HLP21N manual
Haier HLP21Nmanual

User manual for the Haier HLP21N in English. This PDF manual has 82 pages.

PDF 82 1.1mb

View a manual of the Haier HLP21N below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

MANUALSCAT | EN

Question & answers

Have a question about the Haier HLP21N but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Haier HLP21N. Please make sure that you describe your difficulty with the Haier HLP21N as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Haier HLP21N

Page: 1
DANGER Risk of child entrapment. Before throwing away your old appliance, remove the door so that children may not easily become trapped inside. Thank you for purchasing our Haier product. This easy-to-use manual will guide you in getting the best use of your washer. Remember to record the model and serial number. They are on a label in back of the washer. 1 UNPACKING YOUR WASHING MACHINE English 1. Inspect and remove all packing materials. This includes the foam and any adhesive tape both inside and outside of the unit. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the Washer. PRODUCT REGISTRATION Staple your receipt to your manual. You will need it to obtain warranty service. Please register your product online at www.prodregister.com/haier 1 1 Model number Serial number Date of purchase
Page: 2
IMPORTANT SAFETY INSTRUCTIONS Warning – To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this use and care guide. 3. Use only detergents or softeners as recommended for use in this manual and keep them out of the reach of children. 4. This appliance must be properly installed in accordance with the installation instructions before it is used. 5. Never unplug your appliance by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. 6. Replace immediately any worn power cords, loose plugs and power outlets. 7. Unplug your appliance before cleaning or before making any repairs. 8. If your old appliance is not being used, we recommend that you remove the door. This will reduce the possibility of danger to children. 9. Do not operate your appliance in the presence of explosive fumes. 10. Do not use this appliance to wash clothes that have been soaked, spotted or washed in gasoline, dry cleaning solvents or any other explosive or flammable substances that may ignite and explode. 11. Clothes or rags used to clean flammable or explosive materials should not be washed in this appliance until all traces of this material have been removed. 12. Do not add or mix any flammable or explosive substances to the wash. 13. Do not try to remove clothes while the tub is moving. Allow it to come to a complete stop before reaching in. 14. The appliance’s loading door must be closed when the tub is spinning. 15. Do not operate your appliance when parts are missing or broken. 16. Do not use this appliance for commercial uses. 17. Do not operate this appliance unless all enclosure panels are properly in place. 18. Do not tamper with controls. 19. To reduce the risk of injury, do not allow children to play in or on the appliance. Close supervision of children is necessary when the appliance is used near children. 2 English
Page: 3
20. This appliance must be connected to a proper electrical outlet with the correct electrical supply. 21. Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a three-prong electric receptacle outlet in the wall, have a certified electrician install the proper receptacle. The wall receptacle MUST be properly grounded. 22. Hydrogen gas may be produced if the water heater has not been used in more than 2 weeks. This may be explosive under certain circumstances. If this is the case turn on all the hot faucets and let the hot water run for a few minutes before using this appliance. This will let the trapped hydrogen escape. Avoid accidents during this process by refraining from turning ON any electrical appliances, smoking, lighting a match/lighter, or using flames. 23. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-repair instructions, which you understand and have the skill to carry out. If for any reason this product requires service, we strongly recommend that a certified technician perform the service. 24. To reduce the risk of electric shock or fire, do not use extension cords or adapters to connect the unit to an electrical power source. SAVE THESE INSTRUCTIONS HOUEHOLD USE ONLY English 3 Note: Tools and Materials Required You will need to use the following tools when installing your washer: 1. Phillips Screwdriver - For bottom plate 3. Level - To balance washer 1 2 3 4 4. Open End Plyers - To secure ntake hose i ion 2. Tape Measure - Check measurement of washer locat
