Cylinda K2385VE manual

Elektroskandia Sverige AB, Cylinda, 191 83 Sollentua Service Vi har service i hela Sverige/ Nationwide service in Sweden Besök www.cylinda.se / Visit www.cylinda.se Ring 0771-25 25 00 (endast lokaltaxa) / Call 0771-25 25 00 Uppge / Declare Maskintyp / Model code Serienummer / Serial number Inköpsdatum / Purchase date Problembeskrivning / Problem description Namn och adress / Name and address Ditt telefonnummer / Phone number Kontakta oss / Contact us www.cylinda.se Bruksanvisning User manual K2385NBVE K2385VE K2385HE K2385NBHE K2385RFHE K2385HF K2385VF K2385RFHF

EN - 19 Thank you for choosing this product. This user manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this user manual before using your appliance and keep this book for future reference. Icon Type Meaning WARNING Serious injury or death risk RISK OF ELECTRIC SHOCK Dangerous voltage risk FIRE Warning; Risk of fire / flammable materials CAUTION Injury or property damage risk IMPORTANT Operating the system correctly

EN - 20 CONTENTS 1 SAFETY INSTRUCTIONS..............................................................................21 1.1 General Safety Warnings..............................................................................................21 1.2 Installation warnings......................................................................................................25 1.3 During Usage................................................................................................................25 2  DESCRIPTION OF THE APPLIANCE...........................................................27 3 USING THE APPLIANCE...............................................................................27 3.1 Information on No-Frost technology..............................................................................27 3.2 Display and Control Panel.............................................................................................27 3.3 Operating your Fridge...................................................................................................28 3.3.1 Fridge Temperature Set Button..................................................................................28 3.3.2 Alarm symbol (Alarm LED).........................................................................................28 3.3.3 Super Cooling Mode...................................................................................................28 3.3.4 Fridge Temperature Settings......................................................................................28 3.4 Temperature Settings Warnings....................................................................................28 3.4.1 Stand-By Mode...........................................................................................................29 3.5 Accessories...................................................................................................................29 3.5.1 The Bottle Holder (In some models).........................................................................29 3.5.2 The Storage Box.........................................................................................................29 3.5.3 The Fresh Dial (In some models).............................................................................30 3.5.4  Adjustable Door Shelf (In some models)..................................................................30 3.5.5  Adjustable Glass Shelf (In some models).................................................................30 4 FOOD STORAGE............................................................................................31 4.1 Refrigerator Compartment.............................................................................................31 5 CLEANING AND MAINTENANCE.................................................................32 5.1 Defrosting......................................................................................................................32 6 SHIPMENT AND REPOSITIONING...............................................................33 6.1  Transportation and Changing Positioning.....................................................................33 6.2 Repositioning the Door..................................................................................................33 7  BEFORE CALLING AFTER-SALES SERVICE............................................ 33 8 TIPS FOR SAVING ENERGY.........................................................................35 9 TECHNICAL DATA..........................................................................................35 10  INFORMATION FOR TEST INSTITUTES...................................................35 11  CUSTOMER CARE AND SERVICE.............................................................35

EN - 21 1 SAFETY INSTRUCTIONS 1.1 General Safety Warnings Read this user manual carefully. WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING: Do not damage the refrigerant circuit. WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged. WARNING: Do not locate multiple portable socket- outlets or portable power supplies at the rear of the appliance. WARNING: In order to avoid any hazards resulting from the instability of the appliance, it must be fixed in accordance with the instructions. If your appliance uses R600a as a refrigerant (this information will be provided on the label of the cooler) you should take care during transportation and installation to prevent the cooler elements from being damaged. R600a is an environmentally friendly and

EN - 22 natural gas, but it is explosive. In the event of a leak due to damage of the cooler elements, move your fridge away from open flames or heat sources and ventilate the room where the appliance is located for a few minutes. • While carrying and positioning the fridge, do not damage the cooler gas circuit. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • This appliance is intended to be used in household and domestic applications such as: – – staff kitchen areas in shops, offices and other working environments. – – farm houses and by clients in hotels, motels and other residential type environments. – – bed and breakfast type environments; – – catering and similar non-retail applications. • If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, a service agent or similarly qualified persons in order to avoid a hazard. • A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 10 amperes. If there is no such socket in your house, please have one installed by an authorised electrician.

