Dell 1201MP manual

View a manual of the Dell 1201MP below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Dell
  • Product: Projector
  • Model/name: 1201MP
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use
of your projector.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of
data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal
injury, or death.
____________________
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.;
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in
trademarks and trade names other than its own.
Model 1201MP
February 2007 Rev. A00
ZZ569`Fohmjti
Page: 2
Contents 3
Contents
1 Your Dell™ Projector
About Your Projector . . . . . . . . . . . . . . . 6
2 Connecting Your Projector
Connecting to a Computer . . . . . . . . . . . . . . 8
Connecting a DVD Player, Set Top Box, VCR, or TV . . . 8
Connecting With a Component Cable . . . . . . . 8
Connecting With an S-Video Cable . . . . . . . . 9
Connecting With a Composite Cable . . . . . . . 9
Connecting to a Wired RS232 Remote Control . . . . . 10
Connecting to a Computer . . . . . . . . . . . . 10
Connecting to a Commercial RS232 Control Box . . 10
3 Using Your Projector
Turning Your Projector On . . . . . . . . . . . . . . . 11
Turning Your Projector Off . . . . . . . . . . . . . . 11
Adjusting the Projected Image . . . . . . . . . . . . 12
Raising the Projector Height . . . . . . . . . . . 12
Lowering the Projector Height . . . . . . . . . . 12
Adjusting Projection Image Size . . . . . . . . . . . 13
ZZ569`Fohmjti
Page: 3
4 Contents
Adjusting the Projector Zoom and Focus . . . . . . . 14
Password Security . . . . . . . . . . . . . . . . . 14
Using the Control Panel . . . . . . . . . . . . . . . 16
Using the Remote Control . . . . . . . . . . . . . . 17
Using the On-Screen Display . . . . . . . . . . . . 18
Main Menu . . . . . . . . . . . . . . . . . . . 19
All Images Menu . . . . . . . . . . . . . . . . 19
Computer Image Menu . . . . . . . . . . . . . 20
Video Image Menu . . . . . . . . . . . . . . . 21
Audio Menu . . . . . . . . . . . . . . . . . . 21
Management Menu . . . . . . . . . . . . . . . 22
Language Menu . . . . . . . . . . . . . . . . 24
Test Pattern Menu . . . . . . . . . . . . . . . 24
Factory Reset Menu . . . . . . . . . . . . . . 24
4 Troubleshooting Your Projector
Changing the Lamp . . . . . . . . . . . . . . . . . 28
5 Specifications
Contacting Dell
Glossary
ZZ569`Fohmjti
Page: 4
Your Dell™ Projector 5
1
Your Dell™ Projector
Your projector comes with all the items shown below. Ensure that you have all the
items, and contact Dell if anything is missing. For more information see,
"Contacting Dell".
Package Contents
Power cable (1.8m) VGA cable (D-sub to D-sub) (1.8m)
Remote control Batteries
Carrying Case Documentation
ZZ569`Fohmjti
Page: 5
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
6 Your Dell™ Projector
About Your Projector
1 Control panel
2 Zoom tab
3 Focus ring
4 Lens
5 Remote control receiver
6 Elevator button
1
2
3
4
5
6
ZZ569`Fohmjti
Page: 6
Connecting Your Projector 7
2
Connecting Your Projector
1 IR receiver
2 VGA out (monitor loop-through)
3 USB connector
4 RS232 connector
5 VGA in (D-sub) connector
6 S-video connector
7 Composite video connector
8 Audio input connector
1 2 3 4 5 6 7 8
ZZ569`Fohmjti
Page: 7
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
8 Connecting Your Projector
Connecting to a Computer
NOTE: The USB cable must be connected if you want to use the Next Page and
Previous Page features on the remote control.
Connecting a DVD Player, Set Top Box, VCR, or TV
Connecting With a Component Cable
1 Power cord
2 VGA to VGA cable
3 USB to USB cable
1 Power cord
2 D-sub to HDTV/Component cable
1
3
2
1
2
ZZ569`Fohmjti
Page: 8
Connecting Your Projector 9
Connecting With an S-Video Cable
Connecting With a Composite Cable
1 Power cord
2 S-video cable
1 Power cord
2 Composite video cable
1
2
1
2
ZZ569`Fohmjti
Page: 9
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
10 Connecting Your Projector
Connecting to a Wired RS232 Remote Control
NOTE: The RS232 cable is not provided by Dell. Consult a professional installer
for the cable and RS232 remote control software.
Connecting to a Computer
Connecting to a Commercial RS232 Control Box
1 Power cord
2 RS232 cable
1 Power cord
2 RS232 cable
3 Commercial RS232 control box
1
2
1
2
3
ZZ569`Fohmjti
Page: 10
Using Your Projector 11
3
Using Your Projector
Turning Your Projector On
NOTE: Turn on the projector before you turn on the source (computer,
notebook, DVD, etc.). The Power button light blinks green until pressed.
1 Remove the lens cap.
2 Connect the power cord and appropriate cables. For information about
connecting the projector, see "Connecting Your Projector" on page 7.
3 Press the Power button (see "About Your Projector" on page 6 to locate the Power
button). The Dell logo displays for 30 seconds.
4 Turn on your source (computer, DVD player, etc.). The projector automatically
detects your source.
NOTE: Allow the projector some time to search for the source.
If the "Searching..." message appears on the screen, ensure that the
appropriate cables are securely connected.
If you have multiple sources connected to the projector, press the Source button
on the remote control or control panel to select the desired source.
Turning Your Projector Off
NOTICE: Unplug the projector after properly shutting down as explained in the
following procedure.
1 Press the Power button twice. The cooling fan continues to operate for 90 seconds.
2 Disconnect the power cord from the electrical outlet and the projector.
NOTE: If you press the Power button while the projector is running, the
following message appears:
" Press Power button to Turn Off Projector.
Projector must cool down for 90 seconds before
unplugging or restarting." The message disappears in 5 seconds or
you can press any button on the control panel to erase it.
