Dell OptiPlex 9010 manual

View a manual of the Dell OptiPlex 9010 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Desktop
  • Model/name: OptiPlex 9010
  • Filetype: PDF
  • Available languages: Dutch, English

Table of Contents

Page: 0
TECHNICAL GUIDEBOOK
INSIDE THE OPTIPLEX 9010
TM
TM
DELL
OPTIPLEX 9010
Page: 1
TABLE OF CONTENTS
OVERVIEW
Mini Tower Computer (MT) View 3-4
Desktop Computer (DT) View 5-6
Small Form Factor Computer (SFF) View 7-8
MARKETING SYSTEM CONFIGURATIONS
Operating System, Chipset 11
Processor 12
Memory 13
Drives and Removable Storage, System Board Connectors 14-15
Graphics/Video Controller 16
External Ports/Connectors 16
Communications—Network Adapter (NIC), Wireless 17
Audio and Speakers, Keyboard and Mouse 17
Security, Service and Support, Software 18
DETAILED ENGINEERING SPECIFICATIONS
System Dimensions (Physical) 19
System Board Connector Maximum Allowable Dimensions 19
System Level Environmental and Operating Conditions 20
Power 21-22
Audio 23
Communications 23-28
Graphics/Video Controller 29-31
Hard Drives 32-40
Optical Drive 41-43
BIOS Defaults 45
Chassis Enclosure and Ventilation Requirements 46
Acoustic Noise Emission Information 47-50
Ultra Small Form Factor Computer (USFF) View
9-10
Media Card Reader 44
Page: 2
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
3
MINI TOWER COMPUTER (MT) VIEW
FRONT VIEW
1 Power Button, Power
Light
6 Optical Drive (optional)
2 Optical Drive Bay
(optional)
7 Optical Drive Eject
Button
3 Headphone Connector 8 USB 2.0 Connectors (2)
4 Microphone
Connector
9 Drive Activity Light
5 USB 3.0 Connectors
(2)
BACK VIEW
10 Power Supply
Diagnostic Light
14 Expansion Card Slots
(4)
12 Power Connectors 16 Padlock Ring
13 Back Panel
Connectors
11 Power Supply
Diagnostic Button
15 Kensington / Noble
Security Cable Slot
1
PS2 Mouse
Connector
7
PS2 Keyboard
Connector
2 Link Integrity Light 8 USB2.0 Connectors (2)
3 Network Connector 9
DisplayPort Connector
(2)
4
Network Activity
Light
10
USB2.0 Connectors (2)
USB3.0 Connectors (2)
BACK PANEL CONNECTORS
5 Serial Connector 11 VGA Connector
6 Line-out Connector 12
Line-in/Microphone
Connector
Page: 3
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
4
MT System Board Components
Num-
ber
Name
Num-
ber
Name
1 Internal Speaker Connector (INT_SPKR) 13 PCI-e x16 (wire x4) Connector (SLOT4)
2 Front IO Connector (FRONTPANEL) 14 Buzzer (BEEP)
3 Thermal Sensor Connector (THRM_2) 15 LPC Debug Connector (LPC_DEBUG)
4 SATA 0 Connector (SATA0) 16 Intrusion Switch Connector (INTRUDER)
5 SATA 1 Connector (SATA1) 17 System Fan Connector (FAN_HDD)
6 SATA 2 Connector (SATA2) 18 P2 Power Connector (12V_PWRCONN)
7 SATA 3 Connector (SATA3) 19 Processor Socket (N/A)
8 Internal USB Connector (INT_USB) 20 CPU fan Connector (FAN_CPU)
9 Battery Connector (BATTERY) 21
Memory Connectors (DIMM1, DIMM2,
DIMM3, DIMM4)
10 PCI-e x16 Connector (SLOT1) 22 Power Switch Connector (PWR_SW)
11 PCI-e x1 Connector (SLOT2) 23 P1 Power Connector (POWER)
12 PCI Connector (SLOT3) 24 Front USB3.0 Connector (Front _USB )
Page: 4
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
5
DESKTOP COMPUTER (DT) VIEW
BACK VIEW
9 Padlock Ring 13
Expansion Card Slots
(4)
10
Kensington / Noble
Security Cable Slot
14
Power Supply
Diagnostic Light
11 Power Connectors 15
Power Supply
Diagnostic Button
12
Back Panel Connect-
ors
FRONT VIEW
1 Optical Drive 5 USB 3.0 Connectors (2)
2
Optical Drive Eject
Button
6 Microphone Connector
3
Power Button, Power
Light
7 Headphone Connector
4 USB 2.0 Connectors (2) 8 Drive Activity Light
1 PS2 Mouse
Connector
7 PS2 Keyboard
Connector
2 Link Integrity Light 8 USB2.0 Connectors (2)
3 Network Connector 9 DisplayPort Connector
(2)
4 Network Activity
Light
10 USB2.0 Connectors (2)
USB3.0 Connectors (2)
BACK PANEL CONNECTORS
5 Serial Connector 11 VGA Connector
6 Line-out Connector 12 Line-in/Microphone
Connector
Page: 5
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
6
DT System Board Components
Num-
ber
Name
Num-
ber
Name
1 Internal Speaker Connector (INT_SPKR) 12 PCI-ex 16 (wire x4) Connector (SLOT4)
2 Front IO Connector (FRONTPANEL) 13 Buzzer (BEEP)
3 Thermal Sensor Connector (THRM_2) 14 LPC Debug Connector (LPC_DEBUG)
4 SATA 0 Connector (SATA0) 15 Intrusion Switch Connector (INTRUDER)
5 SATA 1 Connector (SATA1) 16 System Fan Connector (FAN_HDD)
6 SATA 2 Connector (SATA2) 17 P2 Power Connector (12V_PWRCONN)
7 Internal USB Connector (INT_USB) 18 Processor Socket (N/A)
8 Battery Connector (BATTERY) 19 CPU fan Connector (FAN_CPU)
9 PCI-e x16 Connector (SLOT1) 20
Memory Connectors (DIMM1, DIMM2,
DIMM3, DIMM4)
10 PCI-e x1 Connector (SLOT2) 21 Power Switch Connector (PWR_SW)
11 PCI Connector (SLOT3) 22 P1 Power Connector (POWER)
23 Front USB3.0 Connector (Front _USB )
Page: 6
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
7
SMALL FORM FACTOR COMPUTER (SFF) VIEW
FRONT VIEW
1 Optical Drive 5 USB 3.0 Connectors (2)
2 Optical Drive Eject
Button
6 Microphone Connector
3 Power Button, Power
Light
7 Headphone Connector
4 USB 2.0 Connectors (2) 8 Drive Activity Light
BACK VIEW
9 Padlock Ring 13 Power Supply
Diagnostic Light
10 Kensington / Noble
Security Cable Slot
14 Back Panel
Connectors
11 Power Connectors 15 Expansion Card Slots
(2)
12 Power Supply
Diagnostic Button
1
PS2 Mouse
Connector
7
PS2 Keyboard
Connector
2 Serial Connector 8 VGA Connector
3 Link Integrity Light 9
DisplayPort Connector
(2)
4 Network Connector 10 USB2.0 Connectors (2)
BACK PANEL CONNECTORS
5 Network Activity Light 11
USB2.0 Connectors (2)
USB3.0 Connectors (2)
6 Line-out Connector 12
Line-in/Microphone
Connector
Page: 7
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
8
SFF System Board Components
Number Name Number Name
1 P1 power Connector (POWER) 11 Front IO Connector (FRONTPANEL)
2 System fan Connector (FAN_HDD) 12 Intrusion Switch Connector (INTRUDER)
3 Internal Speaker Connector (INT_SPKR) 13 LPC debug Connector (LPC_DEBUG)
4 Buzzer (BEEP) 14 Battery Connector (BATTERY)
5 PCI-e x16 (wire x4) Connector (SLOT2) 15 P2 Power Connector (12V_PWRCONN)
6 PCI-e x16 Connector (SLOT1) 16 Processor Connector (N/A)
7 Front USB3.0 Connector (Front _USB ) 17 CPU Fan Connector (FAN_CPU)
8 SATA 2 Connector (SATA2) 18 Power Switch Connector (PWR_SW)
9 SATA 1 Connector (SATA1) 19 Memory Connectors (DIMM1, DIMM2,
DIMM3, DIMM4)
10 SATA 0 Connector (SATA0)
Page: 8
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
9
ULTRA SMALL FORM FACTOR COMPUTER (USFF) VIEW
FRONT VIEW
1 Optical Drive 5 Headphone Connector
2 Optical Drive Eject
Button
6 Microphone Connector
3 Power Button, Power
Light
7 USB 3.0 Connectors (2)
4 Drive Activity Light
BACK VIEW
8
Wi-Fi Antenna
(optional)
15
Line-in/ Microphone
Connector
9 Network Activity Light 16
VGA Connector
10 Captive Thumbscrew 17
DisplayPort Connector
(2)
11 Padlock Ring 18 Serial Connector
12
Kensington / Noble
Security Cable Slot
19
USB 3.0 Connectors
(2)
13 Power Connector 20
USB 2.0 Connectors
(2)
14 Line-Out Connector 21 Network Connector
22 Link Integrity Light
Page: 9
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
10
USFF System Board Components
Number Name Number Name
1 Front Panel Connector (FRONTPANEL) 9
HDD-ODD Power Connector
(HDD_ODD_POWER)
2 Memory Connector (DIMM_1,DIMM_2) 10 SATA 1 Connector (SATA1)
3 CPU Fan Connector (FAN_CPU) 11 P1 Power Connector (POWER)
4 Internal Speaker Connector (INT_SPKR) 12 SATA 0 Connector (SATA0)
5 Front IO Connector (F_USB_AUDIO) 13
Intrusion Switch Connector
(INTRUDER)
6 System Fan Connector (FAN_HDD) 14 LPC Debug Connector (LPC_DEBUG)
7 Mini-PCI Socket (PCIE_MINICARD) 15 P2 Power Connector (12V_PWRCONN)
8 Front USB3.0 connector (Front USB) 16 Processor socket (N/A)
17 Battery Connector (BATTERY)
Page: 10
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
11
MARKETING SYSTEM CONFIGURATIONS
NOTE: Offerings may vary by country. For more information regarding the configuration of your computer, click
Start>Help and Support and select the option to view information about your computer.
