Dyson Cu-Beam Duo manual

Select a language NL 100%

View a manual of the Dyson Cu-Beam Duo below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dyson
  • Product: Not categorized
  • Model/name: Cu-Beam Duo
  • Filetype: PDF
  • Available languages: , , , , ,

Table of Contents

Page: 1
CONTENTS
UK/ROI4
AU/NZ6
BR8
CA10
CAFR13
CN16
CZ18
DE/AT/CH/LU20
DK24
ES26
FI28
FR/BE/CH/LU30
HR34
IL37
IS38
IT/CH40
JP44
KR46
MY48
NL50
NO52
PT54
RU56
SA/UAE61
SE62
TR64
TW/HK/MO66
USEN68
USES/AR/CL/GT/MX/PA71
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 2
3
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 3
4
UK/ROI
IMPORTANT SAFETY INSTRUCTIONS
BEFORE INSTALLING OR USING THIS FIXTURE READ ALL
INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS
MANUAL AND THE INSTALLATION NOTES
WARNING
Risk of electric shock! If casing is removed or handled improperly
the internal components of the fixture may cause harm or become
permanently damaged. Do not expose the internal mechanisms/
components of this fixture to moisture.
1. All electrical installation and repair work should be carried out by a
qualified electrician or Dyson Field Service Engineer in accordance with
current local codes or regulations.
2. Do not connect any DALI/1-10V/0-10V/PWM terminals to mains power.
DALI wires are NOT SELV and should never be considered safe to
touch. Basic level of isolation or better is required between DALI wires
and mains cabling.
3. When connecting to the lighting control system and 1-10V/0-10V/PWM
terminals, use double/reinforced insulated wires.
4. Consult local and national accessibility codes and regulations for
relevant installation guidelines. This fixture should be installed with
appropriate fixings for the installation environment. Conformity and
compliance is the responsibility of the installer.
5. If any part of the fixture is not working as it should, has received a sharp
blow, has been dropped, damaged, left outdoors, or been in contact
with water, do not use and contact the Dyson Helpline.
6. CAUTION: Possibly hazardous optical radiation emitted from this
fixture. Do not stare at the light source. May be harmful to the eye.
The fixture should be positioned so that prolonged staring into the light
source at a distance closer than 0.6m is not expected.
7. Do not install or use with a damaged suspension cable. If the
suspension cable supplied is damaged it must be replaced by Dyson, its
service agent or similarly qualified person in order to avoid a hazard.
8. This fixture is compatible with DALI/1-10V/0-10V/PWM compliant
control systems.
9. Use a dry, lint free cloth or compressed air (solvent and moisture free) to
clean the fixture. Ensure the fixture is switched off before cleaning.
10. Ensure no pipe work (gas, water, air) or electrical cables, wires or
ductwork are located directly behind the drilling/mounting area.
11. Check that the electrical supply corresponds to that shown on the rating
plate. If the fixture is connected to any electrical supply other than that
stated on the rating plate permanent damage or improper/unsafe
operation of the fixture may result.
12. The fixture must be earthed.
13. The fixture is designed for dry, internal location only. Operating
environment range 0°C (32°F) to 40°C (104°F) and 10-95% RH
non-condensing.
READ AND SAVE
THESE INSTRUCTIONS
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 4
5
UK/ROI
THANK YOU FOR CHOOSING TO BUY A DYSON LIGHT
DYSON CUSTOMER CARE
Your fixture is covered for 5 years from the date of purchase, subject to the terms of the limited guarantee.
Register your guarantee now at: www.dyson.com
If you have any questions about your fixture, call the Dyson Helpline with your serial number and details of where and
when you bought the fixture.
Note your serial number here for future reference.
Your serial number can be found on the on the registration sheet in the box, and also on the large information sticker
which can be found inside the driver box when the fixture is unpacked.
This illustration is for example purposes only.
A comprehensive installation guide is enclosed with the fixture's packaging. This contains detailed information on
the correct installation of the fixture, which MUST be adhered to completely, including routing of electrical cables.
Damage caused by incorrect installation is not covered by your guarantee.
