Fujifilm XF55-200mmF3.5-4.8 R LM OIS manual

View a manual of the Fujifilm XF55-200mmF3.5-4.8 R LM OIS below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Fujifilm
  • Product: Lens
  • Model/name: XF55-200mmF3.5-4.8 R LM OIS
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Polish, Russian, Norwegian, Finnish, Chinese

Table of Contents

Page: 8
For Your Safety
Be sure to read these notes
before use
Safety Notes
Thank you for your purchase of this prod-
uct. For repair, inspection, and internal
testing, contact your FUJIFILM dealer.
• Make sure that you use the lens correctly.
Read these safety notes and the camera
Owner’s Manual carefully before use.
• After reading these safety notes, store
them in a safe place.
About the Icons
The icons shown below are used in this
document to indicate the severity of the
injury or damage that can result if the in-
formation indicated by the icon is ignored
and the product is used incorrectly as a
This icon indicates that
death or serious injury can
result if the information is
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indi-
cate the nature of the instructions which
are to be observed.
Triangular icons tell you that this
information requires attention (“Im-
Circular icons with a diagonal bar
tell you that the action indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation
mark indicate an action that must
be performed (“Required”).
Do not immerse in or expose to
water. Failure to observe this
precaution can cause a fire or
electric shock.
the case). Failure to observe
this precaution can cause fire,
electric shock, or injury due to
product malfunction.
Should the case break open as
the result of a fall or other ac-
parts. Failure to observe this
precaution could result in
electric shock or in injury from
touching the damaged parts.
Remove the camera battery
immediately, taking care to
avoid injury or electric shock,
and take the product to the
point of purchase for consul-
Page: 9
Do not place on unstable sur-
faces. The product may fall,
causing injury.
Do not view the sun through
the lens or camera viewfinders.
Failure to observe this precau-
tion can cause permanent
visual impairment.
Do not use or store in locations
that are exposed to steam, or
smoke or are very humid or
extremely dusty. Failure to
observe this precaution can
cause fire or electric shock.
Do not leave in direct sunlight
or in locations subject to very
high temperatures, such as in
a closed vehicle on a sunny day.
Failure to observe this precau-
tion can cause fire.
Keep out of the reach of small
children. This product could
cause injury in the hands of
a child.
Do not handle with wet hands.
Failure to observe this precau-
tion can cause electric shock.
Keep the sun out of the frame
when shooting backlit subjects.
Sunlight focused into the
camera when the sun is in or
close to the frame can cause
fire or burns.
When the product is not in use,
replace the lens caps and store
out of direct sunlight. Sunlight
focused by the lens can cause
fire or burns.
Do not carry the camera or lens
while they are attached to a
tripod. The product can fall
or strike other objects, caus-
ing injury.
TestedTo ComplyWith FCC Standards
FCC Statement: This device complies with Part 15 of
the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause
harmful interference, and (2) this device must ac-
cept any interference received, including interfer-
ence that may cause undesired operation.
CAUTION: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential in-
stallation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between
the equipment and receiver.
Page: 10
• Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV
technician for help.
• You are cautioned that any changes or modifi-
cations not expressly approved in this manual
could void the user’s authority to operate the
Notes on the Grant: To comply with Part 15 of the
FCC Rules, this product must be used with a
Fujifilm-specified ferrite-core A/V cable, USB cable,
and DC supply cord.
CAUTION: This Class B digital apparatus complies
with Canadian ICES-003.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water (excluding
waterproof products).
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as ra-
diators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
• Only use attachments/accessories specified by
the manufacturer.
• Unplug this apparatus during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service personal.
Servicing is required when the apparatus has
been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the ap-
paratus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
In the European Union, Norway, Iceland
and Liechtenstein: This symbol on the
product, or in the manual and in the
