Dell P2719H manual

View a manual of the Dell P2719H below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Monitor
  • Model/name: P2719H
  • Filetype: PDF
  • Available languages: English, Spanish, Portuguese

Table of Contents

Page: 0
Dell
P2219H/P2319H/P2419H/P2719H
User’s Guide
Model: P2219H/P2319H/P2419H/P2719H
Regulatory model: P2219Hb/P2319Ht/P2319Hc/P2419Hb/P2419Hc/P2719Ht
Page: 1
NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss
of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks
are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners.
2018 - 06
Rev. A00
Page: 2
  │  3
Contents
About your monitor. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . 9
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Side view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Monitor specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Resolution specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Supported video modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Preset display modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Environmental characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power management modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Plug and play capability . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Universal Serial Bus (USB) interface . . . . . . . . . . . . . . . . 27
USB 3.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
USB 2.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
USB 3.0 upstream connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
USB 3.0 downstream connector. . . . . . . . . . . . . . . . . . . . . . . . . . 28
USB 2.0 downstream connector. . . . . . . . . . . . . . . . . . . . . . . . . . 29
USB ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LCD monitor quality and pixel policy . . . . . . . . . . . . . . . . 29
Maintenance guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Page: 3
4  │ 
Cleaning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . .31
Attaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting your monitor . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the DisplayPort (DisplayPort to DisplayPort) cable. . 33
Connecting the VGA cable (optional) . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the HDMI cable (optional) . . . . . . . . . . . . . . . . . . . . . 34
Connecting the USB 3.0 cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Organizing your cables. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Removing the monitor stand . . . . . . . . . . . . . . . . . . . . . . 35
VESA wall mounting (optional) . . . . . . . . . . . . . . . . . . . . 36
Operating the monitor . . . . . . . . . . . . . . . . . . . . . . .37
Power on the monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using the front-panel controls. . . . . . . . . . . . . . . . . . . . . 37
Front-panel button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the On-Screen Display (OSD) menu . . . . . . . . . . . 39
Accessing the menu system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
OSD warning message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting the maximum resolution . . . . . . . . . . . . . . . . . . . 54
Tilt, swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Vertical extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Rotating the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Rotate clockwise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Rotate counterclockwise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Adjusting the rotation display settings of your system . . 58
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Self-test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Built-in diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Common problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Page: 4
  │  5
Product specific problems . . . . . . . . . . . . . . . . . . . . . . . . 65
Universal Serial Bus (USB) specific problems . . . . . . . . . 66
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
FCC notices (U.S. only) and other regulatory
information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Page: 5
6  │  About your monitor
About your monitor
Package contents
Your monitor ships with the components shown in the table below. If any
component is missing, contact Dell technical support. For more information, see
Contact Dell.
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: If you are attaching a stand that you purchased from any other
source, follow the set up instructions that were included with the
stand.
Monitor
Stand riser
Page: 6
About your monitor  │  7
Stand base
Power cable (varies by
country)
DisplayPort cable
VGA cable (Japan only)
HDMI cable (shipped with
P2219H/P2319H/P2719H,
for Brazil only)
USB 3.0 upstream cable
(enables the USB ports on
the monitor)
• Quick Setup Guide
• Safety, Environmental,
and Regulatory
Information
Page: 7
8  │  About your monitor
Product features
The Dell P2219H/P2319H/P2419H/P2719H flat panel display has an active
matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight.
The monitor features include:
• P2219H: 54.6 cm (21.5-inch) viewable area (measured diagonally).
Resolution: Up to 1920 x 1080 through VGA, DisplayPort, and HDMI, with full-
screen support or lower resolutions.
• P2319H: 58.4 cm (23.0-inch) viewable area (measured diagonally).
Resolution: Up to 1920 x 1080 through VGA, DisplayPort, and HDMI, with full-
screen support or lower resolutions.
• P2419H: 60.5 cm (23.8-inch) viewable area (measured diagonally).
Resolution: Up to 1920 x 1080 through VGA, DisplayPort, and HDMI, with full-
screen support or lower resolutions.
• P2719H: 68.6 cm (27.0-inch) viewable area (measured diagonally).
Resolution: Up to 1920 x 1080 through VGA, DisplayPort, and HDMI, with full-
screen support or lower resolutions.
• Color gamut of 72% NTSC.
