Canon Powershot D20 manual

View a manual of the Canon Powershot D20 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Canon
  • Product: Digital Camera
  • Model/name: Powershot D20
  • Filetype: PDF
  • Available languages: English, Dutch

Table of Contents

Page: 0
Camera User Guide
ENGLISH
• Before use, be sure to read this guide, including the
safety precautions.
• This guide will familiarize you with how to use the camera
correctly.
• Keep the guide handy for future reference.
COPY
Page: 1
2
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera dealer.
• A memory card is not included (p. 2).
For information about the included software, refer to the ImageBrowser EX
User Guide, in PDF format (p. 28).
The following memory cards (sold separately) can be used, regardless of
capacity.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
• Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been verified to
work with the camera.
Package Contents
PDF Manuals
• Adobe Reader is required to view the PDF manuals.
Compatible Memory Cards
Camera
Battery Pack NB-6L
(with terminal cover)
Battery Charger
CB-2LY/CB-2LYE
Interface Cable
IFC-400PCU
Wrist Strap
WS-DC8
Strap Mount
Warranty
Card
DIGITAL CAMERA
Solution Disk
Getting Started
COPY
Page: 2
Preliminary Notes and Legal Information
3
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
• Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
• Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
• The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
• When the camera is used over an extended period, it may become warm.
This does not indicate damage.
About Eye-Fi Cards
• Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your
operating system).
Preliminary Notes and Legal Information
COPY
Page: 3
4
• : Important information you should know
• : Notes and tips for expert camera use
• (p. xx): Pages with related information (in this example, “xx” represents a
page number)
• Instructions in this guide apply to the camera under default settings.
• For convenience, all supported memory cards are simply referred to as
“the memory card”.
• The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
: Indicates that the function is used when shooting or
viewing still images.
: Indicates that the function is used when shooting or
viewing movies.
Part Names and Conventions in This
Guide
Microphone
Lamp
Flash
1 (Playback) button
Shutter button
Indicator
Power button
GPS antenna
Lens
Shoulder strap/carabiner strap mount
Still Images
Movies
COPY
Page: 4
Part Names and Conventions in This Guide
5
• In this guide, icons are used to represent the corresponding camera
buttons on which they appear, or which they resemble.
• The following camera buttons are represented by icons.
o Up button on back
q Left button on back
m FUNC./SET button on back
r Right button on back
p Down button on back
• On-screen text is indicated in brackets.
Tripod socket
Memory card/battery cover
Memory card/battery cover lock
Waterproof seal
n button
Release button
Strap mount
Terminal cover
Terminal cover lock
Waterproof seal
AV OUT (Audio/video output) /
DIGITAL terminal
HDMITM terminal
DC IN (Power input) terminal
Screen (LCD monitor)
Zoom button
Shooting: j (wide angle)
Playback: g (index)
Speaker
Zoom button
Shooting: i (telephoto)
Playback: k (magnify)
Movie button
Mode selection / Up button
e (Macro) / Left button
FUNC./SET button
h (Flash) / Right button
l (Display) / Down button
COPY
Page: 5
6
Package Contents .............................2
Compatible Memory Cards................2
Preliminary Notes and Legal
Information.......................................3
Part Names and Conventions in
This Guide .......................................4
Contents ............................................6
Contents: Basic Operations...............8
Safety Precautions...........................10
Cautions When Using this Waterproof,
Dustproof, and Shock Resistant
Camera..........................................13
Initial Preparations...........................15
Trying the Camera Out ....................23
Included Software, PDF Manuals ....28
Accessories .....................................34
1 Camera Basics .................37
On/Off ..............................................38
Shutter Button..................................39
Shooting Display Options ................40
FUNC. Menu....................................41
n Menu....................................42
Indicator Display ..............................43
Clock................................................43
2 Using GPS Function ........45
Using GPS Function ........................46
3 Smart Auto Mode .............53
Shooting in Smart Auto Mode..........54
Common, Convenient Features.......62
Image Customization Features........67
Helpful Shooting Features ...............72
Customizing Camera Operation ......75
4 Other Shooting Modes.....77
Specific Scenes............................... 78
Applying Special Effects.................. 82
Special Modes for Other
Purposes....................................... 90
Shooting Various Movies ................ 96
5 G mode .............................99
Shooting in Program AE Mode
(G Mode) .................................... 100
Image Brightness
(Exposure Compensation) .......... 101
Color and Continuous Shooting .... 104
Shooting Range and Focusing...... 109
Flash ............................................. 117
6 Playback Mode ...............121
Viewing.......................................... 122
Browsing and Filtering Images...... 128
Image Viewing Options ................. 131
Protecting Images ......................... 134
Erasing Images ............................. 138
Rotating Images............................ 140
Image Categories.......................... 142
