Dell W3706MH manual

View a manual of the Dell W3706MH below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: LCD TV
  • Model/name: W3706MH
  • Filetype: PDF
  • Available languages: English, French, Spanish

Table of Contents

Page: 0
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Dell™ LCD TV
Owner’s Manual
Model W3202MH and W3706MH
W3202_3706MH_DAO_PROOF.book Page 1 Friday, October 7, 2005 2:26 PM
Page: 1
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your TV.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Dimension, OptiPlex, Inspiron, Latitude, Dell Precision, DellNet, TrueMobile, PowerApp,
PowerEdge, PowerConnect, and PowerVault are trademarks of Dell, Inc.; EMC is a registered trademark of EMC Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
August 2005 Rev. A00
W3202_3706MH_DAO_PROOF.book Page 2 Friday, October 7, 2005 2:26 PM
Page: 2
Contents 3
Contents
1 About Your TV
Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Left View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bottom View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Setting Up Your TV
Proper Location for Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3 Using Your Remote Control
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Your TV With a Universal or Learning Remote Control . . . . . . . . . . . . . . . . . 22
4 Using the TV Menu
Using Your Remote Control With the TV Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting Your TV Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Input Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PIP/PBP/POP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
W3202_3706MH_DAO_PROOF.book Page 3 Friday, October 7, 2005 2:26 PM
Page: 3
4 Contents
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5 Troubleshooting Your TV
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
General Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TV Menu Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Remote Control Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Self-Test Feature when Connected to a Computer. . . . . . . . . . . . . . . . . . 36
Problems When Using the TV as a Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6 Security Features
7 Specifications for Your TV
Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
W3202_3706MH_DAO_PROOF.book Page 4 Friday, October 7, 2005 2:26 PM
Page: 4
About Your TV 5
1
About Your TV
Front View
1 Input Source button Push to display the Input Select menu
2 Channel up/down button
Push to select the previous/next channel or navigate through
the TV Menu
3 Volume up/down button
Push to increase/decrease the volume or to select an TV Menu
option
4 Menu/OK button Push to display the TV Menu or to confirm your selection
5
Power button and light
(LED)
Push to turn the TV on and off
The power light is blue when the TV is on and amber when it is
in power saving mode
6 IR receiver Senses the signal from the remote control
1 2 3 4 5
6
W3202_3706MH_DAO_PROOF.book Page 5 Friday, October 7, 2005 2:26 PM
Page: 5
6 About Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Left View
1 S-Video connector (AV Side) Connect devices such as a video game system, a digital camera,
or a DVD player
2 Composite video connector
(AV Side)
Connect devices such as a VCR or DVD player
3 Audio connector (Left) Use this connector if you have connected a device to the
composite video connector or the S-Video connector
4 Audio connector (Right) Use this connector if you have connected a device to the
composite video connector or the S-Video connector
1
2
3
4
W3202_3706MH_DAO_PROOF.book Page 6 Friday, October 7, 2005 2:26 PM
Page: 6
About Your TV 7
Bottom View
1 TV Speaker out connectors Connect speakers
2 TV IN connector
(Analog/Digital)
Connect an antenna or a cable TV box using the coaxial cable
(It is a Digital/Analog combo tuner)
3 RS232 connector For factory use only
4 VOD connector Connect to the Ethernet cable for Video On Demand(VOD)
5 HDMI IN connector Connect devices such as a DVD player or set-top box
6 VGA connector Connect your computer using a VGA cable
*The component audio connectors(AV1 IN - L/R) is shared by
Component and VGA
7 Component audio and
video connectors (AV1 IN)
Connect devices such as a DVD player, set-top box, or cable TV box
*This Audio L/R pair is shared by Component and VGA
8 Audio-out connectors (L/R) Connect a device such as a VCR if you have connected an antenna or
cable TV through the TV IN connector
9 Power connector Connect your power cord
1 2 4 7 9
8
3 5 6
W3202_3706MH_DAO_PROOF.book Page 7 Friday, October 7, 2005 2:26 PM
Page: 7
8 About Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Package Contents
NOTE: If you need additional cables, contact Dell.
Power cord
Antenna (coaxial) cable
Component cable
RCA Audio (L/R) cable
Documentation
W3202_3706MH_DAO_PROOF.book Page 8 Friday, October 7, 2005 2:26 PM
Page: 8
About Your TV 9
Caring for Your TV
CAUTION: Only a licensed technician should service the TV. Do not disassemble the TV.
CAUTION: Before cleaning the TV, unplug it from the electrical outlet.
• To clean the surface of the panel, lightly dampen a soft, clean, lint-free cloth with water.
• To clean the TV cabinet, use a cloth lightly dampened with a mild detergent.
• Do not use chemicals such as benzene, thinner, ammonia, or any type of abrasive cleaner.
• Do not use compressed air to clean the TV.
W3202_3706MH_DAO_PROOF.book Page 9 Friday, October 7, 2005 2:26 PM
Page: 9
10 About Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
W3202_3706MH_DAO_PROOF.book Page 10 Friday, October 7, 2005 2:26 PM
Page: 10
Setting Up Your TV 11
2
Setting Up Your TV
CAUTION: Before you begin any of the setup procedures described in this section, follow the basic
safety instructions located in the Product Information Guide.
Proper Location for Your TV
Consider the following environmental factors when you are deciding where to put your TV:
• Ensure you allow adequate ventilation.
• Do not store or use the TV in locations that are exposed to high heat, high humidity, dusty
environment, direct sunlight, or extreme cold.
• Avoid moving the TV between locations with extreme temperature differences. For more
information, see Specifications on page 41.
• Do not subject the TV to severe vibration or high impact conditions. Do not place the TV
inside a car trunk.
• Do not place the TV in a location where water or other liquids could spill on or into the TV.
