Canon DP-V3120 manual

Select a language NL 100%

View a manual of the Canon DP-V3120 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Canon
  • Product: Speaker
  • Model/name: DP-V3120
  • Filetype: PDF
  • Available languages:

Table of Contents

Page: 0
• Before use, be sure to read this guide, including the safety and handling precautions.
• Reading this guide will help you learn to use the video display properly.
• Store this guide safely so that you can use it in the future. English
Video Display Setup Guide
Page: 1
2
Table of Content
Introduction   3
Supplied Accessories   3
Conventions used in this manual   3
Trademarks   3
Important Usage Instructions   4
Safety Instructions and Handling Precautions   5
Names and functions of parts   8
Setting Up   10
Carrying the video display   10
Preventing from Tipping   10
Mounting the Main Unit on a Stand or Wall   11
Removing/attaching the stand   12
Attaching/detaching the AC Power Cord Clamp (provided)   13
Connecting the Main Unit to Input Devices   14
Turning on the Main Unit's power   15
Basic operations to use the OSD menu   15
Main specifications/Performance   16
Dimensions   18
About the User Manual for the Display
• Setup Guide (this document): This describes the items that should be followed to ensure the display can be
used correctly and safely, and how to install and operate the display. Please read before using the display.
• Operation Guide (PDF electronic manual): This explains the functions of this display and how to set it up.
Please download this from the Canon website.
https://www.usa.canon.com/internet/portal/us/home/support/
https://www.canon-europe.com/support/
https://www.canon.com.au/support
https://sg.canon/en/support
Page: 2
3
English
Introduction
Thank you for purchasing Canon Video Display. This device is a commercial-use display capable of supporting a wide
range of workflows from shooting, through to editing in video production, for both digital cinema and broadcasting.
Supplied Accessories
The following items are supplied with this product. Please check before using.
AC Power Cord AC Power Cord clamp
HC-01
Setup Guide
(this document)
Conventions used in this manual
: Indicates a reference page.
Note: Indicates a note.
Reference: Indicates reference information.
CAUTION: Indicates an item you must observe.
Trademarks
• HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the U.S. and other countries.
• VESA is a registered trademark or trademark of Video Electronics Standards Association in the U.S. and other
countries.
• Other product and company names herein are trademarks or registered trademarks of their respective owners.
Page: 3
4
Important Usage Instructions
For the customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes
or modifications should be made, you could be required to stop operation of the equipment.
Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Canon U.S.A Inc.
One Canon Park, Melville, NY 11747, U.S.A.
Tel No. (631)330-5000
For the customers in Canada
CAN ICES-3 (A) / NMB-3 (A)
For the customers in Europe
Warning;
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste,
according to the WEEE Directive (2012/19/EU) and national legislation. This product should
be handed over to a designated collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized collection site for recycling waste
electrical and electronic equipment (EEE). Improper handling of this type of waste could have
a possible negative impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time, your cooperation in the
correct disposal of this product will contribute to the effective usage of natural resources. For
more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste
disposal service. For more information regarding return and recycling of WEEE products, please
visit www.canon-europe.com/weee.
Page: 4
5
English
Safety Instructions and Handling Precautions
Be sure to read these instructions in order to operate
the product safely.
Follow these instructions to prevent injury or harm to the
operator of the product or others.
WARNING
Denotes the risk of serious injury or death.
• Do not disassemble or modify the video display.
Inside, the video display contains high-voltage/extremely
hot/movable parts that can cause fire, electric shock,
burns or injury.
• Do not insert foreign objects or liquids into the
video display.
If metallic objects, flammable objects or liquids get
inside the video display, this may cause fire, electric
shock or malfunction.
• Be sure to use the correct voltage.
Using a power source with a voltage other than that
specified in this instruction manual can cause fire or
electric shock.
Always use the supplied (or specified) AC power cord.
For your safety, do not use this AC power cord to
power other equipment.