Editing Still Images........................ 146
Editing Movies............................... 151
7 Setting Menu...................153
Adjusting Basic Camera
Functions .................................... 154
8 Accessories....................163
Tips on Using Included
Accessories................................. 164
Optional Accessories .................... 165
Contents
COPY
Page: 6
Contents
7
Using Optional Accessories.......... 168
Printing Images............................. 177
Using an Eye-Fi Card.................... 190
9 Appendix.........................193
Troubleshooting ............................ 194
On-Screen Messages....................198
On-Screen Information..................200
Functions and Menu Tables..........204
Handling Precautions ....................212
Index..............................................213
COPY
Page: 7
8
4 Shoot
Use camera-determined settings (Auto Mode)............................. 54
Focus on faces ............................................................... 54, 79, 112
Without using the flash (Flash Off) ............................................... 65
With myself in the shot (Self-Timer)........................................ 63, 93
Add the shooting date and time (Date Stamp).............................. 66
Movie clips and photos together (Movie Digest)........................... 90
Contents: Basic Operations
Monochrome
(p. 86)
Fish-Eye Effect
(p. 83)
I P
Against Snow
(p. 79)
Portraits (p. 79)
Shooting people well
Matching specific scenes
t
S
Applying special effects
Low Light
(p. 79)
Fireworks
(p. 79)
UnderWater
(p. 78)
Miniature Effect (p. 83) Toy Camera Effect
(p. 85)
Night Scenes
(p. 79)
Vivid Colors
(p. 82)
Poster Effect
(p. 82)
Underwater
Close-ups (p. 78)
COPY
Page: 8
Contents: Basic Operations
9
1 View
View images (Playback Mode) ................................................... 122
Automatic playback (Slideshow)................................................. 132
On a TV ...................................................................................... 168
On a computer.............................................................................. 29
Browse through images quickly.................................................. 128
Erase images.............................................................................. 138
E Shoot/View Movies
Shoot movies.......................................................................... 54, 96
View movies ............................................................................... 122
Fast-moving subjects, slow-motion playback ............................... 96
c Print
Print pictures............................................................................... 177
Save
Save images to a computer.......................................................... 29
COPY
Page: 9
10
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Safety Precautions
Warning Denotes the possibility of serious injury or death.
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
COPY
Page: 10
Safety Precautions
11
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.
• Do not use the optional shoulder strap or carabiner strap while under water.
Straps that accidentally wrap around your neck pose a risk of asphyxiation.
Caution Denotes the possibility of injury.
• When holding the camera by the strap, be careful not to bang it, subject it to strong
impacts or shocks, or let it get caught on other objects.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• Viewing images on the camera screen for prolonged periods may cause
discomfort.
Caution Denotes the possibility of damage to the equipment.
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• This camera cannot be used underwater at a depth greater than 10 m (33 ft.), or
in hot springs and other mineralized waters.
This may cause damage or water leakage.
COPY
Page: 11
Safety Precautions
12
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Keep the covers closed when the camera is not in use.
Storing the camera with the covers open may damage it if liquid or dust gets inside.
• Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
COPY
Page: 12
13
You can enjoy using this camera in the rain, on the beach, while skiing, or
underwater within a depth of 10 m (33 ft.). However, it can not be used in hot
springs or other mineralized waters. Please be aware that Canon is not liable
for any damage to the camera, batteries, memory cards, or saved data
caused by water leakage due to mistaken operation of the product. This
camera is subjected to Canon standard testing. However, it is not guaranteed
that this camera will not damage or malfunction. (For more information about
waterproof, dustproof, and shock resistant specifications, see
“Specifications” in the Getting Started guide.)
• Before shooting with the camera, confirm that the memory card/battery
cover and terminal cover (p. 5) are fully closed (pp. 18, 23). If either cover
is not fully closed, water may enter the camera and damage it.
• Be sure that the waterproof seals (p. 17) inside the covers and the areas
around them are kept free from scratches and foreign objects such as
sand, dirt, or hair. Not doing so may result in leaks. If the waterproof seal
is damaged, do not use the camera underwater.
• Avoid opening and closing the covers while on the beach or near water.
Change memory cards and batteries in a dry place protected from sea
breezes.
• Do not open the covers if the camera is wet. If there is moisture on the
camera, wipe it off with a soft, dry cloth until it is completely dry.
• Do not use this camera in water deeper than 10 m (33 ft.).
• Do not expose the camera to strong impacts or shocks while underwater.
Impacts could cause the covers to open or otherwise compromise the
waterproof ability of the camera.
