Dell 7700HD manual

View a manual of the Dell 7700HD below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Video projector
  • Model/name: 7700HD
  • Filetype: PDF
  • Available languages: English, Italian

Table of Contents

Page: 1
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you
make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware
or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property
damage, personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written
permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of
Dell Inc.; DLP and DLP logo are trademarks of TEXAS INSTRUMENTS
INCORPORATED; Microsoft and Windows are either trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Dell Inc. disclaims
any proprietary interest in trademarks and trade names other than its own.
Model 7700FullHD
March 2012 Rev. A00
Page: 2
Contents 3
Contents
1 Your Dell Projector . . . . . . . . . . . . . . . . . . 7
About Your Projector . . . . . . . . . . . . . . . . . 8
2 Connecting Your Projector . . . . . . . . . . . . 10
Installing the Optional Wireless Dongle . . . . . . 11
Connecting to a Computer . . . . . . . . . . . . . . . . 12
Connecting a Computer Using a VGA Cable . . . . 12
Monitor Loop-Through Connection Using
VGA Cables . . . . . . . . . . . . . . . . . . . . . 13
Connecting a Computer Using a RS232 Cable . . . 14
Connecting a Computer by USB Cable . . . . . . . 15
Connecting a Computer Using Wireless Dongle
(Optional) . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a DVD Player . . . . . . . . . . . . . . . . 17
Connecting a DVD Player Using an S-Video Cable . 17
Connecting a DVD Player Using a
Composite Video Cable . . . . . . . . . . . . . . . 18
Connecting a DVD Player Using a
Component Video Cable . . . . . . . . . . . . . . 19
Connecting a DVD Player Using a 3 RCA
Component Video Cable . . . . . . . . . . . . . . 20
Connecting a DVD Player Using an HDMI Cable . . 21
Connecting to Local Area Network . . . . . . . . . . . 22
To project an image and control the projector that is
connected to a network through a RJ45 cable. . . 22
Page: 3
4 Contents
Professional Installation Options: Installation for
Driving Automatic Screen . . . . . . . . . . . . . 23
Connection With Commercial RS232 Control Box . 24
3 Using Your Projector . . . . . . . . . . . . . . . . 25
Turning Your Projector On . . . . . . . . . . . . . . . . 25
Turning Your Projector Off . . . . . . . . . . . . . . . . 25
Adjusting the Projected Image . . . . . . . . . . . . . 26
Raising the Projector Height . . . . . . . . . . . . 26
Lowering the Projector Height . . . . . . . . . . . 26
Adjusting the Projector Zoom and Focus . . . . . . . . 27
Adjusting Projection Image Size . . . . . . . . . . . . 28
Using the Control Panel . . . . . . . . . . . . . . . . . 30
Using the Remote Control . . . . . . . . . . . . . . . . 32
Installing the Remote Control Batteries . . . . . . . . 35
Operating Range With Remote Control . . . . . . . . . 36
Using the On-Screen Display . . . . . . . . . . . . . . 37
INPUT SOURCE . . . . . . . . . . . . . . . . . . . 37
AUTO ADJUST . . . . . . . . . . . . . . . . . . . 38
BRIGHTNESS/CONTRAST . . . . . . . . . . . . . 39
VIDEO MODE . . . . . . . . . . . . . . . . . . . . 39
VOLUME . . . . . . . . . . . . . . . . . . . . . . 40
AUDIO INPUT . . . . . . . . . . . . . . . . . . . . 40
ADVANCED SETTINGS . . . . . . . . . . . . . . . 40
LANGUAGE . . . . . . . . . . . . . . . . . . . . . 54
HELP . . . . . . . . . . . . . . . . . . . . . . . . 54
Page: 4
Contents 5
Wireless Networking Installation . . . . . . . . . . . . 55
Enable Wireless on the Projector . . . . . . . . . . 56
Install the Wireless Application Software on Your
Computer . . . . . . . . . . . . . . . . . . . . . . 58
Launch the Wireless Application . . . . . . . . . . 61
Presentation to Go (PtG) Installation . . . . . . . . . . 65
PtG Viewer . . . . . . . . . . . . . . . . . . . . . 66
Photo Viewer . . . . . . . . . . . . . . . . . . . . 66
PtG/Photo Function Introduction . . . . . . . . . . 67