OPERATING SYSTEM
MT DT SFF USFF
Windows Operating System
Microsoft® Windows 7® Home Basic SP1 (32 and 64 bit),
Microsoft® Windows 7® Home Premium SP1 (32 and 64 bit),
Microsoft® Windows 7® Home Premium w/MUI SP1 (32 and 64 bit),
Microsoft® Windows 7® Professional w/MUI SP1 (32 and 64 bit),
Microsoft® Windows 7® Professional SP1 (32 and 64 bit),
Microsoft® Windows 7® Ultimate SPI (32 and 64 bit),
Other
Ubuntu (N-Series DIB) (32bit)
Ubuntu (32bit)
OS Media Support Optional
CHIPSET
MT DT SFF USFF
Chipset Intel Q77 Express Chipset
Non-volatile memory on chipset
BIOS Configuration SPI (Serial Peripheral Interface) 64Mbit (8MB) &32Mbit(4MB) located at SPI_FLASH on chipset
TPM 1.2 Security Device (Trusted Platform Module)1
4KB located at TPM1.2 on chipset
Non-TPM Available in select countries
NIC EEPROM
LOM configuration contained within SPI_FLASH – no dedicated
LOM EEPROM
Page: 11
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
12
PROCESSOR1
NOTE: Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchro-
nized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to
reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies
to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors identi-
fied below will be made available to Dell customers.
NOTE: Processor numbers are not a measure of performance. Processor availability subject to change and may vary by region/
MT DT SFF USFF
Intel® Quad Core Processors
Intel® Core™ i7 3770 / 3.40GHz, 8M, VT-x, VT-d, TXT (vPro™), 77W GSP GSP GSP
Intel® Core™ i7 3770S / 3.10GHz, 8M, VT-x, VT-d, TXT (vPro™), 65W GSP
Intel® Core™ i5 3570 / 3.40GHz, 6M, VT-x, VT-d, TXT (vPro™), 77W2
GSP GSP GSP
Intel® Core™ i5 3570S / 3.10GHz, 6M, VT-x, VT-d, TXT (vPro™), 65W2
GSP
Intel® Core™ i5 3470 / 3.20GHz, 6M, VT-x, VT-d, TXT (vPro™), 77W2
GSP GSP GSP
Intel® Core™ i5 3475S / 2.90GHz, 6M, VT-x, VT-d, TXT (vPro™), 65W2
GSP GSP GSP GSP
Intel® Core™ i5 3470S / 2.90GHz, 6M, VT-x, VT-d, TXT (vPro™), 65W2
GSP
Intel® Core™ i5 3550 / 3.30GHz, 6M, VT-x, VT-d, TXT (vPro™), 77W3
X X X
Intel® Core™ i5 3550S / 3.00GHz, 6M, VT-x, VT-d, TXT (vPro™), 65W3
X
Intel® Core™ i5 3450 / 3.10GHz, 6M, 77W3
X X X
Intel® Core™ i5 3450S / 2.80GHz, 6M, 65W3
X
Intel® Dual Core Processors
Intel® Core™ i3-3240 / 3.4GHz, 3M, VT-x, 55W2
X X X X
Intel® Core™ i3 3225, / 3.3GHz, 3M, VT-x, 55W2
X X X X
Intel® Core™ G630 / 2.7GHz, 3M, VT-x, 65W3
X X X X
Intel® Core™ G640 / 2.8GHz, 3M, VT-x, 65W2
X X X X
Intel® Core™ G850 / 2.9GHz, 3M, VT-x, 65W3
X X X X
Intel® Core™ G860 / 3.0GHz, 3M, VT-x, 65W2
X X X X
Intel® Core™ i3 2120 / 3.30GHz, 3M, VT-x, 65W3
X X X X
Intel® Core™ i3 2125 / 3.30GHz, 3M, VT-x, 65W3
X X X X
Intel® Core™ i3 2130 / 3.40GHz, 3M, VT-x, 65W3
X X X X
Intel® Core™ i3 3220, / 3.3GHz, 3M, VT-x, 55W2
X X X X
1
3rd generation CPUs natively support 3 displays with the integrated CPU graphics. 2 of the displays must be DP and connected to onboard DP
through DP cables, the other could be any other format. One of the DP port has a maximum resolution of 2500x1600 at 60Hz refresh rate and
the other DP and VGA port have max resolutions of 1920x1200 at 60Hz refresh rates. AcƟve dongles must be used to connect non DP displays to
the 2 onboard DP ports.
2
Post launch CPU, available from June for G860; July for G640, i5 3470/S, i5 3570/S, i5 3475S; September for i3 3220, i3 3225, i3 3240
3
Available at launch, will be replaced in July or September, i5 3470/S replace i5 3450/S; i5 3570/S replace i5 3550/S; i3 3220 replace i3 2120; i3
3225 replace i3 2125;i3 3240 replace i3 2130;G860 replace G850;G640 replace G630.
Page: 12
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
13
MEMORY
NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire
memory range is available to 64-bit operating systems.
MT DT SFF USFF
Type: DDR3 Synch DRAM Non-ECC Memory 1600MHz2
DIMM Slots 4 4 4 2
DIMM Capacities Up to 8GB Up to 8GB Up to 8GB Up to 8GB
Minimum Memory 2GB 2GB 2GB 2GB
Maximum System Memory 32GB1
32GB1
32GB1
16GB1
Memory configurations
32GB1
DDR3, 1600MHz2
, (4 x 8GB) X X X
16GB1
DDR3, 1600MHz2
, (4 x 4GB) X X X
8GB1
DDR3, 1600 MHz2
, (2 x 4GB) X X X X
6GB1
DDR3, 1600MHz2
, ( 2GB + 4GB) X X X X
4GB1
DDR3, 1600MHz2
, (2 x 2GB) X X X X
4GB1
DDR3, 1600MHz2
, (1 DIMM) X X X X
2GB DDR3, 1600MHz2
, (1 DIMM) X X X X
16GB1
DDR3, 1600MHz2
, (2 x 8 GB) X
1
To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system. With 32-bit OS, the total amount of
available memory will be less than 4GB. The amount less depends on the actual system configuration.
2
1600MHz memory will only perform as 1600MHz memory when 3rd generation CPUs are used. It will perform as 1333MHz memory if 2nd
generation i3 2130, i3 2125, i3 2120, G860, G850 CPUs are installed in the system. It will perform as 1066MHz memory if 2nd generation G640,
G630 CPUs are installed in the system.