The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in
incorrect operation, damage to property and/or personal injury. Dyson will not be held liable for any damage to property
or personal injury, or any loss of business or revenue, if you, your staff, your installer or service engineers have not
followed the instructions given in this manual and the installation guide.
YOUR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 5 YEAR GUARANTEE
If you have registered your fixture online, your guarantee will start from the date of purchase. Please retain your proof
of purchase. If you do not have your proof of purchase, your guarantee will start 90 days after the date of manufacture,
according to Dyson’s records.
Where this fixture is sold within the EU, this guarantee will only be valid (i) if the fixture is installed and used in the
country in which it was sold or (ii), if the fixture is installed and used in Austria, Belgium, France, Germany, Ireland, Italy,
Netherlands, Spain or the United Kingdom and the same model as this fixture is sold at the same voltage rating in the
relevant country. Where this fixture is sold outside of the EU, this guarantee will only be valid if the fixture is installed and
used in the country in which it was sold.
WHAT IS COVERED
5 YEAR GUARANTEE
All factory parts of your fixture are guaranteed against original defects, material and workmanship when used in
accordance with the owner’s manual and installation guide for a period of 5 years from the start of your guarantee.
• Any parts which are returned and replaced by Dyson will become the property of Dyson.
• The replacement of any part of your fixture under guarantee will not extend the period of guarantee.
• The guarantee provides benefits which are additional to and do not affect any statutory rights you may have
as a consumer.
WHAT IS NOT COVERED
Dyson does not guarantee the repair or replacement of a fixture as a result of:
• Accidental damage, faults caused by negligent use or care, unintentional or deliberate misuse, neglect, vandalism,
careless operation or handling of the fixture which is not in accordance with the Dyson operating manual.
• Use of parts not assembled or installed in accordance with the instructions of Dyson.
• Use of parts and accessories which are not genuine Dyson components.
• Faulty installation, or installation that does not precisely follow the installation instructions supplied by Dyson
(except where installed by Dyson).
• Repairs or alterations carried out other than in accordance with instructions by Dyson.
• Damage from external sources such as transit, weather, electrical outages or power surges.
• Normal wear and tear (e.g. fuse, etc.).
• Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
• Any electrical, flooding or structural damage, or any loss of business or revenue as a result of product failure. If you are
in any doubt as to what is covered by your guarantee, please contact Dyson (details on the back cover).
SUMMARY OF COVER
• You must provide proof of (both the original and any subsequent) delivery/purchase before any work can be carried
out on your Dyson fixture or before any replacement parts will be supplied. Without this proof, any work carried out or
parts supplied will be chargeable. Keep your receipt or delivery note.
IMPORTANT DATA PROTECTION INFORMATION
When registering your Dyson Fixture:
• You will need to provide us with basic contact information to register your fixture and enable us to support
your guarantee.
• When you register, you will have the opportunity to choose whether you would like to receive communications from
us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest
innovations. We never sell your information to third parties and only use information that you share with us as defined
by our privacy policies which are available on our website: privacy.dyson.com.
IMPORTANT INFORMATION
• The light source of this fixture is not replaceable; when the light source reaches its end of life the whole fixture shall
be replaced.
• If your fixture needs servicing, please call the Dyson Helpline. Also visit the website at www.dyson.com
Important note for Cu-Beam Duo product only:
• When connecting a DALI control system, only the function of dimming is possible. To adjust the upwards and
downwards light distribution, this must be done by manually adjusting the dial on the luminaire. See Installation guide
for further details.
Alternatively, there is the option when using a DALI system to install an individual DALI to analogue converter
(0-10 / 1-10 / PWM) on both the dimming and light distribution inputs. Please ensure the correct setting is selected on the
driver. See installation guide for further details.
• For 0-10/1-10/PWM systems, both dimming and upwards/downwards light distribution are controllable through the
control system.
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 5
6
AU/NZ
IMPORTANT SAFETY INSTRUCTIONS
WHEN INSTALLING OR USING AN ELECTRICAL APPLIANCE
BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
WARNING
Risk of electric shock! If casing is removed or handled improperly
the internal components of the fixture may cause harm or become
permanently damaged. Do not expose the internal mechanisms/
components of this fixture to moisture.
WARNING
FELV terminals marked “Risk of electric shock” are not safe to touch.