PtG Overview . . . . . . . . . . . . . . . . . . . . 67
Photo Overview . . . . . . . . . . . . . . . . . . . 68
Buttons-Introduction . . . . . . . . . . . . . . . . 68
Install the PtG Converter Application Software on
Your Computer . . . . . . . . . . . . . . . . . . . 69
Using the PtG Converter . . . . . . . . . . . . . . 70
Audio Projection Installation . . . . . . . . . . . . . . 71
Enable Wireless or LAN on the Projector . . . . . 72
Install the Wireless Application Software on
Your Computer . . . . . . . . . . . . . . . . . . . 73
Launch the Wireless Application . . . . . . . . . . 74
Login . . . . . . . . . . . . . . . . . . . . . . . . 75
Video Stream Installation . . . . . . . . . . . . . . . . 76
Video Stream Support Format . . . . . . . . . . . 76
Enable Wireless or LAN on the Projector . . . . . 77
Install the Wireless Application Software on
Your Computer . . . . . . . . . . . . . . . . . . . 77
Launch the Wireless Application . . . . . . . . . . 77
Login . . . . . . . . . . . . . . . . . . . . . . . . 77
Managing the Projector From Web Management . . . . 78
Configuring the Network Setting . . . . . . . . . . 78
Page: 5
6 Contents
Accessing Web Management . . . . . . . . . . . 78
Make Application Token . . . . . . . . . . . . . . . . 99
4 Troubleshooting Your Projector . . . . . . 101
Guiding Signals . . . . . . . . . . . . . . . . . . . . . 105
Changing the Lamp . . . . . . . . . . . . . . . . . . . 106
5 Specifications . . . . . . . . . . . . . . . . . . . . 108
6 Contacting Dell . . . . . . . . . . . . . . . . . . . 115
7 Appendix: Glossary . . . . . . . . . . . . . . . 116
Page: 6
Your Dell Projector 7
1
Your Dell Projector
Your projector comes with all the items shown below. Ensure that you have all the
items, and contact Dell™ if anything is missing.
Package Contents
Power cable 1.8 m VGA cable (VGA to VGA)
1.8 m USB cable (USB-A to USB-B) Remote control
CD User’s Guide and Documentation AAA Batteries (2)
DOCOMENTATION
DellTM
7700FullHD Projector
Dell
TM
7700FullHD Projector
Quick Setup Guide
Informacion Importante
Dell TM
Pro
jectors
oduct Information Guide
A
A
A
A
A
A
Page: 7
8 Your Dell Projector
About Your Projector
CAUTION: Safety Instructions
1 Do not use the projector near appliances that generate a lot of heat.
2 Do not use the projector in areas where there is an excessive amount of dust. The
dust may cause the system to fail and the projector will automatically shut down.
3 Ensure that the projector is mounted in a well-ventilated area.
4 Do not block the ventilation slots and openings on the projector.
5 Ensure the projector operates between ambient temperatures (5 ºC to 35 ºC).
1 Control panel
2 IR receivers
3 Focus ring
4 Lens
5 Elevator button for height adjustments
6 Lens cap
7 Mounting holes for ceiling mount: Screw hole M3 x 6.5 mm depth.
Recommended torque <8 kgf-cm
8 Mounting hole for tripod: Insert nut 1/4"*20 UNC
9 Lamp cover
10 Tilt adjustment wheel
11 Elevator foot
1
5
2
4
3
6
Top View Bottom View
7
10 10
8
11 9
55.00 55.00
180.50
73.50
8.65
202.50
Page: 8
Your Dell Projector 9
6 Do not try to touch the ventilation outlet as it can become very hot after the
projector has been turned on or immediately after it is turned off.
7 Do not look into the lens while the projector is on as it may cause injury to your
eyes.
8 Do not place any objects near or in front of the projector or cover its lens while the
projector is on as the heat may cause the object to melt or burn.
9 Do not use the wireless projector near cardiac pacemakers.
10 Do not use the wireless projector near medical equipment.
11 Do not use the wireless projector near microwave ovens.
NOTE:
• Do not attempt to ceiling mount the projector yourself. It should be
installed by a qualified technician.
• Recommended Projector Ceiling Mount Kit (P/N: C3505). For more
information, see the Dell Support website at support.dell.com.
• For more information, see the Safety Information that shipped with your
projector.
• The 7700FullHD projector can only be used indoors.
