Canon Speedlite ST-E2 manual

View a manual of the Canon Speedlite ST-E2 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Canon
  • Product: Other camera accessory
  • Model/name: Speedlite ST-E2
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
. Thank you for purchasing a Canon product.
Speedlite Transmitter ST-E2 is a wireless transmit-
ter which can control up to two Speedlite 550EX
groups set as slaves.
The transmitting range is about 12 to 15 meters /
39.4 to 49.2 ft indoors and 8 to 10 meters / 26.2 to
32.8 ft outdoors. With Type A cameras (EOS-3, EOS
Elan IIIIIE, EOS 50/50E, EOS 500NlRebel G, EOS
IX. EOS IX7AX Lite), the ST-E2 can execute the fol-
lowing operations through wireless control:
E-?"rL autoflash
High-speed sync (FP flash)
FE lock
Flash exposure compensation
Manual flash (Flash output set with Speedlite)
Multi-flash firing (Set with the Speedlites)
This Instructions booklet assume that a Type A cam-
'
era is used with the ST-E2.
With Type H cameras (EOS cameras except 'I'ype
A models), the ST-E2 can be used only for manual
flash and multi-flash photography. See pages 23
to 27 in this booklet and the Speedlite 550EX
Instructions.
Symbols used in this Instructions booklet:
0: Warning for preventing camera or ST-E2
malfunction.
a: Supplementary notes for using the ST-E2
with the camera.
:'&: Helpful tip for using the ST-E2 and taking
-,
AF-askt dea'm to a r e a k .
- I I
With the EOS-3, the following operations are also
possible: Flash ratio control between two Speedlite
slave P ~ O U D S .modeline flash firing. and linkage of
C€
The CE Mark is a Directive cunformity mark of the European
Community (ECl
pictures.
Keep this Instructions booklet handy for future
reference. 1 .
This digital apparatus does not exceed the Class B
limits for radio noise emissions frnrn digital appara-
tus as set out in the interference-causing equipment
standard entitled "Digital Apparatus", ICES-003 of
the Industry Canada.
C
O
P
Y
Page: 2
Contents
1. Nomenclature ................................................................................................................ 22
2. Readying the ST-E2.......................................................................................................
23
3. Readying the 550EX (Slave Setting)............................................................................ 25
4. Basic Wireless E-TTL Autoflash Operation ................................................................. 26
5. Wireless Multi-Flash E-TTL Autoflash Operation ...................................................... 29
6. Applications ................................................................................................................... 33
7. Troubleshooting .............................................................................................................
34
Specifications........................................................................................................................35
Note
All the operation instructions in this booklet assume that the ST-E2 and other relevant equipment are
already turned on. Before proceeding, make sure the ST-E2 and other equipment are on.
I I
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not
cause harmful interference, and (2) this device must accept any interference receivcd, including interlilrence that may cause
undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changt.s or
modifications should be made, you could be required to stop operation of the equipment.
This equipment has been tested and found to conlply with the limits for a class B digital device, pursuant to part 15 16
the FCC
Rules. These limits arc designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantec that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour;~g-ed
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radiolIli technician for help. 21
C
O
P
Y
Page: 3
1. Nomenclature
Front Rear
Battery compartment cover
Flash ratio cuntrol lamp
,+I"-assist beam emlttor Channel intl~cat,~r
< PILOT > I'ilot. I:im
Shoc l t ~ k
slider trnnsmission button
High-speed synr (FI' fl:~: < 0 ,:Turns off thr 11rnr.er.
< I >:Turns on thr po\rer.
< HOLD >: Retains the cur-
rent settings u,hilo thr switch
position is I . All lr:,nsmiLter
controls except the tPet trans-
mission button ;ire ~lis:$blcd.
C
O
P
Y
Page: 4
2. Readying the ST-E2
(I) Installing the Battery
Use one lithium 2CR5 battery
(sold separately).
1Slide the battery compartment
cover as shown by the arrow
and remove.
Install the battery in the orien-
tation shown in the compart-
ment.