EN - 23 • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance, very young children (0-3 years old) are not expected to use appliances, young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction concerning use of the appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given. • If the supply cord is damaged, it must be replaced by the manufacturer, an authorised service agent or similar qualified persons, in order to avoid a hazard. • This appliance is not intended for use at altitudes exceeding 2000 m.

EN - 24 To avoid contamination of food, please respect the following instructions: • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance. • Clean regularly surfaces that can come in contact with food and accessible drainage systems • Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food. • Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes. • One-, two- and three-star compartments are not suitable for the freezing of fresh food. • If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

EN - 25 1.2 Installation warnings Before using your fridge for the first time, please pay attention to the following points: • The operating voltage for your fridge is 220-240 V at 50Hz. • The plug must be accessible after installation. • Your fridge may have an odour when it is operated for the first time. This is normal and the odour will fade when your fridge starts to cool. • Before connecting your fridge, ensure that the information on the data plate (voltage and connected load) matches that of the mains electricity supply. If in doubt, consult a qualified electrician. • Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we recommend you consult a qualified electrician for assistance. • The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the operating point must match with the details on the name plate of the appliance (the name plate is located on the inside left of the appliance). • We do not accept responsibility for any damages that occur due to ungrounded usage. • Place your fridge where it will not be exposed to direct sunlight. • Your fridge must never be used outdoors or exposed to rain. • Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores, and at least 5 cm away from electrical ovens. • If your fridge is placed next to a deep freezer, there must be at least 2 cm between them to prevent humidity forming on the outer surface. • Do not cover the body or top of fridge with lace. This will affect the performance of your fridge. • Clearance of at least 50 cm is required at the top of your appliance. Do not place anything on top of your appliance. • Do not place heavy items on the appliance. • Clean the appliance thoroughly before use (see Cleaning and Maintenance). • Before using your fridge, wipe all parts with a solution of warm water and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge after cleaning. • Use the adjustable front legs to make sure your appliance is level and stable. You can adjust the legs by turning them in either direction. This must be done before placing food in the appliance. • Install the two plastic distance guides (the parts on the black vanes -condenser- at the rear) by turning it 90° (as shown in the figure) to prevent the condenser from touching the wall. • The distance between the appliance and back wall must be a maximum of 75 mm. 1.3 During Usage • Do not connect your fridge to the mains electricity supply using an extension lead. • Do not use damaged, torn or old plugs. • Do not pull, bend or damage the cord. • Do not use plug adapter. • This appliance is designed for use by adults. Do not allow children to play with the appliance or hang off the door. • Never touch the power cord/plug with wet hands. This may cause a short circuit or electric shock. • Do not place explosive or flammable material in your fridge. Place drinks with high alcohol content vertically in the fridge compartment and make sure their tops are tightly closed. When the door of the fridge is closed, a vacuum seal will form. Wait for 1 minute before reopening it.

EN - 26 This application is optional for easy opening of the door. With this application, a little condensation may occur around this area and you may remove it. Old and Out-of-order Fridges • If your old fridge or freezer has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident. • Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore, take care not to harm environment when you are discarding your old fridges. CE Declaration of conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Packaging and the Environment Packaging materials protect your machine from damage that may occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production. Notes: • Please read the instruction manual carefully before installing and using your appliance. We are not responsible for the damage occurred due to misuse. • Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future. • This appliance is produced to be used in homes and it can only be used in domestic environments and for the specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be cancelled and our company will not be responsible for any losses incurred. • This appliance is produced to be used in houses and it is only suitable for cooling / storing foods. It is not suitable for commercial or common use and/or for storing substances except for food. Our company is not responsible for any losses incurred by inappropriate usage of the appliance.