Page: 13
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
14
DRIVES AND REMOVABLE STORAGE
MT DT SFF USFF
Bays:
5.25-inch Optical Bay Supported (External) 2 1 1 1
Optical Drives Supported (maximum) 2 1 1 (slim-line) 1 (slim-line)
Hard Drive Bay Supported (Internal) 2 1 1 1
Hard Drives Supported 3.5”/2.5” (maximum) 2/2 1/2 1/2 0/1
Interface:
SATA 2.0 2 1 1 0
SATA 3.0 2 2 2 2
3.5” Hard Drives:
1TB1
SATA 7200 RPM HDD X X X
500GB1
SATA 7200 RPM HDD X X X
250GB1
SATA 7200 RPM HDD X X X
2.5” Hard Drives:
500GB1
SATA 7200 RPM HDD X X X X
320GB1
SATA 7200 RPM HDD X X X X
320GB1
SATA 7200 RPM OPAL SED w/FIPS HDD X X X X
500GB1
SATA 7200 RPM Hybrid HDD X X X X
128GB1
SATA Solid State drive X X X X
RAID 1 Data Protection: (includes two matching capacity/speed hard drives)
1TB1
SATA 7200 RPM HDD (3.5”) X
500GB1
SATA 7200 RPM HDD (3.5”) X
250GB1
SATA 7200 RPM HDD (3.5”) X
500GB1
SATA 7200 RPM HDD (2.5”) X X X
320GB1
SATA 7200 RPM HDD (2.5”) X X X
500GB1
SATA 7200 RPM Hybrid HDD (2.5”) X X X
250GB1
SATA 1000 RPM HDD X X X
250GB1
SATA 10000 RPM HDD (3.5”) X
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
Page: 14
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
15
DRIVES AND REMOVABLE STORAGE
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
4
Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and requires a slim line optical drive.
SYSTEM BOARD CONNECTORS
NOTE: See Detailed Engineering Specifications for maximum card dimensions.
MT DT SFF USFF
PCI Slot(s) 1
1 1
PCIe x16 Slot(s) 2
1 1 1
PCIe x16 (wired x4)Slot(s) 3
1 1 1
PCIe x1 Slot(s) 3
1 1
Serial ATA (SATA) 4
4 3 3 2
miniPCIe connector(s) 3
1
MT DT SFF USFF
RAID 0 Performance: (includes two matching capacity/speed hard drives)
1TB1
SATA 7200 RPM HDD (3.5”) X
500GB1
SATA 7200 RPM HDD (3.5”) X
250GB1
SATA 7200 RPM HDD (3.5”) X
500GB1
SATA 7200 RPM HDD (2.5”) X X X
320GB1
SATA 7200 RPM HDD (2.5”) X X X
500GB1
SATA 7200 RPM Hybrid HDD (2.5”) X X X
Optical Drive: (SFF/USFF require slim-line optical drive)
Blu-ray Writer SATA X X X X
DVD+/-RW2
SATA X X X X
DVD-ROM3
SATA X X X X
Media Card Reader:
Dell 19 in 1 Media Card Reader4
X X
1
PCI Slots (Support Standard Rev 2.3)
2
PCIe x16 Slots (Support Standard Rev 3.0)
3
PCIe x16 (wired x 4), PCIe x1 Slots, miniPCIe (Support Standard Rev 2.0)
4
Serial ATA ( 2 ports Support Standard Rev 3.0, the rest of ports Support Standard Rev 2.0)
Page: 15
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
16
GRAPHICS/VIDEO CONTROLLER
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
EXTERNAL PORTS/CONNECTORS
MT DT SFF USFF
Integrated Intel® HD Graphics 2500/4000 (3rd
generation Core
i3/i5/i7 CPUs);
Integrated Intel® HD Graphics 2000/3000 (2nd
generation Core
i3 CPUs);
Integrated Intel® HD Graphics (Pentium® Dual Core CPU);
Integrated on CPU
Enhanced Graphic/Video Options
1GB AMD RADEON HD 7570 Optional card
1GB AMD RADEON HD 7470 Optional card
1GB NVIDIA GEFORCE™ GT640 1 Optional
card
1
GT640 available in June 2012
MT DT SFF USFF
USB 2.0 (Front/Rear/Internal) 2/4/2 0/2/0
USB 3.0 (Front/Rear/Internal) 2/2/0
Serial 1 Rear
Network Connector (RJ-45) 1 Rear
PS/2 2 Rear
1394a Controller via optional PCI card
Optional FH
card
Optional LP
card
Video:
VGA 1 Rear
DisplayPort 2 Rear
Audio:
Line in for microphone 1 Front
Line in for microphone or stereo 1 Rear
Line out for headphones or speakers 1 Front, 1 Rear
2/4/2 2/4/0
2/2/0 2/2/0 2/2/0
Page: 16
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
17
MT DT SFF USFF
Intel® 82579LM Gigabit1
Ethernet LAN 10/100/1000 (Remote
Wake Up, PXE support and Intel Active Management Technol-
ogy support)
Integrated on system board
Broadcom NetXtreme 10/100/1000 PCIe Gigabit Networking
Card
Optional card
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and
network infrastructure is required.
MT DT SFF USFF
Dell Wireless 1530 PCIe WLAN card (802.11n) Optional card
Dell Wireless 1530 half miniPCIe WLAN card (802.11n) Optional
COMMUNICATIONS – WIRELESS
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
MT DT SFF USFF
Realtek ALC269Q High Definition Audio Codec Integrated on system board
Dell AX210 USB Stereo speakers Optional
Dell AX510/AX510PA Flat Panel Soundbar Speakers Optional
AUDIO AND SPEAKERS
KEYBOARD AND MOUSE
COMMUNICATIONS - NETWORK ADAPTER (NIC)
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
MT DT SFF USFF
Dell USB Entry Keyboard with optional palmrest Optional
Dell Multimedia Pro Keyboard Optional
Dell Smart Card Keyboard Optional
Dell USB Optical Mouse Optional
Dell Laser Mouse Optional
Page: 17
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
18
SECURITY
SERVICE AND SUPPORT
NOTE: For more details on Dell Service Plans please to go to: www.dell.com/service/service_plans
SOFTWARE
MT DT SFF USFF
Trusted Platform Module (TPM) 1.21
Integrated on system board
Chassis Intrusion Switch Optional
Dell Smartcard Keyboard Optional
Chassis lock slot and loop support Standard
Dell Data Protection | Hardware Encryption Engine Optional
1
TPM is not available in all countries. Depending on your country regulations, no-TPM system may be available.
MT DT SFF USFF
3 Year Warranty1
Next Business Day On-site2
(3-3-3) Standard
ProSupport Optional
1
For a copy of our guarantees or limited warranties, please write Dell USA L.P., Attn: Warranties, One Dell Way, Round Rock, TX 78682. For more
information, visit www.dell.com/warranty.
2
Service may be provided by third-party. Technician will be dispatched if necessary following phone-based troubleshooting. Subject to parts
availability, geographical restrictions and terms of service contract. Service timing dependent upon time of day call placed to Dell. U.S. only.
MT DT SFF USFF
Dell Client Manager Available via Dell.com
Dell Data Protection | Access (DDPA) Standard
Dell Data Protection | Encryption (DDPE) Optional
ENVIRONMENTAL
NOTE: For more details on Dell Environmental features, please to go to Environmental Attributes section. See
your specific region for availability.
MT DT SFF USFF
Sustainable packaging X
BFR/PVC—free limited configurations
Select coun-
tries only
MultiPack packaging Optional, US only
Energy Efficient Power Supply Optional Standard
X X
ALL-IN-ONE STANDS AND MOUNTS
MT DT SFF USFF
Small Form Factor AIO Stand Optional
Ultra Small Form Factor AIO Stand Optional
Ultra Small Form Factor Wall Mount / Desk Mount Optional
Page: 18
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
19
DETAILED ENGINEERING SPECIFICATIONS
SYSTEM DIMENSIONS (PHYSICAL)
NOTE: System Weight and Shipping Weight is based on a typical configuration and may vary based on PC
configuration. A typical configuration includes: integrated graphics, one hard drive, one optical drive.