ZZ569`Fohmjti
Page: 11
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
12 Using Your Projector
Adjusting the Projected Image
Raising the Projector Height
1 Press the elevator button.
2 Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3 Use the tilt adjustment wheel to fine-tune the display angle; if necessary, press the
side elevator buttons to raise the rear side of the projector to the desired display
angle.
Lowering the Projector Height
1 Press the elevator button.
2 Lower the projector, and then release the button to lock the elevator foot into
position.
1 Elevator button
2 Elevator foot
3 Tilt adjustment wheel
1
2
3
ZZ569`Fohmjti
Page: 12
Using Your Projector 13
Adjusting Projection Image Size
Screen
(Diagonal)
Max. 28.6" (72.6cm) 60.0"(152.4cm) 80.0"(203.2cm) 100.0"(254.0cm) 200.0"(508.0cm) 285.7"(725.7cm)
Min. 24.7"(62.7cm) 51.9"(131.7cm) 69.1"(175.6cm) 86.4"(219.5cm) 172.8"(439.0cm) 246.9"(627.2cm)
Screen
size
Max.
(WxH)
22.9"x17.1" 48.0"x36.0" 64.0"x48.0" 80.0"x60.0" 160.0"x120.0" 228.6"x171.4"
58.1cmx43.5cm 121.9cmx91.4cm 162.6cmx121.9cm 203.2cmx152.4cm 406.4cmx304.8cm 580.6cmx435.4cm
Min.
(WxH)
19.8"x14.8" 41.5"x31.1" 55.3"x41.5" 69.1"x51.9" 138.3"x103.7" 197.5"x148.1"
50.2cmx37.6cm 105.4cmx79.0cm 140.5cmx105.4cm 175.6cmx131.7cm 351.2cmx263.4cm 501.7cmx376.3cm
Distance 3.3ft(1.0m) 6.9ft(2.1m) 9.2ft(2.8m) 11.5ft(3.5m) 23ft(7.0m) 32.8ft(10.0m)
*This graph is for user reference only.
ZZ569`Fohmjti
Page: 13
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
14 Using Your Projector
Adjusting the Projector Zoom and Focus
CAUTION: To avoid damaging the projector, ensure that the zoom lens and
elevator foot are fully retracted before moving the projector or placing the
projector in its carrying case.
1 Rotate the zoom tab to zoom in and out.
2 Rotate the focus ring until the image is clear. The projector focuses at distances
from 3.3ft to 32.8ft (1m to 10m).
3
Password Security
Protect your projector and restrict access to it with the Password Security feature.
This security utility enables you to impose a variety of access restrictions to protect
your privacy and stop others from tampering with your projector. This means that
the projector cannot be used if it is taken without authorization, and thus serves as
a theft-prevention feature.
When Password Protect is enabled (On), a Password Protect screen requesting you
to enter a password will be displayed when the power plug is inserted into the
electrical outlet and the power for the projector is first turned on.
By default, this function is disabled. You can enable this feature using the Password
menu. Refer to section in this manual titled "Management Menu-Password" for
further details. This password security feature is activated the next time you turn
on the projector.
1 Zoom tab
2 Focus ring
2
1
ZZ569`Fohmjti
Page: 14
Using Your Projector 15
If you enable this feature, you have to enter the projector's password after you turn
on the projector:
1 First time password input request:
a Use the directional keys to enter the
password.
b Press the Menu button to confirm.
c If the password verification is successful, you
can resume with accessing the projector's
functions and its utilities.
You are allowed three attempts to enter the
correct password. After the three invalid
attempts, the projector automatically turns
off.
NOTE: If you forget your password, contact
Dell. For more information see, "Contacting
Dell".
ZZ569`Fohmjti
Page: 15
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
16 Using Your Projector
Using the Control Panel
1 Power Turn the projector on and off. For more information,
see "Turning Your Projector On" on page 11 and
"Turning Your Projector Off" on page 11.
2 Source Press to toggle through Analog RGB, Composite,
Component-i, S-video, and Analog YPbPr sources when
multiple sources are connected to the projector.
3 Four Directional
Keys
The four directional keys can be used to
toggle through the tabs in the OSD.
4 TEMP warning light • A solid orange TEMP light indicates that the projector
has overheated. The display automatically shuts
down. Turn the display on again after the projector
cools down. If the problem persists, contact Dell.
• A blinking orange Temp light indicates that a
projector fan has failed and the projector
automatically shuts down. If this problem persists,
contact Dell.
5 LAMP warning light If the Lamp light is solid orange, replace the lamp.
6 Keystone adjustment If your image is not perpendicular to the screen, then it
does not appear square. Press to adjust image distortion
caused by tilting the projector. (±16 degrees)
7 Resync Press to synchronize the projector to the input source. Resync
does not operate if the on-screen display (OSD) is displayed.
8 Menu Press to activate the OSD. Use the directional keys and
the Menu button to navigate through the OSD.
1
2
3
4
5
6
7
8
ZZ569`Fohmjti
Page: 16
Using Your Projector 17
Using the Remote Control
1 Video Mode Press once to show the current display mode.
Press the button again to toggle between PC,
Movie, sRGB, or User mode.
2 Next Page Press to move to the next page.
NOTE: The USB cable must be connected to
use this function.
3 Menu Press to activate the on-screen display (OSD).
Use the directional keys and the Menu button to
navigate through the OSD.
4 4:3/16:9 Press to switch the aspect ratio: 1:1, 16:9, 4:3.
5 Hide button Press to hide the image, press again to display the
image.
6 Volume +/- Press to increase (+) or decrease (-) the volume
or toggle through the OSD tabs.
7 Keystone adjustment If your image is not perpendicular to the screen,
then it does not appear square. Press to adjust
image distortion caused by tilting the projector
(±16 degrees).