• Do not use the video display in the following
places.
Doing so can cause fire, electric shock or malfunction.
-
- Close to a window when it is raining or snowing.
-
- Places subject to high humidity and dust.
-
- Places exposed to water and moisture such as
bathrooms, kitchens etc.
-
- Places directly exposed to dust, smoke or steam,
or nearby heaters and humidifiers.
-
- Places where flammable gases may be present.
-
- Places exposed to direct sunlight.
• Do not install or store the video display in places
exposed to direct sunlight.
The video display's internal temperature can rise and
cause fire or malfunction.
• Do not damage the power cord.
Do not place heavy objects on the power cord and do
not pull, modify, heat or tie the power cord in a bundle.
The power cord may be damaged (exposed or broken
wires, etc.) and cause fire or electric shock.
• When using three-pronged plugs with a ground
connection:
Always connect the ground prong.
A short circuit occurring when the ground prong is not
connected can cause fire or electric shock.
The video display's power cable features a three-
pronged plug.
• Do not touch the power cable or plug during
lightning storms.
This can cause electric shock.
• Do not touch the power cable or plug with wet
hands.
This can cause electric shock.
• Observe the following precautions regarding the
power source and power plug.
Failing to do so can cause fire or electric shock.
-
- Insert the power plug fully and securely into the
power outlet. Do not use a damaged power cable
or plug or a loose power outlet.
-
- Hold the plug itself when unplugging the power
cable. Pulling the power cord can damage the
power cord and cause fire or electric shock.
-
- Periodically remove any dust buildup from the
power plug.
-
- Do not obstruct the access to the power plug by
placing other objects around it.
-
- Do not connect many power cords to the same
power outlet.
-
- When using an extension cable, make sure the total
power consumption of the devices you connect
to the extension cable does not exceed its rated
power.
• If the video display was dropped or exposed to a
strong impact, turn it off immediately and unplug
the power plug.
The video display is a precision instrument and
continued use in such case can result in a short circuit
and cause fire or electric shock.
• Before starting any maintenance work, turn off the
video display and unplug the power plug.
Failing to do so can cause electric shock.
• In any case of unusual circumstances such as the
presence of smoke or abnormal sounds or smell,
immediately turn off the video display and unplug
the power plug.
Continued use can cause fire or electric shock.
Page: 5
Safety Instructions and Handling Precautions
6
• Before moving, installing, removing or connecting
the video display to peripheral devices, turn off
the video display and all connected devices and
unplug their power plugs.
Failing to do so can cause fire, electric shock or
malfunction.
• For your safety, unplug the power plug from the
power outlet when not using the video display for
extended periods of time.
Dust buildup on the power plug can cause fire.
• Do not obstruct the access to the power plug so it
can always be easily unplugged.
Failing to disconnect the power plug immediately after
unusual circumstances have occurred can cause fire or
electric shock.
• Do not block the ventilation holes.
Blocking the video display's vent holes can result in the
internal temperature rising and cause fire or malfunction.
Observe the following precautions to ensure proper
ventilation.
-
- Do not push the video display into narrow confined
spaces or enclosures.
-
- Do not wrap the video display in cloth or other
materials.
-
- Do not place the video display facing up, lay it
sideways or upside-down.
• If the screen is damaged, do not touch the leaking
liquid crystal or other internal liquids.
If the LCD panel is damaged and liquid crystal or other
internal liquids leak out, do not put the liquids in the
mouth, inhale or swallow it or let it come in contact with
the skin. If the liquids get in the eye or mouth, wash it
immediately with plenty of water. If the liquids come in
contact with the skin or clothes, wipe them immediately
with alcohol etc. and wash the exposed area with
soap. Leaving the liquids untreated can cause injury or
damage.
• Use the carrying handle to carry the video display.
When carrying the video display, be sure to hold it by
the carrying handle. Failure to do so could cause the
display to fall and cause an injury.