warranty, and/or on its packaging in-
dicates that this product shall not be
treated as household waste. Instead
it should be taken to an applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative conse-
quences to the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product.
The recycling of materials will help to conserve nat-
ural resources. For more detailed information about
recycling this product, please contact your local city
office, your household waste disposal service or the
shop where you purchased the product.
In Countries Outside the European Union, Norway,
Iceland and Liechtenstein: If you wish to discard this
product, including the batteries or accumulators,
please contact your local authorities and ask for the
correct way of disposal.
Page: 11
Before Using This Product
Some lens features are not available with older
versions of the camera firmware. Be sure to up-
date the camera firmware to the latest version.
Instructions on viewing the camera firmware
version and updating camera firmware are
available from the following website:
If you do not have access to a computer, sup-
port is available from the local distributor
listed in the “FUJIFILM Worldwide Network”
material provided with your camera.
Product Care
• When using a lens hood, do not pick up or
hold the camera using only the hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from
the lens surfaces. To remove smudges and
fingerprints, apply a small amount of ethanol
or lens cleaner to a soft, clean cotton cloth or
lens-cleaning tissue and clean from the cen-
ter outwards using a circular motion, taking
care not to leave smears or touch the glass
with your fingers.
• Never use organic solvents such as paint
thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens
is not in use.
• If the lens will not be used for an extended pe-
riod, store it in a cool, dry location to prevent
mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal
mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations
could cause damage or warping.
Page: 12
Parts of the Lens
XF18–55mmF2.8–4 R LM OIS XF55–200mmF3.5–4.8 R LM OIS
q Lens hood
w Mounting marks
e Focus ring
r Zoom ring
t Aperture ring
y O.I.S. switch
u Aperture mode switch
i Lens signal contacts
o Front lens cap
!0 Rear lens cap
Supplied Accessories
• Front lens cap
• Rear lens cap
• Lens hood
• Cloth wrapping
Page: 13
Attaching the Lens
See the camera manual for information
on attaching and removing lenses. Note
that this product is not compatible with X
mount film cameras.
Removing the Caps
Remove the caps as shown.
Attaching the Hood
When attached, lens hoods reduce glare
and protect the front lens element.
Page: 14
Rotate the zoom ring left to zoom out, re-
ducing magnification and increasing the
area visible in the frame. Rotate the ring
right to zoom in, increasing magnification
so that the subject occupies more of the
Zoom out Zoom in
Optical Image Stabilization (OIS)
To use optical image stabili-
zation, slide the O.I.S. switch
to ON.
For auto aperture control, slide
the aperture mode switch to A.
To adjust aperture manually, slide the
switch to Z and rotate the aperture ring.
Rotate the ring left for wider apertures
(lower f-numbers), right for smaller aper-
tures (higher f-numbers).
Wider apertures Smaller apertures
Page: 15
Type XF18–55mmF2.8–4 R LM OIS XF55–200mmF3.5–4.8 R LM OIS
Lens construction 14 elements in 10 groups (includes 3
aspherical elements)
14 elements in 10 groups (includes 1
Focal length (35 mm format equivalent) f=18 mm–55 mm (27 mm–84 mm) f=55 mm–200 mm (84 mm–305 mm)
Angle of view 76.5°–29° 29°–8.1°
Aperture W:f/2.8–f/22 T :f/4.0–f/22 W:f/3.5–f/22 T :f/4.8–f/22
Aperture control
Number of blades 7 (rounded diaphragm opening) 7 (rounded diaphragm opening)
Stop size ⁄ EV (19 stops) ⁄ EV (17 stops)
Focus range Approx. 0.6m–infinity
• Macro: approx. 0.3m–10m (W);
approx. 0.4m–10m (T)
Approx. 1.1m–infinity
• Macro: approx. 1.1m–3.0m
Max. magnification W:0.08× T :0.15× W:0.06× T :0.18×
External dimensions W:⌀65.0 × 70.9 mm
T :⌀65.0 × 97.9 mm
W:⌀75.0 × 118 mm
T :⌀75.0 × 177 mm
Weight (excluding caps and hoods) Approximately 310 g Approximately 580 g
Filter size ⌀58 mm ⌀62 mm
Q Improvements may result in unannounced changes to specifications and appearance.

Question & answers

There are no questions about the Fujifilm XF55-200mmF3.5-4.8 R LM OIS yet.

Ask a question about the Fujifilm XF55-200mmF3.5-4.8 R LM OIS

Have a question about the Fujifilm XF55-200mmF3.5-4.8 R LM OIS but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Fujifilm XF55-200mmF3.5-4.8 R LM OIS. Please make sure that you describe your difficulty with the Fujifilm XF55-200mmF3.5-4.8 R LM OIS as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.