Dell M110 manual

View a manual of the Dell M110 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Video projector
  • Model/name: M110
  • Filetype: PDF
  • Available languages: English, German, French, Spanish, Italian, Portuguese, Czech

Table of Contents

Page: 1
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you
make better use of your projector.
CAUTION: A CAUTION indicates potential damage to hardware
or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property
damage, personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written
permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of
Dell Inc.; DLP and DLP logo are trademarks of TEXAS INSTRUMENTS
INCORPORATED; Microsoft and Windows are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Dell Inc. disclaims
any proprietary interest in trademarks and trade names other than its own.
Model M110
October 2011 Rev. A00
Page: 2
Contents 3
Contents
1 Your Dell Projector . . . . . . . . . . . . . . . . . . 6
About Your Projector . . . . . . . . . . . . . . . . . 8
2 Connecting Your Projector . . . . . . . . . . . . 10
Connecting to a Computer . . . . . . . . . . . . . . . . 11
Connecting a Computer Using a VGA Cable . . . . 11
Connecting a Computer by USB Cable . . . . . . . 12
Connecting a Computer Using Wireless
Dongle (Optional) . . . . . . . . . . . . . . . . . . 13
Connecting a DVD Player . . . . . . . . . . . . . . . . 14
Connecting a DVD Player Using a A/V to RCA Cable 14
Connecting a DVD Player Using a HDMI Cable . . 15
Connecting to Multi-Media . . . . . . . . . . . . . . . 16
Connecting Multi-Media Using a USB Flash Disk . 16
Connecting Multi-Media Using a MicroSD Card . . 17
3 Using Your Projector . . . . . . . . . . . . . . . . 18
Turning Your Projector On . . . . . . . . . . . . . . . . 18
Turning Your Projector Off . . . . . . . . . . . . . . . . 18
Adjusting the Projected Image . . . . . . . . . . . . . 19
Raising the Projector Height . . . . . . . . . . . . 19
Lowering the Projector Height . . . . . . . . . . . 19
Page: 3
4 Contents
Adjusting the Projector Focus . . . . . . . . . . . . . . 20
Adjusting Projection Image Size . . . . . . . . . . . . 21
Using the Control Panel . . . . . . . . . . . . . . . . . 23
Installing the Remote Control Battery (Optional) . . . . 27
Operating Range with Remote Control . . . . . . . . . 28
Using the On-Screen Display . . . . . . . . . . . . . . 29
INPUT SOURCE . . . . . . . . . . . . . . . . . . . 29
AUTO ADJUST . . . . . . . . . . . . . . . . . . . 30
VIDEO MODE . . . . . . . . . . . . . . . . . . . . 31
VOLUME . . . . . . . . . . . . . . . . . . . . . . 31
AUDIO INPUT . . . . . . . . . . . . . . . . . . . . 31
ADVANCED SETTINGS . . . . . . . . . . . . . . . 32
LANGUAGE . . . . . . . . . . . . . . . . . . . . . 42
Multi-Media Introduction . . . . . . . . . . . . . . . . 43
How to set-up File Type for Multi-Media with USB 44
How to set-up File Type for Multi-Media with
MicroSD . . . . . . . . . . . . . . . . . . . . . . 46
How to set-up File Type for Multi-Media with
Internal Memory . . . . . . . . . . . . . . . . . . 48
Multi-Media SETUP for USB, Micro SD, and
Internal Memory . . . . . . . . . . . . . . . . . . 50
PHOTO SETUP . . . . . . . . . . . . . . . . . . . 50
VIDEO SETUP . . . . . . . . . . . . . . . . . . . . 51
MUSIC SETUP . . . . . . . . . . . . . . . . . . . 51
FIRMWARE UPDATE . . . . . . . . . . . . . . . . 52
4 Troubleshooting Your Projector . . . . . . . 53
Guiding Signals . . . . . . . . . . . . . . . . . . . . . 56
Page: 4
Contents 5
5 Specifications . . . . . . . . . . . . . . . . . . . . . 57
6 Contacting Dell . . . . . . . . . . . . . . . . . . . . 61
7 Appendix: Glossary . . . . . . . . . . . . . . . . . 62
Page: 5
6 Your Dell Projector
1
Your Dell Projector
Your projector comes with all the items shown below. Ensure that you have all the
items, and contact Dell™ if anything is missing.