Install the battery compart-
ment cover to close the battery
compartment.
About the battery
If the battery contacts a r e
soiled, improper electrical con-
tact may result. Before
installing the battery, wipe the
battery contacts with a clean
cloth.
When to replace the battery
Replace the battery if it takes 30
sec. or longer for the red pilot
lamp to light after you set the
main switch to <I > or <HOLD >.
(2) Attachment to the
Camera
Push in the ST-E2's mounting
1foot all the way into the camer-
a's hot shoe.
Slide the shoe lock slider as
shown by the arrow. (The lock
pin protrudes to lock the ST-
E2 onto the camera.)
To remove the ST-152,slide the
shoe lock slider in the opposite
direction (the lock pin retracts)
and slide off the ST-EP.
C
O
P
Y
Page: 5
Readvine the ST-E2
The hot shoe on the EOS 650,
EOS 620, EOS 750, and EOS
850 will not couple with the
lock pin. The ST-E2 can still be
attached to these cameras, but
it cannot be locked onto the hot
shoe.
(3) Turning On the Power
1Turn the main switch to <I >.
The main switch has the follow-
ing three positions:
< 0> : Turns of'f'the powcr.
<I > : Turns on the powrr.
< HOLD > : The settings which
were set at the I switch position
arc frozen. All transmitter con-
trols exccpt the test trtinsmis-
sion button are disabled. This
prevents inadvertant alteration
of transmitter settings.
When transmission is possible,
2 the pilot lamp lights in red and
the 5 icon lights in the camera
viewfinder.
0When the 5 icon lights in the
camera viewfinder, it indicates
that the ST-E2 is able to trans-
mit. When Speedlite 550EX is
rechareed and readv to fire. its
AE-assist beam emiiter blinks.
Q If the ST-E2 is on and not
used for 90 sec., the SE
(Save Energy) feature takes
effect and turns off the
power automatically to save
battery power. The ST-E2
turns back on when the
shutter button or test trans-
mission button is pressed.
With a Type A camera (EOS-
3, EOS Elan IIIIIE, EOS
50/50E, EOS 500NIRebel G,
EOS IX. EOS IX7IIX Lite)
equipped with E-ITL, the ST-
E2's E-ITL indicator lights.
C
O
P
Y
Page: 6
3. Readying the 550EX (SlaveSetting)
(4) Channel Setting (1) Slave settingIPoweron (2) Channel setting
RATIO
:
*
E
To prevent wireless signals from
being transmitted to unrelated
Speedlite 55OEX units in the
vicinity, you can set a channel dif-
ferent from the one used by the
unrelated Speedlite 550EX units.
One of four channels can be set.
The ST-E2 (master)and slave
Speedlite(s) must be set to the
same channel No.
Press the < CH. > button and
select the desired channel.
Each time the button is pressed the
channel indicator changes in the fol-
lowing loop: 1 + 2 -
.3 -
.4 -1
The ST-E2 and Speedlite 550EX
Set the wireless selector to
1< SLAVE >. HereinaRer, a
Speedlite 550EX set to this
mode will be called a "slave."
The zoom setting is set automat-
ically to (a c7'lmm. This can be
overridden manually.
2 Set the slave's main switch to
< I> or < SE > to turn it on.
When the Speedlite is ready to
fire, the AF-assist beam emitter
blinks conli~>uously
a t 1 Hz.
Each time you press the
< SEL/SET > button, the blink-
ing display changes in the fol-
lowing loop:
+m+----- ,
-- lights -
2 While is blinking, press
the <+ z or < - > butlon to
select the same channel No. as
the ST-E2's.
0 If the 550EX's channel No. is
different from t h e ST-E2's
channel No., wireless trans-
mission will not work.
must be set to the same channel No
C
O
P
Y
Page: 7
4. Basic Wireless E-TTL Autoflash Operation .
press the < SEL/SET, button After the ST-E2 and slave are ready, they can work within the area
3 to regster the channel N ~ ,
(the shown below for easy wireless E-TTI.
autoflash.
display stops blinking and For explanatory purposes, the EOS-3 will be used as the sample camera here.
stays on).