• Tilt, swivel, height, and rotate adjustment capabilities.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Digital connectivity with DisplayPort and HDMI.
• Equipped with 1 USB upstream port and 4 USB downstream ports.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Security lock slot.
• Stand lock.
• 0.3 W standby power when in sleep mode.
• Optimize eye comfort with a flicker-free screen.
WARNING: The possible long-term effects of blue light emission from
the monitor may cause damage to the eyes, including eye fatigue,
digital eye strain, and so on. ComfortView feature is designed to reduce
the amount of blue light emitted from the monitor to optimize eye
comfort.
Page: 8
About your monitor  │  9
Identifying parts and controls
Front view
Front panel controls
Label Description
1 Function buttons (For more information, see Operating the monitor)
2 Power On/Off button (with LED indicator)
Page: 9
Back view with monitor stand
Label Description Use
1 VESA mounting holes (100 mm
x 100 mm - behind attached
VESA Cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from the monitor.
4 Security lock slot Secures monitor with security lock
(security lock not included).
5 Barcode, serial number, and
Service Tag label
Refer to this label if you need to
contact Dell for technical support.
6 Cable-management slot Use to organize cables by inserting
them through the slot.
10  │  About your monitor
Back view
Page: 10
Label Description Use
1 USB downstream ports (2) Connect your USB device.
NOTE: To use these ports, you must
connect the USB cable (shipped with
your monitor) to the USB-upstream
port on the monitor and to your
computer.
About your monitor  │  11
Side view
Page: 11
Bottom view without monitor stand
Label Description Use
1 Power connector Connect the power cable (shipped with
your monitor).
2 HDMI port Connect your computer with HDMI cable
(shipped with P2219H/P2319H/P2719H,
for Brazil only).
3 Stand lock feature To lock the stand to the monitor using a
M3 x 6 mm screw (screw not included).
4 DisplayPort Connect your computer with DisplayPort
cable (shipped with your monitor).
5 VGA connector Connect your computer with VGA cable
(shipped with your monitor, for Japan
only).
6 USB upstream port Connect the USB cable (shipped with
your monitor) to this port and your
computer to enable the USB ports on
your monitor.
7 USB downstream ports (2) Connect your USB device.
NOTE: To use this port, you must
connect the USB cable (shipped with
your monitor) to the USB-upstream port
on the monitor and to your computer.
12  │  About your monitor
Bottom view
Page: 12
About your monitor  │  13
Monitor specifications
Model P2219H P2319H
Screen type Active matrix - TFT LCD
Panel technology In-Plane Switching Technology
Aspect ratio 16:9
Viewable image
Diagonal
Width (active area)
Height (active area)
Total area
546.10 mm (21.5 inches)
476.06 mm (18.74 inches)
267.79 mm (10.54 inches)
127484.10 mm2
(197.60 inch2)
584.20 mm (23.0 inches)
509.18 mm (20.05 inches)
286.42 mm (11.28 inches)
145839.33 mm2
(226.05 inch2)
Pixel pitch 0.248 mm x 0.248 mm 0.265 mm x 0.265 mm
Pixel per inch (PPI) 102 96
Viewing angle 178° (vertical) typical
178° (horizontal) typical
Luminance output 250 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Anti-Glare with 3H hardness
Backlight LED edgelight system
Response time 8 ms (Normal)
5 ms (Fast)
Color depth 16.7 million colors
Color gamut 72% (CIE1931)
NOTE: Color gamut (typical) is based on CIE1976
(82%) and CIE1931 (72%) test standards.