WARNING
Circuits connected to any FELV control terminal shall be insulated for
the LV supply voltage of the controlgear and any terminals connected
to the FELV circuit shall be protected against accidental contact.
1. All electrical installation and repair work should be carried out
by a qualified electrician in accordance with current local codes
or regulations.
2. Do not connect any DALI/1-10V/0-10V/PWM terminals to mains power.
DALI wires are NOT SELV and should never be considered safe to
touch. Basic level of isolation or better is required between DALI wires
and mains cabling.
3. When connecting to the lighting control system and 1-10V/0-10V/PWM
terminals, use double/reinforced insulated wires
4. Consult local and national accessibility codes and regulations for
relevant installation guidelines. This fixture should be installed with
appropriate fixings for the installation environment. Conformity and
compliance is the responsibility of the installer.
5. If any part of the fixture is not working as it should, has received a sharp
blow, has been dropped, damaged, left outdoors, or been in contact
with water, do not use and contact the Dyson Helpline.
6. CAUTION: Possibly hazardous optical radiation emitted from this
fixture. Do not stare at the light source. May be harmful to the eye.
The fixture should be positioned so that prolonged staring into the light
source at a distance closer than 0.6m is not expected.
7. Do not install or use with a damaged suspension cable. If the
suspension cable supplied is damaged it must be replaced by Dyson, its
service agent or similiarly qualified person in order to avoid a hazard.
8. This fixture is compatible with DALI/1-10V/0-10V/PWM compliant
control systems.
9. Use a dry, lint free cloth or compressed air (solvent and moisture free) to
clean the fixture. Ensure the fixture is switched off before cleaning.
10. Ensure no pipe work (gas, water, air) or electrical cables, wires or
ductwork are located directly behind the drilling/mounting area.
11. Check that the electrical supply corresponds to that shown on the rating
plate. If the fixture is connected to any electrical supply other than that
stated on the rating plate permanent damage or improper/unsafe
operation of the fixture may result.
12. The fixture must be earthed.
13. The fixture is designed for dry, internal location only. Operating
environment range 0°C (32°F) to 40°C (104°F) and 10-95% RH
non-condensing.
14. RISK OF FIRE - Required clearance from structural members and fire
elements: SCB = 0mm HCB = 0mm
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 6
7
AU/NZ
THANK YOU FOR CHOOSING TO BUY A DYSON LIGHT
DYSON CUSTOMER CARE
Your fixture is covered for 5 years from the date of purchase, subject to the terms of the limited guarantee.
Register your guarantee now at: www.dyson.com.au
If you have any questions about your fixture, call the Dyson Helpline with your serial number and details of where and
when you bought the fixture.
Note your serial number here for future reference.
Your serial number can be found on the on the registration sheet in the box, and also on the large information sticker
which can be found inside the driver box when the fixture is unpacked.
This illustration is for example purposes only.
A comprehensive installation guide is enclosed with the fixture's packaging. This contains detailed information on
the correct installation of the fixture, which MUST be adhered to completely, including routing of electrical cables.
Damage caused by incorrect installation is not covered by your guarantee.
The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in
incorrect operation, damage to property and/or personal injury. Dyson will not be held liable for any damage to property
or personal injury, or any loss of business or revenue, if you, your staff, your installer or service engineers have not
followed the instructions given in this manual and the installation guide.
YOUR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 5 YEAR GUARANTEE.
If you have registered your fixture online, your guarantee will start from the date of purchase. Please retain your proof
of purchase. If you do not have your proof of purchase, your guarantee will start 90 days after the date of manufacture,
according to Dyson’s records.
This guarantee will only be valid if the unit is installed and used in the country in which it was sold.
WHAT IS COVERED
5 YEAR GUARANTEE
All factory parts of your light are guaranteed against original defects, material and workmanship when used in
accordance with the owner’s manual and installation guide for a period of 5 years from the start of your guarantee.
• Any parts which are returned and replaced by Dyson will become the property of Dyson.
• The replacement of any part of your unit under guarantee will not extend the period of guarantee.
The guarantee provides benefits which are additional to and do not affect any statutory rights you may have as a
consumer, including under the Australian Consumer Law.
