NOTE: Leave the essential oil pad out of the oil tray when storing.
FOR BEST PERFORMANCE
• NEVER use water or any household cleaners or detergents to
clean theTrue HEPA filter.
• Clean off the outside of the unit with a dry cloth as needed.
• NEVER use water, wax, polish, or any chemical solution to clean
the outside of the unit.
• Clean off the grille cover using a damp cloth or the brush
attachment of your vacuum as needed.
• Vacuum the pre-filter monthly under normal usage conditions.
• Replace theTrue HEPA filter every 12 months under normal
• Always use a genuine HoMedics replacement filter for optimal
To purchase genuine HoMedics replacement/spare parts please
3 Pack of aroma pads - ARM-PAD3
Aroma tray - AP-T30WTARM
HEPA filter - AP-T30FL
UV-C Bulb – AP-UVC1
Cover & screws - APUVCCV
CLEANING & MAINTENANCE
PROBLEM POSSIBLE CAUSE SOLUTION
Unit will not operate • Unit is not plugged in
• Power button not pressed
• No power to unit
• True HEPA filter is not installed correctly
• Grille cover is not installed correctly
• Plug unit in
• Press the power button to turn the power on
• Check fuses, try a different outlet
• Reinstall theTrue HEPA filter
• Reinstall the grille cover
Reduced airflow • The back grille may be blocked
• Pre-filter needs vacuuming
• Check to make sure nothing is blocking the back
grille and air outlet
• Vacuum the pre-filter with the brush
attachment of your vacuum cleaner
• Replace theTrue HEPA filter
Reduced odour removal • TheTrueHEPAfilterneedstobereplaced • Replace theTrue HEPA filter
Excessive noise • The unit is not level • Place the unit on a flat, level surface
Replace filter light remains lit
after filter replacement
• The replace filter indicator needs to be
• Press and hold the ioniser button for 3 seconds
until the replace filter light turns off
Display lights are off • Nightlight setting • Press the nightlight button until the desired
lights are on/off
FKA Brands Ltd
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
Customer Support: +44(0) 1732 378557