Built-in devices • USB 3.0 super-speed hub (with 1 x USB 3.0 upstream
port)
• 2 x USB 3.0 downstream ports
• 2 x USB 2.0 downstream ports
Page: 13
14  │  About your monitor
Ports and connectors • 1 x DisplayPort version 1.2
• 1 x HDMI port version 1.4
• 1 x VGA port
• 1 x USB 3.0 upstream port (bottom)
• 2 x USB 3.0 downstream ports (side)
• 2 x USB 2.0 downstream ports (bottom)
Border width (edge of
monitor to active area)
5.62 mm (Top/Left/Right)
19.99 mm (Bottom)
5.40 mm (Top/Left/Right)
19.86 mm (Bottom)
Adjustability
Height adjustable stand
Tilt
Swivel
Pivot
130 mm
-5° to 21°
-45° to 45°
-90° to 90°
Dell Display Manager
compatibility
Yes
Security Security lock slot (cable lock sold separately)
Model P2419H P2719H
Screen type Active matrix - TFT LCD
Panel technology In-Plane Switching Technology
Aspect ratio 16:9
Viewable image
Diagonal
Width (active area)
Height (active area)
Total area
604.52 mm (23.8 inches)
527.04 mm (20.75 inches)
296.46 mm (11.67 inches)
156246.27 mm2
(242.16 inch2
)
685.99 mm (27.0 inches)
597.88 mm (23.54 inches)
336.31 mm (13.24 inches)
201073.02 mm2
(311.67 inch2
)
Pixel pitch 0.275 mm x 0.275 mm 0.311 mm x 0.311 mm
Pixel per inch (PPI) 92 82
Viewing angle 178° (vertical) typical
178° (horizontal) typical
Page: 14
About your monitor  │  15
Luminance output 250 cd/m² (typical) 300 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Anti-Glare with 3H hardness
Backlight LED edgelight system
Response time 8 ms (Normal)
5 ms (Fast)
Color depth 16.7 million colors
Color gamut 72% (CIE1931)
NOTE: Color gamut (typical) is based on CIE1976
(82%) and CIE1931 (72%) test standards.
Built-in devices • USB 3.0 super-speed hub (with 1 x USB 3.0 upstream
port)
• 2 x USB 3.0 downstream ports
• 2 x USB 2.0 downstream ports
Ports and connectors • 1 x DisplayPort version 1.2
• 1 x HDMI port version 1.4
• 1 x VGA port
• 1 x USB 3.0 upstream port (bottom)
• 2 x USB 3.0 downstream ports (side)
• 2 x USB 2.0 downstream ports (bottom)
Border width (edge of
monitor to active area)
5.38 mm (Top/Left/Right)
20.31 mm (Bottom)
6.00 mm (Top/Left/Right)
20.70 mm (Bottom)
Adjustability
Height adjustable stand
Tilt
Swivel
Pivot
130 mm
-5° to 21°
-45° to 45°
-90° to 90°
Dell Display Manager
compatibility
Yes
Security Security lock slot (cable lock sold separately)
Page: 15
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
16  │  About your monitor
Resolution specifications
Supported video modes
Video display capabilities (VGA,
HDMI & DP playback)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Preset display modes
Display mode Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
Pixel clock
(MHz)
Sync polarity
(Horizontal/
Vertical)
VESA, 640 x 480
VESA, 640 x 480
IBM, 720 x 400
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 900
VESA, 1920 x 1080
Model P2219H/P2319H/P2419H/P2719H
Model P2219H/P2319H/P2419H/P2719H
31.5 60.0 25.2 -/-
37.5 75.0 31.5 -/-
31.5 70.0 28.3 -/+
37.9 60.0 40.0 +/+
46.9 75.0 49.5 +/+
48.4 60.0 65.0 -/-
60.0 75.0 78.8 +/+
67.5 75.0 108.0 +/+
64.0 60.0 108.0 +/+
80.0 75.0 135.0 +/+
60.0 60.0 108.0 +/+
67.5 60.0 148.5 +/+
Page: 16
Video input signals • Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75
ohm input impedance
• HDMI 1.4, 600 mV for each differential line, 100 ohm
input impedance per differential pair
• DisplayPort 1.2, 600 mV for each differential line, 100
ohm input impedance per differential pair
AC input voltage/
frequency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5 A
(typical)
Inrush current • 120 V: 30 A (Max.) at 0 °C (cold start)
• 240 V: 60 A (Max.) at 0 °C (cold start)
About your monitor  │  17
Electrical specifications
Physical characteristics
Model P2219H/P2319H/P2419H/P2719H
Model P2219H P2319H
Signal cable type • Digital: DisplayPort, 20 pins
• Digital: HDMI, 19 pins (cable not included, except for
Brazil)
• Analog: D-Sub, 15 pins (cable not included, except
for Japan)
• Universal Serial Bus: USB, 9 pins
Dimensions (with stand)
Height (extended) 472.0 mm (18.58 inches) 481.1 mm (18.94 inches)
