Braun DigiFrame 7 manual

View a manual of the Braun DigiFrame 7 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Braun
  • Product: Digital Photo Frame
  • Model/name: DigiFrame 7
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian

Table of Contents

Page: 8
E N G L I S H 9
Contents
Important Safety Precautions................................9
Cleaning the LCD screen .......................................9
Cleaning the Digital Picture Frame.........................9
Introduction........................................................10
Box Content........................................................10
Setting up the Digital Picture Frame ....................11
Control Buttons and Remote Control ...................11
Using the control buttons....................................11
Using the remote control.....................................12
Card selection screen..........................................12
Thumbnail screen ...............................................12
Displaying a single photo full screen ...................13
Changing the displayed photo manually...............13
Rotating a photo .................................................13
Enlarging a photo................................................13
Copying displayed photo to built-in memory........13
Deleting the displayed photo ...............................13
Adjusting the LCD color ......................................13
Setting date and time
(only model with this function)............................14
Setting Viewing Options......................................14
Connecting a USB Flash Drive .............................15
Frequently Asked Questions ................................15
Technical Specifications......................................16
Important Safety Precautions
Always follow these basic safety precautions when
using your Digital Picture Frame. This will reduce
the risk of fire, electric shock, and injury.
Warning:To reduce the risk of fire or shock hazard,
do not expose this product to rain or moisture.
Warning:To prevent the risk of electric shock, do
not remove the cover. There are no user-service-
able parts inside. Refer all servicing to qualified
personnel.
• The Digital Picture Frame is for indoor use only.
• Unplug the Digital Picture Frame before
performing care and maintenance.
• Do not block the ventilation holes on the back of
the Digital Picture Frame.
• Keep your Digital Picture Frame out of direct
sunlight and heat sources.
• Protect the power cord. Route power cords so
that they are not likely to be walked on or pinched
by items placed on or against them. Pay particu-
lar attention to the point where the cord is
plugged into the Digital Picture Frame.
• Only use the AC adapter included with the Digital
Picture Frame. Using any other power adapter will
void your warranty.
• Unplug the power cord from the outlet when the
Digital Picture Frame is not in use.
Cleaning the LCD screen
Treat the screen gently. The screen is made of
glass and can be scratched or broken.
To clean fingerprints or dust from the LCD screen,
we recommend using a soft, non-abrasive cloth
such as a camera lens cloth.
If you use a commercial LCD cleaning kit, do not
apply the cleaning liquid directly to the LCD screen,
but moisten a soft cloth with the liquid.
Cleaning the Digital Picture Frame
Clean the outer surface of the Digital Picture Frame
(excluding the screen) with a soft cloth moistened
with water.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 1
Page: 9
E N G L I S H
1 0
Introduction
Welcome to the Digital Picture Frame!
Now you can display your digital photos directly
from your memory card without needing a compu-
ter. Simply insert a memory card into the Digital
Picture Frame, turn it on, and you will be treated to
a slideshow of your photos.
It's as easy as that.
You can also display individual photos.
To learn more about your new Digital Picture
Frame's features and take full advantage of them,
please take a few minutes to read this User Guide.
Important!
Please note that this DigiFrame is available in
different versions with or without video, MP3
or date/time function. The detailed features of
each Digital Picture Frame are specified on the
package.
The Digital Picture Frame offers the
following key features:
• Displaying digital photos (JPEG) without
a computer.
• Simply insert a compatible memory card
(memory card not included) into the Digital
Picture Frame to show photos, play music or
supported video files (only model with video
and MP3 functions).
• Compatible memory cards include Secure Digi-
tal™ (SD+SDHC), MultiMedia Card™, Memory
Stick™, Memory Stick Pro™, Memory Stick
Duo™, and Memory Stick Pro Duo™.
• Clock and calendar function (only for model
with this function).
• Main functions are controlled via the buttons on
the frame or the included infrared remote control.
• Bright TFT LCD screen.
• USB 2.0
• Built-in memory.
Box Content
• Digital Picture Frame
• AC power adapter (5 V, 1 A)
• User Guide
• Remote control
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 2
Page: 10
E N G L I S H 1 1
Setting up the Digital Picture Frame
The Digital Picture Frame is easy to set up.
Just follow these steps:
1. Connect the AC power adapter to the Digital
Picture Frame and a wall outlet.
2. Insert a memory card into the appropriate slot.
Slot 1: Secure Digital™ (SD+SDHC), MultiMedia
Card™, Memory Stick™, Memory Stick Pro™,
Memory Stick Duo™, or Memory Stick Pro Duo™
Slot 2: USB Flashdrive
Note: The card will only fit in one direction.
Do not force it. The card should fit snugly when
properly inserted. The Digital Picture Frame
will automatically start a slideshow of the photos
on the card.
3. To display photos individually, press the EXIT