Package Contents
Power cable Universal 24-pin to VGA cable
CD User’s Guide and Documentation Carrying case
AC adapter
DOCOMENTATION
DellTM
M110/M110HD
Projector
Dell
TM
M110/M110HD Projector
Quick Setup Guide
Informacion Importante
Dell TM
Projectors
oduct Information Guide
Page: 6
Your Dell Projector 7
Optional Contents
Remote control 3.5 mm jack A/V to RCA cable
1.2 m HDMI cable 3.5 mm jack A/V cable.
1.2 m USB cable (USB-A to USB-A) Universal 24-pin to VGA and Audio
out cable
Mini tripod Wireless dongle
F
C
C
I
D
:
S
U
Z
-
W
U
5
2
0
5
C
Page: 7
8 Your Dell Projector
About Your Projector
CAUTION: Safety Instructions
1 Do not use the projector near appliances that generate a lot of heat.
2 Do not use the projector in areas where there is an excessive amount of dust. The
dust may cause the system to fail and the projector will automatically shut down.
3 Ensure that the projector is mounted in a well-ventilated area.
4 Do not block the ventilation slots and openings on the projector.
5 Ensure the projector operates between ambient temperatures (5 ºC to 35 ºC).
6 Do not try to touch the ventilation outlet as it can become very hot after the
projector has been turned on or immediately after it is turned off.
7 Do not look into the lens while the projector is on as it may cause injury to your
eyes.
8 Do not place any objects near or in front of the projector or cover its lens while the
projector is on as the heat may cause the object to melt or burn.
9 Do not use alcohol to wipe the lens.
10 Do not use the wireless projector near cardiac pacemakers.
1 Control panel
2 Focus ring
3 Lens
4 Tilt adjusting wheel
5 Mounting hole for tripod: Insert nut 1/4"*20 UNC
1
2
3
4
5
Top View Bottom View
Page: 8
Your Dell Projector 9
11 Do not use the wireless projector near medical equipment.
12 Do not use the wireless projector near microwave ovens.
NOTE:
• Recommended Projector Tripod Kit (VXJN3). For more information, see
the Dell Support website at support.dell.com.
• For more information, see the Safety Information that shipped with your
projector.
Page: 9
10 Connecting Your Projector
2
Connecting Your Projector
CAUTION: Before you begin any of the procedures in this section, follow the
Safety Instructions as described on page 8.
1 MicroSD card slot for multi-
media playback
(Video/Audio/Photo) and
supporting media and image
processor firmware upgrade
5 HDMI connector
2 USB Type A connector for USB
display, multi-media playback
(Video/Audio/Photo), USB
memory storage access (USB flash
drive/internal memory), projector
firmware upgrade, and supporting
optional wireless dongle and
mobishow
6 Universal I/O connector for VGA
input and Audio output
3 DC input connector 7 Security cable slot
4 Audio/Video input connector
3
4
5
6
7
1 2
Page: 10
Connecting Your Projector 11
Connecting to a Computer
Connecting a Computer Using a VGA Cable
NOTE: Only one universal 24-pin to VGA cable is shipped with your projector.
An additional universal 24-pin to VGA cable or 24-pin to VGA and Audio out
cable can be purchased on the Dell website at www.dell.com.
1 Power cord
2 AC adapter
3 Universal 24-pin to VGA cable
2
1
3
Page: 11
12 Connecting Your Projector
Connecting a Computer by USB Cable
NOTE: Plug and Play. The USB (USB A to A) cable is not shipped with your
projector. You can purchase the USB (USB A to A) cable on the Dell website at
www.dell.com.