Page: 9
10 Connecting Your Projector
2
Connecting Your Projector
1 WiFi USB (Type A) connector 11 +12 V DC out connector
2 USB Type B connector for USB
Display
12 Security cable slot
3 USB Type A connector for USB
Viewer
13 Component Video input
connector
4 RJ45 connector 14 Power cord connector
5 S-Video connector 15 VGA-A output (monitor loop-
through) connector
6 Composite Video connector 16 VGA-B input (D-sub) connector
7 RS232 (D-sub) connector 17 VGA-A input (D-sub) connector
8 Mini USB (Mini Type B)
connector for remote control
18 HDMI-B connector
9 Audio output connector 19 HDMI-A connector
10 Audio input connector
3 4 5 6 7 8
14 12
1 2
13
9 10
19 15
16
17
18
11
Page: 10
Connecting Your Projector 11
CAUTION: Before you begin any of the procedures in this section, follow the
Safety Instructions as described on page 8.
Installing the Optional Wireless Dongle
Your projector must be installed with a wireless dongle if you want to use the
wireless networking option. Refer to "Wireless Networking Installation" on
page 55. The wireless dongle is not shipped with your projector. You can
purchase it on the Dell website at www.dell.com.
1 Unscrew and take off the wireless cover.
2 Plug in the wireless dongle.
3 Assemble the wireless cover.
Page: 11
12 Connecting Your Projector
Connecting to a Computer
Connecting a Computer Using a VGA Cable
NOTE: The Mini USB cable must be connected if you want to use the Page Up
and Page Down features on the remote control.
NOTE: The Mini USB cable is not shipped with your projector. You can
purchase the Mini USB cable on the Dell website at www.dell.com.
1 Power cord
2 VGA to VGA cable
3 USB-A to Mini USB-B cable
1
2 3
MOLEX
Page: 12
Connecting Your Projector 13
Monitor Loop-Through Connection Using VGA Cables
NOTE: Only one VGA cable is shipped with your projector. An additional VGA
cable can be purchased on the Dell website at www.dell.com.
1 Power cord
2 VGA to VGA cable
1
2
2
Page: 13
14 Connecting Your Projector
Connecting a Computer Using a RS232 Cable
NOTE: The RS232 (9-pin D-sub female to female pin2-3 swap) cable is not
shipped with your projector. Consult a professional installer for the cable and
RS232 remote control software.
1 Power cord
2 RS232 (9-pin D-sub female to female
pin2-3 swap) cable
1
2
Page: 14
Connecting Your Projector 15
Connecting a Computer by USB Cable
NOTE: Plug and Play. Only one USB cable is shipped with your projector. An
additional USB cable can be purchased on the Dell website at www.dell.com.
1 Power cord
2 USB-A to USB-B cable
2
M
O
L
E
X
1
Page: 15
16 Connecting Your Projector
Connecting a Computer Using Wireless Dongle (Optional)
NOTE: Your computer should be equipped with a wireless connector and
properly configured to detect another wireless connection. Refer to your
computer’s documentation on how to configure a wireless connection.
NOTE: Your projector must be installed with a wireless dongle if you want to
use the wireless networking. Refer to "Wireless Networking Installation" on
page 55.
F
C
C
ID
:
SU
Z-
W
U5
20
5C
Page: 16
Connecting Your Projector 17
Connecting a DVD Player
Connecting a DVD Player Using an S-Video Cable
NOTE: The S-Video cable is not shipped with your projector. You can purchase
the S-Video extension (50 ft/100 ft) cable on the Dell website at www.dell.com.
1 Power cord
2 S-Video cable
1
2
Page: 17
18 Connecting Your Projector
Connecting a DVD Player Using a Composite Video Cable
NOTE: The Composite Video cable is not shipped with your projector. You can
purchase the Composite Video Extension (50 ft/100 ft) cable on the Dell website
at www.dell.com.
1 Power cord
2 Composite Video cable
1
2
Page: 18
Connecting Your Projector 19
Connecting a DVD Player Using a Component Video Cable
NOTE: The VGA to Component Video cable is not shipped with your projector.
You can purchase the VGA to Component Video Extension (50 ft/100 ft) cable on
the Dell website at www.dell.com.
1 Power cord
2 VGA to Component Video cable
1
2
Page: 19
20 Connecting Your Projector
Connecting a DVD Player Using a 3 RCA Component Video Cable
NOTE: The 3 RCA to 3 RCA Component Video (Male to Male) cable is not
shipped with your projector. You can purchase the 3 RCA to 3 RCA Component
Video (Male to Male) cable Extension (50 ft/100 ft) cable on the Dell website at
www.dell.com.