1
2
3
4
5
6
7
8
9
10
11
12
ZZ569`Fohmjti
Page: 17
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
18 Using Your Projector
Using the On-Screen Display
The projector has a multi-language On-Screen Display (OSD) that can be
displayed with or without an input source present.
In the Main Menu, press the or !button on the control panel or the S or T
button on the remote control navigate through the tabs. Press the button on
the control panel or the Menu button on the remote control to select a submenu.
In the submenus, press the or !button on the control panel or the S or T
button on the remote control to make a selection. When an item is selected, the
color changes to dark gray. Use the or button on the control panel or the W
or X button on the remote control to make adjustments to a setting.
To exit the OSD, go to the Exit tab and press the button on the control panel
or the Menu button on the remote control.
8 Resync Press to synchronize the projector to the input
source. Resync does not operate if the OSD is
displayed.
9 Source Press to toggle through Analog RGB, Composite,
Component-i, S-video, and Analog YPbPr sources
when multiple sources are connected to the
projector.
10 Directional keys Use the S or T button to select OSD items, use
the W or X button to make adjustments.
11 Previous Page Press to go to the previous page.
NOTE: The USB cable must be connected to
use this function.
12 Power Turn the projector on and off. For more
information, see "Turning Your Projector On" on
page 11 and "Turning Your Projector Off" on
page 11.
ZZ569`Fohmjti
Page: 18
Using Your Projector 19
Main Menu
All Images Menu
BRIGHTNESS—Use the or button on the
control panel or the W or X button on the remote
control to adjust the brightness of the image.
CONTRAST—Use the or button on the
control panel or the W or X button on the remote
control to adjust the degree of difference
between the brightest and darkest parts of the
picture. Adjusting the contrast changes the
amount of black and white in the image.
COLOR TEMP—Adjust the color temperature. The
screen appears bluer at higher temperatures.
The screen appears redder at lower
temperatures.
User mode activates the values in the color
setting menu.
COLOR SETTING—Manually adjust red, green, and blue color.
KEYSTONE—Adjust the image distortion caused by tilting the projector (±16
degrees).
AUTO KEYSTONE—Select Yes to enable the auto correction for vertical image distortion
caused by tilting the projector. To manually adjust the keystone, press the button
on the control panel or the Menu button on the remote control.
ZZ569`Fohmjti
Page: 19
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
20 Using Your Projector
SEMI-AUTO KEYSTONE—Press the button on the control panel or the Menu button
on the remote control to activate the Semi-Auto Keystone correction for image
distortion.
ASPECT RATIO—Select an aspect ratio to adjust how the image appears.
• 1:1 — The input source displays without scaling.
Use 1:1 aspect ratio if you are using one of the following:
– VGA cable and the computer has a resolution less than XGA (1024 x 768)
– Component cable (576p/480i/480p)
– S-Video cable
– Composite cable
• 16:9 — The input source scales to fit the width of the screen.
• 4:3 — The input source scales to fit the screen.
Use 16:9 or 4:3 if you are using one of the following:
– Computer resolution greater than XGA
– Component cable (1080i or 720p)
VIDEO MODE—Select a mode to optimize the display image based on how the
projector is being used: Movie, PC, sRGB (provides more accurate color
representation), and User (set your preferred settings). If you adjust the settings
for White Intensity or Degamma, the projector automatically switches to User.
WHITE INTENSITY—Select 0 to maximize the color reproduction and 10 to maximize
the brightness.
DEGAMMA—Adjust between 1 and 6 to change the color performance of the display.
The default setting is 0.
Computer Image Menu
NOTE: This menu is only available when a computer is connected.
FREQUENCY—Change the display data clock
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to minimize
the bars. This is a coarse adjustment.
TRACKING—Synchronize the phase of the display
signal with the graphics card. If you experience
an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
NOTE: Adjust F
Frequency first and then T
Tracking.
ZZ569`Fohmjti
Page: 20
Using Your Projector 21
HOR. POSITION—Press the button on the control panel or the W button on the
remote control to adjust the horizontal position of the image to the left and press the
button on the control panel or the X button on the remote control to adjust the
horizontal position of the image to the right.
VER. POSITION—Press the button on the control panel or the W button on the
remote control to adjust the vertical position of the image downward and press the
button on the control panel or the X button on the remote control to adjust the
vertical position of the image upward.
Video Image Menu
NOTE: This menu is only available when an S-video or composite video source
is connected.
SATURATION—Press the button on the control
panel or the W button on the remote control to
decrease the amount of color in the image and
press the button on the control panel or the
X button on the remote control to increase the
amount of color in the image.
SHARPNESS—Press the button on the control
panel or the W button on the remote control to
decrease the sharpness and press the button on
the control panel or the X button on the remote control to increase the sharpness.
TINT—Press the button on the control panel or theW button on the remote
control to increase the amount of green in the image and press the button on
the control panel or the X button on the remote control to increase the amount of
red in the image.
Audio Menu
VOLUME—Press the button on the control
panel or the - button on the remote control to
decrease the volume and press the button on
the control panel or the + button on the remote
control to increase the volume.
MUTE—Allows to mute the volume.
ZZ569`Fohmjti
Page: 21
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
22 Using Your Projector
Management Menu
MENU LOCATION—Select the location of the OSD
on the screen.
PROJECTION MODE—Select how the image appears:
• Front Projection-Desktop (the default).
• Rear Projection-Desktop — The projector
reverses the image so you can project from behind
a translucent screen.
• Front Projection-Ceiling Mount — The
projector turns the image upside down for ceiling-
mounted projection.
• Rear Projection-Ceiling Mount — The
projector reverses and turns the image upside
down. You can project from behind a translucent
screen with a ceiling-mounted projection.
SIGNAL TYPE—Manually select the signal type
(RGB, YCbCr, or YPbPr).
LAMP HOUR—Displays the operating hours since the last timer reset.
LAMP RESET—After you install a new lamp, select Yes to reset the lamp timer.