1 Power cord
2 AC adapter
3 USB-A to USB-A cable
2
1
3
M
O
L
E
X
M
O
L
E
X
Page: 12
Connecting Your Projector 13
Connecting a Computer Using Wireless Dongle (Optional)
NOTE: Your computer should be equipped with a wireless connector and
properly configured to detect another wireless connection. Refer to your
computer’s documentation on how to configure a wireless connection.
NOTE: Your projector must be installed with a wireless dongle if you want to
use the wireless display. The wireless dongle is not shipped with your projector.
You can purchase it on the Dell website at www.dell.com.
F
C
C
ID
:
S
U
Z
-W
U
52
05
C
Page: 13
14 Connecting Your Projector
Connecting a DVD Player
Connecting a DVD Player Using a A/V to RCA Cable
NOTE: The 3.5 mm jack A/V to RCA cable is not shipped with your projector. You
can purchase the 3.5 mm jack A/V to RCA cable on the Dell website at
www.dell.com.
1 Power cord
2 AC adapter
3 3.5 mm jack A/V to RCA cable
2
1
3
Page: 14
Connecting Your Projector 15
Connecting a DVD Player Using a HDMI Cable
NOTE: The HDMI cable is not shipped with your projector. You can purchase
the HDMI cable on the Dell website at www.dell.com.
1 Power cord
2 AC adapter
3 HDMI cable
2
1
3
3
Page: 15
16 Connecting Your Projector
Connecting to Multi-Media
Connecting Multi-Media Using a USB Flash Disk
NOTE: The USB flash disk is not shipped with your projector.
1 Power cord
2 AC adapter
3 USB flash disk
2
1
3
Page: 16
Connecting Your Projector 17
Connecting Multi-Media Using a MicroSD Card
NOTE: The microSD card is not shipped with your projector.
1 Power cord
2 AC adapter
3 MicroSD card
2
1
3
Page: 17
18 Using Your Projector
3
Using Your Projector
Turning Your Projector On
NOTE: Turn on the projector before you turn on the source (computer, DVD
player, etc.). The Power button light blinks blue until pressed.
1 Connect the power cord with AC adapter and appropriate signal cables to the
projector. For information about connecting the projector, see "Connecting Your
Projector" on page 10.
2 Press the Power button (see "Using the Control Panel" on page 23 to locate the
Power button).
3 Turn on your source (computer, DVD player, etc).
4 Connect your source to the projector using the appropriate cable. See
"Connecting Your Projector" on page 10 for instructions to connect your source to
the projector.
5 By default, the input source of the projector is set to VGA. Change the input
source of the projector if necessary.
6 If you have multiple sources connected to the projector, press the Source button
on the remote control or control panel to select the desired source. See "Using the
Control Panel" on page 23 and "Using the Remote Control (Optional)" on page 25
to locate the Source button.
Turning Your Projector Off
CAUTION: Unplug the projector after properly shutting down as explained in
the following procedure.
1 Press the Power button. Follow the instruction displayed on screen to properly
turn off the projector.
NOTE: The "Press Power Button to Turn off Projector" message will
appear on the screen. The message disappears after 5 seconds or you can
press the Menu button to clear it.
2 Press the Power button again. The cooling fans continue to operate for 120
seconds.
Page: 18
Using Your Projector 19
3 To power off the projector quickly, press the Power button and hold for 1 second
while the projector’s cooling fans are still running.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4 Disconnect the power cord and AC adapter from the electrical outlet and the
projector.
Adjusting the Projected Image
Raising the Projector Height
1 Raise the projector to the desired display angle, and use the front tilt adjustment
wheel to fine-tune the display angle.
Lowering the Projector Height
1 Lower the projector, and use the front tilt adjustment wheel to fine-tune the
display angle.
1 Front tilt adjustment wheel
(Angle of tilt: 0 to 6 degrees)
1
1
Page: 19
20 Using Your Projector
Adjusting the Projector Focus
CAUTION: To avoid damaging the projector, ensure that the adjustment
wheels are fully retracted before moving the projector or placing the projector
in its carrying case.