• This camera is deemed shock resistant by Canon standard testing (see
“Specifications” in the Getting Started guide). However, strong impacts
could scratch the camera or cause it to malfunction. Do not allow the
camera to fall a great distance or expose it to excessive shocks.
• Waterproof performance is not ensured if the camera is dropped or
subjected to impact.
Cautions When Using this Waterproof,
Dustproof, and Shock Resistant Camera
Cautions Before Using This Camera
Cautions While Using This Camera
COPY
Page: 13
Cautions When Using this Waterproof, Dustproof, and Shock Resistant Camera
14
• Rinse off the camera if there is liquid or sand on it after use. The liquid may
soil or corrode the camera, and wiping the camera when sand is on it may
scratch it.
• After using the camera under water
(especially in the ocean) or in sandy or dirty
environments, promptly rinse it well under
fresh water, such as tap water no warmer
than 30 °C (86 °F).
Foreign material or salty residue on the
camera may corrode metal parts or cause
buttons to stick.
• After washing the camera, dry it completely
by wiping it with a soft, dry cloth. After
washing and drying the camera, make sure the buttons and covers do not
stick when pressed or opened and closed.
• To avoid damaging the waterproof seals and causing leaks, keep the seals
free of sand or other foreign material, and do not apply chemicals or grease
to the seals.
• Scratches or cracks in the waterproof seals could cause damage or leaks.
Contact the closest Canon Customer Support Help Desk for immediate
repair. The waterproof seal will be replaced on a chargeable basis.
Cautions After Using This Camera and Camera
Care
About the Waterproof Seals
COPY
Page: 14
15
Prepare for shooting as follows.
Attach the strap.
After attaching the strap to the strap mount,
insert the strap mount into the socket on the
camera and turn until it clicks.
To remove the strap mount, hold the release
button while turning the strap mount
counterclockwise.
To avoid dropping the camera, be sure to
place the strap around your wrist when
shooting. This camera will sink in water.
When shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. Do not rest your
fingers on the flash.
Initial Preparations
Attaching the Strap
Release Button
Holding the Camera
COPY
Page: 15
Initial Preparations
16
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
After aligning the S marks on the battery and
charger, insert the battery by pushing it in
( ) and down ( ).
Charge the battery.
For CB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
For CB-2LYE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
Remove the battery.
After unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
Charging the Battery
CB-2LY
CB-2LYE
COPY
Page: 16
Initial Preparations
17
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (p. 157).
Check the card’s write-protect tab.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Open the cover.
Slide the switch ( ) and open the cover
( ).
Insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Be careful not to damage the waterproof seal
when inserting the battery.
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started
guide.
Inserting the Battery and Memory Card
Terminals
Waterproof
Seal
Battery
Lock
COPY
Page: 17
Initial Preparations
18
Insert the memory card.
Insert the memory card facing as shown until
it clicks into the locked position.
Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Be careful not to damage the waterproof seal
when inserting the memory card.
Close the cover.
Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.
Make sure the lock returns to the position
shown, with the red mark no longer visible.
Label
Red Mark
• Do not open the covers when the camera is wet or submerged in
water. If there is moisture on the camera, wipe it off with a soft, dry
cloth until it is completely dry.
• Be sure that the waterproof seals and the areas around them are kept
free from scratches and foreign objects such as sand, dirt, or hair.
Not doing so may result in leaks.
• Avoid opening and closing the covers while on the beach or near
water. Change memory cards and batteries in a dry place protected
from sea breezes.
COPY
Page: 18
Initial Preparations
19
Remove the battery.
Open the cover and press the battery lock in
the direction of the arrow.
X The battery will pop up.
Remove the memory card.
Push the memory card in until it clicks, and
then slowly release it.
X The memory card will pop up.
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
Press the power button.
X The [Date/Time] screen is displayed.
Removing the Battery and Memory Card
Setting the Date and Time
COPY
Page: 19
Initial Preparations
20
Set the date and time.
Press the qr buttons to choose an option.
Press the op buttons to specify the date
and time.
When finished, press the m button.
Set the local time zone.
Press the qr buttons to choose your local
time zone.
Finish the setup process.
Press the m button when finished. After a
confirmation message, the setting screen is
no longer displayed.
To turn off the camera, press the power
button.
• Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons.
COPY
Page: 20
Initial Preparations
21
Adjust the date and time as follows.
Access the camera menu.
Press the n button.
Choose [Date/Time].
Press the zoom buttons to choose the 3 tab.
Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
Follow step 2 on p. 20 to adjust the settings.
Press the n button to close the menu.
Changing the Date and Time
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 165),
even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 19 to set the date and time.
• Automatic date and time updating is possible using GPS (p. 52).
COPY
Page: 21
Initial Preparations
22
The display language can be changed as needed.