POWER SAVING—Select Yes to set the power saving delay period. The delay period is
the amount of time you want the projector to wait without signal input. After that
set time, the projector enters power saving mode and turns off the lamp. The
projector turns back on when it detects an input signal or you press the Power
button. After two hours, the projector turns off and you need to press the Power
button to turn the projector on.
OSD LOCK—Select On to enable the OSD Lock for hiding the OSD menu. To
display OSD menu, press the button on the control panel or the Menu button
on the remote control for 15 seconds.
AUTO SOURCE—Select On (the default) to auto detect the available input signals.
When the projector is on and you press Source, it automatically finds the next
available input signal. Select Off to lock the current input signal. When Off is
selected and you press Source, you select which input signal you want to use.
ECO MODE—Select On to use the projector at a lower power level (150 Watts),
which may provide longer lamp life, quieter operating, and dimmer luminance
output on the screen. Select Off to operate at normal power level (200 Watts).
OSD TIMEOUT —Use this function to set the duration OSD menu stay active (at idle state).
ZZ569`Fohmjti
Page: 22
Using Your Projector 23
PASSWORD —Select On to enable you to impose a variety of access restrictions to
protect your privacy and stop others from tampering with your projector.
a Press the W button to select On.
• If this setting is set to Off, the Change Password feature will be disabled.
b Set your password with the directional keys and press the Menu button to
confirm.
NOTE: To disable the Password setting, you
must enter the correct password. If the
password verification is successful, the
Password can be set to O
Off.
CHANGE PASSWORD—Use this function to modify
the password to your preference.
a Enter your current password with the
directional keys.
b Set your new password.
c Verify your new password.
d Press the Menu button to confirm.
NOTE: The current Password can only be
reset if the Password setting is set to O
Off.
ZZ569`Fohmjti
Page: 23
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
24 Using Your Projector
Language Menu
Press the or button on the control panel
or the S or T button on the remote control to
select the preferred language for the OSD.
Press the on the control panel or the Menu
button on the remote control to confirm the
language selection.
Test Pattern Menu
Press the button on the control panel or the
Menu button on the remote control to display
the test pattern chart. Use this function to
adjust the focus of the projected screen. Use
the or button on the control panel or the
W or X button on the remote control to exit
from this mode.
Factory Reset Menu
Select Yes to reset the projector to its factory
default settings. Reset items include both
computer image and video image settings.
ZZ569`Fohmjti
Page: 24
Troubleshooting Your Projector 25
4
Troubleshooting Your Projector
If you experience problems with your projector, see the following troubleshooting
tips. If the problem persists, contact Dell. For more information see, "Contacting
Dell."
Problem Possible Solution
No image appears on the
screen
• Ensure that the lens cap is removed and the
projector is turned on.
• Ensure that the external graphics port is
enabled. If you are using a Dell portable
computer, press . For other computers,
see respective documentation.
NOTE: Allow the projector some time to
search for the source.
• Ensure that all the cables are securely
connected. See "Connecting Your Projector" on
page 7.
• Ensure that the pins of the connectors are not
bent or broken.
• Ensure that the lamp is securely installed (see
"Changing the Lamp" on page 28).
ZZ569`Fohmjti
Page: 25
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
26 Troubleshooting Your Projector
Partial, scrolling, or
incorrectly displayed image
1 Press the Resync button on the remote control
or the control panel.
2 If you are using a Dell portable computer, set the
resolution of the computer to XGA (1024 x 768):
a Right-click the unused portion of your
Windows desktop, click Properties and then
select Settings tab.
b Verify the setting is 1024 x 768 pixels for the
external monitor port.
c Press .
If you experience difficulty in changing
resolutions or your monitor freezes, restart all the
equipment and the projector.
If you are not using a Dell portable, see related
documentation.
The screen does not display
your presentation
If you are using a Dell portable computer, press
.
Image is unstable or
flickering
Adjust the tracking in the OSD Computer Image
tab.
Image has vertical
flickering bar
Adjust the frequency in the OSD Computer
Image tab.
Image color is not correct • If your graphic card output signal appears green,
and you would like to display VGA at 60Hz
signal, please go into the OSD select
Management, select Signal Type, and then select
RGB.
Image is out of focus 1 Adjust the focus ring on the projector lens.
2 Ensure that the projection screen is within the
required distance from the projector (3.3ft [1m]
to 32.8ft [10m]).
Problem (continued) Possible Solution (continued)
ZZ569`Fohmjti
Page: 26
Troubleshooting Your Projector 27
LAMP & TEMP indicator information
The image is stretched
when displaying a 16:9
DVD
The projector automatically detects 16:9 DVD
and adjusts the aspect ratio to full screen with a
4:3 (letter-box) default setting. If the image is still
stretched, adjust the aspect ratio as follows:
• If you are playing a 16:9 DVD, select 4:3 aspect
ratio type on your DVD player (if capable).
• If you cannot select 4:3 aspect ratio type on your
DVD player, select 4:3 aspect ratio in the All
Images menu in the OSD.
Image is reversed Select Management from the OSD and adjust the
projection mode.
Lamp is burned out or
makes a popping sound
When the lamp reaches its end of life, it may burn
out and may make a loud popping sound. If this
occurs, the projector does not turn back on, and
displays Lamp Defective in the LCD display
until the lamp is replaced. To replace the lamp,
see "Changing the Lamp" on page 28.
The remote control is not
operating smoothly or in
very limited range
The battery may be low. If so, replace it with 2
new AAA batteries.
OSD display window does
not appear on the screen
after pressing the Menu
button on the remote
control or on the control
panel
Try the following procedures:
1 Press the Menu button on the remote control
or on the control panel for 15 seconds until
OSD pops up.
2 Select Management from the OSD.
3 Set OSD Lock to "Off".
LAMP light is solid orange If the Lamp light is solid orange, replace the lamp.
TEMP light is solid orange The projector has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell.
TEMP light is blinking
orange
A projector fan has failed and the projector
automatically shuts down. If this problem persists,
contact Dell.