1 Rotate the focus tab until the image is clear. The projector focuses at distances
ranging between 3.18 ft to 8.48 ft (97 cm to 258 cm).
1 Focus tab
1
Page: 20
Using Your Projector 21
Adjusting Projection Image Size
80" (203.2 cm)
70" (177.8 cm)
60" (152.4 cm)
50" (127.0 cm)
40" (101.6 cm)
30" (76.2 cm)
8.48'
(2.58
m)
7.41'
(2.26
m)
6.36'
(1.94
m)
5.28'
(1.61
m)
4.23'
(1.29
m)
3.18' (0.97 m)
Projector
to
screen
distance
Page: 21
22 Using Your Projector
Screen (Diagonal) 30"
(76.2 cm)
40"
(101.6 cm)
50"
(127.0 cm)
60"
(152.4 cm)
70"
(177.8 cm)
80"
(203.2 cm)
Screen Size 25.59" X
15.75"
33.86" X
21.26"
42.13" X
26.38"
50.79" X
31.89"
59.45" X
37.01"
67.72" X
42.52"
(65 cm X
40 cm)
(86 cm X
54 cm)
(107 cm X
67 cm)
(129 cm X
81 cm)
(151 cm X
94 cm)
(172 cm X
108 cm)
Hd
15.75"
(40 cm)
21.26"
(54 cm)
26.38"
(67 cm)
31.89"
(81 cm)
37.01"
(94 cm)
42.52"
(108 cm)
Distance 3.18''
(0.97 m)
4.23'
(1.29 m)
5.28'
(1.61 m)
6.36'
(1.94 m)
7.41'
(2.26 m)
8.48'
(2.58 m)
* This graph is for user reference only.
Height
(Hd):
81
cm
D
i
s
t
a
n
c
e
:
1
.
9
4
m
Page: 22
Using Your Projector 23
Using the Control Panel
1 Power Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 18 and "Turning Your Projector Off" on
page 18.
2 Up / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-40 degrees).
3 Right / Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
4 TEMP LED If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
For more information, see "Troubleshooting Your
Projector" on page 53 and "Guiding Signals" on
page 56.
3
5
2
4
6
7
8
9
1
Page: 23
24 Using Your Projector
5 Error LED Error LED is blinking amber, one of the fans has
failed. The projector will automatically shut
down.
6 Menu Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
7 Down / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-40 degrees).
8 Left / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
and HDMI sources when multiple sources are
connected to the projector.
9 Enter Press to confirm the selection item.
Page: 24
Using Your Projector 25
Using the Remote Control (Optional)
1 LED light LED indicator.
2 Source Press to switch between Analog RGB, Composite,
and HDMI source.
3 Auto adjust Press to synchronize the projector with the input
source. Auto adjust does not operate if the OSD
(On-Screen Display) is displayed.
4 Up Press to navigate through the On-Screen Display
(OSD) Menu items.
5 Left Press to navigate through the On-Screen Display
(OSD) Menu items.
6 Enter Press to confirm the selection.
7 Menu Press to activate the OSD.
8 Down Press to navigate through the On-Screen Display
(OSD) Menu items.
9 Mute Press to mute or un-mute the projector speaker.
11
12
13
15
17
14
19
16
18
20
1
2
3
5
7
4
9
6
8
10
Page: 25
26 Using Your Projector
10 Aspect ratio Press to change aspect ratio of a displayed image.
11 Power Turns the projector on and off. For more
information, see "Turning Your Projector On" on
page 18 and "Turning Your Projector Off" on
page 18.
12 Video mode The projector has preset configurations that are
optimized for displaying data (presentation
slides) or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show
the current display mode. Pressing the Video
Mode button again will switch between modes.
13 Play/Pause Press to play/pause media file.
14 Blank screen Press to hide/unhide the image.
15 Stop Press to stop playing media file.
16 Right Press to navigate through the On-Screen Display
(OSD) Menu items.
17 Volume up Press to increase the volume.
18 Keystone adjustment Press to adjust image distortion caused by tilting
the projector (+/-40 degrees).