W3202_3706MH_DAO_PROOF.book Page 11 Friday, October 7, 2005 2:26 PM
Page: 11
12 Setting Up Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Connecting Your TV
The tables below provide a description of the connectors on your TV to help you decide which
connectors to use for your various video devices.
NOTE: Before you connect your TV , ensure you have all the proper cables. Some cables may come with
the device you are connecting. For a list of cables that came with your TV, see Package Contents on
page 8. To order additional cables, contact Dell.
Connecting Your Cable TV Box or Antenna
Connecting Your Video Devices
Quality Cable and Connector When to Use
Good Coaxial cable / TV IN Coaxial (RF) cable carries the analog/digital
video and audio signal from the antenna or
cable connector to your TV. The coaxial
connector is labeled TV IN (Analog/Digital).
To locate the TV IN connector, see "Bottom
View" on page 7.
Quality Cable and Connector When to Use
Good Composite cable / Video, Left, Right The composite connector carries the video signal
through a single pin. If you are using a composite
video connector, you also need to connect
composite audio cables. To locate the composite
connector, see "Left View" on page 6.
W3202_3706MH_DAO_PROOF.book Page 12 Friday, October 7, 2005 2:26 PM
Page: 12
Setting Up Your TV 13
Better S-Video cable / S-Video, Left, Right The S-Video connector splits the video signal into
two signals, black-and-white and color. If you are
using the S-Video connector, you also need to
connect the audio cables. To locate the S-Video
connector, see "Left View" on page 6.
Best Component (YPbPr) cable / AV1 IN The component connectors split the video signal
into three signals, two color and one black-and-
white. If you are using the component
connectors, you also need to connect the audio
cables. To locate the component connectors, see
"Bottom View" on page 7.
Excellent HDMI cable / HDMI IN HDMI (High Definition Multimedia Interface)
assures that the best video signal is always sent
from source (HDTV signal, DVD player) to the
TV. This is achieved by allowing uncompressed
video and multi-channel audio data to be sent to
the display device through a single cable. To
locate the connector, see "Bottom View" on
page 7.
Quality Cable and Connector When to Use
W3202_3706MH_DAO_PROOF.book Page 13 Friday, October 7, 2005 2:26 PM
Page: 13
14 Setting Up Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Using the TV IN Connector (Coaxial)
1 Turn off the TV and unplug the power cord.
2 Connect the coaxial cable to the TV IN connector on the TV.
3 Plug in the power cord for the TV and turn on the TV.
4 Enter the TV Menu and select TV or Digital TV. See "Input Select" on page 24 for more
information.
Using the Composite Connector
1 Turn off the TV and unplug the power cord.
2 Connect your device to the TV using the audio and video cable.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu select AV SIDE(Composite). See "Input Select" on page 24 for more
information.
W3202_3706MH_DAO_PROOF.book Page 14 Friday, October 7, 2005 2:26 PM
Page: 14
Setting Up Your TV 15
Using the S-Video Connector
1 Turn off the TV and unplug the power cord.
2 Connect your device using the S-Video and audio cables.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu and select AV SIDE(S-Video). See "Input Select" on page 24 for more
information.
Using the Component Connectors
1 Turn off the TV and unplug the power cord.
2 Connect your device using the component video and audio cables.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu and select the AV1 (Component). See "Input Select" on page 24 for
more information
W3202_3706MH_DAO_PROOF.book Page 15 Friday, October 7, 2005 2:26 PM
Page: 15
16 Setting Up Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Using the HDMI Connector
1 Turn off the TV and unplug the power cord.
2 Connect your device using the HDMI connector.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu and select the HDMI. See "Input Select" on page 24 for more
information.
Using the VGA Connector
1 Turn off the TV and unplug the power cord.
2 Connect the blue VGA cable to your TV and to your computer.
3 Connect the RCA stereo audio cable (stereo jack to RCA jack cable) to the AV1 IN audio
connectors(L/R) on the TV and to your computer.
4 Plug in the power cords for the TV display and devices and turn them on.
5 Enter the TV Menu and select the VGA. See "Input Select" on page 24 for more information.
W3202_3706MH_DAO_PROOF.book Page 16 Friday, October 7, 2005 2:26 PM
Page: 16
Setting Up Your TV 17
Using the VOD Connector
1 Turn off the TV and unplug the power cord.
2 Connect the Ethernet cable to the VOD connector on the TV.
3 Plug in the power cords for the TV and turn on the TV.
W3202_3706MH_DAO_PROOF.book Page 17 Friday, October 7, 2005 2:26 PM
Page: 17
18 Setting Up Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
W3202_3706MH_DAO_PROOF.book Page 18 Friday, October 7, 2005 2:26 PM
Page: 18
Using Your Remote Control 19
3
Using Your Remote Control
NOTE: The remote control for your Dell™ TV is an optional. If you would like to purchase a remote
control, contact Dell.
Installing Batteries
Before you can use your remote control, install three-AAA batteries.
1 Slide open the battery cover.
2 Install the batteries. Make sure that you match the + and - on the batteries with the + and -
symbols in the battery compartment.
3 Replace the battery cover.
W3202_3706MH_DAO_PROOF.book Page 19 Friday, October 7, 2005 2:26 PM
Page: 19
20 Using Your Remote Control
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Using Your Remote Control
4
21
5
6
20
18
19
7
14
11
10
16
9
8
12
13
15
17
2
3
22
1
23
24
25
W3202_3706MH_DAO_PROOF.book Page 20 Friday, October 7, 2005 2:26 PM
Page: 20
Using Your Remote Control 21
1 Power Turns the TV on and off
2 MENU Enters and exits the TV Main Menu
3 OK Press to confirm your selection
4 GUIDE Displays an electronic program guide when using Digital TV
NOTE: Content may vary depending on the broadcaster.
