Braun Cruzer 6 Heard&Beard manual

View a manual of the Braun Cruzer 6 Heard&Beard below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Braun
  • Product: Beard Trimmer
  • Model/name: Cruzer 6 Heard&Beard
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
cruZer
cruZer 6
beard&head
Type 5417
92268478_beard-head_Japan.indd 1
92268478_beard-head_Japan.indd 1 22.03.12 11:47
22.03.12 11:47
Booklet, 88 x 165 mm, 28 pages, 1/1c = cyan + black
Page: 1
3
92268478_beard-head_Japan.indd 3
92268478_beard-head_Japan.indd 3 22.03.12 11:47
22.03.12 11:47
Page: 2
4
92268478_beard-head_Japan.indd 4
92268478_beard-head_Japan.indd 4 22.03.12 11:47
22.03.12 11:47
Page: 3
5
92268478_beard-head_Japan.indd 5
92268478_beard-head_Japan.indd 5 22.03.12 11:47
22.03.12 11:47
Page: 4
6
92268478_beard-head_Japan.indd 6
92268478_beard-head_Japan.indd 6 22.03.12 11:47
22.03.12 11:47
Page: 5
7
92268478_beard-head_Japan.indd 7
92268478_beard-head_Japan.indd 7 22.03.12 11:47
22.03.12 11:47
Page: 6
8
STOP
92268478_beard-head_Japan.indd 8
92268478_beard-head_Japan.indd 8 22.03.12 11:47
22.03.12 11:47
Page: 7
9
92268478_beard-head_Japan.indd 9
92268478_beard-head_Japan.indd 9 22.03.12 11:47
22.03.12 11:47
Page: 8
10
92268478_beard-head_Japan.indd 10
92268478_beard-head_Japan.indd 10 22.03.12 11:47
22.03.12 11:47
Page: 9
11
click!
click!
92268478_beard-head_Japan.indd 11
92268478_beard-head_Japan.indd 11 22.03.12 11:47
22.03.12 11:47
Page: 10
12
92268478_beard-head_Japan.indd 12
92268478_beard-head_Japan.indd 12 22.03.12 11:47
22.03.12 11:47
Page: 11
13
click!
92268478_beard-head_Japan.indd 13
92268478_beard-head_Japan.indd 13 22.03.12 11:47
22.03.12 11:47
Page: 12
14
92268478_beard-head_Japan.indd 14
92268478_beard-head_Japan.indd 14 22.03.12 11:47
22.03.12 11:47
Page: 13
15
1 2 3
4 5 6
7
Ni-MH
92268478_beard-head_Japan.indd 15
92268478_beard-head_Japan.indd 15 22.03.12 11:47
22.03.12 11:47
Page: 14
16
92268478_beard-head_Japan.indd 16
92268478_beard-head_Japan.indd 16 22.03.12 11:47
22.03.12 11:47
Page: 15
17
92268478_beard-head_Japan.indd 17
92268478_beard-head_Japan.indd 17 22.03.12 11:47
22.03.12 11:47
Page: 16
18
9
1a
2
1h
3
4
5
6
7
8
1b
STOP
click!
a
1c
1c
92268478_beard-head_Japan.indd 18
92268478_beard-head_Japan.indd 18 22.03.12 11:47
22.03.12 11:47
Page: 17
19
oil
b
c d
e
i
g
f
h
oil
huile
click!
92268478_beard-head_Japan.indd 19
92268478_beard-head_Japan.indd 19 22.03.12 11:47
22.03.12 11:47
Page: 18
20
English
Our products are designed to meet the highest standards of
quality, functionality and design. We hope you entirely enjoy
your new Braun product.
Warning
• The appliance is provided with a special cord set with an
integrated Safety Extra Low Voltage power supply. Do not
exchange or manipulate any part of it. Otherwise there is
risk of electric shock.
• Never use the appliance with damaged trimmers or special
cord set.
• This appliance is not intended for use by children or persons
with reduced physical, sensory or mental capabilities,
unless they are given supervision by a person responsible
for their safety. In general, we recommend that you keep
the appliance out of reach of children. Children should be
supervised to ensure that they do not play with the
appliance.
Oil bottle
Keep out of reach of children. Do not swallow. Do not apply
to eyes. Dispose of properly when empty.
Description
1a Beard comb for trimming beard and short hair
1b Hair comb for cutting hair
1c Release buttons for comb
2 Wide trimmer (32 mm)
3 Precision trimmer (16 mm)
4 Release button precision trimmer
5 Charge Indicator
6 Length selector
7 On/off switch
8 Special cord set
9 Pouch
Charging
The best environmental temperature for charging is between
15 °C and
35 °C. Do not expose the appliance to temperatures higher
than 50 °C for extended periods of time.
• Using the special cord set (8), connect the appliance to an
electrical outlet with the motor switched off.
• When charging for the first time or when the appliance is
not used for a few months, leave the appliance to charge
continuously for 4 hours.
92268478_beard-head_Japan.indd 20
92268478_beard-head_Japan.indd 20 22.03.12 11:47
22.03.12 11:47
Page: 19
21
• Once the appliance is completely charged, discharge it
through normal use. Then recharge to full capacity.
Subsequent charges will take about 1 hour.
• A full charge provides up to 40 minutes of cordless
operating time. This may vary according to your beard
growth.
• Maximum battery capacity will only be reached after
several charging/discharging cycles.
Charge Indicator (5)
• The charge indicator shows the status of the batteries.
• The charge indicator blinks green when the appliance is
being charged. When the battery is fully charged, the