Page: 4
English SAFETY INSTRUCTIONS Avoid fire hazard or electric shock. Do not use an extension cord or an adapter plug. Do not remove any prong from the power cord. Do not, under any circumstances, cut, remove, or bypass the grounding prong. Grounding type wall receptacle Power supply cord with 3-prong grounding plug Electrical Requirements Grounding Instructions This appliance must be grounded. It is equipped with a 3-wire cord having a grounded plug. The plug must be plugged into an outlet which is properly installed and grounded. Warning! Improper use of the grounded wire can result in the risk of electric shock. Consult a qualified electrician if necessary. Do not attempt to defeat this safety feature by modifying the plug. Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is necessary to use an extension cord: A. Use only 3-wire extension cord with 3-blade grounding plug. B. The marked rating of the extension cord must be equal to or greater than the rating of this appliance. C. It should be positioned such that it does not drape over the counter or tabletop where it can be pulled on children or tripped over. Attempting any maintenance or cleaning: To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the dryer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter). Pressing the Power ON/OFF button to an off position or pressing Start / PAUSE button, does NOT disconnect the appliance from the power supply. Wiring Requirements • This appliance must be plugged into at least a 15 AMP 110-120 VOLT 60 HZ GROUNDED OUTLET. WARNINGS: 4 Note:
Page: 5
PAGE UNPACKING YOUR WASHING MACHINE.................................. 1 IMPORTANT SAFETY INSTRUCTIONS.......................................2-4 UNPACKING AND CHECKING PARTS......................................... 6 WASHER PARTS AND FEATURES................................................. 7 CONTROL PANEL ......................................................................... 8 OPERATING YOUR WASHER.....................................................15 CHOOSING A CYCLE .................................................................18 PROPER CARE AND CLEANING ................................................21 TROUBLESHOOTING GUIDE ......................................................22 WARRANTY................................................................................24 English TABLE OF CONTENTS 5 INSTALLATION INSTRUCTIONS .................................................10
Page: 6
Unpacking 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove the bottom Styrofoam that is used to protect the washer from shipping damage due to vibrations and shock. 2. Inspect and remove any remaining packing, tape or printed materials before using the washer. The bottom panel is located between the top foam used for protection and box. a b c d f Check to make sure that the accessories are present and in good condition. If you find that they are not in good condition or are missing, please contact our customer service department for assistance. Our Toll-Free number is 1-877-337-3639. English UNPACKING AND CHECKING PARTS Parts a) 1 Bottom Panel b) c) 1 Water Inlet Hose d) 1 Drain Hook (Gooseneck) e) 1 Quick Sink Faucet Adapter 6 Note: FRONT FACE TO FLOOR g Optional Caster Wrench Optional 4 Pack h g) Optfional 4 Casters h) Caster wrench 2 Locki 6 Screws for the Bottom Plate ng ands B e Quick Sink Faucet Adapter Silver Faucet Connector f )
Page: 7
2. Control Panel 3. Washer Cabinet 5. Cabinet Handle (located on both sides of the washer) 6. Water Inlet Fitting 7. Rubber Washer 8. 9. Drain Hose 10. Water Inlet Hose Power Cord (120 Volt / 60 Hz) 9 7 8 6 10 WASHER PARTS AND FEATURES Front View Back View English 7 4 5 2 3 1 4. Front Level ng Leg 1. Top Lid i
Page: 8