Height (compressed) 353.4 mm (13.91 inches) 351.1 mm (13.82 inches)
Width 487.3 mm (19.19 inches) 520.0 mm (20.47 inches)
Depth 166.0 mm (6.54 inches) 166.0 mm (6.54 inches)
Dimensions (without stand)
Height 293.4 mm (11.55 inches) 311.7 mm (12.27 inches)
Width 487.3 mm (19.19 inches) 520.0 mm (20.47 inches)
Depth 41.3 mm (1.63 inches) 41.3 mm (1.63 inches)
Page: 17
18  │  About your monitor
Stand dimensions
Height (extended) 400.8 mm (15.78 inches) 400.8 mm (15.78 inches)
Height (compressed) 353.4 mm (13.91 inches) 353.4 mm (13.91 inches)
Width 206.0 mm (8.11 inches) 206.0 mm (8.11 inches)
Depth 166.0 mm (6.54 inches) 166.0 mm (6.54 inches)
Base 206.0 mm x 166.0 mm
(8.11 inches x 6.54 inches)
206.0 mm x 166.0 mm
(8.11 inches x 6.54 inches)
Weight
Weight with packaging 6.26 kg (13.80 lb) 7.00 kg (15.43 lb)
Weight with stand
assembly and cables
4.72 kg (10.41 lb) 5.11 kg (11.27 lb)
Weight without stand
assembly (For wall
mount or VESA mount
considerations - no
cables)
2.75 kg (6.06 lb) 3.11 kg (6.86 lb)
Weight of stand
assembly
1.62 kg (3.57 lb) 1.67 kg (3.68 lb)
Front frame gloss 2-4 (only front chin)
Model P2419H P2719H
Signal cable type • Digital: DisplayPort, 20
pins
• Digital: HDMI, 19 pins
(cable not included)
• Analog: D-Sub, 15 pins
(cable not included,
except for Japan)
• Universal Serial Bus:
USB, 9 pins
• Digital: DisplayPort, 20
pins
• Digital: HDMI, 19 pins
(cable not included,
except for Brazil)
• Analog: D-Sub, 15 pins
(cable not included,
except for Japan)
• Universal Serial Bus:
USB, 9 pins
Dimensions (with stand)
Height (extended) 486.1 mm (19.14 inches) 524.3 mm (20.64 inches)
Page: 18
About your monitor  │  19
Height (compressed) 356.1 mm (14.02 inches) 394.3 mm (15.52 inches)
Width 537.8 mm (21.27 inches) 609.9 mm (24.01 inches)
Depth 166.0 mm (6.54 inches) 185.0 mm (7.28 inches)
Dimensions (without stand)
Height 322.2 mm (12.68 inches) 363.0 mm (14.29 inches)
Width 537.8 mm (21.17 inches) 609.9 mm (24.01 inches)
Depth 42.8 mm (1.69 inches) 42.8 mm (1.69 inches)
Stand dimensions
Height (extended) 400.8 mm (15.78 inches) 418.4 mm (16.47 inches)
Height (compressed) 353.4 mm (13.91 inches) 371.0 mm (14.61 inches)
Width 206.0 mm (8.11 inches) 245.0 mm (9.65 inches)
Depth 166.0 mm (6.54 inches) 185.0 mm (7.28 inches)
Base 206.0 mm x 166.0 mm
(8.11 inches x 6.54 inches)
245.0 mm x 185.0 mm
(9.65 inches x 7.28 inches)
Weight
Weight with packaging 7.10 kg (15.65 lb) 9.05 kg (19.95 lb)
Weight with stand
assembly and cables
5.25 kg (11.57 lb) 6.67 kg (14.70 lb)
Weight without stand
assembly (For wall
mount or VESA mount
considerations - no
cables)
3.26 kg (7.19 lb) 4.35 kg (9.59 lb)
Weight of stand
assembly
1.67 kg (3.68 lb) 1.93 kg (4.25 lb)
Front frame gloss 2-4 (only front chin)
Page: 19
20  │  About your monitor
Environmental characteristics
Model P2219H/P2319H/P2419H/P2719H
Compliant standards
• ENERGY STAR certified monitor
• EPEAT Gold registered in the U.S. EPEAT registration varies by country. See
www.epeat.net for registration status by country
• RoHS-compliant
• TCO certified displays
• BFR/PVC free monitor (excluding external cables)
• Arsenic-free glass and Mercury-free for the panel only
Temperature
Operating 0 °C to 40 °C (32 °F to 104 °F)
Non-operating • Storage: -20 °C to 60 °C (-4 °F to 140 °F)
• Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
Operating 20% to 80% (non-condensing)
Non-operating • Storage: 10% to 90% (non-condensing)
• Shipping: 10% to 90% (non-condensing)
Altitude
Operating 5000 m (16404 ft) (maximum)
Non-operating 12192 m (40000 ft) (maximum)
Thermal dissipation
P2219H • 126.24 BTU/hour (maximum)
• 58.00 BTU/hour (typical)
P2319H • 136.58 BTU/hour (maximum)
• 54.63 BTU/hour (typical)
P2419H • 143.40 BTU/hour (maximum)
• 61.46 BTU/hour (typical)
P2719H • 197.95 BTU/hour (maximum)
• 64.85 BTU/hour (typical)
Page: 20
About your monitor  │  21
Power management modes
If you have VESA's DPM™ compliance display card or software installed on your
computer, the monitor can automatically reduce its power consumption when not in