SYSTEM BOARD CONNECTOR MAXIMUM ALLOWABLE DIMENSIONS
MT DT SFF USFF
Chassis Volume (liters) 26.27 15.06 8.38 3.70
Chassis Weight (pounds/kilograms) 20.68 / 9.4 17.38 / 7.9 13.2 / 6.0 7.26 / 3.3
Chassis Dimensions: (HxWxD)
Height (inches/centimeters) 14.17 / 36 14.17 / 36 11.42 / 29 9.32 / 23.67
Width (inches/centimeters) 6.89 / 17.5 4.02 / 10.2 3.65 / 9.26 2.56 / 6.5
Depth (inches/centimeters) 16.42 / 41.7 16.14 / 41 12.28/31.2 9.44 / 24
Shipping Weight (pounds/kilograms - includes packaging materials) 24.57 / 11.17 20.75 / 9.43 15.82/7.19 9.63 /4.375
Height (inches/centimeters) 21.31/54.13 21.31 / 54.13 19.25/48.90 19.13/48.59
Width (inches/centimeters) 18.75/47.63 18.75/47.63 15.81/40.16 14.38/36.53
Depth (inches/centimeters) 14.09 / 35.79 10.84/27.53 10.19/25.88 9.63/24.46
Packaging Parameters (HxWxD)
MT DT SFF USFF
PCI Slot (Voltage supported 3.3V/5V/12V/-12V) 1 1
Height (inches/centimeters) 4.376 / 11.115 2.731 /6.89
Length (inches/centimeters) 6.6 / 16.765 6.6/16.765
PCIex16 Slot (BLUE) (Voltage supported 3.3V/12V) 1 1 1
Height (inches/centimeters) 4.376 / 11.115 2.731 /6.89 2.731 /6.89
Length (inches/centimeters) 6.6 / 16.765 6.6 /16.765 6.6/16.765
PCIe x1 Slot (Voltage supported 3.3V/12V) 1 1
Height (inches/centimeters) 4.376 / 11.115 2.731 / 6.89
Length (inches/centimeters) 4.5 / 11.44 4.5 / 11.44
PCIex16 wired as x4 Slot (BLACK) (Voltage supported 3.3/12V) 1 1 1
Mini PCIe x1 Slot 1
Length (inches/centimeters) 6.6/ 16.765 6.6 /16.765 6.6 /16.765
Height (inches/centimeters) 4.376 / 11.115 2.731 /6.89 2.731 /6.89
Maximum Wattage 25W 25W
Maximum Wattage 75W 50W 50W
Maximum Wattage 25W 25W 25W
Maximum Wattage 10W 10W
Page: 19
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
20
SYSTEM LEVEL ENVIRONMENTAL AND OPERATING CONDITIONS
MT DT SFF USFF
Temperature
Operating 10°C to 35°C (50°F to 95°F)
Non-Operating (Storage) -40°C to 65°C (-40°F to 149°F)
Relative Humidity 20% to 80% (non-condensing)
Maximum vibration
Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min
Non-Operating 0.5 G at 3 to 200 Hz at 1 octave/min
Maximum Shock
Operating
Bottom half-sine pulse with a change in velocity
of 50.8 cm/sec (20 inches/sec)
Non-Operating
27-G faired square wave with a velocity change
of 508 cm/sec (200 inches/sec)
Operating –15.2 to 3048 m (–50 to 10,000 ft)
Non-Operating –15.2 to 10,668 m (–50 to 35,000 ft)
Maximum Altitude
Page: 20
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
21
POWER
NOTE: These form factors utilize a more efficient Active Power Factor Correction (APFC) power supply. Dell
recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approxima-
tion of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufac-
MT
APFC EPA
DT
APFC EPA
SFF
APFC EPA
USFF
EPA
Power Supply Wattage 275W
275W High
Efficiency
250W
250W High
Efficiency
240W
240W High
Efficiency
200W High
Efficiency
AC input Voltage
Range
90 –
264Vac
90 –
264Vac
90 –
264Vac
90 –
264Vac
90 –
264Vac
90 –
264Vac
90 – 264Vac
AC input current (low
ac range/high AC
range)
5.0A / 2.5A 5.0A / 2.5A 4.4A / 2.2A 4.4A / 2.2A 4.0A / 2.0A 3.6A / 1.8A 2.9A / 1.45A
AC input Frequency 47HZ/63HZ 47HZ/63HZ 47HZ/63HZ 47HZ/63HZ 47HZ/63HZ 47HZ/63HZ 47 – 63 Hz
AC holdup time (80%
load)
16 mini sec 16 mini sec 16 mini sec 16 mini sec 16 mini sec 16 mini sec 16 mini sec
Minimum Efficiency
(Energy Star 5.2 Com-
pliant)
87 – 90 –
87% @ 20
– 50 –
100% load
87 – 90 –
87% @ 20
– 50 –
100% load
87 – 90 –
87% @ 20
– 50 –
100% load
87 – 90 –
87% @ 20 –
50 – 100%
load
Typical Efficiency
(Active PFC)
65% 65% 65% N/A
DC parameters
+3.3V output 10.0A 10.0A 7.0 A 7.0 A 3.5A 3.5A N/A
+5.0V output 13A 13A 15A 15A 11A 11A N/A
+12.0V output
12VA/17A;
12VB/10A
12VA/17A;
12VB/10A
17.8A 17.8A 17A 17A
+12VA -
12.5 A &
+12VB - 6.0
A
Note: +12VB
Rated at
0.4A when in
Standby
Mode.
+5.0V auxiliary output 4.0A 4.0A 4.0 4.0 4.0A 4.0A N/A
-12.0V output 0.5A 0.5A 0.5A 0.5A 0.5A 0.5A 0.1 A
Max total power 275W 275W 250W 250W 240W 240W 200W
Max combined +3.3V /
+5.0V power
100W 100W 90W 90W 60W 60W N/A
Max combined 12.0V
power (note: only if
more than one 12V rail)
240W 240W N/A N/A N/A N/A 200W
BTUs/h (based on PSU
max wattage)
938 BTU 938 BTU 853 BTU 853 BTU 819 BTU 819 BTU 682 BTU
Power Supply Fan 80*25mm 80*25mm
80*20/25m
m
80*20/25m
m
60*25mm 60*25mm N/A
Compliance:
Erp Lot6 Tier 2 0.5watt
requirement
Yes Yes Yes Yes Yes Yes Yes
Blue Angel Compliant Yes Yes Yes Yes Yes Yes Yes
Climate Savers /
80Plus Compliant
No Yes No Yes No Yes Yes
FEMP Standby Power
Compliant
Yes Yes Yes Yes Yes Yes Yes
CECP Compliant No Yes No Yes No Yes Yes
Page: 21
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
22
Brand Type Voltage Composition Life
PANASONIC CR-2032L/
BE
3V Lithium Continuous Discharge Under 15 kΩ Load to 2.5V End-
Voltage.
20°C±2°C: 1183Hrs. or Longer, 1133Hrs.or Longer after 12
months.
MITSUBISHI CR2032 3V Lithium Continuous Discharge Under 15 kΩ Load to 2.0V End-
Voltage.
20°C ±2°C: 1000Hrs. or Longer, 970Hrs. or Longer after 12
months.
0°C ±2°C: 910Hrs. or Longer, 890Hrs. or Longer after 12
months.
3.0v CMOS battery (Type and estimated battery life)
POWER
NOTE: These form factors utilize a more efficient Active Power Factor Correction (APFC) power sup-
ply. Dell recommends only Uninterruptible Power Supplies (UPS) based on Sine Wave output for APFC
PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have ques-
tions, please contact the manufacture to confirm the output type.
Page: 22
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
23
AUDIO
COMMUNICATIONS - INTEGRATED LAN
INTEGRATED REALTEK ALC269Q HIGH DEFINITION AUDIO MT DT SFF USFF
High Definition Stereo support X X X X
Number of channels 2
Number of Bits / Audio resolution 16, 20, and 24-bit resolution
Sampling rate (recording/playback) Support 44.1K/48K/96K/192 kHz sample rates
Signal to Noise Ratio 98 dB DAC outputs, 90 dB for ADC inputs
Analog Audio X X X X
Dolby Digital
THX
Digital out (S/PDIF)
Microphone 40K ohm~60K ohm
Line-In 40K ohm~60K ohm
Line-Out 100~150 ohm
Headphone 1~4 ohm
Internal Speaker Power Rating 2Watt (peak) / 1Watt (average)
Audio Jack Impedance
INTEGRATED INTEL® 82579 GIGABIT1
ETHERNET LAN 10/100/1000 MT DT SFF USFF
External Connector Type RJ45
Data Rates supported 10/100/1000 Mbps
Controller Details
Controller bus architecture
PCIe-based interface for S0 state, SMBus for Sx
low power state
Integrated memory N/A
Data transfer mode (example Bus-Master DMA) N/A
Power consumption (full operation per data rate connection speed) 711mW (Max.)
Power consumption (standby operation) 227mW (Max.)
IEEE standards compliance (example 802.1P) 802.3
Hardware Certifications (example FCC, B, GS mark…) N/A
Boot ROM Support EEPROM (located in SPI)
Network Transfer Mode (example Full Duplex, Half Duplex)
Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
Page: 23
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
24
COMMUNICATIONS - INTEGRATED LAN (CON.)
COMMUNICATIONS – NETWORK ADAPTER (NIC)
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and
network infrastructure is required.
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and
INTEGRATED INTEL® 82579 GIGABIT1
ETHERNET LAN 10/100/1000 (CONT.)