5 PICT Cycles through the preset options for the Picture menu
6 SLEEP Turns on the sleep timer
7 PREV CH Returns you to the previously viewed channel
8 Vol - Decreases the volume
9 CH down Push to view the previous channel
10 Number buttons Press to select a channel
11 - (dash) Press to select the sub-channel of Digital TV
12 POP/PBP Enters and exits POP or PBP mode
13 PIP SEL Toggles between windows when you use Picture-in-Picture
(PIP), Picture-Outside-Picture (POP), or Picture-By-Picture
(PBP)
14 INPUT Enters the Input Select menu
15 Arrow buttons In the TV Menu, use to navigate through the menus
16 INFO Displays information about your TV and channel you are
watching
17 AUDIO Cycles through the preset Audio options
18 WIDE Cycles through the size (aspect ratio) options from the Picture
Settings menu
19 MUTE Press to turn the sound on and off
20 CH up Push to view the next channel
21 Vol + Increases the volume
22 ENTER Press to confirm the channel frequency entry
23 POS Press to change the position of the PIP
, POP, or PBP window
24 SWAP Swaps images when using PIP
, POP, or PBP
25 PIP Enters and exits PIP mode
W3202_3706MH_DAO_PROOF.book Page 21 Friday, October 7, 2005 2:26 PM
Page: 21
22 Using Your Remote Control
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Using Your TV With a Universal or Learning Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV:
• Power
• Channel Up (+)
• Channel Down (-)
• Volume Up (+)
• Volume Down (-)
• Mute
• Input Select
NOTE: Future preprogrammed universal remote controls may be able to control more functions.
You can program universal remote controls to work with your Dell TV in the following ways:
• If the remote control manual lists codes by manufacturer, use the Philips codes.
• If the remote control has a search function, this function may be used to find the
correct code.
• If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE: For additional information, see the documentation that came with your universal or learning
remote control.
W3202_3706MH_DAO_PROOF.book Page 22 Friday, October 7, 2005 2:26 PM
Page: 22
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
(050622)\W3202MH_DAO_e40.fm
Using the TV Menu 23
4
Using the TV Menu
Your TV has the TV Menu that allows you to select the proper input source, make adjustments to
the image and audio settings, select to view Picture-In-Picture, Picture-Outside-Picture, and
Picture-By-Picture, and set parental controls.
Using Your Remote Control With the TV Menu
NOTE: You can access and make selections to the TV Menu using the volume and channel buttons on
the front panel of the TV or you can use the remote control. Except where noted, this section describes
how to use the TV Menu with the buttons on the front panel of the TV.
1 To enter the TV Menu, press the Menu button.
Eight icons appear along the bottom of the screen.
2 Use the volume up and down buttons to move between the icons. The icon appears
highlighted and a new menu appears as you move through the menu.
3 To select an option, push the OK button when the icon is highlighted.
4 Use the channel up and down buttons to move through the various settings.
NOTE: A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that you have selected.
5 Use the volume up and down buttons or the OK button to adjust or select settings.
NOTE: You can select Exit or press the Menu button at any time to return to the main menu.
6 After you have made your selections, push the Menu button to return to the main menu.
7 To exit the TV Menu, select the Exit icon and press the OK button.
W3202_3706MH_DAO_PROOF.book Page 23 Friday, October 7, 2005 2:26 PM
Page: 23
24 Using the TV Menu
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Selecting Your TV Menu Language
1 Press Menu to enter the TV Menu.
2 Select Setup.
3 In the Setup menu, select Language and scroll to select the language that you want the TV
Menu to appear in.
Input Select
The Input Select menu allows you to select the proper source based on how you have your TV and
video equipment connected. Press Input Source button on the front panel to go directly to the
Input Select menu. You can also press Menu and select Input Select from the main menu.
If you are using the Digital TV input source, you can preset the viewable channels. Go to the Main
Menu, select Setup, select Channel Setup, and then select Channel Search. If you are using the
TV IN connector, you need to preset the viewable channels for the Digital TV input source.
VGA — Select when you have your
computer connected to the VGA connector.
See "Bottom View" on page 7 for the
location of the VGA connector.
HDMI — Select when you have connected
a device, such as a DVD player using the
HDMI connector. See "Bottom View" on
page 7 for the location of the HDMI
connector.
DIGITAL TV — Select when you have
your antenna connected to the TV IN
connector. See "Bottom View" on page 7 for
the location of the TV IN connector.
AV1 (COMPONENT) — Select when you have a video device, such as a DVD player, set-top box,
or cable TV box connected to the component audio and video connectors on the bottom of the TV.
See "Bottom View" on page 7 for the location of the component audio and video connectors (AV1
IN).
AV SIDE (COMPOSITE) — Select when you have a video device, such as a video game system,
connected to the composite video and audio connectors on the left side of the TV. See "Left View"
on page 6 for the location of the composite video and audio connectors (Video, Left, Right).
AV SIDE (S-VIDEO) — Select when you have a video device, such as a VCR, connected to the S-
Video and audio connectors on the left side of the TV. See "Left View" on page 6 for the location of
the S-Video and audio connectors (S-Video, Left, Right).
W3202_3706MH_DAO_PROOF.book Page 24 Friday, October 7, 2005 2:26 PM
Page: 24
Using the TV Menu 25
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
SHOW INPUTS — Show Inputs allows you to select Active and All. Active searches for which
connectors are being used. The available input sources appear in white and input sources that are
not available appear in grey. All shows all the input sources and allows you to select all the input
sources even if you do not have a device connected.
NOTE: In TV Menu Settings, located in the Setup menu, you can set the Input Select to display the
device that you have attached. For example, AV1 (COMPONENT) would say DVD when you view the Input
Select menu.
Picture Settings
The Picture Settings allow you to adjust the appearance of the image including color and
brightness.
If you select one of the following preset image
settings the individual settings are
automatically updated.