use. This is referred to as Power Save Mode*. If the computer detects input from
the keyboard, mouse, or other input devices, the monitor automatically resumes to
function. The following table shows the power consumption and signaling of this
automatic power saving feature.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
P2219H
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indicator
Power
consumption
Normal
operation
Active Active Active White 37 W
(maximum)**
17 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(blinking)
Less than
0.3 W
Switch off - - - Off Less than
0.3 W
Energy Star Power consumption
Pon 15.7 W
ETEC 49.8 kWh
P2319H
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indicator
Power
consumption
Normal
operation
Active Active Active White 40 W
(maximum)**
16 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(blinking)
Less than
0.3 W
Switch off - - - Off Less than
0.3 W
Page: 21
Energy Star Power consumption
Pon 15.9 W
ETEC 50.8 kWh
22  │  About your monitor
P2419H
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indicator
Power
consumption
Normal
operation
Active Active Active White 42 W
(maximum)**
18 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(blinking)
Less than
0.3 W
Switch off - - - Off Less than
0.3 W
Energy Star Power consumption
Pon 17.0 W
ETEC 53.9 kWh
P2719H
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indicator
Power
consumption
Normal
operation
Active Active Active White 58 W
(maximum)**
19 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(blinking)
Less than
0.3 W
Switch off - - - Off Less than
0.3 W
Page: 22
Energy Star Power consumption
Pon 15.0 W
ETEC 47.2 kWh
About your monitor  │  23
** Maximum power consumption with max luminance, and USB active.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
NOTE:
Pon: Power consumption of on mode as defined in Energy Star 7.0
version.
ETEC: Total energy consumption in kWh as defined in Energy Star 7.0
version.
Page: 23
Pin
number
15-pin side of the
connected signal cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 Computer 5 V/3.3 V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
24  │  About your monitor
Pin assignments
VGA connector
Page: 24
Pin
number
20-pin side of the
connected signal cable
1 ML3 (n)
2 GND
3 ML3 (p)
4 ML2 (n)
5 GND
6 ML2 (p)
7 ML1 (n)
8 GND
9 ML1 (p)
10 ML0 (n)
11 GND
12 ML0 (p)
13 GND
14 GND
15 AUX (p)
16 GND
17 AUX (n)
18 Hot Plug Detect
19 Re-PWR
20 +3.3 V DP_PWR
About your monitor  │  25
DisplayPort connector
Page: 25
Pin
number
19-pin side of the
connected signal cable
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5V POWER
19 HOT PLUG DETECT
26  │  About your monitor
HDMI connector
Page: 26
About your monitor  │  27
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so that the system can
configure itself and optimize the monitor settings. Most monitor installations are
automatic; you can select different settings if desired. For more information about
changing the monitor settings, see Operating the monitor.
Universal Serial Bus (USB) interface
This section gives you information about the USB ports that are available on the
monitor.
Transfer speed Data rate Power consumption
Super-speed 5 Gbps 4.5 W (Max, each port)
High speed 480 Mbps 4.5 W (Max, each port)
Full speed 12 Mbps 4.5 W (Max, each port)
NOTE: This monitor is Super-Speed USB 3.0 and High-Speed USB 2.0
compatible.
USB 3.0
USB 2.0
Transfer speed Data rate Power consumption
High speed 480 Mbps 2.5 W (Max, each port)
Full speed 12 Mbps 2.5 W (Max, each port)
Low speed 1.5 Mbps 2.5 W (Max, each port)
Page: 27
Pin number
1 VCC
2 D-
3 D+
4 GND
5 SSTX-
6 SSTX+
7 GND
8 SSRX-
9 SSRX+
28  │  About your monitor
USB 3.0 upstream connector
USB 3.0 downstream connector
9-pin side of the connector
Pin number 9-pin side of the connector
1 VCC
2 D-
3 D+
4 GND
5 SSRX-
Page: 28
About your monitor  │  29
USB 2.0 downstream connector
Pin number
1 VCC
2 DMD
3 DPD
4 GND
USB ports
• 1 upstream - bottom
• 2 downstream - bottom
• 2 downstream - side
NOTE: USB 3.0 functionality requires a USB 3.0-capable computer.