19 Volume down Press to decrease the volume.
20 Keystone adjustment Press to adjust image distortion caused by tilting
the projector (+/-40 degrees).
Page: 26
Using Your Projector 27
Installing the Remote Control Battery (Optional)
1 Remove the battery holder by holding down
the side release firmly and pulling out the
battery holder.
2 Insert a CR2032 coin cell battery and align
the polarity correctly according to the marking
in the battery holder.
NOTE: When you use the remote control for the
first time, there is a plastic sheet between the
battery and its contact. Remove the sheet
before use.
3 Replace the battery holder.
3V
O
L
T
S
C
R
2
0
3
2
3V
O
L
T
S
C
R
2
0
3
2
M
3V
O
L
T
S
C
R
2
0
2
5
Page: 27
28 Using Your Projector
Operating Range with Remote Control
NOTE: Actual operating range may slightly differ from the diagram. Weak
battery will also prevent the remote control from properly operating the
projector.
Operating range
Angle ±20°
Distance 7 m/22.97 feet
Distance
Angle
Page: 28
Using Your Projector 29
Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter the
Main Menu.
• To select an option, press the or buttons on your projector’s control panel
or remote control.
• Use the or buttons on the control panel or remote control to adjust the
settings.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
AUTO SOURCE—If you select and press
to activate, the Auto Source option
will automatically find the next available
input source.
VGA—Press to detect a VGA signal.
DOUSB—Allows you to display the
computer/laptop screen to your
projector via the USB cable.
NOTE: When you connect the projector and computer via the USB cable, a
USB Connected message will pop up and allow you to select input sources as
DoUSB or Storage.
Page: 29
30 Using Your Projector
The USB Connected Screen shown below appears:
STORAGE MODE—Allows you to execute copy, delete, move, and more
instructions from your computer (only supports microSD and
internal memory).
HDMI—Press to detect a HDMI signal.
A/V IN—Allows you to display the Audio/Video source to your projector via the
A/V cable.
USB—Allows you to playback the photo, Audio, or Video files from your USB
flash disk. See "Multi-Media Introduction" on page 43.
MICROSD—Allows you to playback the photo, Audio, or Video files from your
microSD card. See "Multi-Media Introduction" on page 43.
INTERNAL MEMORY—Allows you to playback the photo, Audio, or Video files from
internal memory of the projector. See "Multi-Media Introduction" on page 43.
AUTO ADJUST
Auto Adjust automatically adjusts the projector's Horizontal, Vertical, Frequency,
and Tracking in PC mode.
Page: 30
Using Your Projector 31
VIDEO MODE
The Video Mode menu allows you to optimize the display image. The options are:
Presentation, Bright, Movie, sRGB (provides more accurate color representation),
and Custom (set your preferred settings) mode.
VOLUME
The Volume menu allows you adjust the volume setting of your projector.
VOLUME—Press to decrease the volume and to increase the volume.
AUDIO INPUT
The Audio Input menu allows you to select your audio input source. The options
are: Auto Source, Multimedia, A/V In, and HDMI.
Page: 31
32 Using Your Projector
ADVANCED SETTINGS
The Advanced Settings menu allows you to change settings for Image, Display,
Projector, Menu, Power, and Information.
IMAGE SETTINGS (IN PC MODE)—Select and press to activate image settings.
The image settings menu provides the following options:
Page: 32
Using Your Projector 33
BRIGHTNESS—Press and to adjust the brightness of the image.
CONTRAST—Press and to adjust the display contrast.
COLOR TEMPERATURE—Allows you to adjust the color temperature. The
screen appears cooler at higher color temperatures and warmer at
lower color temperatures.
WHITE INTENSITY—Press and use and to display white
intensity.
NOTE: If you adjust the settings for Brightness, Contrast, Color Temperature,
and White Intensity the projector automatically switches to Custom mode.
IMAGE SETTINGS (IN VIDEO MODE)—Select and press to activate image settings.
The image settings menu provides the following options:
BRIGHTNESS—Press and to adjust the brightness of the image.
