Dell P2419HC manual

Select a language NL 100%

View a manual of the Dell P2419HC below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Monitor
  • Model/name: P2419HC
  • Filetype: PDF
  • Available languages: ,

Table of Contents

Page: 0
Model: P2219HC/P2419HC/P2719HC
Regulatory model: P2219HCb/P2419HCb/P2719HCt
Dell USB-C Monitor
P2219HC/P2419HC/P2719HC
User’s Guide
Page: 1
NOTE: A NOTE indicates important information that helps you make
better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
Copyright © 2018-2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other
trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their
respective owners.
2019 – 10   
Rev. A03
Page: 2
Contents
About Your Monitor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Package Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Product Features .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
Identifying Parts and Controls .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Monitor Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
Plug-and-Play .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26
LCD Monitor Quality and Pixel Policy .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26
Setting Up the Monitor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27
Attaching the stand  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27
Using the Tilt, Swivel, and Vertical Extension .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 28
Connecting Your Monitor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 30
Organizing Your Cables  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 32
Removing the Monitor Stand .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 33
Wall Mounting (Optional)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 34
Operating the Monitor  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Turning on the Monitor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Using the Front Panel Controls  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Front‑Panel Button .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 37
Using the On-Screen Display (OSD) Menu  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 38
 Contents |     3
Page: 3
4    | Contents  
Troubleshooting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 54
Self-Test .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 54
Built-in Diagnostics .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 56
Always On USB Type-C Charging .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 57
Common Problems .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 59
Product Specific Problems .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 61
Universal Serial Bus (USB) Specific Problems .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 62
Appendix .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 63
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 63
FCC Notices (U.S. only) and Other Regulatory Information  .  .  .  .  .  .  .  .  . 63
Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting Up Your Monitor  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .64
Maintenance Guidelines .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 66
Page: 4
About Your Monitor |     5
About Your Monitor
Package Contents
Your monitor ships with the components shown below. Make sure that you have received all
the components and contact Dell if something is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features or media may not be available in certain countries.
Monitor
Stand riser
Stand base
Power cable (varies by country)
Page: 5
6     | About Your Monitor
USB Type-C cable (C to C)
DP cable
Cable Tie
• Quick Setup Guide
• Safety,Environmental,and
Regulatory Information
Product Features
The Dell P2219HC/P2419HC/P2719HC monitor has an active matrix, thinfilm transistor
(TFT), liquid crystal display (LCD), and LED backlight. The monitor features include:
• P2219HC: 54.6 cm (21.5-inch) viewable area display (measured diagonally).
1920 x 1080 resolution with full-screen support for lower resolutions.
• P2419HC: 60.5 cm (23.8-inch) viewable area display (measured diagonally).
1920 x 1080 resolution with full-screen support for lower resolutions.
• P2719HC: 68.6 cm (27.0-inch) viewable area display (measured diagonally).
1920 x 1080 resolution with full-screen support for lower resolutions.
• Color gamut of 72% NTSC.
• Tilt, swivel, height and rotate adjustment capabilities.
• Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.
• Digital connectivity with DisplayPort and HDMI.
• Equipped with 4 USB downstream ports.
• Single USB Type-C to supply power to compatible notebook while receiving video
signal.
• Plug and play capable if supported by your system.
• Minimize eye discomfort with a flicker-free screen.
• The possible long-term effects of blue light emission from the monitor may cause
damage to the eyes, including eye fatigue or digital eye strain. ComfortView feature is
designed to reduce the amount of blue light emitted from the monitor to optimize eye
comfort.
• On-screen display (OSD) adjustments for easy setup and screen optimization.
• Security lock slot.
Page: 6
About Your Monitor |     7
• Stand lock.
• Energy Gauge shows the energy level being consumed by the monitor in real time.
• Arsenic-free glass and Mercury-free for the panel only.
• 0.3 W standby power when in the sleep mode.
Identifying Parts and Controls
Front view
Label Description
1 Function buttons (For more information, see Operating the Monitor)
2 Power on/off button (with LED indicator)
Page: 7
8     | About Your Monitor
Back View
Label Description Use
1 VESA mounting holes (100
mm x 100 mm - behind
attached VESA Cover)
Wall mount monitor using VESA-compatible wall
mount kit (100 mm x 100 mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from the monitor.
4 Security lock slot Secures monitor with security lock (sold separately).
5 Barcode, serial number,
and Service Tag label
Refer to this label if you need to contact Dell for
technical support.
6 Cable-management slot Use to organize cables by inserting them through the
slot.