•Movies
•Sports
•Weak Signal
•Multimedia
If you select Personal, you can adjust the
individual settings, such as Brightness and
Color.
The Color Temperature presets are:
•Natural: the native panel temperature
•Normal: 6500K
•Blue: 9300K
•Red: 5700K
W3202_3706MH_DAO_PROOF.book Page 25 Friday, October 7, 2005 2:26 PM
Page: 25
26 Using the TV Menu
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Audio Settings
The Audio Settings allow you to set the audio to best fit the type of show you are watching.
Midnight Mode — Evens out the large volume
variations between voice and action scenes.
If you select one of the following preset
Equalizer Mode settings, the individual audio
levels are automatically updated:
•Music
•Theater
•Voice
If you select Personal, you can adjust the
individual audio levels, such as Bass and Treble.
TV Out Volume — Select Fixed if you want to
adjust the volume using the remote or volume
control on an attached audio receiver. Select
Variable if you want to adjust the volume using the TV remote or front panel buttons. Using
Variable adjusts the TV volume out not the volume on an attached audio receiver.
Use Program to select Stereo, Mono, or SAP (Second Audio Program).
Use Mute to turn the TV sound on or off and use Speaker Out to turn on or off sound from the
speakers.
W3202_3706MH_DAO_PROOF.book Page 26 Friday, October 7, 2005 2:26 PM
Page: 26
Using the TV Menu 27
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
PIP/PBP/POP
You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside-
Picture (POP), or Picture-By-Picture (PBP).
The remote control offers the following
PIP/PBP/POP options:
• Use the PIP button or the POP/ PBP
button on the remote control to turn on
and off PIP, POP, and PBP.
• If you are in PIP, POP, or PBP mode, use
the SWAP button on the remote control to
switch between the two windows.
• Use the POS button on the remote to
change which corner of the screen the PIP
window appears.
In the TV Menu, you can adjust the Transparency, the Size, and H (horizontal) and V (vertical)
position of the PIP windows. When you are selecting the horizontal orientation, - moves the
window left and + moves the window to the right. When you are adjusting the vertical orientation,
0 is at the top of the screen and 100 is at the bottom of the screen.
PIP/PBP/POP Compatibility
When using PIP/PBP/POP you can select any of the input sources that appear in the
PIP/PBP/POP windows.
Primary Source
Digital TV AV1 AV SIDE
(Composite)
AV SIDE
(S-Video)
HDMI VGA
Digital TV No No No No Yes Yes
AV1
(Component)
No No No No Yes Yes
Secondary
Source
AV SIDE
(Composite)
No No No No Yes Yes
AV SIDE
(S-Video)
No No No No Yes Yes
HDMI Yes Yes Yes Yes No Yes
VGA Yes Yes Yes Yes Yes No
W3202_3706MH_DAO_PROOF.book Page 27 Friday, October 7, 2005 2:26 PM
Page: 27
28 Using the TV Menu
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Size
Size allows you to adjust the appearance of the image.
Use the following settings to adjust the aspect ratio:
Standard — Best selection for viewing digital HDTV, 16:9 or 22:9 DVD movies.
Zoom — Best selection for viewing TV, VCR or 4:3 DVD movie.
4:3 Aspect Ratio — Best selection for viewing TV, VCR or 4:3 DVD movie.
Wide — Best selection for viewing digital HDTV, 16:9 and 22:9 DVD movies.
Full Screen — Best selection for viewing digital HDTV or 16:9 DVD movies.
Horizontal Shift—Adjust the horizontal placement of the image.
NOTE: Most DVDs have information about the supported aspect ratio on the case.
W3202_3706MH_DAO_PROOF.book Page 28 Friday, October 7, 2005 2:26 PM
Page: 28
Using the TV Menu 29
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Parental Control
Parental Control allows you to block certain channels or programs so children cannot view
programs that are not age appropriate.
To enter the Parental Control menu, you need an access code. The first time you enter, use access
code 3355. "Setting an Access Code" on page 29 for information on creating a new access code.
You can set the following options to block content:
• Block Control — Turns on or off all your parental control settings
• Channel Lock — Blocks selected channels
• Movie Rating — Blocks movies based on their rating (G, PG, PG-13, R, NC-17, X, and
Unrated)
• TV Rating — Blocks TV shows based on their rating (TV-Y, Y7, G, PG, 14, MA, and No
Rating)
NOTE: You can use Clear All to unblock the channels and programs that you have set.
Setting an Access Code
After you enter the Parental Control menu for the first time, you can set your own four-digit access
code. If for any reason you lose or forget your access code, you can use the default code.
1 In the Parental Control menu, select Change Code.
2 Using the number pad on the remote control, enter a new access code.
3 Select Exit.
W3202_3706MH_DAO_PROOF.book Page 29 Friday, October 7, 2005 2:26 PM
Page: 29
30 Using the TV Menu
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
DELL CONFIDENTIAL – PRELIMINARY 10/7/05 – FOR PROOF ONLY
Setup
Setup allows you to adjust the appearance of the TV Menu, preset viewable cable channels, change
the language of the TV Menu (see "Selecting Your TV Menu Language" on page 24), and to
restore factory settings.
In the TV Menu Settings menu, use TV Menu
Hold Time to increase or decrease the amount
of time the TV Menu appears.The maximum
amount of time is 60 seconds.
You can select TV Button lock to lock the
buttons on the bottom panel. When this option
is enabled, only the power button functions.
Hold the volume up and the channel up
buttons together for 10 seconds to unlock the
buttons.
Channel Setup allows you adjust the settings
for individual channels and preset the viewable
channels. Select Antenna/Cable to select the
antenna or cable connected to your TV.