WHAT IS NOT COVERED
Dyson does not guarantee the repair or replacement of a product as a result of:
• Accidental damage, faults caused by negligent use or care, unintentional or deliberate misuse, neglect, vandalism,
careless operation or handling of the unit which is not in accordance with the Dyson operating manual.
• Use of parts not assembled or installed in accordance with the instructions of Dyson.
• Use of parts and accessories which are not genuine Dyson components.
• Faulty installation, or installation that does not precisely follow the installation instructions supplied by Dyson
(except where installed by Dyson).
• Repairs or alterations carried out other than in accordance with instructions by Dyson.
• Damage from external sources such as transit, weather, electrical outages or power surges.
• Normal wear and tear (e.g. fuse, etc.).
• Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
• Any electrical, flooding or structural damage, or any loss of business or revenue as a result of product failure. If you are
in any doubt as to what is covered by your guarantee, please contact Dyson (details on the back cover).
SUMMARY OF COVER
• You must provide proof of (both the original and any subsequent) delivery/purchase before any work can be carried out
on your Dyson appliance or before any replacement parts will be supplied. Without this proof, any work carried out or
parts supplied will be chargeable. Keep your receipt or delivery note.
IMPORTANT DATA PROTECTION INFORMATION
When registering your dyson fixture:
• You will need to provide us with basic contact information to register your fixture and enable us to support
your guarantee.
• When you register, you will have the opportunity to choose whether you would like to receive communications from
us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest
innovations. We never sell your information to third parties and only use information that you share with us as defined
by our privacy policies which are available on our website: privacy.dyson.com.
IMPORTANT INFORMATION
• The light source of this fixture is not replaceable; when the light source reaches its end of life the whole fixture shall
be replaced.
• If your fixture needs servicing, please call the Dyson Helpline. Also visit the website at www.dyson.com
Important note for Cu-Beam Duo product only:
• When connecting a DALI control system, only the function of dimming is possible. To adjust the upwards and
downwards light distribution, this must be done by manually adjusting the dial on the luminaire. See Installation guide
for further details.
Alternatively, there is the option when using a DALI system to install an individual DALI to analogue converter
(0-10 / 1-10 / PWM) on both the dimming and light distribution inputs. Please ensure the correct setting is selected on the
driver. See installation guide for further details.
• For 0-10/1-10/PWM systems, both dimming and upwards/downwards light distribution are controllable through the
control system.
READ AND SAVE
THESE INSTRUCTIONS
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 9
10
CA
IMPORTANT SAFETY INSTRUCTIONS
WHEN INSTALLING OR USING AN ELECTRICAL APPLIANCE
BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
WARNING
Risk of electric shock! If casing is removed or handled improperly
the internal components of the fixture may cause harm or become
permanently damaged. Do not expose the internal mechanisms/
components of this fixture to moisture.
1. All electrical installation and repair work should be carried out
by a qualified electrician in accordance with current local codes
or regulations.
2. To prevent movement and strain on the terminals, positive means of
field wiring securement must be provided during installation. The field
wiring shall be secured less than 8 cm from the cord entry and
considered with National Electrical code.
3. Do not connect any DALI/1-10V/0-10V/PWM terminals to mains power.
DALI wires are NOT SELV and should never be considered safe to
touch. Basic level of isolation or better is required between DALI wires
and mains cabling.
4. Consult local and national accessibility codes and regulations for
relevant installation guidelines. This fixture should be installed with
appropriate fixings for the installation environment. Conformity and
compliance is the responsibility of the installer.
5. If any part of the fixture is not working as it should, has received a sharp
blow, has been dropped, damaged, left outdoors, or been in contact
with water, do not use and contact the Dyson Helpline.
6. CAUTION: Possibly hazardous optical radiation emitted from this
fixture. Do not stare at the light source. May be harmful to the eye.
The fixture should be positioned so that prolonged staring into the light
source at a distance closer than 0.6m is not expected.
7. Do not install or use with a damaged suspension cable. If the
suspension cable supplied is damaged it must be replaced by Dyson, its
service agent or similiarly qualified person in order to avoid a hazard.
8. This fixture is compatible with DALI/1-10V/0-10V/PWM compliant
control systems.