MT DT SFF USFF
Environmental
Operating temperature 0° C to 85° C (32° F to 185° F)
Operating humidity 20% to 80% (non-condensing)
Operating System Driver Support Microsoft Client XP/Vista/Win 7 (32bit/64bit)
Manageability (examples WOL, PXE) WOL, PXE 2.1
Management Capabilities Alerting
Intel® Standard Manageability, 3rd generation
i5/i7 processors with vPro Technology
BROADCOM NETXTREME 10/100/1000
PCIE GIGABIT1
NETWORKING CARD
MT DT SFF USFF
Connector Type RJ45
Data Rates supported 10/100/1000 Mbps Half/Full duplex
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCIe c1.0a x1
Integrated memory 64KBytes RX, 8KBytes TX
Data transfer mode (example Bus-Master DMA) Bus-Master DMA
Power consumption (full operation per data rate connection speed) 2.84W (860mA @ +3.3V)
Power consumption (standby operation) Less than 300mW
IEEE standards compliance (example 802.1P) 802.3, 802.2, 802.3x, 802.1p
Hardware Certifications (example FCC, B, GS mark…) FCC B, VCCI B, CE
Boot ROM Support No
Network Transfer Mode (example Full Duplex, Half Duplex)
Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
10BASE-T (full-duplex) 20 Mbps Max*
100BASE-TX (half-duplex) 100 Mbps Max*
100BASE-TX (full-duplex) 200 MbpsMax*
1000BASE-T (full-duplex) 2000 Mbps Max*
* Depends on the system environment.
Page: 24
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
25
COMMUNICATIONS – NETWORK ADAPTER (NIC) (CONT.)
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network
infrastructure is required.
BROADCOM NETXTREME 10/100/1000
PCIE GIGABIT1
NETWORKING CARD (CONT.)
MT DT SFF USFF
Environmental
Operating temperature 0°C to 55°C (32°F - 131°F)
Operating humidity 5% ~ 85% (non-condensing)
Operating System Driver Support
Microsoft Client XP/Vista/Win 7 (32bit/64bit)
Linux
Manageability (examples WOL, PXE) WOL, PXE2.1, ACPI
Management Capabilities Alerting (example ASF 2.0) None
1394a FIREWIRE PCI ADD-IN CARD
Connector Type IEEE-1394a-2000 (6 pins)
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI 2.3
Chipset LSI
IO Ports IEEE 1394a (FireWire) with a transfer rate of up to 400Mbps
Power Consumption Under 30 mA
Connector 2 IEEE-1394a 6 pins connectors
OS Support Win XP (32bit/64bit), Win Vista (32bit/64bit) and Win 7 (32bit/64bit)
Page: 25
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
26
COMMUNICATIONS – WIRELESS
DELL WIRELESS 1530 PCIE WLAN CARD (802.11N) MT DT SFF USFF
Dell Wireless 1530 PCIe WLAN card (802.11n) Custom WLAN Antenna
Dell Wireless 1530 half miniPCIe WLAN card (802.11n)
Custom WLAN
Antenna
Controller Details
Controller bus architecture
Electrically compatible with the PCI Express Base Specifica-
tion v1.1 (x1 lane) and PCIe v1.0a.
WLAN standards supported 802.11a, 802.11b, 802.11g, 802.11n
802.11b Data Rates supported 11, 5.5, 2, 1 Mbps
802.11a Data Rates supported 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11g Data Rates supported 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
802.11n Data Rates supported
270, 240, 180, 135, 130, 121.5, 120, 117, 108, 104, 90, 81, 78,
65, 60, 58.5, 54, 52, 40.5, 39, 30, 27, 26, 19.5, 13.5, 13, 6.5
Mbps
Encryption
WEP 64-bit and 128-bit,
TKIP, AES-CCMP 128-bit
Operating temperature 0°C –70°C
Operating humidity Max Operating Humidity 85%
Operating System Driver Support Microsoft Client XP/Vista/Win 7 (32bit/64bit)
Page: 26
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
27
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
SERIAL / PARALLEL PORT PCIE ADD-IN CARD MT DT SFF USFF
Connector Type RS-232 and IEEE1284
Data Rates supported 50bps ~115.2Kbps(Serial)&Maximum 1.8MBp(Parallel)
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/ Win 7 (32bit/64bit)
Linux
DOS
Full height Serial / Parallel add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional
COMMUNICATIONS – SERIAL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
SERIAL PORT PCIE ADD-IN CARD MT DT SFF USFF
Connector Type RS-232
Data Rates supported 50bps ~115.2Kbps
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/Win 7 (32bit/64bit)
Linux
DOS
Half height Serial add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional
Page: 27
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
28
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
PARALLEL PORT PCIE ADD-IN CARD MT DT SFF USFF
Connector Type IEEE1284
Data Rates supported Maximum 1.8MBp
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (32bit/64bit)
Linux
DOS
Half height parallel add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional
Page: 28
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
29
GRAPHICS/VIDEO CONTROLLER
NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.
1
Up to 1.7 GB of system memory may be allocated to support integrated graphics, depending on operating system, system memory size and other
factors.
2
3rd generation CPUs natively support 3 displays with the integrated CPU graphics. Three simultaneous display output requires one DP port with a
maximum resolution of 2500x1600 at 60Hz refresh rate and a DP and VGA port with max resolutions of 1920x1200 at 60Hz refresh rates.
3
Display output from both onboard and discrete simultaneously if multi display option in BIOS is enabled and Win 7 OS is used.
4
For dual graphics card configuration in PCIex16 and PCIex16 (wire as 4), BIOS will disable multi display option automatically and display output
only from graphics cards.
Onboard Graphics1,2,3,4
Integrated Intel® HD Graphics 2500/4000 (3rd
generation Core i3/i5/i7
CPUs);
Integrated Intel® HD Graphics 2000/3000 (2nd
generation Core i3 CPUs);
Integrated Intel® HD Graphics (Pentium® Dual Core CPU);
MT DT SFF USFF
Bus Type Integrated
GPU core clock
Gen6 Core Intel® HD Graphics /HD Graphics
2000 @ 850MHz
Gen7 Core Intel® HD Graphics 2500 / 4000 @
650MHz
Frame Buffer Memory (onboard and shared) Size and Speed
Depends on available system memory (Up to
1.7GB with 4GB system Memory)
Overlay Planes Yes
Maximum Color Depth 32 bit
Maximum Vertical Refresh Rate 75 Hz
Multiple Display Support Yes
Operating Systems Graphics/ Video API Support OpenGL 3.1/OpenCLv1.1 /DirectX 11
Supported Resolutions and Max Refresh Rates (Hz) (Note: Analog and/or
digital)
Up to 2560x1600 @ 60Hz (DP)
Up to 1920 x 1200 @ 60 Hz (VGA only)
External Connectors VGA, 2 DisplayPort
DisplayPort DisplayPort
Bus Type DDPC
DisplayPort Audio Support Yes
VGA
Bus Type CRT
VGA Audio Support No
Page: 29
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
30
1GB NVIDIA GEFORCE™ GT640 MT DT SFF
Bus Type (example integrated or PCIe x16) PCIEx16
GPU core clock 950Mhz
Frame Buffer Memory (onboard and shared) Size and Speed 1250Mhz
Maximum power consumption 75W
Overlay Planes Yes
Maximum Color Depth 32bit
Maximum Vertical Refresh Rate 240Hz
Multiple Display Support Yes
Operating Systems Graphics/ Video API Support D3D/OpenGL 4.1/OpenCLv1.1/DirectX11
Supported Resolutions and Max Refresh Rates (Hz) (Note: Analog and/or digital)
Dual-Link DVI: 2560 x 1600, 32-bit color
DisplayPort: 2560 x 1600, 32-bit color
HDMI: 1920 x 1440, 32-bits color
External connectors Display Port, DVI-I, HDMI
Dimensions of full height card inches/centimeters (L x H)
6.6 x 4.7 /
16.764 x 12.0
Dimensions of low profile card inches/centimeters (L x H) NA
Environmental Operating Conditions (Non-Condensing):
Operating Temperature Range 10°C -50°C
Relative Humidity Range 5-90% RH
Altitude Range 0-20,000 ft.
Audio support
Yes (For native DP and HDMI), Able to support audio for
DP to HDMI dongle that support audio pass through.