1 Power cord
2 3 RCA to 3 RCA Component Video (Male
to Male) cable
1
2
Page: 20
Connecting Your Projector 21
Connecting a DVD Player Using an HDMI Cable
NOTE: The HDMI cable is not shipped with your projector. You can purchase
the HDMI cable on the Dell website at www.dell.com.
1 Power cord
2 HDMI cable
1
2
Page: 21
22 Connecting Your Projector
Connecting to Local Area Network
To project an image and control the projector that is connected to a
network through a RJ45 cable.
NOTE: The RJ45 cable is not shipped with your projector. You can purchase the
RJ45 cable on the Dell website at www.dell.com.
1 Power cord
2 RJ45 cable
1
Local Area Network (LAN)
Page: 22
Connecting Your Projector 23
Professional Installation Options: Installation for Driving Automatic
Screen
NOTE: Use a 12 V DC plug in, 1.7 mm (ID) x 4.00 mm (OD) x 9.5 mm (shaft), to
connect the automatic screen to the projector.
12 V DC Plug
1 Power cord
2 12 V DC Plug
3 Motorized projection screen
1
2
3
Page: 23
24 Connecting Your Projector
Connection With Commercial RS232 Control Box
NOTE: The RS232 (9-pin D-sub female to female pin2-3 swap) cable is not
shipped with your projector. Consult a professional technician to obtain the
cable.
1 Power cord
2 RS232 (9-pin D-sub female to female
pin2-3 swap) cable
3 Commercial RS232 control box
1
2
3
Page: 24
Using Your Projector 25
3
Using Your Projector
Turning Your Projector On
NOTE: Turn on the projector before you turn on the source (computer, DVD
player, etc.). The Power button light blinks blue until pressed.
1 Remove the lens cap.
2 Connect the power cord and appropriate signal cables to the projector. For
information about connecting the projector, see "Connecting Your Projector" on
page 10.
3 Press the Power button (see "Using the Control Panel" on page 30 to locate the
Power button).
4 Turn on your source (computer, DVD player, etc.)
5 Connect your source to the projector using the appropriate cable. See
"Connecting Your Projector" on page 10 for instructions to connect your source to
the projector.
6 By default, the input source of the projector is set to VGA-A. Change the input
source of the projector if necessary.
7 If you have multiple sources connected to the projector, press the Source button
on the remote control or control panel to select the desired source. See "Using the
Control Panel" on page 30 and "Using the Remote Control" on page 32 to locate
the Source button.
Turning Your Projector Off
CAUTION: Unplug the projector after properly shutting down as explained in
the following procedure.
1 Press the Power button. Follow the instruction displayed on screen to properly
turn off the projector.
NOTE: The "Press Power Button to Turn off Projector" message will
appear on the screen. The message disappears after 5 seconds or you can
press the Menu button to clear it.
2 Press the Power button again. The cooling fans continue to operate for 120
seconds.
Page: 25
26 Using Your Projector
3 To power off the projector quickly, press the Power button and hold for 1 second
while the projector’s cooling fans are still running.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4 Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1 Press the Elevator button.
2 Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3 Use the tilt adjustment wheel to fine-tune the display angle.
Lowering the Projector Height
1 Press the Elevator button.
2 Lower the projector, then release the button to lock the elevator foot into
position.
1 Elevator button
2 Elevator foot (Angle of tilt: 0 to 8 degrees)
3 Tilt adjustment wheel
3 3
2
1
Page: 26
Using Your Projector 27
Adjusting the Projector Zoom and Focus
CAUTION: To avoid damaging the projector, ensure that the side door is fully
closed and the elevator foot is fully retracted before moving the projector.
1 Open the side door of the projector.
2 Unlock the lens shift lock, before you adjust the lens shift.
3 Turn the vertical/horizontal lens shift knob to shift the lens.
4 After adjusting the lens shift, lock the lens shift lock.
5 Pull the zoom ring adjustment up and down to zoom in and out.
6 Rotate the focus ring until the image is clear. THe projector focuses at distances
ranging between 3.28 ft to 39.37 ft (1.0 m to 12.0 m).