If you are using the Digital TV input source, you can preset the viewable channels. Select Channel
Search to search the viewable channels. While searching the channels, press the Menu or OK
button on the remote control to stop the searching. Select Channel Edit to edit the channels. If
the signal is weak or distorted, select Fine Tuning to fine-tune the channel manually.
If you are using the TV IN connector, you need to preset the viewable channels for the Digital TV
input source.
Timer Settings allows you to set the time which the TV turns on and off automatically.
Select Closed Caption to turn on and off closed captioning and set several other CC options.
W3202_3706MH_DAO_PROOF.book Page 30 Friday, October 7, 2005 2:26 PM
Page: 30
Troubleshooting Your TV 31
5
Troubleshooting Your TV
CAUTION: If at any time you see smoke or sparks coming from your TV, contact Dell. Do not try to
perform any troubleshooting steps.
Troubleshooting Tips
NOTE: Some problems may be related to your device. See the documentation for any devices connected
to your TV.
Most problems with your TV may be caused by not having the correct input selection. Each
connector on the TV (left and bottom) is associated with an input selection, which are labeled AV1
and AV SIDE in the Input Select menu.
• AV1 (Component) — Component connector on the bottom of the TV
• AV SIDE (Composite) — Composite connector on the left of the TV
• AVSIDE (S-Video) — S-Video connector on the left of the TV
You can also select the following input:
• DIGITAL TV — TV IN connector on the bottom of the TV
• VGA — VGA connector on the bottom of the TV
• HDMI — HDMI connector on the bottom of the TV
W3202_3706MH_DAO_PROOF.book Page 31 Friday, October 7, 2005 2:26 PM
Page: 31
32 Troubleshooting Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
General Problems
Problem Possible Solution
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
1 Check the aspect ratio settings in the TV Menu. Press the Menu
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
2 Connect the device using a different connector. For example, if
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE: To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
3 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
4 Adjust the color temperature. Press Menu button, select Picture
Settings, and then select Color Temperature.
NOTE: Some set top boxes offer aspect ratio. See your device
documentation for more information.
Poor picture quality when using a
device connected to the TV IN
(coaxial) connector
1 Ensure TV is selected as the input source in the Input Select
menu. See "Input Select" on page 24 for more information.
2 Press Menu buttton, select Setup, and then select Channel
Setup. This resets the channels on your TV.
3 Check the aspect ratio settings in the TV Menu. Press the Menu
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
4 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
5 Adjust the color temperature. Press Menu button, select Picture
Settings, and then select Color Temperature.
6 The problem may be with your device, contact your service
provider.
W3202_3706MH_DAO_PROOF.book Page 32 Friday, October 7, 2005 2:26 PM
Page: 32
Troubleshooting Your TV 33
Nothing appears on my TV 1 Ensure the TV is turned on.
2 Verify that all the cables are properly connected to the TV,
including the power cable.
3 Check to see if there is a blue or amber light on the lower,
right-hand corner of the TV. A blue light indicates the TV is on.
An amber light, means the TV is in power save mode.
4 Ensure the proper source is selected in the Input Select menu.
See "Input Select" on page 24 for more information.
5 Reconnect any devices that are currently connected to the TV. If
you are using multiple devices, connect and test one device at a
time.
6 Connect another device that you know is working properly.
7 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
No sound 1 Ensure mute is not turned on. Pressing the Mute button on
the remote control turns the mute function on and off.
2 If only certain TV channels do not have sound, then you need to
correct the Input Select menu in the TV Menu(see "Input
Select" on page 24).
3 Verify that the audio cables are firmly connected to both the
audio input connectors on your TV and audio output
connectors on your devices. Ensure that the cable colors match
the connectors colors.
4 Also, ensure that the audio cables are connected to the same
row as the video cables. See "About Your TV" on page 5 for the
location of the connectors.
5 Connect the device using a different connector. For example,
if you are experiencing the problem using a composite
connector, try using the component connector.
NOTE: To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
6 Test the device on a different TV.
7 If you are using PIP/PBP/POP, ensure the proper Audio Source
is selected. Press Menu button, and select PIP/PBP/POP
.
Double image or no image with DVD Turn off the progressive scan on the DVD player. Your Dell™ TV
offers built-in deinterlacer that is equal to or better quality than
the deinterlacer on your DVD player. For more information
about progressive scan on your DVD player, see the
documentation for your DVD player
Problem Possible Solution
W3202_3706MH_DAO_PROOF.book Page 33 Friday, October 7, 2005 2:26 PM
Page: 33
34 Troubleshooting Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Picture is too dim or too bright Update the color settings in the TV Menu. Press Menu button and
select Picture Settings.
The screen is not centered correctly 1 Update the size settings in the TV Menu. Press Menu button
and select Size.
2 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
Screen has one or more lines 1 Check the aspect ratio settings in the TV Menu. Press the Menu
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
2 Ensure the proper source is selected in the Input Select menu.
See "Input Select" on page 24 for more information.
3 Try connecting a different device. Ensure that you properly
connect the cables and update the input source in the TV
Menu.
4 Update the size settings in the TV Menu. Press Menu button
and select Size.
5 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
The front panel buttons do not work Check the TV Menu to see if the buttons have been locked. Press
Menu button, select Setup.
Use the front panel buttons to unlock the TV Menu and front
panel buttons:
1 Press the Menu button.
A message appears stating that the TV Menu and buttons are
locked.
2 While the message is on the screen, press the volume up and
channel up buttons on the front panel simultaneously for 3
seconds.
A message appears stating that the TV Menu and buttons are
unlocked.
The picture is too small 1 Adjust the size settings. Press Menu button, and select Size.
2 This may be a problem with your device. See the
documentation for the device.
Problem Possible Solution
W3202_3706MH_DAO_PROOF.book Page 34 Friday, October 7, 2005 2:26 PM
Page: 34
Troubleshooting Your TV 35
TV Menu Messages
While using your TV, the following messages may appear.