9. Use a dry, lint free cloth or compressed air (solvent and moisture free) to
clean the fixture. Ensure the fixture is switched off before cleaning.
10. Ensure no pipe work (gas, water, air) or electrical cables, wires or
ductwork are located directly behind the drilling/mounting area.
11. Check that the electrical supply corresponds to that shown on the rating
plate. If the fixture is connected to any electrical supply other than that
stated on the rating plate permanent damage or improper/unsafe
operation of the fixture may result.
12. The fixture must be earthed.
13. The fixture is designed for dry, internal location only. Operating
environment range 0°C (32°F) to 40°C (104°F) and 10-95% RH
non-condensing.
READ AND SAVE
THESE INSTRUCTIONS
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 10
11
CA
THANK YOU FOR CHOOSING TO BUY A DYSON LIGHT
DYSON CUSTOMER CARE
Your fixture is covered for 5 years from the date of purchase, subject to the terms of the limited warranty.
Register your warranty now at: www.dysoncanada.ca
If you have any questions about your fixture, call the Dyson Helpline with your serial number and details of where and
when you bought the fixture.
Note your serial number here for future reference.
Your serial number can be found on the on the registration sheet in the box, and also on the large information sticker
which can be found inside the driver box when the fixture is unpacked.
This illustration is for example purposes only.
A comprehensive installation guide is enclosed with the fixture's packaging. This contains detailed information on
the correct installation of the fixture, which MUST be adhered to completely, including routing of electrical cables.
Damage caused by incorrect installation is not covered by your guarantee.
The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in
incorrect operation, damage to property and/or personal injury. Dyson Canada will not be held liable for any damage to
property or personal injury, or any loss of business or revenue, if you, your staff, your installer or service engineers have
not followed the instructions given in this manual and the installation guide.
YOUR WARRANTY
TERMS AND CONDITIONS OF THE DYSON 5 YEAR LIMITED WARRANTY.
If you have registered your fixture online, your warranty will start from the date of purchase. Please retain your proof
of purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture,
according to Dyson’s records.
This warranty will be void if the fixture is installed and used in a country outside the one in which it was sold.
WHAT IS COVERED
5 YEAR LIMITED WARRANTY
All factory parts of your light are warrantied against original defects, material and workmanship when used in
accordance with the owner’s manual and installation guide for a period of 5 years from the start of your warranty.
• Any parts which are returned and replaced by Dyson will become the property of Dyson.
• The replacement of any part of your unit under warranty will not extend the period of warranty.
• This warranty provides benefits which are additional to and do not affect any statutory rights you may have
as a consumer.
WHAT IS NOT COVERED
Dyson does not warranty the repair or replacement of a product as a result of:
• Accidental damage, faults caused by negligent use or care, unintentional or deliberate misuse, neglect, vandalism,
careless operation or handling of the unit which is not in accordance with the Dyson operating manual.
• Use of parts not assembled or installed in accordance with the instructions of Dyson.
• Use of parts and accessories which are not genuine Dyson components.
• Faulty installation, or installation that does not precisely follow the installation instructions supplied by Dyson
(except where installed by Dyson).
• Repairs or alterations carried out other than in accordance with instructions by Dyson.
• Damage from external sources such as transit, weather, electrical outages or power surges.
• Normal wear and tear (e.g. fuse, etc.).
• Damage caused by cleaning which is not in line with the instructions in this manual. Do not use chemicals to clean
the fixture.
• Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
• Any electrical, flooding or structural damage, or any loss of business or revenue as a result of product failure. If you are
in any doubt as to what is covered by your warranty, please contact Dyson (details on the back cover).
WARRANTY LIMITATIONS AND EXCLUSIONS
• Any implied warranties relating to your appliance including but not limited to warranty of merchantability or warranty
of fitness for a particular purpose, are limited to the duration of this warranty. This limitation is not allowed by some
Provinces and/or Territories and so this limitation may not apply to you.
• Your remedy for breach of this warranty is limited to the warranty service described above.
• Dyson Canada Limited will not be liable for any consequential damages or incidental damages you may incur in
connection with the purchase and use of your appliance.