7 Close the side door of the projector.
1 Side door
2 Vertical lens shift knob
3 Lens shift lock
4 Horizontal lens shift knob
5 Zoom ring
6 Focus ring
2 34 5
1 6
Page: 27
28 Using Your Projector
Adjusting Projection Image Size
244.17"
(620.19 cm
)
199.40"
(506.48 cm
)
156.67"
(397.94 cm
)
111.91"
(284.25 cm
)
69.18"
(175.72 cm
)
20.3"
(51.56 cm)
292.9" (743.97 cm)
239.29" (607.80 cm)
188.01" (477.55 cm)
134.29" (341.10 cm)
83.02" (210.87 cm)
24.42" (62.03 cm)
39.37'
(12.0
m)
32.15'
(9.8
m)
25.26'
(7.7
m)
18.04'
(5.5
m)
11.15'
(3.4
m)
3.28' (1.0 m)
Projector
to
screen
distance
Page: 28
Using Your Projector 29
Desired
Distance (m)
<A>
(Min zoom) (Max zoom)
Screen size Top Screen size Top
Diagonal
(inch)
<B>
W (cm) x
H (cm)
From base to
top of image
(cm)
<C>
Diagonal
(inch)
<B>
W (cm) x
H (cm)
From base to
top of image
(cm)
<C>
1 20.3 45 x 25 29 24.42 54 x 30 35
3.4 69.18 153 x 86 99 83.02 184 x 103 119
5.5 111.91 248 x 139 160 134.29 297 x 167 192
7.7 156.67 347 x 195 224 188.01 416 x 234 269
9.8 199.4 441 x 248 286 239.29 530 x 298 343
12 244.17 541 x 304 350 292.9 649 x 365 420
134.29"
B
C
A
Height:
192 cm
Distance:
5.5 m
Page: 29
30 Using Your Projector
Using the Control Panel
1 LAMP warning light If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 101 and "Guiding Signals" on
page 105.
2 TEMP warning light If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 101 and "Guiding Signals" on
page 105.
3 Power Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 25 and "Turning Your Projector Off" on
page 25.
1 3
6
2
8
11
11
10
10
5
9
4
7
12
12
Page: 30
Using Your Projector 31
4 Volume Control Allows you to increase or decrease the volume.
5 Up / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-30 degrees).
6 Right /
Auto Adjust
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
7 IR Receiver Point the remote control towards the IR receiver
and press a button.
8 Down / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-30 degrees).
9 Menu Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
10 Left / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
11 Enter Press to confirm the selection item.
12 Brightness and
Contrast Control
Allows you to adjust the brightness and contrast
values.
Page: 31
32 Using Your Projector
Using the Remote Control
1 Power Turns the projector on or off. For more information,
see "Turning Your Projector On" on page 25 and
"Turning Your Projector Off" on page 25.
2 Enter Press to confirm the selection.
3 Right Press to navigate through the On-Screen Display
(OSD) Menu items.
4 Down Press to navigate through the On-Screen Display
(OSD) Menu items.
5 Aspect Ratio Press to change the aspect ratio of a displayed image.
1
2
3
4
5
6
7
8
9
19
20
20
18
17
16
15
14
13
11
10
12
Page: 32
Using Your Projector 33
6 Page up Press to move to the previous page.
NOTE: The Mini USB cable must be connected
if you want to use the Page Up feature.
7 Mute Press to mute or un-mute the projector speaker.
8 Page down Press to move to the next page.
NOTE: The Mini USB cable must be connected
if you want to use the Page Down feature.
9 Video mode The projector has preset configurations that are
optimized for displaying data (presentation slides)
or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show the
current display mode. Pressing the Video Mode
button again will switch between modes.
10 Blank screen Press to hide/unhide the image.
11 Up Press to navigate through the On-Screen Display
(OSD) Menu items.
12 Left Press to navigate through the On-Screen Display
(OSD) Menu items.
13 Menu Press to activate the OSD.
14 Volume up Press to increase the volume.
15 Laser Point the remote control at the screen, press and
hold the laser button to activate the laser light.
WARNING: Do not look at the laser point when
it is active. Avoid directing the laser light on
your eyes.
16 Volume down Press to decrease the volume.
17 Keystone adjustment Press to adjust image distortion caused by tilting the
projector (+/-30 degrees).
18 Source Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), HDMI, and S-Video
source.
Page: 33
34 Using Your Projector
19 Auto Adjust Press to synchronize the projector with the input
source. Auto Adjust does not operate if the OSD is
displayed.
20 Keystone adjustment Press to adjust image distortion caused by tilting the
projector (+/-30 degrees).
Page: 34
Using Your Projector 35
Installing the Remote Control Batteries
NOTE: Remove the batteries from the remote control when not in use.
1 Press the tab to lift the battery compartment cover.
2 Check the polarity (+/-) marking on the batteries.
3 Insert the batteries and align their polarity correctly
according to the marking in the battery compartment.
NOTE: Avoid mixing different types of batteries or using
new and old batteries together.