English CONTROL PANEL Choose washing cycle Normal - Normal Wash Heavy - Huge and heavy garments Quick Wash - Small wash loads that are slightly soiled Indicates cycle chosen with stages of cycle in operation. With Power "ON" Press the "Start/Pause" button to start washing cycle, pause operation, or resume operation. Press in the "Power On/Off" button to turn on the power of the washer. 3 4 Select water height in drum based on laundry being washed. 8 STATUS QUICK WASH NORMAL WASH RINSE SPIN POWER ON/OFF START PAUSE CYCLE HIGH HEAVY WATER LEVEL MEDIUM LOW HLP21N Water Level Button Button Power ON/OFF 3. Start/Pause Button 1. Cycle Button 2. 5 4. . 1 2 5 Status In icator Lights d
Page: 9
y l t c e r i d r o , g n i t t fi t c e n n o c k c i u Q e h t g n i s u , e s o h t e l n i r e t a w e h t t c e n n o C . 3 connect to faucet. . k o o H n i a r D e h t g n i s u k n i s e h t e d i s n i r o n i a r d n i e s o h n i a r d e c a l P . 4 . m u r d e h t f o e d i s e h t n o d e l l a t s n i s i t I . e c a l p n i s i r e t l fi t n i l e h t e r u s e k a M . 5 a o t n i d r o c r e w o p g u l p n e h t , r e h s a w e h t n i s i g n i h t o l c t u b g n i h t o n e r u s n E . 6 15 AMP 110-120 VOLT, 60 HZ GROUNDED OUTLET ONLY. 7. Proceed by pressing the "POWER ON" button. 8. Select water height. e h t s s e r p n e h t , n o t t u b ” E L C Y C “ e h t g n i s u g n i h s a w ” L A M R O N “ t c e l e S . 9 "START" button. Power English 9 NORMAL WASH WATER LEVEL START _ PAUSE L A M R O N R O F S N O I T C U R T S N I P U - T E S K C I U Q WASH . r e h s a w e l b a t r o p t c a p m o c W E N r u o y g n i s u r o f e c a l p t s e b e h t e t a c o L . 1 Make sure it is near a 120 volt outlet and a water source, like a sink, with a drain. FRONT FACE TO FLOOR CYCLE Sink Faucet Quick Sink Faucet Adapter Silver Faucet Connector Washer Water inlet hose Drain hose Rear View of Washer Drain Hook SINK 2. Screw on the bottom plate with the six (6) screws provided.
Page: 10
Unit Dimensions 29-29/32” 17-19/32” 17-1/4” 38-5/8” 17-19/32” 17-1/4” English • Select a suitable location for the washer on a hard, even surface away from direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances, etc.). • Verify the compact washer’s measurement with the location you have selected and make sure the washer will fit. • Make sure you have a grounded 120 volt outlet next to the area of the washer. • Any floor unevenness should be corrected with the leveling leg located on the bottom right corner of the washer. Cold Environments • The washer must be placed and used at room temperatures ONLY. You must not place the washer where the temperature is at or below freezing or outside. • This appliance must be stored at room temperature. Do not install or operate this appliance in an area where room temperature is below freezing. • If you received this appliance when the outside temperature is below freezing, do not operate until this appliance has warmed to room temperature. PROPER LOCATION INSTALLATION INSTRUCTIONS Read carefully and understand all installation instructions before installing this washing machine. If after completing the process you are still unsure whether the washer has been properly installed, we recommend that you contact a qualified installer. WARNING: DO NOT PLUG THE WASHER INTO THE A/C OUTLET until ready for use. Always ensure your appliance is unplugged before installing or changing any parts. 10
Page: 11
English Installing the Bottom Panel The bottom panel blocks noises to provide you with the quietest performance possible during the wash cycle operation. 1. First, lay down the washer on its front side. 2. Place the panel against the bottom of the machine. Align the holes in the panel with the holes in the washer. NOTE: Please ensure that the bottom plate is positioned properly before permanently screwing to bottom of the washer. The side marked "face to floor" must be facing you when putting the screws in. The end marked "front" must be aligned with front of the washing machine. WARNING: Not facing the bottom plate properly or aligning the bottom plate to the front of washer will cause damage to washer! FRONT FRONT FACE TO FLOOR 3. Insert the screws through the holes of the panel into the bottom of the washer and tighten. (6 screws are supplied.) 4. Once all screws have been installed and the panel is in place, return the washer to its standing position. Note: During this time, you may reroute the drain hose to the left or right side for draining. Just remove hose clamp and snake to other side, then re-insert hose to other side. FRONT 11