• Keep all packaging material out of the reach of
children.
Packaging material tightly wrapped around someone's
head can result in strangulation or suffocation.
CAUTION
Denotes the risk of injury.
• Do not place any objects on the video display and
do not climb on it.
The video display can tip or fall and cause injury.
• Do not install the video display on an unstable
surface.
Installing the video display on a wobbly or slanted
surface can cause the display to tip or fall and cause
injury. Thoroughly check also the strength and
sturdiness of the surface where the video display will be
placed or installed.
• When unpacking, carrying, installing, or
connecting the main unit, at least two people are
required.
The video display can tip or fall and cause injury.
• Take precautions to prevent the video display from
tipping or falling.
In an earthquake the video display can tip or fall. For
your safety, when installing the video display on a TV
stand or other furniture, take precautionary measures to
secure the video display against tipping or falling. Taking
such measures can be effective in reducing the risk of
injury or damage but the effectiveness of the prevention
measures cannot be guaranteed in all earthquakes.
• Follow the procedure in this manual to install the
video display.
If the installation is not performed correctly, the video
display may tilt or fall and cause injury.
• Inspect the condition of the installation about
once per year.
An inadequate fitting or mounting can cause the video
display to fall and cause injury.
• When using headphones, set the volume at a safe
level.
Listening through headphones at a high volume can
harm your hearing.
• Do not look at the screen for long periods of time.
Doing so can cause conditions such as eye strain or
decreased vision. When looking at the screen for long
periods of time, rest periodically. If you feel discomfort
after continued usage, stop using the video display
immediately and rest. If you continue to feel discomfort,
consult a physician.
Page: 6
Safety Instructions and Handling Precautions
7
English
When Using the Main Unit
• The screen may be damaged if it is left facing
strong source of light. Please take precautions
when placing it near a window.
• Do not press firmly on the screen, scratch it or
place an object on the screen. It can cause non-
uniformity or damage to the panel.
• The screen and cabinet may become warm during
use. Note this does not constitute a malfunction.
• Viewing the display for prolonged periods of time
may lead to eye strain or decreased vision. Please
ensure to take rest periodically to avoid these
symptoms.
• Refer to Recommendation ITU-R BT.1702
"Guidance for the reduction of photosensitive
epileptic seizures caused by television" and related
guidelines.
About Backlight
The backlight has a limited service life so its brightness
may degrade and color may change due to aging.
About Temporary Screen burn-in
If a stationary image is displayed for a prolonged period,
screen burn-in may occur where you see remnants of
what was displayed. This is a characteristic of LCD and
is not a failure. However, this is only temporary and will
disappear when playing video.
About the LCD screen
The screen is produced using extremely high-precision
manufacturing techniques, with more than 99.99% of
the pixels operating to specification. Less than 0.01% of
the pixels may occasionally misfire or appear as black,
red, blue or green dots. In addition, this tendency may
increase through long term use due to characteristic of
the LCD panel. These do not constitute a malfunction.
Condensation
If this equipment is brought into a warm room while it
is cold or if the room is heated suddenly, condensation
may form on the surface or inside the equipment. Note
that the equipment may be damaged if it is used under
such condition.
If condensation has formed on the surface or inside
the equipment, do not use the video display as it may
get damaged. Turn the power off and wait until the
condensation has evaporated before using the video
display.
Cleaning
• Before cleaning, be sure to unplug the power plug.
• The screen has a special surface treatment, avoid
touching it directly with your hand. In addition,
never affix adhesive objects such as seals.
• Never use alcohol or benzene, thinner, acidic
cleaning solution, alkaline cleaning solution,
abrasive or chemical wipes because these will
damage the screen.
• If the screen is dirty, wipe gently with soft dry cloth
such as cleaning cloth or eye glasses cleaning
cloth. Wiping the screen too hard may cause
unevenness on the screen or damage the LCD
panel. The screen may be scratched if wiped too
hard with a cleaning cloth with foreign particles
attached.