Problem (continued) Possible Solution (continued)
ZZ569`Fohmjti
Page: 27
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
28 Troubleshooting Your Projector
Changing the Lamp
Replace the lamp when the message "Lamp is approaching the end of its useful life
in full power operation. Replacement suggested!" appears on the screen. If this
problem persists after replacing the lamp, contact Dell. For more information see,
"Contacting Dell".
CAUTION: The lamp becomes very hot when in use. Do not attempt to replace
the lamp until the projector has been allowed to cool down for at least
30 minutes.
1 Turn off the projector and disconnect the power cord.
2 Let the projector cool for at least 30 minutes.
3 Loosen the two screws that secure the lamp cover and remove the cover.
CAUTION: If the lamp has shattered, be careful as the broken pieces are
sharp and can cause injury. Remove all broken pieces from the projector and
dispose or recycle according to state, local or federal law. Go to
www.dell.com/hg for addtitional information.
4 Loosen the two screws that secure the lamp.
CAUTION: Do not touch the bulb or the
lamp glass at any time. Projector lamps are
very fragile and may shatter if touched.
5 Pull up the lamp by its metal handle.
NOTE: Dell may require that lamps replaced
under warranty be returned to Dell.
6 Replace with the new lamp.
7 Tighten the two screws that secure the lamp.
8 Place the lamp cover and tighten the two
screws.
9 Reset the lamp usage time by selecting Yes for
Lamp Reset icon in the OSD Management tab
(refer to Management Menu in Owner's Manual)/
CAUTION: LAMP(S) INSIDE THIS
PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION,
CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR
LAMP SPECIFIC DISPOSAL INFORMATION, CHECK WWW.LAMPRECYCLE.ORG.
ZZ569`Fohmjti
Page: 28
Specifications 29
5
Specifications
5
Light Valve Single-chip DLP™ DDR
(double data rate) technology
Brightness 2000 ANSI Lumens (Max)
Contrast Ratio 2100:1 Typical (Full On/Full Off)
Uniformity 80% Typical (Japan Standard - JBMA)
Lamp 200-watt user-replaceable UHP 2500-
hour lamp(up to 3000 hours in
eco mode)
Number of Pixels 800 x 600 (SVGA)
Displayable Color 16.7M colors
Color Wheel Speed 100~127.5Hz (2X)
Projection Lens F/2.4-2.58, f=19~21.9mm with 1.15x
manual zoom lens
Projection Screen Size 28.57-285.7 inches (diagonal)
Projection Distance 3.3~32.8 ft (1m~10m)
Video Compatibility NTSC, NTSC 4.43, PAL, PAL-M, PAL-
N, SECAM, and HDTV (1080i, 720P
,
576i/P
, 480i/P) compatibility
Composite video, Component video
and S-video capability
H. Frequency 31kHz-79kHz (Analog)
V. Frequency 50Hz-85Hz (Analog)
Power Supply Universal 100-240V AC 50-60Hz with
PFC input
Power Consumption 250 Watts full power (typical),
200 Watts in eco mode
ZZ569`Fohmjti
Page: 29
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
30 Specifications
Audio 1 speaker, 2 Watts RMS
Noise Level 36dB(A) Full-on mode,
33dB(A) Eco-mode
Weight 2.24kg (4.94 lbs)
Dimensions (W x H x D) External 9.9 x 3.96 x 8.4 ± 0.04 inches
(251 x 101 x 213 ± 1mm)
Environmental Operating temperature: 5o
C–35o
C
(41oF–95oF)
Humidity: 80% maximum
Storage temperature: –20o
C to 60o
C
(–4o
F to 140o
F)
Humidity: 80% maximum
Regulatory FCC, CE, VCCI, UL, cUL,
Nemko-GS, ICES-003, MIC, C-Tick,
GOST, CCC, Safety Mark, NOM,
SABS, PSE-Circle, EK
I/O Connectors Power: AC power input socket
Computer input: one D-sub for
analog/component, HDTV input
signals
Computer output: one 15-pin D-sub
Video input: one composite video RCA
and one S-video
USB input: one USB connector
Audio input: one phone jack (diameter
3.5mm)
One mini-DIN RS232 for wired remote
projector control from PC
ZZ569`Fohmjti
Page: 30
Specifications 31
RS232 Pin Assignment
RS232 Protocol
• Communication Settings
• Control command Syntax (From PC to Projector)
[H][AC][SoP][CRC][ID][SoM][COMMAND]
• Example: power on the projector
Enter the following code: 0xBE 0xEF 0x10 0x05 0x00 0xC6 0xFF 0x11
0x11 0x01 0x00 0x01
NOTE: Send least significant bytes first.
Connection settings Value
Baud Rate: 19200
Data Bits: 8
Parity None
Stop Bits 1
ZZ569`Fohmjti
Page: 31
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
32 Specifications
• Control Commands List
Control
Commands
List
Address
Code
(BYTE)
Size of the
Payload
(WORD)
CRC16 for
the entire
packet
(WORD)
MsG ID
(WORD)
MsG size
(WORD)
Command
code
(BYTE)
Command Description
0xefbe 0x10 0x0005 0xffc6 0x1111 0x0001 0x01 Power on
0xbfc7 0x02 Menu
0x7e07 0x03 Up
0x3fc5 0x04 Down
0xfe05 0x05 Left
0xbe04 0x06 Right
0x7fc4 0x07 Resync
0x3fc0 0x08 Source
0xfe00 0x09 Volume+
0xbe01 0x0a Volume-
0xffc3 0x0d Mute
0x7e02 0x0f Hide
0x3fca 0x10 Video Mode
0x7fcb 0x13 V. Keystone Up
0x3e09 0x14 V. Keystone Down
0x7e08 0x17 Aspect ratio
(4:3/16:9)
0x3e0c 0x18 Power OFF
0xffcc 0x19 Source-VGA
0xbfcd 0x1a Source-VGA YPbPr
(480p/576p/720p/
1080i)
0x7e0d 0x1b Source-VGA YCbCr
(480i/576i)
0xbe1f 0x22 Source-S-Video
0x7fdf 0x23 Source-Composite
0xbfd9 0x2a ECO Mode ON
0x7e19 0x2b ECO Mode OFF
0x3fdb 0x2c Auto Source ON
0xfe1b 0x2d Auto Source OFF
0xbe1a 0x2e Factory Reset
0x7fda 0x2f Lamp Hour
0x3e12 0x30 Firmware Version
0x7e46 0xff System Status
ZZ569`Fohmjti
Page: 34
Contacting Dell 35
Contacting Dell
You can contact Dell through the Internet and by phone:
• For support through the web, go to support.dell.com.