Page: 12
English Leveling the Washer Warning! An "off-balance" washer will not function properly and can stop. Using a level is best practice. • can be adjusted by turning the center foot counter-clockwise to raise the foot and clockwise to lower the washer. Once the foot is at the right height, then Note: If the washer is inclined more than 2˚, the machine will not operate. Your washer has 4 adjustable levelfing legs that fis located on the front rfight corner. After properly placing your washer in its final location, you must level the washer. lock that pos ng the outer and larger r ng of the xed foot. Loosen the adjustable outer and larger ring of the fixed foot. The leveling leg i it on us i fi i Caster Option (when supplied or purchased) This washer can convert from fixed feet to casters for mobility and portability. The best time to change from fixed feet to casters is when installing the bottom panel. Unscrew and remove the fixed feet. Screw each of the 4 casters to the bottom base by hand first, then use a wrench to secure the caster's locking bolt to the washer body. Leveling leg Higher Lower Leveling leg Locking caster; Lift tab DOWN to lock and UP to unlock 12
Page: 13
English As a second option, you can install directly to a fixed utility hot and cold water outlet by using a “Y Hose” (NOT supplied) . To washer inlet 1. First, remove the aerator from your faucet nozzle and determine the size/type of the faucet. 2. Once you determine the size/type of the faucet (Outside Threaded End or Inside Threaded End), place the proper sized rubber washer into the silver faucet adapter. 3. Attach the silver faucet connector to the faucet. 4. Attach the faucet connector to the water inlet hose and make sure that the rubber washer is placed in between. 5. Attach the other end of the water inlet hose to the washer water inlet and make sure that the rubber washer is placed in between. B Large Inside thread A Outside Thread Note: Incoming hot water must not exceed 122˚F / 50˚C. Installing Your Washer Read the installation instructions carefully and ensure washer location before beginning. Installing Quick Sink Adapter: When installing the quick sink faucet adapter to the faucet, follow the steps below: $ % 13 Attached hose to water inlet
Page: 14
English all water and drain lines are connected . Carefully inspect for any leaks around the machine and at the back. If there is a leak, check if any connections are loose. You may need to tighten any loose connections. Do not remove the water absorption cushion. Check before each use to make sure it is not damaged. CAUTION! If after completing these steps you are still unsure whether unit has been properly installed, contact a qualified installer. We recommend that the washer be installed by a certified technician to ensure that it is properly installed. Final connection of washer to sink should look like this. Note: 6. The drain hose must be placed into a drainpipe or sink at least 1-1/2 inches in diameter. Use the gooseneck drain hook to hold the hose in place. To avoid possible water back-up, the drain hose must reach a height of at least 31-1/2 inches minimum and 40 inches maximum. Drain Hook Drain Hook Laundry tub: Just hang hook over side of sink or for a more permanent use plastic ties. Plastic Tie Plug fin the washer to a regular 120 Volt / 60 Hz, 15 Amps outlet, only after 7. 14 Washer Water inlet hose Drain hose Rear View of Washer SINK
Page: 15
Note: English Power ON/OFF: (1) • Press it again to turn the power OFF. Start/Pause: (2) • again to resume the wash cycle. CYCLE Select: (3) • • Function and Status Indicator Lights: (5) • The function display lights indicate that a selected feature is ON or what the cycle is about to begin. • wash/rinse/spin cycle. The Control Panel STATUS NORMAL OPERATING YOUR WASHER 3 5 2 1 4 STATUS QUICK WASH NORMAL WASH RINSE SPIN POWER ON/OFF START PAUSE CYCLE HIGH HEAVY WATER LEVEL MEDIUM LOW HLP21N POWER ON/OFF START PAUSE CYCLE NORMAL WASH QUICK WASH HEAVY Water Level : (4) the Water Level Press button button wash load. depending on the level settings HIGH WATER LEVEL MEDIUM LOW 15 to select