• When the screen is extremely dirty, wipe with
soft cloth such as cleaning cloth or eye glasses
cleaning cloth moistened with water-diluted neutral
detergent.
• Use a blower to remove dust from the surface of
the screen.
• Wipe dirt on cabinet with a soft cloth. If the screen
is very dirty, use a moistened cloth with water
or mild detergent diluted with water. Do not use
alcohol, benzene, paint thinner, or pesticides
as they may damage the surface finish or erase
characters on the cabinet.
Disposing
• Do not dispose together with normal waste. Do not
include the video display in waste that will be taken
to landfill.
• Observe the rules and regulations of your local
authorities when disposing.
Page: 7
8
Names and functions of parts
Front face of the main unit
1 1
8 9
5
4
3
2 6 7
1 Front stand
2 Channel (CH) button   CH1 to CH3
• You can switch between the registered channels  
(settings related to input signal) with a single push.
3	
CDL button
• Switches to CDL mode.
4 Function (F) button   F1 to F8
• Registered functions are executed with a single push.
5 MENU button, jog dial, RESET button
• Changes the OSD menu settings.
6 (Power) button
• Turns the power on and off.
7 Power indicator
8	
USB port
• For connecting USB memories, HUBs, color grading
controllers (Tangent Wave's Element-Tk), or wireless
LAN devices (Wi-Fi adapters).
9 Headphone terminal
About the power indicator
Displays the status of the main unit. The power indicator will flash during firmware updates or when an error is
detected even if it is set to [Off].
Off: when power supply is not connected
Green lit: when a power supply is connected and the video display's power is on
Green flash: during calibration or firmware update
Amber lit: during standby (power supply is connected and the power to the video display is off)
Amber flash: when error is detected
Page: 8
Names and functions of parts
9
English
Back face of the main unit
A
f
A
d
A
j A
k
A
q A
q
A
a
A
g
A
h
A
s
A
q Carrying handle
A
a Rear stand
A
s	
SDI output terminal
• Passes through output of the signal input to A
d.
A
d SDI input terminal
• Inputs the SDI signal.
A
f	
REMOTE terminal
• Connects an external control device.
A
g	
LAN (10/100 BASE) terminal
• Connects an external control device or Canon display.
A
h Cord clamp mounting hole
A
j AC power input terminal
A
k HDMI input terminal
• Inputs the HDMI signal.
CAUTION
• Do not use the HUB when connecting a wireless LAN adapter (Wi-Fi adapter) to a USB terminal. The video display may not work.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when connecting
peripheral devices.
• Pass through SD-SDI signals are not output correctly.
Note
• About USB Memory
-
- Both FAT16 and FAT32 USB memory devices are supported.
-
- Correct operation cannot be guaranteed for all USB memory devices.
-
- It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is
executed during recognition, the message [Detecting USB memory] is displayed.
Page: 9
10
Setting Up
Carrying the video display
When carrying the video display, be sure to hold it by the carrying handle.
CAUTION
• When unpacking, carrying, installing, or connecting the main unit, please note that at
least two people are required.
• When carrying the video display, handle it carefully so not to touch or damage the
screen.
Preventing from Tipping
CAUTION
• When securing the main unit to a table or desk, please ensure the table or desk is strong enough to carry the weight of the main
unit.
• For safety, make sure to perform this step with at least two people.
• Avoid touching the screen during this step as it may damage it.
• For safety reasons, when using the display for extended periods of time in a situation where it is subject to vibrations, shocks, or
is tilted (when moving in a live broadcast vehicle, etc.), take additional measures to ensure the display remains fixed, such as the
use of the screw holes on the stand or rear.
Use correct size screws that fit the screw holes on the stand to fasten it to a desk or table
Screw hole
4- 4.5
Unit: mm
Page: 10
Setting Up
11
English
Use a commercially-available belt or strap to fasten it to a wall or other surface
1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side.