CONTRAST—Press and to adjust the display contrast.
COLOR TEMPERATURE—Allows you to adjust the color temperature. The
screen appears cooler at higher color temperatures and warmer at
lower color temperatures.
SATURATION—Allows you to adjust the video source from black and
white to fully saturated color. Press to increase the amount of
color in the image and to decrease the amount of color in the
image.
SHARPNESS—Press to increase the sharpness and to decrease
the sharpness.
TINT—Press to increase the amount of green in the image and
to decrease the amount of green in the image (available for NTSC
only).
Page: 33
34 Using Your Projector
WHITE INTENSITY—Press and use and to display white
intensity.
NOTE:
1 If you adjust the settings for Brightness, Contrast, Color Temperature,
Saturation, Sharpness, Tint, and White Intensity the projector automatically
switches to Custom mode.
2 Saturation, Sharpness, and Tint are only available when input source is from
A/V in.
DISPLAY SETTINGS (IN PC MODE)—Select and press to activate display settings.
The display settings menu provides the following options:
HORIZONTAL POSITION—Press to move the image right and to
move the image left.
VERTICAL POSITION—Press to move the image up and to move
the image down.
FREQUENCY—Allows you to change the display data clock frequency to
match the frequency of your computer’s graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
TRACKING—Synchronize the phase of the display signal with the
graphic card. If you experience an unstable or flickering image, use
the Tracking to correct it. This is a fine adjustment.
ASPECT RATIO—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:9, and 4:3.
• Original — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
Page: 34
Using Your Projector 35
• 4:3 — The input source scales to fit the screen and projects a 4:3 image.
ZOOM—Press and to zoom and view the image.
ZOOM NAVIGATION—Press to activate the Zoom
Navigation menu.
Use to navigate the projection screen.
DISPLAY SETTINGS (IN VIDEO MODE)—Select and press to activate display
settings. The display settings menu provides the following options:
ASPECT RATIO—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:9, and 4:3.
• Original — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
• 4:3 — The input source scales to fit the screen and projects a 4:3 image.
ZOOM—Press and to zoom and view the image.
ZOOM NAVIGATION—Press to activate the Zoom
Navigation menu.
Use to navigate the projection screen.
PROJECTOR SETTINGS—Select and press to activate projector settings. The
Page: 35
36 Using Your Projector
projector settings menu provides the following options:
PROJECTOR MODE—Allows you to select the projector mode,
depending upon how the projector is mounted.
• Rear Projection-Desktop — The projector reverses the image so that
you can project from behind a translucent screen.
• Front Projection-Desktop — This is the default option.
SPEAKER—Select On to enable speaker. Select Off to disable speaker.
CLOSED CAPTION—Select On to enable close caption and activate the
closed caption menu. Select appropriate closed caption options:
CC1, CC2, CC3, and CC4.
NOTE: Closed caption option is available for NTSC only.
TEST PATTERN—Test Pattern is used to test focus and resolution.
You can enable or disable the Test Pattern by selecting Off, 1, or 2.
You can also invoke the Test Pattern 1 by pressing and holding down
and buttons on the control panel simultaneously for 2
Page: 36
Using Your Projector 37
seconds. You can also invoke the test pattern 2 by pressing and
holding down and buttons on the control panel
simultaneously for 2 seconds.
FACTORY RESET—Select and press to reset all settings to its factory
default. The below warning message appears:
Reset items include both computer sources and Video source
settings.
Test Pattern 2:
Test Pattern 1:
Page: 37
38 Using Your Projector
MENU SETTINGS—Select and press to activate the menu settings. The menu
settings consists of the following options:
MENU POSITION—Allows you to change the position of the OSD
menu on the screen.
MENU TIMEOUT—Allows you to adjust the time for an OSD timeout.
By default, the OSD disappears after 20 seconds of non-activity.
MENU TRANSPARENCY—Select to change the transparency level of the
OSD background.