Enter Playback mode.
Press the 1 button.
Access the setting screen.
Press and hold the m button, and then
immediately press the n button.
Set the display language.
Press the opqr buttons to choose a
language, and then press the m button.
X Once the display language has been set, the
setting screen is no longer displayed.
Display Language
• The current time is displayed if you wait too long in step 2 after pressing the m
button before you press the n button. In this case, press the m button to
dismiss the time display and repeat step 2.
• You can also change the display language by pressing the n button and
choosing [Language ] on the 3 tab.
COPY
Page: 22
23
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Make sure the covers are closed.
Make sure that both the memory card/battery
cover lock and terminal cover lock return to
the positions shown, with the red marks no
longer visible.
If either cover is not fully closed, water may
enter the camera when it gets wet, which may
damage it.
Turn the camera on.
Press the power button.
X The startup screen is displayed.
Enter A mode.
Press the o button, press the op buttons to
choose A, and then press the m button.
X Icons representing the scene and image
stabilization mode are displayed in the upper
right of the screen.
X Frames displayed around any subjects that
are detected indicate that they are in focus.
Trying the Camera Out
Shooting (Smart Auto)
Still Images Movies
Red Mark
COPY
Page: 23
Trying the Camera Out
24
Compose the shot.
To zoom in and enlarge the subject, press the
i (telephoto) zoom button, and to zoom
away from the subject, press the j (wide
angle) zoom button.
Shoot.
Shooting Still Images
Focus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
Shoot.
Press the shutter button all the way down.
X As the camera shoots, a shutter sound is
played, and in low-light conditions, the flash
fires automatically.
X Your shot remains displayed on the screen
for about two seconds.
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
AF Frames
COPY
Page: 24
Trying the Camera Out
25
Shooting Movies
Start shooting.
Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time.
X Black bars displayed on the top and bottom
edges of the screen indicate image areas not
recorded.
Once recording begins, you can take your
finger off the movie button.
Finish shooting.
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
X Recording will stop automatically when the
memory card becomes full.
After shooting images or movies, you can view them on the screen as follows.
Enter Playback mode.
Press the 1 button.
X Your last shot is displayed.
Elapsed Time
Viewing
COPY
Page: 25
Trying the Camera Out
26
Browse through your images.
To view the previous image, press the q
button. To view the next image, press the r
button.
To access Scroll Display mode, press and
hold the qr buttons for at least one second.
In this mode, press the qr buttons to browse
through images.
To return to single-image display, press the
m button.
To browse images grouped by shooting date,
press the op buttons in Scroll Display mode.
Movies are identified by a icon. To play
movies, go to step 3.
Play movies.
Press the m button, press the op buttons to
choose , and then press the m button
again.
X Playback now begins, and after the movie is
finished, is displayed.
To adjust the volume, press the op buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
COPY
Page: 26
Trying the Camera Out
27
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Choose an image to erase.
Press the qr buttons to choose an image.
Erase the image.
Press the m button, press the op buttons
to choose a, and then press the m button
again.
After [Erase?] is displayed, press the qr
buttons to choose [Erase], and then press the
m button.
X The current image is now erased.
To cancel erasure, press the qr buttons to
choose [Cancel], and then press the m
button.
Erasing the Images
• You can also erase all images at once (p. 138).
COPY
Page: 27
28
The software and PDF manuals on the included CD-ROM are introduced
below, with instructions for installation, saving images to a computer, and
using the PDF manuals.
After installing the software on the CD-ROM, you can do the following things
on your computer.
ImageBrowser EX
Import images and change camera settings
Manage images: view, search, and organize
Print and edit images
Update to the latest software version with the auto update function
Using the included software, you can update to the latest version, and
download new functions via the Internet (some software excluded). Be sure
to install the software on a computer with an Internet connection so you can
use this function.
Installing the software on the CD-ROM will also install the following PDF
manuals on your computer.
Camera User Guide
Once you are familiar with the information in Getting Started, refer to this for a more in-
depth understanding of camera operation.
ImageBrowser EX User Guide
Refer to this guide when using the included software.
This guide can be referenced from the ImageBrowser EX Help function.
Included Software, PDF Manuals
Features of the Included Software
Auto Update Function
• Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
• This function may not be available depending on the camera or
region you live in.
PDF Manuals
• Depending on the country or region where you purchased your camera, the
ImageBrowser EX User Guide may not be accessible from the Help function. In
such cases, it will either be included on the CD-ROM bundled with your camera,
or you can download the latest version from the Canon website.
COPY
Page: 28
Included Software, PDF Manuals
29
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
* In Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed.
Installation may take some time, depending on computer performance.