2 Fasten the tips of the belt or strap to a floor or wall.
Commercially-available belt or strap
Mounting the Main Unit on a Stand or Wall
This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand ( 12).
* Commercially available.
CAUTION
• For safety, make sure to perform this step with at least two people.
• Make sure that the main unit does not fall during installation/removal.
• Avoid touching the screen during this step as it may damage it.
• When mounting the main unit on a wall, make sure the wall has sufficient strength. If necessary, apply reinforcement. Also, make
sure to check the load capacity of the stand or wall mount bracket.
• When the video display is placed on a rack or display stand and ventilation around it is blocked by equipment placed above or
below or in a surrounding area, the operating temperature may increase, causing a failure or overheating. In order to maintain the
operating temperature condition of the video display (5 ˚C to 35 ˚C), make space of at least 1U (4.4 cm) above and below and at
least 4 cm (1.6 in.) space from its back. Make sufficient space from peripheral equipment, secure vents, or install a ventilation fan.
• When installing the video display on a wall, make sufficient space from the wall so that cables are not squeezed or twisted.
1 Attach a commercially available stand or wall mount bracket using the screw holes on the back or side
face of the main unit.
Rear
4-M6
Depth 8 (Max.)
Unit: mm
Page: 11
Setting Up
12
Removing/attaching the stand
The stand can be removed when storing the display on a rack or display shelf.
CAUTION
• Make sure to perform this step with at least two people.
• Use a flat, clear surface when attaching/detaching the stands.
• The display can tip over if the stand has not been attached.
• Avoid touching the screen during this step as it may damage it.
Detaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Front stands (2): Remove the screws holding the stands (2 each).
Rear stands (4): Remove the screws holding the stands (1 each).
• Do not lose the removed screws. Do not use these screws for other purposes.
Attaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Align the position of the stand and screw hole on the video display.
• Alight the convex part of the stand and concave part of the video display.
3 Front stands (2): Fasten the screws holding the stands (2 each).
Rear stands (4): Fasten the screws holding the stands (1 each).
Rear
Screen side
Rear stand
Front stand
mounting screw hole
Mounting screw
Concave part
Convex part
Concave part
Convex part
Front stand
Page: 12
Setting Up
13
English
Attaching/detaching the AC Power Cord Clamp (provided)
Attaching
Install the AC power cord clamp before connecting the AC power cord to the main unit.
1 Insert the AC power cord clamp connector into the cord clamp
mounting hole (1).
2 Connect the AC power cord to the main unit (2).
3 Secure the AC power cord in place with the holder (3).
• The holder should always be fastened in the position as shown in the
illustration.
4 Press the holder against the main unit (4).
• Make sure that there is no slack (A).
• Pulling the holder lock lever in the direction of the arrow will allow you to
adjust the holder position (5).
Detaching
1 Pull the holder lever in the direction of the arrow (6) and remove the
AC power cord clamp from the AC power cord.
2 Press the knobs on the left and right and pull out the AC power cord
clamp from the video display (7).
2
1
3
4
A
5
6
7
Page: 13
Setting Up
14
Connecting the Main Unit to Input Devices
The video display has SDI and HDMI input terminals to connect input devices.
CAUTION
• Check that the power to the video display and input devices is switched off before connecting an input device to this display's SDI
or HDMI input terminal.
• Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable
is used, the video display may not work normally, for example, video becomes choppy or nothing is displayed.
Reference
• The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.
• When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.
• Each input terminal is compatible with through output. When signals are input from Input (IN) A, connect the cable to the SDI (OUT)
terminal of Input A.