4 Slip the battery cover back.
1
AAA
AAA
2
AAA
AAA
3
4
Page: 35
36 Using Your Projector
Operating Range With Remote Control
NOTE: Actual operating range may slightly differ from the diagram. Weak
batteries will also prevent the remote control from properly operating the
projector.
Operating range
Angle ±30°
Distance 7 m/22.97 feet
Distance
Angle
Angle
Dista
nce
Page: 36
Using Your Projector 37
Using the On-Screen Display
• The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
• Press the Menu button on the control panel or the remote control to enter the
Main Menu.
• To navigate through the tabs in the Main Menu, press the or buttons on
your projector’s control panel or remote control.
• To select a submenu, press the or button on your projector’s control panel
or remote control.
• To select an option, press the or buttons on your projector’s control panel
or remote control. When an item is selected, the color changes to dark blue.
• Use the or buttons on the control panel or remote control to adjust the
settings.
• To go back to the Main Menu, press the button on the control panel or the
remote control.
• To exit the OSD, press the Menu button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector’s input source.
AUTO SOURCE—Press to turn on or off Auto Source mode.
VGA-A—Press to detect a VGA-A signal.
VGA-B—Press to detect a VGA-B signal.
HDMI-A—Press to detect a HDMI-A signal.
HDMI-B—Press to detect a HDMI-B signal.
COMPONENT—Press to detect a RCA Component signal.
COMPOSITE—Press to detect a Composite Video signal.
S-VIDEO—Press to detect a S-Video signal.
Page: 37
38 Using Your Projector
WIRELESS/USB—Press to activate the Input Source Wireless/USB menu.
NOTE: The Wireless/USB can be used after the "Wireless and LAN" option is
turned on.
INPUT SOURCE WIRELESS/USB
The Input Source Wireless/USB menu allows you to activate the Wireless Display,
USB Display, and USB Viewer.
WIRELESS DISPLAY—Press to access the projector's Wireless Guide screen. See
"Wireless Guide screen" on page 57.
USB DISPLAY—Allows you to display the computer/laptop screen to your projector
via the USB cable.
USB VIEWER—Allows you to display photo and PPT files from your USB flash drive.
See "Presentation to Go (PtG) Installation" on page 65.
AUTO ADJUST
Auto Adjust automatically adjusts the projector's Horizontal, Vertical, Frequency,
and Tracking in PC mode.
Page: 38
Using Your Projector 39
BRIGHTNESS/CONTRAST
The Brightness/Contrast menu allows you adjust the brightness/contrast settings
of your projector.
BRIGHTNESS—Use and to adjust the brightness of the image.
CONTRAST—Use and to adjust the display contrast.
NOTE: If you adjust the settings for Brightness and Contrast the projector
automatically switch to Custom mode.
VIDEO MODE
The Video Mode menu allows you to optimize the display image: Presentation,
Bright, Movie, sRGB (provides more accurate color representation), and Custom
(set your preferred settings).
Page: 39
40 Using Your Projector
VOLUME
The Volume menu allows you adjust the volume settings of your projector.
VOLUME—Press to increase the volume and to decrease the volume.
AUDIO INPUT
The Audio Input menu allows you to select your audio input source. The options
are: Analog In, HDMI-A, HDMI-B, and Wireless/LAN.
ADVANCED SETTINGS
The Advanced Settings menu allows you to change settings for Image, Display,
Projector, LAN, Wireless, Menu, Power, PIP
, and Information.
Page: 40
Using Your Projector 41
IMAGE SETTINGS (IN PC MODE)—Select and press to activate image settings.
The image settings menu provides the following options:
COLOR TEMPERATURE—Allows you to adjust the color temperature. The
screen appears cooler at higher color temperatures and warmer at lower
color temperatures. When you adjust the values in the Color Adjust menu,
the Custom mode is activated. The values are saved in the Custom mode.
RGB COLOR ADJUST—Allows you to manually adjust the colors red, green,
and blue.
WHITE INTENSITY—Press and use and to display white intensity.
DYNAMIC APERTURE—Allows you to set the projector dynamic aperture.
The options are: Off, Dynamic, and Auto.
COLOR SPACE—Allows you to select the color space. The options are: RGB,
YCbCr, and YPbPr.
NOTE: If you adjust the settings for Color Temperature, RGB Color Adjust, and
White Intensity the projector automatically switch to Custom mode.
IMAGE SETTINGS (IN VIDEO MODE)—Select and press to activate image settings.