MANDATORY INSTALLATION
REQUIREMENTS FOR THE US &
CANADA
TO ENSURE THAT THE INSTALLATION OF THE FIXTURE COMPLIES
WITH UL REGULATIONS, THIS ADDITIONAL INSTALLATION
INFORMATION MUST BE FOLLOWED:
1. For Recess Mounting - The driver box must be installed within a metal
enclosure with has conduit access above the ceiling. This must be
obtained and fitted before installation of the fixture.
2. For Surface Mounting - An additional junction box adapter must be
used to connect the driver box to the junction box. Please contact the
Dyson Helpline to obtain this part
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 11
12
• This limited warranty gives you specific legal rights. You may also have other rights which vary by Province and/
or Territory.
• This limited warranty is not transferable.
• This limited warranty is only available in Canada.
WARRANTY SERVICE
• Please fill out and return the Warranty Form, or register online at www.dysoncanada.ca
• Before service can take place, the terms of the warranty require that you contact the Dyson Helpline with your model
name/number, serial number, date and place of purchase.
• Please keep your purchase receipt in a safe place to ensure you have this information.
• All work will be coordinated by Dyson Canada Limited or its authorized agents.
• Any replaced defective parts will become property of Dyson.
• Service under this warranty will not extend the period of this warranty.
• If your appliance is not functioning properly, please call the Dyson Helpline at 1-877-397-6622. Most issues can be
rectified over the telephone by our trained Dyson Helpline staff.
IMPORTANT DATA PROTECTION INFORMATION
When registering your Dyson product:
• You will need to provide us with basic contact information to register your product and enable us to support
your warranty.
• When you register, you will have the opportunity to choose whether you would like to receive communications from
us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest
innovations. We never sell your information to third parties and only use information that you share with us as defined
by our privacy policies which are available on our website: privacy.dyson.com.
DISPOSAL INFORMATION
Dyson products are made from high grade recyclable materials. Recycle where possible.
IMPORTANT INFORMATION
• The light source of this fixture is not replaceable; when the light source reaches its end of life the whole fixture will need
to be replaced at the customer's expense.
• If your fixture needs servicing, please call the Dyson Helpline. Also visit the website at www.dysoncanada.ca
Important note for Cu-Beam Duo product only:
• When connecting a DALI control system, only the function of dimming is possible. To adjust the upwards and
downwards light distribution, this must be done by manually adjusting the dial on the luminaire. See Installation guide
for further details.
Alternatively, there is the option when using a DALI system to install an individual DALI to analogue converter
(0-10 / 1-10 / PWM) on both the dimming and light distribution inputs. Please ensure the correct setting is selected on the
driver. See installation guide for further details.
• For 0-10/1-10/PWM systems, both dimming and upwards/downwards light distribution are controllable through the
control system.
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 22
23
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 32
33
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 42
43
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 67
68
USEN
IMPORTANT SAFETY INSTRUCTIONS
BEFORE INSTALLING OR USING THIS FIXTURE READ ALL
INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS
MANUAL AND THE INSTALLATION NOTES
WARNING
Risk of electric shock! If casing is removed or handled, improperly
the internal components of the fixture may cause harm or become
permanently damaged. Do not expose the internal mechanisms/
components of this fixture to moisture.
1. All electrical installation and repair work should be carried out by a
qualified electrician or Dyson Field Service Technician in accordance
with current local codes or regulations.
2. Do not connect any DALI/1-10V/0-10V/PWM terminals to mains power.
DALI wires are NOT SELV and should never be considered safe to
touch. Basic level of isolation or better is required between DALI wires
and mains cabling.
3. To prevent movement and strain on the terminals, positive means of
field wiring securement must be provided during installation. The field
wiring shall be secured less than 3 inches from the cord entry and
considered with National Electrical Code.
4. This fixture must be installed in accordance with NEC or your
local electrical code. If you are not familiar with these codes and
requirements, consult a qualified electrician. This fixture should be
installed with appropriate fixings for the installation environment.
Conformity and compliance is the responsibility of the installer.
5. If any part of the fixture is not working as it should, has received a sharp
blow, has been dropped, damaged, left outdoors, or been in contact
with water, do not use and contact the Dyson Helpline.