NOTE: The USB ports on the monitor work only when the monitor is
turned On or in power save mode. If you turn Off the monitor and then
turn it On, the attached peripherals may take a few seconds to resume
normal functionality.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not
affect the display quality or usability. For more information on Dell Monitor Quality
and Pixel Policy, see www.dell.com/support/monitors.
6 SSRX+
7 GND
8 SSTX-
9 SSTX+
4-pin side of the connector
Page: 29
30  │  About your monitor
Maintenance guidelines
Cleaning your monitor
CAUTION: Read and follow the Safety instructions before cleaning the
monitor.
WARNING: Before cleaning the monitor, unplug the monitor power
cable from the electrical outlet.
For best practices, follow the instructions in the list below when unpacking,
cleaning, or handling your monitor:
• To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
If possible, use a special screen-cleaning tissue or solution suitable for the
anti-static coating. Do not use benzene, thinner, ammonia, abrasive cleaners,
or compressed air.
• Use a lightly-dampened, warm cloth to clean the monitor. Avoid using
detergent of any kind as some detergents leave a milky film on the monitor.
• If you notice white powder when you unpack your monitor, wipe it off with a
cloth.
• Handle your monitor with care as a darker-colored monitor may get scratched
and show white scuff marks more than a lighter-colored monitor.
• To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.
Page: 30
Setting up the monitor  │  31
Setting up the monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
To attach the monitor stand:
1. Follow the instructions on the flaps of carton to remove the stand from the
top cushion that secures it.
2. Insert the stand base blocks fully into the stand slot.
3. Lift the screw handle and turn the screw clockwise.
4. After fully tightening the screw, fold the screw handle flat within the recess.
Page: 31
32  │  Setting up the monitor
5. Lift the cover, as shown, to expose the VESA area for stand assembly.
6. Attach the stand assembly to the monitor.
a. Fit the two tabs on the upper part of the stand to the groove on the back of
the monitor.
b. Press the stand down till it snaps into place.
7. Place the monitor upright.
NOTE: Lift the monitor carefully to prevent it from slipping or falling.
Page: 32
Setting up the monitor  │  33
Connecting your monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety instructions.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect the VGA, DisplayPort or HDMI cable from your monitor to the
computer.
Connecting the DisplayPort (DisplayPort to DisplayPort) cable
Connecting the VGA cable (optional)
Page: 33
34  │  Setting up the monitor
Connecting the HDMI cable (optional)
NOTE: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
Connecting the USB 3.0 cable
After you have completed connecting the VGA/DisplayPort/HDMI cable, follow the
procedures below to connect the USB 3.0 cable to the computer and complete
your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB
3.0 port on your computer. (See Bottom view for details.)
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
NOTE: Use the cable slot on the monitor stand to organize the cables.
4. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display
an image, see Universal Serial Bus (USB) specific problems.
Page: 34
Setting up the monitor  │  35
Organizing your cables
After attaching all necessary cables to your monitor and computer, (See
Connecting your monitor for cable attachment,) organize all cables as shown
above.
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
Page: 35
36  │  Setting up the monitor
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor.
VESA wall mounting (optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable flat table.
2. Remove the stand. (See Removing the monitor stand)
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall. For more information, see the documentation
that shipped with the wall mounting kit.
NOTE: For use only with with UL or CSA or GS-listed wall mount
bracket with minimum weight or load bearing capacity of 11.00 kg
(P2219H) / 12.44 kg (P2319H) / 13.04 kg (P2419H) / 17.40 kg (P2719H).
Page: 36
Operating the monitor  │  37
Operating the monitor
Power on the monitor
Press the Power button to turn On the monitor.
Using the front-panel controls
Use the control buttons on the front of the monitor to adjust settings.
The following table describes the front-panel buttons:
Front-panel button Description
1
Shortcut key/
Preset Modes
Use this button to choose from a list of preset color
modes.
2
Shortcut key/
Input Source
Use this button to choose from a list of video
signals that may be connected to your monitor.