Page: 8
About Your Monitor |     9
Side View
Label Description Use
1 USB downstream ports (2) Connect your USB device.
NOTE: You can only use this connector after you
have connected the USB Type-C cable to the
computer and USB Type-C connector on the monitor.
Page: 9
10     | About Your Monitor
Bottom View
Label Description Use
1 Power connector Connect the power cable.
2 HDMI connector Connect your computer with HDMI cable (sold
separately).
3 Stand lock feature To lock the stand to the monitor using a M3 x 6 mm
screw (screw not included).
4 DP connector (in) Connect your computer with DisplayPort cable.
5 DP connector (out) DP output for MST (multi-stream transport) capable
monitor. DP 1.1 monitor can only be connected as the
last monitor in the MST chain. To enable MST, refer
to instruction on section “Connecting the Monitor for
DP MST Function”.
NOTE: Remove the rubber plug when using DP out
connector.
6 USB Type-C connector You can attach the monitor to a computer using a
USB Type-C cable to get the monitor experience as
below: support data transmission speed up to USB
3.1. Display resolution up to 1920x1080@60Hz on
DisplayPort™ 1.2 alternate mode. Power delivery of
20V/3.25A, 15V/3A, 9V/3A, 5V/3A.
NOTE: USB Type-C is not supported on versions of
Windows prior to Windows 10.
7 USB downstream ports (2) Connect your USB device.
NOTE: You can only use this connector after you
have connected the USB Type-C cable to the
computer and USB Type-C connector on the monitor.
Page: 10
About Your Monitor |     11
Monitor Specifications
Model P2219HC P2419HC
Screen type Active matrix - TFT LCD
Panel Type In-Plane Switching Technology
Aspect ratio 16:9
Viewable image dimensions
Diagonal 546.10 mm (21.5 inches) 604.52 mm (23.8 inches)
Active Area
Horizontal 476.06 mm (18.74 inches) 527.04 mm (20.75 inches)
Vertical 267.79 mm (10.54 inches) 296.46 mm (11.67 inches)
Area 127484.10 mm²
(197.60 inches²)
156246.27 mm²
(242.18 inches²)
Pixel pitch 0.248 mm x 0.248 mm 0.275 mm x 0.275 mm
Pixel per inch (PPI) 102 92
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 250 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Anti-Glare with 3H hardness
Backlight LED Edgelight system
Response Time (Gray to Gray) 8 ms (NORMAL mode)
5 ms (FAST mode)
Color depth 16.7 million colors
Color gamut 72% (CIE1931)
NOTE: Color gamut (typical) is based on CIE1976
(82%) and CIE1931 (72%) test standards.
Connectivity • 1 HDMI port
• 1 DP(in) port
• 1 DP(out) port
• 1 USB Type-C port
• 2 USB 2.0 downstream ports (rear)
• 2 USB 3.0 downstream ports (side)
Border width (edge of monitor to
active area)
5.62 mm (Top/Left/
Right)
19.99 mm (Bottom)
5.38 mm (Top/Left/
Right)
20.31 mm (Bottom)
Adjustability
Page: 11
12     | About Your Monitor
Height adjustable stand
Tilt
Swivel
Pivot
130 mm
-5° to 21°
-45° to 45°
-90° to 90°
Dell Display Manager (DDM)
Compatibility
Easy Arrange
and other key features
Security Security lock slot (cable lock sold separately)
Model P2719HC
Screen type Active matrix - TFT LCD
Panel Type In-Plane Switching Technology
Aspect ratio 16:9
Viewable image dimensions
Diagonal 686 mm (27 inches)
Active Area
Horizontal 597.88 mm (23.54 inches)
Vertical 336.31 mm (13.24 inches)
Area 201073.02 mm² (311.66 inches²)
Pixel pitch 0.3114 mm x 0.3114 mm
Pixel per inch (PPI) 81.59
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 300 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Anti-Glare with 3H hardness
Backlight LED Edgelight system
Response Time (Gray to Gray) 14 ms (typical)
8 ms (NORMAL mode)
5 ms (FAST mode)
Color depth 16.7 million colors
Color gamut 72% (CIE1931)
NOTE: Color gamut (typical) is based on CIE1976
(82%) and CIE1931 (72%) test standards.