SDI input terminal
HDMI input terminal
■
■ Signals that can be connected to the SDI input terminal
Input signal Input terminal
Quad Link
(Square Division)
12G/6G/3G/
HD-SDI
Top left, Mapping signal Input A
Single input system
Top right, Mapping signal Input B
Bottom left, Mapping signal Input C
Bottom right, Mapping signal Input D
Quad Link
(2 Sample Interleave)
3G-SDI Link 1 Input A
Single input system
Link 2 Input B
Link 3 Input C
Link 4 Input D
Dual Link 6G/3G-SDI Link 1 Input A
Two input systems
Link 2 Input B
Link 1 Input C
Link 2 Input D
Single Link 12G/6G/3G/HD/
SD-SDI
—
Input A/Input B/
Input C/Input D
Four input systems
Page: 14
Setting Up
15
English
Turning on the Main Unit's power
1 Plug the provided AC power cord to the AC power supply input terminal at the rear.
• The video display goes into standby and the power indicator lights up in amber.
2 Press the power supply button at the front.
• The power indicator lights green.
Note
• Warming-up is necessary to stabilize the brightness of the video display. Wait at least 10 minutes after turning on the power before
use.
Basic operations to use the OSD menu
The video display settings are changed from the OSD menu. Using buttons and jog dial on the video display, you can
adjust image quality and configure settings for input signals.
MENU button
Opens/closes the OSD
menu, or moves up one
level in a menu.
RESET button
Resets the items to be adjusted using the slider and
entered characters.
Jog dial
or rotation: ‌
Used to move to a different item and change
settings.
Press: 
Confirms settings or moves the selection frame up/down 1 level.
Page: 15
16
Main specifications/Performance
Panel
Panel Type IPS LCD panel
Screen Size 31.1 inch (78.91 cm)
Aspect Ratio 17:9
Resolution 4096x2160
Active Display Area Approximately 698.0 x 368.1 mm
Pixel Pitch 170 µm
Image quality
Brightness* Standard 100 cd/m2
Peak, Full screen
white
2000 cd/m2
View Angle (Up, Down, Left, Right) 89° (contrast ratio 10 : 1 or higher)
Surface Treatment Anti-glare coating
General
Backlight Type LED, direct down type
Power Rated Voltage: ‌
100 – 240 V AC    Rated Frequency: 50/60 Hz
Power consumption At maximum load (including change in brightness through aging): Approximately 840 W
At factory shipment: Approximately 175 W
Environmental
Conditions
Operating Temperature and humidity: 
5 – 35 °C (41 – 95 °F), 20 – 85 %RH (no condensation)
Recommended range of temperature and humidity: 15 –
30 ˚C  (59 – 86 °F) (20 to 80% RH, no condensation)
Pressure: 700 – 1060 hPa
Storage/
Transporting
Temperature and humidity: 
-20 – 40 ˚C (-4 – 104 °F), 10 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 10 – 30 %RH (no condensation)
Pressure: 700 – 1060 hPa
Dimensions (width x height x depth) Including stands and handle: Approx. 749×492×335 mm (29.5×19.4×13.2 in.)
Main unit only, excluding protrusions: Approx. 749×470×295 mm (29.5×18.5×11.6 in.)
Weight Approximately 31 kg (68.2 lb)
Mounting Hole Pitch VESA standard 200 x 200 mm (7.9×7.9 in.)
* ‌
Brightness values are standard values and not guaranteed values.
Page: 16
Main specifications/Performance
17
English
Interface
Input 12G/6G/3G/HD/
SD-SDI
4 BNC (75Ω) receptacle terminal
12G-SDI: Compliant with SMPTE 2082
6G-SDI: Compliant with SMPTE 2081
3G-SDI: 
Compliant with SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/
428-19/428-9
HD-SDI: Compliant with SMPTE 2048-2/274M/292-1/296/428-19/428-9
SD-SDI: Compliant with SMPTE 259M
HDMI 1 type A terminal Contents protection standard: HDCP 2.2
Output 12G/6G/3G/HD-SDI 4 (pass-thru)
Head phone 1 stereo mini jack, Supported impedance: 32 Ω to 64 Ω
Others USB 1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Compliant with Enhanced Host Controller Interface Specification for Universal Serial
Bus Revision 1.0
LAN 1 RJ-45 terminal
Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX
REMOTE 1 RJ-45 terminal, GPI 8 pins
Weight and dimensions are approximate. Errors and omissions excepted.