Page: 30
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
31
1GB AMD RADEON™ HD7570 MT DT SFF
Bus Type (example integrated or PCIe x16) PCIEx16
GPU core clock 650Mhz
Frame Buffer Memory (onboard and shared) Size and Speed 800Mhz
Maximum power consumption 50W
Overlay Planes Yes
Maximum Color Depth 32-bit
Maximum Vertical Refresh Rate 200Hz
Multiple Display Support Yes
Operating Systems Graphics/ Video API Support D3D/OpenGL 4.1/OpenCLv1.1/DirectX11
Supported Resolutions and Max Refresh Rates (Hz) (Note: Analog and/or digital)
Dual-Link DVI: 2560 x 1600, 32-bit color
DisplayPort: 2560 x 1600, 32-bit color
External connectors Display Port, DVI-I
Dimensions of full height card inches/centimeters (L x H)
6.6 x 4.7 /
16.764 x 12.0
Dimensions of low profile card inches/centimeters (L x H) 6.6 x 3.35 / 16.764 x 8.5
Environmental Operating Conditions (Non-Condensing):
Operating Temperature Range 10°C -55°C
Relative Humidity Range 5-90% RH
Altitude Range 0-20,000 ft.
Audio Support
Yes (For native DP). Able to support audio for DP to
HDMI dongle that support audio pass through.
1GB AMD RADEON™ HD7470 MT DT SFF
Bus Type (example integrated or PCIe x16) PCIEx16
GPU core clock 775Mhz
Frame Buffer Memory (onboard and shared) Size and Speed 900Mhz
Maximum power consumption 25W
Overlay Planes Yes
Maximum Color Depth 32-bit
Maximum Vertical Refresh Rate 200Hz
Multiple Display Support Yes
Operating Systems Graphics/ Video API Support D3D/OpenGL 4.1/OpenCLv1.1/DirectX11
Supported Resolutions and Max Refresh Rates (Hz) (Note: Analog and/or digital)
Dual-Link DVI: 2560 x 1600, 32-bit color
DisplayPort: 2560 x 1600, 32-bit color
External connectors DisplayPort, DVI-I
Dimensions of full height card inches/centimeters (L x H)
6.6 x 4.7 /
16.764 x 12.0
Dimensions of low profile card inches/centimeters (L x H) 6.6 x 3.35 / 16.764 x 8.5
Environmental Operating Conditions (Non-Condensing):
Operating Temperature Range 10°C -55°C
Relative Humidity Range 5-90% RH
Altitude Range 0-20,000 ft.
Audio Support
Yes (For native DP). Able to support audio for DP to
HDMI dongle that support audio pass through.
Page: 31
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
32
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
3.5” 1TB SATA 7200 RPM HDD
Capacity 1TB
Dimensions inches (W x D x H) Approximately (4.00 x 5.787 x 1.028 inches)
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
Internal buffer size 32 MB
Rotational Speed 7200 rpm
Logical Blocks 1,953,525,168
Power Source
Power Consumption (reference only) Idle 5.0W, Active 10.0W(running IOmeter utility)
Spin Up Current (reference only) 5V (1A) ,12V (2A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
Page: 32
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
33
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
(CONT.)
3.5” 500GB SATA 7200 RPM HDD
Capacity 500GB
Dimensions inches (W x D x H) Approximately (4.00 x 5.787 x 1.028 inches)
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
Internal buffer size 16 MB
Rotational Speed 7200 rpm
Logical Blocks 976,773,168
Power Source
Power Consumption (reference only) Idle 5.0W, Active 10.0W(running IOmeter utility)
Spin Up Current (reference only) 5V (1A) ,12V (2A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
Page: 33
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
34
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
(CONT.)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
3.5” 250GB SATA 7200 RPM HDD
Capacity 250GB
Dimensions inches (W x D x H) Approximately (4.00 x 5.787 x 1.028 inches)
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
Internal buffer size 8 MB
Rotational Speed 7200 rpm
Logical Blocks 488,397,168
Power Source
Power Consumption (reference only) Idle 5.0W, Active 10.0W(running IOmeter utility)
Spin Up Current (reference only) 5V (1A) ,12V (2A)
Page: 34
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
35
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
3.5” 250 GB SATA 10000 RPM HDD
Capacity 250 GB
Dimensions inches (W x D x H) Approximately (4.00 x 5.787 x 1.028 inches)
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
Internal buffer size 64 MB
Rotational Speed 10000 rpm
Logical Blocks 488,397,168
Power Source
Power Consumption (reference only) Idle 5.0W, Active 10.0W(running IOmeter utility)
Spin Up Current (reference only) 5V (0.39A) ,12V (1.425A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 5% to 95% non-condensing
Maximum Wet Bulb Temperature 35°C
Altitude Range -1,000 ft to 10,000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 70°C
Relative Humidity Range 5% to 95% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -1,000 ft to 40,000 ft
Page: 35
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
36
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
2.5” 500GB SATA 7200 RPM HDD
Capacity 500GB
Dimensions inches (W x D x H) Approximately (3.93 x 2.75 x 0.374 inches)
Interface type and Maximum speed Up to 3Gb/s
Internal buffer size 16 MB
Rotational Speed 7200 rpm
Logical Blocks 976,773,168
Power Source
Power Consumption (reference only) Idle 0.7W, Active 3.25W
Spin Up Current (reference only) 5V (1A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
HARD DRIVES1
(CONT.)
Page: 36
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
37
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
2.5” 320GB SATA 7200 RPM HDD
Capacity 320GB
Dimensions inches (W x D x H) Approximately (3.93 x 2.75 x 0.374 inches)
Interface type and Maximum speed Up to 3Gb/s
Internal buffer size 16 MB
Rotational Speed 7200 rpm
Logical Blocks 625,142,448
Power Source
Power Consumption (reference only) Idle 0.7W, Active 3.25W
Spin Up Current (reference only) 5V (1A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
HARD DRIVES1
(CONT.)
Page: 37
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
38
Capacity 320GB
Dimensions inches (W x D x H) Approximately (2.75 x 3.94 x 0.374 inches)
Interface type and Maximum speed Up to 3Gb/s
Internal buffer size 16 MB
Rotational Speed 7200 rpm
Logical Blocks 625,142,448
Power Source
Power Consumption (reference only) Idle 0.7W, Active 3.25W
Spin Up Current (reference only) 5V (1A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
(CONT.)
.
2.5” 320GB SATA 7200 RPM OPAL SED W/FIPS HDD
Page: 38
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
39
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
2.5” 500GB SATA 7200 RPM HYBRID HDD
Capacity 500GB
Dimensions inches (W x D x H) Approximately (3.93 x 2.75 x 0.374 inches)
Interface type and Maximum speed Up to 6Gb/s
Internal buffer size 16 MB
Flash Cache 8GB
Logical Blocks 976,773,168
Power Source
Power Consumption (reference only) Idle 0.8W, Active 3.25W
Spin Up Current (reference only) 5V (1A)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 5°C to 60°C
Relative Humidity Range 20% to 80% non-condensing
Maximum Wet Bulb Temperature 29°C
Altitude Range -50 ft to 10000 ft
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -40°C to 65°C
Relative Humidity Range 10% to 90% non-condensing
Maximum Wet Bulb Temperature 38°C
Altitude Range -50 ft to 35000 ft
HARD DRIVES1
(CONT.)
Page: 39
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
40
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES1
(CONT.)
2.5” 128GB1
SATA SOLID STATE DRIVE
Capacity 128GB
Dimensions inches (W x D x H) Approximately (2.75 x 3.94 x 0.276 inches)
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
MTBF 1M hours
Logical Blocks 250,069,680
Power Source
Power Consumption (reference only) Idle 0.5W, Active 2.5W
Environmental Operating Conditions (Non-Condensing):
Temperature Range 0°C to 70°C
Relative Humidity Range 10 to 90%
Maximum Wet Bulb Temperature 29°C
Op Shock (@0.5ms) 1,500G
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -55°C to 95°C
Relative Humidity Range 5 to 95%
Maximum Wet Bulb Temperature 38°C
Page: 40
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
41
BLU-RAY WRITER MT DT SFF USFF
External Dimensions
inches/centimeters
(Without Bezel – W x H x
D)
148.2mm(6in)/42mm
(2in)/ 171 (max)
148.2mm(6in)/42mm
(2in)/ 171 (max)
128.0 mm (5.04in)/
12.7mm (0.5 in)/ 126.1mm
(4.97in)
128.0 mm (5.04in)/
12.7mm (0.5 in)/ 126.1mm
(4.97in)
Weight (max) pounds/
kilograms
730g 730g 190g 190g
Interface type and speed SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s
Disc Capacity Standard Standard Standard Standard
Internal buffer size supplier dependent supplier dependent supplier dependent supplier dependent
Access Times (typical) supplier dependent supplier dependent supplier dependent supplier dependent
Maximum Data Transfer Rates
Writes 6X BD/16x DVD/40x CD 6x BD/16x DVD/40x CD 6X BD/8x DVD/24x CD 6X BD/8x DVD/24x CD
Reads 8X BD/16x DVD/40x CD 8x BD/16x DVD/40x CD 6X BD/8x DVD/ 24x CD 6X BD/8x DVD/ 24x CD
Power Source
DC Power Requirements 12V, 5V 12V, 5V 5V 5V
DC Current
1200mA (12V)/ 900mA
(5V)
1200mA (12V)/ 900mA
(5V)
900mA 900mA
Environmental Operating Conditions (Non-Condensing):
Operating Temperature
Range
5°C to 50°C 5°C to 50°C 5°C to 50°C 5°C to 50°C
Relative Humidity Range 20% to 80% RH 20% to 80% RH 20% to 80% RH 20% to 80% RH
Maximum Wet Bulb Tem-
perature
29°C 29°C 29°C 29°C
Altitude Range -200 to 3048m -200 to 3048m -200 to 3048m -200 to 3048m
Operating Temperature
Range
-40°C to 65°C -40°C to 65°C -40°C to 65°C -40°C to 65°C
Relative Humidity Range 5% to 95% RH 5% to 95% RH 5% to 95% RH 5% to 95% RH
Maximum Wet Bulb Tem-
perature
38°C 38°C 38°C 38°C
Altitude Range -200 to 10600m -200 to 10600m -200 to 10600m -200 to 10600m
Environmental Non-Operating Conditions (Non-Condensing):
OPTICAL DRIVES
Page: 41
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
42
OPTICAL DRIVES (CONT.)