Page: 12
About Your Monitor |     13
Connectivity • 1 HDMI port
• 1 DP(in) port
• 1 DP(out) port
• 1 USB Type-C port
• 2 USB 2.0 downstream ports (rear)
• 2 USB 3.0 downstream ports (side)
Border width (edge of monitor to
active area)
6.0 mm (Top/Left/Right)
20.7 mm (Bottom)
Adjustability
Height adjustable stand
Tilt
Swivel
Pivot
130 mm
-5° to 21°
-45° to 45°
-90° to 90°
Dell Display Manager (DDM)
Compatibility
Easy Arrange
and other key features
Security Security lock slot (cable lock sold separately)
Resolution Specifications
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
Video input capabilities
(HDMI & DP playback)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Page: 13
14     | About Your Monitor
Preset Display Modes
Display Mode Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/
Vertical)
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
IBM, 720 x 400 31.5 70.0 28.3 -/+
VESA, 800 x 600 37.9 60.0 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
VESA, 1920 x 1080 67.5 60.0 148.5 +/+
MST Multi-Stream Transport (MST) Modes
MST Source Monitor Maximum number of external monitors that can
be supported
1920 x 1080/60 Hz
1920 x 1080/60 Hz 1 (Use USB Type-C)
3 (Use DP)
NOTE: Maximum external monitor resolution supported is 1920x1080 60Hz only.
Electrical Specifications
Model P2219HC/P2419HC
Video input signals • HDMI 1.4, 600 mV for each differential line, 100 ohm
input impedance per differential pair
• DisplayPort 1.2, 600 mV for each differential line, 100
ohm input impedance per differential pair
• USB Type-C, 600mV for each differential line, 90
ohm input impedance per differential pair
AC Input voltage/ frequency/
current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.5A (typical)
Inrush current • 120 V: 40 A (Max.) at 0 °C (cold start)
• 240 V: 80 A (Max.) at 0 °C (cold start)
Page: 14
About Your Monitor |     15
Model P2719HC
Video input signals • HDMI 1.4, 600 mV for each differential line, 100 ohm
input impedance per differential pair
• DisplayPort 1.2, 600 mV for each differential line, 100
ohm input impedance per differential pair
• USB Type-C, 600mV for each differential line, 90
ohm input impedance per differential pair
AC Input voltage/ frequency/
current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.6A (typical)
Inrush current • 120 V: 30 A (Max.) at 0 °C (cold start)
• 220 V: 60 A (Max.) at 0 °C (cold start)
Physical Characteristics
Model P2219HC P2419HC
Signal cable type • Digital: DisplayPort, 20 pins
• Digital: HDMI, 19 pins
• Digital: USB Type-C, 24 pins
Dimensions (with stand)
Height (extended) 472.04 mm (18.58 inches) 486.11 mm (19.14 inches)
Height (compressed) 353.42 mm (13.91 inches) 356.11 mm (14.02 inches)
Width 487.3 mm (19.19 inches) 537.8 mm (21.17 inches)
Depth 166.0 mm (6.54 inches) 166.0 mm (6.54 inches)
Dimensions (without stand)
Height 293.4 mm (11.55 inches) 322.15 mm (12.68 inches)
Width 487.3 mm (19.19 inches) 537.8 mm (21.17 inches)
Depth 41.3 mm (1.63 inches) 42.8 mm (1.69 inches)
Stand dimensions
Height (extended) 400.80 mm (15.78 inches) 400.80 mm (15.78 inches)
Height (compressed) 353.42 mm (13.91 inches) 353.42 mm (13.91 inches)
Width 206.0 mm (8.11 inches) 206.0 mm (8.11 inches)
Depth 166.0 mm (6.54 inches) 166.0 mm (6.54 inches)
Base 206.0 mm x 166.0 mm
(8.11 inches x 6.54 inches)
206.0 mm x 166.0 mm
(8.11 inches x 6.54 inches)
Weight
Weight with packaging 6.43 kg (14.18 lb) 7.26 kg (16.01 lb)
Weight with stand assembly and
cables
4.99 kg (11,00 lb) 5.45 kg (12.02 lb)
Page: 15
16     | About Your Monitor
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
3.05 kg (6.72 lb) 3.52 kg (7.76 lb)
Weight of stand assembly 1.64 kg (3.62 lb) 1.65 kg (3.63 lb)
Front frame gloss 2-4 (only front chin) 2-4 (only front chin)
Model P2719HC
Signal cable type • Digital: DisplayPort, 20 pins
• Digital: HDMI, 19 pins
• Digital: USB Type-C, 24 pins
Dimensions (with stand)
Height (extended) 524.3 mm (20.64 inches)
Height (compressed) 394.3 mm (15.52 inches)
Width 609.9 mm (24.01 inches)
Depth 185.0 mm (7.28 inches)
Dimensions (without stand)
Height 363.0 mm (14.29 inches)