Page: 37
38  │  Operating the monitor
Front-panel button
Use the buttons on the front of the monitor to adjust the image settings.
Front-panel button Description
1
Up
Use the Up button to adjust (increase ranges) items in
the OSD menu.
2
Down
Use the Down button to adjust (decrease ranges) items
in the OSD menu.
3
OK
Use the OK button to confirm your selection.
4
Back
Use the Back button to go back to the previous menu.
3
Menu
Use the MENU button to launch the On-Screen
Display (OSD). See Accessing the menu system.
4
Exit
Use this button to exit the OSD main menu.
5
Power
(with power light
indicator)
Use the Power button to turn the monitor On and
Off.
The white light indicates the monitor is On and fully
functional. A blinking white light indicates the
power save mode.
Page: 38
Operating the monitor  │  39
Using the On-Screen Display (OSD) menu
Accessing the menu system
NOTE: If you change the settings and then either proceed to another
menu or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and
then wait for the OSD menu to disappear.
1. Press the button to launch the OSD menu and display the main menu.
NOTE: Auto Adjust is only available when you use the analog (VGA)
connector.
2. Press the and buttons to move between the setting options. As you
move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
3. Press the or or button once to activate the highlighted option.
4. Press the and buttons to select the desired parameter.
5. Press to enter the submenu and then use the directional buttons,
according to the indicators on the menu, to make your changes.
6. Select the button to return to the main menu.
Page: 39
40  │  Operating the monitor
Icon Menu and
Submenus
Description
Brightness/
Contrast
Use this menu to activate Brightness/Contrast
adjustment.
Brightness Brightness adjusts the luminance of the backlight.
Press the button to increase the brightness and
press the button to decrease the brightness (min.
0 / max. 100).
NOTE: Manual adjustment of Brightness is disabled
when Dynamic Contrast is switched On.
Contrast Adjust the Brightness first, and then adjust the
Contrast only if further adjustment is necessary.
Press the button to increase the contrast and
press the button to decrease the contrast (min. 0
/ max. 100).
The Contrast function adjusts the degree of
difference between darkness and lightness on the
monitor screen.
Page: 40
Operating the monitor  │  41
Auto Adjust Use this menu to activate automatic setup and adjust
menu.
Auto Adjust allows the monitor to self-adjust to the
incoming video signal. After using Auto Adjust, you
can further tune your monitor by using the Pixel
Clock (Coarse) and Phase (Fine) controls under
Display settings.
NOTE: In most cases, Auto Adjust produces the
best image for your configuration.
NOTE: Auto Adjust option is only available when
you are using the analog (VGA) connector.
Page: 41
42  │  Operating the monitor
Input Source Use the Input Source menu to select between the
different video signals that may be connected to your
monitor.
VGA Select the VGA input when you are using the analog
(VGA) connector.
DP Select the DP input when you are using the
DisplayPort (DP) connector.
HDMI Select the HDMI input when you are using the HDMI
connector.
Auto Select Turning on the function allows you to scan for
available input sources.
Reset Input
Source
Reset your monitor input settings to the factory
settings.
Color Use Color to adjust the color setting mode.
Page: 42
Operating the monitor  │  43
Preset Modes Allows you to choose from a list of preset color
modes.
• Standard: Loads the monitor's default color
settings. This is the default preset mode.
• ComfortView: Decreases the level of blue light
emitted from the screen to make viewing more
comfortable for your eyes.
WARNING: The possible long-term effects of
blue light emission from the monitor may
cause personal injury such as digital eye
strain, eye fatigue and damage to the eyes.
Using monitor for extended periods of time
may also cause pain in parts of body such as
neck, arm, back and shoulder.
To reduce the risk of eye strain and neck/arm/
back/shoulder pain from using the monitor for long
periods of time, we suggest you to:
1. Set the distance of the screen between 20 to
28 inches (50 - 70 cm) from your eyes.
2. Blink frequently to moisten your eyes or wet
your eyes with water after prolonged usage of
the monitor.
3. Take regular and frequent breaks for 20 minutes
every two hours.
4. Look away from your monitor and gaze at a
distant object at 20 feet away for at least 20
seconds during the breaks.
5. Perform stretches to relieve tension in the neck,
arm, back, and shoulders during the breaks.
• Movie: Loads color settings ideal for movies.
• Game: Loads color settings ideal for most gaming
applications.
• Warm: Increases the color temperature. The
screen appears warmer with a red/yellow tint.