the The default water level may select from low, medium is s Press proper water level and high water “CYCLE Select”button. There are 3 main washing cycles, Normal, Heavy and Quickwash, along with a total of 7 et at "MEDIUM" pos wash operation options. it on. i During the wash cycle, a flashing light indicates the current STATUS of Press the POWER button once to turn ON the power to the washer. once to start the wash process. Press this button once again to pause the activity during the wash cycle. Push it Rapid flashing indicates that the washer is not operating properly. Press the CYCLE select button for Select your desired cycle program by pressing the desired the this setting . You . setting
Page: 16
English Loading the Washer • • Separate the white from the colored clothing. Separate heavy fabrics from light fabrics. • Carefully check all pockets and cuffs for foreign items. They can easily slide into the tub and cause damage to the tub and/or make disturbing noises during cycles. • Always balance the laundry load evenly within the washer tub, so there is no single heavy areas and all the laundry is evenly distributed. the water from entering the washer. Clean this at least once a month. 4. Add the detergent. 5. Add the wash load. 6. Press the Start / Pause button. 7. turning OFF the machine and then restarting to make the new selection. If the washer is turned ON without any water in the tub, it will start to spin after a few minutes. The pulsator will not rotate unless the water is filled to a selected level. Note: Do not use the “HEAVY Wash” program for woolen clothing. Note: Note: Note: There is a filter in the water inlet valve. This prevents foreign particles in Selecting the Water Level • Your selection may depend on your There are 3 pre-set water levels to chose from: Low, Medium and High wash load . 16 1. Steps for the Wash Process 2. Press “Cycle Select”to select wash program. Turn the power ON by pressing the “ON” button. Select the water level. 3. After the starts, you may change the cylcle or program by wash ng mach ne Load each item loosely. i i
Page: 17
Recommended Water Levels(The default water level is MEDIUM) Load Size in lbs. Water Level Approximate Water used in Gallons 3.9 High 7.40 3.44 Medium 5.31 Less than 3.44 Low 3.17 Note: Incoming hot water must not exceed 122˚F/50˚C. English 17
Page: 18
• With POWER ON, Press the “CYCLE Select” button for your desired wash cycle. Choose between 7 various washing cycles options. Each time you press the CYCLE button, you will move throught the washers cycle menu. When you finalize your selection, please press the START button. Program Select Wash Program Application 1. Power ON Normal Wash Cycle Wash, Rinse & Spin 2. Press Once Wash only 3. Press Twice Wash & Rinse only No Spin 4. Press Three Times Rinse & Spin only No Wash 5. Press Four Times Spin only No Wash or Rinse 6. Press Five Times Heavy Wash Cycle 7. Press Six Times Spin CHOOSING A CYCLE English STATUS NORMAL Selecting the Wash Cycle When you first turn on the POWER, the washer will automactically be set for the NORMAL wash cycle, for Wash, Rinse & Spin. The LED indicators with be lit, to show cycle program. Power ON Wash, Rinse & Spin Normal Wash Then press the START button to begin. STATUS QUICK WASH NORMAL WASH RINSE SPIN HEAVY 18 Heavy Wash , No Spin or Rinse , Rinse Spin POWER ON/OFF Rinse, , Quick Wash Cycle Quick Wash
Page: 19
English Note: • The total wash times will vary depending on cycle. • The total time includes the normal water inlet time and drain time. The total washing time may be affected by the water inlet pressure and water level. • • In the “Quick” program select wash, (fast wash, for delicates) rinse and spin are set automatically. No procedure can be selected after setting. Note: When you turn the power OFF, then ON, the machine will reset to the End-of-Cycle Signal The machine will beep at the end of the cycle, indicating that the washing is the cycle. standard NORMAL wash program with wash/rinse/spin appli a c tions. Wash Program Wash Rinse Spin Total Times (approx Minutes (approx (approx minutes) / Times minutes) minutes) NORMAL Wash Wash, Rinse 13–16 6 / 1 35 – 42 & Spin Heavy Wash Soak, Wash, 26 – 27 12 / 2 68 – 82 Rinse & Spin Quick Wash Wash, 5 - 6 5 / 1 21 – 28 Rinse & Spin Approximate Wash Times 19 7 7 5 complete. The “Sp n” nd cator l ghts w ll st ll be ON. The washer The spin time is the time from the intermittent running to the finishing of the cycle. i i i i i i on of i will turn OFF automat cally n approx mately 30 seconds after the complet i i i