Macintosh
System Requirements
Operating System
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Computer
Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection
Processor Still images: 1.6 GHz or higher, Movies: Core 2 Duo 2.6 GHz or higher
RAM
Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows Vista (64 bit, 32 bit):
1 GB or more (still images), 2 GB or more (movies)
Windows XP: 512 MB or more (still images), 2 GB or more (movies)
Interfaces USB
Free Hard Disk
Space
440 MB or more*
Display 1024 x 768 resolution or higher
Operating System Mac OS X 10.6
Computer
Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection
Processor
Still images: Core Duo 1.83 GHz or higher, Movies: Core 2 Duo
2.6 GHz or higher
RAM 1 GB or more (still images), 2 GB or more (movies)
Interfaces USB
Free Hard Disk
Space
550 MB or more
Display 1024 x 768 resolution or higher
• Check the Canon website for the latest system requirements, including
supported OS versions.
COPY
Page: 29
Included Software, PDF Manuals
30
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest version
and download new functions via the Internet (some software excluded), so be
sure to install the software on a computer with an Internet connection.
Insert the CD-ROM in the
computer’s CD-ROM drive.
Insert the included CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) in the
computer’s CD-ROM drive.
On a Macintosh computer, after inserting the
disc, double-click the desktop disc icon to open
it, and then double-click the icon displayed.
Begin the installation.
Click [Easy Installation] and follow the on-
screen instructions to complete the
installation process.
When a message is displayed
prompting you to connect the
camera, connect it to a computer.
With the camera turned off, open the cover
( ). With the smaller plug of the included
interface cable (p. 2) in the orientation
shown, insert the plug fully into the camera
terminal ( ).
Installing the Software and PDF Manuals
COPY
Page: 30
Included Software, PDF Manuals
31
Insert the larger plug of the interface cable in
the computer’s USB port. For details about
USB connections on the computer, refer to
the computer user manual.
Install the files.
Turn the camera on, and follow the on-screen
instructions to complete the installation
process.
X The software will connect to the Internet to
update to the latest version and download
new functions. Installation may take some
time, depending on computer performance
and the Internet connection.
Click [Finish] or [Restart] on the screen after
installation and remove the CD-ROM when
the desktop is displayed.
Turn the camera off and disconnect the cable.
• When not connected to the Internet, there are the following limitations.
- The screen in step 3 will not be displayed.
- Some functions may not be installed.
- The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM
and follow the on-screen installation instructions for each. Doing so will ensure
that each camera will receive the correct updates and new functions via the auto
update function.
COPY
Page: 31
Included Software, PDF Manuals
32
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Connect the camera to the
computer.
Follow step 3 on p. 30 to connect the camera
to a computer.
Turn the camera on to access
CameraWindow.
Press the 1 button to turn the camera on.
On a Macintosh computer, CameraWindow is
displayed when a connection is established
between the camera and computer.
For Windows, follow the steps introduced
below.
In the screen that displays, click the link
to modify the program.
Choose [Downloads Images From Canon
Camera using Canon CameraWindow] and
then click [OK].
Double click .
Saving Images to a Computer
COPY
Page: 32
Included Software, PDF Manuals
33
Save the images to the computer.
Click [Import Images from Camera], and then
click [Import Untransferred Images].
X Images are now saved to the Pictures folder on
the computer, in separate folders named by date.
After images are saved, close
CameraWindow, press the 1 button to turn
the camera off, and unplug the cable.
For instructions on viewing images on a
computer, refer to the ImageBrowser EX
User Guide (p. 28).
Use the included CD-ROM to install the PDF manuals, and a shortcut for the
camera manual will be created on the desktop.
Adobe Reader is required to view the PDF manuals.
CameraWindow
• In Windows 7, if the screen in step 2 is not displayed, click the icon in the taskbar.
• To start CameraWindow in Windows Vista or XP, click [Downloads Images From
Canon Camera using Canon CameraWindow] on the screen displayed when you turn
the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and
choose [All Programs] X [Canon Utilities] X [CameraWindow] X [CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2, click
the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
• Although you can save images to a computer simply by connecting your camera to
the computer without using the included software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information, depending
on the operating system version, the software in use, or image file sizes.
- GPS log files (p. 49) may not be saved correctly.
- Some functions provided by the included software may not be available, such
as editing movies or returning images to the camera.
Using the PDF Manuals
• It may not be possible to install the software and PDF manuals on computers
that do not meet the system requirements (p. 29). To view the manuals on these
computers, copy the PDF files in the Readme folder on the CD-ROM directly to
a computer capable of using Adobe Reader.