The information in this document is verified as of August 2019. Subject to change without notice.
Page: 17
Main specifications/Performance
18
Dimensions
615 (24.2)
749 (29.5)
470
(18.5)
492
(19.4)
200
(7.9)
200 (7.9)
615 (24.2)
121.5
(4.8)
281.5
(11.1)
161.7 (6.4)
21.1
(0.8)
112.5
(4.4)
15
(0.6)
4-M6
Depth 8 (0.3) (Max.)
Center of panel
4- 4.5 (0.2)
25.3 (1.0)
335 (13.2)
295 (11.6)
Unit: mm (inch)
Front
Rear
Side
Bottom
Page: 18
19
English
USA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED
IN THE UNITED STATES
The limited warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to Canon Professional
Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original container, when
purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other
proof of purchase.
Canon USA warrants to the original end-user purchaser, when delivered in new condition in its original container, that
the Equipment will be free from defects in materials and workmanship under normal use and service for a period of
ONE-YEAR from the date of original purchase. When returning Equipment under this warranty, you must pre-pay
the shipping charges, and you must enclose a copy of the Bill of Sale or other proof of purchase with a complete
explanation of the problem. Equipment returned to a Canon USA factory service facility, and proven to be defective
upon inspection, will be, without charge,:
(a) repaired utilizing new or comparable refurbished parts, or
(b) exchanged for refurbished or new Equipment
as determined in the Canon USA’s repair facility’s sole discretion. The repaired or exchanged Equipment will be shipped
back free of charge. Warranty exchange or replacement does not extend the original warranty period of the Equipment.
For repairs after the warranty period has expired, an estimate of the cost of repair and an opportunity to approve or
reject the repair expense before it is incurred will be provided. If you approve, repairs will be made and the Equipment
will be returned at your risk and expense. If you reject, the Equipment will be returned to you at no charge to you to an
address within the United States.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer
equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will
have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the
Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non-
Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on,
the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty
regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-
Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk
drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss
in the event of failure or other malfunction of such drive.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the
Equipment or contact the CANON INFORMATION CENTER AT 855-4K-CANON (855-452-2666) or on the internet at
pro.usa.canon.com/support. You will be directed to the nearest service facility for your Equipment.
Technical support program specifics subject to change without notice.
This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the
following cases:
A. Loss or damage to the Equipment due to abuse, neglect, mishandling, electric current fluctuation, accident,
improper maintenance, use of non-Canon accessories or failure to follow operating, maintenance or
environmental instructions prescribed in Canon USA’s user’s manual;
B. If the Equipment is defective as a result of sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon USA) that
cause damage to the Equipment or that cause abnormally frequent service calls or service problems;
D. If defects or damages are caused by service other than Canon USA's factory service centers or authorized
service facilities;
E. Any internal modification to product hardware or firmware;
F. Any maintenance of the Equipment, including any fees for such Maintenance;
G. If the Equipment has had its serial number or dating altered or removed.
Page: 19
20
This Limited Warranty does not apply to Equipment purchased outside the United States. This Limited Warranty does
not apply to accessories or consumables for the Equipment, which are sold "AS IS", without warranty of any kind by
Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card
ensures that you are contacted promptly should there be a safety inspection, modification or product recall under
applicable laws or regulations.This card ensures that you are contacted promptly should there be a safety inspection,
modification or product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES
OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR
CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED
ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE
LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE
GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC
Page: 20
21
English
CANADA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN
CANADA
The limited warranty set forth below is given by Canon Canada Inc. ('Canon Canada') with respect to Canon
Professional Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original
container, when purchased in Canada. This limited warranty is only effective upon presentation of your bill of sale or
other proof of purchase.