The image settings menu provides the following options:
Page: 41
42 Using Your Projector
COLOR TEMPERATURE—Allows you to adjust the color temperature. The
screen appears cooler at higher color temperatures and warmer at lower
color temperatures. When you adjust the values in the Color Adjust menu,
the Custom mode is activated. The values are saved in the Custom mode.
RGB COLOR ADJUST—Allows you to manually adjust the colors red, green,
and blue.
SATURATION—Allows you to adjust the video source from black and white
to fully saturated color. Press to increase the amount of color in the
image and to decrease the amount of color in the image.
SHARPNESS—Press to increase the sharpness and to decrease the
sharpness.
TINT—Press to increase the amount of green in the image and to
decrease the amount of green in the image (available for NTSC only).
WHITE INTENSITY—Press and use and to display white intensity.
DYNAMIC APERTURE—Allows you to set the projector dynamic aperture.
The options are: Off, Dynamic, and Auto.
COLOR SPACE—Allows you to select the color space. The options are: RGB,
YCbCr, and YPbPr.
NOTE:
1 If you adjust the settings for Color Temperature, RGB Color Adjust,
Saturation, Sharpness, Tint, and White Intensity the projector
automatically switch to Custom mode.
2 Saturation, Sharpness, and Tint are only available when the input source is
from Component, Composite, or S-Video.
Page: 42
Using Your Projector 43
DISPLAY SETTINGS (IN PC MODE)—Select and press to activate display settings.
The display settings menu provides the following options:
HORIZONTAL POSITION—Press to move the image right and to move
the image left.
VERTICAL POSITION—Press to move the image up and to move the
image down.
FREQUENCY—Allows you to change the display data clock frequency to
match the frequency of your computer’s graphics card. If you see a vertical
flickering wave, use the Frequency control to minimize the bars. This is a
coarse adjustment.
TRACKING—Synchronize the phase of the display signal with the graphic
card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
ASPECT RATIO—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
ZOOM—Press and to zoom and view the image.
Adjust the image scale by pressing or
and press to view on your remote control
only.
ZOOM NAVIGATION—Press to activate the Zoom Navigation
menu.
Use to navigate the projection screen.
Page: 43
44 Using Your Projector
DISPLAY SETTINGS (IN VIDEO MODE)—Select and press to activate display
settings. The display settings menu provides the following options:
ASPECT RATIO—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of image projector
according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
ZOOM—Press and to zoom and view the image.
Adjust the image scale by pressing or
and press to view on your remote control
only.
ZOOM NAVIGATION—Press to activate the Zoom Navigation
menu.
Use to navigate the projection screen.
Page: 44
Using Your Projector 45
PROJECTOR SETTINGS—Select and press to activate projector settings. The
projector settings menu provides the following options:
AUTO SOURCE—Select Off (the default) to lock the current input signal. If
you press the Source button when the Auto Source mode is set to Off, you
can manually select the input signal. Select On to auto detect the available
input signals. If you press the Source button when the projector is on, it
automatically finds the next available input signal.
AUTO KEYSTONE—Select On to automatically adjust image distortion
caused by tilting the projector.
HORIZONTAL KEYSTONE—Use and to adjust the image horizontal
keystone.
VERTICAL KEYSTONE—Use and to adjust the image vertical
keystone.
PROJECTOR MODE—Allows you to select the projector mode, depending
upon how the projector is mounted.
•Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
•Rear Projection-Ceiling Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with
a ceiling-mounted projection.
•Front Projection-Desktop — This is the default option.
•Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
SPEAKER—Select On to enable the speaker. Select Off to the disable
speaker.
CLOSED CAPTION—Select On to enable close caption and activate the
closed caption menu. Select appropriate closed caption options: CC1,
CC2, CC3, and CC4.
Page: 45
46 Using Your Projector
NOTE:
1 Closed caption option is available for NTSC only.
2 Closed captioning can only be enabled via S-Video and Composite Video
inputs.
TEST PATTERN—Test Pattern is used to test focus and resolution.
You can enable or disable the Test Pattern by selecting Off, 1, or 2. You can
also invoke the Test Pattern 1 by pressing and holding down and
buttons on the control panel simultaneously for 2 seconds. You can also
invoke the test pattern 2 by pressing and holding down and buttons
on the control panel simultaneously for 2 seconds.
FACTORY RESET—Select and press to reset all settings to its factory
default. The below warning message appears:
Reset items include both computer sources and Video source settings.