6. CAUTION: Possibly hazardous optical radiation emitted from this
fixture. Do not stare at the light source. May be harmful to the eye.
The fixture should be positioned so that prolonged staring into the light
source at a distance closer than 2 ft (0.6m) is not expected.
7. Do not install or use with a damaged suspension cable. If the
suspension cable supplied is damaged it must be replaced by Dyson, its
service agent or similiarly qualified person in order to avoid a hazard.
8. This fixture is compatible with DALI/1-10V/0-10V/PWM compliant
control systems.
9. Use a dry, lint free cloth or compressed air (solvent and moisture free) to
clean the fixture. Ensure the fixture is switched off before cleaning.
10. Ensure no pipe work (gas, water, air) or electrical cables, wires or
ductwork are located directly behind the drilling/mounting area.
11. Check that the electrical supply corresponds to that shown on the rating
plate, if the fixture is connected to any electrical supply other than that
stated on the rating plate permanent damage or improper/unsafe
operation of the fixture may result.
12. The fixture must be earthed.
13. The fixture is designed for dry, internal location only. Operating
environment range 0°C (32°F) to 40°C (104°F) and 10-95% RH
non-condensing.
READ AND SAVE
THESE INSTRUCTIONS
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 68
69
USEN
THANK YOU FOR CHOOSING TO BUY A DYSON LIGHT
DYSON CUSTOMER CARE
Your fixture is covered for 5 years from the date of purchase, subject to the terms of the limited warranty.
Register your limited warranty now at www.dyson.com.
If you have any questions about your fixture, call the Dyson Helpline with your serial number and details of where and
when you bought the fixture.
Note your serial number here for future reference.
Your serial number can be found on the registration sheet in the box, and also on the large information sticker, which can
be found inside the driver box when the fixture is unpacked.
This illustration is for example purposes only.
A comprehensive installation guide is enclosed with the fixture's packaging. This contains detailed information on
the correct installation of the fixture, which MUST be adhered to completely, including routing of electrical cables.
Damage caused by incorrect installation is not covered by your warranty.
The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in
incorrect operation, damage to property and/or personal injury. Dyson will not be held liable for any damage to property
or personal injury, or any loss of business or revenue, if you, your staff, your installer or service engineers have not
followed the instructions given in this manual and the installation guide.
CONFORMITY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
YOUR WARRANTY
TERMS AND CONDITIONS OF THE DYSON 5 YEAR LIMITED WARRANTY.
If you have registered your fixture online, your warranty will start from the date of purchase. Please retain your proof
of purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture,
according to Dyson’s records.
This warranty will be void if the fixture is installed and used in a country outside the one in which it was sold.
WHAT IS COVERED
5 YEAR LIMITED WARRANTY
All factory parts of your light are covered against original defects, material and workmanship when used in accordance
with the owner’s manual and installation guide for a period of 5 years from the start of your warranty.
• Any parts that are returned and replaced by Dyson will become the property of Dyson.
• The replacement of any part of your unit under warranty will not extend the period of warranty.
• This limited warranty provides benefits, which are additional to and do not affect any statutory rights you may have
as a consumer. This limited warranty gives you legal rights, and you may have other rights which vary from state
to state.
WHAT IS NOT COVERED
Dyson shall not be liable for costs, damages or repairs incurred as a result of, due to, or from:
• Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance with the Dyson
Operating Manual.
• Use of parts not in accordance with the Dyson Operating Manual.
• Use of parts and accessories other than those produced or recommended by Dyson.
• Faulty installation or installation that does not precisely follow the installation instructions supplied by Dyson
(except where installed by Dyson).
• Repairs or alterations carried out by unauthorized parties or agents.
• External sources such as weather, electrical outages or power surges.
MANDATORY INSTALLATION
REQUIREMENTS FOR THE US &
CANADA
TO ENSURE THAT THE INSTALLATION OF THE FIXTURE COMPLIES
WITH UL REGULATIONS, THIS ADDITIONAL INSTALLATION
INFORMATION MUST BE FOLLOWED:
1. For Recess Mounting - The driver box must be installed within a metal
enclosure with has conduit access above the ceiling. This must be
obtained and fitted before installation of the fixture.