EN - 27 2  DESCRIPTION OF THE APPLIANCE 2 3 6 7 8 4 9 11 12 13 5 1 10 This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. 1) Control panel 2) Turbo fan * 3) Wine rack (Bottle shelf) * 4) Refrigerator shelves 5) Adjustable glass shelf * 6) Chiller shelf * 7) Crisper cover 8) Crisper 9) Levelling feet 10) Bottle shelf 11) Adjustable Door Shelf * / Door Shelf 12) Door shelves 13) Egg holder * In some models General notes: Fresh Food Compartment (Fridge): Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance, and shelves evenly distributed, position of door bins does not affect energy consumption. 3 USING THE APPLIANCE 3.1 Information on No-Frost technology No-frost refrigerators differ from other static refrigerators in their operating principle. In normal refrigerators the humidity entering the refrigerators due to opening the door and the humidity inherent in the food causes freezing in the backside of air duct. To defrost the frost and ice in the backside of air duct, you are periodically required to turn off the refrigerator, place the food that needs to be kept cooled in a separately cooled. The situation is completely different in no-frost refrigerators. Dry and cold air is blown into the refrigerator compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost refrigerators allows you ease of use, in addition to its huge capacity and stylish appearance. 3.2 Display and Control Panel

EN - 28 1 2 3 4 Using the Control Panel 1. Fridge temperature set button 2.  Super cooling symbol (Super cooling LED) 3. Alarm symbol (Alarm LED) 4. Fridge adjusted temperature indicator 3.3 Operating your Fridge Lighting (If available) When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests. 3.3.1 Fridge Temperature Set Button This button allows setting temperature of the fridge. In order to set values for fridge partition, press this button. Use this button also to activate super cooling mode. 3.3.2 Alarm symbol (Alarm LED) In case of a problem within the fridge, the alarm led will release red light. 3.3.3 Super Cooling Mode When would it be used? • To cooling huge quantities of food. • To cooling fast food. • To cooling food quickly. • To store seasonal food for a long time. How to use? • Press temperature set button until super cooling light comes on. • Super cooling led will light during this mode. • For optimal appliance performance in maximum cooling capacity, set the appliance to active super cooling mode 6 hours before you put the fresh food into the fridge. During this mode: If you press temperature set button, the mode will be cancelled and the setting will be restored from 2. The super cooling mode will be cancel automatically after 6 hours or when cooling sensor temperature falls below 2 °C. 3.3.4 Fridge Temperature Settings • The initial temperature of the setting display is 5 °C. • Press fridge setting button once. • Every time you press the button, the setting temperature will increase. (2 °C, 4 °C, 5 °C, 6 °C, 8 °C, Super cooling) • If you press fridge setting button until super cooling symbol is displayed on your fridge. • Settings display and you do not press any button within the following 3 seconds. • Super cooling will blink. • If you keep on pressing, it will restart from last value. 3.4 Temperature Settings Warnings • Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in the environments which are outside of the stated temperature ranges. This will reduce the cooling efficiency of the appliance. • Temperature adjustments should be made according to the frequency of door openings, the quantity of food kept inside the appliance and the ambient temperature in the location of your

EN - 29 appliance. • When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During this time, do not open the door and do not keep a large quantity of food inside. • A 5 minute delay function is applied to prevent damage to the compressor of your appliance when connecting or disconnecting to mains, or when an energy breakdown occurs. Your appliance will begin to operate normally after 5 minutes. Larders (coolers) have not any freezer compartment but can cool up to 4 - 6 °C. 3.4.1 Stand-By Mode How To Activate ? Set “2” set value and push set button until all leds are blink three times. How It Works? In stand-by mode; all components will be disabled. If user push set button while in stand-by mode, all leds will blink three times to show stand-by mode is active. How To Deactivate ? Push and hold set button until display returns to normal working.After the mode is deactivated, the “Alarm LED” may light on the display because the product may be hot. The “Alarm LED” will turn off when the product reaches normal temperature. Climate class and meaning: T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C. ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C. N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C. SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C. The Turbo Fan (if available) Do not block the air inlet and outlet openings when storing food, otherwise air circulation provided by the turbo fan will be impaired. 3.5 Accessories Visual and text descriptions in the accessories section may vary according to the model of your appliance. 3.5.1 The Bottle Holder (In some models) Use the bottle holder to prevent bottles from slipping or falling over. 3.5.2 The Storage Box You can adjust and use this department for 2 different functions. Sliding cover (The images are representative) Your fridge is delivered to you with the cover shown in the open position. Declared energy consumption and volume are defined according to the Chiller option of the product. To use for 0 °C department: If you want to use this compartment as a 0 °C box, you must take the sliding cover (indicated in the picture) from the closed position to the open position. To use for Crisper department:

EN - 30 If you want to use this compartment as a Crisper, you must take the sliding cover (indicated in the picture) from the open position to the closed position. While this department is used as a 0 °C department, keeping food in the Chiller, compartment instead of the freezer or refrigerator compartments, allows food to retain freshness and flavour for longer, while preserving its fresh appearance. When the Chiller tray becomes dirty, remove it and wash with water. Water freezes at 0°C, but food containing salt or sugar freezes at temperatures lower than this. The Chiller compartment can be used for storing foods such as raw fish, lightly pickled food, rice, and so on. Pull the chiller shelf out towards you. The cover will open automatically. Do not put food you want to freeze or ice trays (to make ice) in this compartment. 3.5.3 The Fresh Dial (In some models) (The images are representative) or (The images are representative) If the crisper is full, the fresh dial located in front of the crisper should be opened. This allows the air in the crisper and the humidity rate to be controlled, to increase the life of food within. The dial, located behind the shelf, must be opened if any condensation is seen on the glass shelf. 3.5.4  Adjustable Door Shelf (In some models) Six different height adjustments can be made to provide storage areas that you need by adjustable door shelf. To change the position of adjustable door shelf ; Hold the bottom of the shelf and pull the buttons on the side of the door shelf direction of arrow. (Fig.1) Position door shelf the height you need by moving up and down. After you get the position that you want the door shelf, release the buttons on the side of the door shelf (Fig.2) Before releasing the door shelf, move up down and make sure the door shelf is fixed. Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf could fall off the rails due to the weight. So damage may occur on the door shelf or rails. 3.5.5  Adjustable Glass Shelf (In some models) Adjustable glass shelf mechanism provides higher storage spaces with a simple movement. To cover the glass shelf, push it. Fig. 1 Fig. 2

EN - 31 Fig. 1 Fig. 2 You can load your food as you want in the resulting extra space. To bring the shelf in its original position, pull it toward you. Visual and text descriptions in the accessories section may vary according to the model of your appliance. 4 FOOD STORAGE 4.1 Refrigerator Compartment For normal operating conditions, set the temperature of the cooler compartment to +4 or +6 o C. • To reduce humidity and avoid the consequent formation of frost, always store liquids in sealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of the evaporating liquid and, in time, your appliance will require more frequent defrosting. • Cooked dishes must remain covered when they are kept in the fridge.Do not place warm foods in fridge.Place them when they are cool, otherwise the temperature/humidity inside the fridge will increases, reducing the fridge’s efficiency. • Make sure no items are in direct contact with the rear wall of the appliance as frost will develop and packaging will stick to it. Do not open the refrigerator door frequently. • We recommend that meat and clean fish are loosely wrapped and stored on the glass shelf just above the vegetable bin where the air is cooler, as this provides the best storage conditions. • Store loose fruit and vegetable items in the crisper containers. • Storing fruit and vegetables separately helps prevent ethylene-sensitive vegetables (green leaves, broccoli, carrot, etc.) being affected by ethylene- releaser fruits (banana, peach, apricot, fig etc.). • Do not put wet vegetables into the refrigerator. • Storage time for all food products depends on the initial quality of the food and an uninterrupted refrigeration cycle before refrigerator storage. • Water leaking from meat may contaminate other products in the refrigerator. You should package meat products and clean any leakages on the shelves. • Do not put food in front of the air flow passage. • Consume packaged foods before the recommended expiry date. Do not allow food to come into contact with the temperature sensor, which is located in the refrigerator compartment, in order to keep the refrigerator compartment at optimum temperature. • For normal working conditions, it will be sufficient to adjust the temperature setting of your refrigerator to +4 °C. • The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods below 0 °C are iced and rotted, bacterial load increases above 8 °C, and spoils. • Do not put hot food in the refrigerator immediately, wait for the temperature to pass outside. Hot foods increase the degree of your refrigerator and cause food poisoning and unnecessary spoiling of the food. • Meat, fish, etc. should be store in the chiller compartment of the food, and the vegetable compartment is preferred for vegetables. (if available) • To prevent cross contamination, meat products and fruit vegetables are not