Width 609.9 mm (24.01 inches)
Depth 42.8 mm (1.69 inches)
Stand dimensions
Height (extended) 418.4 mm (16.47 inches)
Height (compressed) 371.0 mm (14.61 inches)
Width 245.0 mm (9.65 inches)
Depth 185.0 mm (7.28 inches)
Base 245.0 mm x 185.0 mm (9.65 inches x 7.28 inches)
Weight
Weight with packaging 9.36 kg (20.64 lb)
Weight with stand assembly and
cables
6.94 kg (15.30 lb)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
4.67 kg (10.30 lb)
Weight of stand assembly 1.93 kg (4.25 lb)
Front frame gloss 2-4 (only front chin)
Page: 16
About Your Monitor |     17
Environmental Characteristics
Model P2219HC P2419HC
Temperature
Operating 0°C to 40°C (32°F to 104°F)
Non-operating • Storage: -20 °C to 60 °C (-4 °F to 140 °F)
• Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
Operating 20% to 80% (non-condensing)
Non-operating • Storage: 10% to 90% (non-condensing)
• Shipping: 10% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal dissipation • 403 BTU/hour
(maximum)
• 58 BTU/hour (typical)
• 407 BTU/hour
(maximum)
• 62 BTU/hour (typical)
Model P2719HC
Temperature
Operating 0°C to 40°C (32°F to 104°F)
Non-operating • Storage: -20 °C to 60 °C (-4 °F to 140 °F)
• Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
Operating 20% to 80% (non-condensing)
Non-operating • Storage: 10% to 90% (non-condensing)
• Shipping: 10% to 90% (non-condensing)
Altitude
Operating 5,000 m (16,404 ft) (maximum)
Non-operating 12,192 m (40,000 ft) (maximum)
Thermal dissipation • 402.97 BTU/hour (maximum)
• 52.96 BTU/hour (typical)
Page: 17
18     | About Your Monitor
Compliant standards
ENERGY STAR Certified Monitor yes (P2419HC/P2719HC only)
EPEAT EPEAT registered where applicable. EPEAT
registration varies by country. See www.epeat.net for
registration status by country. (P2419HC/P2719HC
only)
TCO Certified Displays yes
RoHS Compliant yes
BFR/PVC free Monitor
(excluding external cables)
yes
Power Management Modes
If you have VESA’s DPM-compliant video card or software installed in your PC, the monitor
can automatically reduce its power consumption when not in use. This is referred to as
power save mode*. If the computer detects input from the keyboard, mouse, or other input
devices, the monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature.
P2219HC
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power Indicator Power Consumption
Normal
operation
Active Active Active White 118 W (maximum)**
17 W (typical)
Active-off
mode
Inactive Inactive Off White
(Glowing)
Less than 0.3 W***
Switch off - - - Off Less than 0.3 W
Power Consumption Pon 15.57 W
Total Energy Consumption (TEC) 50.59 kWh
NOTE:
Pon
: Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
P2419HC
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power Indicator Power Consumption
Normal
operation
Active Active Active White 119 W (maximum)**
18 W (typical)
Active-off
mode
Inactive Inactive Off White
(Glowing)
Less than 0.3 W***
Switch off - - - Off Less than 0.3 W
Page: 18
About Your Monitor |     19
Power Consumption Pon 13.9 W
Total Energy Consumption (TEC) 45.3 kWh
P2719HC
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power Indicator Power Consumption
Normal
operation
Active Active Active White 118.1 W (maximum)**
15.52 W (typical)
Active-off
mode
Inactive Inactive Off White
(Glowing)
Less than 0.3 W***
Switch off - - - Off Less than 0.3 W
Power Consumption Pon 15.5 W
Total Energy Consumption (TEC) 49.7 kWh
NOTE: These monitors P2419HC/P2719HC are ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can be
restored by “Factory Reset” function in the OSD menu. Changing the factory default
settings or enabling other features may increase power consumption that could exceed
the ENERGY STAR specified limit.
NOTE:
Pon
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, the following message is displayed:
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance, and USB active.
***Test data is measured based on no USB Type-C cable attached condition.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise.
No warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.