2. For Surface Mounting - An additional junction box adapter must be
used to connect the driver box to the junction box. Please contact the
Dyson Helpline to obtain this part.
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 69
70
• Normal wear and tear (e.g. fuse, etc.).
• Damage caused by cleaning which is not in line with the instructions in this manual. Do not use chemicals to clean
the fixture.
• Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
• Any electrical, flooding or structural damage, or any loss of business or revenue as a result of product failure.
If you are in any doubt as to what is covered by your warranty, please contact Dyson (details on the back cover).
WARRANTY LIMITATIONS AND EXCLUSIONS
• Any implied warranties relating to your machine including but not limited to warranty of merchantability or warranty
of fitness for a particular purpose, are limited to the duration of this warranty. This limitation is not allowed by some
States, and so this limitation may not apply to you.
• Your remedy for breach of this warranty is limited to the warranty service described below. Dyson will not be liable for
any consequential damages or incidental damages you may incur in connection with your purchase and use of your
machine. This limitation is not allowed by some States and so this limitation may not apply to you.
• This limited warranty gives you specific legal rights. You may also have other rights which vary by State.
• This limited warranty is not transferable.
IMPORTANT DATA PROTECTION INFORMATION
When registering your Dyson product:
• You will need to provide us with basic contact information to register your product and enable us to support
your warranty.
• When you register, you will have the opportunity to choose whether you would like to receive communications from
us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest
innovations. We never sell your information to third parties and only use information that you share with us as defined
by our privacy policies which are available on our website:privacy.dyson.com.
DISPOSAL INFORMATION
Dyson products are made from high grade recyclable materials. Recycle where possible.
IMPORTANT INFORMATION
• The light source of this fixture is not replaceable; when the light source reaches its end of life the whole fixture will need
to be replaced at the customer's expense.
• If your fixture needs servicing, please call the Dyson Helpline. Also visit the website at www.dyson.com.
Important note for Cu-Beam Duo product only:
• When connecting a DALI control system, only the function of dimming is possible. To adjust the upward and downward
light distribution, this must be done by manually adjusting the dial on the luminaire. See Installation guide for
further details.
Alternatively, there is the option when using a DALI system to install an individual DALI to analogue converter
(0-10 / 1-10 / PWM) on both the dimming and light distribution inputs. Please ensure the correct setting is selected on the
driver. See installation guide for further details.
• For 0-10/1-10/PWM systems, both dimming and upward/downward light distribution are controllable through the
control system.
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 73
74
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 74
75
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s
Page: 75
UK
0800 345 7788
ROI
01 401 8300
AU/NZ
1800 426 337
BR
1-888-397-6622
CA
1-877-397-6622
CN
4009 202 808
SG
+65 6643 2999
CZ
00800 777 55 777
DE
0800 31 31 31 9
AT
0800 8866 7343
CH
0848 807 817
DK
80705843
ES
902 305530
FI
020 741 1660
FR
0 800 945 802
BE
078 150980
HR
+385 1 38 18 139
IL
03-6762924
IT
800 976 027
JP
0120 295 731
KR
+65 6643 2999
MY
+65 6643 2999
NL
020 5219890
NO
80069196
PT
00 800 0 230 5 530
RU
8 800 100 100 2
SA/UAE
00 971 4 5076000
SE
0200125871
TR
0850 532 11 44
TW
886-2-8751-0599
HK
+852 2212 5615
USEN
1-888-397-6622
USES
1-888-397-6622
MX
1-888-397-6622
AR
1-888-397-6622
CL
1-888-397-6622
Dyson Customer Care
www.dyson.com/lighting
JN.88132 PN.308378-01-03 09.05.17 RCS PARIS 410 191 589
09.05.2017 14:34 - C88132_CU-BEAM_OPMAN_INT_X517_X566-OWNERS-OPMAN-88132.indd_15_4c0s

Question & answers

There are no questions about the Dyson Cu-Beam Duo yet.

Ask a question about the Dyson Cu-Beam Duo

Have a question about the Dyson Cu-Beam Duo but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dyson Cu-Beam Duo. Please make sure that you describe your difficulty with the Dyson Cu-Beam Duo as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.