View a manual of the Dell E Series E2016HV below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.
2 NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2015~2016 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™ and the DELL logo are trademarks of Dell Inc.; Microsoft®, Windows®, and the Windows start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. 2016 – 7 Rev. A04
3 Contents About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . 7 Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Plug and Play Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 LCD Monitor Quality & Pixel Policy . . . . . . . . . . . . . . . . . . . . . 18 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Setting Up the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Connecting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Organizing Your Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Removing the Monitor Stand . . . . . . . . . . . . . . . . . . . . . . . . .21 Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Operating the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Power On the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Using the Front-Panel Controls . . . . . . . . . . . . . . . . . . . . . . . .23 Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . . . . . . 24 Setting the Maximum Resolution . . . . . . . . . . . . . . . . . . . . . . 48 Using the Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Product-Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Dell Soundbar Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 FCC Notices (U.S. Only) and Other Regulatory Information . . . . . . 60 Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
About Your Monitor 5 About Your Monitor Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell if anything is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. • Monitor • Stand Riser • Stand Base • VESA™ Screw Cover • Power Cable (varies with countries) • VGA Cable • Drivers and Documentation media • Quick Setup Guide • Safety and Regulatory Information
6 About Your Monitor Product Features The Dell E1916HV / E1916HL / E2016HV / E2016HL / E2216HV / E2216HVM flat-panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display and LED backlight. The monitor’s features include: • E1916HV / E1916HL: 47.01 cm (18.51 inches) diagonal viewable image size, 1366 x 768 resolution, plus full-screen support for lower resolutions. • E2016HV / E2016HL: 49.41 cm (19.5 inches) diagonal viewable image size, 1600 x 900 resolution, plus full-screen support for lower resolutions. • E2216HV / E2216HVM: 54.69 cm (21.53 inches) diagonal viewable image size, 1920 x 1080 resolution, plus full-screen support for lower resolutions. • Tilt adjustment capability. • Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions. • Plug and play capability if supported by your system. • On-Screen Display (OSD) adjustments for ease of set-up and screen optimization. • Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation. • Dell Display Manager Software • ENERGY STAR-compliant. • Security lock slot. • Asset Management Capability. • EPEAT Silver compliant. • CECP (for China). • RoHS compliant. • Energy Gauge shows the energy level being consumed by the monitor in real time. • Analog backlight dimming control for flicker free display. NOTE: Dell monitors are Energy Star certified in all regions except for the following: E1916HV, E1916HL and E2016HV in Asia Pacific, E2216HV in America/ Asia Pacific. DELL registers products in the EPEAT environmental performance rating system. EPEAT registration varies by country. See www.epeat.net for registration status by country.
About Your Monitor 7 Identifying Parts and Controls Front View 1 Function buttons (For more information, see Operating the Monitor) 2 Power On/Off button (with LED indicator) Back View E1916HV / E1916HL / E2016HV / E2016HL: Back View with Monitor Stand
8 About Your Monitor E2216HV / E2216HVM: Back View with Monitor Stand Label Description Use 1 VESA mounting holes (100 mm) To mount the monitor. 2 Regulatory rating label Lists the regulatory approvals. 3 Security lock slot Secures monitor with security lock (security lock not included). 4 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 5 Cable management slot Use to organize cables by placing them through the slot. Side View Right Side
About Your Monitor 9 Bottom View Label Description Use 1 AC power connector To connect the monitor power cable. 2 VGA connector To connect your computer to the monitor using a VGA cable. 3 Dell soundbar mounting slots To attach the optional Dell Soundbar. Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor. Power Management Modes If you have VESA’s DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power-saving feature: E1916HV / E1916HL: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active White 17 W (Maximum)** 14 W (Typical) Active-off mode Inactive Inactive Blank Glowing white Less than 0.3 W Switch off - - Off Less than 0.3 W * Energy Star Power Consumption PON 10 W*** ETEC 33.2 kWh*** E2016HV: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active White 17 W (Maximum)** 14 W (Typical) Active-off mode Inactive Inactive Blank Glowing white Less than 0.3 W
10 About Your Monitor Switch off - - Off Less than 0.3 W * Energy Star Power Consumption PON 11.98 W*** ETEC 38.6 kWh*** E2016HL: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active White 19 W (Maximum)** 15 W (Typical) Active-off mode Inactive Inactive Blank Glowing white Less than 0.3 W Switch off - - Off Less than 0.3 W * Energy Star Power Consumption PON 11.98 W*** ETEC 37.9 kWh*** E2216HV / E2216HVM: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active White 24 W (Maximum)** 18 W (Typical) Active-off mode Inactive Inactive Blank Glowing white Less than 0.3 W Switch off - - Off Less than 0.3 W * Energy Star Power Consumption PON 15.5 W*** ETEC 49.6 kWh*** NOTE: PON: Power consumption of on mode as defined in Energy Star 7.0 version. ETEC: Total energy consumption in kWh as defined in Energy Star 7.0 version. The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD.