(I)Positioning of ST-E2 and slave
Attach the slave to the mini stand (equipped with tripod socket) which comes
with the 550EX.
Turn the Speedlite's body (bounce feature) so that the slave sensor fhccs toward
thc ST-EZ.
Indoors, the slave position need not be so precise since the light will also bounce
off the walls.
After positioning the camera and slaves, be sure to test the wirclrss control
before taking a picture.
Do not place any obstructions between the ST-EP and slaves. Otherwise, remote
transmission may not bc achieved.
8m I26 21t 12m I39 4R
C
O
P
Y
Page: 8
Basic Wireless E-TTL Autoflash Operation
(2) Camera operation (3)Checking the ST-E2's (4)Wireless operation test
Set the camera for normal flash pilot lamp and slave-
operation. ready status
0 With the EOS-3, make sure the
ST-E2's flash ratio control
lamp is off. (If necessary, press
the <RATIO > button to turn it
off.) If the flash ratio control
lamp is on, the Speedlite may
not fire or a correct exposure
may not be attained. After
turning off the flash ratio con-
trol lamp, set the main switch
to <IioLD> prevent the 'lash Check that the ST-E2's pilot lamp Press the ST-E2's pilot lamp
ratio control lamp from light-
ing inadvertantly.
is on and that the slave is ready. (which also functions a s a test
When the slave is ready to fire, its transmission button).
AF-assist beam emitter flashes at 1 If everything is OK, slavc A will fire
followed by slave R (at 1/64 output).
If the slave(s)docs not fire, reposi-
1 1 1 1 1 1 1 tion the slave's angle or distance
toward the ST-EZ and Lcst it :rg;lin.
0When the ST-E2's pilot lamp
lights and the 5 icon lights in
the camera viewfinder, they
indicate t h a t t h e ST-E2 is
ready for remote transmission.
They do not indicate that the
slave is ready (recharged).
C
O
P
Y
Page: 9
Basic Wireless E-TTI. Autoflash O~eration
(5) Taking the picture and
flash confirmation
W h e n you p r e s s t h e s h u t t e r b u t -
ton c o n ~ p l e t e l y ,
a wirrlcss signal
is t r a n s m i t t e d to t h e slave, t h e n
t h e slave fires a preflash a n d t h e n
t h e m a i n flash when t h e picture is
taken.
The subject's flash cxposurc reading
is obtained with the preflash and
used to set the main flash output.
Wireless flash photography is there-
by executed with an optimum flash
ou1put.
When the correct flash exposure is
obtained, the ST-E2's flash confir-
mation lamp lights for about 3 sec.
immediately after the flash fires. If
it does not light, the picture might
be underexposed. In this case, use a
larger aperture or place the slave
28
closer to the subject and repeat
steps (2)to (5).
With the EOS-3, the model-
Ing flash can be fired to see
B , '
the lighting effects before
t h e piclure i s taken. See
page 32.
The slave must be properly
positioned to receive t h e
wireless transmission.
After the picture is taken.
the slave's operation result
is displayed on the slave's
display panel.
If the slave is in t h e S E
(Save Energy) mode, press-
ing the ST-E2's test trans-
mission button will cancel it.
When you press the shutter
button halfway and activate
t h e camera's exposure
meter, the ST-E2 cannot be
used to cancel the slave's SF:
mode or to execute a test
transmission. The camera's
exposure meter must turn
off (viewfinder's exposure
setting display t u r n s off)
before the SE mode can be
canceled or a test transmis-
sion executed.
AF-assist beam
Under low-light or low-contrast
c o n d i t i o n s , t h e ST-E2's AF-
assist beam is emitted t o assist
a u t o f o c u s i n g . The A F - a s s i s t
b e a m i s c o m p a t i b l e w i t h t h e
EOS-3's Area AF. T h e AF-assist
beam's effective r a n g e is about
0.6 m e t e r t o 10 m e t e r s at t h e
c e n t e r a n d 0.6 m e t e r t o 5
meters along t h e periphery.