button to open the thumbnail screen. Use the
four arrow buttons to choose a photo. Press the
Play button (>II) on the top of the Digital Picture
Frame or the ENTER button on the remote
control.
Note: Pull the plastic tab sticking out of the
remote control. It protects the battery, and the
remote control will not work unless it is
removed.
4. To restart the slideshow, press the Play button
(>II) on the Digital Picture Frame again, or press
the SLIDESHOW button on the remote control.
Control Buttons and Remote Control
You can access all of the Digital Picture Frame fea-
tures either with the buttons on top of the frame or
via the remote control.
Using the control buttons
The control buttons are located on top of the Digital
Picture Frame.
Button Action
LEFT Move highlighting left
Display previous photo
Select previous file
PLAY/ Select highlighted option
PAUSE Start slideshow
Pause
Play
RIGHT Move highlighting right
Display next photo
Select next file
EXIT Exit current screen
Go back a screen
SETUP Open control and setup menu
Holes for
wallmount
USB
Card Slot
SD/MMC/MS
DC Power Input
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 3
Page: 11
E N G L I S H
1 2
Using the remote control
The remote control included with your Digital Pic-
ture Frame may look slightly different from the one
shown here, but it offers the same buttons and
functions.
POWER Press POWER to turn on and off
the frame
SETUP Press for setup
 Left
 Right
 Up
 Down
ENTER Confirm your operation PAUSE/PLAY
EXIT Exit to the previous menu
ROTATE Rotate Pictures at 90/180/270°
ZOOM Zoom in the photo
SLIDESHOW Slideshow your digital pictures at the
desired transition effect
Replacing the remote control battery
1. Hold the remote control with the control buttons
facing downward.
2. While pressing the ridged lug of the battery
cover to the inside, pull the tray out.
3. Place a CR2025 lithium battery on the tray with
the positive "+" end facing toward you.
4. Close the tray.
Card selection screen
Use the Select Card menu to choose between
memory cards and the built-in memory.
1. To open the Select Card menu, press the EXIT
button repeatedly to return to the menu screen.
2. Press the left and right arrow buttons to select
the desired memory card or the built-in memory
or the calendar.
3. Press the ENTER button to confirm your
selection.
Thumbnail screen
This screen shows thumbnail versions of all photos
on the selected memory source. Up to 6 photos are
displayed at a time. Use this screen to select a
single photo to be displayed or to start a slideshow
of all photos.
1. Press the arrow buttons on the remote control or
Digital Picture Frame until the desired photo is
highlighted. The photo file name will be display-
ed at the top of the screen.
2. Press the SLIDESHOW button to start the
slideshow with the selected photo.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 4
Page: 12
E N G L I S H 1 3
3. To stop the slideshow and return to the
thumbnail screen, press the EXIT button.
Displaying a single photo full screen
You can choose a single photo to be displayed
without a slideshow.
1. With the thumbnail screen displayed, select a
photo and press ENTER to display the selected
photo on the full screen.
2. Press the left arrow button to go to the previous
photo.
3. Press the right arrow button to display the next
photo.
4. To stop the full screen display and return to the
thumbnail screen, press the EXIT button.
Changing the displayed photo manually
During a slideshow, each photo replaces the
previous one at the interval set for the slideshow
speed in the Setup menu.
You can also change the displayed photo at any
time during a slideshow, press the ENTER (PLAY/
PAUSE) button.
• Press the left arrow button to go to the previous
photo.
• Press the right arrow button to display the next
photo.
Rotating a photo
You can rotate a photo displayed in full screen
mode using the remote control.
Press the ROTATE button to rotate the photo 90°
clockwise.
Enlarging a photo
To magnify a photo displayed in full screen mode,
press the ZOOM button.
Copying displayed photo to built-in
memory
Use the remote control to copy the displayed photo
from the memory card to the built-in memory.
1. Press the SETUP button to open the menu.
2. Press the up or down arrow button to select
Copy Photo.
3. Press ENTER. A confirmation message will be
displayed.
4. Press EXIT to close the menu.
Deleting a displayed photo
When displaying a photo, you can delete it with the
remote control.
1. Press the SETUP button to open the menu.
2. Press the up or down arrow button to select
Delete Photo.
3. Press ENTER. A confirmation message is
displayed.
4. Press EXIT to close the menu.
Adjusting the LCD color
This option is used to adjust the brightness, con-
trast, tone, and colour of the display.
1. Press the SETUP button to open the Setup menu.
2. Press the up or down arrow buttons to select
Color.
3. Press ENTER. A second menu opens.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 5
Page: 13
E N G L I S H
1 4
4. Use the arrow buttons Brightness, Contrast,
Saturation and Hue to select the option to be
adjusted.
5. Use the left and right arrow buttons to select the
desired value. The display will change according
to the selected setting.
6. When the display looks the way you want it to,
press ENTER (PLAY/PAUSE) to close the menu.
Setting date and time
(only for model with this function)
Open the card select/calendar display and use the
left/right arrow button to select the icon for the
calender. Press SETUP to open the setting options.
Use the SETUP button to activate the fields for date
in the following order: MM, DD, YYYY.
Use the SETUP button to activate the fields for time