Remote Control Problems
Message Possible Solution
Auto Adjust No action required, the TV is performing an auto adjustment.
Out of Range Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
No Video Input 1 Check all cables are properly connected.
2 Ensure the proper source is selected in the Input Select menu.
See "Input Select" on page 24 for more information.
TV Buttons Locked To unlock, press Menu button, select Setup.
Use the front panel buttons to unlock the TV Menu and front
panel buttons:
1 Press the Menu button.
A message appears stating that the TV Menu and buttons are
locked.
2 While the message is on the screen, press the volume up and
channel up buttons on the front panel simultaneously for 10
seconds.
A message appears stating that the TV Menu and buttons are
unlocked.
Self Test Appears for computer source when there is nothing plugged in.
Select VGA from Input Select menu and nothing is plugged in.
Plug a computer in to the VGA.
Problem Possible Solution
The TV does not respond when using
the remote control
1 Point the remote control directly at the lower right corner of the
TV. Be sure that nothing is blocking the front of the TV. For the
location of the IR, see "Front View" on page 5.
2 Verify that the batteries are properly installed.
3 If the batteries are old, install new batteries.
NOTE: Bright lights or other infrared devices may interfere with
your remote control and IR on the TV.
W3202_3706MH_DAO_PROOF.book Page 35 Friday, October 7, 2005 2:26 PM
Page: 35
36 Troubleshooting Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Using the Self-Test Feature when Connected to a Computer
When your computer is connected to the TV through VGA connector you can use the self-test
feature to check whether your TV is functioning properly. If your TV and computer are properly
connected but the TV screen remains dark, run the TV self-test by performing the following steps:
1 Turn off both your computer and the TV.
2 Unplug the video cable from the back of the computer.
3 Turn on the TV.
If the TV cannot sense a video signal and is working correctly, the floating "Dell - Self-Test
Feature Check" dialog box appears on the screen (against a black background).
While in self-test mode, the power light remains blue and the self-test pattern scrolls through
the screen continually. This box also appears during normal system operation if the video
cable becomes disconnected or damaged.
4 Turn off your TV and reconnect the video cable; then turn on both your computer and the
TV. If your TV screen remains blank, the problem may be with your computer or graphic card.
See your computer documentation for more information.
Problems When Using the TV as a Monitor
NOTE: You can only connect your computer to the TV using a VGA connector.
Problem Possible Solution
The picture is off-centered or too small 1 Use Auto Adjust to check the Image Settings. Press Menu
button to enter the TV Menu, select Image Settings, and then
select Auto Adjust.
2 Check the optimal resolution settings.
You may need to download a new video driver. For more
information, go to support.dell.com.
NOTE: Some older video cards may not support the resolution
settings for the TV.
W3202_3706MH_DAO_PROOF.book Page 36 Friday, October 7, 2005 2:26 PM
Page: 36
Troubleshooting Your TV 37
No audio 1 Ensure the green audio cable is connected to audio connectors
on the TV and on the computer. For the location of the
connector on the TV, see "Using the VGA Connector" on
page 16. See your computer documentation for the location of
connectors on your computer.
2 Ensure the volume on the computer is not muted.
3 Verify that sound on your computer is working by checking the
speakers. See your computer documentation for information on
troubleshooting your computer.
4 Disconnect the TV from the computer and test to see if the TV
volume works.
PIP/PBP/POP not working 1 Ensure the settings in the TV Menu are properly set. Press
Menu button to enter the TV Menu, and select PIP/PBP/POP
.
2 Swap the video and audio source.
No video NOTE: If you see a self-test, it means there is a problem with
your video card or you are using the wrong input source.
1 Ensure the TV is turned on.
2 Verify that all the cables are properly connected to the TV,
including the power cable.
3 Check to see if there is a blue or amber light on the lower,
right-hand corner of the TV. A blue light indicates the TV is on.
An amber light, means the TV is in power save mode.
4 Ensure VGA is selected in the Input Select menu. See "Input
Select" on page 24 for more information.
5 Reconnect the computer.
6 Connect another device that you know is working properly.
7 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
Problem Possible Solution
W3202_3706MH_DAO_PROOF.book Page 37 Friday, October 7, 2005 2:26 PM
Page: 37
38 Troubleshooting Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
W3202_3706MH_DAO_PROOF.book Page 38 Friday, October 7, 2005 2:26 PM
Page: 38
Security Features 39
6
Security Features
Additional 8X Torx screws
to secure speakers
- (Speakers are optional)
Additional Torx screws (4X)
- Secure TV head
4X non-headed, T10, M5 threaded
screw to bottom of TV stand base
W3202_3706MH_DAO_PROOF.book Page 39 Friday, October 7, 2005 2:26 PM
Page: 39
40 Security Features
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
2" table top
W3202_3706MH_DAO_PROOF.book Page 40 Friday, October 7, 2005 2:26 PM
Page: 40
Specifications for Your TV 41
7
Specifications for Your TV
General
Model number W3202MH LCD TV
W3706MH LCD TV
Display type TFT COLOR Normally Black Premium LCD
Screen size 32inch panel (W3202MH)
37inch panel (W3706MH)
Viewable area 697.7 x 392.3 mm (W3202MH)
819.6 x 460.8 mm (W3706MH)
Image aspect ratio Wide screen
16:9 resolution
16:9 aspect ratio
Brightness (typical) 450 nits (W3202MH)
500 nits (W3706MH)
Contrast Ratio 1000:1 (typical)(W3202MH)
800:1 (typical) (W3706MH)
Video Display Capabilities 480i
480p
576i
576p
720p
1080i
Additional Features:
SAP capable
CC capable
Parental control capable
Yes
Yes
Yes
W3202_3706MH_DAO_PROOF.book Page 41 Friday, October 7, 2005 2:26 PM
Page: 41
42 Specifications for Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Physical Dimension
Display (with stand) 790 x 568 x 208.7mm (W3202MH)
910.3 x 637.5 x 252.75mm (W3706MH)
Display (no stand) 790 x 485.4 x 114.5mm(W3202MH)
910.3 x 552.5 x 114.5mm (W3706MH)
With Speakers 933.8 x 568 x 208.7mm (W3202MH)
1074.3 x 637.5 x 252.75mm (W3706MH)
Weight (with stand) 21kg (W3202MH)
28kg (W3706MH)
Native Resolution 1366 x 768 (WXGA)
HDTV Capable Yes
Picture-In-Picture
Picture-In-Picture (PIP) Yes
Picture-Outside-Picture (POP) Yes
Picture-By-Picture (PBP) Yes
Number of Tuners 1 (Digital/Analog)
Viewing Angle
Horizontal +/- 89 degrees (W3202MH)
+/- 89 degrees (W3706MH)
Vertical +/- 89 degrees (W3202MH)
+/- 89 degrees (W3706MH)
Inputs
Video
Composite (CVBS) one (side)
S-Video one (side)
Component one (bottom)
TV IN (coaxial) one (bottom)
W3202_3706MH_DAO_PROOF.book Page 42 Friday, October 7, 2005 2:26 PM
Page: 42
Specifications for Your TV 43
Audio (L+R) two pairs in total (side and bottom)
*Audio L/R pair on the side is shared by
Composite and S-Video.