The ST-E2's AF-assist bran>can he
emitted only while the ST-E:! is
attached to the EOS-3. In the case of
EOS cameras with a built-in AF-
assist beam emitter, the beam will
be emitted by the camera.
The slave's AF-assist beam is not
emitted (except when the flash is
ready).
44 To prevent overheating, limit
the number of consecutive
wireless transmissions to 50.
After 50 consecutive wireless
transmissions, allow the ST-EP
to rest for 10 minutes.
C
O
P
Y
Page: 10
45. Wireless Multi-FlashE-TTL Autoflash Operation
There are t w o types of wireless
multi-flash E-TTL autoflash opcr-
ations:
a< RATIO > OFF: All slaves fire
the same flash output.
Q)< RATIO > ON: Slaves are given
a n ID, either A or B. The flash
ratio is then set for each ID.
The flash ratio can be set only when
the camera is an EOS-3.
The flash ratio cannot be set with an
EOS Elan IVIIE, EOS 50/5OE, EOS Rebel
G/500N, EOS IX or EOS K71X Lite.
a By changing the distance
between t h e subject and
slaves, the lighting balance
(flash ratio) can be changed
accordingly.
Two or more slaves can be
used.
With the EOS-3, a modeling
flash can be fired to check
the lighting effects before
the picture is taken.
As a n example, two slaves a r e
used here, one positioned on the
left and the other on the right of
the subject.
All t h e slaves s e t a t t h e s a m e
channel fire a t the same output
controlled by E-TTL autoflash to
obtain a correct exposure.
Thc operation ~rooedure
is thc same
as with wireless I.>-'ITI, autoflash.
0 With the EOS-3, make sure the
ST-E2's flash ratio control
lamp is off. (If necessary, press
the <RATIO > button to turn it
off.) If the flash ratio control
lamp is on, the Speedlite may
not fire or a correct exposure
may not be attained. After
turning off the flash ratio con-
trol lamp, set the main switch
to <HOLD > to prevent the flash
ratio control lamp from light-
ing inadvertantly.
Sample Multi-Flash
Setup with Uniform
Flash Output +%-
In the sample flash setup shown
below, the lighting on the left will
be brighter than on t h e right of
the subject.
Outdoors
C
O
P
Y
Page: 11
Wireless Multi-Flash E-TTL Autuflash Operation
In the example shown for "Multi- Sample Multi-Flash Setup with Slave ID and Flash
F l a s h with a Uniform Flash ti^ settings
O u t p u t , " the lighting balance 15ni/ 49.2ft
(flash ratio) was adjusted by plac-
i n g t h e slaves a t different dis-
tances to the subject. However,
with "Multi-Flash with Slave ID
and Flash Ratio Settings," the
flash ratio can be adjusted with-
out moving the slaves.
The flash ratio can bc adjusted Indoors 12m~ : % . . i s t
from 8:l to 1 and from 1 to 118 in
half-stop increments.
C
O
P
Y
Page: 12
Wireless Multi-Flash E-'lTL Autoflash Operation
(1)Setting the Slave ID
With the wireless control of multi-
ple slaves, you can set the flash
ratio and specify the main flash
and fill flash by assigning a slave
ID. There are three IDS:A, B, and
C. The ST-E2can control slaves A
and B. When the flash ratio con-
trol lamp is lit, the C slave does
not fire.
Set the slave ID to A for the slave on
the left of the camera. and to B for
the slave on the right of the camera. Press the slave's < SEL/SET >
button to select < >.
2 Press the <+> or < - > but-
ton to set the slave ID to <A>.
3 Press the < SELISET > button
to register the slave ID. (The
slave ID stops blinking and
stays on.)
4 Follow the same procedure for
the other slave to set the slave
ID to <B>.
0If the slave's ID is set to C, it
cannot he controlled by thc ST-
E2. Be sure to set the slave ID 7rn5s
to A or B.
There is no limit a s to t h e
number of slaves that can be
used. Set the slave ID for all
the slaves to either A or B.