Test Pattern 1:
Test Pattern 2:
Page: 46
Using Your Projector 47
LAN SETTINGS—Select and press to activate LAN settings. The LAN settings
menu provides the following options:
WIRELESS AND LAN—Select Enabled to active the Wireless and LAN
function.
DHCP—If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,
and Gateway. Use and to select the number of IP address, Subnet
Mask, and Gateway. Key in enter to confirm each number and then use
and to set the next item.
IP ADDRESS—Automatically or manually assigns the IP address to the
projector connected to the network.
SUBNET MASK—Configure the Subnet Mask of the network connection.
GATEWAY—Check the Gateway address with your network/system
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
STORE—Press to save the changes made in network configuration
settings.
NOTE:
1. Use and buttons to select IP Address, Subnet Mask,
Gateway, DNS, and Store.
2. Press the button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
a Use and buttons to select the option.
b Use and buttons to set the value.
c After the setup is complete, press the button to exit.
Page: 47
48 Using Your Projector
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up,
select Store and press button to store the settings.
4. If you select Store without pressing the Enter button, the system will
keep the original settings.
RESET—Press to reset network configuration.
WIRELESS SETTINGS—Select and press to activate wireless settings. The
wireless settings menu provides the following options:
WIRELESS—Default option is Connected. Select Disconnected to disable
the wireless connection.
NOTE: It is recommended to use the default settings for Wireless
Connect.
DHCP SERVER—Allows you to enable DHCP server of the wireless.
START IP ADDRESS—Automatically or manually assigns the Start IP
address of the DHCP server to the projector connected to the wireless.
END IP ADDRESS—Automatically or manually assigns the End IP address of
the DHCP server to the projector connected to the wireless.
SUBNET MASK—Configure the Subnet Mask of the wireless connection.
GATEWAY—Check the Gateway address with your network/system
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
STORE—Press to save the changes made in wireless configuration
settings.
NOTE:
1. Use and buttons to select IP Address, Subnet Mask,
Gateway, DNS, and Store.
2. Press the button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
Page: 48
Using Your Projector 49
a Use and buttons to select the option.
b Use and buttons to set the value.
c After the setup is complete, press the button to exit.
3. After the IP Address, Subnet Mask, Gateway, and DNS is set up,
select Store and press button to store the settings.
4. If you select Store without pressing the Enter button, the system will
keep the original settings.
RESET—Press to reset wireless configuration.
MENU SETTINGS—Select and press to activate the menu settings. The menu
settings consists of the following options:
MENU POSITION—Allows you to change the position of the OSD menu on
the screen.
MENU TIMEOUT—Allows you to adjust the time for an OSD timeout. By
default, the OSD disappears after 20 seconds of non-activity.
MENU LOCK—Select On to enable the Menu Lock and hide the OSD
menu. Select Off to disable the Menu Lock. If you want to disable the
Menu Lock function and have the OSD disappear, press the Menu button
on the control panel or remote control for 15 seconds, and then disable the
function.
MENU TRANSPARENCY—Select to change the transparency level of the OSD
background.
PASSWORD—When Password Protect is enabled, a Password Protect screen
requesting you to enter a password will be displayed when the power plug is
inserted into the electrical output and the power for the projector is first
turned on. By default, this function is disabled. You can enable this feature
by selecting Enabled. If the password has been set before, key in the
password first and select the function. This password security feature will
Page: 49
50 Using Your Projector
be activated the next time you turn on the projector. If you enable this
feature, you will be asked to enter the projector’s password after you turn
on the projector:
1 First time password input request:
a Go to Menu Settings, press and then select Password to Enabled
the password settings.
b Enabling the Password function will pop up a change screen. Key in a
4-digit number from the screen and press .
c To confirm, enter the password again.
d If the password verification is successful, you may resume with accessing
the projector's functions and its utilities.
2 If you have entered an incorrect password, you will be given another two
chances. After three invalid attempts, the projector will automatically turn
off.
NOTE: If you forget your password, contact DELL™ or a qualified
service personnel.
3 To disable the password function, select the Disabled option to close the
function.
4 To delete the password, select the Deleted option.
Page: 50
Using Your Projector 51
CHANGE PASSWORD—Key in the original password. Then, enter the new
password and confirm the new password again.
POWER SETTINGS—Select and press to activate power settings. The power
settings menu provides the following options:

Question & answers

There are no questions about the Dell 7700HD yet.

Ask a question about the Dell 7700HD

Have a question about the Dell 7700HD but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell 7700HD. Please make sure that you describe your difficulty with the Dell 7700HD as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.