About Your Monitor 11 NOTE: Dell monitors are Energy Star certified in all regions except for the following: E1916HV, E1916HL and E2016HV in Asia Pacific, E2216HV in America/ Asia Pacific. DELL registers products in the EPEAT environmental performance rating system. EPEAT registration varies by country. See www.epeat.net for registration status by country. * Zero-power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ** Maximum power consumption with max luminance and contrast. *** This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. Pin Assignments 15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 DDC +5 V 10 GND-sync
12 About Your Monitor 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required. Flat-Panel Specifications Model number E1916HV / E1916HL E2016HV Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel Type TN TN Viewable image Diagonal 470.1 mm (18.51 inches) 494.1 ± 0.02 mm (19.5 ± 0.05 inches) Horizontal Active Area 409.8 mm (16.13 inches) 432.0 ± 1.92 mm (17.0 ± 0.08 inches) Vertical Active Area 230.4 mm (9.07 inches) 239.76 ± 3.42 mm (9.44 ± 0.13 inches) Area 94417.92 mm2 (146.35 inches2 ) 102552.65 ± 1050 mm2 (158.84± 1.56 inches2 ) Pixel pitch 0.30 x 0.30 mm 0.2712 ± 0.0012 x 0.2626 ± 0.0074 mm Viewing angle: Horizontal 90° typical 90° typical Vertical 65° typical 50° to 65° typical Luminance output 200 cd/m² (typical) 200 cd/m² (typical) Contrast ratio 600 to 1 (typical) 600 to 1 (typical)
About Your Monitor 13 Faceplate coating Antiglare with hard-coating 3H Antiglare with hard-coating 3H Backlight LED light bar system LED light bar system Response Time 5 ms typical (white to black, black to white) 5 ms typical (white to black, black to white) Color Depth 16.7 mil colors 16.7 mil colors Color Gamut 85 % (typical) ** 85 % (typical) ** Model number E2016HL E2216HV / E2216HVM Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel Type TN TN Viewable image Diagonal 494.1 ± 0.02 mm (19.5 ± 0.05 inches) 546.86 mm (21.53 inches) Horizontal Active Area 432.0 ± 1.92 mm (17.0 ± 0.08 inches) 476.64 mm (18.77 inches) Vertical Active Area 239.76 ± 3.42 mm (9.44 ± 0.13 inches) 268.11 mm (10.56 inches) Area 102552.65 ± 1050 mm2 (158.84± 1.56 inches2 ) 127791.95 mm2 (198.21 inches2 ) Pixel pitch 0.2712 ± 0.0012 x 0.2626 ± 0.0074 mm 0.248 x 0.248 mm Viewing angle: Horizontal 170° typical 90° typical Vertical 160° typical 50° to 65° typical Luminance output 250 cd/m² (typical) 200 cd/m² (typical) Contrast ratio 1000 to 1 (typical) 600 to 1 (typical) Faceplate coating Antiglare with hard- coating 3H Antiglare with hard- coating 3H Backlight LED edgelight system LED light bar system Response Time 5 ms typical (white to black, black to white) 5 ms typical (white to black, black to white) Color Depth 16.7 mil colors 16.7 mil colors Color Gamut 86 % (typical) * 85 % (typical) **
14 About Your Monitor ** E1916HV / E1916HL / E2016HV / E2216HV / E2216HVM color gamut (typical) is based on CIE1976 (85 %) and CIE1931 (72 %) test standards. E2016HL color gamut (typical) is based on CIE1976 (86 %) and CIE1931 (72 %) test standards. Resolution Specifications Model number E1916HV / E1916HL E2016HV / E2016HL E2216HV / E2216HVM Scan range • Horizontal 30 kHz to 83 kHz (automatic) • Vertical 56 Hz to 76 Hz (automatic) Maximum preset resolution 1366 x 768 at 60 Hz 1600 x 900 at 60 Hz 1920 x 1080 at 60 Hz Electrical Specifications Model number E1916HV / E1916HL / E2016HV / E2016HL / E2216HV / E2216HVM Video input signals Analog RGB: 0.7 Volts ± 5 %, 75 ohm input impedance Synchronization input signals Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green) AC input voltage / frequency / current 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.0 A (typical) Inrush current 120 V: 30 A (Max.) 240 V: 60 A (Max.) Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: E1916HV / E1916HL: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 59.9 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+