About Slave Group
Control
All slaves set to the same ID are
controlled as one group.
Shown below is a group of three
slaves whose ID is A. They will be
controlled as a single slave group A.
C
O
P
Y
Page: 13
Wireless Multi-Flash E-TTL Autoflash Operation
(2)Setting the A:B Flash Ratio (3)Camera and Slave
Positions
The flash ratio between slave A and slave B can be set to specify the
main flash and fill flash. The flash ratio can be set from 8:l to 1and Position the ST-E2-attached cam-
from 1 to 1:8 in half-stop increments. In terms of exposure stops, it era and the two slaves to obtain
ranges from 3:l to 1 and from 1 to 1:3. When the flash ratio is set, E- the desired lighting effect. See
TTL autoflash metering controls the flash output to obtain a correct page 26.
exposure.
Check that the ST-E2's main Press the < 4 > or < b > but-
switch is set to c I > , then ton to select the desired flash
press the <RATIO > button. ratio.
Thc flash ratio control lamp
lights in red, and the respective
0If the main switch has been set
flash ratio indicator lights. to < I >, the buttons will not
work. Set the main switch to
The flash ratios for the unmarked indica- <HOLD >.
tors ( are shown in parentheses below.
The modeling flash can be fired to
see the lighting effects before the
picture is taken.
(4) Follow the basic proce-
dure for wireless
E-TTL autoflash
exposure to take the
picture. See page 26.
C
O
P
Y
Page: 14
6.Applications
Even with a wireless multi-flash system, you can use high-speed sync
(FPflash), FE lock, and flash exposure compensation in the same way
as with a camera-attached 650EX.
Wireless high-speed sync (FP
flash)
-
Wireless FE lock
After setting the wireless single- After setting the wireless single-
or multi-flash setup, just set the or multi-flash setup, just press
ST-E2's high-speed sync button to the camera's < FEL > button to
< 5~ >. This enables wireless high- enable wireless FE lock.
speed sync. The slaves need not
be touched at all.
\ I /
39:The ST-E2 can transmit wireless signals only toward the front. Therefore,
the slaves cannot be positioned behind the camera. Otherwise, they will
not be able to pick up the ST-E2's wireless control signals. However, with
Off-Camera Shoe Cord 2 (sold separately), the ST-E2 can be positioned
away from the camera and face any direction for wireless transmission.
Flash exposure compensation
Flash exposure compensation
can be set with the camera.
Wlrelchs manual flash
Wireless manual flash can be fired
by settlng the slave to single-slave
-
or manual flash
Wlreless repeating flash
Wireless repeating flash can be
used when the slave has been set to
slngle-slave or repeat~ng
flash
For detalls, see the 5.50EXts
Instruct~ons
C
O
P
Y
Page: 15
7.Troubleshooting
Page
24
27
2 9
28
25
33
26
:3 1
28
28
28
-
24
Problem
Soon after thc power is turned
on, the indicator lamp turns on'
Although the 5 icon is lit in
the viewfinder, the slave does
not fire.
T h e flash picture cnmc out
undrrexposed
The slave d ~ ~ c s
nclt fire evcn
when the sl~utt<.~.
i, ~rrlra.;ed.
The ST-EP does not enlit th<.
XF-assist beam.
The slave's flash-rcady indica.
tor (blinking AF-assist beam I
turns off.
The test transmission does not
work.
The flash ratlo cannot be set.
Probable Cause
If the power is turned on and the ST-E2 is not
used for 9 0 scc., the power turns off automatically.
The 5 ]con in the v~ewfinder
does not indicate
flash ready. Rather. it indicates that the ST-E2 is
able to transm~t.
The flash ratio control lamp was lit even thouph a
multi-flash system with flash ratio settings was
not used.
'The subject is beyond the effective flash range.
'I'hc sl~ivr's
channel does not lnatcli the ST-E2's
oh;~nnrl.
T l ~ r
sl;~ve
is tor^ far away from thc ST-E2.