MENU LOCK—Select On to enable Menu Lock and hide the OSD
menu. Select OFF to disable the Menu Lock. If you want to disable
the Menu Lock function and have the OSD disappear, press the
Menu button on the control panel or remote control for 15 seconds,
then disable the function.
PASSWORD—When Password Protect is enabled, a Password Protect
screen requesting you to enter a password will be displayed when the
power plug is inserted into the electrical outlet and the power for the
projector is first turned on. By default, this function is disabled. You
can enable this feature by selecting Enabled. If the password has
been set before, key in the password first and select the function.
This password security feature will be activated the next time you
turn on the projector. If you enable this feature, you will be asked to
enter the projector's password after you turn on the projector:
1 First time password input request:
Page: 38
Using Your Projector 39
a Go to Menu Settings, press and then select Password to Enable the
password settings.
b Enabling the Password function will pop up a change screen. Key in a
4-digit number from the screen and press .
c To confirm, enter the password again.
d If the password verification is successful, you may resume with
accessing the projector's functions and its utilities.
2 If you have entered an incorrect password, you will be given another two
chances. After three invalid attempts, the projector will automatically
turn off.
NOTE: If you forget your password, contact DELL™ or a qualified
service personnel.
3 To disable the password function, select the Disable option to close the
function.
4 To delete the password, select the Delete option.
Page: 39
40 Using Your Projector
CHANGE PASSWORD—Key in the original password. Then, enter the
new password and confirm the new password again.
Page: 40
Using Your Projector 41
POWER SETTINGS—Select and press to activate power settings. The power
settings menu provides the following options:
POWER SAVING—Select Off to disable Power Saving mode. By default,
the projector is set to enter power saving mode after 120 minutes of
no activity. A warning message appears on screen showing a 60
seconds countdown before switching to power saving mode. Press
any button during the countdown period to stop the power-saving
mode.
You can also set a different delay period to enter power saving mode.
The delay period is the time you want the projector to wait without
an input signal. Power saving can be set to 30, 60, 90, or 120 minutes.
If an input signal is not detected during the delay period, the
projector turns off. To turn on the projector, press the Power button.
LED MODE—Allows you to select between Normal or ECO mode.
Normal mode operates at full power level. ECO mode operates at a
lower power level which may provide longer LED life, quieter
operation, and dimmer luminance output on the screen.
INFORMATION—The information menu displays the current M110 projector settings.
Page: 41
42 Using Your Projector
LANGUAGE
Allows you to set the language for the OSD. Press and to select different
languages and press to change the language.
Page: 42
Using Your Projector 43
Multi-Media Introduction
Multi-media format supported:
Photo Format
Video Format
Audio Format
Image Type
(Ext Name)
Sub Type Encode Type Max Pixels Max Size
Jpeg / Jpg
Baseline
YUV420
No Limitation 2GB
YUV422
YUV440
YUV444
progressive
YUV420
64x panel
resolution
2GB
YUV422
YUV440
YUV444
BMP
64x panel
resolution
File Format Video
Format
Profile &
Level
MAX
Res
MAX Bit
Rate (bps)
Audio Format
MOV, MP4, AVI,
MKV, DIVX
H264
less than 4
reference
frames
1080P 20Mbps
AC3, DTS, MP1, MP2,
MP3, PCM, ADPCM
MOV, MP4 MPEG4 1080P 20Mbps AMR, PCM, ADPCM
WMV WMV3 1080P 20Mbps WMA2, WMA3
Music Type (Ext Name) Sample Rate (KHz) Bit Rate (Kbps)
MP1 8-48 8-320
MP2 8-48 8-320
MP3 8-48 8-320
WMA 22-48 5-320
Page: 43
44 Using Your Projector
How to set-up File Type for Multi-Media with USB
NOTE: A USB flash disk must be plugged into the projector if you want to use
the multimedia USB function.
Follow these steps to playback the Photo, Video, or Music files on your projector:
1 Connect the power cable with AC adapter and turn on the projector by
pressing the power button.