COPY
Page: 33
34
Accessories
Cable
Included Accessories
TV/Video
System
Memory Card Card Reader
Windows/
Macintosh
Computer
Interface Cable IFC-400PCU*1
Wrist Strap
WS-DC8
DIGITAL CAMERA
Solution Disk
Battery Pack NB-6L*1
(with terminal cover)
HDMI Cable HTC-100
Battery Charger
CB-2LY/CB-2LYE*1
Power
Accessories Kit AKT-DC2
*1Also available for purchase separately.
*2High-Power Flash HF-DC1 also supported.
*3The included DC coupler is not used.
*4These accessories can also be used with the camera: ACK-DC10, ACK-DC30,
ACK-DC60, ACK-DC70, ACK-DC80, and ACK-DC90.
Soft Case
SC-DC80
AV Cable AVC-DC400
Carabiner
Strap
Shoulder
Strap
Silicone
Jacket
Strap Mount
AC Adapter Kit
ACK-DC40*3*4
Float
COPY
Page: 34
Accessories
35
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/
or explosion of a battery pack). Please note that this warranty does not apply to repairs
arising out of the malfunction of non-genuine Canon accessories, although you may
request such repairs on a chargeable basis.
Cases
Flash Unit
High-Power Flash
HF-DC2*2
Waterproof Case
WP-DC45
Soft Case
SC-DC80
Canon PictBridge-Compatible Printers
COPY
Page: 36
37
Camera Basics
Basic camera operations and features
1
COPY
Page: 37
38
Shooting Mode
Press the power button to turn the camera on
and prepare for shooting.
To turn the camera off, press the power
button again.
Playback Mode
Press the 1 button to turn the camera on
and view your shots.
To turn the camera off, press the 1 button
again.
As a way to conserve battery power, the camera automatically deactivates
the screen and then turns itself off after a specific period of inactivity.
The screen will turn off about a minute after the camera is last operated, and
the indicator is lit in green. In about two more minutes, the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off and
the indicator is green, press the shutter button halfway (p. 39).
The camera turns itself off automatically after about five minutes of inactivity.
On/Off
• To switch to Playback mode from Shooting mode, press the 1 button.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway (p. 39).
Power-Saving Features (Auto Power Down)
Power Saving in Shooting Mode
Power Saving in Playback Mode
• You can deactivate these power-saving features if you prefer (p. 160).
• You can also adjust the timing of screen deactivation (p. 160).
COPY
Page: 38
39
To ensure your shots are in focus, always press the shutter button lightly
(halfway) initially. Once the subject is in focus, press the button all the way
down to shoot.
In this manual, shutter button operations are described as pressing the button
halfway or all the way down.
Press halfway. (Press lightly to
focus.)
Press the shutter button halfway. The camera
beeps twice, and AF frames are displayed
around image areas in focus.
Press all the way down. (From the
halfway position, press fully to shoot.)
X The camera shoots, as a shutter sound is
played.
Keep the camera still until the shutter sound
ends.
Shutter Button
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
COPY
Page: 39
40
Press the p button to view other information on the screen, or to hide the
information. For details on the information displayed, see p. 200.
Shooting Display Options
Information is
displayed
No information is
displayed
• Screen brightness is automatically increased by the night display function when
you are shooting under low light, making it easier to check how shots are
composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
• For playback display options, see p. 125.
COPY
Page: 40
41
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(pp. 206 – 207) or playback mode (p. 211).
Access the FUNC. menu.
Press the m button.
Choose a menu item.
Press the op buttons to choose a menu
item, and then press the m or r button.
In some menu items, functions can be
specified simply by pressing the m or r
button, or another screen is displayed for
configuring the function.
Choose an option.
Press the op buttons to choose an option.
Options labeled with a icon can be
configured by pressing the n button.
To return to the menu items, press the q
button.
Finish the setup process.
Press the m button.
X The screen before you pressed the m button
in step 1 is displayed again, showing the
option you configured.
FUNC. Menu
Menu Items
Options
• To undo any accidental setting changes, you can restore the camera’s default
settings (p. 162).
COPY
Page: 41
42
Configure a variety of camera functions through other menus as follows. Menu
items are grouped by purpose on tabs, such as shooting (4), playback (1),
and so on. Note that available settings vary depending on the selected shooting
or playback mode (pp. 208 – 211).
Access the menu.
Press the n button.
Choose a tab.
Press the zoom buttons or the qr buttons to
choose a tab.
Choose a setting.
Press the op buttons to choose a setting.
To choose settings with options not shown,
first press the m or r button to switch
screens, and then press the op buttons to
select the setting.
Press the n button to restore the
previous screen.
Choose an option.
Press the qr buttons to choose an option.
Finish the setup process.
Press the n button to return to the screen
displayed before you pressed the n
button in step 1.
n Menu
• To undo any accidental setting changes, you can restore the camera’s default
settings (p. 162).