About Your Monitor 15 VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1366 x 768 47.7 59.8 85.5 +/+ E2016HV / E2016HL: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 59.9 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 900 55.5 60.0 97.8 +/- E2216HV / E2216HVM: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 59.9 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1600 x 900 60.0 60.0 108.0 +/+ VESA, 1920 x 1080 67.5 60.0 148.5 +/+
16 About Your Monitor Physical Characteristics The following table lists the monitor's physical characteristics: Model Number E1916HV / E1916HL E2016HV / E2016HL E2216HV / E2216HVM Connector type 15-pin D-subminiature (Black connector) Signal cable type Analog: D-Sub, 15 pins Dimensions: (with stand) Height 359.0 mm (14.13 inches) 368.9 mm (14.52 inches) 396.7 mm (15.62 inches) Width 445.4 mm (17.54 inches) 471.5 mm (18.56 inches) 512.2 mm (20.17 inches) Depth 167.0 mm (6.57 inches) 167.0 mm (6.57 inches) 180.0 mm (7.09 inches) Dimensions: (without stand) Height 266.0 mm (10.47 inches) 275.4 mm (10.84 inches) 303.7 mm (11.96 inches) Width 445.4 mm (17.54 inches) 471.5 mm (18.56 inches) 512.2 mm (20.17 inches) Depth 51.5 mm (2.03 inches) 51.5 mm (2.03 inches) 50.5 mm (1.99 inches) Stand dimensions: Height 156.0 mm (6.14 inches) 156.0 mm (6.14 inches) 177.0 mm (6.97 inches) Width 220.0 mm (8.66 inches) 220.0 mm (8.66 inches) 250.0 mm (9.84 inches) Depth 167.0 mm (6.57 inches) 167.0 mm (6.57 inches) 180.0 mm (7.09 inches) Weight: Weight with packaging 3.60 kg (7.94 lb) 3.65 kg (8.05 lb) 4.30 kg (9.48 lb) Weight with stand assembly and cables 3.0 kg (6.61 lb) 3.02 kg (6.66 lb) 3.63 kg (8.0 lb) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 2.26 kg (4.98 lb) 2.26 kg (4.98 lb) 2.83 kg (6.24 lb) Weight of stand assembly 0.46 kg (1.01 lb) 0.46 kg (1.01 lb) 0.52 kg (1.15 lb)
About Your Monitor 17 Environmental Characteristics The following table lists the environmental conditions for your monitor: Model Number E1916HV / E1916HL / E2016HV E2016HL E2216HV / E2216HVM Temperature • Operating 0 °C to 40 °C (32 °F to 104 °F) • Non-operating Storage: -20 °C to 60 °C (-4 °F to 140 °F) Shipping: -20 °C to 60 °C (-4 °F to 140 °F) Humidity • Operating 10 % to 80 % (non-condensing) • Non-operating Storage: 5 % to 90 % (non-condensing) Shipping: 5 % to 90 % (non-condensing) Altitude • Operating 5,000 m (16,404 ft) max • Non-operating 12,191 m (40,000 ft) max Thermal dissipation 58.0 BTU/hour (maximum) 47.8 BTU/hour (typical) 64.8 BTU/hour (maximum) 51.2 BTU/hour (typical) 81.9 BTU/hour (maximum) 68.3 BTU/hour (typical)
18 About Your Monitor LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.” In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: http://www.dell.com/support/monitors. Maintenance Guidelines Caring for Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: • To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. • Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics. • If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor. • Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor. • To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Setting Up the Monitor 19 Setting Up the Monitor Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from the factory. 1. Assemble the stand riser to stand base. a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place. 2. Attach the stand assembly to the monitor: a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place.