in the following order: hh, mm. Time is displayed
in 24 hour mode. Use the left/right arrow button to
change the displayed values. Press ENTER to save
the settings.
Setting Viewing Options
You can control all viewing options in the Setup
menu using the buttons on the top of the frame or
the remote control. You can display the on-screen
Setup menu any time the Digital Picture Frame is
not displaying photos or videos by pressing the
SETUP button.
1. To display the Setup menu during a slideshow,
press the EXIT button followed by the SETUP
button.
2. With the Setup menu open, use the up and
down arrow buttons to choose a viewing option.
3. Press ENTER to select the respective option.
A second menu will open listing the available
settings.
4. Use the up and down arrow buttons to choose
the desired setting.
5. Press ENTER to confirm the setting. The second
menu closes.
6. You can make any changes to the viewing
options in this manner. When you are finished,
press the EXIT button to close the Setup menu
and return to the thumbnail screen.
7. The following table lists the viewing options in
the Setup menu as well as the available settings
and their effects.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 6
Page: 14
E N G L I S H 1 5
Connecting a USB Flash Drive
Your Digital Picture Frame will see a USB Flash
Drive the same way it sees memory cards.
Frequently Asked Questions
Q: How do I set up my Digital Picture Frame?
A: It is very simple to get your Digital Picture Frame
out of the box and running in just a few minutes.
Just plug the power adapter into the Digital
Picture Frame and into a standard wall socket.
Insert a memory card into the appropriate card
slot on the side of the Digital Picture Frame, and
turn it on. Your first slideshow will automatically
start to play.
Q: What memory cards can the Digital Picture
Frame read?
A: Compatible memory cards include Secure Digi-
tal™ (SD+SDHC), MultiMedia Card™, Memory
Stick™, Memory Stick Pro™, Memory Stick
Duo™, and Memory Stick Pro Duo™.
Q: I set up the Digital Picture Frame. Why won't it
turn on?
A: The adapter is not securely connected to the
Digital Picture Frame
Q: I have a memory card in the Digital Picture
Frame. Why can't I view my photos?
A: First, make sure that the memory card is one of
the formats listed above and that the files on the
card are JPEG image files. Second, turn the
Digital Picture Frame off and make sure that the
memory card is inserted all the way into the card
slot and is facing in the correct direction. Third,
turn the frame on. After a couple of seconds, you
should see your first photo. Press EXIT to open
the Select Card screen and select the card. Then
select PHOTO. You should see the thumbnail
screen listing all photos on the card. If you
don't, you may want to try another card.
Note: Some digital cameras save images in other
formats. Please refer to your camera's manual if
your photos are not JPEG files.
Q: Why is the picture display slower with some
pictures and faster with others?
A: Higher resolution pictures load more slowly.
Try using lower resolution pictures or down
sampling your images. See your camera's
operating manual for details on down sampling
photos.
Q: Can I insert multiple memory cards?
A: Yes. Turn on the Digital Picture Frame before
inserting any card. The Select Card screen lets
you choose between all available memory cards.
Q: Does the Digital Picture Frame have a built-in
memory?
A: Yes. The volume depends on your model.
Q: Does the Digital Picture Frame support all JPEG
files?
A: No, it supports JPEG files taken from a digital
camera. The Digital Picture Frame may not read
all image files downloaded from the internet or
from other software graphics applications.
Viewing Option Settings Description
Display Image Size Stretch/Crop/Original The Digital Picture Frame can optimise the display
of your photos to the screen size.
Slideshow Transition Special effects used for the transition from one
photo to the next in a slideshow.
Slideshow Speed 3S Defines the speed of the slideshow
10S (display interval of photos).
60S
2 hours
Factory Default Immediately resets all settings to the factory
defaults. There is no warning message.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 7
Page: 15
E N G L I S H
1 6
Technical Specifications
Product: 7.0" LCD screen Digital Picture
Frame
Resolution: 374 x 234 pixel (16:10)
Internal memory: See package specifications
Memory card Secure Digital™ (SD+SDHC),
formats: MultiMedia Card™, Memory
Stick™, Memory Stick Pro™, Me-
mory Stick Duo™, Memory Stick
Pro Duo™ and USB Flash Drives
File formats: Standard JPEG
Features: Slideshow mode
Multiple transitional styles for
slideshow
Variable speed for slideshow
Stand for optimum viewing angle
USB Ports: USB 2.0
Power input: 100 V - 240 V AC, 50 Hz
Output: 5 V DC, 1 A
Dimensions: approx. 232 x 168 x 40 mm
Weight: approx. 500 g
Certification: CE/RoHS
Design and specifications are subject to change without
notice.
This symbol on the product or in the
instructions means that your electrical
and electronic equipment should be
disposed at the end of its life separately
from your household waste. There are
separate collection systems for recycling
in the EU. For more information, please
contact the local authority or your retai-
ler where you purchased the product.
BN, BA_DF7_0110_GB.qxd 25.01.2010 9:17 Uhr Seite 8

Question & answers

There are no questions about the Braun DigiFrame 7 yet.

Ask a question about the Braun DigiFrame 7

Have a question about the Braun DigiFrame 7 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Braun DigiFrame 7. Please make sure that you describe your difficulty with the Braun DigiFrame 7 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.