COPY
Page: 42
43
The indicator on the top of the camera (p. 4) lights up or blinks depending on
the camera status.
You can check the current time.
Press and hold the m button.
X The current time appears.
If you hold the camera vertically while using
the clock function, it will switch to vertical
display. Press the qr buttons to change the
display color.
Press the m button again to cancel the clock
display.
Indicator Display
Color
Indicator
Status
Camera Status
Green
On Connected to a computer (p. 32), or display off
Blinking
Starting up, recording/reading/transmitting images, shooting
long exposures (p. 94), or logger active (p. 49)
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
Clock
• When the camera is off, press and hold the m button, then press the power
button to display the clock.
COPY
Page: 44
45
Using GPS Function
Basic GPS operations and features
2
COPY
Page: 45
46
Camera location information (latitude, longitude, and elevation) based on
acquired GPS signals can be added to the still images and movies you shoot,
or this information can be logged separately. In addition to geotagging, the
camera clock can be updated automatically.
Before using GPS functions, make sure the date, time, and local time zone
on the camera are set correctly, as described in “Setting the Date and Time”
(p. 19).
GPS: Global Positioning System
Use the camera outside, where there is an
unobstructed view of the sky. (GPS functions
will not work correctly indoors or in other
areas away from GPS coverage (p. 47).)
Hold the camera correctly, as shown, for
easier GPS signal reception.
Keep your fingers or other objects off the
GPS antenna.
For better GPS signal reception, try to keep the GPS antenna pointing up,
toward the sky. When carrying the camera in a bag, put it in the bag with the
GPS antenna pointing up, and try to put the camera in an outer section of bag.
Using GPS Function
When using GPS functions, keep the following points in mind.
• In certain countries and regions, the use of GPS may be restricted.
Therefore, be sure to use GPS in accordance with the laws and
regulations of your country or region. Be particularly careful when
traveling outside your home country.
• Be careful about using GPS features where the operation of electronic
devices is restricted, because the camera will receive GPS signals.
• Others may be able to locate or identify you by using location data in
your geotagged still images or movies. Be careful when sharing these
images or GPS log files with others, as when posting images online
where many others can view them.
Where to Use GPS, and How to Hold the
Camera
GPS Antenna
How to Carry the Camera When Using the Logger
Function
COPY
Page: 46
Using GPS Function
47
• Location information may not be recorded, or inaccurate information may
be recorded where GPS signal coverage is poor, such as in the following
places.
zIndoors zunderground znear buildings or in valleys zin tunnels or
forests znear high-voltage power lines or mobile phones operating on the
1.5 GHz band zinside a bag or suitcase zunderwater zwhen traveling
across great distances zwhen traveling through different environments
• Even in other places, GPS satellite movement may interfere with geotagging
and cause missing or inaccurate location information, or the information may
indicate that the camera has been used elsewhere even if it has not.
• GPS signal reception may take longer after battery replacement, or when
you have not used GPS functions for some time.
Configure the setting.
Press the m button, choose in the menu,
and choose (p. 41).
To restore the original setting, repeat this
process but choose .
Check the reception status.
Use the camera outside, where there is an
unobstructed view of the sky. (GPS functions
will not work correctly indoors or in other
areas away from GPS coverage (p. 47).)
Check GPS reception status as shown on the
screen.
* When you have activated the logger (p. 49), is also displayed.
Places With Poor GPS Coverage
Using GPS Function
OFF
OFF
Reception Status Display
(on) GPS signal received. Location can be recorded.*
(blinking) Looking for GPS signal.*
(on) No GPS signal.
COPY
Page: 47
Using GPS Function
48
• When GPS signal reception is not possible indoors or in other places away
from coverage (p. 47), try going outside where there is an unobstructed
view of the sky. Hold the camera correctly (p. 46) and point the GPS
antenna up at the sky.
• will normally be displayed within a few minutes when the camera is
used in areas with ample GPS coverage, such as outdoor areas with an
unobstructed view of the sky. If is not displayed, move to an area
without obstructions (such as buildings) between the camera and GPS
satellites and wait a few minutes until it appears.
• You can also configure GPS settings from the menu (p. 42).
The still images and movies you shoot can be geotagged, automatically
adding latitude, longitude, and elevation information. You can review the
recorded location information on the camera (p. 126). Using the provided
software (p. 2), you can also view the locations on a map, with the still images
and movies shown next to them.
Activate GPS.
Follow steps 1 – 2 on p. 47 to configure the
setting.
Shoot.
The still images and movies you shoot are now
geotagged, and you can review the location
information as described in “GPS Information
Display” (p. 126).