DVD +/- RW1
MT DT SFF USFF
External Dimensions
inches/centimeters
(Without Bezel – W x H x
D)
148.2mm(6in)/42mm
(2in)/ 171 (max)
148.2mm(6in)/42mm
(2in)/ 171 (max)
128.0 mm (5.04)/ 12.7mm
(0.5 in)/ 126.1mm (4.97in)
128.0 mm (5.04)/ 12.7mm
(0.5 in)/ 126.1mm (4.97in)
Weight (max) pounds/
kilograms
700g 700g 170g 170g
Interface type and speed SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s
Disc Capacity Standard Standard Standard Standard
Internal buffer size supplier dependent supplier dependent supplier dependent supplier dependent
Access Times (typical) supplier dependent supplier dependent supplier dependent supplier dependent
Maximum Data Transfer Rates
Writes 16x DVD/48x CD 16x DVD/48x CD 8x DVD/ 24x CD 8x DVD / 24x CD
Reads 16x DVD/48x CD 16x DVD/48x CD 8x DVD/ 24x CD 8x DVD/ 24x CD
Power Source
DC Power Requirements 12V, 5V 12V, 5V 5V 5V
DC Current
1200mA (12V)/ 900mA
(5V)
1200mA (12V)/ 900mA
(5V)
1000mA 1000mA
Environmental Operating Conditions (Non-Condensing):
Operating Temperature
Range
5°C to 50°C 5°C to 50°C 5°C to 50°C 5°C to 50°C
Relative Humidity Range 20% to 80% RH 20% to 80% RH 20% to 80% RH 20% to 80% RH
Maximum Wet Bulb Tem-
perature
29°C 29°C 29°C 29°C
Altitude Range -200 to 3048 -200 to 3048 -200 to 3048 -200 to 3048
Operating Temperature
Range
-40°C to 65°C -40°C to 65°C -40°C to 65°C -40°C to 65°C
Relative Humidity Range 5% to 95% RH 5% to 95% RH 5% to 95% RH 5% to 95% RH
Maximum Wet Bulb Tem-
perature
38°C 38°C 38°C 38°C
Altitude Range -200 to 10600m -200 to 10600m -200 to 10600m -200 to 10600m
Environmental Non-Operating Conditions (Non-Condensing):
1
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
DVD-ROM MT DT SFF USFF
External Dimensions
inches/centimeters
(Without Bezel – W x H x
D)
148.2mm(6in)/42mm
(2in)/ 170 (max)
148.2mm(6in)/42mm
(2in)/ 170 (max)
128.0 mm (5.04)/ 12.7mm
(0.5 in)/ 126.1mm (4.97in)
128.0 mm (5.04)/ 12.7mm
(0.5 in)/ 126.1mm (4.97in)
Weight (max) pounds/
kilograms
700g 700g 165g 165g
Interface type and speed SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s SATA 1.5Gbit/s
Disc Capacity Standard Standard Standard Standard
Internal buffer size supplier dependent supplier dependent supplier dependent supplier dependent
Access Times (typical) supplier dependent supplier dependent supplier dependent supplier dependent
Maximum Data Transfer Rates
Writes N/A N/A N/A N/A
Reads 16x DVD/48x CD 16x DVD/48x CD 8x DVD/ 24x CD 8x DVD/ 24x CD
Page: 42
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
43
OPTICAL DRIVES (CONT.)
DVD-ROM (CONT.) MT DT SFF USFF
Power Source
DC Power Requirements 12V, 5V 12V, 5V 5V 5V
DC Current
1200mA (12V)/ 900mA
(5V)
1200mA (12V)/ 900mA
(5V)
800mA 800mA
Environmental Operating Conditions (Non-Condensing):
Operating Temperature
Range
5°C to 50°C 5°C to 50°C 5°C to 50°C 5°C to 50°C
Relative Humidity Range 20% to 80% RH 20% to 80% RH 20% to 80% RH 20% to 80% RH
Maximum Wet Bulb Tem-
perature
29°C 29°C 29°C 29°C
Altitude Range -200 to 3048m -200 to 3048m -200 to 3048m -200 to 3048m
Environmental Non-Operating Conditions (Non-Condensing):
Operating Temperature
Range
-40°C to 65°C -40°C to 65°C -40°C to 65°C -40°C to 65°C
Relative Humidity Range 5% to 95% RH 5% to 95% RH 5% to 95% RH 5% to 95% RH
Maximum Wet Bulb Tem-
perature
38°C 38°C 38°C 38°C
Altitude Range -200 to 10600m -200 to 10600m -200 to 10600m -200 to 10600m
Page: 43
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
44
19 IN 1 MEDIA CARD READER MT/DT
External Dimensions inches/(centimeters)
(With Bezel – W x H)
3.99/(10.13cm)/1.0/(2.54cm)
Weight (max) pounds/kilograms ~155g
Interface type and speed USB 2.0, 480Mb/s
Media Supported ( maximum capacity supported will vary by Flash Media Types)
Media Supported
CF I
CF II
Micro Drive (MD)
Secure Digital (SD)
SDHC
Mini Secure Digital (mini-SD)
Micro Secure Digital (Micro-SD)(with adapter)
Multi Media Card (MMC)
RS Multi Media Card (RS-MMC)
Multi Media Card plus (MMC plus)
RS Multi Media Card plus (RS-MMC plus)
Multi Media Card Micro(MMC Micro) (with adapter)
Memory Stick (MS)
Memory Stick Pro(MS Pro)
Memory Stick Pro Duo (MS Pro Duo)
Memory Stick Duo (MS-Duo)
Memory Stick Micro(MS Micro)(M2) (with adapter)
Smart Media (SM)
xD
Support Specification Versions:
Compact Flash type I/II Version 4.0
Smart Media (SM) Specification 2003
Multi Media Card (MMC) Specification 4.2
Secure Digital (SD) 2.0
Memory Stick Pro (MS-PRO) Specification 1.02
Memory Stick (MS) Specification 1.43
xD Specification 1.2
Power Source
Max Power Requirements 2.5W
Supply Voltage Range 4.75V ~ 5.25V
Power Consumption: Standby less than 0.5mA @ 5.0VDC
Environmental Operating Conditions (Non-Condensing):
Operating Temperature Range 5°C to 50°C
Relative Humidity Range 10% to 90% RH
Environmental Non-Operating Conditions (Non-Condensing):
Operating Temperature Range -40°C to 65°C
Relative Humidity Range 5% to 95% RH
MEDIA CARD READER (MCR)
NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim
line optical drive depending on selectable configuration. MCR is not available on the SFF and USFF chassis.