Canon Canada warrants to the original end-user purchaser, when delivered in new condition in its original container,
that the Equipment will be free from defects in materials and workmanship under normal use and service for a period
of ONE YEAR from the date of original purchase. When returning Equipment under this limited warranty, you must pre-
pay the shipping charges, and you must enclose a copy of the bill of sale or other proof of purchase with a complete
explanation of the problem. Equipment returned to a Canon Canada factory service facility and proven to be defective
upon inspection will be, without charge:
(a) repaired utilizing new or comparable refurbished parts, or
(b) exchanged for refurbished or new Equipment,
as determined by the Canon Canada factory service center, in its sole discretion. The repaired or exchanged Equipment
will be shipped back free of charge. Warranty exchange or replacement does not extend the original warranty period of
the Equipment. For repairs after the warranty period has expired, an estimate of the cost of repair and an opportunity
to approve or reject the repair expense before it is incurred will be provided. If you approve the proposed repairs,
repairs will be made and the Equipment will be returned at your risk and expense. If you reject the proposed repairs,
the Equipment will be returned to you at no charge to you to an address within Canada.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer
equipment, compatible peripheral equipment and compatible software, as to which items Canon Canada
will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use
of the Equipment in conjunction with incompatible computer equipment, peripheral equipment and/or
incompatible software. Non-Canon brand peripheral equipment and software which may be distributed
with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty or condition of any kind
by Canon Canada, including any implied warranty or condition regarding merchantability or fitness for
a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the
manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends
that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other
malfunction of such drive.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the
Equipment or contact the CANON INFORMATION CENTER at 800-667-2666 or on the internet at www.canon.ca/
pro.
Technical support program specifics are subject to change without notice.
This limited warranty covers all defects encountered in normal use of the Equipment and does not apply in the following
cases:
A. Loss or damage to the Equipment due to abuse, neglect, mishandling, electric current fluctuation, accident,
improper maintenance, use of non-Canon accessories or failure to follow operating, maintenance or
environmental instructions prescribed in Canon Canada’s users manual;
B. If the Equipment is defective as a result of sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon Canada) that
cause damage to the Equipment or that cause abnormally frequent service calls or service problems
D. If defects or damages are caused by service other than Canon Canada's factory service centers or authorized
service facilities;
E. Any internal modification to product hardware or firmware;
F. Any maintenance of the Equipment, including any fees for such maintenance; or
G. If the Equipment has had its serial number or dating altered or removed.
Page: 21
22
This limited warranty does not apply to Equipment purchased outside Canada. This limited warranty does not apply to
accessories or consumables for the Equipment, which are sold "AS IS", without warranty or condition of any kind by
Canon Canada. Please retain this warranty card and your bill of sale or other proof of purchase as a permanent record
of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification
or product recall under applicable laws or regulations.
NO IMPLIED WARRANTY OR CONDITION, INCLUDING IN RESPECT OF THE MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THIS EQUIPMENT AFTER THE EXPIRATION OF
THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTEE UNDER THIS LIMITED WARRANTY
(EXCEPT AS MENTIONED ABOVE). (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA,
INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT’S
HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY
THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER
THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE
NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from province to
province.
CANON CANADA INC.
Page: 22
USA http://pro.usa.canon.com
CANON U.S.A., INC.
http://pro.usa.canon.com/support
(855) 4K-CANON (855-452-2666)
(USA only)
UNITED KINGDOM
Canon UK Ltd
Unit 160, Centennial Park, Centennial Avenue,
Elstree, Hertfordshire, WD6 3SG
020-7660-0186
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com
PUB. MIM-0060-A
MIE-0022-000 © CANON INC. 2019

Question & answers

There are no questions about the Canon DP-V3120 yet.

Ask a question about the Canon DP-V3120

Have a question about the Canon DP-V3120 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Canon DP-V3120. Please make sure that you describe your difficulty with the Canon DP-V3120 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.