20 Setting Up the Monitor Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect VGA cable to the corresponding video port on the back of your computer. Connecting VGA Cable NOTE: The graphics are used for the purpose of illustration only. Appearance on the computer may vary. Organizing Your Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment), organize all cables as shown above.
Setting Up the Monitor 21 Removing the Monitor Stand NOTE This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the removal instructions. 1. Remove the VESA Cover. a. Place the monitor panel on a soft cloth or cushion. b. Lft from both side simultaneously, remove the VESA Cover away from the monitor. 2. Remove the stand assembly to the monitor. a. Use a long and thin screwdriver to push the release latch located in a hole just above the stand. b. Once the latch is released, remove the base away from the monitor.
22 Setting Up the Monitor Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA- compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on a stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover. (figure 2) 4. Attach the mounting bracket from the wall mounting kit to the LCD. 5. Mount the LCD on the wall by following the instructions that came with the base mounting kit. NOTE: For use only with UL-listed wall-mount bracket with minimum weight/load bearing capacity of 2.26 kg (E1916HV / E1916HL)/2.26kg (E2016HV / E2016HL)/2.83 kg (E2216HV / E2216HVM).
Operating the Monitor 23 Operating the Monitor Power On the Monitor Press the button to turn on the monitor. Using the Front-Panel Controls Use the keys on the front of the monitor to adjust the image settings. Front-Panel Keys Description A Preset modes Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu. B Brightness /Contrast Use the Brightness / Contrast key to direct access to the "Brightness" and "Contrast" control menu. C Menu Use the Menu key to open the on-screen display (OSD). D Exit Use the Exit key to exit on-screen display (OSD) from menu and sub-menus. Front-Panel Keys Front-Panel Keys Description A Up Use the Up key to adjust (increase ranges) items in the OSD menu.
24 Operating the Monitor B Down Use the Down key to adjust (decrease ranges) items in the OSD menu. C OK Use the OK key to confirm your selection. D Back Use the Back key to go back to the previous menu. Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Press the button to open the OSD menu and display the main menu. Main Menu
Operating the Monitor 25
26 Operating the Monitor 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again. 4. Press the and buttons to select the desired parameter. 5. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes. 6. Select the to return to previous menu without accepting current settings or to accept and return to previous menu. The table below provides a list of all the OSD menu options and their functions. Icon Menu and Submenus Description Energy Use This meter shows the energy level being consumed by the monitor in real time. Brightness/ Contrast Use the Brightness and Contrast menu to adjust the Brightness/ Contrast.
Operating the Monitor 27 Brightness Allows you to adjust the brightness or luminance of the backlight. Press the key to increase brightness and press the key to decrease brightness (min 0 ~ max 100). Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment. Press the key to increase contrast and press the key to decrease contrast (min 0 ~ max 100).
28 Operating the Monitor Auto Adjust Use this key to activate automatic setup and adjust menu.
Operating the Monitor 29 The following dialog appears on a black screen as the monitor self-adjusts to the current input: Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
30 Operating the Monitor Color Use the Color menu to adjust the monitor's color settings.
Operating the Monitor 31 Input Color Format Allows you to set the video input mode to RGB or YPbPr
32 Operating the Monitor Preset Modes Allows you to choose from a list of preset color modes.
Operating the Monitor 33 • Standard: Loads the monitor's default color settings. This is the default preset mode. • Multimedia: Loads color settings ideal for multimedia applications. • Paper: Loads brightness and sharpness settings ideal for viewing text. Blend the text background to simulate paper media without affecting color images. Applies to RGB input format only. • Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint. • Cool: Decreases the color temperature. The screen appears cooler with a blue tint. • Custom Color: Allows you to manually adjust the color settings. Press the and keys to adjust the Red, Green, and Blue values and create your own preset color mode. Reset Color Resets your monitor's color settings to the factory defaults.