*Audio L/R pair on the bottom is shared by
Component and VGA.
HDMI(for use with a video device) one (bottom)
Computer
VGA (for use as computer monitor) one (bottom)
Audio (L+R) one (bottom)
*Audio L/R pair on the bottom is shared by
Component and VGA.
Others
RS232
VOD
one (bottom)
one (bottom)
Outputs
Audio out (L+R) one (bottom)
Audio
Effects Midnight Mode
Speakers (separate) 15 watts/channel
30 watts total
Inputs
W3202_3706MH_DAO_PROOF.book Page 43 Friday, October 7, 2005 2:26 PM
Page: 43
44 Specifications for Your TV
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
W3202_3706MH_DAO_PROOF.book Page 44 Friday, October 7, 2005 2:26 PM
Page: 44
Contacting Dell 45
Contacting Dell
To contact Dell electronically, you can access the following websites:
• www.dell.com
• support.dell.com (technical support)
• premiersupport.dell.com (technical support for educational, government, healthcare, and
medium/large business customers, including Premier, Platinum, and Gold customers)
For specific web addresses for your country, find the appropriate country section in the table below.
NOTE: Toll-free numbers are for use within the country for which they are listed.
NOTE: In certain countries, technical support specific to Dell Inspiron™ XPS computers is available at a
separate telephone number listed for participating countries. If you do not see a telephone number listed
that is specific for Inspiron XPS computers, you may contact Dell through the technical support number
listed and your call will be routed appropriately.
When you need to contact Dell, use the electronic addresses, telephone numbers, and codes
provided in the following table. If you need assistance in determining which codes to use, contact a
local or an international operator.
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
Anguilla General Support toll-free: 800-335-0031
Antigua and Barbuda General Support 1-800-805-5924
Argentina (Buenos Aires)
International Access Code: 00
Country Code: 54
City Code: 11
Website: www.dell.com.ar
E-mail: us_latin_services@dell.com
E-mail for desktop and portable computers:
la-techsupport@dell.com
E-mail for servers and EMC®
storage products:
la_enterprise@dell.com
Customer Care toll-free: 0-800-444-0730
Tech Support toll-free: 0-800-444-0733
Tech Support Services toll-free: 0-800-444-0724
Sales 0-810-444-3355
Aruba General Support toll-free: 800-1578
W3202_3706MH_DAO_PROOF.book Page 45 Friday, October 7, 2005 2:26 PM
Page: 45
46 Contacting Dell
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Australia (Sydney)
International Access Code:
0011
Country Code: 61
City Code: 2
E-mail (Australia): au_tech_support@dell.com
E-mail (New Zealand):
nz_tech_support@dell.com
Home and Small Business 1-300-655-533
Government and Business toll-free: 1-800-633-559
Preferred Accounts Division (PAD) toll-free: 1-800-060-889
Customer Care toll-free: 1-800-819-339
Technical Support (portables and desktops) toll-free: 1-300-655-533
Technical Support (servers and workstations) toll-free: 1-800-733-314
Corporate Sales toll-free: 1-800-808-385
Transaction Sales toll-free: 1-800-808-312
Fax toll-free: 1-800-818-341
Austria (Vienna)
International Access Code: 900
Country Code: 43
City Code: 1
Website: support.euro.dell.com
E-mail:
tech_support_central_europe@dell.com
Home/Small Business Sales 0820 240 530 00
Home/Small Business Fax 0820 240 530 49
Home/Small Business Customer Care 0820 240 530 14
Preferred Accounts/Corporate Customer Care 0820 240 530 16
Home/Small Business Technical Support 0820 240 530 14
Preferred Accounts/Corporate Technical
Support
0660 8779
Switchboard 0820 240 530 00
Bahamas General Support toll-free: 1-866-278-6818
Barbados General Support 1-800-534-3066
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
W3202_3706MH_DAO_PROOF.book Page 46 Friday, October 7, 2005 2:26 PM
Page: 46
Contacting Dell 47
Belgium (Brussels)
International Access Code: 00
Country Code: 32
City Code: 2
Website: support.euro.dell.com
E-mail for French-speaking Customers:
support.euro.dell.com/be/fr/emaildell/
Technical Support for Inspiron XPS computers
only
02 481 92 96
Technical Support for all other Dell computers 02 481 92 88
Technical Support Fax 02 481 92 95
Customer Care 02 713 15 .65
Corporate Sales 02 481 91 00
Fax 02 481 92 99
Switchboard 02 481 91 00
Bermuda General Support 1-800-342-0671
Bolivia General Support toll-free: 800-10-0238
Brazil
International Access Code: 00
Country Code: 55
City Code: 51
Website: www.dell.com/br
Customer Support, Technical Support 0800 90 3355
Technical Support Fax 51 481 5470
Customer Care Fax 51 481 5480
Sales 0800 90 3390
British Virgin Islands General Support toll-free: 1-866-278-6820
Brunei
Country Code: 673
Customer Technical Support (Penang,
Malaysia)
604 633 4966