• For worldwide support through the web, use the Choose A
Country/Region menu near the bottom of the page, or see the web
addresses listed in the following table.
• For support by e-mail, see the e-mail addresses listed in the following
table.
NOTE: Toll-free numbers are for use within the country for which they are
listed.
NOTE: In certain countries, support specific to Dell™ XPS™ computers is
available at a separate telephone number listed for participating countries. If
you do not see a telephone number listed that is specific for XPS computers,
you may contact Dell through the support number listed and your call will be
routed appropriately.
• For support by phone, use the phone numbers and codes provided in
the following table. If you need assistance in determining which codes
to use, contact a local or an international operator.
NOTE: The contact information provided was deemed correct at the time that
this document went to print and is subject to change.
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
Anguilla Online Support www.dell.com/ai
E-mail Address la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 800-335-0031
Antigua and Barbuda Online Support www.dell.com.ag
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-800-805-5924
ZZ569`Fohmjti
Page: 35
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
36 Contacting Dell
Aomen
Country Code: 853
Technical Support toll-free: 0800-105
Customer Service
(Xiamen, China)
34 160 910
Transaction Sales
(Xiamen, China)
29 693 115
Argentina (Buenos
Aires)
International Access
Code: 00
Country Code: 54
City Code: 11
Online Support www.dell.com.ar
E-mail for Desktops and
Portables
la-techsupport@dell.com
E-mail for Servers and
EMC®
Storage Products
la_enterprise@dell.com
Customer Service toll-free: 0-800-444-0730
Technical Support – Dell
PowerApp™, Dell
PowerEdge™, Dell
PowerConnect™, and
Dell PowerVault™
toll-free: 0-800-222-0154
Technical Support
Services
toll-free: 0-800-444-0724
Sales 0-810-444-3355
Aruba Online Support www.dell.com.aw
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 800-1578
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 36
Contacting Dell 37
Australia (Sydney)
International Access
Code: 0011
Country Code: 61
City Code: 2
Online Support support.ap.dell.com
support.ap.dell.com/contactus
Technical Support
Technical Support for
XPS computers only
toll-free: 1300 790 877
Home and Home Office toll-free: 1300-655-533
Medium and Large
Business
toll-free: 1800-633-559
Small Business,
Education, Local
Government
toll-free: 1800-060-889
Customer Service toll-free: 1300-662-196
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 37
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
38 Contacting Dell
Austria (Vienna)
International Access
Code: 900
Country Code: 43
City Code: 1
Online Support support.euro.dell.com
tech_support_central_europe
@dell.com
Technical Support for
XPS computers only
08 20 24 05 30 81
Home/Small Business
Sales
08 20 24 05 30 00
Home/Small Business
Fax
08 20 24 05 30 49
Home/Small Business
Customer Service
08 20 24 05 30 14
Home/Small Business
Support
08 20 24 05 30 17
Preferred
Accounts/Corporate
Customer Service
08 20 24 05 30 16
Preferred
Accounts/Corporate
Support
08 20 24 05 30 17
Switchboard 08 20 24 05 30 00
Bahamas Online Support www.dell.com/bs
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 1-866-874-3038
Barbados Online Support www.dell.com/bb
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-800-534-3142
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 38
Contacting Dell 39
Belgium (Brussels)
International Access
Code: 00
Country Code: 32
City Code: 2
Online Support support.euro.dell.com
Technical Support for
XPS computers only
02 481 92 96
General Support 02 481 92 88
General Support Fax 02 481 92 95
Customer Service 02 713 15 65
Corporate Sales 02 481 91 00
Fax 02 481 92 99
Switchboard 02 481 91 00
Bermuda Online Support www.dell.com/bm
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-877-890-0751
Bolivia Online Support www.dell.com/bo
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 800-10-0238
Brazil
International Access
Code: 00
Country Code: 55
City Code: 51
Online Support www.dell.com/br
BR_TechSupport@dell.com
Customer Service and
Tech Support
0800 970 3355
Technical Support Fax 51 2104 5470
Customer Service Fax 51 2104 5480
Sales 0800 970 3390
British Virgin Islands Technical Support,
Customer Service, Sales
toll-free: 1-866-278-6820
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 39
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
40 Contacting Dell
Brunei
Country Code: 673
Technical Support
(Penang, Malaysia)
604 633 4966
Customer Service
(Penang, Malaysia)
604 633 3101
or toll-free: 801 1012
Transaction Sales
(Penang, Malaysia)
604 633 3101
or toll-free: 801 1012
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 40
Contacting Dell 41
Canada (North York,
Ontario)
International Access
Code: 011
Online Order Status www.dell.ca/ostatus
Online Support support.ca.dell.com
AutoTech (automated
Hardware and Warranty
Support)
toll-free: 1-800-247-9362
Customer Service
Home/Home Office toll-free: 1-800-847-4096
Small Business toll-free: 1-800-906-3355
Medium/Large Business,
Government, Education
toll-free: 1-800-387-5757
Hardware Warranty
Phone Support
XPS Computers Only toll-free: 1-866-398-8977
Computers for
Home/Home Office
toll-free: 1-800-847-4096
Computers for
Small/Medium/Large
Business, Government
toll-free: 1-800-387-5757
Printers, Projectors,
Televisions, Handheld,
Digital Jukebox, and
Wireless
1-877-335-5767
Sales
Home and Home Office
Sales
toll-free: 1-800-999-3355
Small Business toll-free: 1-800-387-5752
Medium/Large Business,
Government
toll-free: 1-800-387-5755
Spare Parts and
Extended Service
1 866 440 3355
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 41
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
42 Contacting Dell
Cayman Islands Online Support la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-877-262-5415
Chile (Santiago)
Country Code: 56
City Code: 2
Online Support www.dell.com/cl
la-techsupport@dell.com
Sales and Customer
Support
toll-free: 1230-020-3397
or 800-20-1385
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 42
Contacting Dell 43
China (Xiamen)
Country Code: 86
City Code: 592
Online Support support.dell.com.cn
Technical Support E-
mail
support.dell.com.cn/email
Customer Service E-mail customer_cn@dell.com
Technical Support Fax 592 818 1350
Technical Support – XPS
computers only
toll-free: 800 858 0540
Technical Support –
Dell™ Dimension™ and
Dell Inspiron™
toll-free: 800 858 2969
Technical Support – Dell
OptiPlex™, Dell
Latitude™, and Dell
Precision™
toll-free: 800 858 0950
Technical Support –
Servers and Storage
toll-free: 800 858 0960
Technical Support –
Projectors, PDAs,
Switches, Routers, etc.