'Thu sl;~vc
is r ~ r ,t l ~ r
side or hack of thr c:lmr,r;l.
'l'hc Speedlite's slave sr,nsar IS not pmperly point-
c.d 3t L ~ C
ST-E2.
'l'hc Ilr~shratio h:lu Ihcrr~srt, hut thc slave ID has
hrrn set to C.
1'Iic, r;~rner;l
is not ; I I ~KOS-3.
The, sla\.e is in the SE mode.
You prcssrd the shutter button halfway and this
activ;~ted
the exposure meter
Thr camera is not an EOS-3.
The ST-E2's main switch is set to <HOLD>.
Solution
Either press the shutter button halfway or press
the < PILOT > button.
When the slave is ready to fire, ~ t s
A12-assist beam
emltter blinks
Turn off the flash ratio control lamp bcforc takinp
the picturr~.
Place the slave nearer to the suhect or use 3 larg-
cr aperture (smaller f-number).
Set thr slavc to thesamechannel as thr ST-E2.
Position the slavc nearer to the ST-E2 :ind tcst
the transmission befirrc taking the picture.
Use On'-(:amera Shoe Cord 2 (solrl separatrlyl and
point the ST-E2's trtlnsmitter toward the slave.
Use thc RSOEX's bounce feature trl point its sI;~vc
sensor townrd the ST-EZ.
Set thc slave 11) to A or B.
If thc EOS camcra has a built-in AF-assist beam.
the camera will rmit the beam instead ofthe ST-
E2.
Press the ST-E2's < PILOT > button to cancel the
slave's SE mode.
Make sure the metering display in the viewfinder
is off Then test the transmission.
The flash ratio cannot he set with cameras other
than the EOS-3.
Set the main switch to < I 1.
C
O
P
Y
Page: 16
I
Specifications
Type
Compatible Camcrns
Channels
Flash Ratio Control
High-Specd Sync tFP flash)
Slave Operation Cunfirmation
lilasli Exposure Cunfirn~ation
WirrlrsslaveSF.mcdecancellatlon
Wireless Transmission
Transm~ssion
Range
Transmission Coveragr
Battery Life
AF-assist Beam
AF-assist Beam Effective Kanpe
SE Featurc
Powrr Sourcr
D~mensions
Weight
55OEX-dedicated, clip-on Speedlite transmitter with direct 4
Type A EOS cameras (E-TTLat
Typo B EOS canicras IMariual f
.
-
1
For AR ratio I 8 to 1:l lo 8:l.in half-step incremrnts or 18 strps
Enablcd w ~ t h
h~gh-speed
sync modr 5 " .
With trst transmtssion hutton.
"Slave A fires followed by slavr I3 at llfi4 output.
1 Rrforc flash fires durlng VE lock
Adequate flash rxposurc indicatrd by the 5 icon lit in the vie\vfinder.Insufficient flash exposure indicat-
ed by the 5 icon blinking in the viewfinder.
2 After flash fires
ST-EZ's flash confirmatiun lamp ltghts in green for 9 sec.
Cancels when thc test transmission buttun or FE lock button is pressed to turn on t h ~
slave unit
Infrared pulse
Indoors: Approx. 12 - 15 meters139.4 - 49.2 ft Ontdrmrs: Approx. 8 - 10 meters / 26.2 - 32.8 ft
r10' horizontal and +30' vertical
Approx. 1,500 transmissions (At room temperature and with a new set of batteries)
Compatible with EOS-3's 45-point Area AF and 28mm and longer lens focal lengths
Approx. 0.6 tn 10 m 12.010 33 A at center. 0.6 to 5 m12.0 to 16 5 ft along the periphery (in total darkness).
While thc power switch is set to I or HOLD, the transmitter turns off automatically aftcr about 90 scc. of
non-use.
2CR2 lithium (6V) b a t k w x 1
fi2 (W)x 51 (HI x 80 (Dlmni 12. ) x 3.1 (Dltn
100 g13.5 oz (rxcluding battery
W~rrlms
Operat~on
Il~fferences
wrth the 550EX
Flash rxposurr compensation
Manual flash
Repeating flash
-All data are based un (';~non'?;
Stt~nil;~t-cl
'I'v.it
Method.