2 Plug in a USB flash disk to your projector.
Page: 44
Using Your Projector 45
3 Access the Input Source menu, select the USB option and press the
button. The image input source will automatically switch to Multimedia
Menu when USB option is selected in this step.
The USB Screen shown below appears:
4 Select the multi-media files: Photo, Video, or Music, and then press the
to start playing. Or select the SETUP option to change settings for Photo,
Video, or Music. See "Multi-Media Setup" on page 50.
Page: 45
46 Using Your Projector
How to set-up File Type for Multi-Media with MicroSD
NOTE: A microSD card must be plugged into the projector if you want to use
the multimedia microSD function.
Follow these steps to playback the Photo, Video, or Music files on your projector:
1 Connect the power cable with AC adapter and turn on the projector by
pressing the power button.
2 Plug in a MicroSD card to your projector. The image input source will be
automatically switched to microSD screen when you plug in a microSD card.
Page: 46
Using Your Projector 47
3 Access the Input Source menu, select the MicroSD option and press the
button. The image input source will automatically switch to MicroSD screen
when MicroSD option is selected in this step.
The Micro SD Screen Screen shown below appears:
4 Select the multi-media files: Photo, Video, or Music, and then press the
to start playing. Or select the SETUP option to change settings for Photo,
Video, or Music. See "Multi-Media Setup" on page 50.
Page: 47
48 Using Your Projector
How to set-up File Type for Multi-Media with Internal Memory
Follow these steps to playback the Photo, Video, or Music files on your projector:
1 Connect the power cable with AC adapter and turn on the projector by
pressing the power button.
2 Access the Input Source menu, select the Internal Memory option and press
the button. The image input source will be automatically switched to
Internal Memory screen when Internal Memory option is selected in this
step.
Page: 48
Using Your Projector 49
The Internal Memory Screen shown below appears:
3 Select the multi-media files: Photo, Video, or Music, and then press the
to start playing. Or select the SETUP option to change settings for Photo,
Video, or Music. See "Multi-Media Setup" on page 50.
Page: 49
50 Using Your Projector
Multi-Media SETUP for USB, Micro SD, and Internal Memory
The multi-media setup menu allows you to change settings for Photo, Video, and
Music.
NOTE: Multi-media setup menu and set are the same for the USB, Micro SD,
and Internal Memory.
PHOTO SETUP
Select and press to activate photo setup menu. The photo setup menu
provides the following options:
DISPLAY MODE—Press or to select the display mode of the photo on the
screen. Options are: File List, Browse Mode, Thumbnail, and Slideshow.
DISPLAY RATIO—Press or to select the display ratio of the photo as Auto
(original ratio) or Full (full screen).
SLIDESHOW DURATION—Press or to select the slideshow duration. The
image will automatically switch to the next photo after the time out. Options are:
5 sec, 15 sec, 30 sec, 1 min, 5 min, and 15 min.
SLIDESHOW REPEAT—Select On to repeat slideshow always. Or select "Off" to stop
slideshow when it goes to the last page.
SLIDESHOW EFFECT—Press or to select what slideshow effect you want.
Options are: Random, Rect., Off, Snake, Partition, Erase, Blinds, Lines,
GridCross, Cross, and Spiral.
NOTE: Slideshow Duration, Slideshow Repeat, and Slideshow Effect function
only support Slideshow mode.
Page: 50
Using Your Projector 51
VIDEO SETUP
Select and press to activate video setup menu. The video setup menu provides
the following options:
DISPLAY RATIO—Press or to select the display ratio of the Video.
AUTO—Keep original aspect ratio.
ORIGINAL SIZE—Display video in original size of the content.
PLAY MODE—Press or to select the video play mode. Options are: Once,
Repeat Once, Repeat, and Random.
AUTO PLAY—Select On to play the video automatically while entering the video
list.
MUSIC SETUP
Select and press to activate music setup menu. The music setup menu
provides the following options:

Question & answers

There are no questions about the Dell M110 yet.

Ask a question about the Dell M110

Have a question about the Dell M110 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell M110. Please make sure that you describe your difficulty with the Dell M110 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.