34 Operating the Monitor Display Use the Display menu to adjust the monitor's display settings.
Operating the Monitor 35 Aspect Ratio Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM). Horizontal Position Use or the buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Vertical Position Use the or buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). Sharpness This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'. Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use or buttons to adjust for best image quality. Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again. Reset Display Select this option to restore default display settings.
36 Operating the Monitor Energy
Operating the Monitor 37 Power Button LED Allows you to set the power LED indicator on or off during active to save energy. Reset Energy Select this option to restore default Energy settings. Menu Select this option to adjust the settings of the OSD such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
38 Operating the Monitor Language Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese. Transparency Allows you to adjust the OSD background from opaque to transparent. Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds.
Operating the Monitor 39 Lock Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All keys are locked except key. NOTE: When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with 'OSD Lock' pre- selected on entry. Press and hold key for 6 seconds to unlock and allow user access to all applicable settings. Reset Menu Select this option to restore default menu settings. Personalize Selecting this option allows you to set two shortcut keys.
40 Operating the Monitor Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Aspect Ratio" and set as shortcut key.
Operating the Monitor 41
42 Operating the Monitor Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Aspect Ratio" and set as shortcut key.
Operating the Monitor 43 Reset Personaliza- tion Allows you to restore shortcut key to the default setting. Others
44 Operating the Monitor
Operating the Monitor 45 DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color balance etc. Enable (Default): Optimizes the performance of your monitor and provides a better customer experience. Disable: Disables the DDC/CI option and the following message appears on the screen. LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in. NOTE: Use LCD Conditioning only when you experience a problem with image retention. The below warning message appears once user selects “Enable" LCD Conditioning. Reset Other Select this option to restore default other settings, such as DDC/ CI. Factory Reset Resets all OSD settings to the factory preset values.
46 Operating the Monitor OSD Messages When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM).
Operating the Monitor 47 You will see the following message before the DDC/CI function is disabled. When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: If VGA cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 5 minutes if left at this state. See Solving Problems for more information.
48 Operating the Monitor Setting the Maximum Resolution For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) pixels by performing the following steps: In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1. For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the dropdown list of the screen resolution and select 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM). 4. Click OK. In Windows 10: 1. Right-click on the desktop and click Display settings. 2. Click Advanced display settings. 3. Click the dropdown list of Resolution and select 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM). 4. Click Apply. If you do not see 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the provided 1: If you have a Dell desktop or a Dell portable computer with Internet access 2:If you have a non Dell desktop, portable computer, or graphics card
Operating the Monitor 49 If you have a Dell desktop or a Dell portable computer with Internet access 1. Go to http://www.dell.com/support, enter your service tag, and download the latest driver for your graphics 2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) again. NOTE: If you are unable to set the resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM), please contact Dell to inquire about a graphics adapter that supports these resolutions. If you have a non Dell desktop, portable computer, or graphics card In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1. For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Personalization. 3. Click Change Display Settings. 4. Click Advanced Settings. 5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 6. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ). 7. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) again. In Windows 10: 1. Right-click on the desktop and click Display settings. 2. Click Advanced display settings. 3. Click Display adapter properties. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ). 6. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) again. NOTE: If you are unable to set the resolution to 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM), please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1366 x 768 (for E1916HV / E1916HL) or 1600 x 900 (for E2016HV / E2016HL) or 1920 x 1080 (for E2216HV / E2216HVM) .
50 Operating the Monitor Using the Tilt Tilt With the stand assembly, you can tilt the monitor for the most comfortable viewing angle. NOTE: The stand base is detached when the monitor is shipped from the factory.
Troubleshooting 51 Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instruction Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove VGA cables from the back of computer. 3. Turn on the monitor. The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. 4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. The monitor will enter Power Save Mode after 5 minutes if left at this state. 5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
Have a question about the Dell E Series E2016HV but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell E Series E2016HV. Please make sure that you describe your difficulty with the Dell E Series E2016HV as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.
There are no questions about the Dell E Series E2016HV yet.