Page: 20
English 20 Closing the Top Lid For safety purposes, the top lid must always be closed during the wash process. If you open the top lid while the wash cycle is in progress, you will observe the following: • An alarm will sound. • The tub will not spin while the lid is open. • If the unit is in wash mode, it will stop running. Simply close the top lid and press the start/pause button to resume the cycle. Loading the Washer • Load each item loosely. • Separate the white from the colored clothing. Separate heavy fabrics from light fabrics. • Carefully check all pockets and cuffs for foreign items. They can easily slide into the tub and cause damage to the tub and/or make disturbing noises during cycles. • Pre-treat all stains and heavily soiled areas for best results. • Do not overload your washer. • Close the door or top lid properly after loading the clothes. • When loading wet items, keep water level high enough to keep the unit in balance and to allow clothing to float easily in the water. Proper Use of Detergent • Fill water in the tub at the “Low” water level. • Add the detergent. • Load the washer. • Select the water level. Note: The amount of detergent used depends on the size of the load, the water type (hard or soft) and whether the clothes are heavily soiled or lightly soiled. Besides the performance of the washing machine, the quality of the detergent also affects the wash result. For best results, use low sudsing detergents only. Refer to the detergent manufacturer’s recommended amount for usage. Proper Use of Bleach Refer to the bleach manufacturer’s chart for the recommended use of liquid bleach. Dilute the bleach and add it to the water before putting clothes into the washtub. Warning! Be careful not to spill undiluted bleach onto the washer cabinet or onto clothing. It is a strong chemical that may damage your clothes and the finish of the washer if not properly diluted.
Page: 21
English Warning! Always unplug your appliance before cleaning to avoid electric shock. Ignoring this warning may result in personal injury or death. Before using cleaning products, always read and follow the cleaning product manufacturer’s instructions and warnings to avoid personal injury and product damage. PROPER CARE AND CLEANING General Cleaning and Maintenance Use only a damp or sudsy cloth to clean the control panel. • To avoid any kind of damage to the cabinet finish, wipe the appliance cabinet as needed. If liquid/powdered softener, bleach or detergent is spilled onto the cabinet, wipe the cabinet immediately because it may cause damage to the finish. • Do not use any abrasives, harsh chemicals, ammonia, chlorine bleach, concentrated detergent, solvents or metal scouring pads. Some of these chemicals and materials may dissolve, damage and/or discolor your appliance. • Remove pins and other sharp objects from clothing to prevent scratches on interior parts. • The filter screen of the water inlet valve may become blocked by soil and residue. Please clean it with a brush monthly. Long Absences / Moving • Turn OFF the water supply faucets and disconnect the hoses. Drain water from all hoses. This will prevent damage from water leakage if the hoses are accidentally ruptured or if they become loose. • Disconnect the electrical plug. • Dry the inner washtub. If moving the washer, disconnect the drain hose. • To prevent mold and mildew, leave the door open so that the moisture inside the machine can evaporate. • Reinstall the foam base/Styrofoam at the bottom of the unit to prevent internal parts from becoming damaged due to vibrations and shock when the washer is being moved to another location. 21 Normal Operating Sounds The following sounds are normally heard during the operation of the washer: • Tumbling sounds can be heard as heavy wet clothes in the washer are tossed around continuously. • Air rushing noise is the result of the washtub spinning at a very high RPM. • Clicking sounds are caused by the wash and rinse cycles turning ON and OFF.