Tips When is Displayed
Geotagging Images While Shooting
• In addition to geotagging your shots, you can also tag shots with the shooting
date and time (p. 126) in UTC format (p. 52).
• Geotagging applies the initial camera location and shooting date and time, as
acquired when you begin shooting a movie.
• For movies made by using Movie Digest (p. 90), geotagging applies the initial
camera location and shooting date and time, as acquired for the first movie shot
that day.
COPY
Page: 48
Using GPS Function
49
You can keep a record of where the camera was taken by using location
information acquired from GPS satellite signals over a period of time. Daily
location and time data is logged to a file, separate from image data. Log files
can be reviewed on the camera (p. 51), and with the provided software (p. 2),
you can use log files to follow the route taken with the camera on a map.
Since the date will be updated, and information location will be logged
continually whether or not the camera is on, battery life will be reduced even
when the camera is off. You may find the battery to be nearly depleted when
turning the camera on. Charge the battery as needed, or keep a spare
charged battery with you.
Activate GPS.
Follow steps 1 – 2 on p. 47 to configure the
setting.
Configure the setting.
Press the n button, and then press the
qr buttons to choose [On].
To restore the original setting, repeat this
process but choose [Off].
Finish the setup process.
When you press the m button, a message
about the logger is displayed. Be sure to read
the message.
X The icon shown with your shots indicates
the GPS reception status at that time (p. 47).
X The logger function will operate, and the
date, time and location information based on
signals acquired from GPS satellites will be
logged to the camera.
The logger will continue to function even
when the camera is turned off.
Logging Camera Location Data
COPY
Page: 49
Using GPS Function
50
Save the GPS log files to the
memory card.
When you turn off the camera, a message
about the logger is displayed. The location
information, date and time will be saved to the
memory card. This information will not remain
on the camera.
If the camera is off and you want to remove
the memory card when the logger is being
used, turn the camera on, then turn it off
again before removing the memory card.
The location information, date and time will
be saved to the memory card when you do
any of the following things.
-Display the log files
-Display the date/time setting screen
-Display the time zone setting screen
• Removing the battery after step 4 will deactivate the logger. To
reactivate the logger after battery replacement, turn the camera on
and then off again.
• Saving GPS log files is not possible when the memory card write-
protect tab is in the locked position. Make sure the tab is set to the
unlocked side.
• Location information, date and time will be saved to the memory card
when the camera is turned off or when displaying log files (p. 51). For
this reason, if the camera is off and you want to remove the memory
card when the logger is being used, turn the camera on, then turn it
off again before removing the memory card.
• When using the logger function, exercise caution when turning the
camera over to another person, as the date and time, and logged
location information will remain on the camera until it is saved to a
memory card (even if the battery is depleted).
• Be careful when formatting memory cards (p. 157), because the GPS
log file will also be erased.
• You can also configure logger settings from the menu (p. 42).
COPY
Page: 50
Using GPS Function
51
You can check the GPS log files saved to a memory card on the camera.
Access the [GPS Settings] screen.
Press the n button, choose [GPS
Settings] on the 3 tab (p. 42).
Access the [Display Log Files]
screen.
Choose [Display Log Files], and then press
the m button (p. 42).
Choose the log file to examine.
X To the right of today’s date, the time elapsed
from the last time location information was
recorded is displayed.
Choose the desired date and press the m
button. The recorded latitude, longitude, time,
and number of logs acquired that day are
displayed.
Checking the GPS Log Files
Number of Logs Acquired
Latitude Longitude Time
COPY
Page: 51
Using GPS Function
52
You can have the date and time for the configured time zone (pp. 19, 160)
automatically updated when the camera receives GPS signals.
Your shots will be tagged with the shooting date/time as updated (p. 48, in
UTC format), along with location information (p. 126).
Set [GPS] to [On].
Follow steps 1 – 2 on p. 47 to configure the
setting.
Configure the setting.
Press the n button, choose [GPS Auto
Time] on the 3 tab, and then choose [On]
(p. 42).
To set daylight saving time, follow the steps
on p. 20.
[Update completed] is shown on the [Date/Time] screen in step 2 on p. 20
after the date and time are automatically updated. [GPS Auto Time: On] is
shown if a GPS signal has not been received yet.
Automatically Updating the Date and Time
Confirming Automatic Time Updating
• When [GPS Auto Time] is set to [On], you cannot change the date
and time by accessing the [Date/Time] screen as described on p. 21,
because this information will be updated automatically.
COPY

Question & answers

There are no questions about the Canon Powershot D20 yet.

Ask a question about the Canon Powershot D20

Have a question about the Canon Powershot D20 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Canon Powershot D20. Please make sure that you describe your difficulty with the Canon Powershot D20 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.