Page: 44
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
45
BIOS DEFAULTS
System Configuration Integrated NIC: Enable w/PXE
Serial Port: COM1
SATA Operation: RAID On
Drives: Enable (SATA-0, SATA-1, SATA-2, SATA-3)
SMART Reporting: Disable
USB Configuration:
Enable (Boot Support, Front USB Ports, Rear
Dual USB Ports, Rear Quad USB Ports)
Miscellaneous Devices: Enable (PCI Slot)
Video Multi-display: Disable (For system with discrete graphics)
Security Strong Password: Disable
Password Configuration: 4~32
Password Bypass Disable
Password Changes: Enable
TPM Security: Disable
Computrace®: Deactivate
CPU XD Support: Enable
OROM Keyboard Access Enable
Admin Setup Lockout Disable
Chassis Intrusion
Disable (For system with Chassis Intrusion
detection)
Performance Multiple Core Support: All
Intel® SpeedStep™: Enable
C States Control: Enable
Intel TurboBoost Enable
HyperThread control: Enable
HDD Protection Support Enable (For China market only)
CPU XD Support: Enable
Power Management AC Recovery: Power Off
Auto On Time: Disable
Deep Sleep Control: Disable
Fan Control Override: Disable
Wake on LAN/WLAN: Disable
Block sleep Disable
POST Behavior Numlock LED: Enable
Keyboard Errors: Enable
POST HotKeys: Enable
Virtualization Support Virtualization: Enable
VT for Direct I/O: Enable
Trusted Direct I/O Disable
Maintenance Service Tag: Set by the factory
Asset Tag: Optional User Entry
SERR Message: Enable
USB Wake Support Disable
Page: 45
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
46
CHASSIS ENCLOSURE & VENTILATION REQUIREMENTS
ENCLOSURE VENTILATION
If your enclosure has doors, they need to be of a type that allows at least 30% airflow
through the enclosure (front and back).
ENCLOSURE MINIMUM CLEARANCE
Leave a 10.2 cm (4 in.) minimum clearance on all vented sides of the computer to permit
the airflow required for proper ventilation.
RECOMMENDED ENCLOSURE
Do not install your computer in an enclosure that does not allow airflow. This restricts the
airflow and impacts your computer’s performance, possibly causing it to overheat.
OPEN DESK MINIMUM CLEARANCE
If your computer is installed in a corner, on a desk, or under a desk, leave at least 5.1 cm (2 in.)
clearance from the back of the computer to the wall to permit the airflow required for proper
ventilation.
REGULATORY COMPLIANCE AND ENVIRONMENTAL
Product related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility
(EMC), Ergonomics, and Communication Devices relevant to this product may be viewed at www.dell.com/
regulatory_compliance. The Regulatory Datasheet for this product is located at http://www.dell.com/regulatory_compliance.
Details of Dell's environmental stewardship program to conserve product energy consumption, reduce or eliminate materials for
disposal, prolong product life span and provide effective and convenient equipment recovery solutions may be viewed at
www.dell.com/environment. Product related conformity assessment, regulatory authorizations, and information encompassing
Environmental, Energy Consumption, Noise Emissions, Product Materials Information, Packaging, Batteries, and Recycling relevant
to this product may be viewed by clicking the Design for Environment link on the webpage.
Page: 46
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
47
ACOUSTIC NOISE EMISSION INFORMATION
OPTIPLEX 9010 MT
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
Component Typical Configuration High-end Configuration
CPU Ivy Bridge i5 3470 Ivy Bridge i5 3770
Memory 4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
HDD (#, capacity) 500G 7200RPM SATA3 1T 7200RPM SATA3(x2)
RMSD 16X DVD+/-RW SATA HH 16X DVD+/-RW SATA HH
Graphics Adapter Intel® HD Graphics Family ATI Radeon HD7570
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 9010 MT is as follows:
(all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12
Watts)
Operating Mode
Typical Configuration
Declared Sound Power (LWAd)
High-end Configuration
Declared Sound Power (LWAd)
Idle 4.0 4.3
HDD Operating 4.0 4.4
90% CPU 4.0 4.8
ODD Operating 5.2 5.2
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows1
:
Operating Mode
Typical Configuration Declared Sound Pressure
(LpA)
High-end Configuration Declared Sound Pressure
(LpA)
Table-Top Floor-Standing Table-Top Floor- Standing
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Idle 29.4 25.3 23.2 22.1 35.9 33.6 24.7 24.3
HDD Operating 29.5 25.7 23.6 22.2 36.9 34.7 25.4 24.5
90% CPU 30.3 26.9 23.9 22.7 37.5 35.9 26.9 26.8
ODD Operating 42.7 39.6 36.6 35.4 42.7 40.1 37.1 34.7
Page: 47
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
48
ACOUSTIC NOISE EMISSION INFORMATION
OPTIPLEX 9010 DT
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
Component Typical Configuration High-end Configuration
CPU Ivy Bridge i5 3470 Ivy Bridge i5 3770
Memory 4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
HDD (#, capacity) 500G 7200RPM SATA3 1T 7200RPM SATA3
RMSD 16X DVD+/-RW SATA HH 16X DVD+/-RW SATA HH
Graphics Adapter Intel® HD Graphics Family ATI Radeon HD7570
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 9010 DT is as follows:
(all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12
Watts)
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows1
:
Operating Mode
Typical Configuration
Declared Sound Power (LWAd)
High-end Configuration
Declared Sound Power (LWAd)
Idle 3.4 3.9
HDD Operating 3.4 4.0
90% CPU 3.6 4.2
ODD Operating 5.1 5.2
Operating Mode
Typical Configuration Declared Sound Pressure
(LpA)
High-end Configuration Declared Sound Pressure
(LpA)
Table-Top Floor-Standing Table-Top Floor- Standing
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Idle 22.5 20.1 19.8 19.1 25.2 23.1 22.0 21.1
HDD Operating 22.7 20.0 19.5 19.2 25.4 23.5 21.9 20.9
90% CPU 23.9 22.2 24.6 23.5 32.6 30.2 25.7 25.2
ODD Operating 44.5 39.3 36.3 35.1 44.5 39.5 37.2 35.4
Page: 48
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
49
ACOUSTIC NOISE EMISSION INFORMATION
OPTIPLEX 9010 SFF
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 9010 SFF is as follows:
(all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12
Watts)
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows1
:
Operating Mode
Typical Configuration
Declared Sound Power (LWAd)
High-end Configuration
Declared Sound Power (LWAd)
Idle 3.9 4.3
HDD Operating 3.9 4.3
90% CPU 3.9 4.4
ODD Operating 4.8 4.8
Operating Mode
Typical Configuration Declared Sound Pressure
(LpA)
High-end Configuration Declared Sound Pressure
(LpA)
Table-Top Floor-Standing Table-Top Floor- Standing
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Idle 30.2 25.5 25.2 24.5 31.1 27.2 26.2 25.7
HDD Operating 30.3 25.8 25.5 24.9 31.4 27.5 26.1 25.8
90% CPU 33.1 29.2 26.9 26.0 34.3 30.7 28.9 28.5
ODD Operating 36.5 32.7 30.9 29.9 37.7 32.9 32.9 32.1
Component Typical Configuration High-end Configuration
CPU Ivy Bridge i5 3470 Ivy Bridge i5 3770
Memory 4G DDR3 1600MHz 8G DDR3 1600MHz(x2)
HDD (#, capacity) 500G 7200RPM SATA3 1T 7200RPM SATA3
RMSD 8X 12.7 SATA DVDRW 8X 12.7 SATA DVDRW
Graphics Adapter Intel® HD Graphics Family ATI Radeon HD7570
Page: 49
DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
50
ACOUSTIC NOISE EMISSION INFORMATION
OPTIPLEX 9010 USFF
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed
at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same
microphone distances and measurement techniques defined for the other reported operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
The Declared Noise Emission in accordance with ISO 9296 for the Dell Optiplex 9010 USFF is as follows:
(all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12
Watts)
The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows1
:
Operating Mode
Typical Configuration
Declared Sound Power (LWAd)
Idle 3.9
HDD Operating 3.9
90% CPU 4.8
ODD Operating 4.7
Component Typical Configuration
CPU Ivy Bridge i5 3470
Memory 4G DDR3 1600MHz
HDD (#, capacity) 500G 7200RPM SATA2
RMSD 8X 12.7 SATA DVDRW
Graphics Adapter Intel® HD Graphics Family
Operating Mode Typical Configuration Declared Sound Pressure (LpA)
Table-Top Floor-Standing
Operator
Position
(LpA)
Bystander
Position
(LpA)
Operator
Position
(LpA)
Bystander
Position
(LpA)
Idle 28.5 25.4 22.9 21.6
HDD Operating 28.6 25.6 22.9 21.7
90% CPU 28.9 25.8 23.8 21.9
ODD Operating 40.3 35.9 32.5 29.9

Question & answers

There are no questions about the Dell OptiPlex 9010 yet.

Ask a question about the Dell OptiPlex 9010

Have a question about the Dell OptiPlex 9010 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell OptiPlex 9010. Please make sure that you describe your difficulty with the Dell OptiPlex 9010 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.