toll-free: 800 858 2920
Technical Support –
Printers
toll-free: 800 858 2311
Customer Service toll-free: 800 858 2060
Customer Service Fax 592 818 1308
Home and Small
Business
toll-free: 800 858 2222
Preferred Accounts
Division
toll-free: 800 858 2557
Large Corporate
Accounts GCP
toll-free: 800 858 2055
Large Corporate
Accounts Key Accounts
toll-free: 800 858 2628
Large Corporate
Accounts North
toll-free: 800 858 2999
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 43
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
44 Contacting Dell
Colombia Online Support www.dell.com/co
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
01-800-915-4755
Costa Rica Online Support www.dell.com/cr
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
0800-012-0231
Czech Republic
(Prague)
International Access
Code: 00
Country Code: 420
Online Support support.euro.dell.com
czech_dell@dell.com
Technical Support 22537 2727
Customer Service 22537 2707
Fax 22537 2714
Technical Fax 22537 2728
Switchboard 22537 2711
Denmark
(Copenhagen)
International Access
Code: 00
Country Code: 45
Online Support support.euro.dell.com
Technical Support for
XPS computers only
7010 0074
Technical Support 7023 0182
Customer Service –
Relational
7023 0184
Home/Small Business
Customer Service
3287 5505
Switchboard – Relational 3287 1200
Switchboard Fax –
Relational
3287 1201
Switchboard –
Home/Small Business
3287 5000
Switchboard Fax –
Home/Small Business
3287 5001
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 44
Contacting Dell 45
Dominica Online Support www.dell.com/dm
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 1-866-278-6821
Dominican Republic Online Support www.dell.com/do
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-800-156-1588
Ecuador Online Support www.dell.com/ec
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
(calling from Quito)
toll-free: 999-119-877-655-3355
Technical Support,
Customer Service, Sales
(calling from Guayaquil)
toll-free: 1800-999-119-877-
655-3355
El Salvador Online Support www.dell.com/sv
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
800-6132
Finland (Helsinki)
International Access
Code: 990
Country Code: 358
City Code: 9
Online Support support.euro.dell.com
fi_support@dell.com
Technical Support 0207 533 555
Customer Service 0207 533 538
Switchboard 0207 533 533
Fax 0207 533 530
Sales under 500
employees
0207 533 540
Sales over 500 employees 0207 533 533
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 45
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
46 Contacting Dell
France (Paris)
(Montpellier)
International Access
Code: 00
Country Code: 33
City Codes: (1) (4)
Online Support support.euro.dell.com
Technical Support for
XPS computers only
0825 387 129
Home and Small
Business
Technical Support 0825 387 270
Customer Service 0825 823 833
Switchboard 0825 004 700
Switchboard (calls from
outside of France)
04 99 75 40 00
Sales 0825 004 700
Fax 0825 004 701
Fax (calls from outside
of France)
04 99 75 40 01
Corporate
Technical Support 0825 004 719
Customer Service 0825 338 339
Switchboard 01 55 94 71 00
Sales 01 55 94 71 00
Fax 01 55 94 71 01
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 46
Contacting Dell 47
Germany (Frankfurt)
International Access
Code: 00
Country Code: 49
City Code: 69
Online Support support.euro.dell.com
tech_support_central_europe
@dell.com
Technical Support for
XPS computers only
069 9792 7222
Technical Support 069 9792-7200
Home/Small Business
Customer Service
0180-5-224400
Global Segment
Customer Service
069 9792-7320
Preferred Accounts
Customer Service
069 9792-7320
Large Accounts
Customer Service
069 9792-7320
Public Accounts
Customer Service
069 9792-7320
Switchboard 069 9792-7000
Greece
International Access
Code: 00
Country Code: 30
Online Support support.euro.dell.com
Technical Support 00800-44 14 95 18
Gold Service Technical
Support
00800-44 14 00 83
Switchboard 2108129810
Gold Service
Switchboard
2108129811
Sales 2108129800
Fax 2108129812
Grenada Online Support www.dell.com/gd
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 1-866-540-3355
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 47
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
48 Contacting Dell
Guatemala Online Support www.dell.com/gt
la-techsupport@dell.com
Technical Support,
Customer Service, Sales
1-800-999-0136
Guyana Online Support la-techsupport@dell.com
Technical Support,
Customer Service, Sales
toll-free: 1-877-270-4609
Hong Kong
International Access
Code: 001
Country Code: 852
Online Support support.ap.dell.com
support.dell.com.cn/email
Technical Support – XPS
computers only
00852-3416 6923
Technical Support –
Dimension and Inspiron
00852-2969 3188
Technical Support –
OptiPlex, Latitude, and
Dell Precision
00852-2969 3191
Technical Support –
Servers and Storage
00852-2969 3196
Technical Support –
Projectors, PDAs,
Switches, Routers, etc.