Page: 19
20     | About Your Monitor
Pin Assignments
HDMI connector
Pin number 19-pin side of the connected signal cable
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5 V POWER
19 HOT PLUG DETECT
Page: 20
About Your Monitor |     21
DP connector (in)
Pin number 20-pin side of the connected signal cable
1 ML3 (n)
2 GND
3 ML3 (p)
4 ML2 (n)
5 GND
6 ML2 (p)
7 ML1 (n)
8 GND
9 ML1 (p)
10 ML0 (n)
11 GND
12 ML0 (p)
13 GND
14 GND
15 AUX (p)
16 GND
17 AUX (n)
18 Hot Plug Detect
19 Re-PWR
20 +3.3 V DP_PWR
Page: 21
22     | About Your Monitor
DP connector (out)
Pin number 20-pin side of the connected signal cable
1 ML0(p)
2 GND
3 ML0(n)
4 ML1(p)
5 GND
6 ML1(n)
7 ML2(p)
8 GND
9 ML2(n)
10 ML3(p)
11 GND
12 ML3(n)
13 CONFIG1
14 CONFIG2
15 AUX CH(p)
16 GND
17 AUX CH(n)
18 Hot Plug Detect
19 Return
20 DP_PWR
Page: 22
About Your Monitor |     23
USB Type-C connector
Pin Signal Pin Signal
A1 GND B12 GND
A2 SSTXp1 B11 SSRXp1
A3 SSTXn1 B10 SSRXn1
A4 VBUS B9 VBUS
A5 CC1 B8 SBU2
A6 Dp1 B7 Dn1
A7 Dn1 B6 Dp1
A8 SBU1 B5 CC2
A9 VBUS B4 VBUS
A10 SSRXn2 B3 SSTXn2
A11 SSRXp2 B2 SSTXp2
A12 GND B1 GND
Page: 23
24     | About Your Monitor
Universal Serial Bus (USB)
This section gives you information about the USB ports that are available on the monitor.
Your computer has the following USB ports:
• 2 downstream - left side USB 3.0
• 2 downstream - bottom side USB 2.0
NOTE: The monitor’s USB ports work only when the monitor is on or in the power save
mode. If you turn off the monitor and then turn it on, the attached peripherals may take
a few seconds to resume normal functionality.
NOTE: This monitor is Super-Speed USB 3.0 and High-Speed USB 2.0 compatible.
USB 3.0
Transfer speed Data rate Power consumption
SuperSpeed 5 Gbps 4.5 W (Max., each port)
Hi-Speed 480 Mbps 4.5 W (Max., each port)
Full speed 12 Mbps 4.5 W (Max., each port)
USB 2.0
Transfer speed Data rate Power consumption
Hi-Speed 480 Mbps 2.5 W (Max., each port)
Full speed 12 Mbps 2.5 W (Max., each port)
Low speed 1.5 Mbps 2.5 W (Max., each port)
Page: 24
About Your Monitor |     25
USB 2.0 port USB 3.0 port
Pin number Signal name Pin number Signal name
1 VCC 1 VBUS
2 DMD 2 D-
3 DPD 3 D+
4 GND 4 GND
5 StdA_SSRX-
6 StdA_SSRX+
7 GND_DRAIN
8 StdA_SSTX-
9 StdA_SSTX+
Shell Shield
Page: 25
26     | About Your Monitor
Plug-and-Play
You can install the monitor in any Plug-and-Play-compatible system. The monitor
automatically provides the computer system with its extended display identification data
(EDID) using display data channel (DDC) protocols so the computer can configure itself
and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings if desired. For more information about changing the monitor settings, see
Operating the Monitor.
LCD Monitor Quality and Pixel Policy
During the LCD monitor manufacturing process, it is not uncommon for one or more pixels
to become fixed in an unchanging state which are hard to see and do not affect the display
quality or usability. For more information on LCD Monitor Pixel Policy, see Dell support site
at: http://www.dell.com/support/monitors.
Page: 26
Setting Up the Monitor |     27
Setting Up the Monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for attaching the stand that was
shipped with your monitor. If you are attaching a stand that you purchased from any
other source, follow the set up instructions that were included with the stand.
To attach the monitor stand:
1 Follow the instructions on the flaps of the carton to remove the stand from the top
cushion that secures it.
2 Insert the stand base blocks fully into the stand slot.
3 Lift the screw handle and turn the screw clockwise.
4 After fully tightening the screw, fold the screw handle flat within the recess.
5 Lift the cover, as shown, to expose the VESA area for stand assembly.
Page: 27
28     | Setting Up the Monitor
6 Attach the stand assembly to the monitor.
a.Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor.
b.Press the stand down till it snaps into place.
7 Place the monitor upright.
NOTE: Lift the monitor carefully to prevent it from slipping or falling.
Using the Tilt, Swivel, and Vertical Extension
NOTE: This is applicable for a monitor with a stand. If you purchased any other
stand, refer to the respective stand setup guide for set up instructions.
Tilt, Swivel
With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle.
NOTE: The stand is detached when the monitor is shipped from the factory.
Page: 28
Setting Up the Monitor |     29
Vertical Extension
NOTE: The stand extends vertically up to 130 mm. The figure below
illustrates how to extend the stand vertically.