EN - 32 stored together. • Foods should be placed in the refrigerator in closed containers or covered to prevent moisture and odors. The table below is a quick guide to show you the most efficient way to store the major food groups in your refrigerator compartment. Food Maximum storage time How and where to store Vegetables and fruits 1 week Vegetable bin Meat and fish 2 - 3 days Wrap in plastic foil, bags, or in a meat container and store on the glass shelf Fresh cheese 3 - 4 days On the designated door shelf Butter and margarine 1 week On the designated door shelf Bottled products e.g. milk and yoghurt Until the expiry date recommended by the producer On the designated door shelf Eggs 1 month On the designated egg shelf Cooked food 2 days All shelves NOTE: Potatoes, onions and garlic should not be stored in the refrigerator. 5 CLEANING AND MAINTENANCE Disconnect the unit from the power supply before cleaning. Do not wash your appliance by pouring water on it. Do not use abrasive products, detergents or soaps for cleaning the appliance. After washing, rinse with clean water and dry carefully. When you have finished cleaning, reconnect the plug to the mains supply with dry hands. • Make sure that no water enters the lamp housing and other electrical components. • The appliance should be cleaned regularly using a solution of bicarbonate of soda and lukewarm water. • Clean the accessories separately by hand with soap and water. Do not wash accessories in a dish washer. • Clean the condenser with a brush at least twice a year. This will help you to save on energy costs and increase productivity. The power supply must be disconnected during cleaning. 5.1 Defrosting water tray • Your appliance performs automatic defrosting. The water formed as a result of defrosting passes through the water collection spout, flows into the water tray behind your appliance and evaporates there. • Make sure you have disconnected the plug of your appliance before cleaning the water tray. • Remove the water tray from its position by removing the screws (if it has screws). Clean it with soapy water at specific time intervals. This will prevent odours from forming. Replacing LED Lighting To replace any of the LEDs, please contact the nearest Authorised Service Centre. Note: The numbers and location of the LED strips may change according to the model.

EN - 33 If product equipped with LED lamp This product contains a light source of energy efficiency class <E>. If product equipped with LED Strip(s) or LED card(s) This product contains a light source of energy efficiency class <F>. 6 SHIPMENT AND REPOSITIONING 6.1  Transportation and Changing Positioning • The original packaging and foam may be kept for re-transportation (optional). • Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation on the packaging. • Remove all movable parts or fix them into the appliance against shocks using bands when re-positioning or transporting. Always carry your appliance in the upright position. 7  BEFORE CALLING AFTER-SALES SERVICE Errors Your appliance will warn you if the temperature(s) is/are at improper levels or if a problem occurs with the appliance. In case of a problem within the appliance, the alarm led will release red light. Alarm indicator LED is turning on MEANING WHY WHAT TO DO "Failure" Warning There is/are some part(s) out of order or there is a failure in the cooling process. The product is plugged for the first time or a long-time power interruption for 1 hour. Check the door is open or not and check if the product working 1 hour. If the door is not open and the product had worked 1 hour, call service for assistance as soon as possible. If you are experiencing a problem with your appliance, please check the following before contacting the after-sales service. Your appliance is not operating Check if: • There is power 6.2 Repositioning the Door • It is not possible to change the opening direction of your appliance door if door handles are installed on the front surface of the appliance door. • It is possible to change the opening direction of the door on models with handle on the side of the door or without handles. • If the door-opening direction of your appliance can be changed, contact the nearest Authorised Service Centre to change the opening direction.