Customer Service (Penang, Malaysia) 604 633 4949
Transaction Sales (Penang, Malaysia) 604 633 4955
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
W3202_3706MH_DAO_PROOF.book Page 47 Friday, October 7, 2005 2:26 PM
Page: 47
48 Contacting Dell
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Canada (North York, Ontario)
International Access Code: 011
Online Order Status: www.dell.ca/ostatus
AutoTech (automated technical support) toll-free: 1-800-247-9362
Customer Care (Home Sales/Small Business) toll-free: 1-800-847-4096
Customer Care (med./large business,
government)
toll-free: 1-800-326-9463
Technical Support (Home Sales/Small
Business)
toll-free: 1-800-847-4096
Technical Support (med./large bus.,
government)
toll-free: 1-800-387-5757
Technical Support (printers, projectors,
televisions, handhelds, digital jukebox, and
wireless)
1-877-335-5767
Sales (Home Sales/Small Business) toll-free: 1-800-387-5752
Sales (med./large bus., government) toll-free: 1-800-387-5755
Spare Parts Sales & Extended Service Sales 1 866 440 3355
Cayman Islands General Support 1-800-805-7541
Chile (Santiago)
Country Code: 56
City Code: 2
Sales, Customer Support, and Technical
Support
toll-free: 1230-020-4823
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
W3202_3706MH_DAO_PROOF.book Page 48 Friday, October 7, 2005 2:26 PM
Page: 48
Contacting Dell 49
China (Xiamen)
Country Code: 86
City Code: 592
Technical Support website:
support.dell.com.cn
Technical Support E-mail:
cn_support@dell.com
Customer Care E-mail:
customer_cn@dell.com
Technical Support Fax 592 818 1350
Technical Support (Dell™ Dimension™ and
Inspiron)
toll-free: 800 858 2969
Technical Support (OptiPlex™, Latitude™, and
Dell Precision™)
toll-free: 800 858 0950
Technical Support (servers and storage) toll-free: 800 858 0960
Technical Support (projectors, PDAs, switches,
routers, and so on)
toll-free: 800 858 2920
Technical Support (printers) toll-free: 800 858 2311
Customer Care toll-free: 800 858 2060
Customer Care Fax 592 818 1308
Home and Small Business toll-free: 800 858 2222
Preferred Accounts Division toll-free: 800 858 2557
Large Corporate Accounts GCP toll-free: 800 858 2055
Large Corporate Accounts Key Accounts toll-free: 800 858 2628
Large Corporate Accounts North toll-free: 800 858 2999
Large Corporate Accounts North Government
and Education
toll-free: 800 858 2955
Large Corporate Accounts East toll-free: 800 858 2020
Large Corporate Accounts East Government
and Education
toll-free: 800 858 2669
Large Corporate Accounts Queue Team toll-free: 800 858 2572
Large Corporate Accounts South toll-free: 800 858 2355
Large Corporate Accounts West toll-free: 800 858 2811
Large Corporate Accounts Spare Parts toll-free: 800 858 2621
Colombia General Support 980-9-15-3978
Costa Rica General Support 0800-012-0435
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
W3202_3706MH_DAO_PROOF.book Page 49 Friday, October 7, 2005 2:26 PM
Page: 49
50 Contacting Dell
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
Czech Republic (Prague)
International Access Code: 00
Country Code: 420
Website: support.euro.dell.com
E-mail: czech_dell@dell.com
Technical Support 22537 2727
Customer Care 22537 2707
Fax 22537 2714
Tech Fax 22537 2728
Switchboard 22537 2711
Denmark (Copenhagen)
International Access Code: 00
Country Code: 45
Website: support.euro.dell.com
E-mail: support.euro.dell.com/dk/da/emaildell/
Technical Support for Inspiron XPS computers
only
7010 0074
Technical Support for all other Dell computers 7023 0182
Customer Care (Relational) 7023 0184
Home/Small Business Customer Care 3287 5505
Switchboard (Relational) 3287 1200
Switchboard Fax (Relational) 3287 1201
Switchboard (Home/Small Business) 3287 5000
Switchboard Fax (Home/Small Business) 3287 5001
Dominica General Support toll-free: 1-866-278-6821
Dominican Republic General Support 1-800-148-0530
Ecuador General Support toll-free: 999-119
El Salvador General Support 01-899-753-0777
Finland (Helsinki)
International Access Code: 990
Country Code: 358
City Code: 9
Website: support.euro.dell.com
E-mail: support.euro.dell.com/fi/fi/emaildell/
Technical Support 09 253 313 60
Customer Care 09 253 313 38
Fax 09 253 313 99
Switchboard 09 253 313 00
Country (City)
International Access Code
Country Code
City Code
Department Name or Service Area,
Website and E-Mail Address
Area Codes,
Local Numbers, and
Toll-Free Numbers
W3202_3706MH_DAO_PROOF.book Page 50 Friday, October 7, 2005 2:26 PM

Question & answers

There are no questions about the Dell W3706MH yet.

Ask a question about the Dell W3706MH

Have a question about the Dell W3706MH but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell W3706MH. Please make sure that you describe your difficulty with the Dell W3706MH as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.