• Cool: Decreases the color temperature. The
screen appears cooler with a blue tint.
Page: 43
44  │  Operating the monitor
Preset Modes • Custom Color: Allows you to manually adjust the
color settings.
Use the and buttons to adjust the three
colors (R, G, B) values and create your own preset
color mode.
Input Color
Format
Allows you to set the video input mode to:
RGB: Select this option if your monitor is connected
to a computer (or DVD player) using the DisplayPort
or HDMI cable.
YPbPr: Select this option if your DVD player
supports only YPbPr output.
Page: 44
Operating the monitor  │  45
Hue This feature can shift the color of the video image to
green or purple. This is used to adjust the desired
flesh tone color. Use or to adjust the hue from
'0' to '100'.
NOTE: Hue adjustment is available only when you
select Movie or Game preset mode.
Saturation This feature can adjust the color saturation of the
video image. Use or to adjust the saturation
from '0' to '100'.
NOTE: Saturation adjustment is available only
when you select Movie or Game preset mode.
Reset Color Reset your monitor’s color settings to the factory
settings.
Page: 45
46  │  Operating the monitor
Display Use Display to adjust image.
Aspect Ratio Adjusts the image ratio to Wide 16:9, 4:3, or 5:4.
Horizontal
Position
Use or to adjust the image left or right.
Minimum is '0' (-).
Maximum is '100' (+).
Vertical
Position
Use or to adjust the image up or down.
Minimum is '0' (-).
Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position
adjustments are only available for VGA input.
Page: 46
Operating the monitor  │  47
Sharpness This feature can make the image look sharper or
softer.
Use or to adjust the sharpness from '0' to
'100'.
Pixel Clock The Phase and Pixel Clock adjustments allow you
to adjust your monitor to your preference.
Use or to adjust for best image quality.
Phase If satisfactory results are not obtained using the
Phase adjustment, use the Pixel Clock (coarse)
adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase adjustments are only
available for VGA input.
Dynamic
Contrast
Allows you to increase the level of contrast to
provide sharper and more detailed image quality.
Use to enter the submenu. Then use to turn
on or turn off the Dynamic Contrast function.
NOTE: Dynamic Contrast provides higher contrast
if you select Game or Movie preset mode.
Response Time Allows you to set the Response Time to Normal or
Fast.
Reset Display Select this option to restore default display settings.
Page: 47
48  │  Operating the monitor
Menu Select this option to adjust the settings of the OSD,
such as, the languages of the OSD, the amount of
time the menu remains on screen, and so on.
Language Sets the OSD display to one of the eight languages
(English, Spanish, French, German, Brazilian
Portuguese, Russian, Simplified Chinese, or
Japanese).
Rotation Rotates the OSD by 90 degrees counter-clockwise.
You can adjust the menu according to your Display
Rotation.
Transparency Select this option to change the menu transparency
by pressing the and buttons (min. 0 / max.
100).
Timer Sets the length of time the OSD will remain active
after the last time you pressed a button.
Use or to adjust the slider in 1 second
increments, from 5 to 60 seconds.
Reset Menu Reset all OSD settings to the factory preset values.
Page: 48
Operating the monitor  │  49
Personalize
Shortcut Key 1 Allows you to choose a feature from Preset Modes,
Brightness/Contrast, Auto Adjust, Input Source,
Aspect Ratio, or Rotation and set it as a shortcut
key.
Shortcut Key 2
Power Button
LED
Allows you to set the power LED indicator On or Off
to save energy.
USB Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB ON/OFF under standby mode is only
available when the USB upstream cable is
unplugged. This option will be greyed out when the
USB upstream cable plugs in.
Reset
Personalization
Reset all settings under the Personalize menu to
the factory preset values.
Page: 49
50  │  Operating the monitor
Others Select this option to adjust the OSD settings, such as
DDC/CI, LCD Conditioning, and so on.
Display Info Displays the monitor's current settings.
DDC/CI DDC/CI (Display Data Channel/Command Interface)
allows your monitor parameters (brightness, color
balance, and etc.) to be adjustable via the software
on your computer. You can disable this feature by
selecting Off. Enable this feature for best user
experience and optimum performance of your
monitor.

Question & answers

There are no questions about the Dell P2719H yet.

Ask a question about the Dell P2719H

Have a question about the Dell P2719H but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell P2719H. Please make sure that you describe your difficulty with the Dell P2719H as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.