Subject to change without noticc,.
Wireless Operation I ST-E2 I B a u r , ~
<masterl
-
Flash ratio control 2 groups A, I3 I :3 groups: A, R, C
FER
Each slave is set
manually.
0
Set \villi maslcr.
C
O
P
Y
Page: 18
Canon
CANON INC. 30-2. Shimornaruko 3-chome, Ohta-ku. Tokyo 146-8501, Japan
U S A -
- CANON U.S.A., INC.
For all lnqutriesconcerning lhls camera. call toll free in the U.S. 1800.828.4040
or wrlle lo: Customer Relallons, Canon U S A.. Inc
One Canon Plaza. Lake Success. N.Y. 11042-1198
CANADA -CANON CANADA INC. HEADQUARTERS
5390 Dlxle Roao. Miss~ssauaa.
Ontarlo L5T 1P7.Canada
CANON CANADA INC~MONTREAL
BRANCH
5990. CMe~de
L~esse.
Montreal Ou8bec H4T lV7. Canada
CANON CANADA INC. CALGARY OFFICE
2828. 16th Street N E Calgary. Aberia TZE 7K7. Canada
Far all Nnauirlescancernlna this camera. wll toll free In Canada I 800 828~4040
EUROPE. AFRICA - CANON EUROPA N.V.
8 MIDDLE EAST Bovenkeikerweq 59 61. P 0 Box 2262 1180 EG Amstelveen. The Netherlands
CANON PHOTO VIDEO FRANCE S.A.
102, averwe Charles de Gaulle 92250 La GarenneColombes. France
CANON UK LTD.
Brerll Trnd8ng Cenlre. Nonh Circular Road, London NWlO OJF. Uniled Kingdom
CANON EURO-PHOTO G.m.b.H
S181"~"5rl"4 90 92. D-478i7 Wllich. Germany
CANON ~TALIA
S. A
Palazzo L. Slrada fi. 288dRozzano. Mrlanolrorr.Mlano. Italy
CANON Benelux N.V.1S.A.
Bessenveldslraal 7. I831 Diegen (Macheen).Belgium
CANON Schweiz AG
GeSchallSbere<ch
Wiedewerkaut. Induslrisslrasse 12.CH-8305 Dielllkoo. Sw8lzerland
CANON G.m.b.H.
Obeilaaerstras~e
233. 4th llwr. 1I00 Wleo, Austrba
CENTRAL & -
- CANON LATIN AMERICA, INC. DEPTO DE VENTAS
SOUTH AMERICA 6505 Blue Laawn Drrve.Sulle 325. M~arnl.
FL33126 U S.A
ASIA-
-
CANON LATIN AMERICA, INC. CENTRO DE SERVlClO Y REPARACION
A n I? 201 I s n ow oe ,c c r H ~ L
o r- or " 3 n ~ r n
CANON SINGAPORE PTE LTD.
79 Anson Road no9 01.05 Singapore 079906
OCEANIA - -CANON AUSTRALIA PTY. LTD.
1 Thomas Holl Drve. N ~ n h
Ryde. N.S W. 21 13.Australla
CANON NEW ZEALAND LTD.
Fred Thomas Dnve. P O Box 33-336. Takapuna. Auckland. New Zealand
JAPAN -
- CANON SALES CO., INC.
1215. Mita. 3 Chome. Mlnato ku. Takyo 108-8011. Japan
CT1 - 7724 - 001 (
C
! CANON INC. 1998 PRINTED IN JAPAN
0299Ni1.2
C
O
P
Y

Question & answers

There are no questions about the Canon Speedlite ST-E2 yet.

Ask a question about the Canon Speedlite ST-E2

Have a question about the Canon Speedlite ST-E2 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Canon Speedlite ST-E2. Please make sure that you describe your difficulty with the Canon Speedlite ST-E2 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.