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended
(Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor.
NOTE: To use the Display Rotation function (Landscape versus Portrait view)
with your Dell computer, you require an updated graphics driver that is not
included with this monitor. To download the graphics driver,
go to www.dell.com/support and see the download section for Video
Drivers for latest driver updates.
NOTE: When in the Portrait View Mode, you may experience performance
degradation in graphic-intensive applications (3D Gaming and etc.).
Page: 29
30     | Setting Up the Monitor
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the
graphics driver website or your computer manufacturer website for information on
rotating the ’contents’ on your display.
To adjust the Rotation Display Settings:
1 Right-click on the desktop and click Properties.
2 Select the Settings tab and click Advanced.
3 If you have an ATI graphics card, select the Rotation tab and set the preferred
rotation.
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
If you have an Intel® graphics card, select the Intel graphics tab, click Graphic
Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to
www.dell.com/support and download the latest driver for your graphics card.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
To connect your monitor to the computer:
1 Turn off your computer.
2 Connect the HDMI, DP or USB Type-C cable from your monitor to the computer.
3 Switch on your monitor.
4 Select the correct input source at Monitor OSD Menu and turn on your
computer.
Connecting the HDMI cable (optional)
Page: 30
Setting Up the Monitor |     31
Connecting the DisplayPort cable
Connecting the monitor for DP Multi-Stream Transport (MST) function (optional)
NOTE: Supports the DP MST feature. To make use of this feature, your PC
Graphics Card must be certified to DP1.2 with MST option.
NOTE: Remove the rubber plug when using the DP out connector.
NOTE: When DP in and DP out is connected to a PC and second monitor respectively
for the first time, MST will be automatically enabled.
Connecting the USB Type-C cable
Page: 31
32     | Setting Up the Monitor
NOTE:
1 USB Type-C Alternate mode with DP 1.2, DP 1.1 is not supported.
2 Supports USB PD (Power Delivery) profiles up to 65W(20V/3.25A).
3 If your computer requires >65W(20V/3.25A) to operate and the battery is drained, it
may not power up or charge with P2219HC/P2419HC/P2719HC USB Type-C PD.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (see Connecting Your
Monitor for cable attachment) organize all cables as shown above.
Page: 32
Setting Up the Monitor |     33
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen while removing the
stand, make sure that the monitor is placed on a soft, clean surface.
NOTE: The procedure below is applicable for the default stand. If you purchased any
other stand, see the documentation shipped with the stand to set it up.
To remove the stand:
1 Place the monitor on a soft cloth or cushion.
2 Press and hold the stand-release button.
3 Lift the stand up and away from the monitor.
Page: 33
34     | Setting Up the Monitor
Wall Mounting (Optional)
NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1 Place the monitor on a soft cloth or cushion on a stable, flat table.
2 Remove the stand.
3 Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4 Attach the mounting bracket from the wall mounting kit to the monitor.
5 Mount the monitor on the wall by following the instructions that comes with the
wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum
weight/load bearing capacity of 3.05 kg (P2219HC)/3.52 kg (P2419HC)/4.67 kg
(P2719HC).
Page: 34
Operating the Monitor |     35
Operating the Monitor
Turning on the Monitor
Press the button to turn on the monitor.
Using the Front Panel Controls
Use the control buttons on the front of the monitor to adjust the characteristics of the
image being displayed. As you use these buttons to adjust the controls, an OSD shows the
numeric values of the characteristics as they change.
Page: 35
36     | Operating the Monitor
The following table describes the front panel buttons:
Front‑Panel Button Description
1
Shortcut key:
Preset Modes
Use this button to choose from a list of preset
color modes.
2
Shortcut key:
Brightness/Contrast
Use this button to directly access the “Brightness/
Contrast” bar.
3
Menu
Use this menu button to launch the on-screen display
(OSD) and select the OSD menu.
See Accessing the Menu System.
4
Exit
Use this button to go back to the main menu or exit the
OSD main menu.
5
Power (with power light
indicator)
Use the Power button to turn the monitor On and Off.
The white LED indicates the monitor is On and fully
functional.
A glowing white LED indicates DPMS Power Save
Mode.
Page: 36
Operating the Monitor |     37
Front‑Panel Button
Use the buttons on the front of the monitor to adjust the image settings.
Front Panel Button Description
1
Up Down
Use the Up (increase) and Down (decrease) keys to adjust
items in the OSD menu.
2
OK
Use the OK button to confirm your selection.
3
Back
Use the Back button to go back to the previous menu.