charge indicator shines permanently green provided the
appliance is connected to an electrical outlet.
• During cordless use the charge indicator blinks green.
• The charge indicator flashes red when the battery is
running low. You should be able to finish your current
trimming sequence.
Comb attachments (1a, 1b)
• The combs can be taken off by pressing the release
buttons (1c) with your thumb and forefinger.
Beard trimming
• Place the beard comb (1a) on the appliance with the
appliance turned off (a).
• Press length selector (6) and slide the beard comb up to
your desired beard length (possible length settings: 1, 3, 5,
7, 9, 11 mm).
• It is advisable to begin with the highest setting and then
reduce the setting until you reach the desired beard length.
• Press the on/off switch (7). Hold the beard comb with the
angled edge against your beard and guide the trimmer
against the direction of the hair growth (a).
• To avoid clogging the beard comb with hair, clean it from
time to time with the brush.
Contour Trimming / Styling
• The wide trimmer (2) evenly cuts and trims large areas. It is
ideal for shaping sideburns, moustaches and partial short
beards. Take off the comb. While stretching the skin, guide
the wide trimmer against the direction of hair growth (b).
92268478_beard-head_Japan.indd 21
92268478_beard-head_Japan.indd 21 22.03.12 11:47
22.03.12 11:47
Page: 20
22
• The precision trimmer (3) precisely defines lines and edges
and is ideal for precise contouring. To use the precision
trimmer, press the release button (4) and slide it up (c).
Hair cutting
The hair should be clean, well combed, tangle-free and dry.
• Place the hair comb (1b) on the appliance with the appliance
turned off (d).
• Press the length selector (6) and slide the hair comb up to
your desired hair length (possible length settings: 10, 12,
14, 16, 18, 20 mm). If you are not used to clipping hair,
begin with a highest setting and then reduce the setting to
avoid cutting more hair than desired. If you want to cut
your hair shorter than 10 mm, we advise to first cut it with
the hair comb (1b) down to 10 mm and then use the beard
comb for the desired length.
• Use a slow and controlled movement. Do not force the
appliance through the hair faster than it can be cut.
• In between, shake or blow off the hair. If too much hair is
caught in the comb, remove and clean it.
Cleaning
The appliance is suitable for cleaning under running
tap water. Warning: Detach the appliance from the
power supply before cleaning it with water.
Regular cleaning ensures better trimming performance.
Cleaning with the brush
• Switch off the appliance. Open the wide trimmer by
pressing with the thumb against the trimmer from the front
side. It opens by ca. 45° and can also be taken off (h).
• Using the brush clean the trimmers and the space behind
the wide trimmer (inside the housing).
Cleaning with water
• Switch off the appliance and rinse the head and trimmers
under warm running water. You can also rinse the opened
wide trimmer.
• Leave the appliance with opened wide trimmer to dry.
Keeping your appliance in top shape
To keep the cutting system working properly, oil it with light
machine oil after each use (i).
92268478_beard-head_Japan.indd 22
92268478_beard-head_Japan.indd 22 22.03.12 11:47
22.03.12 11:47
Page: 21
23
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable
batteries, the appliance has to be fully discharged (by
trimming/cutting) every 6 months approximately. Then
recharge the appliance to full capacity.
Environmental notice
This product contains rechargeable batteries. In the
interest of protecting the environment, please do not
dispose of the product in the household waste at the
end of its useful life. Disposal can take place at a
Braun Service Centre or at appropriate collection
points provided in your country.
Subject to change without notice.
For electric specifications, see printing on the special cord
set.
92268478_beard-head_Japan.indd 23
92268478_beard-head_Japan.indd 23 22.03.12 11:47
22.03.12 11:47
Page: 22
92268478_beard-head_Japan.indd 27
92268478_beard-head_Japan.indd 27 22.03.12 11:47
22.03.12 11:47
Page: 23
92268478/III-12
92268478_beard-head_Japan.indd 28
92268478_beard-head_Japan.indd 28 22.03.12 11:47
22.03.12 11:47

Question & answers

There are no questions about the Braun Cruzer 6 Heard&Beard yet.

Ask a question about the Braun Cruzer 6 Heard&Beard

Have a question about the Braun Cruzer 6 Heard&Beard but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Braun Cruzer 6 Heard&Beard. Please make sure that you describe your difficulty with the Braun Cruzer 6 Heard&Beard as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.