00852-3416 0906
Customer Service 00852-3416 0910
Large Corporate
Accounts
00852-3416 0907
Global Customer
Programs
00852-3416 0908
Medium Business
Division
00852-3416 0912
Home and Small
Business Division
00852-2969 3105
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 48
Contacting Dell 49
India Online Support support.ap.dell.com
Portable and Desktop
Support
Desktop Support E-mail india_support_desktop@dell.c
om
Portable Support E-mail india_support_notebook@dell
.com
Phone Numbers 080-25068032 or 080-25068034
or your city STD code +
60003355
or toll-free: 1-800-425-8045
Server Support
E-mail india_support_Server@dell.co
m
Phone Numbers 080-25068032 or 080-25068034
or your city STD code +
60003355
or toll-free: 1800 425 8045
Gold Support Only
E-mail eec_ap@dell.com
Phone Numbers 080-25068033
or your city STD code +
60003355
or toll-free: 1-800-425-9045
XPS Support Only
E-mail Indiaxps_AP@dell.com
Phone Numbers 080-25068066
or toll-free: 1-800-425-2066
Customer Service
Home and Small
Business
India_care_HSB@dell.com
toll-free: 1800-4254051
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 49
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
50 Contacting Dell
Ireland
(Cherrywood)
International Access
Code: 00
Country Code: 353
City Code: 1
Online Support support.euro.dell.com
dell_direct_support@dell.com
Technical Support
XPS computers only 1850 200 722
Business computers 1850 543 543
Home computers 1850 543 543
At Home Support 1850 200 889
Sales
Home 1850 333 200
Small Business 1850 664 656
Medium Business 1850 200 646
Large Business 1850 200 646
Sales E-mail Dell_IRL_Outlet@dell.com
Customer Service
Home and Small
Business
01 204 4014
Business (greater than
200 employees)
1850 200 982
General
Fax/Sales Fax 01 204 0103
Switchboard 01 204 4444
U.K. Customer Service
(dial within U.K. only)
0870 906 0010
Corporate Customer
Service (dial within U.K.
only)
0870 907 4499
U.K. Sales (dial within
U.K. only)
0870 907 4000
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 50
Contacting Dell 51
Italy (Milan)
International Access
Code: 00
Country Code: 39
City Code: 02
Online Support support.euro.dell.com
Home and Small
Business
Technical Support 02 577 826 90
Customer Service 02 696 821 14
Fax 02 696 821 13
Switchboard 02 696 821 12
Corporate
Technical Support 02 577 826 90
Customer Service 02 577 825 55
Fax 02 575 035 30
Switchboard 02 577 821
Jamaica Online Support la-techsupport@dell.com
Technical Support,
Customer Service, Sales
(dial from within
Jamaica only)
1-800-440-9205
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 51
w
w
w
.
d
e
l
l
.
c
o
m
|
s
u
p
p
o
r
t
.
d
e
l
l
.
c
o
m
52 Contacting Dell
Japan (Kawasaki)
International Access
Code: 001
Country Code: 81
City Code: 44
Online Support support.jp.dell.com
Technical Support – XPS
computers only
toll-free: 0120-937-786
Technical Support
outside of Japan – XPS
computers only
81-44-520-1235
Technical Support –
Dimension and Inspiron
toll-free: 0120-198-226
Technical Support
outside of Japan –
Dimension and Inspiron
81-44-520-1435
Technical Support – Dell
Precision, OptiPlex, and
Latitude
toll-free: 0120-198-433
Technical Support
outside of Japan – Dell
Precision, OptiPlex, and
Latitude
81-44-556-3894
Technical Support – Dell
PowerApp, Dell
PowerEdge, Dell
PowerConnect, and Dell
PowerVault
toll-free: 0120-198-498
Technical Support
outside of Japan –
PowerApp, PowerEdge,
PowerConnect, and
PowerVault
81-44-556-4162
Technical Support –
Projectors, PDAs,
Printers, Routers
toll-free: 0120-981-690
Technical Support
outside of Japan –
Projectors, PDAs,
Printers, Routers
81-44-556-3468
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti
Page: 52
Contacting Dell 53
Korea (Seoul)
International Access
Code: 001
Country Code: 82
City Code: 2
Online Support support.ap.dell.com
Technical Support for
XPS computers only
toll-free: 080-999-0283
Technical Support,
Customer Service
toll-free: 080-200-3800
Technical Support –
Dimension, PDA,
Electronics, and
Accessories
toll-free: 080-200-3801
Sales toll-free: 080-200-3600
Fax 2194-6202
Switchboard 2194-6000
Latin America Customer Technical
Support (Austin, Texas,
U.S.A.)
512 728-4093
Customer Service
(Austin, Texas, U.S.A.)
512 728-3619
Fax (Technical Support
and Customer Service)
(Austin, Texas, U.S.A.)
512 728-3883
Sales (Austin, Texas,
U.S.A.)
512 728-4397
Sales Fax (Austin, Texas,
U.S.A.)
512 728-4600
or 512 728-3772
Luxembourg
International Access
Code: 00
Country Code: 352
Online Support support.euro.dell.com
Support 342 08 08 075
Home/Small Business
Sales
+32 (0)2 713 15 96
Corporate Sales 26 25 77 81
Customer Service +32 (0)2 481 91 19
Fax 26 25 77 82
Country (City)
International Access
Code Country Code
City Code
Service Type Area Codes,
Local Numbers, and
Toll-Free Numbers
Web and E-mail Address
ZZ569`Fohmjti

Question & answers

There are no questions about the Dell 1201MP yet.

Ask a question about the Dell 1201MP

Have a question about the Dell 1201MP but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Dell 1201MP. Please make sure that you describe your difficulty with the Dell 1201MP as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.