EN - 34 • The plug is correctly placed in the socket • The plug fuse or the mains fuse has blown • The socket is defective. To check this, plug another working appliance into the same socket. The appliance performs poorly Check if: • The appliance is overloaded • The appliance door is closed properly • There is any dust on the condenser • There is enough space near the rear and side walls. Your appliance is operating noisily Normal noises Cracking noise occurs: • During automatic defrosting • When the appliance is cooled or warmed (due to expansion of appliance material). Short cracking noise occurs: When the thermostat switches the compressor on/off. Motor noise: Indicates the compressor is operating normally. The compressor may cause more noise for a short time when it is first activated. Bubbling noise and splash occurs: Due to the flow of the refrigerant in the tubes of the system. Water flowing noise occurs: Due to water flowing to the evaporation container. This noise is normal during defrosting. Air blowing noise occurs: In some models during normal operation of the system due to the circulation of air. The edges of the appliance in contact with the door joint are warm Especially during summer (warm seasons), the surfaces in contact with the door joint may become warmer during the operation of the compressor, this is normal. There is a build-up of humidity inside the appliance Check if: • All food is packed properly. Containers must be dry before being placed in the appliance. • The appliance door is opened frequently. Humidity of the room enters the appliance when the doors are opened. Humidity increases faster when the doors are opened more frequently, especially if the humidity of the room is high. The door does not open or close properly Check if: • There is food or packaging preventing the door from closing • The door joints are broken or torn • Your appliance is on a level surface. Recommendations • If the appliance is switched off or unplugged, wait at least 5 minutes before plugging the appliance in or restarting it in order to prevent damage to the compressor. • If you will not use your appliance for a long time (e.g. in summer holidays) unplug it. Clean your appliance according to chapter cleaning and leave the door open to prevent humidity and smell. • If a problem persists after you have followed all the above instructions, please consult the nearest authorised service centre. • The appliance you have purchased is designed for domestic use only. It is not suitable for commercial or common use. If the consumer uses the appliance in a way that does not comply with this, we emphasise that the manufacturer and the dealer will not be responsible for any repair and failure within the guarantee period.

EN - 35 8 TIPS FOR SAVING ENERGY 1.  Install the appliance in a cool, well- ventilated room, but not in direct sunlight and not near a heat source (such as a radiator or oven) otherwise an insulating plate should be used. 2.  Allow warm food and drinks to cool before placing them inside the appliance. 3.  Place thawing food in the refrigerator compartment if available. The low temperature of the frozen food will help cool the refrigerator compartment while the food is thawing. This will save energy. Frozen food left to thaw outside of the appliance will result in a waste of energy. 4.  Drinks or other liquids should be covered when inside the appliance. If left uncovered, the humidity inside the appliance will increase, therefore the appliance uses more energy. Keeping drinks and other liquids covered helps preserve their smell and taste. 5.  Avoid keeping the doors open for long periods and opening the doors too frequently as warm air will enter the appliance and cause the compressor to switch on unnecessarily often. 6.  Keep the covers of the different temperature compartments (such as the crisper and chiller if available) closed. 7.  The door gasket must be clean and pliable. In case of wear, replace the gasket. 9 TECHNICAL DATA The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is also possible to find the same information in EPREL using the link https:// eprel.ec.europa.eu and the model name and product number that you find on the rating plate , the appliance. See the link www.theenergylabel.eu for detailed information about the energy label. 10  INFORMATION FOR TEST INSTITUTES Appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 2. Please contact the manufacturer for any other further information, including loading plans. 11 CUSTOMER CARE AND SERVICE Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number and Service Index. The information can be found on the rating plate. You can find the rating label inside the fridge zone on the left lower side. The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model. Visit our website to: www.cylinda.se

Elektroskandia Sverige AB, Cylinda, 191 83 Sollentua Service Vi har service i hela Sverige/ Nationwide service in Sweden Besök www.cylinda.se / Visit www.cylinda.se Ring 0771-25 25 00 (endast lokaltaxa) / Call 0771-25 25 00 Uppge / Declare Maskintyp / Model code Serienummer / Serial number Inköpsdatum / Purchase date Problembeskrivning / Problem description Namn och adress / Name and address Ditt telefonnummer / Phone number Kontakta oss / Contact us www.cylinda.se Bruksanvisning User manual 52383859