Page: 37
38     | Operating the Monitor
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: Any changes you make using the OSD menu are automatically saved if
you move to another OSD menu, exit the OSD menu, or wait for the OSD menu
to disappear.
1 Press the button to launch the OSD menu and display the main menu.
2 Press the and buttons to move between options. As you move from one
icon to another, the option name is highlighted.
3 Press the or or button once to activate the highlighted option.
4 Press the and buttons to select the desired parameter.
5 Press to enter the slide bar and then use the or button, according to the
indicators on the menu, to make your changes.
6 Select the to return to previous menu or to accept and return to previous
menu.
Page: 38
Operating the Monitor |     39
Icon Menu and
Submenus
Description
Brightness/
Contrast
Use this menu to activate Brightness/Contrast adjustment.
Brightness Brightness adjusts the luminance of the backlight
(minimum 0; maximum 100).
Press the button to increase brightness.
Press the button to decrease brightness.
NOTE: Manual adjustment of Brightness is disabled when
Dynamic Contrast is switched on.
Contrast Adjust the Brightness first, and then adjust Contrast only if
further adjustment is necessary.
Press the button to increase contrast and press the
button to decrease contrast (between 0 and 100).
Contrast adjusts the difference between darkness and lightness
on the monitor.
Page: 39
40     | Operating the Monitor
Icon Menu and
Submenus
Description
Input Source Use the Input Source menu to select between different
video inputs that are connected to your monitor.
USB Type-C Select the USB Type-C input when you are using the USB
Type-C connector.
Use to select the USB Type-C input source.
DP Select the DP input when you are using the DP connector.
Use to select the DP input source.
HDMI Select the HDMI input when you are using the HDMI connector.
Use to select the HDMI input source.
Auto Select Use to select Auto Select. the monitor scans for available
input sources.
Auto Select
for USB-C
Allows you to set Auto Select for USB Type-C to:
• Prompt for Multiple Inputs : Always show Switch to USB
Type-C Video Input message for user to choose whether to
switch or not.
• Yes: The monitor always switches to USB Type-C video without
asking while USB Type-C is connected.
• No: The monitor will NOT auto switch to USB Type-C video
from another available input.
Reset Input
Source
Resets your monitor’s Input Source settings to the factory
defaults.
Page: 40
Operating the Monitor |     41
Icon Menu and
Submenus
Description
Color Use the Color menu to adjust the color setting mode.
Page: 41
42     | Operating the Monitor
Icon Menu and
Submenus
Description
Preset Modes When you select Preset Modes, you can choose Standard,
ComfortView, Movie, Game, Warm, Cool or Custom Color from
the list.
• Standard: Default color settings. This is the default preset
mode.
• ComfortView: Decreases the level of blue light emitted from
the screen to make viewing more comfortable for your eyes.
NOTE: To reduce the risk of eye strain and neck/arm/back/
shoulders pain from using the monitor for long periods of time,
we suggest you to :
• Set the screen about 20 to 28 inches (50-70 cm) from your
eyes.
• Blink frequently to moisten or rewet your eyes when working
with the monitor.
• Take regular and frequent breaks for 20 minutes every two
hours.
• Look away from your monitor and gaze at a distant object at
20 feet away for at least 20 seconds during the breaks.
• Perform stretches to relieve tension in the neck/arm/back/
shoulders during the breaks.
• Movie: Loads color settings ideal for movies.
• Game: Loads color settings ideal for most gaming applications.
• Warm: Increases the color temperature. The screen appears
warmer with a red/yellow tint.
• Cool: Decreases the color temperature. The screen appears
cooler with a blue tint.
• Custom Color: Allows you to manually adjust the color settings.
Press the and buttons to adjust the Red, Green, and
Blue values and create your own preset color mode.
Page: 42
Operating the Monitor |     43
Icon Menu and
Submenus
Description
Input Color
Format
Allows you to set the video input mode to:
• RGB: Select this option if your monitor is connected to a
computer (or DVD player) using the HDMI cable.
• YPbPr: Select this option if your DVD player supports only
YPbPr output.
Hue Use or to adjust the hue from 0 to 100.
NOTE: Hue adjustment is available only for Movie and Game
mode.
Saturation Use or to adjust the saturation from 0 to 100.
NOTE: Saturation adjustment is available only for Movie and
Game modes.
Reset Color Resets your monitor’s color settings to the factory defaults.
Page: 43
44     | Operating the Monitor
Icon Menu and
Submenus
Description
Display Use the Display menu to adjust image.
Aspect Ratio Adjust the image ratio to Wide 16:9, 4:3 or 5:4.