Page: 22
English Before calling for service, determine the symptoms and follow the suggested solutions: TROUBLESHOOTING GUIDE Washer does not operate: • Check if the unit is plugged in. The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the fuse needs to be replaced. • Check if the washer is overloaded. Reload and redistribute the clothing to rebalance the machine. • Check if the door is open. You may have to close the door properly. • Check if the program selections are set properly. You may have to adjust the settings. • Check the Power “ON/OFF” button to see if it is in the OFF position. You may need to press the button to set it in the ON position. • Check if the “Start/Pause” button is on “Pause” mode. Press this button to start the wash process. • The wash process is paused. This is normal. The clothing sensor is checking to verify that there are clothes inside the washtub. Water will be added approximately 48 seconds later. • The pulsator pauses during incoming water flow in the wash and rinse cycle. This is normal. This prevents splashing during water inlet. • The washer may need to be reloaded and the clothes may need to be rebalanced. Problems with water: • Not enough water is coming in - The water faucet may need to be fully turned ON. Water hose may be tangled or bent; straighten the hose. Check the water level selection. It may need to be readjusted. This may cause the wash program to pause for a few minutes after water inlet. • Water leaks - This is due to improper installation of the drain hose or fill hose. Your home drain may be clogged. You may need to tighten the hose, check the plumbing or call a plumber. Water may also leak if the machine is overloaded or if too much detergent is used. • Water does not drain - This is due to improper installation of the drain hose. You may need to connect the drain hose properly. Check the position of the drain hose. The drain hose may be clogged or bent. • Water flows out of the drain hose during the first use of the machine - This may be the water left in the tub after the factory inspected the unit to test its performance in order to ensure the best quality. 22
Page: 23
English 23 Problems with clothing: • Clothes are too wrinkled – Clothes have been improperly sorted or the machine has been overloaded. Do not mix heavy clothes such as work clothes with light clothes such as blouses, light shirts and delicate items. • Clothes have soap residue – The detergent may not be dissolving in the water. Check the water temperature or add detergent as the washtub is being filled with water (before you load your clothes) to avoid soap residue on clothes. Liquid detergent is recommended. • Clothes are ripped or have holes - Sharp objects such as pins and belt buckles were left in the washtub. You must remove small, loose, sharp objects. Fasten belts, zippers, metal snaps etc. Check if you are using undiluted bleach. Never add undiluted bleach to the wash. Other: • The spinning is intermittent when it starts – The laundry needs to be balanced to avoid slanting. Move the laundry around to equalize the load. • The “Spin” does not work in Program Select – The program is setting the drain time. Spinning will start in a few minutes. • During the final spinning, it stops, the “Rinse” indicator lights up and the washer starts to fill with water – The wash load is slanting on one side. After the water is filled, the slanting will be removed and the spinning will be reactivated. Washer makes noises: • Washer may need to be reinstalled and leveled. Refer to the washer installation section. • Wash load may need to be rebalanced, as the load may be uneven. • Coins, loose change, buttons or other heavy objects may be making the noise. • A squeaking sound may be due to an overloaded wash tub. • Vibration noises are due to an improper leveling of the washer or an uneven distribution of clothing in the tub.
Page: 24
English 24 Full ONE Year Warranty For 12 months from the date of original retail purchase, Haier will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Limited Warranty After one year from the original retail purchase date, Haier will provide a part at no cost, as indicated below, to replace said part as a result of a defect in materials or workmanship. Haier is solely responsible for the cost of the part. All other costs such as labor, trip charge, etc are the responsibility of the owner. Second through Fifth Year Haier will provide the outer washtub and related outer tub assembly parts should the part fail to hold water. Second through Seventh Year Haier will provide the inner stainless steel wash tub if defective in material or workmanship. Note: This warranty commences on the date the item was purchased and the original purchase receipt must be presented to the authorized service representative before warranty repairs are rendered. Exceptions: Commercial or Rental Use Warranty 90 days labor from date of original purchase 90 days parts from date of original purchase No other warranty applies For Warranty Service Contact your nearest authorized service center. All service must be performed by a Haier authorized service center. For the name and telephone number of the nearest authorized service center please call 1-877-337-3639. Before calling please have available the following information: Model number and serial number of your appliance. The name and address of the dealer you purchased the unit from and the date of purchase. A clear description of the problem. A proof of purchase (sales receipt). This warranty covers appliances within the continental United States, Puerto Rico and Canada. What is not covered by this warranty: Replacement or repair of household fuses, circuit breakers, wiring or plumbing. A product whose original serial number has been removed or altered. Any service charges not specifically identified as normal such as normal service area or hours. Damage to clothing. Damage incurred in shipping. Damage caused by improper installation or maintenance. Damage from misuse, abuse accident, fire, flood, or acts of nature. Damage from service other than an authorized Haier dealer or service center. Damage from incorrect electrical current, voltage or supply. Damage resulting from any product modification, alteration or adjustment not authorized by Haier. Adjustment of consumer operated controls as identified in the owner’s manual. Labor, service transportation, and shipping charges for the removal and replacement of defective parts beyond the initial 12-month period. Damage from other than normal household use. Any transportation and shipping charges. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or consequential damages, so the above limitations may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary, from state to state. Haier America New York, NY 10018 LIMITED WARRANTY and all attachments, Hoses accessories and In -Home Service is available at the discretion of Haier America.