Sharpness Makes the image look sharper or softer.
Use or to adjust the sharpness from ‘0’ to ‘100’.
Dynamic
Contrast
Allows you to increase the level of contrast to provide sharper
and more detailed image quality.
Push the button to select the Dynamic Contrast “On”
or “Off”.
NOTE: For Game and Movie preset mode only.
NOTE: Dynamic Contrast provides higher contrast if you select
Game or Movie preset mode.
Response
Time
Allows you to set the Response Time to Normal or Fast.
MST DP Multi Stream Transport, Set to ON enables MST(DP out),
Set to OFF disables MST function.
NOTE: When DP/USB Type-C upstream cable and DP
downstream cable is connected, monitor will set MST = ON
automatically, this action will only be done once after Factory
Reset or Display Reset.
Reset Display Restores the display settings to factory defaults.
Page: 44
Operating the Monitor |     45
Icon Menu and
Submenus
Description
Menu Select this option to adjust the settings of the OSD, such as the
languages of the OSD, the amount of time the menu remains on
screen, and so on.
Language Set the OSD display to one of eight languages.
(English, Spanish, French, German, Brazilian Portuguese, Russian,
Simplified Chinese, or Japanese).
Rotation Rotates the OSD by 0/90/270 degrees.
You can adjust the menu according to your display rotation.
Transparency Select this option to change the menu transparency by using
and (min. 0% / max. 100%).
Timer OSD Hold Time: Sets the length of time the OSD remains active
after you press a button.
Use the and buttons to adjust the slider in 1-second
increments, from 5 to 60 seconds.
Reset Menu Restore the menu settings to factory defaults.
Page: 45
46     | Operating the Monitor
Icon Menu and
Submenus
Description
Personalize
Shortcut
key 1
Select from Preset Modes, Brightness/Contrast, Input
Source, Aspect Ratio, Rotation set as shortcut key 1.
Shortcut
key 2
Select from Preset Modes, Brightness/Contrast, Input
Source, Aspect Ratio, Rotation set as shortcut key 2.
Power Button
LED
Allows you to set the state of the power light to save energy.
USB-A
Charging
Allows you to enable or disable USB Type-A (Downstream Ports)
charging function during monitor standby mode.
NOTE: This option is only available when the USB Type-C
(Upstream Port) cable is unplugged. If the USB Type-C cable is
connected, USB-A Charging follows the USB host power status
and the option is not accessible.
NOTE: This option was previously called “USB” in older monitor
firmware revisions.
USB-C
Charging
Allows you to enable or disable Always On USB Type-C Charging
function during monitor Power Off mode.
NOTE: This option is only available in newer monitor
firmware revisions. See Always On USB Type-C Charging for
troubleshooting.
Reset
Persona-
lization
Restores Shortcut Keys and Power Button LED to factory
defaults.
Page: 46
Operating the Monitor |     47
Icon Menu and
Submenus
Description
Other P2219HC
P2419HC/P2719HC
Select this option to adjust the OSD settings such as the
DDC/CI, LCD conditioning, and so on.
Display info Displays the monitor’s current settings.
Page: 47
48     | Operating the Monitor
Icon Menu and
Submenus
Description
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows you
to adjust the monitor settings using software on your computer.
Select Off to turn off this feature.
Enable this feature for best user experience and optimum
performance of your monitor.
LCD
Conditioning
Helps reduce minor cases of image retention. Depending on the
degree of image retention, the program may take some time to
run. Select On to start the process.
Page: 48
Operating the Monitor |     49
Icon Menu and
Submenus
Description
Firmware Firmware version.
Service Tag Displays the Service Tag. The Service Tag is a unique
alphanumeric identifier that allows Dell to identify the product
specifications and access warranty information.
NOTE: The Service Tag is also printed on a label located at the
back of the cover.
Reset Others Restores other settings, such as DDC/CI, to factory defaults.
Factory
Reset
P2219HC
Restores all OSD settings to the factory defaults.
P2419HC/P2719HC
Restores all preset values to the factory default settings. These
are also the settings for ENERGY STAR®
tests.
Page: 49
50     | Operating the Monitor
OSD Warning Messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie),
manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, you can see the following
message:
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges
addressable by this monitor. Recommended mode is 1920 x 1080.
You can see the following message before the DDC/CI function is disabled:
When the monitor enters the Power Save mode, the following message will appear:

Question & answers

There are no questions about the Dell P2419HC yet.

Ask a question about the Dell P2419HC

Have a question about the Dell P2419HC but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell P2419HC. Please make sure that you describe your difficulty with the Dell P2419HC as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.