Page: 25
English 25 Welcome to the world of Haier Compact Portable Laundry! The HLP140 is a Vented Dryer that mounts over any of Haier’s family of Compact Portable washers. • Efficient, Compact and Portable • Easy Installation and Use • Uses Convenient Standard 120VAC -15 amp Outlets • You can install them anywhere! The perfect Compact Dryer for your Compact washer. DRYER Compact 120Volt Vented Dryer Model: HLP140 2.6 Cu. ft. Portable Vented Tumble Dryer • 1100 Watt Efficient Vented Tumble Dryer • Uses Convenient Standard 120VAC -15 amp Outlet • Digital Easy Touch Control • 4 Dry Cycle Settings / 3 Temperature Settings • End-of-Cycle Signal • Dry Times: 30, 60, 90, 120, and 150 minutes • Wall-Mountable Above Any Washer • Plugs into Any Household Outlet Uses Standard 120 volt - 15 Amp Outlets No Special Wiring Unit Dimensions (WxDxH): 24.8" x 16.73" x 26.97" Dryer NOT included;available through your retailer
Page: 26
5 Español PAGE DESEMBALAJE DE SU LAVADORA .............................................. 1 INSTRUCCIONES DE SEGURIDAD IMPORTANTES....................2-4 DESEMBALAJE Y CONTROL DE LAS PIEZAS ............................... 6 PIEZAS Y FUNCIONES ................................................................ 7 PANEL DE CONTROL .................................................................. 8 INSTRUCCIONES DE INSTALACIÓN ..........................................10 FUNCIONAMIENTO DE SU LAVADORA....................................15 ELECCIÓN DE UN CICLO ............................................................18 CUIDADO Y LIMPIEZA ADECUADOS.........................................21 GUÍA PARA LA DETECCIÓN Y SOLUCIÓN DE PROBLEMAS.....23 GARANTÍA .................................................................................26 CONTENIDOS
Page: 27
115 V, 60 Hz Made in China Fabriqué en Chine Hecho en China Haier America New York, NY 10018 Printed in China HLP021-WM 100421 1207 IMPORTANT Do Not Return This Product To The Store If you have a problem with this product, please contact the “Haier Customer Satisfaction Center” at 1-877-337-3639. DATED PROOF OF PURCHASE, MODEL # AND SERIAL # REQUIRED FOR WARRANTY SERVICE IMPORTANT Ne pas renvoyer cet appareil au magasin. Si vous avez un problème avec cet appareil, veuillez contacter le service à la clientèle de Haier au 1-877-337-3639. IL EST OBLIGATOIRE DE FOURNIR UNE PREUVE D’ACHAT DATÉE, LE NUMÉRO DU MODÈLE ET SON NUMÉRO DE SÉRIE AFIN DE BÉNÉFICIER DE LA COUVERTURE DE LA GARANTIE. IMPORTANTE No Devuelva Este Producto al Establecimiento Compra. Si tiene problemas con este producto, por favor póngase en contacto con el “Centro Haier de Atención al Cliente” en el 1-877-337-3639. PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE MODELO Y No. DE SERIE Part # WD-9999-14
Brand:
Haier
Product:
Washing Machines
Model/name:
HLP21N
Filetype:
PDF
Available languages:
English, French, Spanish